#
# Makefile to build perl on Windows NT using Microsoft NMAKE.
# Supported compilers:
-# Visual C++ 5.x (possibly other versions)
+# Visual C++ 2.0 through 6.0 (and possibly newer versions)
+# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl57.dll). Also makes individual DLLs for the XS extensions.
+# (perl58.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER = \5.7.3
+#INST_VER = \5.8.0
#
# Comment this out if you DON'T want your perl installation to have
#
# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
+# emulation and for thread support.
#
USE_MULTI = define
#
-# Beginnings of interpreter cloning/threads; still very incomplete.
+# Beginnings of interpreter cloning/threads; now reasonably complete.
# This should be enabled to get the fork() emulation. This needs
# USE_MULTI as well.
#
USE_IMP_SYS = define
#
-# uncomment to enable the experimental PerlIO I/O subsystem.
+# Comment out next assign to disable perl's I/O subsystem and use compiler's
+# stdio for IO - depending on your compiler vendor and run time library you may
+# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
+# You will also be unable to take full advantage of perl5.8's support for multiple
+# encodings and may see lower IO performance. You have been warned.
USE_PERLIO = define
#
#
# uncomment next line if you want debug version of perl (big,slow)
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
#
#CFG = Debug
PROCESSOR_ARCHITECTURE = x86
!ENDIF
+!IF "$(WIN64)" == ""
+!IF "$(PROCESSOR_ARCHITEW6432)" != ""
+PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432)
+WIN64 = define
+!ELSE
+!IF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
+WIN64 = define
+!ELSE
+WIN64 = undef
+!ENDIF
+!ENDIF
+!ENDIF
+
!IF "$(USE_5005THREADS)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
!ELSE
! ELSE
OPTIMIZE = -Od -MD -Zi -DDEBUGGING
! ENDIF
-LINK_DBG = -debug -pdb:none
+LINK_DBG = -debug
!ELSE
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
+OPTIMIZE = -MD -DNDEBUG
LINK_DBG = -release
+! IF "$(WIN64)" == "define"
+# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
+OPTIMIZE = $(OPTIMIZE) -Ox -GL
+LINK_DBG = $(LINK_DBG) -ltcg
+! ELSE
+# -O1 yields smaller code, which turns out to be faster than -O2 on x86
+OPTIMIZE = $(OPTIMIZE) -O1
+#OPTIMIZE = $(OPTIMIZE) -O2
+! ENDIF
+!ENDIF
+
+!IF "$(WIN64)" == "define"
+DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE
+OPTIMIZE = $(OPTIMIZE) -Wp64 -Op
!ENDIF
!IF "$(USE_PERLCRT)" != "define"
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
+ version.lib
+
+# win64 doesn't have some libs
+!IF "$(WIN64)" != "define"
+LIBBASEFILES = $(LIBBASEFILES) odbc32.lib odbccp32.lib
+!ENDIF
# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-# XXX so why did we change it from perl56 to perl57?
-PERLIMPLIB = ..\perl57.lib
-PERLDLL = ..\perl57.dll
+PERLIMPLIB = ..\perl58.lib
+PERLDLL = ..\perl58.dll
MINIPERL = ..\miniperl.exe
MINIDIR = .\mini
..\utils\perlbug \
..\utils\pl2pm \
..\utils\c2ph \
+ ..\utils\pstruct \
..\utils\h2xs \
..\utils\perldoc \
..\utils\perlcc \
..\utils\perlivp \
..\utils\libnetcfg \
+ ..\utils\enc2xs \
+ ..\utils\piconv \
..\pod\checkpods \
..\pod\pod2html \
..\pod\pod2latex \
..\pod\podchecker \
..\pod\podselect \
..\x2p\find2perl \
+ ..\x2p\psed \
..\x2p\s2p \
..\lib\ExtUtils\xsubpp \
bin\exetype.pl \
MAKE = nmake -nologo
MAKE_BARE = nmake
+!IF "$(WIN64)" == "define"
+CFGSH_TMPL = config.vc64
+CFGH_TMPL = config_H.vc64
+!ELSE
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
+!ENDIF
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
.\win32sck.c \
.\win32thread.c
-!IF "$(USE_PERLIO)" == "define"
+# We need this for miniperl build unless we override canned
+# config.h #define building mini\*
+#!IF "$(USE_PERLIO)" == "define"
WIN32_SRC = $(WIN32_SRC) .\win32io.c
-!ENDIF
+#!ENDIF
!IF "$(CRYPT_SRC)" != ""
WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
FILTER = $(EXTDIR)\Filter\Util\Call\Call
ENCODE = $(EXTDIR)\Encode\Encode
MD5 = $(EXTDIR)\Digest\MD5\MD5
-PERLIOSCALAR = $(EXTDIR)\PerlIO\Scalar\Scalar
+PERLIOSCALAR = $(EXTDIR)\PerlIO\scalar\scalar
MIMEBASE64 = $(EXTDIR)\MIME\Base64\Base64
TIMEHIRES = $(EXTDIR)\Time\HiRes\HiRes
CWD = $(EXTDIR)\Cwd\Cwd
LISTUTIL = $(EXTDIR)\List\Util\Util
-PERLIOVIA = $(EXTDIR)\PerlIO\Via\Via
+PERLIOVIA = $(EXTDIR)\PerlIO\via\via
+XSAPITEST = $(EXTDIR)\XS\APItest\APItest
XSTYPEMAP = $(EXTDIR)\XS\Typemap\Typemap
UNICODENORMALIZE = $(EXTDIR)\Unicode\Normalize\Normalize
FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
MD5_DLL = $(AUTODIR)\Digest\MD5\MD5.dll
-PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\Scalar\Scalar.dll
+PERLIOSCALAR_DLL = $(AUTODIR)\PerlIO\scalar\scalar.dll
MIMEBASE64_DLL = $(AUTODIR)\MIME\Base64\Base64.dll
TIMEHIRES_DLL = $(AUTODIR)\Time\HiRes\HiRes.dll
CWD_DLL = $(AUTODIR)\Cwd\Cwd.dll
LISTUTIL_DLL = $(AUTODIR)\List\Util\Util.dll
-PERLIOVIA_DLL = $(AUTODIR)\PerlIO\Via\Via.dll
+PERLIOVIA_DLL = $(AUTODIR)\PerlIO\via\via.dll
+XSAPITEST_DLL = $(AUTODIR)\XS\APItest\APItest.dll
XSTYPEMAP_DLL = $(AUTODIR)\XS\Typemap\Typemap.dll
UNICODENORMALIZE_DLL = $(AUTODIR)\Unicode\Normalize\Normalize.dll
$(CWD).c \
$(LISTUTIL).c \
$(PERLIOVIA).c \
+ $(XSAPITEST).c \
$(XSTYPEMAP).c \
$(UNICODENORMALIZE).c
$(CWD_DLL) \
$(LISTUTIL_DLL) \
$(PERLIOVIA_DLL) \
+ $(XSAPITEST_DLL) \
$(XSTYPEMAP_DLL) \
$(UNICODENORMALIZE_DLL)
regen_config_h:
perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
cd ..
- -del /f perl.exe
+ -del /f perl.exe perl*.dll
perl configpm
cd win32
-del /f $(CFGH_TMPL)
-mkdir $(COREDIR)
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ -perl config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
copy ..\README.dgux .\perldgux.pod
copy ..\README.dos .\perldos.pod
copy ..\README.epoc .\perlepoc.pod
+ copy ..\README.freebsd .\perlfreebsd.pod
copy ..\README.hurd .\perlhurd.pod
copy ..\README.hpux .\perlhpux.pod
+ copy ..\README.irix .\perlirix.pod
copy ..\README.machten .\perlmachten.pod
copy ..\README.macos .\perlmacos.pod
copy ..\README.mint .\perlmint.pod
-del /f $(LIBDIR)\Storable.pm
-del /f $(LIBDIR)\Filter\Util\Call.pm
-del /f $(LIBDIR)\Digest\MD5.pm
- -del /f $(LIBDIR)\PerlIO\Scalar.pm
- -del /f $(LIBDIR)\PerlIO\Via.pm
+ -del /f $(LIBDIR)\PerlIO\scalar.pm
+ -del /f $(LIBDIR)\PerlIO\via.pm
-del /f $(LIBDIR)\MIME\Base64.pm
-del /f $(LIBDIR)\MIME\QuotedPrint.pm
-del /f $(LIBDIR)\List\Util.pm
-del /f $(LIBDIR)\Scalar\Util.pm
-del /f $(LIBDIR)\Time\HiRes.pm
+ -del /f $(LIBDIR)\XS\APItest.pm
-del /f $(LIBDIR)\XS\Typemap.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
-if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
-rmdir /s $(LIBDIR)\IO
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
- -rmdir /s $(LIBDIR)\Thread
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
-rmdir /s $(LIBDIR)\B
-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
-del /f *.html *.bat checkpods \
perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
- perldos.pod perlepoc.pod perlhurd.pod \
- perlhpux.pod perlmachten.pod \
+ perldos.pod perlepoc.pod perlfreebsd.pod perlhurd.pod \
+ perlhpux.pod perlirix.pod perlmachten.pod \
perlmacos.pod perlmint.pod perlmpeix.pod perlnetware.pod \
perlos2.pod perlos390.pod perlplan9.pod perlqnx.pod \
perlsolaris.pod perltru64.pod perluts.pod \
perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
cd ..\utils
- -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc perlivp dprofpp
+ -del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs perldoc perlivp \
+ dprofpp perlcc libnetcfg enc2xs piconv
-del /f *.bat
cd ..\win32
cd ..\x2p
- -del /f find2perl s2p
+ -del /f find2perl s2p psed
-del /f *.bat
cd ..\win32
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
+ cd ..
+ -del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ cd win32
cd $(EXTDIR)
- -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
+ -del /s *.def Makefile Makefile.old
cd ..\win32
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
-rmdir /s $(AUTODIR)