# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER = \5.9.2
+#INST_VER = \5.9.3
#
# Comment this out if you DON'T want your perl installation to have
# the same location. Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
-#INST_ARCH = \$(ARCHNAME)
+#INST_ARCH = \$(ARCHNAME)
+
+#
+# Uncomment this if you want perl to run
+# $Config{sitelibexp}\sitecustomize.pl
+# before anything else. This script can then be set up, for example,
+# to add additional entries to @INC.
+#
+#USE_SITECUST = define
#
# uncomment to enable multiple interpreters. This is need for fork()
# emulation and for thread support.
#
-USE_MULTI = define
+USE_MULTI = define
#
# Beginnings of interpreter cloning/threads; now reasonably complete.
# This should be enabled to get the fork() emulation. This needs
# USE_MULTI as well.
#
-USE_ITHREADS = define
+USE_ITHREADS = define
#
# uncomment to enable the implicit "host" layer for all system calls
# made by perl. This needs USE_MULTI above. This is also needed to
# get fork().
#
-USE_IMP_SYS = define
+USE_IMP_SYS = define
#
# Comment out next assign to disable perl's I/O subsystem and use compiler's
# Comment this out if you don't want to enable large file support for
# some reason. Should normally only be changed to maintain compatibility
# with an older release of perl.
-USE_LARGE_FILES = define
+USE_LARGE_FILES = define
#
# uncomment one of the following lines if you are using either
# This must be enabled to use the Devel::Peek::mstat() function. This cannot
# be enabled without PERL_MALLOC as well.
#
-#DEBUG_MSTATS = define
+#DEBUG_MSTATS = define
#
#
#
#
+# Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
+# internal hash function unless the PERL_HASH_SEED environment variable is set.
+# Alternatively, adding -DNO_HASH_SEED will completely disable the
+# randomization feature.
+# The latter is required to maintain binary compatibility with Perl 5.8.0.
+#
+#BUILDOPT = $(BUILDOPT) -DPERL_HASH_SEED_EXPLICIT
+#BUILDOPT = $(BUILDOPT) -DNO_HASH_SEED
+
+#
# This should normally be disabled. Adding -DPERL_POLLUTE enables support
# for old symbols by default, at the expense of extreme pollution. You most
# probably just want to build modules that won't compile with
#
# This should normally be disabled. Enabling it causes perl to read scripts
# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#
#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
#
CRYPT_FLAG = -DHAVE_DES_FCRYPT
!ENDIF
+!IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC = undef
+DEBUG_MSTATS = undef
+!ENDIF
+
!IF "$(PERL_MALLOC)" == ""
PERL_MALLOC = undef
-DEBUG_MSTATS = undef
+DEBUG_MSTATS = undef
!ENDIF
!IF "$(DEBUG_MSTATS)" == ""
-DEBUG_MSTATS = undef
+DEBUG_MSTATS = undef
!ENDIF
!IF "$(DEBUG_MSTATS)" == "define"
-BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
+BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS
!ENDIF
-!IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC = undef
+!IF "$(USE_SITECUST)" == ""
+USE_SITECUST = undef
!ENDIF
!IF "$(USE_MULTI)" == ""
USE_MULTI = define
!ENDIF
+!IF "$(USE_SITECUST)" == "define"
+BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE
+!ENDIF
+
!IF "$(USE_MULTI)" != "undef"
BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
!ENDIF
PERLEXE = ..\perl.exe
WPERLEXE = ..\wperl.exe
GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
+CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
..\utils\libnetcfg \
..\utils\enc2xs \
..\utils\piconv \
+ ..\utils\corelist \
..\utils\cpan \
..\utils\xsubpp \
..\utils\prove \
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
+NOOP = @rem
NULL =
DEL = del
..\perly.h \
..\pp.h \
..\proto.h \
+ ..\regcomp.h \
..\regexp.h \
..\scope.h \
..\sv.h \
XSAPITEST = $(EXTDIR)\XS\APItest\APItest
XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
+MATHBIGINTFASTCALC = $(EXTDIR)\Math\BigInt\FastCalc\FastCalc
WIN32_DIR = ext\Win32
SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
+MATHBIGINTFASTCALC_DLL = $(AUTODIR)\Math\BigInt\FastCalc\FastCalc.dll
WIN32_DLL = $(AUTODIR)\Win32\Win32.dll
EXTENSION_C = \
$(XSAPITEST).c \
$(XSTYPEMAP).c \
$(UNICODENORMALIZE).c \
+ $(MATHBIGINTFASTCALC).c \
$(WIN32_DIR).c
EXTENSION_DLL = \
$(XSAPITEST_DLL) \
$(XSTYPEMAP_DLL) \
$(UNICODENORMALIZE_DLL) \
+ $(MATHBIGINTFASTCALC_DLL) \
$(WIN32_DLL)
POD2HTML = $(PODDIR)\pod2html
"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
"libc=$(LIBC)" \
"make=$(MAKE_BARE)" \
+ "static_ext=$(STATIC_EXT)" \
"usethreads=$(USE_ITHREADS)" \
"useithreads=$(USE_ITHREADS)" \
"usemultiplicity=$(USE_MULTI)" \
"useperlio=$(USE_PERLIO)" \
"uselargefiles=$(USE_LARGE_FILES)" \
+ "usesitecustomize=$(USE_SITECUST)" \
"LINK_FLAGS=$(LINK_FLAGS:"=\")" \
"optimize=$(OPTIMIZE:"=\")"
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-#----------------------------------------------------------------------------------
+#-------------------------------------------------------------------------------
Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext
-# Note: The next two targets explicitly remove a "blibdirs.exists" file that
-# currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
-
Extensions_clean:
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
Extensions_realclean:
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
-#----------------------------------------------------------------------------------
+#-------------------------------------------------------------------------------
doc: $(PERLEXE)
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
copy ..\README.plan9 ..\pod\perlplan9.pod
copy ..\README.qnx ..\pod\perlqnx.pod
copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.symbian ..\pod\perlsymbian.pod
copy ..\README.tru64 ..\pod\perltru64.pod
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.uts ..\pod\perluts.pod
copy ..\README.vms ..\pod\perlvms.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perl592delta.pod ..\pod\perldelta.pod
+ copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
$(MAKE) -f ..\win32\pod.mak converters
cd ..\lib
$(PERLEXE) lib_pm.PL
-del /f $(LIBDIR)\threads\shared.pm
-del /f $(LIBDIR)\Time\HiRes.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
+ -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
-del /f $(LIBDIR)\Win32.pm
-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
-if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
-if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
-if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
+ -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
+ -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
+ -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
-cd $(PODDIR) && del /f *.html *.bat checkpods \
perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
- perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
- perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
- perlwin32.pod \
+ perlqnx.pod perlsolaris.pod perlsymbian.pod perltru64.pod \
+ perltw.pod perluts.pod perlvmesa.pod perlvms.pod perlvms.pod \
+ perlvos.pod perlwin32.pod \
pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
- xsubpp instmodsh prove
+ xsubpp instmodsh prove corelist
-cd ..\x2p && del /f find2perl s2p psed *.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
test : test-prep
cd ..\t
- $(PERLEXE) -I..\lib harness
+ $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
cd ..\win32
test-notty : test-prep
set PERL_SKIP_TTY_TEST=1
cd ..\t
- $(PERLEXE) -I..\lib harness
+ $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
cd ..\win32
_test :
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
cd ..\t
- $(PERLEXE) -I..\lib harness
+ $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
cd ..\win32
# the doubled rmdir calls are needed because older cmd shells
projects / p5sagit/p5-mst-13.2.git / blobdiff