X-Git-Url: http://git.shadowcat.co.uk/gitweb/gitweb.cgi?a=blobdiff_plain;f=.travis.yml;h=8ba45b2b58a581e3a693368ad3287955bd51de19;hb=d8cf3aa31fb3d6ff7813f021fcc002663725fc41;hp=f036df198ad24d3ce39a3185b85b5b0838fbbf16;hpb=0ba0c34f5e323beb418833a43914cd80ca5d1bb9;p=dbsrgits%2FDBIx-Class.git diff --git a/.travis.yml b/.travis.yml index f036df1..8ba45b2 100644 --- a/.travis.yml +++ b/.travis.yml @@ -6,37 +6,14 @@ # # * Minimum perl officially supported by DBIC is 5.8.3. This *includes* the # basic depchain. On failure either attempt to fix it or bring it to the -# attention of ribasushi. *DO NOT* disable 5.8 testing - it is here for a -# reason -# -# * The matrix is built from two main modes - CLEANTEST = [true|false]. -# - In the first case we test with minimal deps available, and skip everything -# listed in DBIC::OptDesps. The modules are installed with classic CPAN -# invocations and are *fully tested*. In other words we simulate what would -# happen if a user tried to install on a just-compiled virgin perl -# - Without CLEANTEST we bring the armada of RDBMS and install the maximum -# possible set of deps *without testing them*. This ensures we stay within -# a reasonable build-time and still run as many of our tests as possible -# -# * The perl builds and the DBIC tests run under NUMTHREADS number of threads. -# The testing of dependencies under CLEANTEST runs single-threaded, at least -# until we fix our entire dep-chain to safely pass under -j -# -# * The way .travis.yml is fed to the command controller is idiotic - it -# makes using multiline `bash -c` statements impossible. Therefore to -# aid readability (our travis logic is rather complex), the bulk of -# functionality is moved to scripts. More about the problem (and the -# WONTFIX "explanation") here: https://github.com/travis-ci/travis-ci/issues/497 +# attention of the maintainer. *DO NOT* disable 5.8 testing - it is here for +# a very good reason # # the entire run times out after 50 minutes, or after 5 minutes without # console output # # Smoke all branches except for blocked* and wip/* -# -# Additionally master does not smoke with bleadperl -# ( implemented in maint/travis-ci_scripts/10_before_install.bash ) -# branches: except: - /^wip\// @@ -54,49 +31,98 @@ notifications: email: recipients: - - ribasushi@cpan.org - # Temporary - if it proves to be too noisy, we'll shut it off - #- dbix-class-devel@lists.scsys.co.uk + - CPAN-CI@leporine.io on_success: change on_failure: always -# FIXME - This stuff is not yet available for free OSS accounts, sadpanda -# First paragrah on http://about.travis-ci.org/docs/user/caching/ -#cache: -# apt: true -# directories: -# - /var/cache/apt/archives +addons: + apt: + packages: + - libapp-nopaste-perl + - net-tools +# This is probably a net-loss for setup etc - a bare 'C' will likely fare much better language: perl +# Currently not trying osx: https://github.com/travis-ci/travis-ci/issues/2314 +os: linux + +# The defaults run under the more rapid container infra. The hardware is +# actually *much* slower, but the jobs start much faster, for more info see +# https://docs.travis-ci.com/user/ci-environment/#Virtualization-environments +# Combined with 'fast_finish' this will result in an "uh-oh" email as early +# as possible +dist: precise +sudo: false +env: CLEANTEST=true + perl: - "5.8" - - "5.20-extras" - -env: - - CLEANTEST=false - - CLEANTEST=true NUMTHREADS=1 + - "5.10" + - "5.22-extras" matrix: fast_finish: true + include: - # CLEANTEST of minimum supported with non-tracing poisoning - - perl: 5.8.3_nt_mb + + # Same as the "master matrix" above, frozen under older dist/infrastructure + # In genereal it is strongly recommended to keep things on the older + # version indefinitely - there is little value in-depth smoking on + # more recent software stacks + # Add moderate (not complete) poisoning, as these will run on PR-related + # builds, therefore contributors will get notified about *most* issues + - perl: "5.8" + sudo: required + dist: precise env: + - CLEANTEST=false + - POISON_ENV=true + + - perl: "5.10" + sudo: required + dist: precise + env: + - CLEANTEST=false + - POISON_ENV=true + + - perl: "5.22-extras" + sudo: required + dist: precise + env: + - CLEANTEST=false + - POISON_ENV=true + + # CLEANTEST of minimum supported with non-tracing poisoning, single thread (hence the sudo) + - perl: "5.8.3_nt_mb" + sudo: required + dist: precise + env: + - VCPU_USE=1 - CLEANTEST=true + - POISON_ENV=true - DBIC_TRACE_PROFILE=console_monochrome - BREWVER=5.8.3 - BREWOPTS="-Dusemorebits" - # Full Test of minimum supported without threads with non-tracing poisoning - - perl: 5.8.3_nt + # Full Test of minimum supported without threads with plain poisoned trace + - perl: "5.8.3_nt" + sudo: required + dist: precise + # run these under legacy - great simulation of low memory env + group: legacy env: - CLEANTEST=false - POISON_ENV=true + - DBIC_TRACE=1 - BREWVER=5.8.3 # Full Test of minimum supported with threads with non-tracing poisoning - - perl: 5.8.5_thr + - perl: "5.8.5_thr" + sudo: required + dist: precise + # run these under legacy - great simulation of low memory env + group: legacy env: - CLEANTEST=false - POISON_ENV=true @@ -105,30 +131,42 @@ matrix: - BREWOPTS="-Duseithreads" # CLEANTEST of solaris-like perl with non-tracing poisoning - - perl: 5.8.4_nt + - perl: "5.8.4_nt" + sudo: false + dist: precise env: - CLEANTEST=true - POISON_ENV=true - DBIC_TRACE_PROFILE=console - BREWVER=5.8.4 - # CLEANTEST: this particular perl is quite widespread - - perl: 5.8.8_thr_mb + # Full test: this particular perl is quite widespread, single thread + - perl: "5.8.8_thr" + sudo: required + dist: precise + group: legacy env: - - CLEANTEST=true + - VCPU_USE=1 + - CLEANTEST=false - BREWVER=5.8.8 - - BREWOPTS="-Duseithreads -Dusemorebits" + - BREWOPTS="-Duseithreads" - # CLEANTEST: this is the perl suse ships - - perl: 5.10.0_thr_dbg + # CLEANTEST: this is the perl suse ships, with env poisoning + - perl: "5.10.0_thr_dbg" + sudo: false + dist: precise env: - CLEANTEST=true + - POISON_ENV=true - BREWVER=5.10.0 - BREWOPTS="-DDEBUGGING -Duseithreads" - # CLEANTEST: this one is in a number of debian-based LTS (test a sane CPAN.pm) - - perl: 5.14.2_thr_mb + # CLEANTEST: this one is in a number of debian-based LTS (test a sane CPAN.pm, single thread) + - perl: "5.14.2_thr_mb" + sudo: required + dist: precise env: + - VCPU_USE=1 - CLEANTEST=true - BREWVER=5.14.2 - BREWOPTS="-Duseithreads -Dusemorebits" @@ -136,56 +174,145 @@ matrix: ### # some permutations of tracing and envvar poisoning - - perl: 5.12.3_thr + - perl: "5.12.3_thr" + sudo: false + dist: precise env: - CLEANTEST=true + - POISON_ENV=true - DBIC_TRACE=1 - DBIC_MULTICREATE_DEBUG=1 - DBIC_STORAGE_RETRY_DEBUG=1 - - POISON_ENV=true - DBIC_TRACE_PROFILE=console - BREWVER=5.12.3 - BREWOPTS="-Duseithreads" - - perl: 5.16.3_thr_mb + - perl: "5.16.3_thr_mb" + sudo: required + dist: precise env: - CLEANTEST=false - DBIC_TRACE=1 - - POISON_ENV=true + - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1 - BREWVER=5.16.3 - BREWOPTS="-Duseithreads -Dusemorebits" - - perl: 5.18-extras + - perl: "5.18-extras" + sudo: required + # explicit new infra spec preparing for a future forced upgrade + dist: trusty env: - CLEANTEST=false - - DBIC_TRACE=1 - POISON_ENV=true + - DBIC_TRACE=1 - DBIC_TRACE_PROFILE=console_monochrome - DBICTEST_VIA_REPLICATED=0 + - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1 + + # MAKE SURE TO KEEP THE FLAGS IDENTICAL TO CPERL BELOW + # allows for easier side-by-side comparison + # vcpu=1 for even more stable results + - perl: "5.24.0_thr_qm" + # explicit new infra spec preparing for a future forced upgrade + # also need to pull in a sufficiently new compiler for quadmath.h + sudo: required + dist: trusty + env: + - VCPU_USE=1 + - CLEANTEST=true + - POISON_ENV=true + - MVDT=false + - BREWVER=5.24.0 + - BREWOPTS="-Duseithreads -Dusequadmath" ### # Start of the allow_failures block - # threaded oldest possible with blead CPAN with non-tracing poisoning - - perl: devcpan_5.8.1_thr_mb + # MAKE SURE TO KEEP THE FLAGS IDENTICAL TO STOCK 5.latest.comparable ABOVE + # allows for easier side-by-side comparison + # vcpu=1 for even more stable results + - perl: "cperl-5.24.0_thr_qm" + # explicit new infra spec preparing for a future forced upgrade + # also need to pull in a sufficiently new compiler for quadmath.h + sudo: required + dist: trusty env: + - VCPU_USE=1 - CLEANTEST=true - - DEVREL_DEPS=true - POISON_ENV=true + - MVDT=false + - BREWVER=cperl-5.24.0 + - BREWOPTS="-Duseithreads -Dusequadmath" + + - perl: "cperl-master_thr" + sudo: false + dist: precise + env: + - CLEANTEST=true + - POISON_ENV=true + - MVDT=false + - BREWVER=cperl-master + - BREWOPTS="-Duseithreads -Dusedevel" + + # threaded oldest possible with blead CPAN + - perl: "devcpan_5.8.1_thr_mb" + sudo: false + dist: precise + env: + - CLEANTEST=true + - DEVREL_DEPS=true - BREWVER=5.8.1 - BREWOPTS="-Duseithreads -Dusemorebits" - # 5.8.4 threaded with blead CPAN with non-tracing poisoning - - perl: devcpan_5.8.4_thr + # oldest possible with blead CPAN with poisoning and plain trace + - perl: "devcpan_5.8.1" + sudo: false + dist: precise env: - CLEANTEST=true - DEVREL_DEPS=true - POISON_ENV=true - - BREWVER=5.8.4 + - DBIC_TRACE=1 + - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1 + - BREWVER=5.8.1 + + # 5.8.3 with blead CPAN + - perl: "devcpan_5.8.3_mb" + sudo: required + # explicit new infra spec preparing for a future forced upgrade + dist: trusty + env: + - CLEANTEST=false + - DEVREL_DEPS=true + - BREWVER=5.8.3 + - BREWOPTS="-Dusemorebits" + + # 5.8.7 threaded with blead CPAN with non-tracing poisoning + - perl: "devcpan_5.8.7_thr" + sudo: false + dist: precise + env: + - CLEANTEST=true + - DEVREL_DEPS=true + - POISON_ENV=true + - BREWVER=5.8.7 - BREWOPTS="-Duseithreads" + # 5.8.8 threaded MB (exercises P5#72210) + - perl: "devcpan_5.8.8_thr_mb" + sudo: false + dist: precise + env: + - CLEANTEST=true + - DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1 + - DEVREL_DEPS=true + - BREWVER=5.8.8 + - BREWOPTS="-Duseithreads -Dusemorebits" + # 5.10.0 threaded with blead CPAN - - perl: devcpan_5.10.0_thr_mb + - perl: "devcpan_5.10.0_thr_mb" + sudo: false + dist: precise env: - CLEANTEST=true - DEVREL_DEPS=true @@ -193,40 +320,62 @@ matrix: - BREWOPTS="-Duseithreads -Dusemorebits" # 5.12.1 with blead CPAN - - perl: devcpan_5.12.1_thr + - perl: "devcpan_5.12.1_thr" + sudo: false + dist: precise env: - CLEANTEST=true - DEVREL_DEPS=true - BREWVER=5.12.1 - BREWOPTS="-Duseithreads" - # bleadperl with stock CPAN, full depchain test with non-tracing poisoning - - perl: bleadperl + # bleadperl with stock CPAN, full depchain test with non-tracing poisoning, single thread + - perl: "bleadperl" + sudo: required + dist: precise env: + - VCPU_USE=1 - CLEANTEST=true - POISON_ENV=true - BREWVER=blead - # bleadperl with blead CPAN with non-tracing poisoning - - perl: devcpan_bleadperl_thr_mb + # bleadperl with blead CPAN, single thread + - perl: "devcpan_bleadperl_thr_mb" + sudo: required + # explicitly do not specify dist - see what the default does env: + - VCPU_USE=1 - CLEANTEST=false - DEVREL_DEPS=true - - POISON_ENV=true - BREWVER=blead - BREWOPTS="-Duseithreads -Dusemorebits" + # CLEANTEST of http://schplog.schmorp.de/2015-06-06-a-stable-perl.html with non-tracing poisoning + - perl: "schmorp_stableperl_thr_mb" + sudo: false + dist: precise + env: + - CLEANTEST=true + - POISON_ENV=true + - BREWVER=schmorp_stableperl + - BREWOPTS="-Duseithreads -Dusemorebits" # which ones of the above can fail allow_failures: # these run with various dev snapshots - allowed to fail + - perl: cperl-5.24.0_thr_qm + - perl: cperl-master_thr - perl: devcpan_5.8.1_thr_mb - - perl: devcpan_5.8.4_thr + - perl: devcpan_5.8.1 + - perl: devcpan_5.8.3_mb + - perl: devcpan_5.8.7_thr + - perl: devcpan_5.8.8_thr_mb - perl: devcpan_5.10.0_thr_mb - perl: devcpan_5.12.1_thr - perl: bleadperl - perl: devcpan_bleadperl_thr_mb + - perl: schmorp_stableperl_thr_mb ### @@ -268,24 +417,29 @@ before_script: # need to invoke the after_failure script manually # because 'after_failure' runs only after 'script' fails # - - maint/getstatus maint/travis-ci_scripts/30_before_script.bash || ( maint/travis-ci_scripts/50_after_failure.bash && /bin/false ) + - maint/getstatus /bin/bash maint/travis-ci_scripts/30_before_script.bash script: # Run actual tests # - - maint/getstatus maint/travis-ci_scripts/40_script.bash + - maint/getstatus /bin/bash maint/travis-ci_scripts/40_script.bash + +### +### Set -e back, work around https://github.com/travis-ci/travis-ci/issues/3533 +### + - set -e after_success: # Check if we can assemble a dist properly if not in CLEANTEST # - - maint/getstatus maint/travis-ci_scripts/50_after_success.bash + - maint/getstatus /bin/bash maint/travis-ci_scripts/50_after_success.bash || ( /bin/bash maint/travis-ci_scripts/50_after_failure.bash && /bin/false ) after_failure: # Final sysinfo printout on fail # - - maint/getstatus maint/travis-ci_scripts/50_after_failure.bash + - maint/getstatus /bin/bash maint/travis-ci_scripts/50_after_failure.bash after_script: # No tasks yet # - #- maint/getstatus maint/travis-ci_scripts/60_after_script.bash + #- maint/getstatus /bin/bash maint/travis-ci_scripts/60_after_script.bash