-#\r
-# Makefile to build perl on Windows NT using Microsoft NMAKE.\r
-# Supported compilers:\r
-# Visual C++ 5.x (possibly other versions)\r
-#\r
-# This is set up to build a perl.exe that runs off a shared library\r
-# (perl57.dll). Also makes individual DLLs for the XS extensions.\r
-#\r
-\r
-##\r
-## Make sure you read README.win32 *before* you mess with anything here!\r
-##\r
-\r
-##\r
-## Build configuration. Edit the values below to suit your needs.\r
-##\r
-\r
-#\r
-# Set these to wherever you want "nmake install" to put your\r
-# newly built perl.\r
-#\r
-INST_DRV = c:\r
-INST_TOP = $(INST_DRV)\perl\r
-\r
-#\r
-# Comment this out if you DON'T want your perl installation to be versioned.\r
-# This means that the new installation will overwrite any files from the\r
-# old installation at the same INST_TOP location. Leaving it enabled is\r
-# the safest route, as perl adds the extra version directory to all the\r
-# locations it installs files to. If you disable it, an alternative\r
-# versioned installation can be obtained by setting INST_TOP above to a\r
-# path that includes an arbitrary version string.\r
-#\r
-#INST_VER = \5.7.1\r
-\r
-#\r
-# Comment this out if you DON'T want your perl installation to have\r
-# architecture specific components. This means that architecture-\r
-# specific files will be installed along with the architecture-neutral\r
-# files. Leaving it enabled is safer and more flexible, in case you\r
-# want to build multiple flavors of perl and install them together in\r
-# the same location. Commenting it out gives you a simpler\r
-# installation that is easier to understand for beginners.\r
-#\r
-#INST_ARCH = \$(ARCHNAME)\r
-\r
-#\r
-# uncomment to enable multiple interpreters. This is need for fork()\r
-# emulation.\r
-#\r
-USE_MULTI = define\r
-\r
-#\r
-# Beginnings of interpreter cloning/threads; still very incomplete.\r
-# This should be enabled to get the fork() emulation. This needs\r
-# USE_MULTI as well.\r
-#\r
-USE_ITHREADS = define\r
-\r
-#\r
-# uncomment to enable the implicit "host" layer for all system calls\r
-# made by perl. This needs USE_MULTI above. This is also needed to\r
-# get fork().\r
-#\r
-USE_IMP_SYS = define\r
-\r
-#\r
-# uncomment to enable the experimental PerlIO I/O subsystem.\r
-USE_PERLIO = define\r
-\r
-#\r
-# WARNING! This option is deprecated and will eventually go away (enable\r
-# USE_ITHREADS instead).\r
-#\r
-# uncomment to enable threads-capabilities. This is incompatible with\r
-# USE_ITHREADS, and is only here for people who may have come to rely\r
-# on the experimental Thread support that was in 5.005.\r
-#\r
-#USE_5005THREADS = define\r
-\r
-#\r
-# WARNING! This option is deprecated and will eventually go away (enable\r
-# USE_MULTI instead).\r
-#\r
-# uncomment next line if you want to use the PERL_OBJECT build option.\r
-# DO NOT ENABLE unless you have legacy code that relies on the C++\r
-# CPerlObj class that was available in 5.005. This cannot be enabled\r
-# if you ask for USE_5005THREADS above.\r
-#\r
-#USE_OBJECT = define\r
-\r
-#\r
-# uncomment one of the following lines if you are using either\r
-# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)\r
-#\r
-#CCTYPE = MSVC20\r
-#CCTYPE = MSVC60\r
-\r
-#\r
-# uncomment next line if you want debug version of perl (big,slow)\r
-#\r
-#CFG = Debug\r
-\r
-#\r
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.\r
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.\r
-# This currently requires VC 5.0 with Service Pack 3 or later.\r
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/\r
-# and follow the directions in the package to install.\r
-#\r
-# Not recommended if you have VC 6.x and you're not running Windows 9x.\r
-#\r
-#USE_PERLCRT = define\r
-\r
-#\r
-# uncomment to enable linking with setargv.obj under the Visual C\r
-# compiler. Setting this options enables perl to expand wildcards in\r
-# arguments, but it may be harder to use alternate methods like\r
-# File::DosGlob that are more powerful. This option is supported only with\r
-# Visual C.\r
-#\r
-#USE_SETARGV = define\r
-\r
-#\r
-# if you have the source for des_fcrypt(), uncomment this and make sure the\r
-# file exists (see README.win32). File should be located in the same\r
-# directory as this file.\r
-#\r
-#CRYPT_SRC = fcrypt.c\r
-\r
-#\r
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a\r
-# library, uncomment this, and make sure the library exists (see README.win32)\r
-# Specify the full pathname of the library.\r
-#\r
-#CRYPT_LIB = fcrypt.lib\r
-\r
-#\r
-# set this if you wish to use perl's malloc\r
-# WARNING: Turning this on/off WILL break binary compatibility with extensions\r
-# you may have compiled with/without it. Be prepared to recompile all\r
-# extensions if you change the default. Currently, this cannot be enabled\r
-# if you ask for USE_IMP_SYS above.\r
-#\r
-#PERL_MALLOC = define\r
-\r
-#\r
-# set the install locations of the compiler include/libraries\r
-# Running VCVARS32.BAT is *required* when using Visual C.\r
-# Some versions of Visual C don't define MSVCDIR in the environment,\r
-# so you may have to set CCHOME explicitly (spaces in the path name should\r
-# not be quoted)\r
-#\r
-#CCHOME = f:\msvc20\r
-CCHOME = $(MSVCDIR)\r
-CCINCDIR = $(CCHOME)\include\r
-CCLIBDIR = $(CCHOME)\lib\r
-\r
-#\r
-# Additional compiler flags can be specified here.\r
-#\r
-\r
-#\r
-# This should normally be disabled. Adding -DPERL_POLLUTE enables support\r
-# for old symbols by default, at the expense of extreme pollution. You most\r
-# probably just want to build modules that won't compile with\r
-# perl Makefile.PL POLLUTE=1\r
-# instead of enabling this. Please report such modules to the respective\r
-# authors.\r
-#\r
-#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE\r
-\r
-#\r
-# This should normally be disabled. Enabling it will disable the File::Glob\r
-# implementation of CORE::glob.\r
-#\r
-#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB\r
-\r
-#\r
-# This should normally be disabled. Enabling it causes perl to read scripts\r
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.\r
-#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS\r
-\r
-#\r
-# specify semicolon-separated list of extra directories that modules will\r
-# look for libraries (spaces in path names need not be quoted)\r
-#\r
-EXTRALIBDIRS =\r
-\r
-#\r
-# set this to your email address (perl will guess a value from\r
-# from your loginname and your hostname, which may not be right)\r
-#\r
-#EMAIL =\r
-\r
-##\r
-## Build configuration ends.\r
-##\r
-\r
-##################### CHANGE THESE ONLY IF YOU MUST #####################\r
-\r
-!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""\r
-D_CRYPT = undef\r
-!ELSE\r
-D_CRYPT = define\r
-CRYPT_FLAG = -DHAVE_DES_FCRYPT\r
-!ENDIF\r
-\r
-!IF "$(USE_OBJECT)" == "define"\r
-PERL_MALLOC = undef\r
-USE_5005THREADS = undef\r
-USE_MULTI = undef\r
-USE_IMP_SYS = define\r
-!ENDIF\r
-\r
-!IF "$(PERL_MALLOC)" == ""\r
-PERL_MALLOC = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_5005THREADS)" == ""\r
-USE_5005THREADS = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_5005THREADS)" == "define"\r
-USE_ITHREADS = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_IMP_SYS)" == "define"\r
-PERL_MALLOC = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_MULTI)" == ""\r
-USE_MULTI = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_OBJECT)" == ""\r
-USE_OBJECT = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_ITHREADS)" == ""\r
-USE_ITHREADS = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_IMP_SYS)" == ""\r
-USE_IMP_SYS = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_PERLIO)" == ""\r
-USE_PERLIO = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_PERLCRT)" == ""\r
-USE_PERLCRT = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"\r
-USE_MULTI = define\r
-!ENDIF\r
-\r
-!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"\r
-USE_MULTI = define\r
-USE_5005THREADS = undef\r
-!ENDIF\r
-\r
-!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"\r
-BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT\r
-!ENDIF\r
-\r
-!IF "$(USE_IMP_SYS)" != "undef"\r
-BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS\r
-!ENDIF\r
-\r
-!IF "$(PROCESSOR_ARCHITECTURE)" == ""\r
-PROCESSOR_ARCHITECTURE = x86\r
-!ENDIF\r
-\r
-!IF "$(USE_OBJECT)" == "define"\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object\r
-!ELSE\r
-!IF "$(USE_5005THREADS)" == "define"\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread\r
-!ELSE\r
-!IF "$(USE_MULTI)" == "define"\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi\r
-!ELSE\r
-!IF "$(USE_PERLIO)" == "define"\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio\r
-!ELSE\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
-!ENDIF\r
-!ENDIF\r
-!ENDIF\r
-!ENDIF\r
-\r
-!IF "$(USE_PERLIO)" == "define"\r
-BUILDOPT = $(BUILDOPT) -DUSE_PERLIO\r
-!ENDIF\r
-\r
-!IF "$(USE_ITHREADS)" == "define"\r
-ARCHNAME = $(ARCHNAME)-thread\r
-!ENDIF\r
-\r
-# Visual Studio 98 specific\r
-!IF "$(CCTYPE)" == "MSVC60"\r
-\r
-# VC 6.0 can load the socket dll on demand. Makes the test suite\r
-# run in about 10% less time.\r
-DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib\r
-!ENDIF\r
-\r
-ARCHDIR = ..\lib\$(ARCHNAME)\r
-COREDIR = ..\lib\CORE\r
-AUTODIR = ..\lib\auto\r
-LIBDIR = ..\lib\r
-EXTDIR = ..\ext\r
-PODDIR = ..\pod\r
-EXTUTILSDIR = $(LIBDIR)\ExtUtils\r
-\r
-#\r
-INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin\r
-INST_BIN = $(INST_SCRIPT)$(INST_ARCH)\r
-INST_LIB = $(INST_TOP)$(INST_VER)\lib\r
-INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)\r
-INST_COREDIR = $(INST_ARCHLIB)\CORE\r
-INST_POD = $(INST_LIB)\pod\r
-INST_HTML = $(INST_TOP)$(INST_VER)\html\r
-\r
-#\r
-# Programs to compile, build .lib files and link\r
-#\r
-\r
-CC = cl\r
-LINK32 = link\r
-LIB32 = $(LINK32) -lib\r
-RSC = rc\r
-\r
-#\r
-# Options\r
-#\r
-\r
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..\r
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX\r
-DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)\r
-LOCDEFS = -DPERLDLL -DPERL_CORE\r
-SUBSYS = console\r
-CXX_FLAG = -TP -GX\r
-\r
-!IF "$(USE_PERLCRT)" != "define"\r
-LIBC = msvcrt.lib\r
-!ELSE\r
-LIBC = PerlCRT.lib\r
-!ENDIF\r
-\r
-PERLEXE_RES =\r
-PERLDLL_RES =\r
-\r
-!IF "$(CFG)" == "Debug"\r
-! IF "$(CCTYPE)" == "MSVC20"\r
-OPTIMIZE = -Od -MD -Z7 -DDEBUGGING\r
-! ELSE\r
-OPTIMIZE = -Od -MD -Zi -DDEBUGGING\r
-! ENDIF\r
-LINK_DBG = -debug -pdb:none\r
-!ELSE\r
-# -O1 yields smaller code, which turns out to be faster than -O2\r
-#OPTIMIZE = -O2 -MD -DNDEBUG\r
-OPTIMIZE = -O1 -MD -DNDEBUG\r
-LINK_DBG = -release\r
-!ENDIF\r
-\r
-!IF "$(USE_OBJECT)" == "define"\r
-OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG)\r
-BUILDOPT = $(BUILDOPT) -DPERL_OBJECT\r
-!ENDIF\r
-\r
-!IF "$(USE_PERLCRT)" != "define"\r
-BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX\r
-!ENDIF\r
-\r
-LIBBASEFILES = $(CRYPT_LIB) \\r
- oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \\r
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \\r
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \\r
- version.lib odbc32.lib odbccp32.lib\r
-\r
-# we add LIBC here, since we may be using PerlCRT.dll\r
-LIBFILES = $(LIBBASEFILES) $(LIBC)\r
-\r
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
- $(PCHFLAGS) $(OPTIMIZE)\r
-LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \\r
- -libpath:"$(INST_COREDIR)" \\r
- -machine:$(PROCESSOR_ARCHITECTURE)\r
-OBJOUT_FLAG = -Fo\r
-EXEOUT_FLAG = -Fe\r
-\r
-CFLAGS_O = $(CFLAGS) $(BUILDOPT)\r
-\r
-#################### do not edit below this line #######################\r
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############\r
-\r
-o = .obj\r
-\r
-#\r
-# Rules\r
-#\r
-\r
-.SUFFIXES : .c $(o) .dll .lib .exe .rc .res\r
-\r
-.c$(o):\r
- $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<\r
-\r
-.y.c:\r
- $(NOOP)\r
-\r
-$(o).dll:\r
- $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \\r
- -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)\r
-\r
-.rc.res:\r
- $(RSC) -i.. $<\r
-\r
-#\r
-# various targets\r
-\r
-# makedef.pl must be updated if this changes, and this should normally\r
-# only change when there is an incompatible revision of the public API.\r
-# XXX so why did we change it from perl56 to perl57?\r
-PERLIMPLIB = ..\perl57.lib\r
-PERLDLL = ..\perl57.dll\r
-\r
-MINIPERL = ..\miniperl.exe\r
-MINIDIR = .\mini\r
-PERLEXE = ..\perl.exe\r
-WPERLEXE = ..\wperl.exe\r
-GLOBEXE = ..\perlglob.exe\r
-CONFIGPM = ..\lib\Config.pm\r
-MINIMOD = ..\lib\ExtUtils\Miniperl.pm\r
-X2P = ..\x2p\a2p.exe\r
-\r
-# Nominate a target which causes extensions to be re-built\r
-# This used to be $(PERLEXE), but at worst it is the .dll that they depend\r
-# on and really only the interface - i.e. the .def file used to export symbols\r
-# from the .dll\r
-PERLDEP = perldll.def\r
-\r
-PL2BAT = bin\pl2bat.pl\r
-GLOBBAT = bin\perlglob.bat\r
-\r
-UTILS = \\r
- ..\utils\h2ph \\r
- ..\utils\splain \\r
- ..\utils\dprofpp \\r
- ..\utils\perlbug \\r
- ..\utils\pl2pm \\r
- ..\utils\c2ph \\r
- ..\utils\h2xs \\r
- ..\utils\perldoc \\r
- ..\utils\perlcc \\r
- ..\pod\checkpods \\r
- ..\pod\pod2html \\r
- ..\pod\pod2latex \\r
- ..\pod\pod2man \\r
- ..\pod\pod2text \\r
- ..\pod\pod2usage \\r
- ..\pod\podchecker \\r
- ..\pod\podselect \\r
- ..\x2p\find2perl \\r
- ..\x2p\s2p \\r
- bin\exetype.pl \\r
- bin\runperl.pl \\r
- bin\pl2bat.pl \\r
- bin\perlglob.pl \\r
- bin\search.pl\r
-\r
-MAKE = nmake -nologo\r
-MAKE_BARE = nmake\r
-\r
-CFGSH_TMPL = config.vc\r
-CFGH_TMPL = config_H.vc\r
-\r
-XCOPY = xcopy /f /r /i /d\r
-RCOPY = xcopy /f /r /i /e /d\r
-NOOP = @echo\r
-NULL =\r
-\r
-DEL = del\r
-\r
-#\r
-# filenames given to xsubpp must have forward slashes (since it puts\r
-# full pathnames in #line strings)\r
-XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \\r
- -C++ -prototypes\r
-\r
-MICROCORE_SRC = \\r
- ..\av.c \\r
- ..\deb.c \\r
- ..\doio.c \\r
- ..\doop.c \\r
- ..\dump.c \\r
- ..\globals.c \\r
- ..\gv.c \\r
- ..\hv.c \\r
- ..\locale.c \\r
- ..\mg.c \\r
- ..\numeric.c \\r
- ..\op.c \\r
- ..\perl.c \\r
- ..\perlapi.c \\r
- ..\perly.c \\r
- ..\pp.c \\r
- ..\pp_ctl.c \\r
- ..\pp_hot.c \\r
- ..\pp_pack.c \\r
- ..\pp_sys.c \\r
- ..\regcomp.c \\r
- ..\regexec.c \\r
- ..\run.c \\r
- ..\scope.c \\r
- ..\sv.c \\r
- ..\taint.c \\r
- ..\toke.c \\r
- ..\universal.c \\r
- ..\utf8.c \\r
- ..\util.c \\r
- ..\xsutils.c\r
-\r
-EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c\r
-\r
-!IF "$(PERL_MALLOC)" == "define"\r
-EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c\r
-!ENDIF\r
-\r
-!IF "$(USE_OBJECT)" != "define"\r
-EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c\r
-!ENDIF\r
-\r
-WIN32_SRC = \\r
- .\win32.c \\r
- .\win32io.c \\r
- .\win32sck.c \\r
- .\win32thread.c\r
-\r
-!IF "$(CRYPT_SRC)" != ""\r
-WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)\r
-!ENDIF\r
-\r
-DLL_SRC = $(DYNALOADER).c\r
-\r
-X2P_SRC = \\r
- ..\x2p\a2p.c \\r
- ..\x2p\hash.c \\r
- ..\x2p\str.c \\r
- ..\x2p\util.c \\r
- ..\x2p\walk.c\r
-\r
-CORE_NOCFG_H = \\r
- ..\av.h \\r
- ..\cop.h \\r
- ..\cv.h \\r
- ..\dosish.h \\r
- ..\embed.h \\r
- ..\form.h \\r
- ..\gv.h \\r
- ..\handy.h \\r
- ..\hv.h \\r
- ..\iperlsys.h \\r
- ..\mg.h \\r
- ..\nostdio.h \\r
- ..\op.h \\r
- ..\opcode.h \\r
- ..\perl.h \\r
- ..\perlapi.h \\r
- ..\perlsdio.h \\r
- ..\perlsfio.h \\r
- ..\perly.h \\r
- ..\pp.h \\r
- ..\proto.h \\r
- ..\regexp.h \\r
- ..\scope.h \\r
- ..\sv.h \\r
- ..\thread.h \\r
- ..\unixish.h \\r
- ..\utf8.h \\r
- ..\util.h \\r
- ..\warnings.h \\r
- ..\XSUB.h \\r
- ..\EXTERN.h \\r
- ..\perlvars.h \\r
- ..\intrpvar.h \\r
- ..\thrdvar.h \\r
- .\include\dirent.h \\r
- .\include\netdb.h \\r
- .\include\sys\socket.h \\r
- .\win32.h\r
-\r
-CORE_H = $(CORE_NOCFG_H) .\config.h\r
-\r
-MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)\r
-CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)\r
-WIN32_OBJ = $(WIN32_SRC:.c=.obj)\r
-MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \\r
- $(MINIDIR)\miniperlmain$(o) \\r
- $(MINIDIR)\perlio$(o)\r
-MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)\r
-MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)\r
-DLL_OBJ = $(DLL_SRC:.c=.obj)\r
-X2P_OBJ = $(X2P_SRC:.c=.obj)\r
-\r
-PERLDLL_OBJ = $(CORE_OBJ)\r
-PERLEXE_OBJ = perlmain$(o)\r
-\r
-PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)\r
-#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)\r
-\r
-!IF "$(USE_SETARGV)" != ""\r
-SETARGV_OBJ = setargv$(o)\r
-!ENDIF\r
-\r
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader\r
-SOCKET = $(EXTDIR)\Socket\Socket\r
-FCNTL = $(EXTDIR)\Fcntl\Fcntl\r
-OPCODE = $(EXTDIR)\Opcode\Opcode\r
-SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File\r
-IO = $(EXTDIR)\IO\IO\r
-POSIX = $(EXTDIR)\POSIX\POSIX\r
-ATTRS = $(EXTDIR)\attrs\attrs\r
-THREAD = $(EXTDIR)\Thread\Thread\r
-B = $(EXTDIR)\B\B\r
-RE = $(EXTDIR)\re\re\r
-DUMPER = $(EXTDIR)\Data\Dumper\Dumper\r
-ERRNO = $(EXTDIR)\Errno\Errno\r
-PEEK = $(EXTDIR)\Devel\Peek\Peek\r
-BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader\r
-DPROF = $(EXTDIR)\Devel\DProf\DProf\r
-GLOB = $(EXTDIR)\File\Glob\Glob\r
-HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname\r
-STORABLE = $(EXTDIR)\Storable\Storable\r
-FILTER = $(EXTDIR)\Filter\Util\Call\Call\r
-ENCODE = $(EXTDIR)\Encode\Encode\r
-MD5 = $(EXTDIR)\Digest\MD5\MD5\r
-PERLIOSCALAR = $(EXTDIR)\PerlIO\Scalar\Scalar\r
-MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64\r
-TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes\r
-TIMEPIECE = $(EXTDIR)\Time\Piece\Piece\r
-CWD = $(EXTDIR)\Cwd\Cwd\r
-LISTUTIL = $(EXTDIR)\List\Util\Util\r
-PERLIOVIA = $(EXTDIR)\PerlIO\Via\Via\r
-XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap\r
-\r
-SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll\r
-FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll\r
-OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll\r
-SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll\r
-IO_DLL = $(AUTODIR)\IO\IO.dll\r
-POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll\r
-ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll\r
-THREAD_DLL = $(AUTODIR)\Thread\Thread.dll\r
-B_DLL = $(AUTODIR)\B\B.dll\r
-DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll\r
-PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll\r
-RE_DLL = $(AUTODIR)\re\re.dll\r
-BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll\r
-DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll\r
-GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll\r
-HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll\r
-STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll\r
-FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll\r
-ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll\r
-MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll\r
-PERLIOSCALAR_DLL= $(AUTODIR)\PerlIO\Scalar\Scalar.dll\r
-MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll\r
-TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll\r
-TIMEPIECE_DLL = $(AUTODIR)\Time\Piece\Piece.dll\r
-CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll\r
-LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll\r
-PERLIOVIA_DLL = $(AUTODIR)\PerlIO\Via\Via.dll\r
-XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll\r
-\r
-EXTENSION_C = \\r
- $(SOCKET).c \\r
- $(FCNTL).c \\r
- $(OPCODE).c \\r
- $(SDBM_FILE).c \\r
- $(IO).c \\r
- $(POSIX).c \\r
- $(ATTRS).c \\r
- $(THREAD).c \\r
- $(RE).c \\r
- $(DUMPER).c \\r
- $(PEEK).c \\r
- $(B).c \\r
- $(BYTELOADER).c \\r
- $(DPROF).c \\r
- $(GLOB).c \\r
- $(HOSTNAME).c \\r
- $(STORABLE).c \\r
- $(FILTER).c \\r
- $(ENCODE).c \\r
- $(MD5).c \\r
- $(PERLIOSCALAR).c \\r
- $(MIMEBASE64).c \\r
- $(TIMEHIRES).c \\r
- $(TIMEPIECE).c \\r
- $(CWD).c \\r
- $(LISTUTIL).c \\r
- $(PERLIOVIA).c \\r
- $(XSTYPEMAP).c\r
-\r
-EXTENSION_DLL = \\r
- $(SOCKET_DLL) \\r
- $(FCNTL_DLL) \\r
- $(OPCODE_DLL) \\r
- $(SDBM_FILE_DLL)\\r
- $(IO_DLL) \\r
- $(POSIX_DLL) \\r
- $(ATTRS_DLL) \\r
- $(DUMPER_DLL) \\r
- $(PEEK_DLL) \\r
- $(B_DLL) \\r
- $(RE_DLL) \\r
- $(THREAD_DLL) \\r
- $(BYTELOADER_DLL) \\r
- $(DPROF_DLL) \\r
- $(GLOB_DLL) \\r
- $(HOSTNAME_DLL) \\r
- $(STORABLE_DLL) \\r
- $(FILTER_DLL) \\r
- $(ENCODE_DLL) \\r
- $(MD5_DLL) \\r
- $(PERLIOSCALAR_DLL) \\r
- $(MIMEBASE64_DLL) \\r
- $(TIMEHIRES_DLL) \\r
- $(TIMEPIECE_DLL) \\r
- $(CWD_DLL) \\r
- $(LISTUTIL_DLL) \\r
- $(PERLIOVIA_DLL) \\r
- $(XSTYPEMAP_DLL)\r
-\r
-POD2HTML = $(PODDIR)\pod2html\r
-POD2MAN = $(PODDIR)\pod2man\r
-POD2LATEX = $(PODDIR)\pod2latex\r
-POD2TEXT = $(PODDIR)\pod2text\r
-\r
-CFG_VARS = \\r
- "INST_DRV=$(INST_DRV)" \\r
- "INST_TOP=$(INST_TOP)" \\r
- "INST_VER=$(INST_VER)" \\r
- "INST_ARCH=$(INST_ARCH)" \\r
- "archname=$(ARCHNAME)" \\r
- "cc=$(CC)" \\r
- "ld=$(LINK32)" \\r
- "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \\r
- "cf_email=$(EMAIL)" \\r
- "d_crypt=$(D_CRYPT)" \\r
- "d_mymalloc=$(PERL_MALLOC)" \\r
- "libs=$(LIBFILES)" \\r
- "incpath=$(CCINCDIR:"=\")" \\r
- "libperl=$(PERLIMPLIB:..\=)" \\r
- "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \\r
- "libc=$(LIBC)" \\r
- "make=$(MAKE_BARE)" \\r
- "use5005threads=$(USE_5005THREADS)" \\r
- "useithreads=$(USE_ITHREADS)" \\r
- "usethreads=$(USE_5005THREADS)" \\r
- "usemultiplicity=$(USE_MULTI)" \\r
- "useperlio=$(USE_PERLIO)" \\r
- "LINK_FLAGS=$(LINK_FLAGS:"=\")" \\r
- "optimize=$(OPTIMIZE:"=\")"\r
-\r
-#\r
-# Top targets\r
-#\r
-\r
-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \\r
- $(X2P) Extensions\r
- @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.\r
-\r
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c\r
-\r
-#------------------------------------------------------------\r
-\r
-$(GLOBEXE) : perlglob$(o)\r
- $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \\r
- perlglob$(o) setargv$(o)\r
-\r
-perlglob$(o) : perlglob.c\r
-\r
-config.w32 : $(CFGSH_TMPL)\r
- copy $(CFGSH_TMPL) config.w32\r
-\r
-.\config.h : $(CFGH_TMPL)\r
- -del /f config.h\r
- copy $(CFGH_TMPL) config.h\r
-\r
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL\r
- $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh\r
-\r
-# this target is for when changes to the main config.sh happen\r
-# edit config.{b,v,g}c and make this target once for each supported\r
-# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)\r
-regen_config_h:\r
- perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh\r
- cd ..\r
- -del /f perl.exe\r
- perl configpm\r
- cd win32\r
- -del /f $(CFGH_TMPL)\r
- -mkdir $(COREDIR)\r
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
- rename config.h $(CFGH_TMPL)\r
-\r
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl\r
- cd ..\r
- miniperl configpm\r
- cd win32\r
- if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)\r
- $(XCOPY) ..\*.h $(COREDIR)\*.*\r
- $(XCOPY) *.h $(COREDIR)\*.*\r
- $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*\r
- $(RCOPY) include $(COREDIR)\*.*\r
- -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
- if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)\r
-\r
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)\r
- $(LINK32) -subsystem:console -out:$@ @<<\r
- $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)\r
-<<\r
-\r
-$(MINIDIR) :\r
- if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"\r
-\r
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)\r
- $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c\r
-\r
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)\r
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c\r
-\r
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c\r
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h\r
-!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"\r
-perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h\r
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c\r
-!ENDIF\r
-\r
-# 1. we don't want to rebuild miniperl.exe when config.h changes\r
-# 2. we don't want to rebuild miniperl.exe with non-default config.h\r
-$(MINI_OBJ) : $(CORE_NOCFG_H)\r
-\r
-$(WIN32_OBJ) : $(CORE_H)\r
-$(CORE_OBJ) : $(CORE_H)\r
-$(DLL_OBJ) : $(CORE_H)\r
-$(X2P_OBJ) : $(CORE_H)\r
-\r
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl\r
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \\r
- CCTYPE=$(CCTYPE) > perldll.def\r
-\r
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)\r
- $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<\r
- $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)\r
-<<\r
- $(XCOPY) $(PERLIMPLIB) $(COREDIR)\r
-\r
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl\r
- cd ..\r
- miniperl minimod.pl > lib\ExtUtils\Miniperl.pm\r
- cd win32\r
-\r
-..\x2p\a2p$(o) : ..\x2p\a2p.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c\r
-\r
-..\x2p\hash$(o) : ..\x2p\hash.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c\r
-\r
-..\x2p\str$(o) : ..\x2p\str.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c\r
-\r
-..\x2p\util$(o) : ..\x2p\util.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c\r
-\r
-..\x2p\walk$(o) : ..\x2p\walk.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c\r
-\r
-$(X2P) : $(MINIPERL) $(X2P_OBJ)\r
- $(MINIPERL) ..\x2p\find2perl.PL\r
- $(MINIPERL) ..\x2p\s2p.PL\r
- $(LINK32) -subsystem:console -out:$@ @<<\r
- $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)\r
-<<\r
-\r
-perlmain.c : runperl.c\r
- copy runperl.c perlmain.c\r
-\r
-perlmain$(o) : perlmain.c\r
- $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c\r
-\r
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)\r
- $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \\r
- $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)\r
- copy $(PERLEXE) $(WPERLEXE)\r
- $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS\r
- copy splittree.pl ..\r
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
-\r
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)\r
- if not exist $(AUTODIR) mkdir $(AUTODIR)\r
- cd $(EXTDIR)\$(*B)\r
- ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL\r
- ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL\r
- cd ..\..\win32\r
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)\r
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)\r
- cd $(EXTDIR)\$(*B)\r
- $(XSUBPP) dl_win32.xs > $(*B).c\r
- cd ..\..\win32\r
-\r
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs\r
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs\r
-\r
-#----------------------------------------------------------------------------------\r
-Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)\r
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)\r
-\r
-Extensions_clean: \r
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean\r
-\r
-#----------------------------------------------------------------------------------\r
-\r
-doc: $(PERLEXE)\r
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \\r
- --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \\r
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse\r
-\r
-utils: $(PERLEXE) $(X2P)\r
- cd ..\utils\r
- $(MAKE) PERL=$(MINIPERL)\r
- cd ..\pod\r
- copy ..\README.aix .\perlaix.pod\r
- copy ..\README.amiga .\perlamiga.pod\r
- copy ..\README.apollo .\perlapollo.pod\r
- copy ..\README.beos .\perlbeos.pod\r
- copy ..\README.bs2000 .\perlbs2000.pod\r
- copy ..\README.cygwin .\perlcygwin.pod\r
- copy ..\README.dgux .\perldgux.pod\r
- copy ..\README.dos .\perldos.pod\r
- copy ..\README.epoc .\perlepoc.pod\r
- copy ..\README.hurd .\perlhurd.pod\r
- copy ..\README.hpux .\perlhpux.pod\r
- copy ..\README.machten .\perlmachten.pod\r
- copy ..\README.macos .\perlmacos.pod\r
- copy ..\README.mint .\perlmint.pod\r
- copy ..\README.mpeix .\perlmpeix.pod\r
- copy ..\README.netware .\perlnetware.pod\r
- copy ..\README.os2 .\perlos2.pod\r
- copy ..\README.os390 .\perlos390.pod\r
- copy ..\README.plan9 .\perlplan9.pod\r
- copy ..\README.qnx .\perlqnx.pod\r
- copy ..\README.solaris .\perlsolaris.pod\r
- copy ..\README.tru64 .\perltru64.pod\r
- copy ..\README.uts .\perluts.pod\r
- copy ..\README.vmesa .\perlvmesa.pod\r
- copy ..\vms\perlvms.pod .\perlvms.pod\r
- copy ..\README.vos .\perlvos.pod\r
- copy ..\README.win32 .\perlwin32.pod\r
- $(MAKE) -f ..\win32\pod.mak converters\r
- cd ..\lib\r
- $(PERLEXE) lib_pm.PL\r
- cd ..\win32\r
- $(PERLEXE) $(PL2BAT) $(UTILS)\r
-\r
-distclean: clean\r
- -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \\r
- $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)\r
- -del /f *.def *.map\r
- -del /f $(EXTENSION_DLL)\r
- -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm\r
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs\r
- -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm\r
- -del /f $(LIBDIR)\XSLoader.pm\r
- -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm\r
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm\r
- -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm\r
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm\r
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm\r
- -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm\r
- -del /f $(LIBDIR)\File\Glob.pm\r
- -del /f $(LIBDIR)\Storable.pm\r
- -del /f $(LIBDIR)\Filter\Util\Call.pm\r
- -del /f $(LIBDIR)\Digest\MD5.pm\r
- -del /f $(LIBDIR)\PerlIO\Scalar.pm\r
- -del /f $(LIBDIR)\PerlIO\Via.pm\r
- -del /f $(LIBDIR)\MIME\Base64.pm\r
- -del /f $(LIBDIR)\MIME\QuotedPrint.pm\r
- -del /f $(LIBDIR)\List\Util.pm\r
- -del /f $(LIBDIR)\Scalar\Util.pm\r
- -del /f $(LIBDIR)\Time\HiRes.pm\r
- -del /f $(LIBDIR)\Time\Piece.pm\r
- -del /f $(LIBDIR)\XS\Typemap.pm\r
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO\r
- -rmdir /s $(LIBDIR)\IO\r
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread\r
- -rmdir /s $(LIBDIR)\Thread\r
- -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B\r
- -rmdir /s $(LIBDIR)\B\r
- -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data\r
- -rmdir /s $(LIBDIR)\Data\r
- -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util\r
- -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest\r
- -rmdir /s $(LIBDIR)\Digest\r
- -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME\r
- -rmdir /s $(LIBDIR)\MIME\r
- -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List\r
- -rmdir /s $(LIBDIR)\List\r
- -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar\r
- -rmdir /s $(LIBDIR)\Scalar\r
- -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS\r
- -rmdir /s $(LIBDIR)\XS\r
- cd $(PODDIR)\r
- -del /f *.html *.bat checkpods \\r
- perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \\r
- perlbs2000.pod perlcygwin.pod perldgux.pod \\r
- perldos.pod perlepoc.pod perlhurd.pod \\r
- perlhpux.pod perlmachten.pod \\r
- perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \\r
- perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \\r
- perlsolaris.pod perltru64.pod perluts.pod \\r
- perlvmesa.pod perlvms.pod perlvos.pod \\r
- perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \\r
- podchecker podselect\r
- cd ..\utils\r
- -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp\r
- -del /f *.bat\r
- cd ..\win32\r
- cd ..\x2p\r
- -del /f find2perl s2p\r
- -del /f *.bat\r
- cd ..\win32\r
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new\r
- -del /f $(CONFIGPM)\r
- -del /f bin\*.bat\r
- cd $(EXTDIR)\r
- -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib\r
- cd ..\win32\r
- -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)\r
- -rmdir /s $(AUTODIR)\r
- -if exist $(COREDIR) rmdir /s /q $(COREDIR)\r
- -rmdir /s $(COREDIR)\r
-\r
-install : all installbare installhtml\r
-\r
-installbare : utils\r
- $(PERLEXE) ..\installperl\r
- if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*\r
- $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*\r
- $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*\r
-\r
-installhtml : doc\r
- $(RCOPY) html\*.* $(INST_HTML)\*.*\r
-\r
-inst_lib : $(CONFIGPM)\r
- copy splittree.pl ..\r
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
- $(RCOPY) ..\lib $(INST_LIB)\*.*\r
-\r
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils\r
- $(XCOPY) $(MINIPERL) ..\t\perl.exe\r
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
- attrib -r ..\t\*.*\r
- copy test ..\t\r
- cd ..\t\r
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t\r
- cd ..\win32\r
-\r
-test-prep : all utils\r
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)\r
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)\r
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
-\r
-test : test-prep\r
- cd ..\t\r
- $(PERLEXE) -I..\lib harness\r
- cd ..\win32\r
-\r
-test-notty : test-prep\r
- set PERL_SKIP_TTY_TEST=1\r
- cd ..\t\r
- $(PERLEXE) -I..\lib harness\r
- cd ..\win32\r
-\r
-test-wide : test-prep\r
- set HARNESS_PERL_SWITCHES=-C\r
- cd ..\t\r
- $(PERLEXE) -I..\lib harness\r
- cd ..\win32\r
-\r
-test-wide-notty : test-prep\r
- set PERL_SKIP_TTY_TEST=1\r
- set HARNESS_PERL_SWITCHES=-C\r
- cd ..\t\r
- $(PERLEXE) -I..\lib harness\r
- cd ..\win32\r
-\r
-clean : Extensions_clean\r
- -@$(DEL) miniperlmain$(o)\r
- -@$(DEL) $(MINIPERL)\r
- -@$(DEL) perlglob$(o)\r
- -@$(DEL) perlmain$(o)\r
- -@$(DEL) config.w32\r
- -@$(DEL) config.h\r
- -@$(DEL) $(GLOBEXE)\r
- -@$(DEL) $(PERLEXE)\r
- -@$(DEL) $(WPERLEXE)\r
- -@$(DEL) $(PERLDLL)\r
- -@$(DEL) $(CORE_OBJ)\r
- -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)\r
- -rmdir /s $(MINIDIR)\r
- -@$(DEL) $(WIN32_OBJ)\r
- -@$(DEL) $(DLL_OBJ)\r
- -@$(DEL) $(X2P_OBJ)\r
- -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res\r
- -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat\r
- -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat\r
- -@$(DEL) *.ilk\r
- -@$(DEL) *.pdb\r
-\r
-# Handy way to run perlbug -ok without having to install and run the\r
-# installed perlbug. We don't re-run the tests here - we trust the user.\r
-# Please *don't* use this unless all tests pass.\r
-# If you want to report test failures, use "nmake nok" instead.\r
-ok: utils\r
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"\r
-\r
-okfile: utils\r
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok\r
-\r
-nok: utils\r
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"\r
-\r
-nokfile: utils\r
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok\r
+#
+# Makefile to build perl on Windows NT using Microsoft NMAKE.
+# Supported compilers:
+# Visual C++ 2.0 through 6.0 (and possibly newer versions)
+# MS Platform SDK 64-bit compiler and tools **experimental**
+#
+# This is set up to build a perl.exe that runs off a shared library
+# (perl59.dll). Also makes individual DLLs for the XS extensions.
+#
+
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+
+##
+## Build configuration. Edit the values below to suit your needs.
+##
+
+#
+# Set these to wherever you want "nmake install" to put your
+# newly built perl.
+#
+INST_DRV = c:
+INST_TOP = $(INST_DRV)\perl
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location. Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to. If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+#INST_VER = \5.9.1
+
+#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components. This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files. Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location. Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+#INST_ARCH = \$(ARCHNAME)
+
+#
+# uncomment to enable multiple interpreters. This is need for fork()
+# emulation and for thread support.
+#
+USE_MULTI = define
+
+#
+# Beginnings of interpreter cloning/threads; now reasonably complete.
+# This should be enabled to get the fork() emulation. This needs
+# USE_MULTI as well.
+#
+USE_ITHREADS = define
+
+#
+# uncomment to enable the implicit "host" layer for all system calls
+# made by perl. This needs USE_MULTI above. This is also needed to
+# get fork().
+#
+USE_IMP_SYS = define
+
+#
+# Comment out next assign to disable perl's I/O subsystem and use compiler's
+# stdio for IO - depending on your compiler vendor and run time library you may
+# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
+# You will also be unable to take full advantage of perl5.8's support for multiple
+# encodings and may see lower IO performance. You have been warned.
+USE_PERLIO = define
+
+#
+# Comment this out if you don't want to enable large file support for
+# some reason. Should normally only be changed to maintain compatibility
+# with an older release of perl.
+USE_LARGE_FILES = define
+
+#
+# uncomment one of the following lines if you are using either
+# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
+#
+#CCTYPE = MSVC20
+CCTYPE = MSVC60
+
+#
+# uncomment next line if you want debug version of perl (big,slow)
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
+#
+#CFG = Debug
+
+#
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.
+# This currently requires VC 5.0 with Service Pack 3 or later.
+# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
+# and follow the directions in the package to install.
+#
+# Not recommended if you have VC 6.x and you're not running Windows 9x.
+#
+#USE_PERLCRT = define
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful. This option is supported only with
+# Visual C.
+#
+#USE_SETARGV = define
+
+#
+# if you want to have the crypt() builtin function implemented, leave this or
+# CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
+# version of des_fcrypt().
+#
+CRYPT_SRC = fcrypt.c
+
+#
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
+# library, uncomment this, and make sure the library exists (see README.win32)
+# Specify the full pathname of the library.
+#
+#CRYPT_LIB = fcrypt.lib
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it. Be prepared to recompile all
+# extensions if you change the default. Currently, this cannot be enabled
+# if you ask for USE_IMP_SYS above.
+#
+#PERL_MALLOC = define
+
+#
+# set this to enable debugging mstats
+# This must be enabled to use the Devel::Peek::mstat() function. This cannot
+# be enabled without PERL_MALLOC as well.
+#
+#DEBUG_MSTATS = define
+
+#
+#
+# set the install locations of the compiler include/libraries
+# Running VCVARS32.BAT is *required* when using Visual C.
+# Some versions of Visual C don't define MSVCDIR in the environment,
+# so you may have to set CCHOME explicitly (spaces in the path name should
+# not be quoted)
+#
+#CCHOME = f:\msvc20
+CCHOME = $(MSVCDIR)
+CCINCDIR = $(CCHOME)\include
+CCLIBDIR = $(CCHOME)\lib
+
+#
+# Additional compiler flags can be specified here.
+#
+
+#
+# This should normally be disabled. Adding -DPERL_POLLUTE enables support
+# for old symbols by default, at the expense of extreme pollution. You most
+# probably just want to build modules that won't compile with
+# perl Makefile.PL POLLUTE=1
+# instead of enabling this. Please report such modules to the respective
+# authors.
+#
+#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
+
+#
+# This should normally be disabled. Enabling it will disable the File::Glob
+# implementation of CORE::glob.
+#
+#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
+
+#
+# This should normally be disabled. Enabling it causes perl to read scripts
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS =
+
+#
+# set this to your email address (perl will guess a value from
+# from your loginname and your hostname, which may not be right)
+#
+#EMAIL =
+
+##
+## Build configuration ends.
+##
+
+##################### CHANGE THESE ONLY IF YOU MUST #####################
+
+!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
+D_CRYPT = undef
+!ELSE
+D_CRYPT = define
+CRYPT_FLAG = -DHAVE_DES_FCRYPT
+!ENDIF
+
+!IF "$(PERL_MALLOC)" == ""
+PERL_MALLOC = undef
+DEBUG_MSTATS = undef
+!ENDIF
+
+!IF "$(DEBUG_MSTATS)" == ""
+DEBUG_MSTATS = undef
+!ENDIF
+
+!IF "$(DEBUG_MSTATS)" == "define"
+BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC = undef
+!ENDIF
+
+!IF "$(USE_MULTI)" == ""
+USE_MULTI = undef
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == ""
+USE_ITHREADS = undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" == ""
+USE_IMP_SYS = undef
+!ENDIF
+
+!IF "$(USE_PERLIO)" == ""
+USE_PERLIO = undef
+!ENDIF
+
+!IF "$(USE_LARGE_FILES)" == ""
+USE_LARGE_FILES = undef
+!ENDIF
+
+!IF "$(USE_PERLCRT)" == ""
+USE_PERLCRT = undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
+USE_MULTI = define
+!ENDIF
+
+!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
+USE_MULTI = define
+!ENDIF
+
+!IF "$(USE_MULTI)" != "undef"
+BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" != "undef"
+BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
+!ENDIF
+
+!IF "$(PROCESSOR_ARCHITECTURE)" == ""
+PROCESSOR_ARCHITECTURE = x86
+!ENDIF
+
+!IF "$(WIN64)" == ""
+!IF "$(PROCESSOR_ARCHITEW6432)" != ""
+PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
+WIN64 = define
+!ELSE
+!IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
+WIN64 = define
+!ELSE
+WIN64 = undef
+!ENDIF
+!ENDIF
+!ENDIF
+
+!IF "$(USE_MULTI)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
+!ELSE
+!IF "$(USE_PERLIO)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
+!ELSE
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
+!ENDIF
+!ENDIF
+
+!IF "$(USE_PERLIO)" == "define"
+BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == "define"
+ARCHNAME = $(ARCHNAME)-thread
+!ENDIF
+
+# Visual Studio 98 specific
+!IF "$(CCTYPE)" == "MSVC60"
+
+# VC 6.0 can load the socket dll on demand. Makes the test suite
+# run in about 10% less time.
+DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
+!ENDIF
+
+ARCHDIR = ..\lib\$(ARCHNAME)
+COREDIR = ..\lib\CORE
+AUTODIR = ..\lib\auto
+LIBDIR = ..\lib
+EXTDIR = ..\ext
+PODDIR = ..\pod
+EXTUTILSDIR = $(LIBDIR)\ExtUtils
+
+#
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
+INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB = $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
+INST_COREDIR = $(INST_ARCHLIB)\CORE
+INST_POD = $(INST_LIB)\pod
+INST_HTML = $(INST_TOP)$(INST_VER)\html
+
+#
+# Programs to compile, build .lib files and link
+#
+
+CC = cl
+LINK32 = link
+LIB32 = $(LINK32) -lib
+RSC = rc
+
+#
+# Options
+#
+
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
+SUBSYS = console
+CXX_FLAG = -TP -GX
+
+!IF "$(USE_PERLCRT)" != "define"
+LIBC = msvcrt.lib
+!ELSE
+LIBC = PerlCRT.lib
+!ENDIF
+
+!IF "$(CFG)" == "Debug"
+! IF "$(CCTYPE)" == "MSVC20"
+OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
+! ELSE
+OPTIMIZE = -Od -MD -Zi -DDEBUGGING
+! ENDIF
+LINK_DBG = -debug
+!ELSE
+OPTIMIZE = -MD -DNDEBUG
+LINK_DBG = -release
+! IF "$(WIN64)" == "define"
+# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
+OPTIMIZE = $(OPTIMIZE) -Ox -GL
+LINK_DBG = $(LINK_DBG) -ltcg
+! ELSE
+# -O1 yields smaller code, which turns out to be faster than -O2 on x86
+OPTIMIZE = $(OPTIMIZE) -O1
+#OPTIMIZE = $(OPTIMIZE) -O2
+! ENDIF
+!ENDIF
+
+!IF "$(WIN64)" == "define"
+DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
+OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
+!ENDIF
+
+!IF "$(USE_PERLCRT)" != "define"
+BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
+!ENDIF
+
+LIBBASEFILES = $(CRYPT_LIB) \
+ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+ version.lib
+
+# win64 doesn't have some libs
+!IF "$(WIN64)" != "define"
+LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
+!ENDIF
+
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES = $(LIBBASEFILES) $(LIBC)
+
+CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+ $(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
+ -libpath:"$(INST_COREDIR)" \
+ -machine:$(PROCESSOR_ARCHITECTURE)
+OBJOUT_FLAG = -Fo
+EXEOUT_FLAG = -Fe
+
+CFLAGS_O = $(CFLAGS) $(BUILDOPT)
+
+#################### do not edit below this line #######################
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+
+o = .obj
+
+#
+# Rules
+#
+
+.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
+
+.c$(o):
+ $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+
+.y.c:
+ $(NOOP)
+
+$(o).dll:
+ $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
+ -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+
+.rc.res:
+ $(RSC) -i.. $<
+
+#
+# various targets
+
+# makedef.pl must be updated if this changes, and this should normally
+# only change when there is an incompatible revision of the public API.
+PERLIMPLIB = ..\perl59.lib
+PERLDLL = ..\perl59.dll
+
+MINIPERL = ..\miniperl.exe
+MINIDIR = .\mini
+PERLEXE = ..\perl.exe
+WPERLEXE = ..\wperl.exe
+GLOBEXE = ..\perlglob.exe
+CONFIGPM = ..\lib\Config.pm
+MINIMOD = ..\lib\ExtUtils\Miniperl.pm
+X2P = ..\x2p\a2p.exe
+
+PERLEXE_ICO = .\perlexe.ico
+PERLEXE_RES = .\perlexe.res
+PERLDLL_RES =
+
+# Nominate a target which causes extensions to be re-built
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend
+# on and really only the interface - i.e. the .def file used to export symbols
+# from the .dll
+PERLDEP = perldll.def
+
+PL2BAT = bin\pl2bat.pl
+GLOBBAT = bin\perlglob.bat
+
+UTILS = \
+ ..\utils\h2ph \
+ ..\utils\splain \
+ ..\utils\dprofpp \
+ ..\utils\perlbug \
+ ..\utils\pl2pm \
+ ..\utils\c2ph \
+ ..\utils\pstruct \
+ ..\utils\h2xs \
+ ..\utils\perldoc \
+ ..\utils\perlcc \
+ ..\utils\perlivp \
+ ..\utils\libnetcfg \
+ ..\utils\enc2xs \
+ ..\utils\piconv \
+ ..\utils\cpan \
+ ..\utils\xsubpp \
+ ..\utils\prove \
+ ..\utils\instmodsh \
+ ..\pod\checkpods \
+ ..\pod\pod2html \
+ ..\pod\pod2latex \
+ ..\pod\pod2man \
+ ..\pod\pod2text \
+ ..\pod\pod2usage \
+ ..\pod\podchecker \
+ ..\pod\podselect \
+ ..\x2p\find2perl \
+ ..\x2p\psed \
+ ..\x2p\s2p \
+ bin\exetype.pl \
+ bin\runperl.pl \
+ bin\pl2bat.pl \
+ bin\perlglob.pl \
+ bin\search.pl
+
+MAKE = nmake -nologo
+MAKE_BARE = nmake
+
+!IF "$(WIN64)" == "define"
+CFGSH_TMPL = config.vc64
+CFGH_TMPL = config_H.vc64
+!ELSE
+CFGSH_TMPL = config.vc
+CFGH_TMPL = config_H.vc
+!ENDIF
+
+XCOPY = xcopy /f /r /i /d
+RCOPY = xcopy /f /r /i /e /d
+NOOP = @echo
+NULL =
+
+DEL = del
+
+#
+# filenames given to xsubpp must have forward slashes (since it puts
+# full pathnames in #line strings)
+XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
+ -C++ -prototypes
+
+MICROCORE_SRC = \
+ ..\av.c \
+ ..\deb.c \
+ ..\doio.c \
+ ..\doop.c \
+ ..\dump.c \
+ ..\globals.c \
+ ..\gv.c \
+ ..\hv.c \
+ ..\locale.c \
+ ..\mg.c \
+ ..\numeric.c \
+ ..\op.c \
+ ..\pad.c \
+ ..\perl.c \
+ ..\perlapi.c \
+ ..\perly.c \
+ ..\pp.c \
+ ..\pp_ctl.c \
+ ..\pp_hot.c \
+ ..\pp_pack.c \
+ ..\pp_sort.c \
+ ..\pp_sys.c \
+ ..\reentr.c \
+ ..\regcomp.c \
+ ..\regexec.c \
+ ..\run.c \
+ ..\scope.c \
+ ..\sv.c \
+ ..\taint.c \
+ ..\toke.c \
+ ..\universal.c \
+ ..\utf8.c \
+ ..\util.c \
+ ..\xsutils.c
+
+EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
+
+!IF "$(PERL_MALLOC)" == "define"
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
+!ENDIF
+
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
+
+WIN32_SRC = \
+ .\win32.c \
+ .\win32sck.c \
+ .\win32thread.c
+
+# We need this for miniperl build unless we override canned
+# config.h #define building mini\*
+#!IF "$(USE_PERLIO)" == "define"
+WIN32_SRC = $(WIN32_SRC) .\win32io.c
+#!ENDIF
+
+!IF "$(CRYPT_SRC)" != ""
+WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
+!ENDIF
+
+DLL_SRC = $(DYNALOADER).c
+
+X2P_SRC = \
+ ..\x2p\a2p.c \
+ ..\x2p\hash.c \
+ ..\x2p\str.c \
+ ..\x2p\util.c \
+ ..\x2p\walk.c
+
+CORE_NOCFG_H = \
+ ..\av.h \
+ ..\cop.h \
+ ..\cv.h \
+ ..\dosish.h \
+ ..\embed.h \
+ ..\form.h \
+ ..\gv.h \
+ ..\handy.h \
+ ..\hv.h \
+ ..\iperlsys.h \
+ ..\mg.h \
+ ..\nostdio.h \
+ ..\op.h \
+ ..\opcode.h \
+ ..\perl.h \
+ ..\perlapi.h \
+ ..\perlsdio.h \
+ ..\perlsfio.h \
+ ..\perly.h \
+ ..\pp.h \
+ ..\proto.h \
+ ..\regexp.h \
+ ..\scope.h \
+ ..\sv.h \
+ ..\thread.h \
+ ..\unixish.h \
+ ..\utf8.h \
+ ..\util.h \
+ ..\warnings.h \
+ ..\XSUB.h \
+ ..\EXTERN.h \
+ ..\perlvars.h \
+ ..\intrpvar.h \
+ ..\thrdvar.h \
+ .\include\dirent.h \
+ .\include\netdb.h \
+ .\include\sys\socket.h \
+ .\win32.h
+
+CORE_H = $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
+WIN32_OBJ = $(WIN32_SRC:.c=.obj)
+MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
+ $(MINIDIR)\miniperlmain$(o) \
+ $(MINIDIR)\perlio$(o)
+MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
+MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ = $(DLL_SRC:.c=.obj)
+X2P_OBJ = $(X2P_SRC:.c=.obj)
+
+PERLDLL_OBJ = $(CORE_OBJ)
+PERLEXE_OBJ = perlmain$(o)
+
+PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+
+!IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ = setargv$(o)
+!ENDIF
+
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
+SOCKET = $(EXTDIR)\Socket\Socket
+FCNTL = $(EXTDIR)\Fcntl\Fcntl
+OPCODE = $(EXTDIR)\Opcode\Opcode
+SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
+IO = $(EXTDIR)\IO\IO
+POSIX = $(EXTDIR)\POSIX\POSIX
+ATTRS = $(EXTDIR)\attrs\attrs
+THREAD = $(EXTDIR)\Thread\Thread
+B = $(EXTDIR)\B\B
+RE = $(EXTDIR)\re\re
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper
+ERRNO = $(EXTDIR)\Errno\Errno
+PEEK = $(EXTDIR)\Devel\Peek\Peek
+BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
+DPROF = $(EXTDIR)\Devel\DProf\DProf
+GLOB = $(EXTDIR)\File\Glob\Glob
+HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
+STORABLE = $(EXTDIR)\Storable\Storable
+FILTER = $(EXTDIR)\Filter\Util\Call\Call
+ENCODE = $(EXTDIR)\Encode\Encode
+MD5 = $(EXTDIR)\Digest\MD5\MD5
+PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
+MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
+TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
+CWD = $(EXTDIR)\Cwd\Cwd
+LISTUTIL = $(EXTDIR)\List\Util\Util
+PERLIOVIA = $(EXTDIR)\PerlIO\via\via
+XSAPITEST = $(EXTDIR)\XS\APItest\APItest
+XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
+UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
+
+SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
+FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
+OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
+SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
+IO_DLL = $(AUTODIR)\IO\IO.dll
+POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
+ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
+THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
+B_DLL = $(AUTODIR)\B\B.dll
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
+PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
+RE_DLL = $(AUTODIR)\re\re.dll
+BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
+DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
+GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
+HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
+STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
+FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
+ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
+MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
+PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
+MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
+TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
+CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
+LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
+PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
+XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
+XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
+UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
+
+EXTENSION_C = \
+ $(SOCKET).c \
+ $(FCNTL).c \
+ $(OPCODE).c \
+ $(SDBM_FILE).c \
+ $(IO).c \
+ $(POSIX).c \
+ $(ATTRS).c \
+ $(THREAD).c \
+ $(RE).c \
+ $(DUMPER).c \
+ $(PEEK).c \
+ $(B).c \
+ $(BYTELOADER).c \
+ $(DPROF).c \
+ $(GLOB).c \
+ $(HOSTNAME).c \
+ $(STORABLE).c \
+ $(FILTER).c \
+ $(ENCODE).c \
+ $(MD5).c \
+ $(PERLIOSCALAR).c \
+ $(MIMEBASE64).c \
+ $(TIMEHIRES).c \
+ $(CWD).c \
+ $(LISTUTIL).c \
+ $(PERLIOVIA).c \
+ $(XSAPITEST).c \
+ $(XSTYPEMAP).c \
+ $(UNICODENORMALIZE).c
+
+EXTENSION_DLL = \
+ $(SOCKET_DLL) \
+ $(FCNTL_DLL) \
+ $(OPCODE_DLL) \
+ $(SDBM_FILE_DLL)\
+ $(IO_DLL) \
+ $(POSIX_DLL) \
+ $(ATTRS_DLL) \
+ $(DUMPER_DLL) \
+ $(PEEK_DLL) \
+ $(B_DLL) \
+ $(RE_DLL) \
+ $(THREAD_DLL) \
+ $(BYTELOADER_DLL) \
+ $(DPROF_DLL) \
+ $(GLOB_DLL) \
+ $(HOSTNAME_DLL) \
+ $(STORABLE_DLL) \
+ $(FILTER_DLL) \
+ $(ENCODE_DLL) \
+ $(MD5_DLL) \
+ $(PERLIOSCALAR_DLL) \
+ $(MIMEBASE64_DLL) \
+ $(TIMEHIRES_DLL) \
+ $(CWD_DLL) \
+ $(LISTUTIL_DLL) \
+ $(PERLIOVIA_DLL) \
+ $(XSAPITEST_DLL) \
+ $(XSTYPEMAP_DLL) \
+ $(UNICODENORMALIZE_DLL)
+
+POD2HTML = $(PODDIR)\pod2html
+POD2MAN = $(PODDIR)\pod2man
+POD2LATEX = $(PODDIR)\pod2latex
+POD2TEXT = $(PODDIR)\pod2text
+
+CFG_VARS = \
+ "INST_DRV=$(INST_DRV)" \
+ "INST_TOP=$(INST_TOP)" \
+ "INST_VER=$(INST_VER)" \
+ "INST_ARCH=$(INST_ARCH)" \
+ "archname=$(ARCHNAME)" \
+ "cc=$(CC)" \
+ "ld=$(LINK32)" \
+ "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
+ "cf_email=$(EMAIL)" \
+ "d_crypt=$(D_CRYPT)" \
+ "d_mymalloc=$(PERL_MALLOC)" \
+ "libs=$(LIBFILES)" \
+ "incpath=$(CCINCDIR:"=\")" \
+ "libperl=$(PERLIMPLIB:..\=)" \
+ "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
+ "libc=$(LIBC)" \
+ "make=$(MAKE_BARE)" \
+ "usethreads=$(USE_ITHREADS)" \
+ "useithreads=$(USE_ITHREADS)" \
+ "usemultiplicity=$(USE_MULTI)" \
+ "useperlio=$(USE_PERLIO)" \
+ "uselargefiles=$(USE_LARGE_FILES)" \
+ "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
+ "optimize=$(OPTIMIZE:"=\")"
+
+#
+# Top targets
+#
+
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
+ $(X2P) Extensions
+ @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
+
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+
+#------------------------------------------------------------
+
+$(GLOBEXE) : perlglob$(o)
+ $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+ perlglob$(o) setargv$(o)
+
+perlglob$(o) : perlglob.c
+
+config.w32 : $(CFGSH_TMPL)
+ copy $(CFGSH_TMPL) config.w32
+
+.\config.h : $(CFGH_TMPL)
+ -del /f config.h
+ copy $(CFGH_TMPL) config.h
+
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL
+ $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
+
+# this target is for when changes to the main config.sh happen
+# edit config.{b,v,g}c and make this target once for each supported
+# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
+regen_config_h:
+ perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
+ cd ..
+ -del /f perl.exe perl*.dll
+ perl configpm
+ cd win32
+ -del /f $(CFGH_TMPL)
+ -mkdir $(COREDIR)
+ -perl config_h.PL "INST_VER=$(INST_VER)"
+ rename config.h $(CFGH_TMPL)
+
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
+ cd ..
+ miniperl configpm
+ cd win32
+ if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(XCOPY) *.h $(COREDIR)\*.*
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
+ $(RCOPY) include $(COREDIR)\*.*
+ -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
+
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
+ $(LINK32) -subsystem:console -out:$@ @<<
+ $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
+<<
+
+$(MINIDIR) :
+ if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
+ $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
+
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
+ $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
+
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
+!IF "$(USE_IMP_SYS)" == "define"
+perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+!ENDIF
+
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+$(MINI_OBJ) : $(CORE_NOCFG_H)
+
+$(WIN32_OBJ) : $(CORE_H)
+$(CORE_OBJ) : $(CORE_H)
+$(DLL_OBJ) : $(CORE_H)
+$(X2P_OBJ) : $(CORE_H)
+
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
+ CCTYPE=$(CCTYPE) > perldll.def
+
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
+ $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
+ $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
+<<
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+$(PERLEXE_ICO): $(MINIPERL) makeico.pl
+ $(MINIPERL) makeico.pl > $@
+
+$(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
+
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl
+ cd ..
+ miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+ cd win32
+
+..\x2p\a2p$(o) : ..\x2p\a2p.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
+
+..\x2p\hash$(o) : ..\x2p\hash.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
+
+..\x2p\str$(o) : ..\x2p\str.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
+
+..\x2p\util$(o) : ..\x2p\util.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
+
+..\x2p\walk$(o) : ..\x2p\walk.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
+
+$(X2P) : $(MINIPERL) $(X2P_OBJ)
+ $(MINIPERL) ..\x2p\find2perl.PL
+ $(MINIPERL) ..\x2p\s2p.PL
+ $(LINK32) -subsystem:console -out:$@ @<<
+ $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
+<<
+
+perlmain.c : runperl.c
+ copy runperl.c perlmain.c
+
+perlmain$(o) : perlmain.c
+ $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
+
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
+ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
+ copy $(PERLEXE) $(WPERLEXE)
+ $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
+ copy splittree.pl ..
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
+ if not exist $(AUTODIR) mkdir $(AUTODIR)
+ cd $(EXTDIR)\$(*B)
+ ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
+ ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
+ cd ..\..\win32
+ $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
+ $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
+ cd $(EXTDIR)\$(*B)
+ $(XSUBPP) dl_win32.xs > $(*B).c
+ cd ..\..\win32
+
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
+ copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+
+#----------------------------------------------------------------------------------
+Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
+
+Extensions_clean:
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
+
+Extensions_realclean:
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
+
+#----------------------------------------------------------------------------------
+
+doc: $(PERLEXE)
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
+ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
+ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+
+# Note that this next section is parsed (and regenerated) by pod/buildtoc
+# so please check that script before making structural changes here
+
+utils: $(PERLEXE) $(X2P)
+ cd ..\utils
+ $(MAKE) PERL=$(MINIPERL)
+ cd ..\pod
+ copy ..\vms\perlvms.pod .\perlvms.pod
+ copy ..\README.aix ..\pod\perlaix.pod
+ copy ..\README.amiga ..\pod\perlamiga.pod
+ copy ..\README.apollo ..\pod\perlapollo.pod
+ copy ..\README.beos ..\pod\perlbeos.pod
+ copy ..\README.bs2000 ..\pod\perlbs2000.pod
+ copy ..\README.ce ..\pod\perlce.pod
+ copy ..\README.cn ..\pod\perlcn.pod
+ copy ..\README.cygwin ..\pod\perlcygwin.pod
+ copy ..\README.dgux ..\pod\perldgux.pod
+ copy ..\README.dos ..\pod\perldos.pod
+ copy ..\README.epoc ..\pod\perlepoc.pod
+ copy ..\README.freebsd ..\pod\perlfreebsd.pod
+ copy ..\README.hpux ..\pod\perlhpux.pod
+ copy ..\README.hurd ..\pod\perlhurd.pod
+ copy ..\README.irix ..\pod\perlirix.pod
+ copy ..\README.jp ..\pod\perljp.pod
+ copy ..\README.ko ..\pod\perlko.pod
+ copy ..\README.machten ..\pod\perlmachten.pod
+ copy ..\README.macos ..\pod\perlmacos.pod
+ copy ..\README.macosx ..\pod\perlmacosx.pod
+ copy ..\README.mint ..\pod\perlmint.pod
+ copy ..\README.mpeix ..\pod\perlmpeix.pod
+ copy ..\README.netware ..\pod\perlnetware.pod
+ copy ..\README.os2 ..\pod\perlos2.pod
+ copy ..\README.os390 ..\pod\perlos390.pod
+ copy ..\README.os400 ..\pod\perlos400.pod
+ copy ..\README.plan9 ..\pod\perlplan9.pod
+ copy ..\README.qnx ..\pod\perlqnx.pod
+ copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.tru64 ..\pod\perltru64.pod
+ copy ..\README.tw ..\pod\perltw.pod
+ copy ..\README.uts ..\pod\perluts.pod
+ copy ..\README.vmesa ..\pod\perlvmesa.pod
+ copy ..\README.vms ..\pod\perlvms.pod
+ copy ..\README.vos ..\pod\perlvos.pod
+ copy ..\README.win32 ..\pod\perlwin32.pod
+ copy ..\pod\perl591delta.pod ..\pod\perldelta.pod
+ $(MAKE) -f ..\win32\pod.mak converters
+ cd ..\lib
+ $(PERLEXE) lib_pm.PL
+ cd ..\win32
+ $(PERLEXE) $(PL2BAT) $(UTILS)
+
+# Note that the pod cleanup in this next section is parsed (and regenerated
+# by pod/buildtoc so please check that script before making changes here
+
+# the doubled rmdir calls are needed because older cmd shells
+# don't understand /q
+distclean: realclean
+ -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
+ $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
+ -del /f *.def *.map
+ -del /f $(EXTENSION_DLL)
+ -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
+ -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
+ -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
+ -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
+ -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
+ -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
+ -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
+ -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
+ -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
+ -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+ -del /f $(LIBDIR)\ByteLoader.pm
+ -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
+ -del /f $(LIBDIR)\Devel\PPPort.pm
+ -del /f $(LIBDIR)\File\Glob.pm
+ -del /f $(LIBDIR)\Storable.pm
+ -del /f $(LIBDIR)\Digest\MD5.pm
+ -del /f $(LIBDIR)\PerlIO\encoding.pm
+ -del /f $(LIBDIR)\PerlIO\scalar.pm
+ -del /f $(LIBDIR)\PerlIO\via.pm
+ -del /f $(LIBDIR)\Sys\Hostname.pm
+ -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
+ -del /f $(LIBDIR)\threads\shared.pm
+ -del /f $(LIBDIR)\Time\HiRes.pm
+ -del /f $(LIBDIR)\Unicode\Normalize.pm
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
+ -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
+ -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
+ -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
+ -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
+ -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
+ -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
+ -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
+ -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
+ -cd $(PODDIR) && del /f *.html *.bat checkpods \
+ perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
+ perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
+ perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
+ perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
+ perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
+ perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
+ perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
+ perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
+ perluts.pod perlvmesa.pod perlvms.pod perlvos.pod perlwin32.pod \
+ pod2html pod2latex pod2man pod2text pod2usage \
+ podchecker podselect
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
+ perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
+ xsubpp instmodsh prove
+ -cd ..\x2p && del /f find2perl s2p psed *.bat
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
+ -del /f $(CONFIGPM)
+ -del /f bin\*.bat
+ -del /f $(PERLEXE_ICO)
+ -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
+ -if exist $(AUTODIR) rmdir /s $(AUTODIR)
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR)
+ -if exist $(COREDIR) rmdir /s $(COREDIR)
+
+install : all installbare installhtml
+
+installbare : utils
+ $(PERLEXE) ..\installperl
+ if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
+ $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+ $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
+
+installhtml : doc
+ $(RCOPY) html\*.* $(INST_HTML)\*.*
+
+inst_lib : $(CONFIGPM)
+ copy splittree.pl ..
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+ $(RCOPY) ..\lib $(INST_LIB)\*.*
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
+ $(XCOPY) $(MINIPERL) ..\t\perl.exe
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+ attrib -r ..\t\*.*
+ copy test ..\t
+ cd ..\t
+ $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
+ cd ..\win32
+
+test-prep : all utils
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+
+test : test-prep
+ cd ..\t
+ $(PERLEXE) -I..\lib harness
+ cd ..\win32
+
+test-notty : test-prep
+ set PERL_SKIP_TTY_TEST=1
+ cd ..\t
+ $(PERLEXE) -I..\lib harness
+ cd ..\win32
+
+_test :
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+ cd ..\t
+ $(PERLEXE) -I..\lib harness
+ cd ..\win32
+
+_clean :
+ -@$(DEL) miniperlmain$(o)
+ -@$(DEL) $(MINIPERL)
+ -@$(DEL) perlglob$(o)
+ -@$(DEL) perlmain$(o)
+ -@$(DEL) config.w32
+ -@$(DEL) config.h
+ -@$(DEL) $(GLOBEXE)
+ -@$(DEL) $(PERLEXE)
+ -@$(DEL) $(WPERLEXE)
+ -@$(DEL) $(PERLDLL)
+ -@$(DEL) $(CORE_OBJ)
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
+ -if exist $(MINIDIR) rmdir /s $(MINIDIR)
+ -@$(DEL) $(WIN32_OBJ)
+ -@$(DEL) $(DLL_OBJ)
+ -@$(DEL) $(X2P_OBJ)
+ -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
+ -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
+ -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
+ -@$(DEL) *.ilk
+ -@$(DEL) *.pdb
+
+clean : Extensions_clean _clean
+
+realclean : Extensions_realclean _clean
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "nmake nok" instead.
+ok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+
+nok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+
+nokfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok