-#
-# Makefile to build perl on Windows NT using DMAKE.
-# Supported compilers:
-# Visual C++ 2.0 thro 6.0
-# Borland C++ 5.02
-# Mingw32 with gcc-2.95.2 or better **experimental**
-#
-# This is set up to build a perl.exe that runs off a shared library
-# (perl.dll). Also makes individual DLLs for the XS extensions.
-#
-
-##
-## Make sure you read README.win32 *before* you mess with anything here!
-##
-
-##
-## Build configuration. Edit the values below to suit your needs.
-##
-
-#
-# Set these to wherever you want "dmake install" to put your
-# newly built perl.
-#
-INST_DRV *= c:
-INST_TOP *= $(INST_DRV)\perl
-
-#
-# Comment this out if you DON'T want your perl installation to be versioned.
-# This means that the new installation will overwrite any files from the
-# old installation at the same INST_TOP location. Leaving it enabled is
-# the safest route, as perl adds the extra version directory to all the
-# locations it installs files to. If you disable it, an alternative
-# versioned installation can be obtained by setting INST_TOP above to a
-# path that includes an arbitrary version string.
-#
-INST_VER *= \5.5.640
-
-#
-# Comment this out if you DON'T want your perl installation to have
-# architecture specific components. This means that architecture-
-# specific files will be installed along with the architecture-neutral
-# files. Leaving it enabled is safer and more flexible, in case you
-# want to build multiple flavors of perl and install them together in
-# the same location. Commenting it out gives you a simpler
-# installation that is easier to understand for beginners.
-#
-INST_ARCH *= \$(ARCHNAME)
-
-#
-# XXX WARNING! This option currently undergoing changes. May be broken.
-#
-# uncomment to enable threads-capabilities
-#
-#USE_5005THREADS *= define
-
-#
-# XXX WARNING! This option currently undergoing changes. May be broken.
-#
-# uncomment to enable multiple interpreters
-#
-#USE_MULTI *= define
-
-#
-# XXX WARNING! This option currently undergoing changes. May be broken.
-#
-# uncomment next line if you want to use the perl object
-# Currently, this cannot be enabled if you ask for threads above, or
-# if you are using GCC or EGCS.
-#
-#USE_OBJECT *= define
-
-#
-# XXX WARNING! This option currently undergoing changes. May be broken.
-#
-# Beginnings of interpreter cloning/threads: still rather rough, fails
-# tests. This should be enabled to get the fork() emulation. Do not
-# enable unless you know what you're doing!
-#
-#USE_ITHREADS *= define
-
-#
-# uncomment to enable the implicit "host" layer for all system calls
-# made by perl. This is needed and auto-enabled by USE_OBJECT above.
-# This is also needed to get fork().
-#
-#USE_IMP_SYS *= define
-
-#
-# uncomment exactly one of the following
-#
-# Visual C++ 2.x
-#CCTYPE *= MSVC20
-# Visual C++ > 2.x and < 6.x
-#CCTYPE *= MSVC
-# Visual C++ >= 6.x
-#CCTYPE *= MSVC60
-# Borland 5.02 or later
-CCTYPE *= BORLAND
-# mingw32/gcc-2.95.2 or better
-#CCTYPE *= GCC
-
-#
-# uncomment this if you are compiling under Windows 95/98 and command.com
-# (not needed if you're running under 4DOS/NT 6.01 or later)
-#IS_WIN95 *= define
-
-#
-# uncomment next line if you want debug version of perl (big,slow)
-# If not enabled, we automatically try to use maximum optimization
-# with all compilers that are known to have a working optimizer.
-#
-#CFG *= Debug
-
-#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-#USE_PERLCRT *= define
-
-#
-# uncomment to enable linking with setargv.obj under the Visual C
-# compiler. Setting this options enables perl to expand wildcards in
-# arguments, but it may be harder to use alternate methods like
-# File::DosGlob that are more powerful. This option is supported only with
-# Visual C.
-#
-#USE_SETARGV *= define
-
-#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located in the same
-# directory as this file.
-#
-#CRYPT_SRC *= fcrypt.c
-
-#
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
-# library, uncomment this, and make sure the library exists (see README.win32)
-# Specify the full pathname of the library.
-#
-#CRYPT_LIB *= fcrypt.lib
-
-#
-# set this if you wish to use perl's malloc
-# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it. Be prepared to recompile all
-# extensions if you change the default. Currently, this cannot be enabled
-# if you ask for USE_OBJECT above.
-#
-#PERL_MALLOC *= define
-
-#
-# set the install locations of the compiler include/libraries
-# Running VCVARS32.BAT is *required* when using Visual C.
-# Some versions of Visual C don't define MSVCDIR in the environment,
-# so you may have to set CCHOME explicitly (spaces in the path name should
-# not be quoted)
-#
-CCHOME *= c:\bc5
-#CCHOME *= $(MSVCDIR)
-#CCHOME *= D:\packages\mingw32
-CCINCDIR *= $(CCHOME)\include
-CCLIBDIR *= $(CCHOME)\lib
-
-#
-# Additional compiler flags can be specified here.
-#
-
-#
-# This should normally be disabled. Adding -DPERL_POLLUTE enables support
-# for old symbols by default, at the expense of extreme pollution. You most
-# probably just want to build modules that won't compile with
-# perl Makefile.PL POLLUTE=1
-# instead of enabling this. Please report such modules to the respective
-# authors.
-#
-#BUILDOPT += -DPERL_POLLUTE
-
-#
-# This should normally be disabled. Enabling it will disable the File::Glob
-# implementation of CORE::glob.
-#
-#BUILDOPT += -DPERL_EXTERNAL_GLOB
-
-#
-# This should normally be disabled. Enabling it causes perl to read scripts
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.
-#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
-
-#
-# This should normally be disabled. Enabling it runs a cloned toplevel
-# interpreter (*EXPERIMENTAL*, fails tests)
-#BUILDOPT += -DTOP_CLONE
-
-#
-# specify semicolon-separated list of extra directories that modules will
-# look for libraries (spaces in path names need not be quoted)
-#
-EXTRALIBDIRS *=
-
-#
-# set this to point to cmd.exe (only needed if you use some
-# alternate shell that doesn't grok cmd.exe style commands)
-#
-#SHELL *= g:\winnt\system32\cmd.exe
-
-#
-# set this to your email address (perl will guess a value from
-# from your loginname and your hostname, which may not be right)
-#
-#EMAIL *=
-
-##
-## Build configuration ends.
-##
-
-##################### CHANGE THESE ONLY IF YOU MUST #####################
-
-.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
-D_CRYPT = undef
-.ELSE
-D_CRYPT = define
-CRYPT_FLAG = -DHAVE_DES_FCRYPT
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC != undef
-USE_5005THREADS != undef
-USE_MULTI != undef
-USE_IMP_SYS != define
-.ENDIF
-
-PERL_MALLOC *= undef
-
-USE_5005THREADS *= undef
-
-.IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS != undef
-.ENDIF
-
-USE_MULTI *= undef
-USE_OBJECT *= undef
-USE_ITHREADS *= undef
-USE_IMP_SYS *= undef
-
-.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
-BUILDOPT += -DPERL_IMPLICIT_CONTEXT
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" != "undef"
-BUILDOPT += -DPERL_IMPLICIT_SYS
-.ENDIF
-
-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
-
-PROCESSOR_ARCHITECTURE *= x86
-
-.IF "$(USE_OBJECT)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-.ELIF "$(USE_5005THREADS)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-.ELIF "$(USE_MULTI)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
-.ELSE
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-ARCHNAME = $(ARCHNAME)-thread
-.ENDIF
-
-# Visual Studio 98 specific
-.IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
-DELAYLOAD *= -DELAYLOAD:wsock32.dll delayimp.lib
-
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-CFG *= Optimize
-.ENDIF
-
-ARCHDIR = ..\lib\$(ARCHNAME)
-COREDIR = ..\lib\CORE
-AUTODIR = ..\lib\auto
-LIBDIR = ..\lib
-EXTDIR = ..\ext
-PODDIR = ..\pod
-EXTUTILSDIR = $(LIBDIR)\ExtUtils
-
-#
-INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
-INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
-INST_LIB = $(INST_TOP)$(INST_VER)\lib
-INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
-INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
-INST_HTML = $(INST_POD)\html
-
-#
-# Programs to compile, build .lib files and link
-#
-
-.USESHELL :
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CC = bcc32
-LINK32 = tlink32
-LIB32 = tlib /P128
-IMPLIB = implib -c
-RSC = rc
-
-#
-# Options
-#
-RUNTIME = -D_RTLDLL
-INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
-#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
-DEFINES = -DWIN32 $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -P
-
-LIBC = cw32mti.lib
-LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib
-
-.IF "$(CFG)" == "Debug"
-OPTIMIZE = -v $(RUNTIME) -DDEBUGGING
-LINK_DBG = -v
-.ELSE
-OPTIMIZE = -O2 $(RUNTIME)
-LINK_DBG =
-.ENDIF
-
-CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
-OBJOUT_FLAG = -o
-EXEOUT_FLAG = -e
-LIBOUT_FLAG =
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CC = gcc
-LINK32 = gcc
-LIB32 = ar rc
-IMPLIB = dlltool
-RSC = rc
-
-o = .o
-a = .a
-
-#
-# Options
-#
-
-RUNTIME =
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-DEFINES = -DWIN32 $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -xc++
-
-LIBC = -lmsvcrt
-
-# same libs as MSVC
-LIBFILES = $(CRYPT_LIB) $(LIBC) \
- -lmoldname -lkernel32 -luser32 -lgdi32 \
- -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
- -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
- -lwinmm -lversion -lodbc32
-
-.IF "$(CFG)" == "Debug"
-OPTIMIZE = -g $(RUNTIME) -DDEBUGGING
-LINK_DBG = -g
-.ELSE
-OPTIMIZE = -g -O2 $(RUNTIME)
-LINK_DBG =
-.ENDIF
-
-CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
-OBJOUT_FLAG = -o
-EXEOUT_FLAG = -o
-LIBOUT_FLAG =
-
-.ELSE
-
-CC = cl
-LINK32 = link
-LIB32 = $(LINK32) -lib
-RSC = rc
-
-#
-# Options
-#
-
-RUNTIME = -MD
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
-LOCDEFS = -DPERLDLL -DPERL_CORE
-SUBSYS = console
-CXX_FLAG = -TP -GX
-
-.IF "$(USE_PERLCRT)" == ""
-.IF "$(CFG)" == "Debug"
-PERLCRTLIBC = msvcrtd.lib
-.ELSE
-PERLCRTLIBC = msvcrt.lib
-.ENDIF
-.ELSE
-.IF "$(CFG)" == "Debug"
-PERLCRTLIBC = PerlCRTD.lib
-.ELSE
-PERLCRTLIBC = PerlCRT.lib
-.ENDIF
-.ENDIF
-
-PERLEXE_RES =
-PERLDLL_RES =
-
-.IF "$(RUNTIME)" == "-MD"
-LIBC = $(PERLCRTLIBC)
-.ELSE
-LIBC = libcmt.lib
-.ENDIF
-
-.IF "$(CFG)" == "Debug"
-.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od $(RUNTIME) -Z7 -D_DEBUG -DDEBUGGING
-.ELSE
-OPTIMIZE = -Od $(RUNTIME)d -Zi -D_DEBUG -DDEBUGGING
-.ENDIF
-LINK_DBG = -debug -pdb:none
-.ELSE
-.IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 $(RUNTIME) -DNDEBUG
-OPTIMIZE = -O1 $(RUNTIME) -DNDEBUG
-.ELSE
-OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
-.ENDIF
-LINK_DBG = -release
-.ENDIF
-
-LIBBASEFILES = $(DELAYLOAD) $(CRYPT_LIB) \
- oldnames.lib kernel32.lib user32.lib gdi32.lib \
- winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib \
- oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib \
- winmm.lib version.lib odbc32.lib odbccp32.lib
-
-# we add LIBC here, since we may be using PerlCRT.dll
-LIBFILES = $(LIBBASEFILES) $(LIBC)
-
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
- $(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
- -libpath:"$(INST_COREDIR)" \
- -machine:$(PROCESSOR_ARCHITECTURE)
-OBJOUT_FLAG = -Fo
-EXEOUT_FLAG = -Fe
-LIBOUT_FLAG = /out:
-
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-OPTIMIZE += $(CXX_FLAG)
-BUILDOPT += -DPERL_OBJECT
-.ENDIF
-
-CFLAGS_O = $(CFLAGS) $(BUILDOPT)
-
-# used to allow local linking flags that are not propogated into Config.pm,
-# currently unused
-# -- BKS, 12-12-1999
-PRIV_LINK_FLAGS *=
-BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
-
-#################### do not edit below this line #######################
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-
-o *= .obj
-a *= .lib
-
-LKPRE = INPUT (
-LKPOST = )
-
-#
-# Rules
-#
-
-.SUFFIXES : .c $(o) .dll $(a) .exe .rc .res
-
-.c$(o):
- $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
-
-.y.c:
- $(NOOP)
-
-$(o).dll:
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
- $(IMPLIB) $(*B).lib $@
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
- $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
-.ELSE
- $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
-.ENDIF
-
-.rc.res:
- $(RSC) $<
-
-#
-# various targets
-MINIPERL = ..\miniperl.exe
-MINIDIR = .\mini
-PERLEXE = ..\perl.exe
-WPERLEXE = ..\wperl.exe
-GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
-MINIMOD = ..\lib\ExtUtils\Miniperl.pm
-X2P = ..\x2p\a2p.exe
-
-PL2BAT = bin\pl2bat.pl
-GLOBBAT = bin\perlglob.bat
-
-UTILS = \
- ..\utils\h2ph \
- ..\utils\splain \
- ..\utils\dprofpp \
- ..\utils\perlbug \
- ..\utils\pl2pm \
- ..\utils\c2ph \
- ..\utils\h2xs \
- ..\utils\perldoc \
- ..\utils\perlcc \
- ..\pod\checkpods \
- ..\pod\pod2html \
- ..\pod\pod2latex \
- ..\pod\pod2man \
- ..\pod\pod2text \
- ..\pod\pod2usage \
- ..\pod\podchecker \
- ..\pod\podselect \
- ..\x2p\find2perl \
- ..\x2p\s2p \
- bin\runperl.pl \
- bin\pl2bat.pl \
- bin\perlglob.pl \
- bin\search.pl
-
-.IF "$(CCTYPE)" == "BORLAND"
-
-CFGSH_TMPL = config.bc
-CFGH_TMPL = config_H.bc
-
-.ELIF "$(CCTYPE)" == "GCC"
-
-CFGSH_TMPL = config.gc
-CFGH_TMPL = config_H.gc
-.IF "$(USE_OBJECT)" == "define"
-PERLIMPLIB = ..\libperlcore$(a)
-.ELSE
-PERLIMPLIB = ..\libperl$(a)
-.ENDIF
-
-.ELSE
-
-CFGSH_TMPL = config.vc
-CFGH_TMPL = config_H.vc
-.IF "$(USE_PERLCRT)" == ""
-PERL95EXE = ..\perl95.exe
-.ENDIF
-
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-PERLIMPLIB *= ..\perl56$(a)
-PERLDLL = ..\perl56.dll
-.ELSE
-PERLIMPLIB *= ..\perl$(a)
-PERLDLL = ..\perl.dll
-.ENDIF
-
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
-
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
- -C++ -prototypes
-
-MICROCORE_SRC = \
- ..\av.c \
- ..\deb.c \
- ..\doio.c \
- ..\doop.c \
- ..\dump.c \
- ..\globals.c \
- ..\gv.c \
- ..\hv.c \
- ..\mg.c \
- ..\op.c \
- ..\perl.c \
- ..\perlapi.c \
- ..\perly.c \
- ..\pp.c \
- ..\pp_ctl.c \
- ..\pp_hot.c \
- ..\pp_sys.c \
- ..\regcomp.c \
- ..\regexec.c \
- ..\run.c \
- ..\scope.c \
- ..\sv.c \
- ..\taint.c \
- ..\toke.c \
- ..\universal.c \
- ..\utf8.c \
- ..\util.c \
- ..\xsutils.c
-
-EXTRACORE_SRC += perllib.c
-
-.IF "$(PERL_MALLOC)" == "define"
-EXTRACORE_SRC += ..\malloc.c
-.ENDIF
-
-.IF "$(USE_OBJECT)" != "define"
-EXTRACORE_SRC += ..\perlio.c
-.ENDIF
-
-WIN32_SRC = \
- .\win32.c \
- .\win32sck.c
-
-.IF "$(USE_5005THREADS)" == "define"
-WIN32_SRC += .\win32thread.c
-.ENDIF
-
-.IF "$(CRYPT_SRC)" != ""
-WIN32_SRC += .\$(CRYPT_SRC)
-.ENDIF
-
-PERL95_SRC = \
- perl95.c \
- win32mt.c \
- win32sckmt.c
-
-.IF "$(CRYPT_SRC)" != ""
-PERL95_SRC += .\$(CRYPT_SRC)
-.ENDIF
-
-DLL_SRC = $(DYNALOADER).c
-
-X2P_SRC = \
- ..\x2p\a2p.c \
- ..\x2p\hash.c \
- ..\x2p\str.c \
- ..\x2p\util.c \
- ..\x2p\walk.c
-
-CORE_NOCFG_H = \
- ..\av.h \
- ..\cop.h \
- ..\cv.h \
- ..\dosish.h \
- ..\embed.h \
- ..\form.h \
- ..\gv.h \
- ..\handy.h \
- ..\hv.h \
- ..\iperlsys.h \
- ..\mg.h \
- ..\nostdio.h \
- ..\op.h \
- ..\opcode.h \
- ..\perl.h \
- ..\perlapi.h \
- ..\perlsdio.h \
- ..\perlsfio.h \
- ..\perly.h \
- ..\pp.h \
- ..\proto.h \
- ..\regexp.h \
- ..\scope.h \
- ..\sv.h \
- ..\thread.h \
- ..\unixish.h \
- ..\utf8.h \
- ..\util.h \
- ..\warnings.h \
- ..\XSUB.h \
- ..\EXTERN.h \
- ..\perlvars.h \
- ..\intrpvar.h \
- ..\thrdvar.h \
- .\include\dirent.h \
- .\include\netdb.h \
- .\include\sys\socket.h \
- .\win32.h \
- .\perlhost.h \
- .\vdir.h \
- .\vmem.h
-
-CORE_H = $(CORE_NOCFG_H) .\config.h
-
-MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
-CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
-WIN32_OBJ = $(WIN32_SRC:db:+$(o))
-MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
-MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
-MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-PERL95_OBJ = $(PERL95_SRC:db:+$(o))
-DLL_OBJ = $(DLL_SRC:db:+$(o))
-X2P_OBJ = $(X2P_SRC:db:+$(o))
-
-PERLDLL_OBJ = $(CORE_OBJ)
-PERLEXE_OBJ = perlmain$(o)
-
-PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
-
-.IF "$(USE_SETARGV)" != ""
-SETARGV_OBJ = setargv$(o)
-.ENDIF
-
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
- Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob
-STATIC_EXT = DynaLoader
-NONXS_EXT = Errno
-
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET = $(EXTDIR)\Socket\Socket
-FCNTL = $(EXTDIR)\Fcntl\Fcntl
-OPCODE = $(EXTDIR)\Opcode\Opcode
-SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
-IO = $(EXTDIR)\IO\IO
-POSIX = $(EXTDIR)\POSIX\POSIX
-ATTRS = $(EXTDIR)\attrs\attrs
-THREAD = $(EXTDIR)\Thread\Thread
-B = $(EXTDIR)\B\B
-RE = $(EXTDIR)\re\re
-DUMPER = $(EXTDIR)\Data\Dumper\Dumper
-ERRNO = $(EXTDIR)\Errno\Errno
-PEEK = $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
-DPROF = $(EXTDIR)\Devel\DProf\DProf
-GLOB = $(EXTDIR)\File\Glob\Glob
-
-SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL = $(AUTODIR)\IO\IO.dll
-POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
-B_DLL = $(AUTODIR)\B\B.dll
-DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL = $(AUTODIR)\re\re.dll
-BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
-
-ERRNO_PM = $(LIBDIR)\Errno.pm
-
-EXTENSION_C = \
- $(SOCKET).c \
- $(FCNTL).c \
- $(OPCODE).c \
- $(SDBM_FILE).c \
- $(IO).c \
- $(POSIX).c \
- $(ATTRS).c \
- $(THREAD).c \
- $(RE).c \
- $(DUMPER).c \
- $(PEEK).c \
- $(B).c \
- $(BYTELOADER).c \
- $(DPROF).c \
- $(GLOB).c
-
-EXTENSION_DLL = \
- $(SOCKET_DLL) \
- $(FCNTL_DLL) \
- $(OPCODE_DLL) \
- $(SDBM_FILE_DLL)\
- $(IO_DLL) \
- $(POSIX_DLL) \
- $(ATTRS_DLL) \
- $(DUMPER_DLL) \
- $(PEEK_DLL) \
- $(B_DLL) \
- $(RE_DLL) \
- $(THREAD_DLL) \
- $(BYTELOADER_DLL) \
- $(DPROF_DLL) \
- $(GLOB_DLL)
-
-EXTENSION_PM = \
- $(ERRNO_PM)
-
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
-
-# vars must be separated by "\t+~\t+", since we're using the tempfile
-# version of config_sh.pl (we were overflowing someone's buffer by
-# trying to fit them all on the command line)
-# -- BKS 10-17-1999
-CFG_VARS = \
- INST_DRV=$(INST_DRV) ~ \
- INST_TOP=$(INST_TOP) ~ \
- INST_VER=$(INST_VER:s/\/\\/) ~ \
- INST_ARCH=$(INST_ARCH) ~ \
- archname=$(ARCHNAME) ~ \
- cc=$(CC) ~ \
- ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
- cf_email=$(EMAIL) ~ \
- d_crypt=$(D_CRYPT) ~ \
- d_mymalloc=$(PERL_MALLOC) ~ \
- libs=$(LIBFILES:f) ~ \
- incpath=$(CCINCDIR) ~ \
- libperl=$(PERLIMPLIB:f) ~ \
- libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \
- libc=$(LIBC) ~ \
- make=dmake ~ \
- _o=$(o) obj_ext=$(o) ~ \
- _a=$(a) lib_ext=$(a) ~ \
- static_ext=$(STATIC_EXT) ~ \
- dynamic_ext=$(DYNAMIC_EXT) ~ \
- nonxs_ext=$(NONXS_EXT) ~ \
- use5005threads=$(USE_5005THREADS) ~ \
- useithreads=$(USE_ITHREADS) ~ \
- usethreads=$(USE_5005THREADS) ~ \
- usemultiplicity=$(USE_MULTI) ~ \
- LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
- optimize=$(OPTIMIZE)
-
-#
-# set up targets varying between Win95 and WinNT builds
-#
-
-.IF "$(IS_WIN95)" == "define"
-MK2 = .\makefile.95
-RIGHTMAKE = __switch_makefiles
-NOOP = @rem
-.ELSE
-MK2 = __not_needed
-RIGHTMAKE = __not_needed
-.ENDIF
-
-#
-# Top targets
-#
-
-all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) $(PERL95EXE) \
- $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
-
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
-#----------------------------------------------------------------
-
-#-------------------- BEGIN Win95 SPECIFIC ----------------------
-
-# this target is a jump-off point for Win95
-# 1. it switches to the Win95-specific makefile if it exists
-# (__do_switch_makefiles)
-# 2. it prints a message when the Win95-specific one finishes (__done)
-# 3. it then kills this makefile by trying to make __no_such_target
-
-__switch_makefiles: __do_switch_makefiles __done __no_such_target
-
-__do_switch_makefiles:
-.IF "$(NOTFIRST)" != "true"
- if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
-.ELSE
- $(NOOP)
-.ENDIF
-
-.IF "$(NOTFIRST)" != "true"
-__done:
- @echo Build process complete. Ignore any errors after this message.
- @echo Run "dmake test" to test and "dmake install" to install
-
-.ELSE
-# dummy targets for Win95-specific makefile
-
-__done:
- $(NOOP)
-
-__no_such_target:
- $(NOOP)
-
-.ENDIF
-
-# This target is used to generate the new makefile (.\makefile.95) for Win95
-
-.\makefile.95: .\makefile.mk
- $(MINIPERL) genmk95.pl makefile.mk $(MK2)
-
-#--------------------- END Win95 SPECIFIC ---------------------
-
-# a blank target for when builds don't need to do certain things
-# this target added for Win95 port but used to keep the WinNT port able to
-# use this file
-__not_needed:
- $(NOOP)
-
-$(GLOBEXE) : perlglob$(o)
-.IF "$(CCTYPE)" == "BORLAND"
- $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
- "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
-.ELSE
- $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
- perlglob$(o) setargv$(o)
-.ENDIF
-
-perlglob$(o) : perlglob.c
-
-config.w32 : $(CFGSH_TMPL)
- copy $(CFGSH_TMPL) config.w32
-
-.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
- -del /f config.h
- copy $(CFGH_TMPL) config.h
-
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL
- $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
- $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
-
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
-regen_config_h:
- perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
- $(CFGSH_TMPL) > ..\config.sh
- -cd .. && del /f perl.exe
- cd .. && perl configpm
- -del /f $(CFGH_TMPL)
- -mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
- rename config.h $(CFGH_TMPL)
-
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
- cd .. && miniperl configpm
- if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
- $(XCOPY) ..\*.h $(COREDIR)\*.*
- $(XCOPY) *.h $(COREDIR)\*.*
- $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
- $(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
- || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
-
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-.ELSE
- $(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
-.ENDIF
-
-$(MINIDIR) :
- if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
-
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
-
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
-# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
-# unless the .IF is true), so instead we use a .ELSE with the default
-perllib$(o) : perllib.c
-.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
-.ELSE
- $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
-.ENDIF
-
-# 1. we don't want to rebuild miniperl.exe when config.h changes
-# 2. we don't want to rebuild miniperl.exe with non-default config.h
-$(MINI_OBJ) : $(CORE_NOCFG_H)
-
-$(WIN32_OBJ) : $(CORE_H)
-$(CORE_OBJ) : $(CORE_H)
-$(DLL_OBJ) : $(CORE_H)
-$(PERL95_OBJ) : $(CORE_H)
-$(X2P_OBJ) : $(CORE_H)
-
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
- $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
-
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
- @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
- $@,\n \
- $(LIBFILES)\n \
- perldll.def\n)
- $(IMPLIB) $*.lib $@
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
- dlltool --output-lib $(PERLIMPLIB) \
- --dllname $(PERLDLL:b).dll \
- --def perldll.def \
- --base-file perl.base \
- --output-exp perl.exp
- $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
- perl.exp $(LKPOST))
-.ELSE
- $(LINK32) -dll -def:perldll.def -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
-.ENDIF
- $(XCOPY) $(PERLIMPLIB) $(COREDIR)
-
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl
- cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
-
-..\x2p\a2p$(o) : ..\x2p\a2p.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
-
-..\x2p\hash$(o) : ..\x2p\hash.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
-
-..\x2p\str$(o) : ..\x2p\str.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
-
-..\x2p\util$(o) : ..\x2p\util.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
-
-..\x2p\walk$(o) : ..\x2p\walk.c
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
- $(MINIPERL) ..\x2p\find2perl.PL
- $(MINIPERL) ..\x2p\s2p.PL
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -v -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
-.ELSE
- $(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
-.ENDIF
-
-perlmain.c : runperl.c
- copy runperl.c perlmain.c
-
-perlmain$(o) : perlmain.c
- $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
- $(@:s,\,\\),\n \
- $(PERLIMPLIB) $(LIBFILES)\n)
-.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
- $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
-.ELSE
- $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) $(LIBFILES) \
- $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
- copy $(PERLEXE) $(WPERLEXE)
- editbin /subsystem:windows $(WPERLEXE)
-.ENDIF
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-
-.IF "$(CCTYPE)" != "BORLAND"
-.IF "$(CCTYPE)" != "GCC"
-.IF "$(USE_PERLCRT)" == ""
-
-perl95.c : runperl.c
- copy runperl.c perl95.c
-
-perl95$(o) : perl95.c
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c perl95.c
-
-win32sckmt$(o) : win32sck.c
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
- $(OBJOUT_FLAG)win32sckmt$(o) win32sck.c
-
-win32mt$(o) : win32.c
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
- $(OBJOUT_FLAG)win32mt$(o) win32.c
-
-DynaLoadmt$(o) : $(DYNALOADER).c
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
- $(OBJOUT_FLAG)DynaLoadmt$(o) $(DYNALOADER).c
-
-$(PERL95EXE): $(PERLDLL) $(CONFIGPM) $(PERL95_OBJ)
- $(LINK32) -subsystem:console -nodefaultlib -out:$@ $(BLINK_FLAGS) \
- $(LIBBASEFILES) $(PERL95_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) \
- libcmt.lib
-
-.ENDIF
-.ENDIF
-.ENDIF
-
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
- if not exist $(AUTODIR) mkdir $(AUTODIR)
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
- cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
- $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
-$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
- cd $(EXTDIR)\Data\$(*B) && \
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\Data\$(*B) && $(MAKE)
-
-$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
- cd $(EXTDIR)\Devel\$(*B) && \
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-
-$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
- cd $(EXTDIR)\File\$(*B) && \
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\File\$(*B) && $(MAKE)
-
-$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
- cd $(EXTDIR)\Devel\$(*B) && \
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-
-$(RE_DLL): $(PERLEXE) $(RE).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(B_DLL): $(PERLEXE) $(B).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(IO_DLL): $(PERLEXE) $(IO).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
- cd $(EXTDIR)\$(*B) && \
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- cd $(EXTDIR)\$(*B) && $(MAKE)
-
-doc: $(PERLEXE)
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
- --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-
-utils: $(PERLEXE) $(X2P)
- cd ..\utils && $(MAKE) PERL=$(MINIPERL)
- copy ..\README.win32 ..\pod\perlwin32.pod
- cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
- $(PERLEXE) $(PL2BAT) $(UTILS)
-
-distclean: clean
- -del /f $(MINIPERL) $(PERLEXE) $(PERL95EXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
- -del /f *.def *.map
- -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
- -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
- -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm
- -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
- -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
- -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
- -del /f $(LIBDIR)\File\Glob.pm
- -rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
- -rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
- -rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
- -rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
- -del /f $(PODDIR)\*.html
- -del /f $(PODDIR)\*.bat
- -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
- dprofpp *.bat
- -cd ..\x2p && del /f find2perl s2p *.bat
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
- -del /f $(CONFIGPM)
-.IF "$(PERL95EXE)" != ""
- -del /f perl95.c
-.ENDIF
- -del /f bin\*.bat
- -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
- pm_to_blib
- -rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
- -rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-
-install : all installbare installhtml
-
-installbare : $(RIGHTMAKE) utils
- $(PERLEXE) ..\installperl
-.IF "$(PERL95EXE)" != ""
- $(XCOPY) $(PERL95EXE) $(INST_BIN)\*.*
-.ENDIF
- if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
- $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
- $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
-
-installhtml : doc
- $(RCOPY) html\*.* $(INST_HTML)\*.*
-
-inst_lib : $(CONFIGPM)
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
- $(RCOPY) ..\lib $(INST_LIB)\*.*
-
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
- $(XCOPY) $(MINIPERL) ..\t\perl.exe
-.IF "$(CCTYPE)" == "BORLAND"
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
- attrib -r ..\t\*.*
- copy test ..\t
- cd ..\t && \
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-
-test-prep : all utils
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)
-.IF "$(CCTYPE)" == "BORLAND"
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
-.ELSE
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
-.ENDIF
-
-test : $(RIGHTMAKE) test-prep
- cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-notty : test-prep
- set PERL_SKIP_TTY_TEST=1 && \
- cd ..\t && $(PERLEXE) -I.\lib harness
-
-clean :
- -@erase miniperlmain$(o)
- -@erase $(MINIPERL)
- -@erase perlglob$(o)
- -@erase perlmain$(o)
- -@erase config.w32
- -@erase /f config.h
- -@erase $(GLOBEXE)
- -@erase $(PERLEXE)
- -@erase $(WPERLEXE)
- -@erase $(PERLDLL)
- -@erase $(CORE_OBJ)
- -rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
- -@erase $(WIN32_OBJ)
- -@erase $(DLL_OBJ)
- -@erase $(X2P_OBJ)
- -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
- -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
- -@erase ..\x2p\*.exe ..\x2p\*.bat
- -@erase *.ilk
- -@erase *.pdb
+#\r
+# Makefile to build perl on Windows NT using DMAKE.\r
+# Supported compilers:\r
+# Visual C++ 2.0 thro 6.0\r
+# Borland C++ 5.02\r
+# Mingw32 with gcc-2.95.2 or better **experimental**\r
+#\r
+# This is set up to build a perl.exe that runs off a shared library\r
+# (perl57.dll). Also makes individual DLLs for the XS extensions.\r
+#\r
+\r
+##\r
+## Make sure you read README.win32 *before* you mess with anything here!\r
+##\r
+\r
+##\r
+## Build configuration. Edit the values below to suit your needs.\r
+##\r
+\r
+#\r
+# Set these to wherever you want "dmake install" to put your\r
+# newly built perl.\r
+#\r
+INST_DRV *= c:\r
+INST_TOP *= $(INST_DRV)\perl\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to be versioned.\r
+# This means that the new installation will overwrite any files from the\r
+# old installation at the same INST_TOP location. Leaving it enabled is\r
+# the safest route, as perl adds the extra version directory to all the\r
+# locations it installs files to. If you disable it, an alternative\r
+# versioned installation can be obtained by setting INST_TOP above to a\r
+# path that includes an arbitrary version string.\r
+#\r
+INST_VER *= \5.7.1\r
+\r
+#\r
+# Comment this out if you DON'T want your perl installation to have\r
+# architecture specific components. This means that architecture-\r
+# specific files will be installed along with the architecture-neutral\r
+# files. Leaving it enabled is safer and more flexible, in case you\r
+# want to build multiple flavors of perl and install them together in\r
+# the same location. Commenting it out gives you a simpler\r
+# installation that is easier to understand for beginners.\r
+#\r
+INST_ARCH *= \$(ARCHNAME)\r
+\r
+#\r
+# uncomment to enable multiple interpreters. This is need for fork()\r
+# emulation.\r
+#\r
+USE_MULTI *= define\r
+\r
+#\r
+# Beginnings of interpreter cloning/threads; still very incomplete.\r
+# This should be enabled to get the fork() emulation. This needs\r
+# USE_MULTI as well.\r
+#\r
+USE_ITHREADS *= define\r
+\r
+#\r
+# uncomment to enable the implicit "host" layer for all system calls\r
+# made by perl. This needs USE_MULTI above. This is also needed to\r
+# get fork().\r
+#\r
+USE_IMP_SYS *= define\r
+\r
+#\r
+# uncomment to enable the experimental PerlIO I/O subsystem.\r
+USE_PERLIO = define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_ITHREADS instead).\r
+#\r
+# uncomment to enable threads-capabilities. This is incompatible with\r
+# USE_ITHREADS, and is only here for people who may have come to rely\r
+# on the experimental Thread support that was in 5.005.\r
+#\r
+#USE_5005THREADS *= define\r
+\r
+#\r
+# WARNING! This option is deprecated and will eventually go away (enable\r
+# USE_MULTI instead).\r
+#\r
+# uncomment next line if you want to use the PERL_OBJECT build option.\r
+# DO NOT ENABLE unless you have legacy code that relies on the C++\r
+# CPerlObj class that was available in 5.005. This cannot be enabled\r
+# if you ask for USE_5005THREADS above.\r
+#\r
+#USE_OBJECT *= define\r
+\r
+#\r
+# uncomment exactly one of the following\r
+#\r
+# Visual C++ 2.x\r
+#CCTYPE *= MSVC20\r
+# Visual C++ > 2.x and < 6.x\r
+#CCTYPE *= MSVC\r
+# Visual C++ >= 6.x\r
+CCTYPE *= MSVC60\r
+# Borland 5.02 or later\r
+#CCTYPE *= BORLAND\r
+# mingw32+gcc-2.95.2 or better\r
+#CCTYPE *= GCC\r
+\r
+#\r
+# uncomment this if your Borland compiler is older than v5.4.\r
+BCCOLD = define\r
+#\r
+# uncomment this if you want to use Borland's VCL as your CRT\r
+#BCCVCL = define\r
+\r
+#\r
+# uncomment this if you are compiling under Windows 95/98 and command.com\r
+# (not needed if you're running under 4DOS/NT 6.01 or later)\r
+#IS_WIN95 *= define\r
+\r
+#\r
+# uncomment next line if you want debug version of perl (big,slow)\r
+# If not enabled, we automatically try to use maximum optimization\r
+# with all compilers that are known to have a working optimizer.\r
+#\r
+CFG *= Debug\r
+\r
+#\r
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.\r
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.\r
+# This currently requires VC 5.0 with Service Pack 3 or later.\r
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/\r
+# and follow the directions in the package to install.\r
+#\r
+# Not recommended if you have VC 6.x and you're not running Windows 9x.\r
+#\r
+#USE_PERLCRT *= define\r
+\r
+#\r
+# uncomment to enable linking with setargv.obj under the Visual C\r
+# compiler. Setting this options enables perl to expand wildcards in\r
+# arguments, but it may be harder to use alternate methods like\r
+# File::DosGlob that are more powerful. This option is supported only with\r
+# Visual C.\r
+#\r
+#USE_SETARGV *= define\r
+\r
+#\r
+# if you have the source for des_fcrypt(), uncomment this and make sure the\r
+# file exists (see README.win32). File should be located in the same\r
+# directory as this file.\r
+#\r
+#CRYPT_SRC *= fcrypt.c\r
+\r
+#\r
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a\r
+# library, uncomment this, and make sure the library exists (see README.win32)\r
+# Specify the full pathname of the library.\r
+#\r
+#CRYPT_LIB *= fcrypt.lib\r
+\r
+#\r
+# set this if you wish to use perl's malloc\r
+# WARNING: Turning this on/off WILL break binary compatibility with extensions\r
+# you may have compiled with/without it. Be prepared to recompile all\r
+# extensions if you change the default. Currently, this cannot be enabled\r
+# if you ask for USE_IMP_SYS above.\r
+#\r
+#PERL_MALLOC *= define\r
+\r
+#\r
+# set the install locations of the compiler include/libraries\r
+# Running VCVARS32.BAT is *required* when using Visual C.\r
+# Some versions of Visual C don't define MSVCDIR in the environment,\r
+# so you may have to set CCHOME explicitly (spaces in the path name should\r
+# not be quoted)\r
+#\r
+#CCHOME *= F:\borland\bc5\r
+CCHOME *= $(MSVCDIR)\r
+#CCHOME *= c:\gcc-2.95.2\r
+CCINCDIR *= $(CCHOME)\include\r
+CCLIBDIR *= $(CCHOME)\lib\r
+\r
+#\r
+# Additional compiler flags can be specified here.\r
+#\r
+\r
+#\r
+# This should normally be disabled. Adding -DPERL_POLLUTE enables support\r
+# for old symbols by default, at the expense of extreme pollution. You most\r
+# probably just want to build modules that won't compile with\r
+# perl Makefile.PL POLLUTE=1\r
+# instead of enabling this. Please report such modules to the respective\r
+# authors.\r
+#\r
+#BUILDOPT += -DPERL_POLLUTE\r
+\r
+#\r
+# This should normally be disabled. Enabling it will disable the File::Glob\r
+# implementation of CORE::glob.\r
+#\r
+#BUILDOPT += -DPERL_EXTERNAL_GLOB\r
+\r
+#\r
+# This should normally be disabled. Enabling it causes perl to read scripts\r
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.\r
+#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS\r
+\r
+#\r
+# specify semicolon-separated list of extra directories that modules will\r
+# look for libraries (spaces in path names need not be quoted)\r
+#\r
+EXTRALIBDIRS *=\r
+\r
+#\r
+# set this to point to cmd.exe (only needed if you use some\r
+# alternate shell that doesn't grok cmd.exe style commands)\r
+#\r
+#SHELL *= g:\winnt\system32\cmd.exe\r
+\r
+#\r
+# set this to your email address (perl will guess a value from\r
+# from your loginname and your hostname, which may not be right)\r
+#\r
+#EMAIL *=\r
+\r
+##\r
+## Build configuration ends.\r
+##\r
+\r
+##################### CHANGE THESE ONLY IF YOU MUST #####################\r
+\r
+.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""\r
+D_CRYPT = undef\r
+.ELSE\r
+D_CRYPT = define\r
+CRYPT_FLAG = -DHAVE_DES_FCRYPT\r
+.ENDIF\r
+\r
+.IF "$(USE_OBJECT)" == "define"\r
+PERL_MALLOC != undef\r
+USE_5005THREADS != undef\r
+USE_MULTI != undef\r
+USE_IMP_SYS != define\r
+.ENDIF\r
+\r
+PERL_MALLOC *= undef\r
+\r
+USE_5005THREADS *= undef\r
+\r
+.IF "$(USE_5005THREADS)" == "define"\r
+USE_ITHREADS != undef\r
+.ENDIF\r
+\r
+.IF "$(USE_IMP_SYS)" == "define"\r
+PERL_MALLOC != undef\r
+.ENDIF\r
+\r
+USE_MULTI *= undef\r
+USE_OBJECT *= undef\r
+USE_ITHREADS *= undef\r
+USE_IMP_SYS *= undef\r
+USE_PERLIO *= undef\r
+USE_PERLCRT *= undef\r
+\r
+.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"\r
+USE_MULTI != define\r
+.ENDIF\r
+\r
+.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"\r
+USE_MULTI != define\r
+USE_5005THREADS != undef\r
+.ENDIF\r
+\r
+.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"\r
+BUILDOPT += -DPERL_IMPLICIT_CONTEXT\r
+.ENDIF\r
+\r
+.IF "$(USE_IMP_SYS)" != "undef"\r
+BUILDOPT += -DPERL_IMPLICIT_SYS\r
+.ENDIF\r
+\r
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE\r
+\r
+PROCESSOR_ARCHITECTURE *= x86\r
+\r
+.IF "$(USE_OBJECT)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object\r
+.ELIF "$(USE_5005THREADS)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread\r
+.ELIF "$(USE_MULTI)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi\r
+.ELSE\r
+.IF "$(USE_PERLIO)" == "define"\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio\r
+.ELSE\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
+.ENDIF\r
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
+.ENDIF\r
+\r
+.IF "$(USE_ITHREADS)" == "define"\r
+ARCHNAME !:= $(ARCHNAME)-thread\r
+.ENDIF\r
+\r
+# Visual Studio 98 specific\r
+.IF "$(CCTYPE)" == "MSVC60"\r
+\r
+# VC 6.0 can load the socket dll on demand. Makes the test suite\r
+# run in about 10% less time.\r
+DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib\r
+\r
+.IF "$(CFG)" == "Debug"\r
+.ELSE\r
+# VC 6.0 seems capable of compiling perl correctly with optimizations\r
+# enabled. Anything earlier fails tests.\r
+CFG *= Optimize\r
+.ENDIF\r
+.ENDIF\r
+\r
+ARCHDIR = ..\lib\$(ARCHNAME)\r
+COREDIR = ..\lib\CORE\r
+AUTODIR = ..\lib\auto\r
+LIBDIR = ..\lib\r
+EXTDIR = ..\ext\r
+PODDIR = ..\pod\r
+EXTUTILSDIR = $(LIBDIR)\ExtUtils\r
+\r
+#\r
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin\r
+INST_BIN = $(INST_SCRIPT)$(INST_ARCH)\r
+INST_LIB = $(INST_TOP)$(INST_VER)\lib\r
+INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)\r
+INST_COREDIR = $(INST_ARCHLIB)\CORE\r
+INST_POD = $(INST_LIB)\pod\r
+INST_HTML = $(INST_TOP)$(INST_VER)\html\r
+\r
+#\r
+# Programs to compile, build .lib files and link\r
+#\r
+\r
+.USESHELL :\r
+\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+\r
+CC = bcc32\r
+.IF "$(BCCOLD)" != "define"\r
+LINK32 = ilink32\r
+.ELSE\r
+LINK32 = tlink32\r
+.ENDIF\r
+LIB32 = tlib /P128\r
+IMPLIB = implib -c\r
+RSC = rc\r
+\r
+#\r
+# Options\r
+#\r
+INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"\r
+#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch \r
+DEFINES = -DWIN32 $(CRYPT_FLAG)\r
+LOCDEFS = -DPERLDLL -DPERL_CORE\r
+SUBSYS = console\r
+CXX_FLAG = -P\r
+\r
+LIBC = cw32mti.lib\r
+LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)\r
+\r
+.IF "$(CFG)" == "Debug"\r
+OPTIMIZE = -v -D_RTLDLL -DDEBUGGING\r
+LINK_DBG = -v\r
+.ELSE\r
+OPTIMIZE = -O2 -D_RTLDLL\r
+LINK_DBG =\r
+.ENDIF\r
+\r
+CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
+ $(PCHFLAGS) $(OPTIMIZE)\r
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"\r
+OBJOUT_FLAG = -o\r
+EXEOUT_FLAG = -e\r
+LIBOUT_FLAG =\r
+.IF "$(BCCOLD)" != "define"\r
+LINK_FLAGS += -Gn\r
+DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410\r
+.END\r
+.IF "$(BCCVCL)" == "define"\r
+LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib\r
+LINK_FLAGS += -L"$(CCLIBDIR)\Release"\r
+.END\r
+\r
+\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+\r
+CC = gcc\r
+LINK32 = gcc\r
+LIB32 = ar rc\r
+IMPLIB = dlltool\r
+RSC = rc\r
+\r
+i = .i\r
+o = .o\r
+a = .a\r
+\r
+#\r
+# Options\r
+#\r
+\r
+INCLUDES = -I.\include -I. -I.. -I$(COREDIR)\r
+DEFINES = -DWIN32 $(CRYPT_FLAG)\r
+LOCDEFS = -DPERLDLL -DPERL_CORE\r
+SUBSYS = console\r
+CXX_FLAG = -xc++\r
+\r
+LIBC = -lmsvcrt\r
+\r
+# same libs as MSVC\r
+LIBFILES = $(CRYPT_LIB) $(LIBC) \\r
+ -lmoldname -lkernel32 -luser32 -lgdi32 \\r
+ -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \\r
+ -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \\r
+ -lwinmm -lversion -lodbc32\r
+\r
+.IF "$(CFG)" == "Debug"\r
+OPTIMIZE = -g -O2 -DDEBUGGING\r
+LINK_DBG = -g\r
+.ELSE\r
+OPTIMIZE = -g -O2\r
+LINK_DBG = -g\r
+.ENDIF\r
+\r
+CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)\r
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"\r
+OBJOUT_FLAG = -o\r
+EXEOUT_FLAG = -o\r
+LIBOUT_FLAG =\r
+\r
+# NOTE: we assume that GCC uses MSVCRT.DLL\r
+BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX\r
+\r
+.ELSE\r
+\r
+CC = cl\r
+LINK32 = link\r
+LIB32 = $(LINK32) -lib\r
+RSC = rc\r
+\r
+#\r
+# Options\r
+#\r
+\r
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..\r
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX\r
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)\r
+LOCDEFS = -DPERLDLL -DPERL_CORE\r
+SUBSYS = console\r
+CXX_FLAG = -TP -GX\r
+\r
+.IF "$(USE_PERLCRT)" != "define"\r
+LIBC = msvcrt.lib\r
+.ELSE\r
+LIBC = PerlCRT.lib\r
+.ENDIF\r
+\r
+PERLEXE_RES =\r
+PERLDLL_RES =\r
+\r
+.IF "$(CFG)" == "Debug"\r
+.IF "$(CCTYPE)" == "MSVC20"\r
+OPTIMIZE = -Od -MD -Z7 -DDEBUGGING\r
+LINK_DBG = -debug -pdb:none\r
+.ELSE\r
+# -Zi requires .pdb file(s)\r
+#OPTIMIZE = -Od -MD -Zi -DDEBUGGING\r
+#LINK_DBG = -debug\r
+OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING\r
+LINK_DBG = -debug -debugtype:both -pdb:none\r
+.ENDIF\r
+.ELSE\r
+.IF "$(CFG)" == "Optimize"\r
+# -O1 yields smaller code, which turns out to be faster than -O2\r
+#OPTIMIZE = -O2 -MD -DNDEBUG\r
+OPTIMIZE = -O1 -MD -DNDEBUG\r
+.ELSE\r
+OPTIMIZE = -Od -MD -DNDEBUG\r
+.ENDIF\r
+LINK_DBG = -release\r
+.ENDIF\r
+\r
+LIBBASEFILES = $(CRYPT_LIB) \\r
+ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \\r
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \\r
+ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \\r
+ version.lib odbc32.lib odbccp32.lib\r
+\r
+# we add LIBC here, since we may be using PerlCRT.dll\r
+LIBFILES = $(LIBBASEFILES) $(LIBC)\r
+\r
+CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
+ $(PCHFLAGS) $(OPTIMIZE)\r
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \\r
+ -libpath:"$(INST_COREDIR)" \\r
+ -machine:$(PROCESSOR_ARCHITECTURE)\r
+OBJOUT_FLAG = -Fo\r
+EXEOUT_FLAG = -Fe\r
+LIBOUT_FLAG = /out:\r
+\r
+.IF "$(USE_PERLCRT)" != "define"\r
+BUILDOPT += -DPERL_MSVCRT_READFIX\r
+.ENDIF\r
+\r
+.ENDIF\r
+\r
+.IF "$(USE_OBJECT)" == "define"\r
+OPTIMIZE += $(CXX_FLAG)\r
+BUILDOPT += -DPERL_OBJECT\r
+.ENDIF\r
+\r
+CFLAGS_O = $(CFLAGS) $(BUILDOPT)\r
+\r
+# used to allow local linking flags that are not propogated into Config.pm,\r
+# currently unused\r
+# -- BKS, 12-12-1999\r
+PRIV_LINK_FLAGS *=\r
+BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)\r
+\r
+#################### do not edit below this line #######################\r
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############\r
+\r
+o *= .obj\r
+a *= .lib\r
+\r
+LKPRE = INPUT (\r
+LKPOST = )\r
+\r
+#\r
+# Rules\r
+#\r
+\r
+.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res\r
+\r
+.c$(o):\r
+ $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<\r
+\r
+.c.i:\r
+ $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@\r
+\r
+.y.c:\r
+ $(NOOP)\r
+\r
+$(o).dll:\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def\r
+ $(IMPLIB) $(*B).lib $@\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)\r
+ $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@\r
+.ELSE\r
+ $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \\r
+ -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)\r
+.ENDIF\r
+\r
+.rc.res:\r
+ $(RSC) -i.. $<\r
+\r
+#\r
+# various targets\r
+MINIPERL = ..\miniperl.exe\r
+MINIDIR = .\mini\r
+PERLEXE = ..\perl.exe\r
+WPERLEXE = ..\wperl.exe\r
+GLOBEXE = ..\perlglob.exe\r
+CONFIGPM = ..\lib\Config.pm\r
+MINIMOD = ..\lib\ExtUtils\Miniperl.pm\r
+X2P = ..\x2p\a2p.exe\r
+\r
+# Nominate a target which causes extensions to be re-built\r
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend\r
+# on and really only the interface - i.e. the .def file used to export symbols\r
+# from the .dll\r
+PERLDEP = perldll.def\r
+\r
+\r
+PL2BAT = bin\pl2bat.pl\r
+GLOBBAT = bin\perlglob.bat\r
+\r
+UTILS = \\r
+ ..\utils\h2ph \\r
+ ..\utils\splain \\r
+ ..\utils\dprofpp \\r
+ ..\utils\perlbug \\r
+ ..\utils\pl2pm \\r
+ ..\utils\c2ph \\r
+ ..\utils\h2xs \\r
+ ..\utils\perldoc \\r
+ ..\utils\perlcc \\r
+ ..\pod\checkpods \\r
+ ..\pod\pod2html \\r
+ ..\pod\pod2latex \\r
+ ..\pod\pod2man \\r
+ ..\pod\pod2text \\r
+ ..\pod\pod2usage \\r
+ ..\pod\podchecker \\r
+ ..\pod\podselect \\r
+ ..\x2p\find2perl \\r
+ ..\x2p\s2p \\r
+ bin\exetype.pl \\r
+ bin\runperl.pl \\r
+ bin\pl2bat.pl \\r
+ bin\perlglob.pl \\r
+ bin\search.pl\r
+\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+\r
+CFGSH_TMPL = config.bc\r
+CFGH_TMPL = config_H.bc\r
+\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+\r
+CFGSH_TMPL = config.gc\r
+CFGH_TMPL = config_H.gc\r
+PERLIMPLIB = ..\libperl57$(a)\r
+\r
+.ELSE\r
+\r
+CFGSH_TMPL = config.vc\r
+CFGH_TMPL = config_H.vc\r
+\r
+.ENDIF\r
+\r
+# makedef.pl must be updated if this changes, and this should normally\r
+# only change when there is an incompatible revision of the public API.\r
+# XXX so why did we change it from perl56 to perl57?\r
+PERLIMPLIB *= ..\perl57$(a)\r
+PERLDLL = ..\perl57.dll\r
+\r
+XCOPY = xcopy /f /r /i /d\r
+RCOPY = xcopy /f /r /i /e /d\r
+NOOP = @echo\r
+\r
+#\r
+# filenames given to xsubpp must have forward slashes (since it puts\r
+# full pathnames in #line strings)\r
+XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \\r
+ -C++ -prototypes\r
+\r
+MICROCORE_SRC = \\r
+ ..\av.c \\r
+ ..\deb.c \\r
+ ..\doio.c \\r
+ ..\doop.c \\r
+ ..\dump.c \\r
+ ..\globals.c \\r
+ ..\gv.c \\r
+ ..\hv.c \\r
+ ..\mg.c \\r
+ ..\op.c \\r
+ ..\perl.c \\r
+ ..\perlapi.c \\r
+ ..\perly.c \\r
+ ..\pp.c \\r
+ ..\pp_ctl.c \\r
+ ..\pp_hot.c \\r
+ ..\pp_sys.c \\r
+ ..\regcomp.c \\r
+ ..\regexec.c \\r
+ ..\run.c \\r
+ ..\scope.c \\r
+ ..\sv.c \\r
+ ..\taint.c \\r
+ ..\toke.c \\r
+ ..\universal.c \\r
+ ..\utf8.c \\r
+ ..\util.c \\r
+ ..\xsutils.c\r
+\r
+EXTRACORE_SRC += perllib.c\r
+\r
+.IF "$(PERL_MALLOC)" == "define"\r
+EXTRACORE_SRC += ..\malloc.c\r
+.ENDIF\r
+\r
+.IF "$(USE_OBJECT)" != "define"\r
+EXTRACORE_SRC += ..\perlio.c\r
+.ENDIF\r
+\r
+WIN32_SRC = \\r
+ .\win32.c \\r
+ .\win32sck.c \\r
+ .\win32thread.c\r
+\r
+.IF "$(CRYPT_SRC)" != ""\r
+WIN32_SRC += .\$(CRYPT_SRC)\r
+.ENDIF\r
+\r
+DLL_SRC = $(DYNALOADER).c\r
+\r
+X2P_SRC = \\r
+ ..\x2p\a2p.c \\r
+ ..\x2p\hash.c \\r
+ ..\x2p\str.c \\r
+ ..\x2p\util.c \\r
+ ..\x2p\walk.c\r
+\r
+CORE_NOCFG_H = \\r
+ ..\av.h \\r
+ ..\cop.h \\r
+ ..\cv.h \\r
+ ..\dosish.h \\r
+ ..\embed.h \\r
+ ..\form.h \\r
+ ..\gv.h \\r
+ ..\handy.h \\r
+ ..\hv.h \\r
+ ..\iperlsys.h \\r
+ ..\mg.h \\r
+ ..\nostdio.h \\r
+ ..\op.h \\r
+ ..\opcode.h \\r
+ ..\perl.h \\r
+ ..\perlapi.h \\r
+ ..\perlsdio.h \\r
+ ..\perlsfio.h \\r
+ ..\perly.h \\r
+ ..\pp.h \\r
+ ..\proto.h \\r
+ ..\regexp.h \\r
+ ..\scope.h \\r
+ ..\sv.h \\r
+ ..\thread.h \\r
+ ..\unixish.h \\r
+ ..\utf8.h \\r
+ ..\util.h \\r
+ ..\warnings.h \\r
+ ..\XSUB.h \\r
+ ..\EXTERN.h \\r
+ ..\perlvars.h \\r
+ ..\intrpvar.h \\r
+ ..\thrdvar.h \\r
+ .\include\dirent.h \\r
+ .\include\netdb.h \\r
+ .\include\sys\socket.h \\r
+ .\win32.h\r
+\r
+CORE_H = $(CORE_NOCFG_H) .\config.h\r
+\r
+MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))\r
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))\r
+WIN32_OBJ = $(WIN32_SRC:db:+$(o))\r
+MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}\r
+MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}\r
+MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)\r
+DLL_OBJ = $(DLL_SRC:db:+$(o))\r
+X2P_OBJ = $(X2P_SRC:db:+$(o))\r
+\r
+PERLDLL_OBJ = $(CORE_OBJ)\r
+PERLEXE_OBJ = perlmain$(o)\r
+\r
+PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)\r
+\r
+.IF "$(USE_SETARGV)" != ""\r
+SETARGV_OBJ = setargv$(o)\r
+.ENDIF\r
+\r
+DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \\r
+ Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \\r
+ Sys/Hostname Storable Filter/Util/Call Encode \\r
+ Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes Time/Piece\r
+STATIC_EXT = DynaLoader\r
+NONXS_EXT = Errno\r
+\r
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader\r
+\r
+POD2HTML = $(PODDIR)\pod2html\r
+POD2MAN = $(PODDIR)\pod2man\r
+POD2LATEX = $(PODDIR)\pod2latex\r
+POD2TEXT = $(PODDIR)\pod2text\r
+\r
+# vars must be separated by "\t+~\t+", since we're using the tempfile\r
+# version of config_sh.pl (we were overflowing someone's buffer by\r
+# trying to fit them all on the command line)\r
+# -- BKS 10-17-1999\r
+CFG_VARS = \\r
+ INST_DRV=$(INST_DRV) ~ \\r
+ INST_TOP=$(INST_TOP:s/\/\\/) ~ \\r
+ INST_VER=$(INST_VER:s/\/\\/) ~ \\r
+ INST_ARCH=$(INST_ARCH) ~ \\r
+ archname=$(ARCHNAME) ~ \\r
+ cc=$(CC) ~ \\r
+ ld=$(LINK32) ~ \\r
+ ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \\r
+ cf_email=$(EMAIL) ~ \\r
+ d_crypt=$(D_CRYPT) ~ \\r
+ d_mymalloc=$(PERL_MALLOC) ~ \\r
+ libs=$(LIBFILES:f) ~ \\r
+ incpath=$(CCINCDIR:s/\/\\/) ~ \\r
+ libperl=$(PERLIMPLIB:f) ~ \\r
+ libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \\r
+ libc=$(LIBC) ~ \\r
+ make=dmake ~ \\r
+ _o=$(o) obj_ext=$(o) ~ \\r
+ _a=$(a) lib_ext=$(a) ~ \\r
+ static_ext=$(STATIC_EXT) ~ \\r
+ use5005threads=$(USE_5005THREADS) ~ \\r
+ useithreads=$(USE_ITHREADS) ~ \\r
+ usethreads=$(USE_5005THREADS) ~ \\r
+ usemultiplicity=$(USE_MULTI) ~ \\r
+ useperlio=$(USE_PERLIO) ~ \\r
+ LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \\r
+ optimize=$(OPTIMIZE)\r
+\r
+#\r
+# set up targets varying between Win95 and WinNT builds\r
+#\r
+\r
+.IF "$(IS_WIN95)" == "define"\r
+MK2 = .\makefile.95\r
+RIGHTMAKE = __switch_makefiles\r
+NOOP = @rem\r
+.ELSE\r
+MK2 = __not_needed\r
+RIGHTMAKE =\r
+.ENDIF\r
+\r
+#\r
+# Top targets\r
+#\r
+\r
+all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \\r
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \\r
+ $(X2P) Extensions \r
+\r
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c\r
+\r
+#----------------------------------------------------------------\r
+\r
+#-------------------- BEGIN Win95 SPECIFIC ----------------------\r
+\r
+# this target is a jump-off point for Win95\r
+# 1. it switches to the Win95-specific makefile if it exists\r
+# (__do_switch_makefiles)\r
+# 2. it prints a message when the Win95-specific one finishes (__done)\r
+# 3. it then kills this makefile by trying to make __no_such_target\r
+\r
+__switch_makefiles: __do_switch_makefiles __done __no_such_target\r
+\r
+__do_switch_makefiles:\r
+.IF "$(NOTFIRST)" != "true"\r
+ if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true\r
+.ELSE\r
+ $(NOOP)\r
+.ENDIF\r
+\r
+.IF "$(NOTFIRST)" != "true"\r
+__done:\r
+ @echo Build process complete. Ignore any errors after this message.\r
+ @echo Run "dmake test" to test and "dmake install" to install\r
+\r
+.ELSE\r
+# dummy targets for Win95-specific makefile\r
+\r
+__done:\r
+ $(NOOP)\r
+\r
+__no_such_target:\r
+ $(NOOP)\r
+\r
+.ENDIF\r
+\r
+# This target is used to generate the new makefile (.\makefile.95) for Win95\r
+\r
+.\makefile.95: .\makefile.mk\r
+ $(MINIPERL) genmk95.pl makefile.mk $(MK2)\r
+\r
+#--------------------- END Win95 SPECIFIC ---------------------\r
+\r
+# a blank target for when builds don't need to do certain things\r
+# this target added for Win95 port but used to keep the WinNT port able to\r
+# use this file\r
+__not_needed:\r
+ $(NOOP)\r
+\r
+$(GLOBEXE) : perlglob$(o)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c\r
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \\r
+ "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)\r
+.ELSE\r
+ $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \\r
+ perlglob$(o) setargv$(o)\r
+.ENDIF\r
+\r
+perlglob$(o) : perlglob.c\r
+\r
+config.w32 : $(CFGSH_TMPL)\r
+ copy $(CFGSH_TMPL) config.w32\r
+\r
+.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)\r
+ -del /f config.h\r
+ copy $(CFGH_TMPL) config.h\r
+\r
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm\r
+ $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \\r
+ $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh\r
+\r
+# this target is for when changes to the main config.sh happen\r
+# edit config.{b,v,g}c and make this target once for each supported\r
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)\r
+regen_config_h:\r
+ perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \\r
+ $(CFGSH_TMPL) > ..\config.sh\r
+ -cd .. && del /f perl.exe\r
+ cd .. && perl configpm\r
+ -del /f $(CFGH_TMPL)\r
+ -mkdir $(COREDIR)\r
+ -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
+ rename config.h $(CFGH_TMPL)\r
+\r
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl\r
+ cd .. && miniperl configpm\r
+ if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)\r
+ $(XCOPY) ..\*.h $(COREDIR)\*.*\r
+ $(XCOPY) *.h $(COREDIR)\*.*\r
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*\r
+ $(RCOPY) include $(COREDIR)\*.*\r
+ $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \\r
+ || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)\r
+\r
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
+ @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \\r
+ $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
+.ELSE\r
+ $(LINK32) -subsystem:console -out:$@ \\r
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))\r
+.ENDIF\r
+\r
+$(MINIDIR) :\r
+ if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"\r
+\r
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)\r
+ $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c\r
+\r
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)\r
+ $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c\r
+\r
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c\r
+# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless\r
+# unless the .IF is true), so instead we use a .ELSE with the default.\r
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h\r
+\r
+perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h\r
+.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"\r
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c\r
+.ELSE\r
+ $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c\r
+.ENDIF\r
+\r
+# 1. we don't want to rebuild miniperl.exe when config.h changes\r
+# 2. we don't want to rebuild miniperl.exe with non-default config.h\r
+$(MINI_OBJ) : $(CORE_NOCFG_H)\r
+\r
+$(WIN32_OBJ) : $(CORE_H)\r
+$(CORE_OBJ) : $(CORE_H)\r
+$(DLL_OBJ) : $(CORE_H)\r
+$(X2P_OBJ) : $(CORE_H)\r
+\r
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl\r
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \\r
+ $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def\r
+\r
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpd -ap $(BLINK_FLAGS) \\r
+ @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \\r
+ $@,\n \\r
+ $(LIBFILES)\n \\r
+ perldll.def\n)\r
+ $(IMPLIB) $*.lib $@\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \\r
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
+ dlltool --output-lib $(PERLIMPLIB) \\r
+ --dllname $(PERLDLL:b).dll \\r
+ --def perldll.def \\r
+ --base-file perl.base \\r
+ --output-exp perl.exp\r
+ $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \\r
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \\r
+ perl.exp $(LKPOST))\r
+.ELSE\r
+ $(LINK32) -dll -def:perldll.def -out:$@ \\r
+ @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \\r
+ $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))\r
+.ENDIF\r
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)\r
+\r
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl\r
+ cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm\r
+\r
+..\x2p\a2p$(o) : ..\x2p\a2p.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c\r
+\r
+..\x2p\hash$(o) : ..\x2p\hash.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c\r
+\r
+..\x2p\str$(o) : ..\x2p\str.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c\r
+\r
+..\x2p\util$(o) : ..\x2p\util.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c\r
+\r
+..\x2p\walk$(o) : ..\x2p\walk.c\r
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c\r
+\r
+$(X2P) : $(MINIPERL) $(X2P_OBJ)\r
+ $(MINIPERL) ..\x2p\find2perl.PL\r
+ $(MINIPERL) ..\x2p\s2p.PL\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
+ @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -v -o $@ $(BLINK_FLAGS) \\r
+ $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
+.ELSE\r
+ $(LINK32) -subsystem:console -out:$@ \\r
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))\r
+.ENDIF\r
+\r
+perlmain.c : runperl.c\r
+ copy runperl.c perlmain.c\r
+\r
+perlmain$(o) : perlmain.c\r
+ $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c\r
+\r
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
+ @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \\r
+ $(@:s,\,\\),\n \\r
+ $(PERLIMPLIB) $(LIBFILES)\n)\r
+.ELIF "$(CCTYPE)" == "GCC"\r
+ $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \\r
+ $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)\r
+.ELSE\r
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \\r
+ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)\r
+.ENDIF\r
+ copy $(PERLEXE) $(WPERLEXE)\r
+ $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS\r
+ copy splittree.pl ..\r
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+\r
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)\r
+ if not exist $(AUTODIR) mkdir $(AUTODIR)\r
+ cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL\r
+ cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL\r
+ $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)\r
+ $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)\r
+ cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c\r
+ $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .\r
+\r
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs\r
+ copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs\r
+\r
+#----------------------------------------------------------------------------------\r
+Extensions : buildext.pl $(PERLDEP) $(CONFIGPM) \r
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)\r
+\r
+Extensions_clean : \r
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean\r
+\r
+#----------------------------------------------------------------------------------\r
+\r
+\r
+doc: $(PERLEXE)\r
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \\r
+ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\\r
+ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse\r
+\r
+utils: $(PERLEXE) $(X2P)\r
+ cd ..\utils && $(MAKE) PERL=$(MINIPERL)\r
+ copy ..\README.aix ..\pod\perlaix.pod\r
+ copy ..\README.amiga ..\pod\perlamiga.pod\r
+ copy ..\README.apollo ..\pod\perlapollo.pod\r
+ copy ..\README.beos ..\pod\perlbeos.pod\r
+ copy ..\README.bs2000 ..\pod\perlbs2000.pod\r
+ copy ..\README.cygwin ..\pod\perlcygwin.pod\r
+ copy ..\README.dgux ..\pod\perldgux.pod\r
+ copy ..\README.dos ..\pod\perldos.pod\r
+ copy ..\README.epoc ..\pod\perlepoc.pod\r
+ copy ..\README.hpux ..\pod\perlhpux.pod\r
+ copy ..\README.hurd ..\pod\perlhurd.pod\r
+ copy ..\README.machten ..\pod\perlmachten.pod\r
+ copy ..\README.macos ..\pod\perlmacos.pod\r
+ copy ..\README.mint ..\pod\perlmint.pod\r
+ copy ..\README.mpeix ..\pod\perlmpeix.pod\r
+ copy ..\README.os2 ..\pod\perlos2.pod\r
+ copy ..\README.os390 ..\pod\perlos390.pod\r
+ copy ..\README.plan9 ..\pod\perlplan9.pod\r
+ copy ..\README.qnx ..\pod\perlqnx.pod\r
+ copy ..\README.solaris ..\pod\perlsolaris.pod\r
+ copy ..\README.tru64 ..\pod\perltru64.pod\r
+ copy ..\README.vmesa ..\pod\perlvmesa.pod\r
+ copy ..\vms\perlvms.pod ..\pod\perlvms.pod\r
+ copy ..\README.vos ..\pod\perlvos.pod\r
+ copy ..\README.win32 ..\pod\perlwin32.pod\r
+ cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters\r
+ cd ..\lib && $(PERLEXE) lib_pm.PL\r
+ $(PERLEXE) $(PL2BAT) $(UTILS)\r
+\r
+distclean: clean\r
+ -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \\r
+ $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)\r
+ -del /f *.def *.map\r
+ -del /f $(EXTDIR)\DynaLoader\dl_win32.xs\r
+ -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm\r
+ -del /f $(LIBDIR)\XSLoader.pm\r
+ -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm\r
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm\r
+ -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm\r
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm\r
+ -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm\r
+ -del /f $(LIBDIR)\PerlIO\Scalar.pm\r
+ -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm\r
+ -del /f $(LIBDIR)\File\Glob.pm\r
+ -del /f $(LIBDIR)\Storable.pm\r
+ -del /f $(LIBDIR)\Filter\Util\Call.pm\r
+ -del /f $(LIBDIR)\Digest\MD5.pm\r
+ -del /f $(LIBDIR)\MIME\Base64.pm\r
+ -del /f $(LIBDIR)\MIME\QuotedPrint.pm\r
+ -del /f $(LIBDIR)\Time\HiRes.pm\r
+ -del /f $(LIBDIR)\List\Util.pm\r
+ -del /f $(LIBDIR)\Scalar\Util.pm\r
+ -del /f $(LIBDIR)\Time\Piece.pm\r
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO\r
+ -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread\r
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B\r
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data\r
+ -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter\r
+ -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter\r
+ -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest\r
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME\r
+ -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List\r
+ -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar\r
+ -cd $(PODDIR) && del /f *.html *.bat checkpods \\r
+ perlaix.pod perlamiga.pod perlapollo.pod \\r
+ perlbeos.pod perlbs2000.pod perlcygwin.pod perldgux.pod \\r
+ perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \\r
+ perlmachten.pod perlmint.pod \\r
+ perlmacos.pod perlmpeix.pod perlos2.pod perlos390.pod \\r
+ perlplan9.pod perlqnx.pod \\r
+ perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \\r
+ perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \\r
+ podchecker podselect\r
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \\r
+ dprofpp *.bat\r
+ -cd ..\x2p && del /f find2perl s2p *.bat\r
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new\r
+ -del /f $(CONFIGPM)\r
+ -del /f bin\*.bat\r
+ -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \\r
+ pm_to_blib\r
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)\r
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)\r
+\r
+install : all installbare installhtml\r
+\r
+installbare : $(RIGHTMAKE) utils\r
+ $(PERLEXE) ..\installperl\r
+ if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*\r
+ $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*\r
+ $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*\r
+\r
+installhtml : doc\r
+ $(RCOPY) html\*.* $(INST_HTML)\*.*\r
+\r
+inst_lib : $(CONFIGPM)\r
+ copy splittree.pl ..\r
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
+ $(RCOPY) ..\lib $(INST_LIB)\*.*\r
+\r
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils\r
+ $(XCOPY) $(MINIPERL) ..\t\perl.exe\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(XCOPY) $(GLOBBAT) ..\t\$(NULL)\r
+.ELSE\r
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+.ENDIF\r
+ attrib -r ..\t\*.*\r
+ copy test ..\t\r
+ cd ..\t && \\r
+ $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t\r
+\r
+test-prep : all utils\r
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)\r
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)\r
+.IF "$(CCTYPE)" == "BORLAND"\r
+ $(XCOPY) $(GLOBBAT) ..\t\$(NULL)\r
+.ELSE\r
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
+.ENDIF\r
+\r
+test : $(RIGHTMAKE) test-prep\r
+ cd ..\t && $(PERLEXE) -I..\lib harness\r
+\r
+test-notty : test-prep\r
+ set PERL_SKIP_TTY_TEST=1 && \\r
+ cd ..\t && $(PERLEXE) -I.\lib harness\r
+\r
+test-wide : test-prep\r
+ set HARNESS_PERL_SWITCHES=-C && \\r
+ cd ..\t && $(PERLEXE) -I..\lib harness\r
+\r
+test-wide-notty : test-prep\r
+ set PERL_SKIP_TTY_TEST=1 && \\r
+ set HARNESS_PERL_SWITCHES=-C && \\r
+ cd ..\t && $(PERLEXE) -I..\lib harness\r
+\r
+clean : Extensions_clean\r
+ -@erase miniperlmain$(o)\r
+ -@erase $(MINIPERL)\r
+ -@erase perlglob$(o)\r
+ -@erase perlmain$(o)\r
+ -@erase config.w32\r
+ -@erase /f config.h\r
+ -@erase $(GLOBEXE)\r
+ -@erase $(PERLEXE)\r
+ -@erase $(WPERLEXE)\r
+ -@erase $(PERLDLL)\r
+ -@erase $(CORE_OBJ)\r
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)\r
+ -@erase $(WIN32_OBJ)\r
+ -@erase $(DLL_OBJ)\r
+ -@erase $(X2P_OBJ)\r
+ -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res\r
+ -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat\r
+ -@erase ..\x2p\*.exe ..\x2p\*.bat\r
+ -@erase *.ilk\r
+ -@erase *.pdb\r
+\r
+# Handy way to run perlbug -ok without having to install and run the\r
+# installed perlbug. We don't re-run the tests here - we trust the user.\r
+# Please *don't* use this unless all tests pass.\r
+# If you want to report test failures, use "dmake nok" instead.\r
+ok: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"\r
+\r
+okfile: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok\r
+\r
+nok: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"\r
+\r
+nokfile: utils\r
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok\r
projects / p5sagit/p5-mst-13.2.git / blobdiff