/*
* This file was produced by running the config_h.SH script, which
- * gets its values from config.sh, which is generally produced by
+ * gets its values from undef, which is generally produced by
* running Configure.
*
* Feel free to modify any of this as the need arises. Note, however,
* that running config_h.SH again will wipe out any changes you've made.
- * For a more permanent change edit config.sh and rerun config_h.SH.
+ * For a more permanent change edit undef and rerun config_h.SH.
*
- * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
+ * $Id: Config_h.U 1 2006-08-24 12:32:52Z rmanfredi $
*/
/*
* Package name : perl5
* Source directory :
- * Configuration time: undef
- * Configured by : nick
+ * Configuration time: Fri Dec 12 15:41:26 2008
+ * Configured by : shay
* Target system :
*/
*/
#define LOC_SED "" /**/
-/* BIN:
- * This symbol holds the path of the bin directory where the package will
- * be installed. Program must be prepared to deal with ~name substitution.
- */
-/* BIN_EXP:
- * This symbol is the filename expanded version of the BIN symbol, for
- * programs that do not want to deal with that at run-time.
- */
-#define BIN "c:\\perl.gcc\\5.00467\\bin\\MSWin32-x86" /**/
-#define BIN_EXP "c:\\perl.gcc\\5.00467\\bin\\MSWin32-x86" /**/
-
-/* CPPSTDIN:
- * This symbol contains the first part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. Typical value of "cc -E" or "/lib/cpp", but it can also
- * call a wrapper. See CPPRUN.
- */
-/* CPPMINUS:
- * This symbol contains the second part of the string which will invoke
- * the C preprocessor on the standard input and produce to standard
- * output. This symbol will have the value "-" if CPPSTDIN needs a minus
- * to specify standard input, otherwise the value is "".
- */
-#define CPPSTDIN "gcc -E"
-#define CPPMINUS "-"
-
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
* available.
*/
-/*#define HAS_ALARM /**/
-
-/* HASATTRIBUTE:
- * This symbol indicates the C compiler can check for function attributes,
- * such as printf formats. This is normally only supported by GNU cc.
- */
-#define HASATTRIBUTE /**/
-#ifndef HASATTRIBUTE
-#define __attribute__(_arg_)
-#endif
+#define HAS_ALARM /**/
/* HAS_BCMP:
* This symbol is defined if the bcmp() routine is available to
*/
#define HAS_CHSIZE /**/
-/* HASCONST:
- * This symbol, if defined, indicates that this C compiler knows about
- * the const type. There is no need to actually test for that symbol
- * within your programs. The mere use of the "const" keyword will
- * trigger the necessary tests.
- */
-#define HASCONST /**/
-#ifndef HASCONST
-#define const
-#endif
-
/* HAS_CRYPT:
* This symbol, if defined, indicates that the crypt routine is available
* to encrypt passwords and the like.
*/
/*#define HAS_CRYPT /**/
+/* HAS_CTERMID:
+ * This symbol, if defined, indicates that the ctermid routine is
+ * available to generate filename for terminal.
+ */
+/*#define HAS_CTERMID /**/
+
/* HAS_CUSERID:
* This symbol, if defined, indicates that the cuserid routine is
* available to get character login names.
*/
#define HAS_FGETPOS /**/
-/* FLEXFILENAMES:
- * This symbol, if defined, indicates that the system supports filenames
- * longer than 14 characters.
- */
-#define FLEXFILENAMES /**/
-
/* HAS_FLOCK:
* This symbol, if defined, indicates that the flock routine is
* available to do file locking.
* <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
* The type "Timeval" should be used to refer to "struct timeval".
*/
-/*#define HAS_GETTIMEOFDAY /**/
+#define HAS_GETTIMEOFDAY /**/
#ifdef HAS_GETTIMEOFDAY
#define Timeval struct timeval /* Structure used by gettimeofday() */
#endif
*/
/*#define HAS_GETGROUPS /**/
-/* HAS_UNAME:
- * This symbol, if defined, indicates that the C program may use the
- * uname() routine to derive the host name. See also HAS_GETHOSTNAME
- * and PHOSTNAME.
- */
-/*#define HAS_UNAME /**/
-
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
* available to get the login name.
*/
/*#define HAS_GETPGID /**/
-/* HAS_GETPGRP:
- * This symbol, if defined, indicates that the getpgrp routine is
- * available to get the current process group.
- */
-/* USE_BSD_GETPGRP:
- * This symbol, if defined, indicates that getpgrp needs one
- * arguments whereas USG one needs none.
- */
-/*#define HAS_GETPGRP /**/
-/*#define USE_BSD_GETPGRP /**/
-
/* HAS_GETPGRP2:
* This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
* routine is available to get the current process group.
*/
/*#define HAS_GETPRIORITY /**/
-/* HAS_HTONL:
- * This symbol, if defined, indicates that the htonl() routine (and
- * friends htons() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_HTONS:
- * This symbol, if defined, indicates that the htons() routine (and
- * friends htonl() ntohl() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHL:
- * This symbol, if defined, indicates that the ntohl() routine (and
- * friends htonl() htons() ntohs()) are available to do network
- * order byte swapping.
- */
-/* HAS_NTOHS:
- * This symbol, if defined, indicates that the ntohs() routine (and
- * friends htonl() htons() ntohl()) are available to do network
- * order byte swapping.
- */
-#define HAS_HTONL /**/
-#define HAS_HTONS /**/
-#define HAS_NTOHL /**/
-#define HAS_NTOHS /**/
-
/* HAS_INET_ATON:
* This symbol, if defined, indicates to the C program that the
* inet_aton() function is available to parse IP address "dotted-quad"
* to kill process groups. If unavailable, you probably should use kill
* with a negative process number.
*/
-/*#define HAS_KILLPG /**/
+#define HAS_KILLPG /**/
/* HAS_LINK:
* This symbol, if defined, indicates that the link routine is
* available to create hard links.
*/
-/*#define HAS_LINK /**/
+#define HAS_LINK /**/
/* HAS_LOCALECONV:
* This symbol, if defined, indicates that the localeconv routine is
*/
#define HAS_MKTIME /**/
-/* HAS_MSG:
- * This symbol, if defined, indicates that the entire msg*(2) library is
- * supported (IPC mechanism based on message queues).
+/* HAS_MSYNC:
+ * This symbol, if defined, indicates that the msync system call is
+ * available to synchronize a mapped file.
*/
-/*#define HAS_MSG /**/
+/*#define HAS_MSYNC /**/
+
+/* HAS_MUNMAP:
+ * This symbol, if defined, indicates that the munmap system call is
+ * available to unmap a region, usually mapped by mmap().
+ */
+/*#define HAS_MUNMAP /**/
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
/* HAS_POLL:
* This symbol, if defined, indicates that the poll routine is
- * available to poll active file descriptors. You may safely
- * include <poll.h> when this symbol is defined.
+ * available to poll active file descriptors. Please check I_POLL and
+ * I_SYS_POLL to know which header should be included as well.
*/
/*#define HAS_POLL /**/
*/
#define HAS_SELECT /**/
-/* HAS_SEM:
- * This symbol, if defined, indicates that the entire sem*(2) library is
- * supported.
- */
-/*#define HAS_SEM /**/
-
/* HAS_SETEGID:
* This symbol, if defined, indicates that the setegid routine is available
* to change the effective gid of the current program.
*/
/*#define HAS_SETEUID /**/
+/* HAS_SETGROUPS:
+ * This symbol, if defined, indicates that the setgroups() routine is
+ * available to set the list of process groups. If unavailable, multiple
+ * groups are probably not supported.
+ */
+/*#define HAS_SETGROUPS /**/
+
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
*/
/*#define HAS_SETPGID /**/
-/* HAS_SETPGRP:
- * This symbol, if defined, indicates that the setpgrp routine is
- * available to set the current process group.
- */
-/* USE_BSD_SETPGRP:
- * This symbol, if defined, indicates that setpgrp needs two
- * arguments whereas USG one needs none. See also HAS_SETPGID
- * for a POSIX interface.
- */
-/*#define HAS_SETPGRP /**/
-/*#define USE_BSD_SETPGRP /**/
-
/* HAS_SETPGRP2:
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* routine is available to set the current process group.
*/
/*#define HAS_SETSID /**/
-/* HAS_SHM:
- * This symbol, if defined, indicates that the entire shm*(2) library is
- * supported.
- */
-/*#define HAS_SHM /**/
-
-/* Shmat_t:
- * This symbol holds the return type of the shmat() system call.
- * Usually set to 'void *' or 'char *'.
- */
-/* HAS_SHMAT_PROTOTYPE:
- * This symbol, if defined, indicates that the sys/shm.h includes
- * a prototype for shmat(). Otherwise, it is up to the program to
- * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess,
- * but not always right so it should be emitted by the program only
- * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
- */
-#define Shmat_t void * /**/
-/*#define HAS_SHMAT_PROTOTYPE /**/
-
-/* USE_STAT_BLOCKS:
- * This symbol is defined if this system has a stat structure declaring
- * st_blksize and st_blocks.
- */
-/*#define USE_STAT_BLOCKS /**/
-
/* HAS_STRCHR:
* This symbol is defined to indicate that the strchr()/strrchr()
* functions are available for string searching. If not, try the
*/
#define HAS_STRCOLL /**/
-/* USE_STRUCT_COPY:
- * This symbol, if defined, indicates that this C compiler knows how
- * to copy structures. If undefined, you'll need to use a block copy
- * routine of some sort instead.
- */
-#define USE_STRUCT_COPY /**/
-
-/* HAS_STRERROR:
- * This symbol, if defined, indicates that the strerror routine is
- * available to translate error numbers to strings. See the writeup
- * of Strerror() in this file before you try to define your own.
- */
-/* HAS_SYS_ERRLIST:
- * This symbol, if defined, indicates that the sys_errlist array is
- * available to translate error numbers to strings. The extern int
- * sys_nerr gives the size of that table.
- */
-/* Strerror:
- * This preprocessor symbol is defined as a macro if strerror() is
- * not available to translate error numbers to strings but sys_errlist[]
- * array is there.
- */
-#define HAS_STRERROR /**/
-#define HAS_SYS_ERRLIST /**/
-#define Strerror(e) strerror(e)
-
/* HAS_STRTOD:
* This symbol, if defined, indicates that the strtod routine is
* available to provide better numeric string conversion than atof().
*/
#define HAS_STRTOL /**/
-/* HAS_STRTOUL:
- * This symbol, if defined, indicates that the strtoul routine is
- * available to provide conversion of strings to unsigned long.
- */
-#define HAS_STRTOUL /**/
-
/* HAS_STRXFRM:
* This symbol, if defined, indicates that the strxfrm() routine is
* available to transform strings.
* This symbol, if defined, indicates that the tzname[] array is
* available to access timezone names.
*/
-/*#define HAS_TZNAME /**/
+#define HAS_TZNAME /**/
/* HAS_UMASK:
* This symbol, if defined, indicates that the umask routine is
*/
#define HAS_UMASK /**/
-/* HAS_VFORK:
- * This symbol, if defined, indicates that vfork() exists.
- */
-/*#define HAS_VFORK /**/
-
-/* HASVOLATILE:
- * This symbol, if defined, indicates that this C compiler knows about
- * the volatile declaration.
+/* HAS_USLEEP:
+ * This symbol, if defined, indicates that the usleep routine is
+ * available to let the process sleep on a sub-second accuracy.
*/
-#define HASVOLATILE /**/
-#ifndef HASVOLATILE
-#define volatile
-#endif
+/*#define HAS_USLEEP /**/
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
#define HAS_WCTOMB /**/
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups() and setgroups(). Usually, this is the same as
+ * gidtype (gid_t) , but sometimes it isn't.
+ * It can be int, ushort, gid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups() or setgroups()..
+ */
+#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
+#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
+#endif
+
+/* I_ARPA_INET:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <arpa/inet.h> to get inet_addr and friends declarations.
+ */
+#define I_ARPA_INET /**/
+
/* I_DBM:
* This symbol, if defined, indicates that <dbm.h> exists and should
* be included.
/*#define I_DBM /**/
#define I_RPCSVC_DBM /**/
-/* I_DIRENT:
- * This symbol, if defined, indicates to the C program that it should
- * include <dirent.h>. Using this symbol also triggers the definition
- * of the Direntry_t define which ends up being 'struct dirent' or
- * 'struct direct' depending on the availability of <dirent.h>.
- */
-/* DIRNAMLEN:
- * This symbol, if defined, indicates to the C program that the length
- * of directory entry names is provided by a d_namlen field. Otherwise
- * you need to do strlen() on the d_name field.
- */
-/* Direntry_t:
- * This symbol is set to 'struct direct' or 'struct dirent' depending on
- * whether dirent is available or not. You should use this pseudo type to
- * portably declare your directory entries.
- */
-#define I_DIRENT /**/
-#define DIRNAMLEN /**/
-#define Direntry_t struct direct
-
/* I_DLFCN:
* This symbol, if defined, indicates that <dlfcn.h> exists and should
* be included.
*/
#define I_FLOAT /**/
-/* I_GRP:
- * This symbol, if defined, indicates to the C program that it should
- * include <grp.h>.
+/* I_GDBM:
+ * This symbol, if defined, indicates that <gdbm.h> exists and should
+ * be included.
*/
-#define I_GRP /**/
+/*#define I_GDBM /**/
/* I_LIMITS:
* This symbol, if defined, indicates to the C program that it should
*/
/*#define I_MEMORY /**/
-/* I_NDBM:
- * This symbol, if defined, indicates that <ndbm.h> exists and should
- * be included.
- */
-/*#define I_NDBM /**/
-
-/* I_NET_ERRNO:
- * This symbol, if defined, indicates that <net/errno.h> exists and
- * should be included.
- */
-/*#define I_NET_ERRNO /**/
-
/* I_NETINET_IN:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
* This symbol, if defined, indicates that <sys/ioctl.h> exists and should
* be included. Otherwise, include <sgtty.h> or <termio.h>.
*/
+/* I_SYS_SOCKIO:
+ * This symbol, if defined, indicates the <sys/sockio.h> should be included
+ * to get socket ioctl options, like SIOCATMARK.
+ */
/*#define I_SYS_IOCTL /**/
+/*#define I_SYS_SOCKIO /**/
/* I_SYS_NDIR:
* This symbol, if defined, indicates to the C program that it should
*/
/*#define I_SYS_PARAM /**/
+/* I_SYS_POLL:
+ * This symbol, if defined, indicates that the program may include
+ * <sys/poll.h>. When I_POLL is also defined, it's probably safest
+ * to only include <poll.h>.
+ */
+/*#define I_SYS_POLL /**/
+
/* I_SYS_RESOURCE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/resource.h>.
*/
/*#define I_VALUES /**/
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
- */
-/* I_VARARGS:
- * This symbol, if defined, indicates to the C program that it should
- * include <varargs.h>.
- */
-#define I_STDARG /**/
-/*#define I_VARARGS /**/
-
/* I_VFORK:
* This symbol, if defined, indicates to the C program that it should
* include vfork.h.
*/
/*#define I_VFORK /**/
-/* Free_t:
- * This variable contains the return type of free(). It is usually
- * void, but occasionally int.
+/* INTSIZE:
+ * This symbol contains the value of sizeof(int) so that the C
+ * preprocessor can make decisions based on it.
*/
-/* Malloc_t:
- * This symbol is the type of pointer returned by malloc and realloc.
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
+
+/* MULTIARCH:
+ * This symbol, if defined, signifies that the build
+ * process will produce some binary files that are going to be
+ * used in a cross-platform environment. This is the case for
+ * example with the NeXT "fat" binaries that contain executables
+ * for several CPUs.
+ */
+/*#define MULTIARCH /**/
+
+/* HAS_QUAD:
+ * This symbol, if defined, tells that there's a 64-bit integer type,
+ * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
+ * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, QUAD_IS_INT64_T,
+ * or QUAD_IS___INT64.
+ */
+#define HAS_QUAD /**/
+#ifdef HAS_QUAD
+# ifndef _MSC_VER
+# define Quad_t long long /**/
+# define Uquad_t unsigned long long /**/
+# define QUADKIND 3 /**/
+# else
+# define Quad_t __int64 /**/
+# define Uquad_t unsigned __int64 /**/
+# define QUADKIND 5 /**/
+# endif
+# define QUAD_IS_INT 1
+# define QUAD_IS_LONG 2
+# define QUAD_IS_LONG_LONG 3
+# define QUAD_IS_INT64_T 4
+# define QUAD_IS___INT64 5
+#endif
+
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+/* OSVERS:
+ * This symbol contains the version of the operating system, as determined
+ * by Configure. You shouldn't rely on it too much; the specific
+ * feature tests from Configure are generally more reliable.
+ */
+#define OSNAME "MSWin32" /**/
+#define OSVERS "5.1" /**/
+
+/* ARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user wants to put architecture-dependent public
+ * library files for perl5. It is most often a local directory
+ * such as /usr/local/lib. Programs using this variable must be
+ * prepared to deal with filename expansion. If ARCHLIB is the
+ * same as PRIVLIB, it is not defined, since presumably the
+ * program already searches PRIVLIB.
+ */
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define ARCHLIB "c:\\perl\\lib" /**/
+/*#define ARCHLIB_EXP "" /**/
+
+/* ARCHNAME:
+ * This symbol holds a string representing the architecture name.
+ * It may be used to construct an architecture-dependant pathname
+ * where library files may be held under a private library, for
+ * instance.
+ */
+#define ARCHNAME "MSWin32-x86" /**/
+
+/* BIN:
+ * This symbol holds the path of the bin directory where the package will
+ * be installed. Program must be prepared to deal with ~name substitution.
+ */
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
+ */
+/* PERL_RELOCATABLE_INC:
+ * This symbol, if defined, indicates that we'd like to relocate entries
+ * in @INC at run time based on the location of the perl binary.
+ */
+#define BIN "c:\\perl\\bin" /**/
+#define BIN_EXP "c:\\perl\\bin" /**/
+#define PERL_RELOCATABLE_INC "undef" /**/
+
+/* CAT2:
+ * This macro concatenates 2 tokens together.
+ */
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
+ */
+#if 42 == 1
+#define CAT2(a,b) a/**/b
+#define STRINGIFY(a) "a"
+#endif
+#if 42 == 42
+#define PeRl_CaTiFy(a, b) a ## b
+#define PeRl_StGiFy(a) #a
+#define CAT2(a,b) PeRl_CaTiFy(a,b)
+#define StGiFy(a) PeRl_StGiFy(a)
+#define STRINGIFY(a) PeRl_StGiFy(a)
+#endif
+#if 42 != 1 && 42 != 42
+#include "Bletch: How does this C preprocessor concatenate tokens?"
+#endif
+
+/* CPPSTDIN:
+ * This symbol contains the first part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. Typical value of "cc -E" or "/lib/cpp", but it can also
+ * call a wrapper. See CPPRUN.
+ */
+/* CPPMINUS:
+ * This symbol contains the second part of the string which will invoke
+ * the C preprocessor on the standard input and produce to standard
+ * output. This symbol will have the value "-" if CPPSTDIN needs a minus
+ * to specify standard input, otherwise the value is "".
+ */
+/* CPPRUN:
+ * This symbol contains the string which will invoke a C preprocessor on
+ * the standard input and produce to standard output. It needs to end
+ * with CPPLAST, after all other preprocessor flags have been specified.
+ * The main difference with CPPSTDIN is that this program will never be a
+ * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is
+ * available directly to the user. Note that it may well be different from
+ * the preprocessor used to compile the C program.
+ */
+/* CPPLAST:
+ * This symbol is intended to be used along with CPPRUN in the same manner
+ * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
+ */
+#ifndef _MSC_VER
+# define CPPSTDIN "gcc -E"
+# define CPPMINUS "-"
+# define CPPRUN "gcc -E"
+#else
+# define CPPSTDIN "cppstdin"
+# define CPPMINUS ""
+# define CPPRUN "cl -nologo -E"
+#endif
+#define CPPLAST ""
+
+/* HAS_ACCESS:
+ * This manifest constant lets the C program know that the access()
+ * system call is available to check for accessibility using real UID/GID.
+ * (always present on UNIX.)
+ */
+#define HAS_ACCESS /**/
+
+/* HAS_ACCESSX:
+ * This symbol, if defined, indicates that the accessx routine is
+ * available to do extended access checks.
+ */
+/*#define HAS_ACCESSX /**/
+
+/* HAS_ASCTIME_R:
+ * This symbol, if defined, indicates that the asctime_r routine
+ * is available to asctime re-entrantly.
+ */
+/* ASCTIME_R_PROTO:
+ * This symbol encodes the prototype of asctime_r.
+ * It is zero if d_asctime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_asctime_r
+ * is defined.
+ */
+/*#define HAS_ASCTIME_R /**/
+#define ASCTIME_R_PROTO 0 /**/
+
+/* The HASATTRIBUTE_* defines are left undefined here because they vary from
+ * one version of GCC to another. Instead, they are defined on the basis of
+ * the compiler version in <perl.h>.
+ */
+/* HASATTRIBUTE_FORMAT:
+ * Can we handle GCC attribute for checking printf-style formats
+ */
+/* PRINTF_FORMAT_NULL_OK:
+ * Allows __printf__ format to be null when checking printf-style
+ */
+/* HASATTRIBUTE_MALLOC:
+ * Can we handle GCC attribute for malloc-style functions.
+ */
+/* HASATTRIBUTE_NONNULL:
+ * Can we handle GCC attribute for nonnull function parms.
+ */
+/* HASATTRIBUTE_NORETURN:
+ * Can we handle GCC attribute for functions that do not return
+ */
+/* HASATTRIBUTE_PURE:
+ * Can we handle GCC attribute for pure functions
+ */
+/* HASATTRIBUTE_UNUSED:
+ * Can we handle GCC attribute for unused variables and arguments
+ */
+/* HASATTRIBUTE_DEPRECATED:
+ * Can we handle GCC attribute for marking deprecated APIs
+ */
+/* HASATTRIBUTE_WARN_UNUSED_RESULT:
+ * Can we handle GCC attribute for warning on unused results
+ */
+/*#define HASATTRIBUTE_DEPRECATED /**/
+/*#define HASATTRIBUTE_FORMAT /**/
+/*#define PRINTF_FORMAT_NULL_OK /**/
+/*#define HASATTRIBUTE_NORETURN /**/
+/*#define HASATTRIBUTE_MALLOC /**/
+/*#define HASATTRIBUTE_NONNULL /**/
+/*#define HASATTRIBUTE_PURE /**/
+/*#define HASATTRIBUTE_UNUSED /**/
+/*#define HASATTRIBUTE_WARN_UNUSED_RESULT /**/
+
+/* HASCONST:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the const type. There is no need to actually test for that symbol
+ * within your programs. The mere use of the "const" keyword will
+ * trigger the necessary tests.
+ */
+#define HASCONST /**/
+#ifndef HASCONST
+#define const
+#endif
+
+/* HAS_CRYPT_R:
+ * This symbol, if defined, indicates that the crypt_r routine
+ * is available to crypt re-entrantly.
+ */
+/* CRYPT_R_PROTO:
+ * This symbol encodes the prototype of crypt_r.
+ * It is zero if d_crypt_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_crypt_r
+ * is defined.
+ */
+/*#define HAS_CRYPT_R /**/
+#define CRYPT_R_PROTO 0 /**/
+
+/* HAS_CSH:
+ * This symbol, if defined, indicates that the C-shell exists.
+ */
+/* CSH:
+ * This symbol, if defined, contains the full pathname of csh.
+ */
+/*#define HAS_CSH /**/
+#ifdef HAS_CSH
+#define CSH "" /**/
+#endif
+
+/* HAS_CTERMID_R:
+ * This symbol, if defined, indicates that the ctermid_r routine
+ * is available to ctermid re-entrantly.
+ */
+/* CTERMID_R_PROTO:
+ * This symbol encodes the prototype of ctermid_r.
+ * It is zero if d_ctermid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctermid_r
+ * is defined.
+ */
+/*#define HAS_CTERMID_R /**/
+#define CTERMID_R_PROTO 0 /**/
+
+/* HAS_CTIME_R:
+ * This symbol, if defined, indicates that the ctime_r routine
+ * is available to ctime re-entrantly.
+ */
+/* CTIME_R_PROTO:
+ * This symbol encodes the prototype of ctime_r.
+ * It is zero if d_ctime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ctime_r
+ * is defined.
+ */
+/*#define HAS_CTIME_R /**/
+#define CTIME_R_PROTO 0 /**/
+
+/* HAS_DRAND48_R:
+ * This symbol, if defined, indicates that the drand48_r routine
+ * is available to drand48 re-entrantly.
+ */
+/* DRAND48_R_PROTO:
+ * This symbol encodes the prototype of drand48_r.
+ * It is zero if d_drand48_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_drand48_r
+ * is defined.
+ */
+/*#define HAS_DRAND48_R /**/
+#define DRAND48_R_PROTO 0 /**/
+
+/* HAS_DRAND48_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the drand48() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern double drand48(void);
+ */
+/*#define HAS_DRAND48_PROTO /**/
+
+/* HAS_EACCESS:
+ * This symbol, if defined, indicates that the eaccess routine is
+ * available to do extended access checks.
+ */
+/*#define HAS_EACCESS /**/
+
+/* HAS_ENDGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the group database.
+ */
+/*#define HAS_ENDGRENT /**/
+
+/* HAS_ENDGRENT_R:
+ * This symbol, if defined, indicates that the endgrent_r routine
+ * is available to endgrent re-entrantly.
+ */
+/* ENDGRENT_R_PROTO:
+ * This symbol encodes the prototype of endgrent_r.
+ * It is zero if d_endgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endgrent_r
+ * is defined.
+ */
+/*#define HAS_ENDGRENT_R /**/
+#define ENDGRENT_R_PROTO 0 /**/
+
+/* HAS_ENDHOSTENT:
+ * This symbol, if defined, indicates that the endhostent() routine is
+ * available to close whatever was being used for host queries.
+ */
+/*#define HAS_ENDHOSTENT /**/
+
+/* HAS_ENDHOSTENT_R:
+ * This symbol, if defined, indicates that the endhostent_r routine
+ * is available to endhostent re-entrantly.
+ */
+/* ENDHOSTENT_R_PROTO:
+ * This symbol encodes the prototype of endhostent_r.
+ * It is zero if d_endhostent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endhostent_r
+ * is defined.
+ */
+/*#define HAS_ENDHOSTENT_R /**/
+#define ENDHOSTENT_R_PROTO 0 /**/
+
+/* HAS_ENDNETENT:
+ * This symbol, if defined, indicates that the endnetent() routine is
+ * available to close whatever was being used for network queries.
+ */
+/*#define HAS_ENDNETENT /**/
+
+/* HAS_ENDNETENT_R:
+ * This symbol, if defined, indicates that the endnetent_r routine
+ * is available to endnetent re-entrantly.
+ */
+/* ENDNETENT_R_PROTO:
+ * This symbol encodes the prototype of endnetent_r.
+ * It is zero if d_endnetent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endnetent_r
+ * is defined.
+ */
+/*#define HAS_ENDNETENT_R /**/
+#define ENDNETENT_R_PROTO 0 /**/
+
+/* HAS_ENDPROTOENT:
+ * This symbol, if defined, indicates that the endprotoent() routine is
+ * available to close whatever was being used for protocol queries.
+ */
+/*#define HAS_ENDPROTOENT /**/
+
+/* HAS_ENDPROTOENT_R:
+ * This symbol, if defined, indicates that the endprotoent_r routine
+ * is available to endprotoent re-entrantly.
+ */
+/* ENDPROTOENT_R_PROTO:
+ * This symbol encodes the prototype of endprotoent_r.
+ * It is zero if d_endprotoent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endprotoent_r
+ * is defined.
+ */
+/*#define HAS_ENDPROTOENT_R /**/
+#define ENDPROTOENT_R_PROTO 0 /**/
+
+/* HAS_ENDPWENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for finalizing sequential access of the passwd database.
+ */
+/*#define HAS_ENDPWENT /**/
+
+/* HAS_ENDPWENT_R:
+ * This symbol, if defined, indicates that the endpwent_r routine
+ * is available to endpwent re-entrantly.
+ */
+/* ENDPWENT_R_PROTO:
+ * This symbol encodes the prototype of endpwent_r.
+ * It is zero if d_endpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endpwent_r
+ * is defined.
+ */
+/*#define HAS_ENDPWENT_R /**/
+#define ENDPWENT_R_PROTO 0 /**/
+
+/* HAS_ENDSERVENT:
+ * This symbol, if defined, indicates that the endservent() routine is
+ * available to close whatever was being used for service queries.
+ */
+/*#define HAS_ENDSERVENT /**/
+
+/* HAS_ENDSERVENT_R:
+ * This symbol, if defined, indicates that the endservent_r routine
+ * is available to endservent re-entrantly.
+ */
+/* ENDSERVENT_R_PROTO:
+ * This symbol encodes the prototype of endservent_r.
+ * It is zero if d_endservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_endservent_r
+ * is defined.
+ */
+/*#define HAS_ENDSERVENT_R /**/
+#define ENDSERVENT_R_PROTO 0 /**/
+
+/* FLEXFILENAMES:
+ * This symbol, if defined, indicates that the system supports filenames
+ * longer than 14 characters.
+ */
+#define FLEXFILENAMES /**/
+
+/* HAS_GETGRENT:
+ * This symbol, if defined, indicates that the getgrent routine is
+ * available for sequential access of the group database.
+ */
+/*#define HAS_GETGRENT /**/
+
+/* HAS_GETGRENT_R:
+ * This symbol, if defined, indicates that the getgrent_r routine
+ * is available to getgrent re-entrantly.
+ */
+/* GETGRENT_R_PROTO:
+ * This symbol encodes the prototype of getgrent_r.
+ * It is zero if d_getgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrent_r
+ * is defined.
+ */
+/*#define HAS_GETGRENT_R /**/
+#define GETGRENT_R_PROTO 0 /**/
+
+/* HAS_GETGRGID_R:
+ * This symbol, if defined, indicates that the getgrgid_r routine
+ * is available to getgrgid re-entrantly.
+ */
+/* GETGRGID_R_PROTO:
+ * This symbol encodes the prototype of getgrgid_r.
+ * It is zero if d_getgrgid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrgid_r
+ * is defined.
+ */
+/*#define HAS_GETGRGID_R /**/
+#define GETGRGID_R_PROTO 0 /**/
+
+/* HAS_GETGRNAM_R:
+ * This symbol, if defined, indicates that the getgrnam_r routine
+ * is available to getgrnam re-entrantly.
+ */
+/* GETGRNAM_R_PROTO:
+ * This symbol encodes the prototype of getgrnam_r.
+ * It is zero if d_getgrnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getgrnam_r
+ * is defined.
+ */
+/*#define HAS_GETGRNAM_R /**/
+#define GETGRNAM_R_PROTO 0 /**/
+
+/* HAS_GETHOSTBYADDR:
+ * This symbol, if defined, indicates that the gethostbyaddr() routine is
+ * available to look up hosts by their IP addresses.
+ */
+#define HAS_GETHOSTBYADDR /**/
+
+/* HAS_GETHOSTBYNAME:
+ * This symbol, if defined, indicates that the gethostbyname() routine is
+ * available to look up host names in some data base or other.
+ */
+#define HAS_GETHOSTBYNAME /**/
+
+/* HAS_GETHOSTENT:
+ * This symbol, if defined, indicates that the gethostent() routine is
+ * available to look up host names in some data base or another.
+ */
+/*#define HAS_GETHOSTENT /**/
+
+/* HAS_GETHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * gethostname() routine to derive the host name. See also HAS_UNAME
+ * and PHOSTNAME.
+ */
+/* HAS_UNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * uname() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and PHOSTNAME.
+ */
+/* PHOSTNAME:
+ * This symbol, if defined, indicates the command to feed to the
+ * popen() routine to derive the host name. See also HAS_GETHOSTNAME
+ * and HAS_UNAME. Note that the command uses a fully qualified path,
+ * so that it is safe even if used by a process with super-user
+ * privileges.
+ */
+/* HAS_PHOSTNAME:
+ * This symbol, if defined, indicates that the C program may use the
+ * contents of PHOSTNAME as a command to feed to the popen() routine
+ * to derive the host name.
+ */
+#define HAS_GETHOSTNAME /**/
+#define HAS_UNAME /**/
+/*#define HAS_PHOSTNAME /**/
+#ifdef HAS_PHOSTNAME
+#define PHOSTNAME "" /* How to get the host name */
+#endif
+
+/* HAS_GETHOSTBYADDR_R:
+ * This symbol, if defined, indicates that the gethostbyaddr_r routine
+ * is available to gethostbyaddr re-entrantly.
+ */
+/* GETHOSTBYADDR_R_PROTO:
+ * This symbol encodes the prototype of gethostbyaddr_r.
+ * It is zero if d_gethostbyaddr_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyaddr_r
+ * is defined.
+ */
+/*#define HAS_GETHOSTBYADDR_R /**/
+#define GETHOSTBYADDR_R_PROTO 0 /**/
+
+/* HAS_GETHOSTBYNAME_R:
+ * This symbol, if defined, indicates that the gethostbyname_r routine
+ * is available to gethostbyname re-entrantly.
+ */
+/* GETHOSTBYNAME_R_PROTO:
+ * This symbol encodes the prototype of gethostbyname_r.
+ * It is zero if d_gethostbyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostbyname_r
+ * is defined.
+ */
+/*#define HAS_GETHOSTBYNAME_R /**/
+#define GETHOSTBYNAME_R_PROTO 0 /**/
+
+/* HAS_GETHOSTENT_R:
+ * This symbol, if defined, indicates that the gethostent_r routine
+ * is available to gethostent re-entrantly.
+ */
+/* GETHOSTENT_R_PROTO:
+ * This symbol encodes the prototype of gethostent_r.
+ * It is zero if d_gethostent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gethostent_r
+ * is defined.
+ */
+/*#define HAS_GETHOSTENT_R /**/
+#define GETHOSTENT_R_PROTO 0 /**/
+
+/* HAS_GETHOST_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for gethostent(), gethostbyname(), and
+ * gethostbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define HAS_GETHOST_PROTOS /**/
+
+/* HAS_GETLOGIN_R:
+ * This symbol, if defined, indicates that the getlogin_r routine
+ * is available to getlogin re-entrantly.
+ */
+/* GETLOGIN_R_PROTO:
+ * This symbol encodes the prototype of getlogin_r.
+ * It is zero if d_getlogin_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getlogin_r
+ * is defined.
+ */
+/*#define HAS_GETLOGIN_R /**/
+#define GETLOGIN_R_PROTO 0 /**/
+
+/* HAS_GETNETBYADDR:
+ * This symbol, if defined, indicates that the getnetbyaddr() routine is
+ * available to look up networks by their IP addresses.
+ */
+/*#define HAS_GETNETBYADDR /**/
+
+/* HAS_GETNETBYNAME:
+ * This symbol, if defined, indicates that the getnetbyname() routine is
+ * available to look up networks by their names.
+ */
+/*#define HAS_GETNETBYNAME /**/
+
+/* HAS_GETNETENT:
+ * This symbol, if defined, indicates that the getnetent() routine is
+ * available to look up network names in some data base or another.
+ */
+/*#define HAS_GETNETENT /**/
+
+/* HAS_GETNETBYADDR_R:
+ * This symbol, if defined, indicates that the getnetbyaddr_r routine
+ * is available to getnetbyaddr re-entrantly.
+ */
+/* GETNETBYADDR_R_PROTO:
+ * This symbol encodes the prototype of getnetbyaddr_r.
+ * It is zero if d_getnetbyaddr_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyaddr_r
+ * is defined.
+ */
+/*#define HAS_GETNETBYADDR_R /**/
+#define GETNETBYADDR_R_PROTO 0 /**/
+
+/* HAS_GETNETBYNAME_R:
+ * This symbol, if defined, indicates that the getnetbyname_r routine
+ * is available to getnetbyname re-entrantly.
+ */
+/* GETNETBYNAME_R_PROTO:
+ * This symbol encodes the prototype of getnetbyname_r.
+ * It is zero if d_getnetbyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetbyname_r
+ * is defined.
+ */
+/*#define HAS_GETNETBYNAME_R /**/
+#define GETNETBYNAME_R_PROTO 0 /**/
+
+/* HAS_GETNETENT_R:
+ * This symbol, if defined, indicates that the getnetent_r routine
+ * is available to getnetent re-entrantly.
+ */
+/* GETNETENT_R_PROTO:
+ * This symbol encodes the prototype of getnetent_r.
+ * It is zero if d_getnetent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getnetent_r
+ * is defined.
+ */
+/*#define HAS_GETNETENT_R /**/
+#define GETNETENT_R_PROTO 0 /**/
+
+/* HAS_GETNET_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getnetent(), getnetbyname(), and
+ * getnetbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+/*#define HAS_GETNET_PROTOS /**/
+
+/* HAS_GETPROTOENT:
+ * This symbol, if defined, indicates that the getprotoent() routine is
+ * available to look up protocols in some data base or another.
+ */
+/*#define HAS_GETPROTOENT /**/
+
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
+ */
+/* USE_BSD_GETPGRP:
+ * This symbol, if defined, indicates that getpgrp needs one
+ * arguments whereas USG one needs none.
+ */
+/*#define HAS_GETPGRP /**/
+/*#define USE_BSD_GETPGRP /**/
+
+/* HAS_GETPROTOBYNAME:
+ * This symbol, if defined, indicates that the getprotobyname()
+ * routine is available to look up protocols by their name.
+ */
+/* HAS_GETPROTOBYNUMBER:
+ * This symbol, if defined, indicates that the getprotobynumber()
+ * routine is available to look up protocols by their number.
+ */
+#define HAS_GETPROTOBYNAME /**/
+#define HAS_GETPROTOBYNUMBER /**/
+
+/* HAS_GETPROTOBYNAME_R:
+ * This symbol, if defined, indicates that the getprotobyname_r routine
+ * is available to getprotobyname re-entrantly.
+ */
+/* GETPROTOBYNAME_R_PROTO:
+ * This symbol encodes the prototype of getprotobyname_r.
+ * It is zero if d_getprotobyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobyname_r
+ * is defined.
+ */
+/*#define HAS_GETPROTOBYNAME_R /**/
+#define GETPROTOBYNAME_R_PROTO 0 /**/
+
+/* HAS_GETPROTOBYNUMBER_R:
+ * This symbol, if defined, indicates that the getprotobynumber_r routine
+ * is available to getprotobynumber re-entrantly.
+ */
+/* GETPROTOBYNUMBER_R_PROTO:
+ * This symbol encodes the prototype of getprotobynumber_r.
+ * It is zero if d_getprotobynumber_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotobynumber_r
+ * is defined.
+ */
+/*#define HAS_GETPROTOBYNUMBER_R /**/
+#define GETPROTOBYNUMBER_R_PROTO 0 /**/
+
+/* HAS_GETPROTOENT_R:
+ * This symbol, if defined, indicates that the getprotoent_r routine
+ * is available to getprotoent re-entrantly.
+ */
+/* GETPROTOENT_R_PROTO:
+ * This symbol encodes the prototype of getprotoent_r.
+ * It is zero if d_getprotoent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getprotoent_r
+ * is defined.
+ */
+/*#define HAS_GETPROTOENT_R /**/
+#define GETPROTOENT_R_PROTO 0 /**/
+
+/* HAS_GETPROTO_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getprotoent(), getprotobyname(), and
+ * getprotobyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define HAS_GETPROTO_PROTOS /**/
+
+/* HAS_GETPWENT:
+ * This symbol, if defined, indicates that the getpwent routine is
+ * available for sequential access of the passwd database.
+ * If this is not available, the older getpw() function may be available.
+ */
+/*#define HAS_GETPWENT /**/
+
+/* HAS_GETPWENT_R:
+ * This symbol, if defined, indicates that the getpwent_r routine
+ * is available to getpwent re-entrantly.
+ */
+/* GETPWENT_R_PROTO:
+ * This symbol encodes the prototype of getpwent_r.
+ * It is zero if d_getpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwent_r
+ * is defined.
+ */
+/*#define HAS_GETPWENT_R /**/
+#define GETPWENT_R_PROTO 0 /**/
+
+/* HAS_GETPWNAM_R:
+ * This symbol, if defined, indicates that the getpwnam_r routine
+ * is available to getpwnam re-entrantly.
+ */
+/* GETPWNAM_R_PROTO:
+ * This symbol encodes the prototype of getpwnam_r.
+ * It is zero if d_getpwnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwnam_r
+ * is defined.
+ */
+/*#define HAS_GETPWNAM_R /**/
+#define GETPWNAM_R_PROTO 0 /**/
+
+/* HAS_GETPWUID_R:
+ * This symbol, if defined, indicates that the getpwuid_r routine
+ * is available to getpwuid re-entrantly.
+ */
+/* GETPWUID_R_PROTO:
+ * This symbol encodes the prototype of getpwuid_r.
+ * It is zero if d_getpwuid_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getpwuid_r
+ * is defined.
+ */
+/*#define HAS_GETPWUID_R /**/
+#define GETPWUID_R_PROTO 0 /**/
+
+/* HAS_GETSERVENT:
+ * This symbol, if defined, indicates that the getservent() routine is
+ * available to look up network services in some data base or another.
+ */
+/*#define HAS_GETSERVENT /**/
+
+/* HAS_GETSERVBYNAME_R:
+ * This symbol, if defined, indicates that the getservbyname_r routine
+ * is available to getservbyname re-entrantly.
+ */
+/* GETSERVBYNAME_R_PROTO:
+ * This symbol encodes the prototype of getservbyname_r.
+ * It is zero if d_getservbyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyname_r
+ * is defined.
+ */
+/*#define HAS_GETSERVBYNAME_R /**/
+#define GETSERVBYNAME_R_PROTO 0 /**/
+
+/* HAS_GETSERVBYPORT_R:
+ * This symbol, if defined, indicates that the getservbyport_r routine
+ * is available to getservbyport re-entrantly.
+ */
+/* GETSERVBYPORT_R_PROTO:
+ * This symbol encodes the prototype of getservbyport_r.
+ * It is zero if d_getservbyport_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservbyport_r
+ * is defined.
+ */
+/*#define HAS_GETSERVBYPORT_R /**/
+#define GETSERVBYPORT_R_PROTO 0 /**/
+
+/* HAS_GETSERVENT_R:
+ * This symbol, if defined, indicates that the getservent_r routine
+ * is available to getservent re-entrantly.
+ */
+/* GETSERVENT_R_PROTO:
+ * This symbol encodes the prototype of getservent_r.
+ * It is zero if d_getservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getservent_r
+ * is defined.
+ */
+/*#define HAS_GETSERVENT_R /**/
+#define GETSERVENT_R_PROTO 0 /**/
+
+/* HAS_GETSERV_PROTOS:
+ * This symbol, if defined, indicates that <netdb.h> includes
+ * prototypes for getservent(), getservbyname(), and
+ * getservbyaddr(). Otherwise, it is up to the program to guess
+ * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+ */
+#define HAS_GETSERV_PROTOS /**/
+
+/* HAS_GETSPNAM_R:
+ * This symbol, if defined, indicates that the getspnam_r routine
+ * is available to getspnam re-entrantly.
+ */
+/* GETSPNAM_R_PROTO:
+ * This symbol encodes the prototype of getspnam_r.
+ * It is zero if d_getspnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_getspnam_r
+ * is defined.
+ */
+/*#define HAS_GETSPNAM_R /**/
+#define GETSPNAM_R_PROTO 0 /**/
+
+/* HAS_GETSERVBYNAME:
+ * This symbol, if defined, indicates that the getservbyname()
+ * routine is available to look up services by their name.
+ */
+/* HAS_GETSERVBYPORT:
+ * This symbol, if defined, indicates that the getservbyport()
+ * routine is available to look up services by their port.
+ */
+#define HAS_GETSERVBYNAME /**/
+#define HAS_GETSERVBYPORT /**/
+
+/* HAS_GMTIME_R:
+ * This symbol, if defined, indicates that the gmtime_r routine
+ * is available to gmtime re-entrantly.
+ */
+/* GMTIME_R_PROTO:
+ * This symbol encodes the prototype of gmtime_r.
+ * It is zero if d_gmtime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_gmtime_r
+ * is defined.
+ */
+/*#define HAS_GMTIME_R /**/
+#define GMTIME_R_PROTO 0 /**/
+
+/* HAS_HTONL:
+ * This symbol, if defined, indicates that the htonl() routine (and
+ * friends htons() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_HTONS:
+ * This symbol, if defined, indicates that the htons() routine (and
+ * friends htonl() ntohl() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHL:
+ * This symbol, if defined, indicates that the ntohl() routine (and
+ * friends htonl() htons() ntohs()) are available to do network
+ * order byte swapping.
+ */
+/* HAS_NTOHS:
+ * This symbol, if defined, indicates that the ntohs() routine (and
+ * friends htonl() htons() ntohl()) are available to do network
+ * order byte swapping.
+ */
+#define HAS_HTONL /**/
+#define HAS_HTONS /**/
+#define HAS_NTOHL /**/
+#define HAS_NTOHS /**/
+
+/* HAS_LOCALTIME_R:
+ * This symbol, if defined, indicates that the localtime_r routine
+ * is available to localtime re-entrantly.
+ */
+/* LOCALTIME_R_NEEDS_TZSET:
+ * Many libc's localtime_r implementations do not call tzset,
+ * making them differ from localtime(), and making timezone
+ * changes using \undef{TZ} without explicitly calling tzset
+ * impossible. This symbol makes us call tzset before localtime_r
+ */
+/*#define LOCALTIME_R_NEEDS_TZSET /**/
+#ifdef LOCALTIME_R_NEEDS_TZSET
+#define L_R_TZSET tzset(),
+#else
+#define L_R_TZSET
+#endif
+
+/* LOCALTIME_R_PROTO:
+ * This symbol encodes the prototype of localtime_r.
+ * It is zero if d_localtime_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_localtime_r
+ * is defined.
+ */
+/*#define HAS_LOCALTIME_R /**/
+#define LOCALTIME_R_PROTO 0 /**/
+
+/* HAS_LONG_DOUBLE:
+ * This symbol will be defined if the C compiler supports long
+ * doubles.
+ */
+/* LONG_DOUBLESIZE:
+ * This symbol contains the size of a long double, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long doubles.
+ */
+#define HAS_LONG_DOUBLE /**/
+#ifdef HAS_LONG_DOUBLE
+# ifndef _MSC_VER
+# define LONG_DOUBLESIZE 12 /**/
+# else
+# define LONG_DOUBLESIZE 8 /**/
+# endif
+#endif
+
+/* HAS_LONG_LONG:
+ * This symbol will be defined if the C compiler supports long long.
+ */
+/* LONGLONGSIZE:
+ * This symbol contains the size of a long long, so that the
+ * C preprocessor can make decisions based on it. It is only
+ * defined if the system supports long long.
+ */
+/*#define HAS_LONG_LONG /**/
+#ifdef HAS_LONG_LONG
+#define LONGLONGSIZE 8 /**/
+#endif
+
+/* HAS_LSEEK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the lseek() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern off_t lseek(int, off_t, int);
+ */
+#define HAS_LSEEK_PROTO /**/
+
+/* HAS_MEMCHR:
+ * This symbol, if defined, indicates that the memchr routine is available
+ * to locate characters within a C string.
+ */
+#define HAS_MEMCHR /**/
+
+/* HAS_MKSTEMP:
+ * This symbol, if defined, indicates that the mkstemp routine is
+ * available to exclusively create and open a uniquely named
+ * temporary file.
+ */
+/*#define HAS_MKSTEMP /**/
+
+/* HAS_MMAP:
+ * This symbol, if defined, indicates that the mmap system call is
+ * available to map a file into memory.
+ */
+/* Mmap_t:
+ * This symbol holds the return type of the mmap() system call
+ * (and simultaneously the type of the first argument).
+ * Usually set to 'void *' or 'caddr_t'.
+ */
+/*#define HAS_MMAP /**/
+#define Mmap_t void * /**/
+
+/* HAS_MSG:
+ * This symbol, if defined, indicates that the entire msg*(2) library is
+ * supported (IPC mechanism based on message queues).
+ */
+/*#define HAS_MSG /**/
+
+/* OLD_PTHREAD_CREATE_JOINABLE:
+ * This symbol, if defined, indicates how to create pthread
+ * in joinable (aka undetached) state. NOTE: not defined
+ * if pthread.h already has defined PTHREAD_CREATE_JOINABLE
+ * (the new version of the constant).
+ * If defined, known values are PTHREAD_CREATE_UNDETACHED
+ * and __UNDETACHED.
+ */
+/*#define OLD_PTHREAD_CREATE_JOINABLE /**/
+
+/* HAS_PTHREAD_ATFORK:
+ * This symbol, if defined, indicates that the pthread_atfork routine
+ * is available to setup fork handlers.
+ */
+/*#define HAS_PTHREAD_ATFORK /**/
+
+/* HAS_PTHREAD_YIELD:
+ * This symbol, if defined, indicates that the pthread_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/* SCHED_YIELD:
+ * This symbol defines the way to yield the execution of
+ * the current thread. Known ways are sched_yield,
+ * pthread_yield, and pthread_yield with NULL.
+ */
+/* HAS_SCHED_YIELD:
+ * This symbol, if defined, indicates that the sched_yield
+ * routine is available to yield the execution of the current
+ * thread. sched_yield is preferable to pthread_yield.
+ */
+/*#define HAS_PTHREAD_YIELD /**/
+#define SCHED_YIELD /**/
+/*#define HAS_SCHED_YIELD /**/
+
+/* HAS_RANDOM_R:
+ * This symbol, if defined, indicates that the random_r routine
+ * is available to random re-entrantly.
+ */
+/* RANDOM_R_PROTO:
+ * This symbol encodes the prototype of random_r.
+ * It is zero if d_random_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_random_r
+ * is defined.
+ */
+/*#define HAS_RANDOM_R /**/
+#define RANDOM_R_PROTO 0 /**/
+
+/* HAS_READDIR64_R:
+ * This symbol, if defined, indicates that the readdir64_r routine
+ * is available to readdir64 re-entrantly.
+ */
+/* READDIR64_R_PROTO:
+ * This symbol encodes the prototype of readdir64_r.
+ * It is zero if d_readdir64_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir64_r
+ * is defined.
+ */
+/*#define HAS_READDIR64_R /**/
+#define READDIR64_R_PROTO 0 /**/
+
+/* HAS_READDIR_R:
+ * This symbol, if defined, indicates that the readdir_r routine
+ * is available to readdir re-entrantly.
+ */
+/* READDIR_R_PROTO:
+ * This symbol encodes the prototype of readdir_r.
+ * It is zero if d_readdir_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_readdir_r
+ * is defined.
+ */
+/*#define HAS_READDIR_R /**/
+#define READDIR_R_PROTO 0 /**/
+
+/* HAS_SEM:
+ * This symbol, if defined, indicates that the entire sem*(2) library is
+ * supported.
+ */
+/*#define HAS_SEM /**/
+
+/* HAS_SETGRENT:
+ * This symbol, if defined, indicates that the setgrent routine is
+ * available for initializing sequential access of the group database.
+ */
+/*#define HAS_SETGRENT /**/
+
+/* HAS_SETGRENT_R:
+ * This symbol, if defined, indicates that the setgrent_r routine
+ * is available to setgrent re-entrantly.
+ */
+/* SETGRENT_R_PROTO:
+ * This symbol encodes the prototype of setgrent_r.
+ * It is zero if d_setgrent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setgrent_r
+ * is defined.
+ */
+/*#define HAS_SETGRENT_R /**/
+#define SETGRENT_R_PROTO 0 /**/
+
+/* HAS_SETHOSTENT:
+ * This symbol, if defined, indicates that the sethostent() routine is
+ * available.
+ */
+/*#define HAS_SETHOSTENT /**/
+
+/* HAS_SETHOSTENT_R:
+ * This symbol, if defined, indicates that the sethostent_r routine
+ * is available to sethostent re-entrantly.
+ */
+/* SETHOSTENT_R_PROTO:
+ * This symbol encodes the prototype of sethostent_r.
+ * It is zero if d_sethostent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_sethostent_r
+ * is defined.
+ */
+/*#define HAS_SETHOSTENT_R /**/
+#define SETHOSTENT_R_PROTO 0 /**/
+
+/* HAS_SETLOCALE_R:
+ * This symbol, if defined, indicates that the setlocale_r routine
+ * is available to setlocale re-entrantly.
+ */
+/* SETLOCALE_R_PROTO:
+ * This symbol encodes the prototype of setlocale_r.
+ * It is zero if d_setlocale_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setlocale_r
+ * is defined.
+ */
+/*#define HAS_SETLOCALE_R /**/
+#define SETLOCALE_R_PROTO 0 /**/
+
+/* HAS_SETNETENT:
+ * This symbol, if defined, indicates that the setnetent() routine is
+ * available.
+ */
+/*#define HAS_SETNETENT /**/
+
+/* HAS_SETNETENT_R:
+ * This symbol, if defined, indicates that the setnetent_r routine
+ * is available to setnetent re-entrantly.
+ */
+/* SETNETENT_R_PROTO:
+ * This symbol encodes the prototype of setnetent_r.
+ * It is zero if d_setnetent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setnetent_r
+ * is defined.
+ */
+/*#define HAS_SETNETENT_R /**/
+#define SETNETENT_R_PROTO 0 /**/
+
+/* HAS_SETPROTOENT:
+ * This symbol, if defined, indicates that the setprotoent() routine is
+ * available.
+ */
+/*#define HAS_SETPROTOENT /**/
+
+/* HAS_SETPGRP:
+ * This symbol, if defined, indicates that the setpgrp routine is
+ * available to set the current process group.
+ */
+/* USE_BSD_SETPGRP:
+ * This symbol, if defined, indicates that setpgrp needs two
+ * arguments whereas USG one needs none. See also HAS_SETPGID
+ * for a POSIX interface.
+ */
+/*#define HAS_SETPGRP /**/
+/*#define USE_BSD_SETPGRP /**/
+
+/* HAS_SETPROTOENT_R:
+ * This symbol, if defined, indicates that the setprotoent_r routine
+ * is available to setprotoent re-entrantly.
+ */
+/* SETPROTOENT_R_PROTO:
+ * This symbol encodes the prototype of setprotoent_r.
+ * It is zero if d_setprotoent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setprotoent_r
+ * is defined.
+ */
+/*#define HAS_SETPROTOENT_R /**/
+#define SETPROTOENT_R_PROTO 0 /**/
+
+/* HAS_SETPWENT:
+ * This symbol, if defined, indicates that the setpwent routine is
+ * available for initializing sequential access of the passwd database.
+ */
+/*#define HAS_SETPWENT /**/
+
+/* HAS_SETPWENT_R:
+ * This symbol, if defined, indicates that the setpwent_r routine
+ * is available to setpwent re-entrantly.
+ */
+/* SETPWENT_R_PROTO:
+ * This symbol encodes the prototype of setpwent_r.
+ * It is zero if d_setpwent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setpwent_r
+ * is defined.
+ */
+/*#define HAS_SETPWENT_R /**/
+#define SETPWENT_R_PROTO 0 /**/
+
+/* HAS_SETSERVENT:
+ * This symbol, if defined, indicates that the setservent() routine is
+ * available.
+ */
+/*#define HAS_SETSERVENT /**/
+
+/* HAS_SETSERVENT_R:
+ * This symbol, if defined, indicates that the setservent_r routine
+ * is available to setservent re-entrantly.
+ */
+/* SETSERVENT_R_PROTO:
+ * This symbol encodes the prototype of setservent_r.
+ * It is zero if d_setservent_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_setservent_r
+ * is defined.
+ */
+/*#define HAS_SETSERVENT_R /**/
+#define SETSERVENT_R_PROTO 0 /**/
+
+/* HAS_SETVBUF:
+ * This symbol, if defined, indicates that the setvbuf routine is
+ * available to change buffering on an open stdio stream.
+ * to a line-buffered mode.
+ */
+#define HAS_SETVBUF /**/
+
+/* HAS_SHM:
+ * This symbol, if defined, indicates that the entire shm*(2) library is
+ * supported.
+ */
+/*#define HAS_SHM /**/
+
+/* Shmat_t:
+ * This symbol holds the return type of the shmat() system call.
+ * Usually set to 'void *' or 'char *'.
+ */
+/* HAS_SHMAT_PROTOTYPE:
+ * This symbol, if defined, indicates that the sys/shm.h includes
+ * a prototype for shmat(). Otherwise, it is up to the program to
+ * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess,
+ * but not always right so it should be emitted by the program only
+ * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
+ */
+#define Shmat_t void * /**/
+/*#define HAS_SHMAT_PROTOTYPE /**/
+
+/* HAS_SOCKET:
+ * This symbol, if defined, indicates that the BSD socket interface is
+ * supported.
+ */
+/* HAS_SOCKETPAIR:
+ * This symbol, if defined, indicates that the BSD socketpair() call is
+ * supported.
+ */
+/* HAS_MSG_CTRUNC:
+ * This symbol, if defined, indicates that the MSG_CTRUNC is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_DONTROUTE:
+ * This symbol, if defined, indicates that the MSG_DONTROUTE is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_OOB:
+ * This symbol, if defined, indicates that the MSG_OOB is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PEEK:
+ * This symbol, if defined, indicates that the MSG_PEEK is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_MSG_PROXY:
+ * This symbol, if defined, indicates that the MSG_PROXY is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+/* HAS_SCM_RIGHTS:
+ * This symbol, if defined, indicates that the SCM_RIGHTS is supported.
+ * Checking just with #ifdef might not be enough because this symbol
+ * has been known to be an enum.
+ */
+#define HAS_SOCKET /**/
+/*#define HAS_SOCKETPAIR /**/
+/*#define HAS_MSG_CTRUNC /**/
+/*#define HAS_MSG_DONTROUTE /**/
+/*#define HAS_MSG_OOB /**/
+/*#define HAS_MSG_PEEK /**/
+/*#define HAS_MSG_PROXY /**/
+/*#define HAS_SCM_RIGHTS /**/
+
+/* HAS_SRAND48_R:
+ * This symbol, if defined, indicates that the srand48_r routine
+ * is available to srand48 re-entrantly.
+ */
+/* SRAND48_R_PROTO:
+ * This symbol encodes the prototype of srand48_r.
+ * It is zero if d_srand48_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srand48_r
+ * is defined.
+ */
+/*#define HAS_SRAND48_R /**/
+#define SRAND48_R_PROTO 0 /**/
+
+/* HAS_SRANDOM_R:
+ * This symbol, if defined, indicates that the srandom_r routine
+ * is available to srandom re-entrantly.
+ */
+/* SRANDOM_R_PROTO:
+ * This symbol encodes the prototype of srandom_r.
+ * It is zero if d_srandom_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_srandom_r
+ * is defined.
+ */
+/*#define HAS_SRANDOM_R /**/
+#define SRANDOM_R_PROTO 0 /**/
+
+/* USE_STAT_BLOCKS:
+ * This symbol is defined if this system has a stat structure declaring
+ * st_blksize and st_blocks.
+ */
+#ifndef USE_STAT_BLOCKS
+/*#define USE_STAT_BLOCKS /**/
+#endif
+
+/* USE_STRUCT_COPY:
+ * This symbol, if defined, indicates that this C compiler knows how
+ * to copy structures. If undefined, you'll need to use a block copy
+ * routine of some sort instead.
+ */
+#define USE_STRUCT_COPY /**/
+
+/* HAS_STRERROR:
+ * This symbol, if defined, indicates that the strerror routine is
+ * available to translate error numbers to strings. See the writeup
+ * of Strerror() in this file before you try to define your own.
+ */
+/* HAS_SYS_ERRLIST:
+ * This symbol, if defined, indicates that the sys_errlist array is
+ * available to translate error numbers to strings. The extern int
+ * sys_nerr gives the size of that table.
+ */
+/* Strerror:
+ * This preprocessor symbol is defined as a macro if strerror() is
+ * not available to translate error numbers to strings but sys_errlist[]
+ * array is there.
+ */
+#define HAS_STRERROR /**/
+#define HAS_SYS_ERRLIST /**/
+#define Strerror(e) strerror(e)
+
+/* HAS_STRERROR_R:
+ * This symbol, if defined, indicates that the strerror_r routine
+ * is available to strerror re-entrantly.
+ */
+/* STRERROR_R_PROTO:
+ * This symbol encodes the prototype of strerror_r.
+ * It is zero if d_strerror_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_strerror_r
+ * is defined.
+ */
+/*#define HAS_STRERROR_R /**/
+#define STRERROR_R_PROTO 0 /**/
+
+/* HAS_STRTOUL:
+ * This symbol, if defined, indicates that the strtoul routine is
+ * available to provide conversion of strings to unsigned long.
+ */
+#define HAS_STRTOUL /**/
+
+/* HAS_TIME:
+ * This symbol, if defined, indicates that the time() routine exists.
+ */
+/* Time_t:
+ * This symbol holds the type returned by time(). It can be long,
+ * or time_t on BSD sites (in which case <sys/types.h> should be
+ * included).
+ */
+#define HAS_TIME /**/
+#define Time_t time_t /* Time type */
+
+/* HAS_TIMES:
+ * This symbol, if defined, indicates that the times() routine exists.
+ * Note that this became obsolete on some systems (SUNOS), which now
+ * use getrusage(). It may be necessary to include <sys/times.h>.
+ */
+#define HAS_TIMES /**/
+
+/* HAS_TMPNAM_R:
+ * This symbol, if defined, indicates that the tmpnam_r routine
+ * is available to tmpnam re-entrantly.
+ */
+/* TMPNAM_R_PROTO:
+ * This symbol encodes the prototype of tmpnam_r.
+ * It is zero if d_tmpnam_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_tmpnam_r
+ * is defined.
+ */
+/*#define HAS_TMPNAM_R /**/
+#define TMPNAM_R_PROTO 0 /**/
+
+/* HAS_TTYNAME_R:
+ * This symbol, if defined, indicates that the ttyname_r routine
+ * is available to ttyname re-entrantly.
+ */
+/* TTYNAME_R_PROTO:
+ * This symbol encodes the prototype of ttyname_r.
+ * It is zero if d_ttyname_r is undef, and one of the
+ * REENTRANT_PROTO_T_ABC macros of reentr.h if d_ttyname_r
+ * is defined.
+ */
+/*#define HAS_TTYNAME_R /**/
+#define TTYNAME_R_PROTO 0 /**/
+
+/* HAS_UNION_SEMUN:
+ * This symbol, if defined, indicates that the union semun is
+ * defined by including <sys/sem.h>. If not, the user code
+ * probably needs to define it as:
+ * union semun {
+ * int val;
+ * struct semid_ds *buf;
+ * unsigned short *array;
+ * }
+ */
+/* USE_SEMCTL_SEMUN:
+ * This symbol, if defined, indicates that union semun is
+ * used for semctl IPC_STAT.
+ */
+/* USE_SEMCTL_SEMID_DS:
+ * This symbol, if defined, indicates that struct semid_ds * is
+ * used for semctl IPC_STAT.
+ */
+#define HAS_UNION_SEMUN /**/
+/*#define USE_SEMCTL_SEMUN /**/
+/*#define USE_SEMCTL_SEMID_DS /**/
+
+/* HAS_VFORK:
+ * This symbol, if defined, indicates that vfork() exists.
+ */
+/*#define HAS_VFORK /**/
+
+/* HAS_PSEUDOFORK:
+ * This symbol, if defined, indicates that an emulation of the
+ * fork routine is available.
+ */
+/*#define HAS_PSEUDOFORK /**/
+
+/* Signal_t:
+ * This symbol's value is either "void" or "int", corresponding to the
+ * appropriate return type of a signal handler. Thus, you can declare
+ * a signal handler using "Signal_t (*handler)()", and define the
+ * handler using "Signal_t handler(sig)".
+ */
+#define Signal_t void /* Signal handler's return type */
+
+/* HASVOLATILE:
+ * This symbol, if defined, indicates that this C compiler knows about
+ * the volatile declaration.
+ */
+#define HASVOLATILE /**/
+#ifndef HASVOLATILE
+#define volatile
+#endif
+
+/* Fpos_t:
+ * This symbol holds the type used to declare file positions in libc.
+ * It can be fpos_t, long, uint, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Fpos_t fpos_t /* File position type */
+
+/* Gid_t_f:
+ * This symbol defines the format string used for printing a Gid_t.
+ */
+#define Gid_t_f "ld" /**/
+
+/* Gid_t_sign:
+ * This symbol holds the signedess of a Gid_t.
+ * 1 for unsigned, -1 for signed.
+ */
+#define Gid_t_sign -1 /* GID sign */
+
+/* Gid_t_size:
+ * This symbol holds the size of a Gid_t in bytes.
+ */
+#define Gid_t_size 4 /* GID size */
+
+/* Gid_t:
+ * This symbol holds the return type of getgid() and the type of
+ * argument to setrgid() and related functions. Typically,
+ * it is the type of group ids in the kernel. It can be int, ushort,
+ * gid_t, etc... It may be necessary to include <sys/types.h> to get
+ * any typedef'ed information.
+ */
+#define Gid_t gid_t /* Type for getgid(), etc... */
+
+/* I_DIRENT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <dirent.h>. Using this symbol also triggers the definition
+ * of the Direntry_t define which ends up being 'struct dirent' or
+ * 'struct direct' depending on the availability of <dirent.h>.
+ */
+/* DIRNAMLEN:
+ * This symbol, if defined, indicates to the C program that the length
+ * of directory entry names is provided by a d_namlen field. Otherwise
+ * you need to do strlen() on the d_name field.
+ */
+/* Direntry_t:
+ * This symbol is set to 'struct direct' or 'struct dirent' depending on
+ * whether dirent is available or not. You should use this pseudo type to
+ * portably declare your directory entries.
+ */
+#define I_DIRENT /**/
+#define DIRNAMLEN /**/
+#define Direntry_t struct direct
+
+/* I_GRP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <grp.h>.
+ */
+/* GRPASSWD:
+ * This symbol, if defined, indicates to the C program that struct group
+ * in <grp.h> contains gr_passwd.
+ */
+/*#define I_GRP /**/
+/*#define GRPASSWD /**/
+
+/* I_MACH_CTHREADS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <mach/cthreads.h>.
+ */
+/*#define I_MACH_CTHREADS /**/
+
+/* I_NDBM:
+ * This symbol, if defined, indicates that <ndbm.h> exists and should
+ * be included.
+ */
+/* I_GDBMNDBM:
+ * This symbol, if defined, indicates that <gdbm/ndbm.h> exists and should
+ * be included. This was the location of the ndbm.h compatibility file
+ * in RedHat 7.1.
+ */
+/* I_GDBM_NDBM:
+ * This symbol, if defined, indicates that <gdbm-ndbm.h> exists and should
+ * be included. This is the location of the ndbm.h compatibility file
+ * in Debian 4.0.
+ */
+/* NDBM_H_USES_PROTOTYPES:
+ * This symbol, if defined, indicates that <ndbm.h> uses real ANSI C
+ * prototypes instead of K&R style function declarations without any
+ * parameter information. While ANSI C prototypes are supported in C++,
+ * K&R style function declarations will yield errors.
+ */
+/* GDBMNDBM_H_USES_PROTOTYPES:
+ * This symbol, if defined, indicates that <gdbm/ndbm.h> uses real ANSI C
+ * prototypes instead of K&R style function declarations without any
+ * parameter information. While ANSI C prototypes are supported in C++,
+ * K&R style function declarations will yield errors.
+ */
+/* GDBM_NDBM_H_USES_PROTOTYPES:
+ * This symbol, if defined, indicates that <gdbm-ndbm.h> uses real ANSI C
+ * prototypes instead of K&R style function declarations without any
+ * parameter information. While ANSI C prototypes are supported in C++,
+ * K&R style function declarations will yield errors.
+ */
+/*#define I_NDBM /**/
+/*#define I_GDBMNDBM /**/
+/*#define I_GDBM_NDBM /**/
+/*#define NDBM_H_USES_PROTOTYPES /**/
+/*#define GDBMNDBM_H_USES_PROTOTYPES /**/
+/*#define GDBM_NDBM_H_USES_PROTOTYPES /**/
+
+/* I_NETDB:
+ * This symbol, if defined, indicates that <netdb.h> exists and
+ * should be included.
+ */
+/*#define I_NETDB /**/
+
+/* I_NET_ERRNO:
+ * This symbol, if defined, indicates that <net/errno.h> exists and
+ * should be included.
+ */
+/*#define I_NET_ERRNO /**/
+
+/* I_PTHREAD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pthread.h>.
+ */
+/*#define I_PTHREAD /**/
+
+/* I_PWD:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <pwd.h>.
+ */
+/* PWQUOTA:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_quota.
+ */
+/* PWAGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_age.
+ */
+/* PWCHANGE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_change.
+ */
+/* PWCLASS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_class.
+ */
+/* PWEXPIRE:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_expire.
+ */
+/* PWCOMMENT:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_comment.
+ */
+/* PWGECOS:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_gecos.
+ */
+/* PWPASSWD:
+ * This symbol, if defined, indicates to the C program that struct passwd
+ * contains pw_passwd.
+ */
+/*#define I_PWD /**/
+/*#define PWQUOTA /**/
+/*#define PWAGE /**/
+/*#define PWCHANGE /**/
+/*#define PWCLASS /**/
+/*#define PWEXPIRE /**/
+/*#define PWCOMMENT /**/
+/*#define PWGECOS /**/
+/*#define PWPASSWD /**/
+
+/* I_SYS_ACCESS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/access.h>.
+ */
+/*#define I_SYS_ACCESS /**/
+
+/* I_SYS_SECURITY:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/security.h>.
+ */
+/*#define I_SYS_SECURITY /**/
+
+/* I_SYSUIO:
+ * This symbol, if defined, indicates that <sys/uio.h> exists and
+ * should be included.
+ */
+/*#define I_SYSUIO /**/
+
+/* I_STDARG:
+ * This symbol, if defined, indicates that <stdarg.h> exists and should
+ * be included.
+ */
+/* I_VARARGS:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <varargs.h>.
+ */
+#define I_STDARG /**/
+/*#define I_VARARGS /**/
+
+/* PERL_INC_VERSION_LIST:
+ * This variable specifies the list of subdirectories in over
+ * which perl.c:incpush() and lib/lib.pm will automatically
+ * search when adding directories to @INC, in a format suitable
+ * for a C initialization string. See the inc_version_list entry
+ * in Porting/Glossary for more details.
+ */
+/*#define PERL_INC_VERSION_LIST 0 /**/
+
+/* INSTALL_USR_BIN_PERL:
+ * This symbol, if defined, indicates that Perl is to be installed
+ * also as /usr/bin/perl.
+ */
+/*#define INSTALL_USR_BIN_PERL /**/
+
+/* Off_t:
+ * This symbol holds the type used to declare offsets in the kernel.
+ * It can be int, long, off_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+/* LSEEKSIZE:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+/* Off_t_size:
+ * This symbol holds the number of bytes used by the Off_t.
+ */
+#define Off_t long /* <offset> type */
+#define LSEEKSIZE 4 /* <offset> size */
+#define Off_t_size 4 /* <offset> size */
+
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
+ */
+/* Malloc_t:
+ * This symbol is the type of pointer returned by malloc and realloc.
*/
#define Malloc_t void * /**/
#define Free_t void /**/
+/* PERL_MALLOC_WRAP:
+ * This symbol, if defined, indicates that we'd like malloc wrap checks.
+ */
+#define PERL_MALLOC_WRAP /**/
+
/* MYMALLOC:
* This symbol, if defined, indicates that we're using our own malloc.
*/
-#define MYMALLOC /**/
+/*#define MYMALLOC /**/
+
+/* Mode_t:
+ * This symbol holds the type used to declare file modes
+ * for systems calls. It is usually mode_t, but may be
+ * int or unsigned short. It may be necessary to include <sys/types.h>
+ * to get any typedef'ed information.
+ */
+#define Mode_t mode_t /* file mode parameter for system calls */
+
+/* Netdb_host_t:
+ * This symbol holds the type used for the 1st argument
+ * to gethostbyaddr().
+ */
+/* Netdb_hlen_t:
+ * This symbol holds the type used for the 2nd argument
+ * to gethostbyaddr().
+ */
+/* Netdb_name_t:
+ * This symbol holds the type used for the argument to
+ * gethostbyname().
+ */
+/* Netdb_net_t:
+ * This symbol holds the type used for the 1st argument to
+ * getnetbyaddr().
+ */
+#define Netdb_host_t char * /**/
+#define Netdb_hlen_t int /**/
+#define Netdb_name_t char * /**/
+#define Netdb_net_t long /**/
+
+/* PERL_OTHERLIBDIRS:
+ * This variable contains a colon-separated set of paths for the perl
+ * binary to search for additional library files or modules.
+ * These directories will be tacked to the end of @INC.
+ * Perl will automatically search below each path for version-
+ * and architecture-specific directories. See PERL_INC_VERSION_LIST
+ * for more details.
+ */
+/*#define PERL_OTHERLIBDIRS "" /**/
+
+/* Pid_t:
+ * This symbol holds the type used to declare process ids in the kernel.
+ * It can be int, uint, pid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Pid_t int /* PID type */
+
+/* PRIVLIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ */
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB "c:\\perl\\lib" /**/
+#define PRIVLIB_EXP (win32_get_privlib(PERL_VERSION_STRING, NULL)) /**/
+
+/* CAN_PROTOTYPE:
+ * If defined, this macro indicates that the C compiler can handle
+ * function prototypes.
+ */
+/* _:
+ * This macro is used to declare function parameters for folks who want
+ * to make declarations with prototypes using a different style than
+ * the above macros. Use double parentheses. For example:
+ *
+ * int main _((int argc, char *argv[]));
+ */
+#define CAN_PROTOTYPE /**/
+#ifdef CAN_PROTOTYPE
+#define _(args) args
+#else
+#define _(args) ()
+#endif
+
+/* Select_fd_set_t:
+ * This symbol holds the type used for the 2nd, 3rd, and 4th
+ * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
+ * is defined, and 'int *' otherwise. This is only useful if you
+ * have select(), of course.
+ */
+#define Select_fd_set_t Perl_fd_set * /**/
+
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
+ * D:/bin/sh.exe.
+ */
+#define SH_PATH "cmd /x /c" /**/
+
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order of
+ * signal number. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT".
+ * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
+ * etc., where nn is the actual signal number (e.g. NUM37).
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_name_init list.
+ * Note that this variable is initialized from the sig_name_init,
+ * not from sig_name (which is unused).
+ */
+/* SIG_NUM:
+ * This symbol contains a list of signal numbers, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup.
+ * Duplicates are allowed, but are moved to the end of the list.
+ * The signal number corresponding to sig_name[i] is sig_number[i].
+ * if (i < NSIG) then sig_number[i] == i.
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name_init list.
+ * Note that this variable is initialized from the sig_num_init,
+ * not from sig_num (which is unused).
+ */
+/* SIG_SIZE:
+ * This variable contains the number of elements of the SIG_NAME
+ * and SIG_NUM arrays, excluding the final NULL entry.
+ */
+#define SIG_NAME "ZERO", "HUP", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/
+#define SIG_NUM 0, 1, 2, 21, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/
+#define SIG_SIZE 27 /**/
+
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-dependent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITEARCH "c:\\perl\\site\\lib" /**/
+/*#define SITEARCH_EXP "" /**/
+
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * After perl has been installed, users may install their own local
+ * architecture-independent modules in this directory with
+ * MakeMaker Makefile.PL
+ * or equivalent. See INSTALL for details.
+ */
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* SITELIB_STEM:
+ * This define is SITELIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+#define SITELIB "c:\\perl\\site\\lib" /**/
+#define SITELIB_EXP (win32_get_sitelib(PERL_VERSION_STRING, NULL)) /**/
+#define SITELIB_STEM "" /**/
-/* CAN_PROTOTYPE:
- * If defined, this macro indicates that the C compiler can handle
- * function prototypes.
+/* Size_t_size:
+ * This symbol holds the size of a Size_t in bytes.
*/
-/* _:
- * This macro is used to declare function parameters for folks who want
- * to make declarations with prototypes using a different style than
- * the above macros. Use double parentheses. For example:
- *
- * int main _((int argc, char *argv[]));
+#define Size_t_size 4 /**/
+
+/* Size_t:
+ * This symbol holds the type used to declare length parameters
+ * for string functions. It is usually size_t, but may be
+ * unsigned long, int, etc. It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
*/
-#define CAN_PROTOTYPE /**/
-#ifdef CAN_PROTOTYPE
-#define _(args) args
-#else
-#define _(args) ()
-#endif
+#define Size_t size_t /* length paramater for string functions */
-/* SH_PATH:
- * This symbol contains the full pathname to the shell used on this
- * on this system to execute Bourne shell scripts. Usually, this will be
- * /bin/sh, though it's possible that some systems will have /bin/ksh,
- * /bin/pdksh, /bin/ash, /bin/bash, or even something such as
- * D:/bin/sh.exe.
+/* Sock_size_t:
+ * This symbol holds the type used for the size argument of
+ * various socket calls (just the base type, not the pointer-to).
*/
-#define SH_PATH "cmd /x /c" /**/
+#define Sock_size_t int /**/
/* STDCHAR:
* This symbol is defined to be the type of char used in stdio.h.
*/
#define STDCHAR char /**/
+/* Uid_t_f:
+ * This symbol defines the format string used for printing a Uid_t.
+ */
+#define Uid_t_f "ld" /**/
+
+/* Uid_t_sign:
+ * This symbol holds the signedess of a Uid_t.
+ * 1 for unsigned, -1 for signed.
+ */
+#define Uid_t_sign -1 /* UID sign */
+
+/* Uid_t_size:
+ * This symbol holds the size of a Uid_t in bytes.
+ */
+#define Uid_t_size 4 /* UID size */
+
+/* Uid_t:
+ * This symbol holds the type used to declare user ids in the kernel.
+ * It can be int, ushort, uid_t, etc... It may be necessary to include
+ * <sys/types.h> to get any typedef'ed information.
+ */
+#define Uid_t uid_t /* UID type */
+
+/* USE_ITHREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the interpreter-based threading implementation.
+ */
+/* USE_5005THREADS:
+ * This symbol, if defined, indicates that Perl should be built to
+ * use the 5.005-based threading implementation.
+ * Only valid up to 5.8.x.
+ */
+/* OLD_PTHREADS_API:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use the old draft POSIX threads API.
+ */
+/* USE_REENTRANT_API:
+ * This symbol, if defined, indicates that Perl should
+ * try to use the various _r versions of library functions.
+ * This is extremely experimental.
+ */
+/*#define USE_5005THREADS /**/
+/*#define USE_ITHREADS /**/
+#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
+#define USE_THREADS /* until src is revised*/
+#endif
+/*#define OLD_PTHREADS_API /**/
+/*#define USE_REENTRANT_API /**/
+
+/* PERL_VENDORARCH:
+ * If defined, this symbol contains the name of a private library.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world.
+ * It may have a ~ on the front.
+ * The standard distribution will put nothing in this directory.
+ * Vendors who distribute perl may wish to place their own
+ * architecture-dependent modules and extensions in this directory with
+ * MakeMaker Makefile.PL INSTALLDIRS=vendor
+ * or equivalent. See INSTALL for details.
+ */
+/* PERL_VENDORARCH_EXP:
+ * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/*#define PERL_VENDORARCH "" /**/
+/*#define PERL_VENDORARCH_EXP "" /**/
+
+/* PERL_VENDORLIB_EXP:
+ * This symbol contains the ~name expanded version of VENDORLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* PERL_VENDORLIB_STEM:
+ * This define is PERL_VENDORLIB_EXP with any trailing version-specific component
+ * removed. The elements in inc_version_list (inc_version_list.U) can
+ * be tacked onto this variable to generate a list of directories to search.
+ */
+/*#define PERL_VENDORLIB_EXP "" /**/
+/*#define PERL_VENDORLIB_STEM "" /**/
+
/* VOIDFLAGS:
* This symbol indicates how much support of the void type is given by this
* compiler. What various bits mean:
#define M_VOID /* Xenix strikes again */
#endif
+/* USE_CROSS_COMPILE:
+ * This symbol, if defined, indicates that Perl is being cross-compiled.
+ */
+/* PERL_TARGETARCH:
+ * This symbol, if defined, indicates the target architecture
+ * Perl has been cross-compiled to. Undefined if not a cross-compile.
+ */
+#ifndef USE_CROSS_COMPILE
+/*#define USE_CROSS_COMPILE /**/
+#define PERL_TARGETARCH "" /**/
+#endif
+
/* MEM_ALIGNBYTES:
- * This symbol contains the number of bytes required to align a
- * double. Usual values are 2, 4 and 8.
- * On NeXT starting with 3.2, you can build "Fat" Multiple Architecture
- * Binaries (MAB) for targets with varying alignment. This only matters
- * for perl, where the config.h can be generated and installed on one
- * system, and used by a different architecture to build an extension.
- * The default is eight, for safety.
+ * This symbol contains the number of bytes required to align a
+ * double, or a long double when applicable. Usual values are 2,
+ * 4 and 8. The default is eight, for safety.
*/
-#define MEM_ALIGNBYTES 8 /**/
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+# define MEM_ALIGNBYTES 8
+#else
+#define MEM_ALIGNBYTES 8
+#endif
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
- * i.e. 0x1234 or 0x4321, etc...
+ * in a UV, i.e. 0x1234 or 0x4321 or 0x12345678, etc...
+ * If the compiler supports cross-compiling or multiple-architecture
+ * binaries (eg. on NeXT systems), use compiler-defined macros to
+ * determine the byte order.
* On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture
* Binaries (MAB) on either big endian or little endian machines.
* The endian-ness is available at compile-time. This only matters
- * for perl, where the config.h can be generated and installed on
+ * for perl, where the config.h can be generated and installed on
* one system, and used by a different architecture to build an
* extension. Older versions of NeXT that might not have
* defined either *_ENDIAN__ were all on Motorola 680x0 series,
- * so the default case (for NeXT) is big endian to catch them.
+ * so the default case (for NeXT) is big endian to catch them.
* This might matter for NeXT 3.0.
*/
-#ifndef NeXT
+#if defined(USE_CROSS_COMPILE) || defined(MULTIARCH)
+# ifdef __LITTLE_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x1234
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x12345678
+# endif
+# endif
+# else
+# ifdef __BIG_ENDIAN__
+# if LONGSIZE == 4
+# define BYTEORDER 0x4321
+# else
+# if LONGSIZE == 8
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+# endif
+# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__))
+# define BYTEORDER 0x4321
+# endif
+#else
#define BYTEORDER 0x1234 /* large digits for MSB */
-#else /* NeXT */
-#ifdef __LITTLE_ENDIAN__
-#define BYTEORDER 0x1234
-#else /* __BIG_ENDIAN__ */
-#define BYTEORDER 0x4321
-#endif /* ENDIAN CHECK */
#endif /* NeXT */
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
-#define CASTI32 /**/
+#ifndef _MSC_VER
+# define CASTI32 /**/
+#endif
/* CASTNEGFLOAT:
* This symbol is defined if the C compiler can cast negative
*/
/*#define VOID_CLOSEDIR /**/
+/* HAS_FD_SET:
+ * This symbol, when defined, indicates presence of the fd_set typedef
+ * in <sys/types.h>
+ */
+#define HAS_FD_SET /**/
+
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* number to a string without a trailing decimal point. This
* a macro using sprintf("%g") is used. Arguments for the Gconvert
* macro are: value, number of digits, whether trailing zeros should
* be retained, and the output buffer.
- * Possible values are:
+ * The usual values are:
* d_Gconvert='gconvert((x),(n),(t),(b))'
* d_Gconvert='gcvt((x),(n),(b))'
* d_Gconvert='sprintf((b),"%.*g",(n),(x))'
*/
#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
+ */
+/*#define HAS_GETPAGESIZE /**/
+
/* HAS_GNULIBC:
- * This symbol, if defined, indicates to the C program that
- * the GNU C library is being used.
+ * This symbol, if defined, indicates to the C program that
+ * the GNU C library is being used. A better check is to use
+ * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc.
*/
/*#define HAS_GNULIBC /**/
+#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+
/* HAS_ISASCII:
- * This manifest constant lets the C program know that isascii
+ * This manifest constant lets the C program know that isascii
* is available.
*/
#define HAS_ISASCII /**/
/* HAS_SAFE_BCOPY:
* This symbol, if defined, indicates that the bcopy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
+ * to copy potentially overlapping memory blocks. Normally, you should
* probably use memmove() or memcpy(). If neither is defined, roll your
* own version.
*/
/* HAS_SAFE_MEMCPY:
* This symbol, if defined, indicates that the memcpy routine is available
- * to copy potentially overlapping memory blocks. Otherwise you should
- * probably use memmove() or memcpy(). If neither is defined, roll your
- * own version.
+ * to copy potentially overlapping memory blocks. If you need to
+ * copy overlapping memory blocks, you should check HAS_MEMMOVE and
+ * use memmove() instead, if available.
*/
/*#define HAS_SAFE_MEMCPY /**/
*/
/*#define HAS_SIGACTION /**/
+/* HAS_SIGSETJMP:
+ * This variable indicates to the C program that the sigsetjmp()
+ * routine is available to save the calling process's registers
+ * and stack environment for later use by siglongjmp(), and
+ * to optionally save the process's signal mask. See
+ * Sigjmp_buf, Sigsetjmp, and Siglongjmp.
+ */
/* Sigjmp_buf:
* This is the buffer type to be used with Sigsetjmp and Siglongjmp.
*/
* This symbol is defined if the FILE_cnt macro can be used as an
* lvalue.
*/
-/*#define USE_STDIO_PTR /**/
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
+#define USE_STDIO_PTR /**/
#ifdef USE_STDIO_PTR
#define FILE_ptr(fp) ((fp)->_ptr)
#define STDIO_PTR_LVALUE /**/
#define FILE_cnt(fp) ((fp)->_cnt)
#define STDIO_CNT_LVALUE /**/
+/*#define STDIO_PTR_LVAL_SETS_CNT /**/
+#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
#endif
/* USE_STDIO_BASE:
* structure pointed to its argument. This macro will always be defined
* if USE_STDIO_BASE is defined.
*/
-/*#define USE_STDIO_BASE /**/
+#define USE_STDIO_BASE /**/
#ifdef USE_STDIO_BASE
#define FILE_base(fp) ((fp)->_base)
#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
* This symbol, if defined, indicates to the C program that it should
* include <sys/time.h> with KERNEL defined.
*/
+/* HAS_TM_TM_ZONE:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_zone field.
+ */
+/* HAS_TM_TM_GMTOFF:
+ * This symbol, if defined, indicates to the C program that
+ * the struct tm has a tm_gmtoff field.
+ */
#define I_TIME /**/
/*#define I_SYS_TIME /**/
/*#define I_SYS_TIME_KERNEL /**/
-
-/* INTSIZE:
- * This symbol contains the value of sizeof(int) so that the C
- * preprocessor can make decisions based on it.
- */
-/* LONGSIZE:
- * This symbol contains the value of sizeof(long) so that the C
- * preprocessor can make decisions based on it.
- */
-/* SHORTSIZE:
- * This symbol contains the value of sizeof(short) so that the C
- * preprocessor can make decisions based on it.
- */
-#define INTSIZE 4 /**/
-#define LONGSIZE 4 /**/
-#define SHORTSIZE 2 /**/
+/*#define HAS_TM_TM_ZONE /**/
+/*#define HAS_TM_TM_GMTOFF /**/
/* VAL_O_NONBLOCK:
* This symbol is to be used during open() or fcntl(F_SETFL) to turn on
*/
#define PTRSIZE 4 /**/
+/* Drand01:
+ * This macro is to be used to generate uniformly distributed
+ * random numbers over the range [0., 1.[. You may have to supply
+ * an 'extern double drand48();' in your program since SunOS 4.1.3
+ * doesn't provide you with anything relevant in its headers.
+ * See HAS_DRAND48_PROTO.
+ */
+/* Rand_seed_t:
+ * This symbol defines the type of the argument of the
+ * random seed function.
+ */
+/* seedDrand01:
+ * This symbol defines the macro to be used in seeding the
+ * random number generator (see Drand01).
+ */
/* RANDBITS:
- * This symbol contains the number of bits of random number the rand()
- * function produces. Usual values are 15, 16, and 31.
+ * This symbol indicates how many bits are produced by the
+ * function used to generate normalized random numbers.
+ * Values include 15, 16, 31, and 48.
*/
-#define RANDBITS 15 /**/
+#define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/
+#define Rand_seed_t unsigned /**/
+#define seedDrand01(x) srand((Rand_seed_t)x) /**/
+#define RANDBITS 15 /**/
/* SSize_t:
* This symbol holds the type used by functions that return
*/
#define SSize_t int /* signed count of bytes */
-/* OSNAME:
- * This symbol contains the name of the operating system, as determined
- * by Configure. You shouldn't rely on it too much; the specific
- * feature tests from Configure are generally more reliable.
+/* EBCDIC:
+ * This symbol, if defined, indicates that this system uses
+ * EBCDIC encoding.
*/
-#define OSNAME "MSWin32" /**/
+/*#define EBCDIC /**/
-/* ARCHLIB:
- * This variable, if defined, holds the name of the directory in
- * which the user wants to put architecture-dependent public
- * library files for perl5. It is most often a local directory
- * such as /usr/local/lib. Programs using this variable must be
- * prepared to deal with filename expansion. If ARCHLIB is the
- * same as PRIVLIB, it is not defined, since presumably the
- * program already searches PRIVLIB.
+/* PERL_USE_DEVEL:
+ * This symbol, if defined, indicates that Perl was configured with
+ * -Dusedevel, to enable development features. This should not be
+ * done for production builds.
*/
-/* ARCHLIB_EXP:
- * This symbol contains the ~name expanded version of ARCHLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/*#define PERL_USE_DEVEL /**/
+
+/* HAS_ATOLF:
+ * This symbol, if defined, indicates that the atolf routine is
+ * available to convert strings into long doubles.
*/
-#define ARCHLIB "c:\\perl.gcc\\5.00467\\lib\\MSWin32-x86" /**/
-/*#define ARCHLIB_EXP "" /**/
+/*#define HAS_ATOLF /**/
-/* CAT2:
- * This macro catenates 2 tokens together.
+/* HAS_ATOLL:
+ * This symbol, if defined, indicates that the atoll routine is
+ * available to convert strings into long longs.
*/
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
+/*#define HAS_ATOLL /**/
+
+/* HAS__FWALK:
+ * This symbol, if defined, indicates that the _fwalk system call is
+ * available to apply a function to all the file handles.
*/
-#if 42 == 1
-#define CAT2(a,b)a/**/b
-#define STRINGIFY(a)"a"
- /* If you can get stringification with catify, tell me how! */
-#endif
-#if 42 == 42
-#define CAT2(a,b)a ## b
-#define StGiFy(a)# a
-#define STRINGIFY(a)StGiFy(a)
-#endif
-#if 42 != 1 && 42 != 42
-#include "Bletch: How does this C preprocessor catenate tokens?"
-#endif
+/*#define HAS__FWALK /**/
+
+/* HAS_AINTL:
+ * This symbol, if defined, indicates that the aintl routine is
+ * available. If copysignl is also present we can emulate modfl.
+ */
+/*#define HAS_AINTL /**/
+
+/* HAS_BUILTIN_CHOOSE_EXPR:
+ * Can we handle GCC builtin for compile-time ternary-like expressions
+ */
+/* HAS_BUILTIN_EXPECT:
+ * Can we handle GCC builtin for telling that certain values are more
+ * likely
+ */
+/*#define HAS_BUILTIN_EXPECT /**/
+/*#define HAS_BUILTIN_CHOOSE_EXPR /**/
+
+/* HAS_C99_VARIADIC_MACROS:
+ * If defined, the compiler supports C99 variadic macros.
+ */
+/*#define HAS_C99_VARIADIC_MACROS /**/
+
+/* HAS_CLASS:
+ * This symbol, if defined, indicates that the class routine is
+ * available to classify doubles. Available for example in AIX.
+ * The returned values are defined in <float.h> and are:
+ *
+ * FP_PLUS_NORM Positive normalized, nonzero
+ * FP_MINUS_NORM Negative normalized, nonzero
+ * FP_PLUS_DENORM Positive denormalized, nonzero
+ * FP_MINUS_DENORM Negative denormalized, nonzero
+ * FP_PLUS_ZERO +0.0
+ * FP_MINUS_ZERO -0.0
+ * FP_PLUS_INF +INF
+ * FP_MINUS_INF -INF
+ * FP_NANS Signaling Not a Number (NaNS)
+ * FP_NANQ Quiet Not a Number (NaNQ)
+ */
+/*#define HAS_CLASS /**/
+
+/* HAS_CLEARENV:
+ * This symbol, if defined, indicates that the clearenv () routine is
+ * available for use.
+ */
+/*#define HAS_CLEARENV /**/
+
+/* HAS_STRUCT_CMSGHDR:
+ * This symbol, if defined, indicates that the struct cmsghdr
+ * is supported.
+ */
+/*#define HAS_STRUCT_CMSGHDR /**/
+
+/* HAS_COPYSIGNL:
+ * This symbol, if defined, indicates that the copysignl routine is
+ * available. If aintl is also present we can emulate modfl.
+ */
+/*#define HAS_COPYSIGNL /**/
+
+/* USE_CPLUSPLUS:
+ * This symbol, if defined, indicates that a C++ compiler was
+ * used to compiled Perl and will be used to compile extensions.
+ */
+/*#define USE_CPLUSPLUS /**/
+
+/* HAS_DBMINIT_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the dbminit() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int dbminit(char *);
+ */
+/*#define HAS_DBMINIT_PROTO /**/
+
+/* HAS_DIR_DD_FD:
+ * This symbol, if defined, indicates that the the DIR* dirstream
+ * structure contains a member variable named dd_fd.
+ */
+/*#define HAS_DIR_DD_FD /**/
+
+/* HAS_DIRFD:
+ * This manifest constant lets the C program know that dirfd
+ * is available.
+ */
+/*#define HAS_DIRFD /**/
+
+/* DLSYM_NEEDS_UNDERSCORE:
+ * This symbol, if defined, indicates that we need to prepend an
+ * underscore to the symbol name before calling dlsym(). This only
+ * makes sense if you *have* dlsym, which we will presume is the
+ * case if you're using dl_dlopen.xs.
+ */
+/*#define DLSYM_NEEDS_UNDERSCORE /**/
+
+/* HAS_FAST_STDIO:
+ * This symbol, if defined, indicates that the "fast stdio"
+ * is available to manipulate the stdio buffers directly.
+ */
+#define HAS_FAST_STDIO /**/
+
+/* HAS_FCHDIR:
+ * This symbol, if defined, indicates that the fchdir routine is
+ * available to change directory using a file descriptor.
+ */
+/*#define HAS_FCHDIR /**/
+
+/* FCNTL_CAN_LOCK:
+ * This symbol, if defined, indicates that fcntl() can be used
+ * for file locking. Normally on Unix systems this is defined.
+ * It may be undefined on VMS.
+ */
+/*#define FCNTL_CAN_LOCK /**/
+
+/* HAS_FINITE:
+ * This symbol, if defined, indicates that the finite routine is
+ * available to check whether a double is finite (non-infinity non-NaN).
+ */
+/*#define HAS_FINITE /**/
+
+/* HAS_FINITEL:
+ * This symbol, if defined, indicates that the finitel routine is
+ * available to check whether a long double is finite
+ * (non-infinity non-NaN).
+ */
+/*#define HAS_FINITEL /**/
+
+/* HAS_FLOCK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the flock() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int flock(int, int);
+ */
+#define HAS_FLOCK_PROTO /**/
+
+/* HAS_FP_CLASS:
+ * This symbol, if defined, indicates that the fp_class routine is
+ * available to classify doubles. Available for example in Digital UNIX.
+ * The returned values are defined in <math.h> and are:
+ *
+ * FP_SNAN Signaling NaN (Not-a-Number)
+ * FP_QNAN Quiet NaN (Not-a-Number)
+ * FP_POS_INF +infinity
+ * FP_NEG_INF -infinity
+ * FP_POS_NORM Positive normalized
+ * FP_NEG_NORM Negative normalized
+ * FP_POS_DENORM Positive denormalized
+ * FP_NEG_DENORM Negative denormalized
+ * FP_POS_ZERO +0.0 (positive zero)
+ * FP_NEG_ZERO -0.0 (negative zero)
+ */
+/*#define HAS_FP_CLASS /**/
+
+/* HAS_FPCLASS:
+ * This symbol, if defined, indicates that the fpclass routine is
+ * available to classify doubles. Available for example in Solaris/SVR4.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
+ * FP_NINF negative infinity
+ * FP_PINF positive infinity
+ * FP_NDENORM negative denormalized non-zero
+ * FP_PDENORM positive denormalized non-zero
+ * FP_NZERO negative zero
+ * FP_PZERO positive zero
+ * FP_NNORM negative normalized non-zero
+ * FP_PNORM positive normalized non-zero
+ */
+/*#define HAS_FPCLASS /**/
+
+/* HAS_FPCLASSIFY:
+ * This symbol, if defined, indicates that the fpclassify routine is
+ * available to classify doubles. Available for example in HP-UX.
+ * The returned values are defined in <math.h> and are
+ *
+ * FP_NORMAL Normalized
+ * FP_ZERO Zero
+ * FP_INFINITE Infinity
+ * FP_SUBNORMAL Denormalized
+ * FP_NAN NaN
+ *
+ */
+/*#define HAS_FPCLASSIFY /**/
+
+/* HAS_FPCLASSL:
+ * This symbol, if defined, indicates that the fpclassl routine is
+ * available to classify long doubles. Available for example in IRIX.
+ * The returned values are defined in <ieeefp.h> and are:
+ *
+ * FP_SNAN signaling NaN
+ * FP_QNAN quiet NaN
+ * FP_NINF negative infinity
+ * FP_PINF positive infinity
+ * FP_NDENORM negative denormalized non-zero
+ * FP_PDENORM positive denormalized non-zero
+ * FP_NZERO negative zero
+ * FP_PZERO positive zero
+ * FP_NNORM negative normalized non-zero
+ * FP_PNORM positive normalized non-zero
+ */
+/*#define HAS_FPCLASSL /**/
+
+/* HAS_FPOS64_T:
+ * This symbol will be defined if the C compiler supports fpos64_t.
+ */
+/*#define HAS_FPOS64_T /**/
+
+/* HAS_FREXPL:
+ * This symbol, if defined, indicates that the frexpl routine is
+ * available to break a long double floating-point number into
+ * a normalized fraction and an integral power of 2.
+ */
+/*#define HAS_FREXPL /**/
+
+/* HAS_STRUCT_FS_DATA:
+ * This symbol, if defined, indicates that the struct fs_data
+ * to do statfs() is supported.
+ */
+/*#define HAS_STRUCT_FS_DATA /**/
+
+/* HAS_FSEEKO:
+ * This symbol, if defined, indicates that the fseeko routine is
+ * available to fseek beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FSEEKO /**/
+
+/* HAS_FSTATFS:
+ * This symbol, if defined, indicates that the fstatfs routine is
+ * available to stat filesystems by file descriptors.
+ */
+/*#define HAS_FSTATFS /**/
+
+/* HAS_FSYNC:
+ * This symbol, if defined, indicates that the fsync routine is
+ * available to write a file's modified data and attributes to
+ * permanent storage.
+ */
+/*#define HAS_FSYNC /**/
+
+/* HAS_FTELLO:
+ * This symbol, if defined, indicates that the ftello routine is
+ * available to ftell beyond 32 bits (useful for ILP32 hosts).
+ */
+/*#define HAS_FTELLO /**/
+
+/* HAS_FUTIMES:
+ * This symbol, if defined, indicates that the futimes routine is
+ * available to change file descriptor time stamps with struct timevals.
+ */
+/*#define HAS_FUTIMES /**/
+
+/* HAS_GETCWD:
+ * This symbol, if defined, indicates that the getcwd routine is
+ * available to get the current working directory.
+ */
+#define HAS_GETCWD /**/
+
+/* HAS_GETESPWNAM:
+ * This symbol, if defined, indicates that the getespwnam system call is
+ * available to retrieve enchanced (shadow) password entries by name.
+ */
+/*#define HAS_GETESPWNAM /**/
+
+/* HAS_GETFSSTAT:
+ * This symbol, if defined, indicates that the getfsstat routine is
+ * available to stat filesystems in bulk.
+ */
+/*#define HAS_GETFSSTAT /**/
+
+/* HAS_GETITIMER:
+ * This symbol, if defined, indicates that the getitimer routine is
+ * available to return interval timers.
+ */
+/*#define HAS_GETITIMER /**/
+
+/* HAS_GETMNT:
+ * This symbol, if defined, indicates that the getmnt routine is
+ * available to get filesystem mount info by filename.
+ */
+/*#define HAS_GETMNT /**/
+
+/* HAS_GETMNTENT:
+ * This symbol, if defined, indicates that the getmntent routine is
+ * available to iterate through mounted file systems to get their info.
+ */
+/*#define HAS_GETMNTENT /**/
+
+/* HAS_GETPRPWNAM:
+ * This symbol, if defined, indicates that the getprpwnam system call is
+ * available to retrieve protected (shadow) password entries by name.
+ */
+/*#define HAS_GETPRPWNAM /**/
+
+/* HAS_GETSPNAM:
+ * This symbol, if defined, indicates that the getspnam system call is
+ * available to retrieve SysV shadow password entries by name.
+ */
+/*#define HAS_GETSPNAM /**/
+
+/* HAS_HASMNTOPT:
+ * This symbol, if defined, indicates that the hasmntopt routine is
+ * available to query the mount options of file systems.
+ */
+/*#define HAS_HASMNTOPT /**/
+
+/* HAS_ILOGBL:
+ * This symbol, if defined, indicates that the ilogbl routine is
+ * available. If scalbnl is also present we can emulate frexpl.
+ */
+/*#define HAS_ILOGBL /**/
+
+/* HAS_INT64_T:
+ * This symbol will defined if the C compiler supports int64_t.
+ * Usually the <inttypes.h> needs to be included, but sometimes
+ * <sys/types.h> is enough.
+ */
+/*#define HAS_INT64_T /**/
+
+/* HAS_ISFINITE:
+ * This symbol, if defined, indicates that the isfinite routine is
+ * available to check whether a double is finite (non-infinity non-NaN).
+ */
+/*#define HAS_ISFINITE /**/
+
+/* HAS_ISINF:
+ * This symbol, if defined, indicates that the isinf routine is
+ * available to check whether a double is an infinity.
+ */
+/*#define HAS_ISINF /**/
+
+/* HAS_ISNAN:
+ * This symbol, if defined, indicates that the isnan routine is
+ * available to check whether a double is a NaN.
+ */
+#define HAS_ISNAN /**/
+
+/* HAS_ISNANL:
+ * This symbol, if defined, indicates that the isnanl routine is
+ * available to check whether a long double is a NaN.
+ */
+/*#define HAS_ISNANL /**/
+
+/* HAS_LDBL_DIG:
+ * This symbol, if defined, indicates that this system's <float.h>
+ * or <limits.h> defines the symbol LDBL_DIG, which is the number
+ * of significant digits in a long double precision number. Unlike
+ * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
+ */
+#define HAS_LDBL_DIG /**/
+
+/* LIBM_LIB_VERSION:
+ * This symbol, if defined, indicates that libm exports _LIB_VERSION
+ * and that math.h defines the enum to manipulate it.
+ */
+/*#define LIBM_LIB_VERSION /**/
+
+/* HAS_MADVISE:
+ * This symbol, if defined, indicates that the madvise system call is
+ * available to map a file into memory.
+ */
+/*#define HAS_MADVISE /**/
+
+/* HAS_MALLOC_SIZE:
+ * This symbol, if defined, indicates that the malloc_size
+ * routine is available for use.
+ */
+/*#define HAS_MALLOC_SIZE /**/
+
+/* HAS_MALLOC_GOOD_SIZE:
+ * This symbol, if defined, indicates that the malloc_good_size
+ * routine is available for use.
+ */
+/*#define HAS_MALLOC_GOOD_SIZE /**/
+
+/* HAS_MKDTEMP:
+ * This symbol, if defined, indicates that the mkdtemp routine is
+ * available to exclusively create a uniquely named temporary directory.
+ */
+/*#define HAS_MKDTEMP /**/
+
+/* HAS_MKSTEMPS:
+ * This symbol, if defined, indicates that the mkstemps routine is
+ * available to excluslvely create and open a uniquely named
+ * (with a suffix) temporary file.
+ */
+/*#define HAS_MKSTEMPS /**/
+
+/* HAS_MODFL:
+ * This symbol, if defined, indicates that the modfl routine is
+ * available to split a long double x into a fractional part f and
+ * an integer part i such that |f| < 1.0 and (f + i) = x.
+ */
+/* HAS_MODFL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the modfl() function. Otherwise, it is up
+ * to the program to supply one.
+ */
+/* HAS_MODFL_POW32_BUG:
+ * This symbol, if defined, indicates that the modfl routine is
+ * broken for long doubles >= pow(2, 32).
+ * For example from 4294967303.150000 one would get 4294967302.000000
+ * and 1.150000. The bug has been seen in certain versions of glibc,
+ * release 2.2.2 is known to be okay.
+ */
+/*#define HAS_MODFL /**/
+/*#define HAS_MODFL_PROTO /**/
+/*#define HAS_MODFL_POW32_BUG /**/
-/* CSH:
- * This symbol, if defined, contains the full pathname of csh.
+/* HAS_MPROTECT:
+ * This symbol, if defined, indicates that the mprotect system call is
+ * available to modify the access protection of a memory mapped file.
*/
-/*#define HAS_CSH /**/
-#ifdef HAS_CSH
-#define CSH "" /**/
-#endif
+/*#define HAS_MPROTECT /**/
-/* HAS_ENDHOSTENT:
- * This symbol, if defined, indicates that the endhostent() routine is
- * available to close whatever was being used for host queries.
+/* HAS_STRUCT_MSGHDR:
+ * This symbol, if defined, indicates that the struct msghdr
+ * is supported.
*/
-/*#define HAS_ENDHOSTENT /**/
+/*#define HAS_STRUCT_MSGHDR /**/
-/* HAS_ENDNETENT:
- * This symbol, if defined, indicates that the endnetent() routine is
- * available to close whatever was being used for network queries.
+/* HAS_NL_LANGINFO:
+ * This symbol, if defined, indicates that the nl_langinfo routine is
+ * available to return local data. You will also need <langinfo.h>
+ * and therefore I_LANGINFO.
*/
-/*#define HAS_ENDNETENT /**/
+/*#define HAS_NL_LANGINFO /**/
-/* HAS_ENDPROTOENT:
- * This symbol, if defined, indicates that the endprotoent() routine is
- * available to close whatever was being used for protocol queries.
+/* HAS_OFF64_T:
+ * This symbol will be defined if the C compiler supports off64_t.
*/
-/*#define HAS_ENDPROTOENT /**/
+/*#define HAS_OFF64_T /**/
-/* HAS_ENDSERVENT:
- * This symbol, if defined, indicates that the endservent() routine is
- * available to close whatever was being used for service queries.
+/* HAS_PROCSELFEXE:
+ * This symbol is defined if PROCSELFEXE_PATH is a symlink
+ * to the absolute pathname of the executing program.
*/
-/*#define HAS_ENDSERVENT /**/
+/* PROCSELFEXE_PATH:
+ * If HAS_PROCSELFEXE is defined this symbol is the filename
+ * of the symbolic link pointing to the absolute pathname of
+ * the executing program.
+ */
+/*#define HAS_PROCSELFEXE /**/
+#if defined(HAS_PROCSELFEXE) && !defined(PROCSELFEXE_PATH)
+#define PROCSELFEXE_PATH /**/
+#endif
-/* HAS_GETHOSTBYADDR:
- * This symbol, if defined, indicates that the gethostbyaddr() routine is
- * available to look up hosts by their IP addresses.
+/* HAS_PTHREAD_ATTR_SETSCOPE:
+ * This symbol, if defined, indicates that the pthread_attr_setscope
+ * system call is available to set the contention scope attribute of
+ * a thread attribute object.
*/
-#define HAS_GETHOSTBYADDR /**/
+/*#define HAS_PTHREAD_ATTR_SETSCOPE /**/
-/* HAS_GETHOSTBYNAME:
- * This symbol, if defined, indicates that the gethostbyname() routine is
- * available to look up host names in some data base or other.
+/* HAS_READV:
+ * This symbol, if defined, indicates that the readv routine is
+ * available to do gather reads. You will also need <sys/uio.h>
+ * and there I_SYSUIO.
*/
-#define HAS_GETHOSTBYNAME /**/
+/*#define HAS_READV /**/
-/* HAS_GETHOSTENT:
- * This symbol, if defined, indicates that the gethostent() routine is
- * available to look up host names in some data base or another.
+/* HAS_RECVMSG:
+ * This symbol, if defined, indicates that the recvmsg routine is
+ * available to send structured socket messages.
*/
-/*#define HAS_GETHOSTENT /**/
+/*#define HAS_RECVMSG /**/
-/* HAS_GETNETBYADDR:
- * This symbol, if defined, indicates that the getnetbyaddr() routine is
- * available to look up networks by their IP addresses.
+/* HAS_SBRK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sbrk() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern void* sbrk(int);
+ * extern void* sbrk(size_t);
*/
-/*#define HAS_GETNETBYADDR /**/
+/*#define HAS_SBRK_PROTO /**/
-/* HAS_GETNETBYNAME:
- * This symbol, if defined, indicates that the getnetbyname() routine is
- * available to look up networks by their names.
+/* HAS_SCALBNL:
+ * This symbol, if defined, indicates that the scalbnl routine is
+ * available. If ilogbl is also present we can emulate frexpl.
*/
-/*#define HAS_GETNETBYNAME /**/
+/*#define HAS_SCALBNL /**/
-/* HAS_GETNETENT:
- * This symbol, if defined, indicates that the getnetent() routine is
- * available to look up network names in some data base or another.
+/* HAS_SENDMSG:
+ * This symbol, if defined, indicates that the sendmsg routine is
+ * available to send structured socket messages.
*/
-/*#define HAS_GETNETENT /**/
+/*#define HAS_SENDMSG /**/
-/* HAS_GETPROTOENT:
- * This symbol, if defined, indicates that the getprotoent() routine is
- * available to look up protocols in some data base or another.
+/* HAS_SETITIMER:
+ * This symbol, if defined, indicates that the setitimer routine is
+ * available to set interval timers.
*/
-/*#define HAS_GETPROTOENT /**/
+/*#define HAS_SETITIMER /**/
-/* HAS_GETPROTOBYNAME:
- * This symbol, if defined, indicates that the getprotobyname()
- * routine is available to look up protocols by their name.
+/* HAS_SETPROCTITLE:
+ * This symbol, if defined, indicates that the setproctitle routine is
+ * available to set process title.
*/
-/* HAS_GETPROTOBYNUMBER:
- * This symbol, if defined, indicates that the getprotobynumber()
- * routine is available to look up protocols by their number.
+/*#define HAS_SETPROCTITLE /**/
+
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
*/
-#define HAS_GETPROTOBYNAME /**/
-#define HAS_GETPROTOBYNUMBER /**/
+/*#define USE_SFIO /**/
-/* HAS_GETSERVENT:
- * This symbol, if defined, indicates that the getservent() routine is
- * available to look up network services in some data base or another.
+/* HAS_SIGNBIT:
+ * This symbol, if defined, indicates that the signbit routine is
+ * available to check if the given number has the sign bit set.
+ * This should include correct testing of -0.0. This will only be set
+ * if the signbit() routine is safe to use with the NV type used internally
+ * in perl. Users should call Perl_signbit(), which will be #defined to
+ * the system's signbit() function or macro if this symbol is defined.
*/
-/*#define HAS_GETSERVENT /**/
+/*#define HAS_SIGNBIT /**/
-/* HAS_GETSERVBYNAME:
- * This symbol, if defined, indicates that the getservbyname()
- * routine is available to look up services by their name.
+/* HAS_SIGPROCMASK:
+ * This symbol, if defined, indicates that the sigprocmask
+ * system call is available to examine or change the signal mask
+ * of the calling process.
*/
-/* HAS_GETSERVBYPORT:
- * This symbol, if defined, indicates that the getservbyport()
- * routine is available to look up services by their port.
+/*#define HAS_SIGPROCMASK /**/
+
+/* USE_SITECUSTOMIZE:
+ * This symbol, if defined, indicates that sitecustomize should
+ * be used.
*/
-#define HAS_GETSERVBYNAME /**/
-#define HAS_GETSERVBYPORT /**/
+#ifndef USE_SITECUSTOMIZE
+/*#define USE_SITECUSTOMIZE /**/
+#endif
-/* HAS_LONG_DOUBLE:
- * This symbol will be defined if the C compiler supports long
- * doubles.
+/* HAS_SNPRINTF:
+ * This symbol, if defined, indicates that the snprintf () library
+ * function is available for use.
*/
-/* LONG_DOUBLESIZE:
- * This symbol contains the size of a long double, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long doubles.
+/* HAS_VSNPRINTF:
+ * This symbol, if defined, indicates that the vsnprintf () library
+ * function is available for use.
*/
-#define HAS_LONG_DOUBLE /**/
-#ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE 12 /**/
-#endif
+#define HAS_SNPRINTF /**/
+#define HAS_VSNPRINTF /**/
-/* HAS_LONG_LONG:
- * This symbol will be defined if the C compiler supports
- * long long.
+/* HAS_SOCKATMARK:
+ * This symbol, if defined, indicates that the sockatmark routine is
+ * available to test whether a socket is at the out-of-band mark.
*/
-/* LONGLONGSIZE:
- * This symbol contains the size of a long long, so that the
- * C preprocessor can make decisions based on it. It is only
- * defined if the system supports long long.
+/*#define HAS_SOCKATMARK /**/
+
+/* HAS_SOCKATMARK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sockatmark() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int sockatmark(int);
*/
-/*#define HAS_LONG_LONG /**/
-#ifdef HAS_LONG_LONG
-#define LONGLONGSIZE 8 /**/
-#endif
+/*#define HAS_SOCKATMARK_PROTO /**/
-/* HAS_SETGROUPS:
- * This symbol, if defined, indicates that the setgroups() routine is
- * available to set the list of process groups. If unavailable, multiple
- * groups are probably not supported.
+/* HAS_SOCKS5_INIT:
+ * This symbol, if defined, indicates that the socks5_init routine is
+ * available to initialize SOCKS 5.
*/
-/*#define HAS_SETGROUPS /**/
+/*#define HAS_SOCKS5_INIT /**/
-/* HAS_SETHOSTENT:
- * This symbol, if defined, indicates that the sethostent() routine is
- * available.
+/* SPRINTF_RETURNS_STRLEN:
+ * This variable defines whether sprintf returns the length of the string
+ * (as per the ANSI spec). Some C libraries retain compatibility with
+ * pre-ANSI C and return a pointer to the passed in buffer; for these
+ * this variable will be undef.
*/
-/*#define HAS_SETHOSTENT /**/
+#define SPRINTF_RETURNS_STRLEN /**/
-/* HAS_SETNETENT:
- * This symbol, if defined, indicates that the setnetent() routine is
- * available.
+/* HAS_SQRTL:
+ * This symbol, if defined, indicates that the sqrtl routine is
+ * available to do long double square roots.
*/
-/*#define HAS_SETNETENT /**/
+/*#define HAS_SQRTL /**/
-/* HAS_SETPROTOENT:
- * This symbol, if defined, indicates that the setprotoent() routine is
- * available.
+/* HAS_SETRESGID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresgid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid);
*/
-/*#define HAS_SETPROTOENT /**/
+/*#define HAS_SETRESGID_PROTO /**/
-/* HAS_SETSERVENT:
- * This symbol, if defined, indicates that the setservent() routine is
- * available.
+/* HAS_SETRESUID_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the setresuid() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid);
*/
-/*#define HAS_SETSERVENT /**/
+/*#define HAS_SETRESUID_PROTO /**/
-/* HAS_SETVBUF:
- * This symbol, if defined, indicates that the setvbuf routine is
- * available to change buffering on an open stdio stream.
- * to a line-buffered mode.
+/* HAS_STRUCT_STATFS_F_FLAGS:
+ * This symbol, if defined, indicates that the struct statfs
+ * does have the f_flags member containing the mount flags of
+ * the filesystem containing the file.
+ * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3),
+ * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not
+ * have statfs() and struct statfs, they have ustat() and getmnt()
+ * with struct ustat and struct fs_data.
*/
-#define HAS_SETVBUF /**/
+/*#define HAS_STRUCT_STATFS_F_FLAGS /**/
-/* HAS_SOCKET:
- * This symbol, if defined, indicates that the BSD socket interface is
- * supported.
+/* HAS_STRUCT_STATFS:
+ * This symbol, if defined, indicates that the struct statfs
+ * to do statfs() is supported.
*/
-/* HAS_SOCKETPAIR:
- * This symbol, if defined, indicates that the BSD socketpair() call is
- * supported.
+/*#define HAS_STRUCT_STATFS /**/
+
+/* HAS_FSTATVFS:
+ * This symbol, if defined, indicates that the fstatvfs routine is
+ * available to stat filesystems by file descriptors.
*/
-#define HAS_SOCKET /**/
-/*#define HAS_SOCKETPAIR /**/
+/*#define HAS_FSTATVFS /**/
-/* HAS_UNION_SEMUN:
- * This symbol, if defined, indicates that the union semun is
- * defined by including <sys/sem.h>. If not, the user code
- * probably needs to define it as:
- * union semun {
- * int val;
- * struct semid_ds *buf;
- * unsigned short *array;
- * }
+/* HAS_STRFTIME:
+ * This symbol, if defined, indicates that the strftime routine is
+ * available to do time formatting.
*/
-/* USE_SEMCTL_SEMUN:
- * This symbol, if defined, indicates that union semun is
- * used for semctl IPC_STAT.
+#define HAS_STRFTIME /**/
+
+/* HAS_STRLCAT:
+ * This symbol, if defined, indicates that the strlcat () routine is
+ * available to do string concatenation.
*/
-/* USE_SEMCTL_SEMID_DS:
- * This symbol, if defined, indicates that struct semid_ds * is
- * used for semctl IPC_STAT.
+/*#define HAS_STRLCAT /**/
+
+/* HAS_STRLCPY:
+ * This symbol, if defined, indicates that the strlcpy () routine is
+ * available to do string copying.
*/
-#define HAS_UNION_SEMUN /**/
-/*#define USE_SEMCTL_SEMUN /**/
-/*#define USE_SEMCTL_SEMID_DS /**/
+/*#define HAS_STRLCPY /**/
-/* Signal_t:
- * This symbol's value is either "void" or "int", corresponding to the
- * appropriate return type of a signal handler. Thus, you can declare
- * a signal handler using "Signal_t (*handler)()", and define the
- * handler using "Signal_t handler(sig)".
+/* HAS_STRTOLD:
+ * This symbol, if defined, indicates that the strtold routine is
+ * available to convert strings to long doubles.
*/
-#define Signal_t void /* Signal handler's return type */
+/*#define HAS_STRTOLD /**/
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups() and setgropus(). Usually, this is the same as
- * gidtype (gid_t) , but sometimes it isn't.
- * It can be int, ushort, uid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups() or setgropus()..
+/* HAS_STRTOLL:
+ * This symbol, if defined, indicates that the strtoll routine is
+ * available to convert strings to long longs.
*/
-#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
-#endif
+/*#define HAS_STRTOLL /**/
-/* I_NETDB:
- * This symbol, if defined, indicates that <netdb.h> exists and
- * should be included.
+/* HAS_STRTOQ:
+ * This symbol, if defined, indicates that the strtoq routine is
+ * available to convert strings to long longs (quads).
*/
-/*#define I_NETDB /**/
+/*#define HAS_STRTOQ /**/
-/* I_PWD:
- * This symbol, if defined, indicates to the C program that it should
- * include <pwd.h>.
+/* HAS_STRTOULL:
+ * This symbol, if defined, indicates that the strtoull routine is
+ * available to convert strings to unsigned long longs.
*/
-/* PWQUOTA:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_quota.
+/*#define HAS_STRTOULL /**/
+
+/* HAS_STRTOUQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to unsigned long longs (quads).
*/
-/* PWAGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_age.
+/*#define HAS_STRTOUQ /**/
+
+/* HAS_SYSCALL_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the syscall() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern int syscall(int, ...);
+ * extern int syscall(long, ...);
*/
-/* PWCHANGE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_change.
+/*#define HAS_SYSCALL_PROTO /**/
+
+/* HAS_TELLDIR_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the telldir() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern long telldir(DIR*);
*/
-/* PWCLASS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_class.
+#define HAS_TELLDIR_PROTO /**/
+
+/* HAS_CTIME64:
+ * This symbol, if defined, indicates that the ctime64 () routine is
+ * available to do the 64bit variant of ctime ()
*/
-/* PWEXPIRE:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_expire.
+/* HAS_LOCALTIME64:
+ * This symbol, if defined, indicates that the localtime64 () routine is
+ * available to do the 64bit variant of localtime ()
*/
-/* PWCOMMENT:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_comment.
+/* HAS_GMTIME64:
+ * This symbol, if defined, indicates that the gmtime64 () routine is
+ * available to do the 64bit variant of gmtime ()
*/
-/* PWGECOS:
- * This symbol, if defined, indicates to the C program that struct passwd
- * contains pw_gecos.
+/* HAS_MKTIME64:
+ * This symbol, if defined, indicates that the mktime64 () routine is
+ * available to do the 64bit variant of mktime ()
*/
-/*#define I_PWD /**/
-/*#define PWQUOTA /**/
-/*#define PWAGE /**/
-/*#define PWCHANGE /**/
-/*#define PWCLASS /**/
-/*#define PWEXPIRE /**/
-/*#define PWCOMMENT /**/
-/*#define PWGECOS /**/
-
-/* PRIVLIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
+/* HAS_DIFFTIME64:
+ * This symbol, if defined, indicates that the difftime64 () routine is
+ * available to do the 64bit variant of difftime ()
*/
-/* PRIVLIB_EXP:
- * This symbol contains the ~name expanded version of PRIVLIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/* HAS_ASCTIME64:
+ * This symbol, if defined, indicates that the asctime64 () routine is
+ * available to do the 64bit variant of asctime ()
*/
-#define PRIVLIB "c:\\perl.gcc\\5.00467\\lib" /**/
-#define PRIVLIB_EXP (win32_get_privlib("5.00467")) /**/
+/*#define HAS_CTIME64 /**/
+/*#define HAS_LOCALTIME64 /**/
+/*#define HAS_GMTIME64 /**/
+/*#define HAS_MKTIME64 /**/
+/*#define HAS_DIFFTIME64 /**/
+/*#define HAS_ASCTIME64 /**/
-/* SIG_NAME:
- * This symbol contains a list of signal names in order of
- * signal number. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
- * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn,
- * etc., where nn is the actual signal number (e.g. NUM37).
- * The signal number for sig_name[i] is stored in sig_num[i].
- * The last element is 0 to terminate the list with a NULL. This
- * corresponds to the 0 at the end of the sig_num list.
- */
-/* SIG_NUM:
- * This symbol contains a list of signal numbers, in the same order as the
- * SIG_NAME list. It is suitable for static array initialization, as in:
- * int sig_num[] = { SIG_NUM };
- * The signals in the list are separated with commas, and the indices
- * within that list and the SIG_NAME list match, so it's easy to compute
- * the signal name from a number or vice versa at the price of a small
- * dynamic linear lookup.
- * Duplicates are allowed, but are moved to the end of the list.
- * The signal number corresponding to sig_name[i] is sig_number[i].
- * if (i < NSIG) then sig_number[i] == i.
- * The last element is 0, corresponding to the 0 at the end of
- * the sig_name list.
+/* HAS_TIMEGM:
+ * This symbol, if defined, indicates that the timegm routine is
+ * available to do the opposite of gmtime ()
*/
-#define SIG_NAME "ZERO", "INT", "QUIT", "ILL", "FPE", "KILL", "SEGV", "PIPE", "ALRM", "TERM", "CHLD", "BREAK", "ABRT", "STOP", "CONT", "CLD", 0 /**/
-#define SIG_NUM 0, 2, 3, 4, 8, 9, 11, 13, 14, 15, 20, 21, 22, 23, 25, 20, 0 /**/
+/*#define HAS_TIMEGM /**/
-/* SITEARCH:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * Individual sites may place their own extensions and modules in
- * this directory.
+/* U32_ALIGNMENT_REQUIRED:
+ * This symbol, if defined, indicates that you must access
+ * character data through U32-aligned pointers.
*/
-/* SITEARCH_EXP:
- * This symbol contains the ~name expanded version of SITEARCH, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+#ifndef U32_ALIGNMENT_REQUIRED
+#define U32_ALIGNMENT_REQUIRED /**/
+#endif
+
+/* HAS_UALARM:
+ * This symbol, if defined, indicates that the ualarm routine is
+ * available to do alarms with microsecond granularity.
*/
-#define SITEARCH "c:\\perl.gcc\\site\\5.00467\\lib\\MSWin32-x86" /**/
-/*#define SITEARCH_EXP "" /**/
+/*#define HAS_UALARM /**/
-/* SITELIB:
- * This symbol contains the name of the private library for this package.
- * The library is private in the sense that it needn't be in anyone's
- * execution path, but it should be accessible by the world. The program
- * should be prepared to do ~ expansion.
- * The standard distribution will put nothing in this directory.
- * Individual sites may place their own extensions and modules in
- * this directory.
+/* HAS_UNORDERED:
+ * This symbol, if defined, indicates that the unordered routine is
+ * available to check whether two doubles are unordered
+ * (effectively: whether either of them is NaN)
+ */
+/*#define HAS_UNORDERED /**/
+
+/* HAS_UNSETENV:
+ * This symbol, if defined, indicates that the unsetenv () routine is
+ * available for use.
*/
-/* SITELIB_EXP:
- * This symbol contains the ~name expanded version of SITELIB, to be used
- * in programs that are not prepared to deal with ~ expansion at run-time.
+/*#define HAS_UNSETENV /**/
+
+/* HAS_USLEEP_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the usleep() function. Otherwise, it is up
+ * to the program to supply one. A good guess is
+ * extern int usleep(useconds_t);
*/
-#define SITELIB "c:\\perl.gcc\\site\\5.00467\\lib" /**/
-#define SITELIB_EXP (win32_get_sitelib("5.00467")) /**/
+/*#define HAS_USLEEP_PROTO /**/
-/* DLSYM_NEEDS_UNDERSCORE:
- * This symbol, if defined, indicates that we need to prepend an
- * underscore to the symbol name before calling dlsym(). This only
- * makes sense if you *have* dlsym, which we will presume is the
- * case if you're using dl_dlopen.xs.
+/* HAS_USTAT:
+ * This symbol, if defined, indicates that the ustat system call is
+ * available to query file system statistics by dev_t.
*/
-/*#define DLSYM_NEEDS_UNDERSCORE /**/
+/*#define HAS_USTAT /**/
-/* USE_SFIO:
- * This symbol, if defined, indicates that sfio should
- * be used.
+/* HAS_WRITEV:
+ * This symbol, if defined, indicates that the writev routine is
+ * available to do scatter writes.
*/
-/*#define USE_SFIO /**/
+/*#define HAS_WRITEV /**/
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
*/
#define USE_DYNAMIC_LOADING /**/
+/* FFLUSH_NULL:
+ * This symbol, if defined, tells that fflush(NULL) does flush
+ * all pending stdio output.
+ */
+/* FFLUSH_ALL:
+ * This symbol, if defined, tells that to flush
+ * all pending stdio output one must loop through all
+ * the stdio file handles stored in an array and fflush them.
+ * Note that if fflushNULL is defined, fflushall will not
+ * even be probed for and will be left undefined.
+ */
+#define FFLUSH_NULL /**/
+/*#define FFLUSH_ALL /**/
+
+/* I_ASSERT:
+ * This symbol, if defined, indicates that <assert.h> exists and
+ * could be included by the C program to get the assert() macro.
+ */
+#define I_ASSERT /**/
+
+/* I_CRYPT:
+ * This symbol, if defined, indicates that <crypt.h> exists and
+ * should be included.
+ */
+/*#define I_CRYPT /**/
+
/* DB_Prefix_t:
* This symbol contains the type of the prefix structure element
* in the <db.h> header file. In older versions of DB, it was
* in the <db.h> header file. In older versions of DB, it was
* int, while in newer ones it is size_t.
*/
+/* DB_VERSION_MAJOR_CFG:
+ * This symbol, if defined, defines the major version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ */
+/* DB_VERSION_MINOR_CFG:
+ * This symbol, if defined, defines the minor version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
+/* DB_VERSION_PATCH_CFG:
+ * This symbol, if defined, defines the patch version number of
+ * Berkeley DB found in the <db.h> header when Perl was configured.
+ * For DB version 1 this is always 0.
+ */
#define DB_Hash_t int /**/
#define DB_Prefix_t int /**/
+#define DB_VERSION_MAJOR_CFG 0 /**/
+#define DB_VERSION_MINOR_CFG 0 /**/
+#define DB_VERSION_PATCH_CFG 0 /**/
-/* STARTPERL:
- * This variable contains the string to put in front of a perl
- * script to make sure (one hopes) that it runs with perl and not
- * some shell.
+/* I_FP:
+ * This symbol, if defined, indicates that <fp.h> exists and
+ * should be included.
*/
-#define STARTPERL "#!perl" /**/
+/*#define I_FP /**/
-/* USE_PERLIO:
- * This symbol, if defined, indicates that the PerlIO abstraction should
- * be used throughout. If not defined, stdio should be
- * used in a fully backward compatible manner.
+/* I_FP_CLASS:
+ * This symbol, if defined, indicates that <fp_class.h> exists and
+ * should be included.
*/
-/*#define USE_PERLIO /**/
+/*#define I_FP_CLASS /**/
-/* HAS_GETHOST_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for gethostent(), gethostbyname(), and
- * gethostbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* I_IEEEFP:
+ * This symbol, if defined, indicates that <ieeefp.h> exists and
+ * should be included.
*/
-#define HAS_GETHOST_PROTOS /**/
+/*#define I_IEEEFP /**/
-/* HAS_GETNET_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getnetent(), getnetbyname(), and
- * getnetbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* I_INTTYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <inttypes.h>.
*/
-/*#define HAS_GETNET_PROTOS /**/
+/*#define I_INTTYPES /**/
-/* HAS_GETPROTO_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getprotoent(), getprotobyname(), and
- * getprotobyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* I_LANGINFO:
+ * This symbol, if defined, indicates that <langinfo.h> exists and
+ * should be included.
*/
-#define HAS_GETPROTO_PROTOS /**/
+/*#define I_LANGINFO /**/
-/* HAS_GETSERV_PROTOS:
- * This symbol, if defined, indicates that <netdb.h> includes
- * prototypes for getservent(), getservbyname(), and
- * getservbyaddr(). Otherwise, it is up to the program to guess
- * them. See netdbtype.U for probing for various Netdb_xxx_t types.
+/* I_LIBUTIL:
+ * This symbol, if defined, indicates that <libutil.h> exists and
+ * should be included.
*/
-#define HAS_GETSERV_PROTOS /**/
+/*#define I_LIBUTIL /**/
-/* Netdb_host_t:
- * This symbol holds the type used for the 1st argument
- * to gethostbyaddr().
+/* I_MALLOCMALLOC:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <malloc/malloc.h>.
*/
-/* Netdb_hlen_t:
- * This symbol holds the type used for the 2nd argument
- * to gethostbyaddr().
+/*#define I_MALLOCMALLOC /**/
+
+/* I_MNTENT:
+ * This symbol, if defined, indicates that <mntent.h> exists and
+ * should be included.
*/
-/* Netdb_name_t:
- * This symbol holds the type used for the argument to
- * gethostbyname().
+/*#define I_MNTENT /**/
+
+/* I_NETINET_TCP:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <netinet/tcp.h>.
*/
-/* Netdb_net_t:
- * This symbol holds the type used for the 1st argument to
- * getnetbyaddr().
+/*#define I_NETINET_TCP /**/
+
+/* I_POLL:
+ * This symbol, if defined, indicates that <poll.h> exists and
+ * should be included. (see also HAS_POLL)
*/
-#define Netdb_host_t char * /**/
-#define Netdb_hlen_t int /**/
-#define Netdb_name_t char * /**/
-#define Netdb_net_t long /**/
+/*#define I_POLL /**/
-/* Select_fd_set_t:
- * This symbol holds the type used for the 2nd, 3rd, and 4th
- * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET
- * is defined, and 'int *' otherwise. This is only useful if you
- * have select(), of course.
+/* I_PROT:
+ * This symbol, if defined, indicates that <prot.h> exists and
+ * should be included.
*/
-#define Select_fd_set_t Perl_fd_set * /**/
+/*#define I_PROT /**/
-/* ARCHNAME:
- * This symbol holds a string representing the architecture name.
- * It may be used to construct an architecture-dependant pathname
- * where library files may be held under a private library, for
- * instance.
+/* I_SHADOW:
+ * This symbol, if defined, indicates that <shadow.h> exists and
+ * should be included.
*/
-#define ARCHNAME "MSWin32-x86" /**/
+/*#define I_SHADOW /**/
-/* HAS_PTHREAD_YIELD:
- * This symbol, if defined, indicates that the pthread_yield
- * routine is available to yield the execution of the current
- * thread.
+/* I_SOCKS:
+ * This symbol, if defined, indicates that <socks.h> exists and
+ * should be included.
*/
-/* HAS_SCHED_YIELD:
- * This symbol, if defined, indicates that the sched_yield
- * routine is available to yield the execution of the current
- * thread.
+/*#define I_SOCKS /**/
+
+/* I_SUNMATH:
+ * This symbol, if defined, indicates that <sunmath.h> exists and
+ * should be included.
*/
-/*#define HAS_PTHREAD_YIELD /**/
-/*#define HAS_SCHED_YIELD /**/
+/*#define I_SUNMATH /**/
-/* PTHREADS_CREATED_JOINABLE:
- * This symbol, if defined, indicates that pthreads are created
- * in the joinable (aka undetached) state.
+/* I_SYSLOG:
+ * This symbol, if defined, indicates that <syslog.h> exists and
+ * should be included.
*/
-/*#define PTHREADS_CREATED_JOINABLE /**/
+/*#define I_SYSLOG /**/
-/* USE_THREADS:
- * This symbol, if defined, indicates that Perl should
- * be built to use threads.
+/* I_SYSMODE:
+ * This symbol, if defined, indicates that <sys/mode.h> exists and
+ * should be included.
*/
-/* OLD_PTHREADS_API:
- * This symbol, if defined, indicates that Perl should
- * be built to use the old draft POSIX threads API.
+/*#define I_SYSMODE /**/
+
+/* I_SYS_MOUNT:
+ * This symbol, if defined, indicates that <sys/mount.h> exists and
+ * should be included.
*/
-/*#define USE_THREADS /**/
-/*#define OLD_PTHREADS_API /**/
+/*#define I_SYS_MOUNT /**/
-/* Time_t:
- * This symbol holds the type returned by time(). It can be long,
- * or time_t on BSD sites (in which case <sys/types.h> should be
- * included).
+/* I_SYS_STATFS:
+ * This symbol, if defined, indicates that <sys/statfs.h> exists.
*/
-#define Time_t time_t /* Time type */
+/*#define I_SYS_STATFS /**/
-/* HAS_TIMES:
- * This symbol, if defined, indicates that the times() routine exists.
- * Note that this became obsolete on some systems (SUNOS), which now
- * use getrusage(). It may be necessary to include <sys/times.h>.
+/* I_SYS_STATVFS:
+ * This symbol, if defined, indicates that <sys/statvfs.h> exists and
+ * should be included.
*/
-#define HAS_TIMES /**/
+/*#define I_SYS_STATVFS /**/
-/* Fpos_t:
- * This symbol holds the type used to declare file positions in libc.
- * It can be fpos_t, long, uint, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* I_SYSUTSNAME:
+ * This symbol, if defined, indicates that <sys/utsname.h> exists and
+ * should be included.
*/
-#define Fpos_t fpos_t /* File position type */
+/*#define I_SYSUTSNAME /**/
-/* Gid_t:
- * This symbol holds the return type of getgid() and the type of
- * argument to setrgid() and related functions. Typically,
- * it is the type of group ids in the kernel. It can be int, ushort,
- * uid_t, etc... It may be necessary to include <sys/types.h> to get
- * any typedef'ed information.
+/* I_SYS_VFS:
+ * This symbol, if defined, indicates that <sys/vfs.h> exists and
+ * should be included.
*/
-#define Gid_t gid_t /* Type for getgid(), etc... */
+/*#define I_SYS_VFS /**/
-/* Off_t:
- * This symbol holds the type used to declare offsets in the kernel.
- * It can be int, long, off_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* I_USTAT:
+ * This symbol, if defined, indicates that <ustat.h> exists and
+ * should be included.
*/
-#define Off_t off_t /* <offset> type */
+/*#define I_USTAT /**/
-/* Mode_t:
- * This symbol holds the type used to declare file modes
- * for systems calls. It is usually mode_t, but may be
- * int or unsigned short. It may be necessary to include <sys/types.h>
- * to get any typedef'ed information.
+/* PERL_PRIfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for output.
*/
-#define Mode_t mode_t /* file mode parameter for system calls */
+/* PERL_PRIgldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'g') for output.
+ */
+/* PERL_PRIeldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'e') for output.
+ */
+/* PERL_SCNfldbl:
+ * This symbol, if defined, contains the string used by stdio to
+ * format long doubles (format 'f') for input.
+ */
+/*#define PERL_PRIfldbl "f" /**/
+/*#define PERL_PRIgldbl "g" /**/
+/*#define PERL_PRIeldbl "e" /**/
+/*#define PERL_SCNfldbl "f" /**/
-/* Pid_t:
- * This symbol holds the type used to declare process ids in the kernel.
- * It can be int, uint, pid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* PERL_MAD:
+ * This symbol, if defined, indicates that the Misc Attribution
+ * Declaration code should be conditionally compiled.
*/
-#define Pid_t int /* PID type */
+/*#define PERL_MAD /**/
-/* Size_t:
- * This symbol holds the type used to declare length parameters
- * for string functions. It is usually size_t, but may be
- * unsigned long, int, etc. It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* NEED_VA_COPY:
+ * This symbol, if defined, indicates that the system stores
+ * the variable argument list datatype, va_list, in a format
+ * that cannot be copied by simple assignment, so that some
+ * other means must be used when copying is required.
+ * As such systems vary in their provision (or non-provision)
+ * of copying mechanisms, handy.h defines a platform-
+ * independent macro, Perl_va_copy(src, dst), to do the job.
*/
-#define Size_t size_t /* length paramater for string functions */
+/*#define NEED_VA_COPY /**/
-/* Uid_t:
- * This symbol holds the type used to declare user ids in the kernel.
- * It can be int, ushort, uid_t, etc... It may be necessary to include
- * <sys/types.h> to get any typedef'ed information.
+/* IVTYPE:
+ * This symbol defines the C type used for Perl's IV.
*/
-#define Uid_t uid_t /* UID type */
+/* UVTYPE:
+ * This symbol defines the C type used for Perl's UV.
+ */
+/* I8TYPE:
+ * This symbol defines the C type used for Perl's I8.
+ */
+/* U8TYPE:
+ * This symbol defines the C type used for Perl's U8.
+ */
+/* I16TYPE:
+ * This symbol defines the C type used for Perl's I16.
+ */
+/* U16TYPE:
+ * This symbol defines the C type used for Perl's U16.
+ */
+/* I32TYPE:
+ * This symbol defines the C type used for Perl's I32.
+ */
+/* U32TYPE:
+ * This symbol defines the C type used for Perl's U32.
+ */
+/* I64TYPE:
+ * This symbol defines the C type used for Perl's I64.
+ */
+/* U64TYPE:
+ * This symbol defines the C type used for Perl's U64.
+ */
+/* NVTYPE:
+ * This symbol defines the C type used for Perl's NV.
+ */
+/* IVSIZE:
+ * This symbol contains the sizeof(IV).
+ */
+/* UVSIZE:
+ * This symbol contains the sizeof(UV).
+ */
+/* I8SIZE:
+ * This symbol contains the sizeof(I8).
+ */
+/* U8SIZE:
+ * This symbol contains the sizeof(U8).
+ */
+/* I16SIZE:
+ * This symbol contains the sizeof(I16).
+ */
+/* U16SIZE:
+ * This symbol contains the sizeof(U16).
+ */
+/* I32SIZE:
+ * This symbol contains the sizeof(I32).
+ */
+/* U32SIZE:
+ * This symbol contains the sizeof(U32).
+ */
+/* I64SIZE:
+ * This symbol contains the sizeof(I64).
+ */
+/* U64SIZE:
+ * This symbol contains the sizeof(U64).
+ */
+/* NVSIZE:
+ * This symbol contains the sizeof(NV).
+ */
+/* NV_PRESERVES_UV:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * can preserve all the bits of a variable of type UVTYPE.
+ */
+/* NV_PRESERVES_UV_BITS:
+ * This symbol contains the number of bits a variable of type NVTYPE
+ * can preserve of a variable of type UVTYPE.
+ */
+/* NV_OVERFLOWS_INTEGERS_AT:
+ * This symbol gives the largest integer value that NVs can hold. This
+ * value + 1.0 cannot be stored accurately. It is expressed as constant
+ * floating point expression to reduce the chance of decimale/binary
+ * conversion issues. If it can not be determined, the value 0 is given.
+ */
+/* NV_ZERO_IS_ALLBITS_ZERO:
+ * This symbol, if defined, indicates that a variable of type NVTYPE
+ * stores 0.0 in memory as all bits zero.
+ */
+#define IVTYPE long /**/
+#define UVTYPE unsigned long /**/
+#define I8TYPE char /**/
+#define U8TYPE unsigned char /**/
+#define I16TYPE short /**/
+#define U16TYPE unsigned short /**/
+#define I32TYPE long /**/
+#define U32TYPE unsigned long /**/
+#ifdef HAS_QUAD
+# ifndef _MSC_VER
+# define I64TYPE long long /**/
+# define U64TYPE unsigned long long /**/
+# else
+# define I64TYPE __int64 /**/
+# define U64TYPE unsigned __int64 /**/
+# endif
+#endif
+#define NVTYPE double /**/
+#define IVSIZE 4 /**/
+#define UVSIZE 4 /**/
+#define I8SIZE 1 /**/
+#define U8SIZE 1 /**/
+#define I16SIZE 2 /**/
+#define U16SIZE 2 /**/
+#define I32SIZE 4 /**/
+#define U32SIZE 4 /**/
+#ifdef HAS_QUAD
+#define I64SIZE 8 /**/
+#define U64SIZE 8 /**/
+#endif
+#define NVSIZE 8 /**/
+#define NV_PRESERVES_UV
+#define NV_PRESERVES_UV_BITS 32
+#define NV_OVERFLOWS_INTEGERS_AT 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0
+#define NV_ZERO_IS_ALLBITS_ZERO
+#if UVSIZE == 8
+# ifdef BYTEORDER
+# if BYTEORDER == 0x1234
+# undef BYTEORDER
+# define BYTEORDER 0x12345678
+# else
+# if BYTEORDER == 0x4321
+# undef BYTEORDER
+# define BYTEORDER 0x87654321
+# endif
+# endif
+# endif
+#endif
+
+/* IVdf:
+ * This symbol defines the format string used for printing a Perl IV
+ * as a signed decimal integer.
+ */
+/* UVuf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned decimal integer.
+ */
+/* UVof:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned octal integer.
+ */
+/* UVxf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in lowercase abcdef.
+ */
+/* UVXf:
+ * This symbol defines the format string used for printing a Perl UV
+ * as an unsigned hexadecimal integer in uppercase ABCDEF.
+ */
+/* NVef:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %e-ish floating point format.
+ */
+/* NVff:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %f-ish floating point format.
+ */
+/* NVgf:
+ * This symbol defines the format string used for printing a Perl NV
+ * using %g-ish floating point format.
+ */
+#define IVdf "ld" /**/
+#define UVuf "lu" /**/
+#define UVof "lo" /**/
+#define UVxf "lx" /**/
+#define UVXf "lX" /**/
+#define NVef "e" /**/
+#define NVff "f" /**/
+#define NVgf "g" /**/
+
+/* SELECT_MIN_BITS:
+ * This symbol holds the minimum number of bits operated by select.
+ * That is, if you do select(n, ...), how many bits at least will be
+ * cleared in the masks if some activity is detected. Usually this
+ * is either n or 32*ceil(n/32), especially many little-endians do
+ * the latter. This is only useful if you have select(), naturally.
+ */
+#define SELECT_MIN_BITS 32 /**/
+
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
+ */
+#define STARTPERL "#!perl" /**/
+
+/* HAS_STDIO_STREAM_ARRAY:
+ * This symbol, if defined, tells that there is an array
+ * holding the stdio streams.
+ */
+/* STDIO_STREAM_ARRAY:
+ * This symbol tells the name of the array holding the stdio streams.
+ * Usual values include _iob, __iob, and __sF.
+ */
+/*#define HAS_STDIO_STREAM_ARRAY /**/
+#ifdef HAS_STDIO_STREAM_ARRAY
+#define STDIO_STREAM_ARRAY
+#endif
+
+/* GMTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+/* GMTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function gmtime () accepts, and defaults to 0
+ */
+/* LOCALTIME_MAX:
+ * This symbol contains the maximum value for the time_t offset that
+ * the system function localtime () accepts, and defaults to 0
+ */
+/* LOCALTIME_MIN:
+ * This symbol contains the minimum value for the time_t offset that
+ * the system function localtime () accepts, and defaults to 0
+ */
+#define GMTIME_MAX 2147483647 /**/
+#define GMTIME_MIN 0 /**/
+#define LOCALTIME_MAX 2147483647 /**/
+#define LOCALTIME_MIN 0 /**/
+
+/* USE_64_BIT_INT:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be employed (be they 32 or 64 bits). The minimal possible
+ * 64-bitness is used, just enough to get 64-bit integers into Perl.
+ * This may mean using for example "long longs", while your memory
+ * may still be limited to 2 gigabytes.
+ */
+/* USE_64_BIT_ALL:
+ * This symbol, if defined, indicates that 64-bit integers should
+ * be used when available. If not defined, the native integers
+ * will be used (be they 32 or 64 bits). The maximal possible
+ * 64-bitness is employed: LP64 or ILP64, meaning that you will
+ * be able to use more than 2 gigabytes of memory. This mode is
+ * even more binary incompatible than USE_64_BIT_INT. You may not
+ * be able to run the resulting executable in a 32-bit CPU at all or
+ * you may need at least to reboot your OS to 64-bit mode.
+ */
+#ifndef USE_64_BIT_INT
+/*#define USE_64_BIT_INT /**/
+#endif
+#ifndef USE_64_BIT_ALL
+/*#define USE_64_BIT_ALL /**/
+#endif
+
+/* USE_DTRACE:
+ * This symbol, if defined, indicates that Perl should
+ * be built with support for DTrace.
+ */
+/*#define USE_DTRACE /**/
+
+/* USE_FAST_STDIO:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use 'fast stdio'.
+ * Defaults to define in Perls 5.8 and earlier, to undef later.
+ */
+#ifndef USE_FAST_STDIO
+/*#define USE_FAST_STDIO /**/
+#endif
+
+/* USE_LARGE_FILES:
+ * This symbol, if defined, indicates that large file support
+ * should be used when available.
+ */
+#ifndef USE_LARGE_FILES
+/*#define USE_LARGE_FILES /**/
+#endif
+
+/* USE_LONG_DOUBLE:
+ * This symbol, if defined, indicates that long doubles should
+ * be used when available.
+ */
+#ifndef USE_LONG_DOUBLE
+/*#define USE_LONG_DOUBLE /**/
+#endif
+
+/* USE_MORE_BITS:
+ * This symbol, if defined, indicates that 64-bit interfaces and
+ * long doubles should be used when available.
+ */
+#ifndef USE_MORE_BITS
+/*#define USE_MORE_BITS /**/
+#endif
+
+/* MULTIPLICITY:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use multiplicity.
+ */
+#ifndef MULTIPLICITY
+/*#define MULTIPLICITY /**/
+#endif
+
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
+ */
+#ifndef USE_PERLIO
+/*#define USE_PERLIO /**/
+#endif
+
+/* USE_SOCKS:
+ * This symbol, if defined, indicates that Perl should
+ * be built to use socks.
+ */
+#ifndef USE_SOCKS
+/*#define USE_SOCKS /**/
+#endif
#endif
-#include <win32.h>