#
# Makefile to build perl on Windows NT using DMAKE.
# Supported compilers:
-# Visual C++ 2.0 thro 6.0
-# Borland C++ 5.02
-# Mingw32 with gcc-2.95.2 or better **experimental**
+# Visual C++ 2.0 through 7.0 (and possibly newer versions)
+# Borland C++ 5.02 or better
+# MinGW with gcc-2.95.2 or better
+# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl57.dll). Also makes individual DLLs for the XS extensions.
+# (perl59.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-INST_VER *= \5.7.0
+#INST_VER *= \5.9.5
#
# Comment this out if you DON'T want your perl installation to have
# the same location. Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
-INST_ARCH *= \$(ARCHNAME)
+#INST_ARCH *= \$(ARCHNAME)
+
+#
+# Uncomment this if you want perl to run
+# $Config{sitelibexp}\sitecustomize.pl
+# before anything else. This script can then be set up, for example,
+# to add additional entries to @INC.
+#
+#USE_SITECUST *= define
#
# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
+# emulation and for thread support.
#
USE_MULTI *= define
#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation. This needs
-# USE_MULTI as well.
+# Interpreter cloning/threads; now reasonably complete.
+# This should be enabled to get the fork() emulation.
+# This needs USE_MULTI above.
#
USE_ITHREADS *= define
#
# uncomment to enable the implicit "host" layer for all system calls
-# made by perl. This needs USE_MULTI above. This is also needed to
-# get fork().
+# made by perl. This needs USE_MULTI above.
+# This is also needed to get fork().
#
USE_IMP_SYS *= define
#
-# uncomment to enable the experimental PerlIO I/O subsystem.
-USE_PERLIO = define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities. This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS *= define
+# Comment out next assign to disable perl's I/O subsystem and use compiler's
+# stdio for IO - depending on your compiler vendor and run time library you may
+# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
+# You will also be unable to take full advantage of perl5.8's support for multiple
+# encodings and may see lower IO performance. You have been warned.
+USE_PERLIO *= define
#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005. This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT *= define
+# Comment this out if you don't want to enable large file support for
+# some reason. Should normally only be changed to maintain compatibility
+# with an older release of perl.
+USE_LARGE_FILES *= define
#
# uncomment exactly one of the following
#CCTYPE *= MSVC20
# Visual C++ > 2.x and < 6.x
#CCTYPE *= MSVC
-# Visual C++ >= 6.x
-CCTYPE *= MSVC60
+# Visual C++ 6.x (aka Visual C++ 98)
+#CCTYPE *= MSVC60
+# Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
+#CCTYPE *= MSVC70FREE
+# Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
+#CCTYPE *= MSVC70
+# Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
+#CCTYPE *= MSVC80FREE
+# Visual C++ 2005 (aka Visual C++ 8.x) (full version)
+#CCTYPE *= MSVC80
# Borland 5.02 or later
#CCTYPE *= BORLAND
-# mingw32+gcc-2.95.2 or better
-#CCTYPE *= GCC
+# MinGW with gcc-2.95.2 or later
+CCTYPE *= GCC
#
# uncomment this if your Borland compiler is older than v5.4.
-BCCVER = 5.2
+#BCCOLD *= define
#
# uncomment this if you want to use Borland's VCL as your CRT
-#BCCVCL = define
+#BCCVCL *= define
#
# uncomment this if you are compiling under Windows 95/98 and command.com
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#
-CFG *= Debug
+#CFG *= Debug
#
# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
# It has patches that fix known bugs in older versions of MSVCRT.DLL.
# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
+# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
# and follow the directions in the package to install.
#
# Not recommended if you have VC 6.x and you're not running Windows 9x.
#USE_SETARGV *= define
#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located in the same
-# directory as this file.
+# if you want to have the crypt() builtin function implemented, leave this or
+# CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
+# version of des_fcrypt().
#
-#CRYPT_SRC *= fcrypt.c
+CRYPT_SRC *= fcrypt.c
#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
#PERL_MALLOC *= define
#
+# set this to enable debugging mstats
+# This must be enabled to use the Devel::Peek::mstat() function. This cannot
+# be enabled without PERL_MALLOC as well.
+#
+#DEBUG_MSTATS *= define
+
+#
+# set this to additionally provide a statically linked perl-static.exe.
+# Note that dynamic loading will not work with this perl, so you must
+# include required modules statically using STATIC_EXT variable below.
+# A static library perl59s.lib will also be created.
+# Ordinary perl.exe is not affected by this option.
+#
+#BUILD_STATIC *= define
+
+#
# set the install locations of the compiler include/libraries
# Running VCVARS32.BAT is *required* when using Visual C.
# Some versions of Visual C don't define MSVCDIR in the environment,
# so you may have to set CCHOME explicitly (spaces in the path name should
# not be quoted)
#
-#CCHOME *= F:\borland\bc5
+.IF "$(CCTYPE)" == "BORLAND"
+CCHOME *= C:\Borland\BCC55
+.ELIF "$(CCTYPE)" == "GCC"
+CCHOME *= C:\MinGW
+.ELSE
CCHOME *= $(MSVCDIR)
-#CCHOME *= c:\gcc-2.95.2
+.ENDIF
CCINCDIR *= $(CCHOME)\include
CCLIBDIR *= $(CCHOME)\lib
#
# Additional compiler flags can be specified here.
#
+BUILDOPT *= $(BUILDOPTEXTRA)
+
+#
+# Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
+# internal hash function unless the PERL_HASH_SEED environment variable is set.
+# Alternatively, adding -DNO_HASH_SEED will completely disable the
+# randomization feature.
+# The latter is required to maintain binary compatibility with Perl 5.8.0.
+#
+#BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
+#BUILDOPT += -DNO_HASH_SEED
#
# This should normally be disabled. Adding -DPERL_POLLUTE enables support
#
# This should normally be disabled. Enabling it causes perl to read scripts
# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#
#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
#
CRYPT_FLAG = -DHAVE_DES_FCRYPT
.ENDIF
-.IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC != undef
-USE_5005THREADS != undef
-USE_MULTI != undef
-USE_IMP_SYS != define
-.ENDIF
-
PERL_MALLOC *= undef
+DEBUG_MSTATS *= undef
-USE_5005THREADS *= undef
-
-.IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS != undef
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC != undef
-.ENDIF
-
+USE_SITECUST *= undef
USE_MULTI *= undef
-USE_OBJECT *= undef
USE_ITHREADS *= undef
USE_IMP_SYS *= undef
USE_PERLIO *= undef
+USE_LARGE_FILES *= undef
USE_PERLCRT *= undef
-.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
+.IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC = undef
+.ENDIF
+
+.IF "$(PERL_MALLOC)" == "undef"
+DEBUG_MSTATS = undef
+.ENDIF
+
+.IF "$(DEBUG_MSTATS)" == "define"
+BUILDOPT += -DPERL_DEBUGGING_MSTATS
+.ENDIF
+
+.IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
USE_MULTI != define
.ENDIF
-.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
+.IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
USE_MULTI != define
-USE_5005THREADS != undef
.ENDIF
-.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
+.IF "$(USE_SITECUST)" == "define"
+BUILDOPT += -DUSE_SITECUSTOMIZE
+.ENDIF
+
+.IF "$(USE_MULTI)" != "undef"
BUILDOPT += -DPERL_IMPLICIT_CONTEXT
.ENDIF
BUILDOPT += -DPERL_IMPLICIT_SYS
.ENDIF
-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
PROCESSOR_ARCHITECTURE *= x86
-.IF "$(USE_OBJECT)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-.ELIF "$(USE_5005THREADS)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-.ELIF "$(USE_MULTI)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
+.IF "$(WIN64)" == ""
+# When we are running from a 32bit cmd.exe on AMD64 then
+# PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
+# is set to AMD64
+.IF "$(PROCESSOR_ARCHITEW6432)" != ""
+PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
+WIN64 = define
+.ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
+WIN64 = define
+.ELSE
+WIN64 = undef
+.ENDIF
+.ENDIF
+
+ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
+.IF "$(ARCHITECTURE)" == "AMD64"
+ARCHITECTURE = x64
+.ENDIF
+.IF "$(ARCHITECTURE)" == "IA64"
+ARCHITECTURE = ia64
+.ENDIF
+
+.IF "$(USE_MULTI)" == "define"
+ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
.ELSE
.IF "$(USE_PERLIO)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
+ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
.ELSE
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
+ARCHNAME = MSWin32-$(ARCHITECTURE)
.ENDIF
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
.ENDIF
.IF "$(USE_ITHREADS)" == "define"
ARCHNAME !:= $(ARCHNAME)-thread
.ENDIF
-# Visual Studio 98 specific
-.IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
-DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-
-.IF "$(CFG)" == "Debug"
-.ELSE
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-CFG *= Optimize
+# Visual C++ 98, .NET 2003 and 2005 specific.
+# VC++ 6.x, 7.x and 8.x can load DLL's on demand. Makes the test suite run in
+# about 10% less time. (The free version of 7.x can't do this, but the free
+# version of 8.x can.)
+.IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" \
+ "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
+DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
.ENDIF
+
+# Visual C++ 2005 (VC++ 8.x) creates manifest files for EXEs and DLLs. These
+# either need copying everywhere with the binaries, or else need embedding in
+# them otherwise MSVCR80.dll won't be found. Embed them for simplicity, and
+# delete them afterwards so that they don't get installed too.
+.IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
+EMBED_EXE_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
+ del $@.manifest
+EMBED_DLL_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
+ del $@.manifest
.ENDIF
ARCHDIR = ..\lib\$(ARCHNAME)
EXTDIR = ..\ext
PODDIR = ..\pod
EXTUTILSDIR = $(LIBDIR)\ExtUtils
+HTMLDIR = .\html
#
INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
INST_LIB = $(INST_TOP)$(INST_VER)\lib
INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
INST_HTML = $(INST_TOP)$(INST_VER)\html
#
.IF "$(CCTYPE)" == "BORLAND"
CC = bcc32
-.IF $(BCCVER) != 5.2
+.IF "$(BCCOLD)" != "define"
LINK32 = ilink32
.ELSE
LINK32 = tlink32
.ENDIF
-LIB32 = tlib /P128
+LIB32 = tlib /a /P128
IMPLIB = implib -c
-RSC = rc
+RSC = brcc32
#
# Options
#
INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
-DEFINES = -DWIN32 -D_MT $(CRYPT_FLAG)
+DEFINES = -DWIN32 $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -P
LIBC = cw32mti.lib
-LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
+
+# same libs as MSVC, except Borland doesn't have oldnames.lib
+LIBFILES = $(CRYPT_LIB) \
+ kernel32.lib user32.lib gdi32.lib winspool.lib \
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
+ version.lib odbc32.lib odbccp32.lib \
+ import32.lib $(LIBC)
.IF "$(CFG)" == "Debug"
OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
LINK_DBG =
.ENDIF
+EXTRACFLAGS =
CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
+ -L"$(CCLIBDIR)\PSDK"
OBJOUT_FLAG = -o
EXEOUT_FLAG = -e
LIBOUT_FLAG =
-.IF $(BCCVER) != 5.2
-LINK_FLAGS += -Gn
+.IF "$(BCCOLD)" != "define"
+LINK_FLAGS += -Gn
+DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
.END
.IF "$(BCCVCL)" == "define"
LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
.ELIF "$(CCTYPE)" == "GCC"
CC = gcc
-LINK32 = gcc
+LINK32 = g++
LIB32 = ar rc
IMPLIB = dlltool
-RSC = rc
+RSC = windres
i = .i
o = .o
LIBFILES = $(CRYPT_LIB) $(LIBC) \
-lmoldname -lkernel32 -luser32 -lgdi32 \
-lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
- -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
- -lwinmm -lversion -lodbc32
+ -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
+ -lwinmm -lversion -lodbc32 -lodbccp32
.IF "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 -DDEBUGGING
LINK_DBG = -g
.ELSE
-OPTIMIZE = -g -O2
-LINK_DBG = -g
+OPTIMIZE = -s -O2
+LINK_DBG = -s
.ENDIF
+EXTRACFLAGS =
CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
OBJOUT_FLAG = -o
LIBOUT_FLAG =
# NOTE: we assume that GCC uses MSVCRT.DLL
+# See comments about PERL_MSVCRT_READFIX in the "cl" compiler section below.
BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
.ELSE
LIBC = PerlCRT.lib
.ENDIF
-PERLEXE_RES =
-PERLDLL_RES =
-
.IF "$(CFG)" == "Debug"
.IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
-LINK_DBG = -debug -pdb:none
.ELSE
-# -Zi requires .pdb file(s)
-#OPTIMIZE = -Od -MD -Zi -DDEBUGGING
-#LINK_DBG = -debug
-OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING
-LINK_DBG = -debug -debugtype:both -pdb:none
+OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
.ENDIF
+LINK_DBG = -debug
.ELSE
-.IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
+OPTIMIZE = -MD -Zi -DNDEBUG
+# we enable debug symbols in release builds also
+LINK_DBG = -debug -opt:ref,icf
+# you may want to enable this if you want COFF symbols in the executables
+# in addition to the PDB symbols. The default Dr. Watson that ships with
+# Windows can use the the former but not latter. The free WinDbg can be
+# installed to get better stack traces from just the PDB symbols, so we
+# avoid the bloat of COFF symbols by default.
+#LINK_DBG = $(LINK_DBG) -debugtype:both
+.IF "$(WIN64)" == "define"
+# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
+OPTIMIZE += -Ox -GL
+LINK_DBG += -ltcg
.ELSE
-OPTIMIZE = -Od -MD -DNDEBUG
+# -O1 yields smaller code, which turns out to be faster than -O2 on x86
+OPTIMIZE += -O1
+#OPTIMIZE += -O2
+.ENDIF
+.ENDIF
+
+.IF "$(WIN64)" == "define"
+DEFINES += -DWIN64 -DCONSERVATIVE
+OPTIMIZE += -Wp64 -fp:precise
+.ENDIF
+
+# Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
+# VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
+# do not require the fix.
+.IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
+.IF "$(USE_PERLCRT)" != "define"
+BUILDOPT += -DPERL_MSVCRT_READFIX
.ENDIF
-LINK_DBG = -release
.ENDIF
LIBBASEFILES = $(CRYPT_LIB) \
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
version.lib odbc32.lib odbccp32.lib
+# The 64 bit Platform SDK compilers contain a runtime library that doesn't
+# include the buffer overrun verification code used by the /GS switch.
+# Since the code links against libraries that are compiled with /GS, this
+# "security cookie verification" must be included via bufferoverlow.lib.
+.IF "$(WIN64)" == "define"
+LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
+.ENDIF
+
# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+EXTRACFLAGS = -nologo -GF -W3
+CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
-libpath:"$(INST_COREDIR)" \
-machine:$(PROCESSOR_ARCHITECTURE)
+LIB_FLAGS = -nologo
OBJOUT_FLAG = -Fo
EXEOUT_FLAG = -Fe
LIBOUT_FLAG = /out:
-.IF "$(USE_PERLCRT)" != "define"
-BUILDOPT += -DPERL_MSVCRT_READFIX
-.ENDIF
-
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-OPTIMIZE += $(CXX_FLAG)
-BUILDOPT += -DPERL_OBJECT
.ENDIF
CFLAGS_O = $(CFLAGS) $(BUILDOPT)
#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+# Some dmake's built with Borland C++, including Sarathy's one at:
+# http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
+# require backslashes to be doubled-up when written to $(mktmp) files.
+# Other dmake's do not require this and would actually output a double
+# backslash if they were doubled-up.
+.IF "$(shell @type $(mktmp \\))"=="\\"
+B=\\
+.ELSE
+B=\\\
+.ENDIF
+
+# There is a related issue with other escape sequences: Sarathy's old
+# dmake automatically maps escape sequences like \n to their ASCII values
+# when used in macros, while other dmake's only do so if this behaviour
+# is explicitly requested with the :m modifier.
+DONTUSETHIS=\n
+.IF "$(shell @type $(mktmp \n))"=="\n"
+N=$(DONTUSETHIS:m)
+.ELSE
+N=$(DONTUSETHIS)
+.ENDIF
+
o *= .obj
a *= .lib
.ELSE
$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
-out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+ $(EMBED_DLL_MANI)
.ENDIF
.rc.res:
+.IF "$(CCTYPE)" == "GCC"
+ $(RSC) --use-temp-file -i $< -o $@
+.ELSE
$(RSC) -i.. $<
+.ENDIF
#
# various targets
MINIDIR = .\mini
PERLEXE = ..\perl.exe
WPERLEXE = ..\wperl.exe
+PERLEXESTATIC = ..\perl-static.exe
GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
+CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
+.IF "$(BUILD_STATIC)" == "define"
+PERLSTATIC = static
+.ELSE
+PERLSTATIC =
+.ENDIF
+
+# Unicode data files generated by mktables
+UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
+ ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
+ ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
+ ..\lib\unicore\PVA.pl
+
+# Directories of Unicode data files generated by mktables
+UNIDATADIR1 = ..\lib\unicore\To
+UNIDATADIR2 = ..\lib\unicore\lib
+
+PERLEXE_ICO = .\perlexe.ico
+PERLEXE_RES = .\perlexe.res
+PERLDLL_RES =
# Nominate a target which causes extensions to be re-built
# This used to be $(PERLEXE), but at worst it is the .dll that they depend
..\utils\perlbug \
..\utils\pl2pm \
..\utils\c2ph \
+ ..\utils\pstruct \
..\utils\h2xs \
..\utils\perldoc \
- ..\utils\perlcc \
+ ..\utils\perlivp \
+ ..\utils\libnetcfg \
+ ..\utils\enc2xs \
+ ..\utils\piconv \
+ ..\utils\config_data \
+ ..\utils\corelist \
+ ..\utils\cpan \
+ ..\utils\xsubpp \
+ ..\utils\prove \
+ ..\utils\ptar \
+ ..\utils\ptardiff \
+ ..\utils\shasum \
+ ..\utils\instmodsh \
..\pod\checkpods \
..\pod\pod2html \
..\pod\pod2latex \
..\pod\podchecker \
..\pod\podselect \
..\x2p\find2perl \
+ ..\x2p\psed \
..\x2p\s2p \
bin\exetype.pl \
bin\runperl.pl \
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
-PERLIMPLIB = ..\libperl57$(a)
+PERLIMPLIB = ..\libperl59$(a)
+PERLSTATICLIB = ..\libperl59s$(a)
.ELSE
+.IF "$(WIN64)" == "define"
+CFGSH_TMPL = config.vc64
+CFGH_TMPL = config_H.vc64
+.ELSE
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
+.ENDIF
.ENDIF
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-# XXX so why did we change it from perl56 to perl57?
-PERLIMPLIB *= ..\perl57$(a)
-PERLDLL = ..\perl57.dll
+PERLIMPLIB *= ..\perl59$(a)
+PERLSTATICLIB *= ..\perl59s$(a)
+PERLDLL = ..\perl59.dll
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
+XCOPY = xcopy /f /r /i /d /y
+RCOPY = xcopy /f /r /i /e /d /y
+NOOP = @rem
#
# filenames given to xsubpp must have forward slashes (since it puts
..\globals.c \
..\gv.c \
..\hv.c \
+ ..\locale.c \
+ ..\mathoms.c \
..\mg.c \
+ ..\numeric.c \
..\op.c \
+ ..\pad.c \
..\perl.c \
..\perlapi.c \
..\perly.c \
..\pp.c \
..\pp_ctl.c \
..\pp_hot.c \
+ ..\pp_pack.c \
+ ..\pp_sort.c \
..\pp_sys.c \
+ ..\reentr.c \
..\regcomp.c \
..\regexec.c \
..\run.c \
EXTRACORE_SRC += ..\malloc.c
.ENDIF
-.IF "$(USE_OBJECT)" != "define"
EXTRACORE_SRC += ..\perlio.c
-.ENDIF
WIN32_SRC = \
.\win32.c \
.\win32sck.c \
.\win32thread.c
+# We need this for miniperl build unless we override canned
+# config.h #define building mini\*
+#.IF "$(USE_PERLIO)" == "define"
+WIN32_SRC += .\win32io.c
+#.ENDIF
+
.IF "$(CRYPT_SRC)" != ""
WIN32_SRC += .\$(CRYPT_SRC)
.ENDIF
..\perly.h \
..\pp.h \
..\proto.h \
+ ..\regcomp.h \
..\regexp.h \
..\scope.h \
..\sv.h \
MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ = $(DLL_SRC:db:+$(o))
X2P_OBJ = $(X2P_SRC:db:+$(o))
PERLDLL_OBJ = $(CORE_OBJ)
PERLEXE_OBJ = perlmain$(o)
+PERLEXEST_OBJ = perlmainst$(o)
PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
Sys/Hostname Storable Filter/Util/Call Encode \
- Digest/MD5 PerlIO/Scalar MIME/Base64
-STATIC_EXT = DynaLoader
+ Digest/MD5 Digest/SHA PerlIO/scalar MIME/Base64 Time/HiRes \
+ Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32 \
+ Win32API/File
+STATIC_EXT =
NONXS_EXT = Errno
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
# vars must be separated by "\t+~\t+", since we're using the tempfile
# version of config_sh.pl (we were overflowing someone's buffer by
# -- BKS 10-17-1999
CFG_VARS = \
INST_DRV=$(INST_DRV) ~ \
- INST_TOP=$(INST_TOP:s/\/\\/) ~ \
- INST_VER=$(INST_VER:s/\/\\/) ~ \
+ INST_TOP=$(INST_TOP:s,\,$B,) ~ \
+ INST_VER=$(INST_VER:s,\,$B,) ~ \
INST_ARCH=$(INST_ARCH) ~ \
archname=$(ARCHNAME) ~ \
cc=$(CC) ~ \
ld=$(LINK32) ~ \
- ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
+ ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
cf_email=$(EMAIL) ~ \
d_crypt=$(D_CRYPT) ~ \
d_mymalloc=$(PERL_MALLOC) ~ \
libs=$(LIBFILES:f) ~ \
- incpath=$(CCINCDIR:s/\/\\/) ~ \
+ incpath=$(CCINCDIR:s,\,$B,) ~ \
libperl=$(PERLIMPLIB:f) ~ \
- libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
+ libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
libc=$(LIBC) ~ \
make=dmake ~ \
- _o=$(o) obj_ext=$(o) ~ \
- _a=$(a) lib_ext=$(a) ~ \
+ _o=$(o) ~ \
+ obj_ext=$(o) ~ \
+ _a=$(a) ~ \
+ lib_ext=$(a) ~ \
static_ext=$(STATIC_EXT) ~ \
- dynamic_ext=$(DYNAMIC_EXT) ~ \
- nonxs_ext=$(NONXS_EXT) ~ \
- use5005threads=$(USE_5005THREADS) ~ \
+ usethreads=$(USE_ITHREADS) ~ \
useithreads=$(USE_ITHREADS) ~ \
- usethreads=$(USE_5005THREADS) ~ \
usemultiplicity=$(USE_MULTI) ~ \
useperlio=$(USE_PERLIO) ~ \
- LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
+ uselargefiles=$(USE_LARGE_FILES) ~ \
+ usesitecustomize=$(USE_SITECUST) ~ \
+ LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
optimize=$(OPTIMIZE)
#
.IF "$(IS_WIN95)" == "define"
MK2 = .\makefile.95
RIGHTMAKE = __switch_makefiles
-NOOP = @rem
.ELSE
MK2 = __not_needed
RIGHTMAKE =
.ENDIF
+.IMPORT .IGNORE : SystemRoot windir
+
+# Don't just .IMPORT OS from the environment because dmake sets OS itself.
+ENV_OS=$(subst,OS=, $(shell @set OS))
+
+.IF "$(ENV_OS)" == "Windows_NT"
+ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
+.ELSE
+ODBCCP32_DLL = $(windir)\system\odbccp32.dll
+.ENDIF
+
#
# Top targets
#
all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
- $(X2P) Extensions
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
+ $(X2P) MakePPPort Extensions $(PERLSTATIC)
+
+..\regnodes.h : ..\regcomp.sym
+ cd .. && regcomp.pl && cd win32
+
+regnodes : ..\regnodes.h
+
+reonly : regnodes .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
+ $(X2P) Extensions_reonly
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+static: $(PERLEXESTATIC)
+
#----------------------------------------------------------------
#-------------------- BEGIN Win95 SPECIFIC ----------------------
.ELSE
$(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
perlglob$(o) setargv$(o)
+ $(EMBED_EXE_MANI)
.ENDIF
perlglob$(o) : perlglob.c
-del /f config.h
copy $(CFGH_TMPL) config.h
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
$(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
$(CFGSH_TMPL) > ..\config.sh
-cd .. && del /f perl.exe
+ -cd .. && del /f perl*.dll
cd .. && perl configpm
-del /f $(CFGH_TMPL)
-mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ -perl config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
.IF "$(CCTYPE)" == "BORLAND"
+ if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
+ cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+ @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
.ELSE
$(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
+ $(EMBED_EXE_MANI)
.ENDIF
$(MINIDIR) :
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
-.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
+.IF "$(USE_IMP_SYS)" == "define"
$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
.ELSE
$(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
$(MINI_OBJ) : $(CORE_NOCFG_H)
$(WIN32_OBJ) : $(CORE_H)
+
$(CORE_OBJ) : $(CORE_H)
+
+$(DLL_OBJ) : $(CORE_H)
+
$(X2P_OBJ) : $(CORE_H)
perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+ $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpd -ap $(BLINK_FLAGS) \
- @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
- $@,\n \
- $(LIBFILES)\n \
- perldll.def\n)
+ @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
+ $@,$N \
+ $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
+ perldll.def$N)
$(IMPLIB) $*.lib $@
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
+ $(subst,\,$B $(shell @type Extensions_static)) \
+ $(LIBFILES) $(LKPOST))
dlltool --output-lib $(PERLIMPLIB) \
--dllname $(PERLDLL:b).dll \
--def perldll.def \
--base-file perl.base \
--output-exp perl.exp
$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
- perl.exp $(LKPOST))
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
+ $(subst,\,$B $(shell @type Extensions_static)) \
+ $(LIBFILES) perl.exp $(LKPOST))
.ELSE
$(LINK32) -dll -def:perldll.def -out:$@ \
+ @Extensions_static \
@$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
- $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
+ $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
+ $(EMBED_DLL_MANI)
.ENDIF
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+$(PERLSTATICLIB): Extensions_static
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LIB32) $(LIB_FLAGS) $@ \
+ @$(mktmp $(subst,\,$B $(shell @type Extensions_static)) \
+ $(PERLDLL_OBJ:s,\,$B,))
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LIB32) $(LIB_FLAGS) $@ $(shell @type $(mktmp \
+ $(subst,\,$B $(shell @type Extensions_static)) \
+ $(PERLDLL_OBJ:s,\,$B,)))
+.ELSE
+ $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
+ @$(mktmp $(PERLDLL_OBJ:s,\,$B,))
+.ENDIF
+ $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
+
+$(PERLEXE_ICO): $(MINIPERL) makeico.pl
+ $(MINIPERL) makeico.pl > $@
+
+$(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
+
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
$(MINIPERL) ..\x2p\s2p.PL
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+ @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -v -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
.ELSE
$(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
+ $(EMBED_EXE_MANI)
.ENDIF
perlmain.c : runperl.c
perlmain$(o) : perlmain.c
$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
+perlmainst.c : runperl.c
+ copy runperl.c perlmainst.c
+
+perlmainst$(o) : perlmainst.c
+ $(CC) $(CFLAGS_O) -DPERLDLL $(OBJOUT_FLAG)$@ -c perlmainst.c
+
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
- $(@:s,\,\\),\n \
- $(PERLIMPLIB) $(LIBFILES)\n)
+ @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
+ $(@:s,\,$B,),$N \
+ $(PERLIMPLIB) $(LIBFILES)$N)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
$(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
.ELSE
$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
$(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
+ $(EMBED_EXE_MANI)
.ENDIF
copy $(PERLEXE) $(WPERLEXE)
$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
+ @$(mktmp c0x32$(o) $(PERLEXEST_OBJ:s,\,$B,)$N \
+ $(@:s,\,$B,),$N \
+ $(subst,\,$B $(shell @type Extensions_static)) \
+ $(PERLSTATICLIB) $(LIBFILES)$N)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
+ $(mktmp $(LKPRE) $(subst,\,$B $(shell @type Extensions_static)) \
+ $(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) $(LKPOST))
+.ELSE
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
+ @Extensions_static $(PERLSTATICLIB) \
+ $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
+ $(EMBED_EXE_MANI)
+.ENDIF
+
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
if not exist $(AUTODIR) mkdir $(AUTODIR)
cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-#----------------------------------------------------------------------------------
-Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
+MakePPPort: $(MINIPERL) $(CONFIGPM)
+ $(MINIPERL) -I..\lib ..\mkppport
-#----------------------------------------------------------------------------------
+MakePPPort_clean:
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
+
+#-------------------------------------------------------------------------------
+Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
+
+Extensions_reonly : buildext.pl $(PERLDEP) $(CONFIGPM)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
+
+Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
+ $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
+
+Extensions_clean :
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
+
+Extensions_realclean :
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
+
+#-------------------------------------------------------------------------------
doc: $(PERLEXE)
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
--podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+# Note that this next section is parsed (and regenerated) by pod/buildtoc
+# so please check that script before making structural changes here
utils: $(PERLEXE) $(X2P)
cd ..\utils && $(MAKE) PERL=$(MINIPERL)
- copy ..\README.aix ..\pod\perlaix.pod
- copy ..\README.amiga ..\pod\perlamiga.pod
- copy ..\README.cygwin ..\pod\perlcygwin.pod
- copy ..\README.dos ..\pod\perldos.pod
- copy ..\README.epoc ..\pod\perlepoc.pod
- copy ..\README.hpux ..\pod\perlhpux.pod
- copy ..\README.machten ..\pod\perlmachten.pod
- copy ..\README.os2 ..\pod\perlos2.pod
- copy ..\README.os390 ..\pod\perlos390.pod
- copy ..\README.vmesa ..\pod\perlvmesa.pod
- copy ..\README.bs2000 ..\pod\perlbs2000.pod
- copy ..\README.solaris ..\pod\perlsolaris.pod
- copy ..\vms\perlvms.pod ..\pod\perlvms.pod
- copy ..\README.vos ..\pod\perlvos.pod
- copy ..\README.win32 ..\pod\perlwin32.pod
+ copy ..\vms\perlvms.pod ..\pod\perlvms.pod
+ copy ..\README.aix ..\pod\perlaix.pod
+ copy ..\README.amiga ..\pod\perlamiga.pod
+ copy ..\README.apollo ..\pod\perlapollo.pod
+ copy ..\README.beos ..\pod\perlbeos.pod
+ copy ..\README.bs2000 ..\pod\perlbs2000.pod
+ copy ..\README.ce ..\pod\perlce.pod
+ copy ..\README.cn ..\pod\perlcn.pod
+ copy ..\README.cygwin ..\pod\perlcygwin.pod
+ copy ..\README.dgux ..\pod\perldgux.pod
+ copy ..\README.dos ..\pod\perldos.pod
+ copy ..\README.epoc ..\pod\perlepoc.pod
+ copy ..\README.freebsd ..\pod\perlfreebsd.pod
+ copy ..\README.hpux ..\pod\perlhpux.pod
+ copy ..\README.hurd ..\pod\perlhurd.pod
+ copy ..\README.irix ..\pod\perlirix.pod
+ copy ..\README.jp ..\pod\perljp.pod
+ copy ..\README.ko ..\pod\perlko.pod
+ copy ..\README.linux ..\pod\perllinux.pod
+ copy ..\README.machten ..\pod\perlmachten.pod
+ copy ..\README.macos ..\pod\perlmacos.pod
+ copy ..\README.macosx ..\pod\perlmacosx.pod
+ copy ..\README.mint ..\pod\perlmint.pod
+ copy ..\README.mpeix ..\pod\perlmpeix.pod
+ copy ..\README.netware ..\pod\perlnetware.pod
+ copy ..\README.openbsd ..\pod\perlopenbsd.pod
+ copy ..\README.os2 ..\pod\perlos2.pod
+ copy ..\README.os390 ..\pod\perlos390.pod
+ copy ..\README.os400 ..\pod\perlos400.pod
+ copy ..\README.plan9 ..\pod\perlplan9.pod
+ copy ..\README.qnx ..\pod\perlqnx.pod
+ copy ..\README.riscos ..\pod\perlriscos.pod
+ copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.symbian ..\pod\perlsymbian.pod
+ copy ..\README.tru64 ..\pod\perltru64.pod
+ copy ..\README.tw ..\pod\perltw.pod
+ copy ..\README.uts ..\pod\perluts.pod
+ copy ..\README.vmesa ..\pod\perlvmesa.pod
+ copy ..\README.vms ..\pod\perlvms.pod
+ copy ..\README.vos ..\pod\perlvos.pod
+ copy ..\README.win32 ..\pod\perlwin32.pod
+ copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
cd ..\lib && $(PERLEXE) lib_pm.PL
$(PERLEXE) $(PL2BAT) $(UTILS)
-distclean: clean
+# Note that the pod cleanup in this next section is parsed (and regenerated
+# by pod/buildtoc so please check that script before making changes here
+
+distclean: realclean
-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
+ $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
+ $(PERLEXESTATIC) $(PERLSTATICLIB)
-del /f *.def *.map
+ -del /f $(DYNALOADER).c
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
+ -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
+ -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
+ -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
+ -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm
+ -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
- -del /f $(LIBDIR)\PerlIO\Scalar.pm
+ -del /f $(LIBDIR)\ByteLoader.pm
-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
+ -del /f $(LIBDIR)\Devel\PPPort.pm
-del /f $(LIBDIR)\File\Glob.pm
-del /f $(LIBDIR)\Storable.pm
- -del /f $(LIBDIR)\Filter\Util\Call\Call.pm
-del /f $(LIBDIR)\Digest\MD5.pm
- -del /f $(LIBDIR)\MIME\Base64\Base64.pm
- -del /f $(LIBDIR)\MIME\Base64\QuotedPrint.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
- -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
- -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
- -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
- -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
- -if exist $(LIBDIR)\Digest\MD5 rmdir /s /q $(LIBDIR)\Digest\MD5 || rmdir /s $(LIBDIR)\Digest\MD5
- -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
- -if exist $(LIBDIR)\MIME\Base64 rmdir /s /q $(LIBDIR)\MIME\Base64 || rmdir /s $(LIBDIR)\MIME\Base64
- -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
- -del /f $(PODDIR)\*.html
- -del /f $(PODDIR)\*.bat
- -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
- dprofpp *.bat
- -cd ..\x2p && del /f find2perl s2p *.bat
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
+ -del /f $(LIBDIR)\Digest\SHA.pm
+ -del /f $(LIBDIR)\PerlIO\encoding.pm
+ -del /f $(LIBDIR)\PerlIO\scalar.pm
+ -del /f $(LIBDIR)\PerlIO\via.pm
+ -del /f $(LIBDIR)\Sys\Hostname.pm
+ -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
+ -del /f $(LIBDIR)\threads\shared.pm
+ -del /f $(LIBDIR)\Time\HiRes.pm
+ -del /f $(LIBDIR)\Unicode\Normalize.pm
+ -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
+ -del /f $(LIBDIR)\Win32.pm
+ -del /f $(LIBDIR)\Win32API\File.pm
+ -del /f $(LIBDIR)\Win32API\File\cFile.pc
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
+ -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
+ -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
+ -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
+ -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
+ -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
+ -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
+ -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
+ -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
+ -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
+ -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
+ -cd $(PODDIR) && del /f *.html *.bat checkpods \
+ perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
+ perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
+ perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
+ perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
+ perljp.pod perlko.pod perllinux.pod perlmachten.pod \
+ perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
+ perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
+ perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
+ perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
+ perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
+ perlwin32.pod \
+ pod2html pod2latex pod2man pod2text pod2usage \
+ podchecker podselect
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
+ perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
+ xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
+ -cd ..\x2p && del /f find2perl s2p psed *.bat
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
+ perlmainst.c
-del /f $(CONFIGPM)
-del /f bin\*.bat
- -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
- pm_to_blib
- -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
- -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
+ -del /f perllibst.h
+ -del /f $(PERLEXE_ICO) perl.base
+ -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
+ -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR)
+ -if exist pod2htmd.tmp del pod2htmd.tmp
+ -if exist pod2htmi.tmp del pod2htmi.tmp
+ -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
install : all installbare installhtml
installbare : $(RIGHTMAKE) utils
$(PERLEXE) ..\installperl
if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
+ if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+ if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
+ if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
installhtml : doc
- $(RCOPY) html\*.* $(INST_HTML)\*.*
+ $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM)
copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
- $(XCOPY) $(MINIPERL) ..\t\perl.exe
+$(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
+ cd ..\lib\unicore && \
+ ..\$(MINIPERL) -I.. mktables
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
+ $(XCOPY) $(MINIPERL) ..\t\$(NULL)
+ if exist ..\t\perl.exe del /f ..\t\perl.exe
+ rename ..\t\miniperl.exe perl.exe
.IF "$(CCTYPE)" == "BORLAND"
$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
attrib -r ..\t\*.*
- copy test ..\t
cd ..\t && \
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
+ $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
test-prep : all utils
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
.ENDIF
test : $(RIGHTMAKE) test-prep
- cd ..\t && $(PERLEXE) -I..\lib harness
+ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
-test-notty : test-prep
- set PERL_SKIP_TTY_TEST=1 && \
- cd ..\t && $(PERLEXE) -I.\lib harness
+test-reonly : reonly utils
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+ cd ..\t && \
+ $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b $(EXTRA) && \
+ cd ..\win32
-test-wide : test-prep
- set HARNESS_PERL_SWITCHES=-C && \
- cd ..\t && $(PERLEXE) -I..\lib harness
+regen :
+ cd .. && regen.pl && cd win32
-test-wide-notty : test-prep
+test-notty : test-prep
set PERL_SKIP_TTY_TEST=1 && \
- set HARNESS_PERL_SWITCHES=-C && \
- cd ..\t && $(PERLEXE) -I..\lib harness
+ cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+
+_test : $(RIGHTMAKE)
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
+.ELSE
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+.ENDIF
+ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
-clean :
+_clean :
-@erase miniperlmain$(o)
-@erase $(MINIPERL)
-@erase perlglob$(o)
-@erase perlmain$(o)
+ -@erase perlmainst$(o)
-@erase config.w32
-@erase /f config.h
-@erase $(GLOBEXE)
-@erase $(PERLEXE)
-@erase $(WPERLEXE)
+ -@erase $(PERLEXESTATIC)
+ -@erase $(PERLSTATICLIB)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
- -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
+ -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
+ -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
+ -@erase $(UNIDATAFILES)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
-@erase $(X2P_OBJ)
-@erase ..\x2p\*.exe ..\x2p\*.bat
-@erase *.ilk
-@erase *.pdb
+ -@erase *.tds
+ -@erase Extensions_static
+
+clean : Extensions_clean _clean
+
+realclean : Extensions_realclean MakePPPort_clean _clean
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
projects / p5sagit/p5-mst-13.2.git / blobdiff