#
# Makefile to build perl on Windows NT using Microsoft NMAKE.
# Supported compilers:
-# Visual C++ 5.x (possibly other versions)
+# Visual C++ 2.0 through 6.0 (and possibly newer versions)
+# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl57.dll). Also makes individual DLLs for the XS extensions.
+# (perl58.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER = \5.7.2
+#INST_VER = \5.7.3
#
# Comment this out if you DON'T want your perl installation to have
#
# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
+# emulation and for thread support.
#
USE_MULTI = define
#
-# Beginnings of interpreter cloning/threads; still very incomplete.
+# Beginnings of interpreter cloning/threads; now reasonably complete.
# This should be enabled to get the fork() emulation. This needs
# USE_MULTI as well.
#
USE_IMP_SYS = define
#
-# uncomment to enable the experimental PerlIO I/O subsystem.
+# Comment out next assign to disable perl's I/O subsystem and use compiler's
+# stdio for IO - depending on your compiler vendor and run time library you may
+# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
+# You will also be unable to take full advantage of perl5.8's support for multiple
+# encodings and may see lower IO performance. You have been warned.
USE_PERLIO = define
#
#
# uncomment next line if you want debug version of perl (big,slow)
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
#
#CFG = Debug
PROCESSOR_ARCHITECTURE = x86
!ENDIF
+!IF "$(WIN64)" == ""
+!IF "$(PROCESSOR_ARCHITEW6432)" != ""
+PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
+WIN64 = define
+!ELSE
+!IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
+WIN64 = define
+!ELSE
+WIN64 = undef
+!ENDIF
+!ENDIF
+!ENDIF
+
!IF "$(USE_5005THREADS)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
!ELSE
! ELSE
OPTIMIZE = -Od -MD -Zi -DDEBUGGING
! ENDIF
-LINK_DBG = -debug -pdb:none
+LINK_DBG = -debug
!ELSE
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
+OPTIMIZE = -MD -DNDEBUG
LINK_DBG = -release
+! IF "$(WIN64)" == "define"
+# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
+OPTIMIZE = $(OPTIMIZE) -Ox -GL
+LINK_DBG = $(LINK_DBG) -ltcg
+! ELSE
+# -O1 yields smaller code, which turns out to be faster than -O2 on x86
+OPTIMIZE = $(OPTIMIZE) -O1
+#OPTIMIZE = $(OPTIMIZE) -O2
+! ENDIF
+!ENDIF
+
+!IF "$(WIN64)" == "define"
+DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
+OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
!ENDIF
!IF "$(USE_PERLCRT)" != "define"
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
+ version.lib
+
+# win64 doesn't have some libs
+!IF "$(WIN64)" != "define"
+LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
+!ENDIF
# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-# XXX so why did we change it from perl56 to perl57?
-PERLIMPLIB = ..\perl57.lib
-PERLDLL = ..\perl57.dll
+PERLIMPLIB = ..\perl58.lib
+PERLDLL = ..\perl58.dll
MINIPERL = ..\miniperl.exe
MINIDIR = .\mini
..\utils\perlbug \
..\utils\pl2pm \
..\utils\c2ph \
+ ..\utils\pstruct \
..\utils\h2xs \
..\utils\perldoc \
..\utils\perlcc \
..\utils\perlivp \
..\utils\libnetcfg \
+ ..\utils\enc2xs \
+ ..\utils\piconv \
..\pod\checkpods \
..\pod\pod2html \
..\pod\pod2latex \
..\pod\podchecker \
..\pod\podselect \
..\x2p\find2perl \
+ ..\x2p\psed \
..\x2p\s2p \
..\lib\ExtUtils\xsubpp \
bin\exetype.pl \
MAKE = nmake -nologo
MAKE_BARE = nmake
+!IF "$(WIN64)" == "define"
+CFGSH_TMPL = config.vc64
+CFGH_TMPL = config_H.vc64
+!ELSE
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
+!ENDIF
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
..\pp_ctl.c \
..\pp_hot.c \
..\pp_pack.c \
+ ..\pp_sort.c \
..\pp_sys.c \
+ ..\reentr.c \
..\regcomp.c \
..\regexec.c \
..\run.c \
..\scope.c \
- ..\sharedsv.c \
..\sv.c \
..\taint.c \
..\toke.c \
.\win32sck.c \
.\win32thread.c
-!IF "$(USE_PERLIO)" == "define"
+# We need this for miniperl build unless we override canned
+# config.h #define building mini\*
+#!IF "$(USE_PERLIO)" == "define"
WIN32_SRC = $(WIN32_SRC) .\win32io.c
-!ENDIF
+#!ENDIF
!IF "$(CRYPT_SRC)" != ""
WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
..\proto.h \
..\regexp.h \
..\scope.h \
- ..\sharedsv.h \
..\sv.h \
..\thread.h \
..\unixish.h \
regen_config_h:
perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
cd ..
- -del /f perl.exe
+ -del /f perl.exe perl*.dll
perl configpm
cd win32
-del /f $(CFGH_TMPL)
-mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ -perl config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-del /f $(LIBDIR)\XSLoader.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
cd ..\utils
- -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc perlivp dprofpp
+ -del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs perldoc perlivp \
+ dprofpp perlcc libnetcfg enc2xs piconv
-del /f *.bat
cd ..\win32
cd ..\x2p
- -del /f find2perl s2p
+ -del /f find2perl s2p psed
-del /f *.bat
cd ..\win32
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
+ cd ..
+ -del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ cd win32
cd $(EXTDIR)
- -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
+ -del /s *.def Makefile Makefile.old
cd ..\win32
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
-rmdir /s $(AUTODIR)
$(PERLEXE) -I..\lib harness
cd ..\win32
+_test :
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+ cd ..\t
+ $(PERLEXE) -I..\lib harness
+ cd ..\win32
+
clean : Extensions_clean
-@$(DEL) miniperlmain$(o)
-@$(DEL) $(MINIPERL)