#
-# Makefile to build perl on Windowns NT using DMAKE.
+# Makefile to build perl on Windows NT using DMAKE.
# Supported compilers:
# Visual C++ 2.0 thro 5.0
# Borland C++ 5.02
-# Mingw32-0.1.4 with gcc-2.7.2
+# Mingw32 with gcc-2.8.1 or egcs-1.0.2 **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
# (perl.dll). Also makes individual DLLs for the XS extensions.
#
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+
+##
+## Build configuration. Edit the values below to suit your needs.
+##
+
#
# Set these to wherever you want "nmake install" to put your
# newly built perl.
+#
INST_DRV *= c:
INST_TOP *= $(INST_DRV)\perl
+#
# Comment this out if you DON'T want your perl installation to be versioned.
# This means that the new installation will overwrite any files from the
# old installation at the same INST_TOP location. Leaving it enabled is
# locations it installs files to. If you disable it, an alternative
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
-INST_VER *= \5.00466
+#
+INST_VER *= \5.00561
+
+#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components. This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files. Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location. Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+INST_ARCH *= \$(ARCHNAME)
#
+# XXX WARNING! This option currently undergoing changes. May be broken.
+#
# uncomment to enable threads-capabilities
+#
#USE_THREADS *= define
#
-# uncomment one
+# XXX WARNING! This option currently undergoing changes. May be broken.
+#
+# uncomment to enable multiple interpreters
+#
+#USE_MULTI *= define
+
+#
+# XXX WARNING! This option currently undergoing changes. May be broken.
+#
+# uncomment next line if you want to use the perl object
+# Currently, this cannot be enabled if you ask for threads above, or
+# if you are using GCC or EGCS.
+#
+#USE_OBJECT *= define
+
+#
+# uncomment exactly one of the following
+#
+# Visual C++ 2.x
#CCTYPE *= MSVC20
+# Visual C++ > 2.x and < 6.x
#CCTYPE *= MSVC
+# Visual C++ >= 6.x
+#CCTYPE *= MSVC60
+# Borland 5.02 or later
CCTYPE *= BORLAND
+# mingw32/egcs or mingw32/gcc
#CCTYPE *= GCC
#
-# uncomment next line if you want to use the perl object
-# Currently, this cannot be enabled if you ask for threads above
-#OBJECT *= -DPERL_OBJECT
-
-#
# uncomment next line if you want debug version of perl (big,slow)
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
+#
#CFG *= Debug
#
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
+# Highly recommended. It has patches that fix known bugs in MSVCRT.DLL.
+# This currently requires VC 5.0 with Service Pack 3 or later.
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
+# and follow the directions in the package to install.
+#
+#USE_PERLCRT *= define
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful. This option is supported only with
+# Visual C.
+#
+#USE_SETARGV *= define
+
+#
# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located at the perl
-# top level directory.
-#CRYPT_SRC *= des_fcrypt.c
+# file exists (see README.win32). File should be located in the same
+# directory as this file.
+#
+#CRYPT_SRC *= fcrypt.c
#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
# library, uncomment this, and make sure the library exists (see README.win32)
# Specify the full pathname of the library.
-#CRYPT_LIB *= des_fcrypt.lib
+#
+#CRYPT_LIB *= fcrypt.lib
#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it. Be prepared to recompile all extensions
-# if you change the default. Currently, this cannot be enabled if you ask for
-# PERL_OBJECT above.
+# you may have compiled with/without it. Be prepared to recompile all
+# extensions if you change the default. Currently, this cannot be enabled
+# if you ask for USE_OBJECT above.
+#
#PERL_MALLOC *= define
#
# set the install locations of the compiler include/libraries
+# Running VCVARS32.BAT is *required* when using Visual C.
+# Some versions of Visual C don't define MSVCDIR in the environment,
+# so you may have to set CCHOME explicitly (spaces in the path name should
+# not be quoted)
#
-#CCHOME *= f:\msdev\vc
-CCHOME *= C:\bc5
+CCHOME *= d:\bc5
+#CCHOME *= $(MSVCDIR)
#CCHOME *= D:\packages\mingw32
CCINCDIR *= $(CCHOME)\include
CCLIBDIR *= $(CCHOME)\lib
#
+# additional compiler flags can be specified here.
+#
+# Adding -DPERL_POLLUTE enables support for old symbols, at the expense of
+# extreme pollution. You most probably want this if you're compiling modules
+# from CPAN, or other such serious uses of this experimental perl release.
+# We don't enable this by default because we want the modules to get fixed
+# instead of clinging to shortcuts like this one.
+#
+#BUILDOPT += -DPERL_POLLUTE
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS *=
+
+#
# set this to point to cmd.exe (only needed if you use some
# alternate shell that doesn't grok cmd.exe style commands)
+#
#SHELL *= g:\winnt\system32\cmd.exe
#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
-#EMAIL *=
+#
+#EMAIL *=
+
+##
+## Build configuration ends.
+##
##################### CHANGE THESE ONLY IF YOU MUST #####################
CRYPT_FLAG = -DHAVE_DES_FCRYPT
.ENDIF
-.IF "$(OBJECT)" != ""
+.IF "$(USE_OBJECT)" == "define"
PERL_MALLOC != undef
+USE_THREADS != undef
+USE_MULTI != undef
.ENDIF
PERL_MALLOC *= undef
USE_THREADS *= undef
+USE_MULTI *= undef
+USE_OBJECT *= undef
+
+.IF "$(USE_MULTI)$(USE_THREADS)$(USE_OBJECT)" != "undefundefundef"
+BUILDOPT += -DPERL_IMPLICIT_CONTEXT
+.ENDIF
-#BUILDOPT *= -DMULTIPLICITY
-#BUILDOPT *= -DPERL_GLOBAL_STRUCT -DMULTIPLICITY
-# -DUSE_PERLIO -D__STDC__=1 -DUSE_SFIO -DI_SFIO -I\sfio97\include
.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
PROCESSOR_ARCHITECTURE *= x86
-.IF "$(USE_THREADS)" == "define"
+.IF "$(USE_OBJECT)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
+.ELIF "$(USE_THREADS)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
+.ELIF "$(USE_MULTI)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
.ELSE
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
.ENDIF
-ARCHDIR = ..\lib\$(ARCHNAME)
+# Visual Studio 98 specific
+.IF "$(CCTYPE)" == "MSVC60"
+
+# VC 6.0 can load the socket dll on demand. Makes the test suite
+# run in about 10% less time.
+DELAYLOAD *= -DELAYLOAD:wsock32.dll delayimp.lib
+
+# VC 6.0 seems capable of compiling perl correctly with optimizations
+# enabled. Anything earlier fails tests.
+CFG *= Optimize
+.ENDIF
+
COREDIR = ..\lib\CORE
AUTODIR = ..\lib\auto
# Options
#
RUNTIME = -D_RTLDLL
-INCLUDES = -I.\include -I. -I.. -I$(CCINCDIR)
+INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
-DEFINES = -DWIN32 $(BUILDOPT) $(CRYPT_FLAG)
+DEFINES = -DWIN32 $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -P
LINK_DBG =
.ENDIF
-CFLAGS = -w -d -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L$(CCLIBDIR)
+LINK_FLAGS = $(LINK_DBG) -L"$(CCLIBDIR)"
OBJOUT_FLAG = -o
EXEOUT_FLAG = -e
LIBOUT_FLAG =
.ELIF "$(CCTYPE)" == "GCC"
-CC = gcc -pipe
-LINK32 = gcc -pipe
+CC = gcc
+LINK32 = gcc
LIB32 = ar rc
IMPLIB = dlltool
o = .o
+a = .a
#
# Options
#
RUNTIME =
-INCLUDES = -I.\include -I. -I..
-DEFINES = -DWIN32 $(BUILDOPT) $(CRYPT_FLAG)
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..
+DEFINES = -DWIN32 $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -xc++
LIBC = -lcrtdll
-LIBFILES = $(CRYPT_LIB) -ladvapi32 -luser32 -lnetapi32 -lwsock32 -lmingw32 \
- -lgcc -lmoldname $(LIBC) -lkernel32
+LIBFILES = $(CRYPT_LIB) -ladvapi32 -luser32 -lnetapi32 -lwsock32 \
+ -lmingw32 -lgcc -lmoldname $(LIBC) -lkernel32
.IF "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 $(RUNTIME) -DDEBUGGING
.ENDIF
CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L$(CCLIBDIR)
+LINK_FLAGS = $(LINK_DBG) -L"$(CCLIBDIR)"
OBJOUT_FLAG = -o
EXEOUT_FLAG = -o
LIBOUT_FLAG =
#
RUNTIME = -MD
-INCLUDES = -I.\include -I. -I..
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..
#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE $(BUILDOPT) $(CRYPT_FLAG)
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -TP -GX
+.IF "$(USE_PERLCRT)" == ""
+.IF "$(CFG)" == "Debug"
+PERLCRTLIBC = msvcrtd.lib
+.ELSE
+PERLCRTLIBC = msvcrt.lib
+.ENDIF
+.ELSE
+.IF "$(CFG)" == "Debug"
+PERLCRTLIBC = PerlCRTD.lib
+.ELSE
+PERLCRTLIBC = PerlCRT.lib
+.ENDIF
+.ENDIF
+
.IF "$(RUNTIME)" == "-MD"
-LIBC = msvcrt.lib
+LIBC = $(PERLCRTLIBC)
.ELSE
LIBC = libcmt.lib
.ENDIF
.ENDIF
LINK_DBG = -debug -pdb:none
.ELSE
-.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
+.IF "$(CFG)" == "Optimize"
+# -O1 yields smaller code, which turns out to be faster than -O2
+#OPTIMIZE = -O2 $(RUNTIME) -DNDEBUG
+OPTIMIZE = -O1 $(RUNTIME) -DNDEBUG
.ELSE
OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
.ENDIF
LINK_DBG = -release
.ENDIF
-# we don't add LIBC here, the compiler does it based on -MD/-MT
-LIBFILES = $(CRYPT_LIB) oldnames.lib kernel32.lib user32.lib gdi32.lib \
+LIBBASEFILES = $(DELAYLOAD) $(CRYPT_LIB) \
+ oldnames.lib kernel32.lib user32.lib gdi32.lib \
winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib \
oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
version.lib odbc32.lib odbccp32.lib
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES = $(LIBBASEFILES) $(LIBC)
+
CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo $(LINK_DBG) -machine:$(PROCESSOR_ARCHITECTURE)
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) -machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG = -Fo
EXEOUT_FLAG = -Fe
LIBOUT_FLAG = /out:
.ENDIF
-.IF "$(OBJECT)" != ""
+.IF "$(USE_OBJECT)" == "define"
OPTIMIZE += $(CXX_FLAG)
+BUILDOPT += -DPERL_OBJECT
.ENDIF
-CFLAGS_O = $(CFLAGS) $(OBJECT)
+CFLAGS_O = $(CFLAGS) $(BUILDOPT)
#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
o *= .obj
+a *= .lib
LKPRE = INPUT (
LKPOST = )
# Rules
#
-.SUFFIXES : .c $(o) .dll .lib .exe .a
+.SUFFIXES : .c $(o) .dll $(a) .exe
.c$(o):
$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
$(IMPLIB) $(*B).lib $@
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -o $@ $(LINK_FLAGS) $< $(LIBFILES)
- $(IMPLIB) -def $(*B).def $(*B).lib $@
+ $(IMPLIB) -def $(*B).def $(*B).a $@
.ELSE
$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
-out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
.ENDIF
#
-INST_BIN = $(INST_TOP)$(INST_VER)\bin\$(ARCHNAME)
+INST_BIN = $(INST_TOP)$(INST_VER)\bin$(INST_ARCH)
INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
INST_LIB = $(INST_TOP)$(INST_VER)\lib
INST_POD = $(INST_LIB)\pod
#
# various targets
-.IF "$(OBJECT)" == "-DPERL_OBJECT"
-PERLIMPLIB = ..\perlcore.lib
-PERLDLL = ..\perlcore.dll
-CAPILIB = $(COREDIR)\PerlCAPI.lib
-.ELSE
-PERLIMPLIB = ..\perl.lib
-PERLDLL = ..\perl.dll
-CAPILIB =
-.ENDIF
-
MINIPERL = ..\miniperl.exe
MINIDIR = .\mini
PERLEXE = ..\perl.exe
PL2BAT = bin\pl2bat.pl
GLOBBAT = bin\perlglob.bat
+UTILS = \
+ ..\utils\h2ph \
+ ..\utils\splain \
+ ..\utils\dprofpp \
+ ..\utils\perlbug \
+ ..\utils\pl2pm \
+ ..\utils\c2ph \
+ ..\utils\h2xs \
+ ..\utils\perldoc \
+ ..\utils\pstruct \
+ ..\utils\perlcc \
+ ..\pod\checkpods \
+ ..\pod\pod2html \
+ ..\pod\pod2latex \
+ ..\pod\pod2man \
+ ..\pod\pod2text \
+ ..\pod\pod2usage \
+ ..\pod\podchecker \
+ ..\pod\podselect \
+ ..\x2p\find2perl \
+ ..\x2p\s2p \
+ bin\runperl.pl \
+ bin\pl2bat.pl \
+ bin\perlglob.pl \
+ bin\search.pl
+
.IF "$(CCTYPE)" == "BORLAND"
CFGSH_TMPL = config.bc
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
+.IF "$(USE_OBJECT)" == "define"
+PERLIMPLIB = ..\libperlcore$(a)
+.ELSE
+PERLIMPLIB = ..\libperl$(a)
+.ENDIF
.ELSE
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
+.IF "$(USE_PERLCRT)" == ""
PERL95EXE = ..\perl95.exe
+.ENDIF
.ENDIF
+.IF "$(USE_OBJECT)" == "define"
+PERLIMPLIB *= ..\perl56$(a)
+PERLDLL = ..\perl56.dll
+.ELSE
+PERLIMPLIB *= ..\perl$(a)
+PERLDLL = ..\perl.dll
+.ENDIF
+
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
NOOP = @echo
XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
-C++ -prototypes
-CORE_SRC = \
+MICROCORE_SRC = \
..\av.c \
- ..\byterun.c \
..\deb.c \
..\doio.c \
..\doop.c \
..\mg.c \
..\op.c \
..\perl.c \
+ ..\perlapi.c \
..\perly.c \
..\pp.c \
..\pp_ctl.c \
..\taint.c \
..\toke.c \
..\universal.c \
- ..\util.c
+ ..\utf8.c \
+ ..\util.c \
+ ..\xsutils.c
-.IF "$(CRYPT_SRC)" != ""
-CORE_SRC += ..\$(CRYPT_SRC)
-.ENDIF
+EXTRACORE_SRC += perllib.c
.IF "$(PERL_MALLOC)" == "define"
-CORE_SRC += ..\malloc.c
+EXTRACORE_SRC += ..\malloc.c
.ENDIF
-.IF "$(OBJECT)" == ""
-CORE_SRC += ..\perlio.c
+.IF "$(USE_OBJECT)" != "define"
+EXTRACORE_SRC += ..\perlio.c
.ENDIF
WIN32_SRC = \
WIN32_SRC += .\win32thread.c
.ENDIF
+.IF "$(CRYPT_SRC)" != ""
+WIN32_SRC += .\$(CRYPT_SRC)
+.ENDIF
+
PERL95_SRC = \
perl95.c \
win32mt.c \
win32sckmt.c
.IF "$(CRYPT_SRC)" != ""
-PERL95_SRC += ..\$(CRYPT_SRC)
+PERL95_SRC += .\$(CRYPT_SRC)
.ENDIF
DLL_SRC = $(DYNALOADER).c
-
-.IF "$(OBJECT)" == ""
-DLL_SRC += perllib.c
-.ENDIF
-
X2P_SRC = \
..\x2p\a2p.c \
..\x2p\hash.c \
..\x2p\util.c \
..\x2p\walk.c
-CORE_H = \
+CORE_NOCFG_H = \
..\av.h \
- ..\byterun.h \
- ..\bytecode.h \
..\cop.h \
..\cv.h \
..\dosish.h \
..\gv.h \
..\handy.h \
..\hv.h \
+ ..\iperlsys.h \
..\mg.h \
..\nostdio.h \
..\op.h \
..\opcode.h \
..\perl.h \
- ..\perlio.h \
+ ..\perlapi.h \
..\perlsdio.h \
..\perlsfio.h \
..\perly.h \
..\sv.h \
..\thread.h \
..\unixish.h \
+ ..\utf8.h \
..\util.h \
+ ..\warning.h \
..\XSUB.h \
- .\config.h \
..\EXTERN.h \
..\perlvars.h \
..\intrpvar.h \
.\include\sys\socket.h \
.\win32.h
-CORE_OBJ = $(CORE_SRC:db:+$(o))
+CORE_H = $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
WIN32_OBJ = $(WIN32_SRC:db:+$(o))
-MINICORE_OBJ = $(MINIDIR)\{$(CORE_OBJ:f) miniperlmain$(o)}
+MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
PERL95_OBJ = $(PERL95_SRC:db:+$(o))
DLL_OBJ = $(DLL_SRC:db:+$(o))
X2P_OBJ = $(X2P_SRC:db:+$(o))
-.IF "$(OBJECT)" != ""
-MINICORE_OBJ += $(MINIDIR)\perlio$(o)
-.ENDIF
-
PERLDLL_OBJ = $(CORE_OBJ)
PERLEXE_OBJ = perlmain$(o)
-.IF "$(OBJECT)" == ""
PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
-.ELSE
-PERLEXE_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
-PERL95_OBJ += DynaLoadmt$(o)
+
+.IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ = setargv$(o)
.ENDIF
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B
+DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
+ Data/Dumper Devel/Peek ByteLoader Devel/DProf
STATIC_EXT = DynaLoader
+NONXS_EXT = Errno
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
SOCKET = $(EXTDIR)\Socket\Socket
ATTRS = $(EXTDIR)\attrs\attrs
THREAD = $(EXTDIR)\Thread\Thread
B = $(EXTDIR)\B\B
+RE = $(EXTDIR)\re\re
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper
+ERRNO = $(EXTDIR)\Errno\Errno
+PEEK = $(EXTDIR)\Devel\Peek\Peek
+BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
+DPROF = $(EXTDIR)\Devel\DProf\DProf
SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
B_DLL = $(AUTODIR)\B\B.dll
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
+PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
+RE_DLL = $(AUTODIR)\re\re.dll
+BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
+DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
+
+ERRNO_PM = $(LIBDIR)\Errno.pm
EXTENSION_C = \
$(SOCKET).c \
$(POSIX).c \
$(ATTRS).c \
$(THREAD).c \
- $(B).c
+ $(RE).c \
+ $(DUMPER).c \
+ $(PEEK).c \
+ $(B).c \
+ $(BYTELOADER).c \
+ $(DPROF).c
EXTENSION_DLL = \
$(SOCKET_DLL) \
$(IO_DLL) \
$(POSIX_DLL) \
$(ATTRS_DLL) \
- $(B_DLL)
+ $(DUMPER_DLL) \
+ $(PEEK_DLL) \
+ $(B_DLL) \
+ $(RE_DLL) \
+ $(THREAD_DLL) \
+ $(BYTELOADER_DLL) \
+ $(DPROF_DLL)
-.IF "$(OBJECT)" == ""
-EXTENSION_DLL += \
- $(THREAD_DLL)
-.ENDIF
+EXTENSION_PM = \
+ $(ERRNO_PM)
POD2HTML = $(PODDIR)\pod2html
POD2MAN = $(PODDIR)\pod2man
"INST_DRV=$(INST_DRV)" \
"INST_TOP=$(INST_TOP)" \
"INST_VER=$(INST_VER)" \
+ "INST_ARCH=$(INST_ARCH)" \
"archname=$(ARCHNAME)" \
"cc=$(CC)" \
- "ccflags=$(OPTIMIZE) $(DEFINES) $(OBJECT)" \
+ "ccflags=$(OPTIMIZE:s/"/\"/) $(DEFINES) $(BUILDOPT)" \
"cf_email=$(EMAIL)" \
"d_crypt=$(D_CRYPT)" \
"d_mymalloc=$(PERL_MALLOC)" \
"libs=$(LIBFILES:f)" \
- "incpath=$(CCINCDIR)" \
- "libperl=$(PERLIMPLIB)" \
- "libpth=$(strip $(CCLIBDIR) $(LIBFILES:d))" \
+ "incpath=$(CCINCDIR:s/"/\"/)" \
+ "libperl=$(PERLIMPLIB:f)" \
+ "libpth=$(CCLIBDIR:s/"/\"/);$(EXTRALIBDIRS:s/"/\"/)" \
"libc=$(LIBC)" \
"make=dmake" \
+ "_o=$(o)" "obj_ext=$(o)" \
+ "_a=$(a)" "lib_ext=$(a)" \
"static_ext=$(STATIC_EXT)" \
"dynamic_ext=$(DYNAMIC_EXT)" \
+ "nonxs_ext=$(NONXS_EXT)" \
"usethreads=$(USE_THREADS)" \
- "LINK_FLAGS=$(LINK_FLAGS)" \
- "optimize=$(OPTIMIZE)"
+ "usemultiplicity=$(USE_MULTI)" \
+ "LINK_FLAGS=$(LINK_FLAGS:s/"/\"/)" \
+ "optimize=$(OPTIMIZE:s/"/\"/)"
#
# Top targets
#
-all : $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) $(PERL95EXE) $(CAPILIB) $(X2P) \
- $(EXTENSION_DLL)
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) $(PERL95EXE) \
+ $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
$(GLOBEXE) : perlglob$(o)
.IF "$(CCTYPE)" == "BORLAND"
- $(CC) -c -w -v -tWM -I$(CCINCDIR) perlglob.c
+ $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
$(LINK32) -Tpe -ap $(LINK_FLAGS) c0x32$(o) perlglob$(o) \
- $(CCLIBDIR)\32BIT\wildargs$(o),$@,,import32.lib cw32mt.lib,
+ "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) $(LINK_FLAGS) -o $@ perlglob$(o) $(LIBFILES)
.ELSE
config.w32 : $(CFGSH_TMPL)
copy $(CFGSH_TMPL) config.w32
-.\config.h : $(CFGH_TMPL)
+.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
-del /f config.h
copy $(CFGH_TMPL) config.h
-cd .. && del /f perl.exe
cd .. && perl configpm
-del /f $(CFGH_TMPL)
- -mkdir ..\lib\CORE
+ -mkdir $(COREDIR)
-perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(XCOPY) *.h $(COREDIR)\*.*
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
|| $(MAKE) $(MAKEMACROS) $(CONFIGPM)
$(MINIDIR) :
if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-$(MINICORE_OBJ) : $(CORE_H)
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ ..\$(*B).c
-$(MINIWIN32_OBJ) : $(CORE_H)
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+$(MINI_OBJ) : $(CORE_NOCFG_H)
+
$(WIN32_OBJ) : $(CORE_H)
$(CORE_OBJ) : $(CORE_H)
-$(MINI_OBJ) : $(CORE_H)
$(DLL_OBJ) : $(CORE_H)
$(PERL95_OBJ) : $(CORE_H)
$(X2P_OBJ) : $(CORE_H)
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym makedef.pl
- $(MINIPERL) -w makedef.pl $(OPTIMIZE) $(DEFINES) $(OBJECT) \
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
CCTYPE=$(CCTYPE) > perldll.def
$(PERLDLL): perldll.def $(PERLDLL_OBJ)
.ENDIF
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
-perl.def : $(MINIPERL) makeperldef.pl
- $(MINIPERL) -I..\lib makeperldef.pl $(NULL) > perl.def
-
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
$(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
.ELSE
$(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
- $(PERLEXE_OBJ) $(PERLIMPLIB)
+ $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB)
.ENDIF
copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
.IF "$(CCTYPE)" != "BORLAND"
.IF "$(CCTYPE)" != "GCC"
+.IF "$(USE_PERLCRT)" == ""
perl95.c : runperl.c
copy runperl.c perl95.c
$(PERL95EXE): $(PERLDLL) $(CONFIGPM) $(PERL95_OBJ)
$(LINK32) -subsystem:console -nodefaultlib -out:$@ $(LINK_FLAGS) \
- $(LIBFILES) $(PERL95_OBJ) $(PERLIMPLIB) libcmt.lib
+ $(LIBBASEFILES) $(PERL95_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) \
+ libcmt.lib
.ENDIF
.ENDIF
+.ENDIF
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
if not exist $(AUTODIR) mkdir $(AUTODIR)
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B).pm.PL
+ cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
$(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
-.IF "$(OBJECT)" == "-DPERL_OBJECT"
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
+ copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-PerlCAPI.cpp : $(MINIPERL)
- $(MINIPERL) GenCAPI.pl $(COREDIR)
+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
+ cd $(EXTDIR)\Data\$(*B) && \
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\Data\$(*B) && $(MAKE)
-PerlCAPI$(o) : PerlCAPI.cpp
-.IF "$(CCTYPE)" == "BORLAND"
- $(CC) $(CFLAGS_O) -c $(OBJOUT_FLAG)PerlCAPI$(o) PerlCAPI.cpp
-.ELIF "$(CCTYPE)" == "GCC"
- $(CC) $(CFLAGS_O) -c $(OBJOUT_FLAG)PerlCAPI$(o) PerlCAPI.cpp
-.ELSE
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
- $(OBJOUT_FLAG)PerlCAPI$(o) PerlCAPI.cpp
-.ENDIF
+$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
+ cd $(EXTDIR)\Devel\$(*B) && \
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-$(CAPILIB) : PerlCAPI.cpp PerlCAPI$(o)
-.IF "$(CCTYPE)" == "BORLAND"
- $(LIB32) $(LIBOUT_FLAG)$(CAPILIB) +PerlCAPI$(o)
-.ELSE
- $(LIB32) $(LIBOUT_FLAG)$(CAPILIB) PerlCAPI$(o)
-.ENDIF
+$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
+ cd $(EXTDIR)\Devel\$(*B) && \
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-.ENDIF
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+$(RE_DLL): $(PERLEXE) $(RE).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
$(B_DLL): $(PERLEXE) $(B).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
+$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
doc: $(PERLEXE)
- cd ..\pod && $(MAKE) -f ..\win32\pod.mak checkpods \
- pod2html pod2latex pod2man pod2text
- cd ..\pod && $(XCOPY) *.bat ..\win32\bin\*.*
- copy ..\README.win32 ..\pod\perlwin32.pod
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
--podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-utils: $(PERLEXE)
+utils: $(PERLEXE) $(X2P)
cd ..\utils && $(MAKE) PERL=$(MINIPERL)
- cd ..\utils && $(PERLEXE) ..\win32\$(PL2BAT) h2ph splain perlbug \
- pl2pm c2ph h2xs perldoc pstruct
- $(XCOPY) ..\utils\*.bat bin\*.*
- $(PERLEXE) -I..\lib $(PL2BAT) bin\network.pl bin\www.pl bin\runperl.pl \
- bin\pl2bat.pl bin\perlglob.pl
+ copy ..\README.win32 ..\pod\perlwin32.pod
+ cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
+ $(PERLEXE) $(PL2BAT) $(UTILS)
distclean: clean
-del /f $(MINIPERL) $(PERLEXE) $(PERL95EXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
+ $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
-del /f *.def *.map
- -del /f $(EXTENSION_DLL)
- -del /f $(EXTENSION_C) $(DYNALOADER).c
+ -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
+ -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+ -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
+ -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
-rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
-rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
+ -rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
-del /f $(PODDIR)\*.html
-del /f $(PODDIR)\*.bat
- -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc pstruct *.bat
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
+ dprofpp pstruct *.bat
-cd ..\x2p && del /f find2perl s2p *.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f perl95.c
.ENDIF
-del /f bin\*.bat
- -cd $(EXTDIR) && del /s *.lib *.def *.map *.bs Makefile *$(o) pm_to_blib
+ -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
+ pm_to_blib
-rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
-rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-install : all installbare installutils installhtml
+install : all installbare installhtml
-installbare :
+installbare : utils
$(PERLEXE) ..\installperl
.IF "$(PERL95EXE)" != ""
$(XCOPY) $(PERL95EXE) $(INST_BIN)\*.*
.ENDIF
-
-installutils : utils
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
- $(XCOPY) ..\pod\*.bat $(INST_SCRIPT)\*.*
installhtml : doc
$(RCOPY) html\*.* $(INST_HTML)\*.*
-@erase $(MINIPERL)
-@erase perlglob$(o)
-@erase perlmain$(o)
- -@erase PerlCAPI.cpp
-@erase config.w32
-@erase /f config.h
-@erase $(GLOBEXE)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
-@erase $(X2P_OBJ)
- -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp
+ -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
-@erase ..\x2p\*.exe ..\x2p\*.bat
-@erase *.ilk