X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=INSTALL;h=21eaa0ac7e932a9a2f039924feffacb514114029;hb=922b18888a177879df1569d1969abfcaa0090a6f;hp=de8017ae2e0cf107a1dddf45c39eec3b0d914b91;hpb=49cb0e56d106a6666efa8660569a458b7eb3368b;p=p5sagit%2Fp5-mst-13.2.git
diff --git a/INSTALL b/INSTALL
index de8017a..21eaa0a 100644
--- a/INSTALL
+++ b/INSTALL
@@ -6,7 +6,7 @@ Install - Build and Installation guide for perl5.
First, make sure you are installing an up-to-date version of Perl. If
you didn't get your Perl source from CPAN, check the latest version at
-.
+.
The basic steps to build and install perl5 on a Unix system
with all the defaults are:
@@ -113,8 +113,42 @@ currently installed modules.
=head1 WARNING: This version requires a compiler that supports ANSI C.
-If you find that your C compiler is not ANSI-capable, try obtaining
-GCC, available from GNU mirrors worldwide (e.g. ftp://ftp.gnu.org/pub/gnu).
+Most C compilers are now ANSI-compliant. However, a few current
+computers are delivered with an older C compiler expressly for
+rebuilding the system kernel, or for some other historical reason.
+Alternatively, you may have an old machine which was shipped before
+ANSI compliance became widespread. Such compilers are not suitable
+for building Perl.
+
+If you find that your default C compiler is not ANSI-capable, but you
+know that an ANSI-capable compiler is installed on your system, you
+can tell F to use the correct compiler by means of the
+C<-Dcc=> command-line option -- see L<"gcc">.
+
+If do not have an ANSI-capable compiler there are several avenues open
+to you:
+
+=over 4
+
+=item *
+
+You may try obtaining GCC, available from GNU mirrors worldwide,
+listed at . If, rather than
+building gcc from source code, you locate a binary version configured
+for your platform, be sure that it is compiled for the version of the
+operating system that you are using.
+
+=item *
+
+You may purchase a commercial ANSI C compiler from your system
+supplier or elsewhere. (Or your organization may already have
+licensed such software -- ask your colleagues to find out how to
+access it.) If there is a README file for your system in the Perl
+distribution (for example, F), it may contain advice on
+suitable compilers.
+
+=item *
+
Another alternative may be to use a tool like ansi2knr to convert the
sources back to K&R style, but there is no guarantee this route will get
you anywhere, since the prototypes are not the only ANSI features used
@@ -128,6 +162,11 @@ If you succeed in automatically converting the sources to a K&R compatible
form, be sure to email perlbug@perl.com to let us know the steps you
followed. This will enable us to officially support this option.
+=back
+
+Although Perl can be compiled using a C++ compiler, the Configure script
+does not work with some C++ compilers.
+
=head1 Space Requirements
The complete perl5 source tree takes up about 20 MB of disk space.
@@ -458,9 +497,9 @@ network. One way to do that would be something like
As a final catch-all, Configure also offers an $otherlibdirs
variable. This variable contains a colon-separated list of additional
-directories to add to @INC. By default, it will be set to
-$prefix/site_perl if Configure detects that you have 5.004-era modules
-installed there. However, you can set it to anything you like.
+directories to add to @INC. By default, it will be empty.
+Perl will search these directories (including architecture and
+version-specific subdirectories) for add-on modules and extensions.
=item Man Pages
@@ -631,6 +670,52 @@ or by
Eventually (by perl v5.6.0) this internal confusion ought to disappear,
and these options may disappear as well.
+=head2 64 bit support.
+
+If your platform does not have 64 bits natively, but can simulate them with
+compiler flags and/or C or C, you can build a perl that
+uses 64 bits.
+
+There are actually two modes of 64-bitness: the first one is achieved
+using Configure -Duse64bitint and the second one using Configure
+-Duse64bitall. The difference is that the first one is minimal and
+the second one maximal. The first works in more places than the second.
+
+The C does only as much as is required to get 64-bit
+integers into Perl (this may mean, for example, using "long longs")
+while your memory may still be limited to 2 gigabytes (because your
+pointers could still be 32-bit). Note that the name C<64bitint> does
+not imply that your C compiler will be using 64-bit Cs (it might,
+but it doesn't have to): the C means that you will be
+able to have 64 bits wide scalar values.
+
+The C goes all the way by attempting to switch also
+integers (if it can), longs (and pointers) to being 64-bit. This may
+create an even more binary incompatible Perl than -Duse64bitint: the
+resulting executable may not run at all in a 32-bit box, or you may
+have to reboot/reconfigure/rebuild your operating system to be 64-bit
+aware.
+
+Natively 64-bit systems like Alpha and Cray need neither -Duse64bitint
+nor -Duse64bitall.
+
+ NOTE: 64-bit support is still experimental on most platforms.
+ Existing support only covers the LP64 data model. In particular, the
+ LLP64 data model is not yet supported. 64-bit libraries and system
+ APIs on many platforms have not stabilized--your mileage may vary.
+
+=head2 Long doubles
+
+In some systems you may be able to use long doubles to enhance the
+range and precision of your double precision floating point numbers
+(that is, Perl's numbers). Use Configure -Duselongdouble to enable
+this support (if it is available).
+
+=head2 "more bits"
+
+You can "Configure -Dusemorebits" to turn on both the 64-bit support
+and the long double support.
+
=head2 Selecting File IO mechanisms
Previous versions of perl used the standard IO mechanisms as defined in
@@ -1515,6 +1600,36 @@ to include the GNU utils before running Configure, or specify the
vendor-supplied utilities explicitly to Configure, for example by
Configure -Dar=/bin/ar.
+=item THIS PACKAGE SEEMS TO BE INCOMPLETE
+
+The F program has not been able to find all the files which
+make up the complete Perl distribution. You may have a damaged source
+archive file (in which case you may also have seen messages such as
+C and C), or you may have obtained a structurally-sound but
+incomplete archive. In either case, try downloading again from the
+official site named at the start of this document. If you do find
+that any site is carrying a corrupted or incomplete source code
+archive, please report it to the site's maintainer.
+
+This message can also be a symptom of using (say) a GNU tar compiled
+for SunOS4 on Solaris. When you run SunOS4 binaries on Solaris the
+run-time system magically alters pathnames matching m#lib/locale# - so
+when tar tries to create lib/locale.pm a differently-named file gets
+created instead.
+
+You may find the file under its assumed name and be able to rename it
+back. Or use Sun's tar to do the extract.
+
+=item invalid token: ##
+
+You are using a non-ANSI-compliant C compiler. See L.
+
+=item lib/locale.pm: No such file or directory
+
+See L.
+
=item Miscellaneous
Some additional things that have been reported for either perl4 or perl5: