#
# Makefile to build perl on Windows NT using DMAKE.
# Supported compilers:
-# Visual C++ 2.0 thro 6.0
+# Visual C++ 2.0 through 6.0 (and possibly newer versions)
# Borland C++ 5.02
# Mingw32 with gcc-2.95.2 or better **experimental**
+# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl57.dll). Also makes individual DLLs for the XS extensions.
+# (perl58.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-INST_VER *= \5.7.2
+INST_VER *= \5.7.3
#
# Comment this out if you DON'T want your perl installation to have
#
# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
+# emulation and for thread support.
#
USE_MULTI *= define
#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation. This needs
-# USE_MULTI as well.
+# Interpreter cloning/threads; now reasonably complete.
+# This should be enabled to get the fork() emulation.
+# This needs USE_MULTI above.
#
USE_ITHREADS *= define
#
# uncomment to enable the implicit "host" layer for all system calls
-# made by perl. This needs USE_MULTI above. This is also needed to
-# get fork().
+# made by perl. This needs USE_MULTI above.
+# This is also needed to get fork().
#
USE_IMP_SYS *= define
#
-# uncomment to enable the experimental PerlIO I/O subsystem.
+# Comment out next assign to disable perl's I/O subsystem and use compiler's
+# stdio for IO - depending on your compiler vendor and run time library you may
+# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
+# You will also be unable to take full advantage of perl5.8's support for multiple
+# encodings and may see lower IO performance. You have been warned.
USE_PERLIO = define
#
#USE_5005THREADS *= define
#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005. This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT *= define
-
-#
# uncomment exactly one of the following
#
# Visual C++ 2.x
#
# uncomment this if your Borland compiler is older than v5.4.
-BCCOLD = define
+#BCCOLD = define
#
# uncomment this if you want to use Borland's VCL as your CRT
#BCCVCL = define
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#
-CFG *= Debug
+#CFG *= Debug
#
# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
# It has patches that fix known bugs in older versions of MSVCRT.DLL.
# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
+# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
# and follow the directions in the package to install.
#
# Not recommended if you have VC 6.x and you're not running Windows 9x.
# so you may have to set CCHOME explicitly (spaces in the path name should
# not be quoted)
#
-#CCHOME *= F:\borland\bc5
+.IF "$(CCTYPE)" == "BORLAND"
+CCHOME *= C:\borland\bcc55
+.ELIF "$(CCTYPE)" == "GCC"
+CCHOME *= C:\MinGW
+.ELSE
CCHOME *= $(MSVCDIR)
-#CCHOME *= c:\gcc-2.95.2
+.ENDIF
CCINCDIR *= $(CCHOME)\include
CCLIBDIR *= $(CCHOME)\lib
CRYPT_FLAG = -DHAVE_DES_FCRYPT
.ENDIF
-.IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC != undef
-USE_5005THREADS != undef
-USE_MULTI != undef
-USE_IMP_SYS != define
-.ENDIF
-
PERL_MALLOC *= undef
USE_5005THREADS *= undef
.ENDIF
USE_MULTI *= undef
-USE_OBJECT *= undef
USE_ITHREADS *= undef
USE_IMP_SYS *= undef
USE_PERLIO *= undef
USE_PERLCRT *= undef
-.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
+.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
USE_MULTI != define
.ENDIF
-.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
+.IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
USE_MULTI != define
USE_5005THREADS != undef
.ENDIF
-.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
+.IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
BUILDOPT += -DPERL_IMPLICIT_CONTEXT
.ENDIF
BUILDOPT += -DPERL_IMPLICIT_SYS
.ENDIF
-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
PROCESSOR_ARCHITECTURE *= x86
-.IF "$(USE_OBJECT)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-.ELIF "$(USE_5005THREADS)" == "define"
+.IF "$(WIN64)" == ""
+.IF "$(PROCESSOR_ARCHITEW6432)" != ""
+PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
+WIN64 = define
+.ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
+WIN64 = define
+.ELSE
+WIN64 = undef
+.ENDIF
+.ENDIF
+
+.IF "$(USE_5005THREADS)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
.ELIF "$(USE_MULTI)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
# Options
#
INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
-#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
+#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
DEFINES = -DWIN32 $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
.IF "$(CFG)" == "Debug"
.IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
-LINK_DBG = -debug -pdb:none
.ELSE
-# -Zi requires .pdb file(s)
-#OPTIMIZE = -Od -MD -Zi -DDEBUGGING
-#LINK_DBG = -debug
-OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING
-LINK_DBG = -debug -debugtype:both -pdb:none
+OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
.ENDIF
+LINK_DBG = -debug
.ELSE
-.IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
+OPTIMIZE = -MD -DNDEBUG
+LINK_DBG = -release
+.IF "$(WIN64)" == "define"
+# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
+OPTIMIZE += -Ox -GL
+LINK_DBG += -ltcg
.ELSE
-OPTIMIZE = -Od -MD -DNDEBUG
+# -O1 yields smaller code, which turns out to be faster than -O2 on x86
+OPTIMIZE += -O1
+#OPTIMIZE += -O2
.ENDIF
-LINK_DBG = -release
+.ENDIF
+
+.IF "$(WIN64)" == "define"
+DEFINES += -DWIN64 -DCONSERVATIVE
+OPTIMIZE += -Wp64 -Op
+.ENDIF
+
+.IF "$(USE_PERLCRT)" != "define"
+BUILDOPT += -DPERL_MSVCRT_READFIX
.ENDIF
LIBBASEFILES = $(CRYPT_LIB) \
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
+ version.lib
+
+# win64 doesn't have some libs
+.IF "$(WIN64)" != "define"
+LIBBASEFILES += odbc32.lib odbccp32.lib
+.ENDIF
# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
EXEOUT_FLAG = -Fe
LIBOUT_FLAG = /out:
-.IF "$(USE_PERLCRT)" != "define"
-BUILDOPT += -DPERL_MSVCRT_READFIX
-.ENDIF
-
-.ENDIF
-
-.IF "$(USE_OBJECT)" == "define"
-OPTIMIZE += $(CXX_FLAG)
-BUILDOPT += -DPERL_OBJECT
.ENDIF
CFLAGS_O = $(CFLAGS) $(BUILDOPT)
..\utils\perlbug \
..\utils\pl2pm \
..\utils\c2ph \
+ ..\utils\pstruct \
..\utils\h2xs \
..\utils\perldoc \
..\utils\perlcc \
+ ..\utils\perlivp \
..\utils\libnetcfg \
+ ..\utils\enc2xs \
+ ..\utils\piconv \
..\pod\checkpods \
..\pod\pod2html \
..\pod\pod2latex \
..\pod\podchecker \
..\pod\podselect \
..\x2p\find2perl \
+ ..\x2p\psed \
..\x2p\s2p \
..\lib\ExtUtils\xsubpp \
bin\exetype.pl \
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
-PERLIMPLIB = ..\libperl57$(a)
+PERLIMPLIB = ..\libperl58$(a)
.ELSE
+.IF "$(WIN64)" == "define"
+CFGSH_TMPL = config.vc64
+CFGH_TMPL = config_H.vc64
+.ELSE
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
+.ENDIF
.ENDIF
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-# XXX so why did we change it from perl56 to perl57?
-PERLIMPLIB *= ..\perl57$(a)
-PERLDLL = ..\perl57.dll
+PERLIMPLIB *= ..\perl58$(a)
+PERLDLL = ..\perl58.dll
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
..\pp_ctl.c \
..\pp_hot.c \
..\pp_pack.c \
+ ..\pp_sort.c \
..\pp_sys.c \
+ ..\reentr.c \
..\regcomp.c \
..\regexec.c \
..\run.c \
EXTRACORE_SRC += ..\malloc.c
.ENDIF
-.IF "$(USE_OBJECT)" != "define"
EXTRACORE_SRC += ..\perlio.c
-.ENDIF
WIN32_SRC = \
.\win32.c \
- .\win32io.c \
.\win32sck.c \
.\win32thread.c
+# We need this for miniperl build unless we override canned
+# config.h #define building mini\*
+#.IF "$(USE_PERLIO)" == "define"
+WIN32_SRC += .\win32io.c
+#.ENDIF
+
.IF "$(CRYPT_SRC)" != ""
WIN32_SRC += .\$(CRYPT_SRC)
.ENDIF
DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
Sys/Hostname Storable Filter/Util/Call Encode \
- Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes Time/Piece
+ Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes \
+ Unicode/Normalize
STATIC_EXT = DynaLoader
NONXS_EXT = Errno
libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
libc=$(LIBC) ~ \
make=dmake ~ \
- _o=$(o) obj_ext=$(o) ~ \
- _a=$(a) lib_ext=$(a) ~ \
+ _o=$(o) ~ \
+ obj_ext=$(o) ~ \
+ _a=$(a) ~ \
+ lib_ext=$(a) ~ \
static_ext=$(STATIC_EXT) ~ \
use5005threads=$(USE_5005THREADS) ~ \
useithreads=$(USE_ITHREADS) ~ \
all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
$(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
- $(X2P) Extensions
+ $(X2P) Extensions
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
$(CFGSH_TMPL) > ..\config.sh
-cd .. && del /f perl.exe
+ -cd .. && del /f perl*.dll
cd .. && perl configpm
-del /f $(CFGH_TMPL)
-mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ -perl config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
-.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
+.IF "$(USE_IMP_SYS)" == "define"
$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
.ELSE
$(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
#----------------------------------------------------------------------------------
-Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
+Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
-Extensions_clean :
+Extensions_clean :
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
#----------------------------------------------------------------------------------
copy ..\README.apollo ..\pod\perlapollo.pod
copy ..\README.beos ..\pod\perlbeos.pod
copy ..\README.bs2000 ..\pod\perlbs2000.pod
+ copy ..\README.ce ..\pod\perlce.pod
copy ..\README.cygwin ..\pod\perlcygwin.pod
copy ..\README.dgux ..\pod\perldgux.pod
copy ..\README.dos ..\pod\perldos.pod
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-del /f $(LIBDIR)\XSLoader.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
-del /f $(LIBDIR)\Time\HiRes.pm
-del /f $(LIBDIR)\List\Util.pm
-del /f $(LIBDIR)\Scalar\Util.pm
- -del /f $(LIBDIR)\Time\Piece.pm
+ -del /f $(LIBDIR)\Unicode\Normalize.pm
-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
-if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
-cd $(PODDIR) && del /f *.html *.bat checkpods \
perlaix.pod perlamiga.pod perlapollo.pod \
- perlbeos.pod perlbs2000.pod perlcygwin.pod perldgux.pod \
+ perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \
perlmachten.pod perlmint.pod \
perlmacos.pod perlmpeix.pod perlnetware.pod \
perlvmesa.pod perlvms.pod perlvos.pod \
perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
- -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
- dprofpp *.bat
- -cd ..\x2p && del /f find2perl s2p *.bat
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
+ perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv *.bat
+ -cd ..\x2p && del /f find2perl s2p psed *.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
- -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
- pm_to_blib
+ -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
set HARNESS_PERL_SWITCHES=-C && \
cd ..\t && $(PERLEXE) -I..\lib harness
+_test : $(RIGHTMAKE)
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
+.ELSE
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+.ENDIF
+ cd ..\t && $(PERLEXE) -I..\lib harness
+
clean : Extensions_clean
-@erase miniperlmain$(o)
-@erase $(MINIPERL)
projects / p5sagit/p5-mst-13.2.git / blobdiff