#
# Makefile to build perl on Windows NT using Microsoft NMAKE.
+# Supported compilers:
+# Visual C++ 2.0 through 6.0 (and possibly newer versions)
+# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl56.dll). Also makes individual DLLs for the XS extensions.
+# (perl58.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-INST_VER = \5.6.0
+#INST_VER = \5.8.0
#
# Comment this out if you DON'T want your perl installation to have
# the same location. Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
-INST_ARCH = \$(ARCHNAME)
+#INST_ARCH = \$(ARCHNAME)
#
# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
+# emulation and for thread support.
#
-#USE_MULTI = define
+USE_MULTI = define
#
-# Beginnings of interpreter cloning/threads; still very incomplete.
+# Beginnings of interpreter cloning/threads; now reasonably complete.
# This should be enabled to get the fork() emulation. This needs
# USE_MULTI as well.
#
-#USE_ITHREADS = define
+USE_ITHREADS = define
#
# uncomment to enable the implicit "host" layer for all system calls
# made by perl. This needs USE_MULTI above. This is also needed to
# get fork().
#
-#USE_IMP_SYS = define
+USE_IMP_SYS = define
+
+#
+# Comment out next assign to disable perl's I/O subsystem and use compiler's
+# stdio for IO - depending on your compiler vendor and run time library you may
+# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
+# You will also be unable to take full advantage of perl5.8's support for multiple
+# encodings and may see lower IO performance. You have been warned.
+USE_PERLIO = define
#
# WARNING! This option is deprecated and will eventually go away (enable
# USE_ITHREADS, and is only here for people who may have come to rely
# on the experimental Thread support that was in 5.005.
#
-#USE_5005THREADS= define
-
-#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_MULTI instead).
-#
-# uncomment next line if you want to use the PERL_OBJECT build option.
-# DO NOT ENABLE unless you have legacy code that relies on the C++
-# CPerlObj class that was available in 5.005. This cannot be enabled
-# if you ask for USE_5005THREADS above.
-#
-#USE_OBJECT = define
+#USE_5005THREADS = define
#
# uncomment one of the following lines if you are using either
#
# uncomment next line if you want debug version of perl (big,slow)
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
#
#CFG = Debug
# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
# It has patches that fix known bugs in older versions of MSVCRT.DLL.
# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
+# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
# and follow the directions in the package to install.
#
# Not recommended if you have VC 6.x and you're not running Windows 9x.
CRYPT_FLAG = -DHAVE_DES_FCRYPT
!ENDIF
-!IF "$(USE_OBJECT)" == "define"
-PERL_MALLOC = undef
-USE_5005THREADS = undef
-USE_MULTI = undef
-USE_IMP_SYS = define
-!ENDIF
-
!IF "$(PERL_MALLOC)" == ""
PERL_MALLOC = undef
!ENDIF
USE_MULTI = undef
!ENDIF
-!IF "$(USE_OBJECT)" == ""
-USE_OBJECT = undef
-!ENDIF
-
!IF "$(USE_ITHREADS)" == ""
USE_ITHREADS = undef
!ENDIF
USE_IMP_SYS = undef
!ENDIF
+!IF "$(USE_PERLIO)" == ""
+USE_PERLIO = undef
+!ENDIF
+
!IF "$(USE_PERLCRT)" == ""
USE_PERLCRT = undef
!ENDIF
-!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
+!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
USE_MULTI = define
!ENDIF
-!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
+!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
USE_MULTI = define
USE_5005THREADS = undef
!ENDIF
-!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
+!IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
!ENDIF
PROCESSOR_ARCHITECTURE = x86
!ENDIF
-!IF "$(USE_OBJECT)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
+!IF "$(WIN64)" == ""
+!IF "$(PROCESSOR_ARCHITEW6432)" != ""
+PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
+WIN64 = define
+!ELSE
+!IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
+WIN64 = define
!ELSE
+WIN64 = undef
+!ENDIF
+!ENDIF
+!ENDIF
+
!IF "$(USE_5005THREADS)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
!ELSE
!IF "$(USE_MULTI)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
!ELSE
+!IF "$(USE_PERLIO)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
+!ELSE
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
!ENDIF
!ENDIF
!ENDIF
+!IF "$(USE_PERLIO)" == "define"
+BUILDOPT = $(BUILDOPT) -DUSE_PERLIO
+!ENDIF
+
!IF "$(USE_ITHREADS)" == "define"
ARCHNAME = $(ARCHNAME)-thread
!ENDIF
# VC 6.0 can load the socket dll on demand. Makes the test suite
# run in about 10% less time.
-DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-!IF "$(CFG)" == ""
-CFG = Optimize
-!ENDIF
+DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
!ENDIF
ARCHDIR = ..\lib\$(ARCHNAME)
INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
INST_COREDIR = $(INST_ARCHLIB)\CORE
INST_POD = $(INST_LIB)\pod
-INST_HTML = $(INST_POD)\html
+INST_HTML = $(INST_TOP)$(INST_VER)\html
#
# Programs to compile, build .lib files and link
#
INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
! ELSE
OPTIMIZE = -Od -MD -Zi -DDEBUGGING
! ENDIF
-LINK_DBG = -debug -pdb:none
+LINK_DBG = -debug
!ELSE
-! IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
+OPTIMIZE = -MD -DNDEBUG
+LINK_DBG = -release
+! IF "$(WIN64)" == "define"
+# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
+OPTIMIZE = $(OPTIMIZE) -Ox -GL
+LINK_DBG = $(LINK_DBG) -ltcg
! ELSE
-OPTIMIZE = -Od -MD -DNDEBUG
+# -O1 yields smaller code, which turns out to be faster than -O2 on x86
+OPTIMIZE = $(OPTIMIZE) -O1
+#OPTIMIZE = $(OPTIMIZE) -O2
! ENDIF
-LINK_DBG = -release
!ENDIF
-!IF "$(USE_OBJECT)" == "define"
-OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG)
-BUILDOPT = $(BUILDOPT) -DPERL_OBJECT
+!IF "$(WIN64)" == "define"
+DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
+OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
!ENDIF
!IF "$(USE_PERLCRT)" != "define"
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
+ version.lib
+
+# win64 doesn't have some libs
+!IF "$(WIN64)" != "define"
+LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
+!ENDIF
# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
#
# Rules
-#
+#
.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
$(o).dll:
$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+ -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
.rc.res:
$(RSC) -i.. $<
#
# various targets
-PERLIMPLIB = ..\perl56.lib
-PERLDLL = ..\perl56.dll
+
+# makedef.pl must be updated if this changes, and this should normally
+# only change when there is an incompatible revision of the public API.
+PERLIMPLIB = ..\perl58.lib
+PERLDLL = ..\perl58.dll
MINIPERL = ..\miniperl.exe
MINIDIR = .\mini
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
+# Nominate a target which causes extensions to be re-built
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend
+# on and really only the interface - i.e. the .def file used to export symbols
+# from the .dll
+PERLDEP = perldll.def
+
PL2BAT = bin\pl2bat.pl
GLOBBAT = bin\perlglob.bat
..\utils\perlbug \
..\utils\pl2pm \
..\utils\c2ph \
+ ..\utils\pstruct \
..\utils\h2xs \
..\utils\perldoc \
..\utils\perlcc \
+ ..\utils\perlivp \
+ ..\utils\libnetcfg \
+ ..\utils\enc2xs \
+ ..\utils\piconv \
..\pod\checkpods \
..\pod\pod2html \
..\pod\pod2latex \
..\pod\podchecker \
..\pod\podselect \
..\x2p\find2perl \
+ ..\x2p\psed \
..\x2p\s2p \
+ ..\lib\ExtUtils\xsubpp \
bin\exetype.pl \
bin\runperl.pl \
bin\pl2bat.pl \
bin\search.pl
MAKE = nmake -nologo
+MAKE_BARE = nmake
+!IF "$(WIN64)" == "define"
+CFGSH_TMPL = config.vc64
+CFGH_TMPL = config_H.vc64
+!ELSE
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
+!ENDIF
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
NOOP = @echo
NULL =
+DEL = del
+
#
# filenames given to xsubpp must have forward slashes (since it puts
# full pathnames in #line strings)
..\globals.c \
..\gv.c \
..\hv.c \
+ ..\locale.c \
..\mg.c \
+ ..\numeric.c \
..\op.c \
..\perl.c \
..\perlapi.c \
..\pp.c \
..\pp_ctl.c \
..\pp_hot.c \
+ ..\pp_pack.c \
+ ..\pp_sort.c \
..\pp_sys.c \
+ ..\reentr.c \
..\regcomp.c \
..\regexec.c \
..\run.c \
EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
!ENDIF
-!IF "$(USE_OBJECT)" != "define"
EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
-!ENDIF
WIN32_SRC = \
.\win32.c \
.\win32sck.c \
- .\win32thread.c
+ .\win32thread.c
+
+# We need this for miniperl build unless we override canned
+# config.h #define building mini\*
+#!IF "$(USE_PERLIO)" == "define"
+WIN32_SRC = $(WIN32_SRC) .\win32io.c
+#!ENDIF
!IF "$(CRYPT_SRC)" != ""
WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
SETARGV_OBJ = setargv$(o)
!ENDIF
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
- Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
- Sys/Hostname
-STATIC_EXT = DynaLoader
-NONXS_EXT = Errno
-
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-SOCKET = $(EXTDIR)\Socket\Socket
-FCNTL = $(EXTDIR)\Fcntl\Fcntl
-OPCODE = $(EXTDIR)\Opcode\Opcode
-SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
-IO = $(EXTDIR)\IO\IO
-POSIX = $(EXTDIR)\POSIX\POSIX
-ATTRS = $(EXTDIR)\attrs\attrs
-THREAD = $(EXTDIR)\Thread\Thread
-B = $(EXTDIR)\B\B
-RE = $(EXTDIR)\re\re
-DUMPER = $(EXTDIR)\Data\Dumper\Dumper
-ERRNO = $(EXTDIR)\Errno\Errno
-PEEK = $(EXTDIR)\Devel\Peek\Peek
-BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
-DPROF = $(EXTDIR)\Devel\DProf\DProf
-GLOB = $(EXTDIR)\File\Glob\Glob
-HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
-
-SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
-FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
-OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
-SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
-IO_DLL = $(AUTODIR)\IO\IO.dll
-POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
-ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
-THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
-B_DLL = $(AUTODIR)\B\B.dll
-DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
-PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
-RE_DLL = $(AUTODIR)\re\re.dll
-BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
-DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
-GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
-HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
-
-ERRNO_PM = $(LIBDIR)\Errno.pm
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
+SOCKET = $(EXTDIR)\Socket\Socket
+FCNTL = $(EXTDIR)\Fcntl\Fcntl
+OPCODE = $(EXTDIR)\Opcode\Opcode
+SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
+IO = $(EXTDIR)\IO\IO
+POSIX = $(EXTDIR)\POSIX\POSIX
+ATTRS = $(EXTDIR)\attrs\attrs
+THREAD = $(EXTDIR)\Thread\Thread
+B = $(EXTDIR)\B\B
+RE = $(EXTDIR)\re\re
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper
+ERRNO = $(EXTDIR)\Errno\Errno
+PEEK = $(EXTDIR)\Devel\Peek\Peek
+BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
+DPROF = $(EXTDIR)\Devel\DProf\DProf
+GLOB = $(EXTDIR)\File\Glob\Glob
+HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
+STORABLE = $(EXTDIR)\Storable\Storable
+FILTER = $(EXTDIR)\Filter\Util\Call\Call
+ENCODE = $(EXTDIR)\Encode\Encode
+MD5 = $(EXTDIR)\Digest\MD5\MD5
+PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
+MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
+TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
+CWD = $(EXTDIR)\Cwd\Cwd
+LISTUTIL = $(EXTDIR)\List\Util\Util
+PERLIOVIA = $(EXTDIR)\PerlIO\via\via
+XSAPITEST = $(EXTDIR)\XS\APItest\APItest
+XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
+UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
+
+SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
+FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
+OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
+SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
+IO_DLL = $(AUTODIR)\IO\IO.dll
+POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
+ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
+THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
+B_DLL = $(AUTODIR)\B\B.dll
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
+PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
+RE_DLL = $(AUTODIR)\re\re.dll
+BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
+DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
+GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
+HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
+STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
+FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
+ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
+MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
+PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
+MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
+TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
+CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
+LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
+PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
+XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
+XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
+UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
EXTENSION_C = \
$(SOCKET).c \
$(BYTELOADER).c \
$(DPROF).c \
$(GLOB).c \
- $(HOSTNAME).c
+ $(HOSTNAME).c \
+ $(STORABLE).c \
+ $(FILTER).c \
+ $(ENCODE).c \
+ $(MD5).c \
+ $(PERLIOSCALAR).c \
+ $(MIMEBASE64).c \
+ $(TIMEHIRES).c \
+ $(CWD).c \
+ $(LISTUTIL).c \
+ $(PERLIOVIA).c \
+ $(XSAPITEST).c \
+ $(XSTYPEMAP).c \
+ $(UNICODENORMALIZE).c
EXTENSION_DLL = \
$(SOCKET_DLL) \
$(BYTELOADER_DLL) \
$(DPROF_DLL) \
$(GLOB_DLL) \
- $(HOSTNAME_DLL)
-
-EXTENSION_PM = \
- $(ERRNO_PM)
+ $(HOSTNAME_DLL) \
+ $(STORABLE_DLL) \
+ $(FILTER_DLL) \
+ $(ENCODE_DLL) \
+ $(MD5_DLL) \
+ $(PERLIOSCALAR_DLL) \
+ $(MIMEBASE64_DLL) \
+ $(TIMEHIRES_DLL) \
+ $(CWD_DLL) \
+ $(LISTUTIL_DLL) \
+ $(PERLIOVIA_DLL) \
+ $(XSAPITEST_DLL) \
+ $(XSTYPEMAP_DLL) \
+ $(UNICODENORMALIZE_DLL)
POD2HTML = $(PODDIR)\pod2html
POD2MAN = $(PODDIR)\pod2man
"INST_ARCH=$(INST_ARCH)" \
"archname=$(ARCHNAME)" \
"cc=$(CC)" \
- "ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
- "cf_email=$(EMAIL)" \
+ "ld=$(LINK32)" \
+ "ccflags=-nologo -Gf -W3 $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
+ "cf_email=$(EMAIL)" \
"d_crypt=$(D_CRYPT)" \
"d_mymalloc=$(PERL_MALLOC)" \
"libs=$(LIBFILES)" \
"libperl=$(PERLIMPLIB:..\=)" \
"libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
"libc=$(LIBC)" \
- "make=nmake" \
- "static_ext=$(STATIC_EXT)" \
- "dynamic_ext=$(DYNAMIC_EXT)" \
- "nonxs_ext=$(NONXS_EXT)" \
+ "make=$(MAKE_BARE)" \
"use5005threads=$(USE_5005THREADS)" \
"useithreads=$(USE_ITHREADS)" \
"usethreads=$(USE_5005THREADS)" \
"usemultiplicity=$(USE_MULTI)" \
+ "useperlio=$(USE_PERLIO)" \
"LINK_FLAGS=$(LINK_FLAGS:"=\")" \
"optimize=$(OPTIMIZE:"=\")"
#
all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
- $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
+ $(X2P) Extensions
+ @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite.
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
$(GLOBEXE) : perlglob$(o)
$(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
- perlglob$(o) setargv$(o)
+ perlglob$(o) setargv$(o)
perlglob$(o) : perlglob.c
# this target is for when changes to the main config.sh happen
# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
+# compiler (e.g. `nmake CCTYPE=BORLAND regen_config_h`)
regen_config_h:
perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
cd ..
- -del /f perl.exe
+ -del /f perl.exe perl*.dll
perl configpm
cd win32
-del /f $(CFGH_TMPL)
-mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ -perl config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
- cd .. && miniperl configpm
+ cd ..
+ miniperl configpm
+ cd win32
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(XCOPY) *.h $(COREDIR)\*.*
$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
- || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
+ -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
$(LINK32) -subsystem:console -out:$@ @<<
# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
-!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
+!IF "$(USE_IMP_SYS)" == "define"
perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
$(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
!ENDIF
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
- cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+ cd ..
+ miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+ cd win32
..\x2p\a2p$(o) : ..\x2p\a2p.c
$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
$(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
<<
-perlmain.c : runperl.c
+perlmain.c : runperl.c
copy runperl.c perlmain.c
perlmain$(o) : perlmain.c
$(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
copy $(PERLEXE) $(WPERLEXE)
$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
- copy splittree.pl ..
+ copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
- cd $(EXTDIR)\Data\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
- cd $(EXTDIR)\Devel\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
- cd $(EXTDIR)\File\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
- cd $(EXTDIR)\Devel\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(RE_DLL): $(PERLEXE) $(RE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(B_DLL): $(PERLEXE) $(B).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(IO_DLL): $(PERLEXE) $(IO).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
-
-$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
+#----------------------------------------------------------------------------------
+Extensions: buildext.pl $(PERLDEP) $(CONFIGPM)
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
-$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
- cd $(EXTDIR)\Sys\$(*B)
- ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\..\win32
-
-$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
+Extensions_clean:
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
- cd $(EXTDIR)\$(*B)
- ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
- $(MAKE)
- cd ..\..\win32
+#----------------------------------------------------------------------------------
doc: $(PERLEXE)
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
cd ..\utils
$(MAKE) PERL=$(MINIPERL)
cd ..\pod
- copy ..\README.amiga .\perlamiga.pod
- copy ..\README.cygwin .\perlcygwin.pod
- copy ..\README.dos .\perldos.pod
- copy ..\README.hpux .\perlhpux.pod
- copy ..\README.machten .\perlmachten.pod
- copy ..\README.os2 .\perlos2.pod
+ copy ..\README.aix .\perlaix.pod
+ copy ..\README.amiga .\perlamiga.pod
+ copy ..\README.apollo .\perlapollo.pod
+ copy ..\README.beos .\perlbeos.pod
+ copy ..\README.bs2000 .\perlbs2000.pod
+ copy ..\README.ce .\perlce.pod
+ copy ..\README.cygwin .\perlcygwin.pod
+ copy ..\README.dgux .\perldgux.pod
+ copy ..\README.dos .\perldos.pod
+ copy ..\README.epoc .\perlepoc.pod
+ copy ..\README.freebsd .\perlfreebsd.pod
+ copy ..\README.hurd .\perlhurd.pod
+ copy ..\README.hpux .\perlhpux.pod
+ copy ..\README.irix .\perlirix.pod
+ copy ..\README.machten .\perlmachten.pod
+ copy ..\README.macos .\perlmacos.pod
+ copy ..\README.mint .\perlmint.pod
+ copy ..\README.mpeix .\perlmpeix.pod
+ copy ..\README.netware .\perlnetware.pod
+ copy ..\README.os2 .\perlos2.pod
+ copy ..\README.os390 .\perlos390.pod
+ copy ..\README.plan9 .\perlplan9.pod
+ copy ..\README.qnx .\perlqnx.pod
+ copy ..\README.solaris .\perlsolaris.pod
+ copy ..\README.tru64 .\perltru64.pod
+ copy ..\README.uts .\perluts.pod
+ copy ..\README.vmesa .\perlvmesa.pod
copy ..\vms\perlvms.pod .\perlvms.pod
- copy ..\README.win32 .\perlwin32.pod
+ copy ..\README.vos .\perlvos.pod
+ copy ..\README.win32 .\perlwin32.pod
$(MAKE) -f ..\win32\pod.mak converters
+ cd ..\lib
+ $(PERLEXE) lib_pm.PL
cd ..\win32
$(PERLEXE) $(PL2BAT) $(UTILS)
-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
-del /f *.def *.map
- -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
+ -del /f $(EXTENSION_DLL)
-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-del /f $(LIBDIR)\XSLoader.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-del /f $(LIBDIR)\File\Glob.pm
- -rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
- -rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
- -rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
- -rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
- -del /f $(PODDIR)\*.html
- -del /f $(PODDIR)\*.bat
+ -del /f $(LIBDIR)\Storable.pm
+ -del /f $(LIBDIR)\Filter\Util\Call.pm
+ -del /f $(LIBDIR)\Digest\MD5.pm
+ -del /f $(LIBDIR)\PerlIO\scalar.pm
+ -del /f $(LIBDIR)\PerlIO\via.pm
+ -del /f $(LIBDIR)\MIME\Base64.pm
+ -del /f $(LIBDIR)\MIME\QuotedPrint.pm
+ -del /f $(LIBDIR)\List\Util.pm
+ -del /f $(LIBDIR)\Scalar\Util.pm
+ -del /f $(LIBDIR)\Time\HiRes.pm
+ -del /f $(LIBDIR)\XS\APItest.pm
+ -del /f $(LIBDIR)\XS\Typemap.pm
+ -del /f $(LIBDIR)\Unicode\Normalize.pm
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
+ -rmdir /s $(LIBDIR)\IO
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
+ -rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
+ -rmdir /s $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
+ -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
+ -rmdir /s $(LIBDIR)\Digest
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+ -rmdir /s $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
+ -rmdir /s $(LIBDIR)\List
+ -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
+ -rmdir /s $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
+ -rmdir /s $(LIBDIR)\XS
+ cd $(PODDIR)
+ -del /f *.html *.bat checkpods \
+ perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
+ perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
+ perldos.pod perlepoc.pod perlfreebsd.pod perlhurd.pod \
+ perlhpux.pod perlirix.pod perlmachten.pod \
+ perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
+ perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \
+ perlsolaris.pod perltru64.pod perluts.pod \
+ perlvmesa.pod perlvms.pod perlvos.pod \
+ perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
+ podchecker podselect
cd ..\utils
- -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp
+ -del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs perldoc perlivp \
+ dprofpp perlcc libnetcfg enc2xs piconv
-del /f *.bat
cd ..\win32
cd ..\x2p
- -del /f find2perl s2p
+ -del /f find2perl s2p psed
-del /f *.bat
cd ..\win32
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
+ cd ..
+ -del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ cd win32
cd $(EXTDIR)
- -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
+ -del /s *.def Makefile Makefile.old
cd ..\win32
- -rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
- -rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
+ -rmdir /s $(AUTODIR)
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR)
+ -rmdir /s $(COREDIR)
install : all installbare installhtml
$(RCOPY) html\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM)
- copy splittree.pl ..
+ copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
$(PERLEXE) -I..\lib harness
cd ..\win32
-clean :
- -@erase miniperlmain$(o)
- -@erase $(MINIPERL)
- -@erase perlglob$(o)
- -@erase perlmain$(o)
- -@erase config.w32
- -@erase /f config.h
- -@erase $(GLOBEXE)
- -@erase $(PERLEXE)
- -@erase $(WPERLEXE)
- -@erase $(PERLDLL)
- -@erase $(CORE_OBJ)
- -rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
- -@erase $(WIN32_OBJ)
- -@erase $(DLL_OBJ)
- -@erase $(X2P_OBJ)
- -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
- -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
- -@erase ..\x2p\*.exe ..\x2p\*.bat
- -@erase *.ilk
- -@erase *.pdb
+_test :
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+ cd ..\t
+ $(PERLEXE) -I..\lib harness
+ cd ..\win32
+
+clean : Extensions_clean
+ -@$(DEL) miniperlmain$(o)
+ -@$(DEL) $(MINIPERL)
+ -@$(DEL) perlglob$(o)
+ -@$(DEL) perlmain$(o)
+ -@$(DEL) config.w32
+ -@$(DEL) config.h
+ -@$(DEL) $(GLOBEXE)
+ -@$(DEL) $(PERLEXE)
+ -@$(DEL) $(WPERLEXE)
+ -@$(DEL) $(PERLDLL)
+ -@$(DEL) $(CORE_OBJ)
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
+ -rmdir /s $(MINIDIR)
+ -@$(DEL) $(WIN32_OBJ)
+ -@$(DEL) $(DLL_OBJ)
+ -@$(DEL) $(X2P_OBJ)
+ -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
+ -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat
+ -@$(DEL) ..\x2p\*.exe ..\x2p\*.bat
+ -@$(DEL) *.ilk
+ -@$(DEL) *.pdb
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "nmake nok" instead.
+ok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+
+nok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+
+nokfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok