# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER = \5.8.0
+#INST_VER = \5.9.1
#
# Comment this out if you DON'T want your perl installation to have
USE_PERLIO = define
#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities. This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS = define
+# Comment this out if you don't want to enable large file support for
+# some reason. Should normally only be changed to maintain compatibility
+# with an older release of perl.
+USE_LARGE_FILES = define
#
# uncomment one of the following lines if you are using either
# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
#
#CCTYPE = MSVC20
-#CCTYPE = MSVC60
+CCTYPE = MSVC60
#
# uncomment next line if you want debug version of perl (big,slow)
#USE_SETARGV = define
#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located in the same
-# directory as this file.
+# if you want to have the crypt() builtin function implemented, leave this or
+# CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
+# version of des_fcrypt().
#
-#CRYPT_SRC = fcrypt.c
+CRYPT_SRC = fcrypt.c
#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
#PERL_MALLOC = define
#
+# set this to enable debugging mstats
+# This must be enabled to use the Devel::Peek::mstat() function. This cannot
+# be enabled without PERL_MALLOC as well.
+#
+#DEBUG_MSTATS = define
+
+#
+#
# set the install locations of the compiler include/libraries
# Running VCVARS32.BAT is *required* when using Visual C.
# Some versions of Visual C don't define MSVCDIR in the environment,
!IF "$(PERL_MALLOC)" == ""
PERL_MALLOC = undef
+DEBUG_MSTATS = undef
!ENDIF
-!IF "$(USE_5005THREADS)" == ""
-USE_5005THREADS = undef
+!IF "$(DEBUG_MSTATS)" == ""
+DEBUG_MSTATS = undef
!ENDIF
-!IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS = undef
+!IF "$(DEBUG_MSTATS)" == "define"
+BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
!ENDIF
!IF "$(USE_IMP_SYS)" == "define"
USE_PERLIO = undef
!ENDIF
+!IF "$(USE_LARGE_FILES)" == ""
+USE_LARGE_FILES = undef
+!ENDIF
+
!IF "$(USE_PERLCRT)" == ""
USE_PERLCRT = undef
!ENDIF
-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
+!IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
USE_MULTI = define
!ENDIF
!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
USE_MULTI = define
-USE_5005THREADS = undef
!ENDIF
-!IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
+!IF "$(USE_MULTI)" != "undef"
BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
!ENDIF
!ENDIF
!ENDIF
-!IF "$(USE_5005THREADS)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-!ELSE
!IF "$(USE_MULTI)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
!ELSE
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
!ENDIF
!ENDIF
-!ENDIF
!IF "$(USE_PERLIO)" == "define"
BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
LIBC = PerlCRT.lib
!ENDIF
-PERLEXE_RES =
-PERLDLL_RES =
-
!IF "$(CFG)" == "Debug"
! IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
+PERLEXE_ICO = .\perlexe.ico
+PERLEXE_RES = .\perlexe.res
+PERLDLL_RES =
+
# Nominate a target which causes extensions to be re-built
# This used to be $(PERLEXE), but at worst it is the .dll that they depend
# on and really only the interface - i.e. the .def file used to export symbols
..\utils\libnetcfg \
..\utils\enc2xs \
..\utils\piconv \
+ ..\utils\cpan \
+ ..\utils\xsubpp \
+ ..\utils\prove \
+ ..\utils\instmodsh \
..\pod\checkpods \
..\pod\pod2html \
..\pod\pod2latex \
..\x2p\find2perl \
..\x2p\psed \
..\x2p\s2p \
- ..\lib\ExtUtils\xsubpp \
bin\exetype.pl \
bin\runperl.pl \
bin\pl2bat.pl \
..\mg.c \
..\numeric.c \
..\op.c \
+ ..\pad.c \
..\perl.c \
..\perlapi.c \
..\perly.c \
"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
"libc=$(LIBC)" \
"make=$(MAKE_BARE)" \
- "use5005threads=$(USE_5005THREADS)" \
+ "usethreads=$(USE_ITHREADS)" \
"useithreads=$(USE_ITHREADS)" \
- "usethreads=$(USE_5005THREADS)" \
"usemultiplicity=$(USE_MULTI)" \
"useperlio=$(USE_PERLIO)" \
+ "uselargefiles=$(USE_LARGE_FILES)" \
"LINK_FLAGS=$(LINK_FLAGS:"=\")" \
"optimize=$(OPTIMIZE:"=\")"
<<
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+$(PERLEXE_ICO): $(MINIPERL) makeico.pl
+ $(MINIPERL) makeico.pl > $@
+
+$(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
+
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd ..
miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
Extensions_clean:
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
+Extensions_realclean:
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
+
#----------------------------------------------------------------------------------
doc: $(PERLEXE)
--podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+# Note that this next section is parsed (and regenerated) by pod/buildtoc
+# so please check that script before making structural changes here
+
utils: $(PERLEXE) $(X2P)
cd ..\utils
$(MAKE) PERL=$(MINIPERL)
cd ..\pod
- copy ..\README.aix .\perlaix.pod
- copy ..\README.amiga .\perlamiga.pod
- copy ..\README.apollo .\perlapollo.pod
- copy ..\README.beos .\perlbeos.pod
- copy ..\README.bs2000 .\perlbs2000.pod
- copy ..\README.ce .\perlce.pod
- copy ..\README.cygwin .\perlcygwin.pod
- copy ..\README.dgux .\perldgux.pod
- copy ..\README.dos .\perldos.pod
- copy ..\README.epoc .\perlepoc.pod
- copy ..\README.freebsd .\perlfreebsd.pod
- copy ..\README.hurd .\perlhurd.pod
- copy ..\README.hpux .\perlhpux.pod
- copy ..\README.irix .\perlirix.pod
- copy ..\README.machten .\perlmachten.pod
- copy ..\README.macos .\perlmacos.pod
- copy ..\README.mint .\perlmint.pod
- copy ..\README.mpeix .\perlmpeix.pod
- copy ..\README.netware .\perlnetware.pod
- copy ..\README.os2 .\perlos2.pod
- copy ..\README.os390 .\perlos390.pod
- copy ..\README.os400 .\perlos400.pod
- copy ..\README.plan9 .\perlplan9.pod
- copy ..\README.qnx .\perlqnx.pod
- copy ..\README.solaris .\perlsolaris.pod
- copy ..\README.tru64 .\perltru64.pod
- copy ..\README.uts .\perluts.pod
- copy ..\README.vmesa .\perlvmesa.pod
copy ..\vms\perlvms.pod .\perlvms.pod
- copy ..\README.vos .\perlvos.pod
- copy ..\README.win32 .\perlwin32.pod
+ copy ..\README.aix ..\pod\perlaix.pod
+ copy ..\README.amiga ..\pod\perlamiga.pod
+ copy ..\README.apollo ..\pod\perlapollo.pod
+ copy ..\README.beos ..\pod\perlbeos.pod
+ copy ..\README.bs2000 ..\pod\perlbs2000.pod
+ copy ..\README.ce ..\pod\perlce.pod
+ copy ..\README.cn ..\pod\perlcn.pod
+ copy ..\README.cygwin ..\pod\perlcygwin.pod
+ copy ..\README.dgux ..\pod\perldgux.pod
+ copy ..\README.dos ..\pod\perldos.pod
+ copy ..\README.epoc ..\pod\perlepoc.pod
+ copy ..\README.freebsd ..\pod\perlfreebsd.pod
+ copy ..\README.hpux ..\pod\perlhpux.pod
+ copy ..\README.hurd ..\pod\perlhurd.pod
+ copy ..\README.irix ..\pod\perlirix.pod
+ copy ..\README.jp ..\pod\perljp.pod
+ copy ..\README.ko ..\pod\perlko.pod
+ copy ..\README.machten ..\pod\perlmachten.pod
+ copy ..\README.macos ..\pod\perlmacos.pod
+ copy ..\README.macosx ..\pod\perlmacosx.pod
+ copy ..\README.mint ..\pod\perlmint.pod
+ copy ..\README.mpeix ..\pod\perlmpeix.pod
+ copy ..\README.netware ..\pod\perlnetware.pod
+ copy ..\README.os2 ..\pod\perlos2.pod
+ copy ..\README.os390 ..\pod\perlos390.pod
+ copy ..\README.os400 ..\pod\perlos400.pod
+ copy ..\README.plan9 ..\pod\perlplan9.pod
+ copy ..\README.qnx ..\pod\perlqnx.pod
+ copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.tru64 ..\pod\perltru64.pod
+ copy ..\README.tw ..\pod\perltw.pod
+ copy ..\README.uts ..\pod\perluts.pod
+ copy ..\README.vmesa ..\pod\perlvmesa.pod
+ copy ..\README.vms ..\pod\perlvms.pod
+ copy ..\README.vos ..\pod\perlvos.pod
+ copy ..\README.win32 ..\pod\perlwin32.pod
+ copy ..\pod\perl591delta.pod ..\pod\perldelta.pod
$(MAKE) -f ..\win32\pod.mak converters
cd ..\lib
$(PERLEXE) lib_pm.PL
cd ..\win32
$(PERLEXE) $(PL2BAT) $(UTILS)
-distclean: clean
+# Note that the pod cleanup in this next section is parsed (and regenerated
+# by pod/buildtoc so please check that script before making changes here
+
+# the doubled rmdir calls are needed because older cmd shells
+# don't understand /q
+distclean: realclean
-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
-del /f *.def *.map
-del /f $(EXTENSION_DLL)
-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
+ -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
+ -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
+ -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
+ -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm
+ -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
+ -del /f $(LIBDIR)\ByteLoader.pm
-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
+ -del /f $(LIBDIR)\Devel\PPPort.pm
-del /f $(LIBDIR)\File\Glob.pm
-del /f $(LIBDIR)\Storable.pm
- -del /f $(LIBDIR)\Filter\Util\Call.pm
-del /f $(LIBDIR)\Digest\MD5.pm
+ -del /f $(LIBDIR)\PerlIO\encoding.pm
-del /f $(LIBDIR)\PerlIO\scalar.pm
-del /f $(LIBDIR)\PerlIO\via.pm
- -del /f $(LIBDIR)\MIME\Base64.pm
- -del /f $(LIBDIR)\MIME\QuotedPrint.pm
- -del /f $(LIBDIR)\List\Util.pm
- -del /f $(LIBDIR)\Scalar\Util.pm
+ -del /f $(LIBDIR)\Sys\Hostname.pm
+ -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
+ -del /f $(LIBDIR)\threads\shared.pm
-del /f $(LIBDIR)\Time\HiRes.pm
- -del /f $(LIBDIR)\XS\APItest.pm
- -del /f $(LIBDIR)\XS\Typemap.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
- -rmdir /s $(LIBDIR)\IO
+ -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
- -rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
- -rmdir /s $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
+ -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
- -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
- -rmdir /s $(LIBDIR)\Digest
+ -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
- -rmdir /s $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
- -rmdir /s $(LIBDIR)\List
+ -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
- -rmdir /s $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
- -rmdir /s $(LIBDIR)\XS
- cd $(PODDIR)
- -del /f *.html *.bat checkpods \
+ -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
+ -cd $(PODDIR) && del /f *.html *.bat checkpods \
perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
- perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
- perldos.pod perlepoc.pod perlfreebsd.pod perlhurd.pod \
- perlhpux.pod perlirix.pod perlmachten.pod \
- perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
+ perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
+ perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
+ perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
+ perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
+ perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
- perlqnx.pod perlsolaris.pod perltru64.pod perluts.pod \
- perlvmesa.pod perlvms.pod perlvos.pod \
- perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
+ perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
+ perluts.pod perlvmesa.pod perlvms.pod perlvos.pod perlwin32.pod \
+ pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
- cd ..\utils
- -del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs perldoc perlivp \
- dprofpp perlcc libnetcfg enc2xs piconv
- -del /f *.bat
- cd ..\win32
- cd ..\x2p
- -del /f find2perl s2p psed
- -del /f *.bat
- cd ..\win32
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
+ perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
+ xsubpp instmodsh prove
+ -cd ..\x2p && del /f find2perl s2p psed *.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
- cd ..
- -del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
- cd win32
- cd $(EXTDIR)
- -del /s *.def Makefile Makefile.old
- cd ..\win32
+ -del /f $(PERLEXE_ICO)
+ -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
- -rmdir /s $(AUTODIR)
+ -if exist $(AUTODIR) rmdir /s $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR)
- -rmdir /s $(COREDIR)
+ -if exist $(COREDIR) rmdir /s $(COREDIR)
install : all installbare installhtml
$(PERLEXE) -I..\lib harness
cd ..\win32
-test-wide : test-prep
- set HARNESS_PERL_SWITCHES=-C
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
-test-wide-notty : test-prep
- set PERL_SKIP_TTY_TEST=1
- set HARNESS_PERL_SWITCHES=-C
- cd ..\t
- $(PERLEXE) -I..\lib harness
- cd ..\win32
-
_test :
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
$(PERLEXE) -I..\lib harness
cd ..\win32
-clean : Extensions_clean
+_clean :
-@$(DEL) miniperlmain$(o)
-@$(DEL) $(MINIPERL)
-@$(DEL) perlglob$(o)
-@$(DEL) $(PERLDLL)
-@$(DEL) $(CORE_OBJ)
-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
- -rmdir /s $(MINIDIR)
+ -if exist $(MINIDIR) rmdir /s $(MINIDIR)
-@$(DEL) $(WIN32_OBJ)
-@$(DEL) $(DLL_OBJ)
-@$(DEL) $(X2P_OBJ)
-@$(DEL) *.ilk
-@$(DEL) *.pdb
+clean : Extensions_clean _clean
+
+realclean : Extensions_realclean _clean
+
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.