# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER = \5.9.2
+#INST_VER = \5.9.3
#
# Comment this out if you DON'T want your perl installation to have
# the same location. Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
-#INST_ARCH = \$(ARCHNAME)
+#INST_ARCH = \$(ARCHNAME)
+
+#
+# Uncomment this if you want perl to run
+# $Config{sitelibexp}\sitecustomize.pl
+# before anything else. This script can then be set up, for example,
+# to add additional entries to @INC.
+#
+#USE_SITECUST = define
#
# uncomment to enable multiple interpreters. This is need for fork()
# emulation and for thread support.
#
-USE_MULTI = define
+USE_MULTI = define
#
# Beginnings of interpreter cloning/threads; now reasonably complete.
# This should be enabled to get the fork() emulation. This needs
# USE_MULTI as well.
#
-USE_ITHREADS = define
+USE_ITHREADS = define
#
# uncomment to enable the implicit "host" layer for all system calls
# made by perl. This needs USE_MULTI above. This is also needed to
# get fork().
#
-USE_IMP_SYS = define
+USE_IMP_SYS = define
#
# Comment out next assign to disable perl's I/O subsystem and use compiler's
# Comment this out if you don't want to enable large file support for
# some reason. Should normally only be changed to maintain compatibility
# with an older release of perl.
-USE_LARGE_FILES = define
+USE_LARGE_FILES = define
#
# uncomment one of the following lines if you are using either
# This must be enabled to use the Devel::Peek::mstat() function. This cannot
# be enabled without PERL_MALLOC as well.
#
-#DEBUG_MSTATS = define
+#DEBUG_MSTATS = define
#
#
#
# Additional compiler flags can be specified here.
#
+BUILDOPT = $(BUILDOPTEXTRA)
+
+#
+# Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
+# internal hash function unless the PERL_HASH_SEED environment variable is set.
+# Alternatively, adding -DNO_HASH_SEED will completely disable the
+# randomization feature.
+# The latter is required to maintain binary compatibility with Perl 5.8.0.
+#
+#BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
+#BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
#
# This should normally be disabled. Adding -DPERL_POLLUTE enables support
#
# This should normally be disabled. Enabling it causes perl to read scripts
# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#
#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
#
CRYPT_FLAG = -DHAVE_DES_FCRYPT
!ENDIF
+!IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC = undef
+DEBUG_MSTATS = undef
+!ENDIF
+
!IF "$(PERL_MALLOC)" == ""
PERL_MALLOC = undef
-DEBUG_MSTATS = undef
+DEBUG_MSTATS = undef
!ENDIF
!IF "$(DEBUG_MSTATS)" == ""
-DEBUG_MSTATS = undef
+DEBUG_MSTATS = undef
!ENDIF
!IF "$(DEBUG_MSTATS)" == "define"
-BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
+BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
!ENDIF
-!IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC = undef
+!IF "$(USE_SITECUST)" == ""
+USE_SITECUST = undef
!ENDIF
!IF "$(USE_MULTI)" == ""
USE_MULTI = define
!ENDIF
+!IF "$(USE_SITECUST)" == "define"
+BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
+!ENDIF
+
!IF "$(USE_MULTI)" != "undef"
BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
!ENDIF
# VC 6.0 can load the socket dll on demand. Makes the test suite
# run in about 10% less time.
-DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
+DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
!ENDIF
ARCHDIR = ..\lib\$(ARCHNAME)
! ENDIF
LINK_DBG = -debug
!ELSE
-OPTIMIZE = -MD -DNDEBUG
-LINK_DBG = -release
+OPTIMIZE = -MD -Zi -DNDEBUG
+# we enable debug symbols in release builds also
+LINK_DBG = -debug -opt:ref,icf
+# you may want to enable this if you want COFF symbols in the executables
+# in addition to the PDB symbols. The default Dr. Watson that ships with
+# Windows can use the the former but not latter. The free WinDbg can be
+# installed to get better stack traces from just the PDB symbols, so we
+# avoid the bloat of COFF symbols by default.
+#LINK_DBG = $(LINK_DBG) -debugtype:both
! IF "$(WIN64)" == "define"
# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
OPTIMIZE = $(OPTIMIZE) -Ox -GL
LIBBASEFILES = $(CRYPT_LIB) \
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
version.lib
# win64 doesn't have some libs
PERLEXE = ..\perl.exe
WPERLEXE = ..\wperl.exe
GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
+CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
+# Unicode data files generated by mktables
+UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
+ ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
+ ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
+ ..\lib\unicore\PVA.pl
+
+# Directories of Unicode data files generated by mktables
+UNIDATADIR1 = ..\lib\unicore\To
+UNIDATADIR2 = ..\lib\unicore\lib
+
PERLEXE_ICO = .\perlexe.ico
PERLEXE_RES = .\perlexe.res
PERLDLL_RES =
..\utils\libnetcfg \
..\utils\enc2xs \
..\utils\piconv \
+ ..\utils\corelist \
..\utils\cpan \
..\utils\xsubpp \
..\utils\prove \
+ ..\utils\ptar \
..\utils\instmodsh \
..\pod\checkpods \
..\pod\pod2html \
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
+NOOP = @rem
NULL =
DEL = del
..\perly.h \
..\pp.h \
..\proto.h \
+ ..\regcomp.h \
..\regexp.h \
..\scope.h \
..\sv.h \
SETARGV_OBJ = setargv$(o)
!ENDIF
+# specify static extensions here
+#STATIC_EXT = Cwd Compress/Zlib
+STATIC_EXT =
+
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
SOCKET = $(EXTDIR)\Socket\Socket
FCNTL = $(EXTDIR)\Fcntl\Fcntl
XSAPITEST = $(EXTDIR)\XS\APItest\APItest
XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
+MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
+COMPRESSZLIB = $(EXTDIR)\Compress\Zlib\Zlib
+WIN32_DIR = ext\Win32
SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
+MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
+COMPRESSZLIB_DLL = $(AUTODIR)\Compress\Zlib\Zlib.dll
+WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
EXTENSION_C = \
$(SOCKET).c \
$(PERLIOVIA).c \
$(XSAPITEST).c \
$(XSTYPEMAP).c \
- $(UNICODENORMALIZE).c
+ $(UNICODENORMALIZE).c \
+ $(MATHBIGINTFASTCALC).c \
+ $(COMPRESSZLIB).c \
+ $(WIN32_DIR).c
EXTENSION_DLL = \
$(SOCKET_DLL) \
$(PERLIOVIA_DLL) \
$(XSAPITEST_DLL) \
$(XSTYPEMAP_DLL) \
- $(UNICODENORMALIZE_DLL)
+ $(UNICODENORMALIZE_DLL) \
+ $(MATHBIGINTFASTCALC_DLL) \
+ $(COMPRESSZLIB_DLL) \
+ $(WIN32_DLL)
POD2HTML = $(PODDIR)\pod2html
POD2MAN = $(PODDIR)\pod2man
"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
"libc=$(LIBC)" \
"make=$(MAKE_BARE)" \
+ "static_ext=$(STATIC_EXT)" \
"usethreads=$(USE_ITHREADS)" \
"useithreads=$(USE_ITHREADS)" \
"usemultiplicity=$(USE_MULTI)" \
"useperlio=$(USE_PERLIO)" \
"uselargefiles=$(USE_LARGE_FILES)" \
+ "usesitecustomize=$(USE_SITECUST)" \
"LINK_FLAGS=$(LINK_FLAGS:"=\")" \
"optimize=$(OPTIMIZE:"=\")"
# Top targets
#
-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
$(X2P) Extensions
@echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
$(X2P_OBJ) : $(CORE_H)
perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+ $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
CCTYPE=$(CCTYPE) > perldll.def
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
- $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
+ $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<<
$(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
<<
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-#----------------------------------------------------------------------------------
+#-------------------------------------------------------------------------------
Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
-# Note: The next two targets explicitly remove a "blibdirs.exists" file that
-# currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
+Extensions_static : buildext.pl
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
+ $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
Extensions_clean:
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
Extensions_realclean:
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
-#----------------------------------------------------------------------------------
+#-------------------------------------------------------------------------------
doc: $(PERLEXE)
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
copy ..\README.mint ..\pod\perlmint.pod
copy ..\README.mpeix ..\pod\perlmpeix.pod
copy ..\README.netware ..\pod\perlnetware.pod
+ copy ..\README.openbsd ..\pod\perlopenbsd.pod
copy ..\README.os2 ..\pod\perlos2.pod
copy ..\README.os390 ..\pod\perlos390.pod
copy ..\README.os400 ..\pod\perlos400.pod
copy ..\README.plan9 ..\pod\perlplan9.pod
copy ..\README.qnx ..\pod\perlqnx.pod
copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.symbian ..\pod\perlsymbian.pod
copy ..\README.tru64 ..\pod\perltru64.pod
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.uts ..\pod\perluts.pod
copy ..\README.vms ..\pod\perlvms.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perl591delta.pod ..\pod\perldelta.pod
+ copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
$(MAKE) -f ..\win32\pod.mak converters
cd ..\lib
$(PERLEXE) lib_pm.PL
-del /f $(LIBDIR)\threads\shared.pm
-del /f $(LIBDIR)\Time\HiRes.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
- -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
+ -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
+ -del /f $(LIBDIR)\Win32.pm
+ -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
+ -if exist $(LIBDIR)\IO\Socket rmdir /s $(LIBDIR)\IO\Socket
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
-if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
-if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
-if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
+ -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
+ -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
+ -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
-cd $(PODDIR) && del /f *.html *.bat checkpods \
perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
- perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
- perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
- perluts.pod perlvmesa.pod perlvms.pod perlvos.pod perlwin32.pod \
+ perlopenbsd.pod perlos2.pod perlos390.pod perlos400.pod \
+ perlplan9.pod perlqnx.pod perlsolaris.pod perlsymbian.pod \
+ perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvms.pod \
+ perlvms.pod perlvos.pod perlwin32.pod \
pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
- xsubpp instmodsh prove
+ xsubpp instmodsh prove ptar corelist
-cd ..\x2p && del /f find2perl s2p psed *.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
- -del /f $(PERLEXE_ICO)
+ -del /f perllibst.h
+ -del /f $(PERLEXE_ICO) perl.base
-cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
$(PERLEXE) ..\installperl
if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+ if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
+ if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
installhtml : doc
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
+$(UNIDATAFILES) : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
+ cd ..\lib\unicore && \
+ ..\$(MINIPERL) -I.. mktables
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils $(UNIDATAFILES)
$(XCOPY) $(MINIPERL) ..\t\$(NULL)
if exist ..\t\perl.exe del /f ..\t\perl.exe
rename ..\t\miniperl.exe perl.exe
test : test-prep
cd ..\t
- $(PERLEXE) -I..\lib harness
+ $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
cd ..\win32
test-notty : test-prep
set PERL_SKIP_TTY_TEST=1
cd ..\t
- $(PERLEXE) -I..\lib harness
+ $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
cd ..\win32
_test :
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
cd ..\t
- $(PERLEXE) -I..\lib harness
+ $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
cd ..\win32
+# the doubled rmdir calls are needed because older cmd shells
+# don't understand /q
_clean :
-@$(DEL) miniperlmain$(o)
-@$(DEL) $(MINIPERL)
-@$(DEL) $(CORE_OBJ)
-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
-if exist $(MINIDIR) rmdir /s $(MINIDIR)
+ -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
+ -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
+ -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
+ -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
+ -@$(DEL) $(UNIDATAFILES)
-@$(DEL) $(WIN32_OBJ)
-@$(DEL) $(DLL_OBJ)
-@$(DEL) $(X2P_OBJ)
-@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
-@$(DEL) *.ilk
-@$(DEL) *.pdb
+ -@$(DEL) Extensions_static
clean : Extensions_clean _clean