-case "$CONFIG_SH" in
-'') CONFIG_SH=config.sh ;;
-esac
-case "$CONFIG_H" in
-'') CONFIG_H=config.h ;;
-esac
-case $CONFIG in
-'')
- if test -f $CONFIG_SH; then TOP=.;
- elif test -f ../$CONFIG_SH; then TOP=..;
- elif test -f ../../$CONFIG_SH; then TOP=../..;
- elif test -f ../../../$CONFIG_SH; then TOP=../../..;
- elif test -f ../../../../$CONFIG_SH; then TOP=../../../..;
- else
- echo "Can't find $CONFIG_SH."; exit 1
- fi
- . $TOP/$CONFIG_SH
- ;;
-esac
-case "$0" in
-*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
-esac
-echo "Extracting $CONFIG_H (with variable substitutions)"
-sed <<!GROK!THIS! >$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!'
/*
* This file was produced by running the config_h.SH script, which
- * gets its values from $CONFIG_SH, which is generally produced by
+ * gets its values from config.sh, which is generally produced by
* running Configure.
*
* Feel free to modify any of this as the need arises. Note, however,
* that running config_h.SH again will wipe out any changes you've made.
- * For a more permanent change edit $CONFIG_SH and rerun config_h.SH.
+ * For a more permanent change edit config.sh and rerun config_h.SH.
*
* \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $
*/
/*
- * Package name : $package
- * Source directory : $src
- * Configuration time: $cf_time
- * Configured by : $cf_by
- * Target system : $myuname
+ * Package name : perl5
+ * Source directory : /vos_ftp_site/pub/vos/posix/(alpha|ga)/perl
+ * Configuration time: 2000-10-24 15:35 UCT
+ * Configured by : Paul_Green@stratus.com
+ * Target system : VOS
*/
#ifndef _config_h_
/* LOC_SED:
* This symbol holds the complete pathname to the sed program.
*/
-#define LOC_SED "$full_sed" /**/
+#define LOC_SED "/system/ported/command_library/sed.pm" /**/
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
* available.
*/
-#$d_alarm HAS_ALARM /**/
+#define HAS_ALARM /**/
/* HASATTRIBUTE:
* This symbol indicates the C compiler can check for function attributes,
* such as printf formats. This is normally only supported by GNU cc.
*/
-#$d_attribut HASATTRIBUTE /**/
+/*#define HASATTRIBUTE /**/
#ifndef HASATTRIBUTE
#define __attribute__(_arg_)
#endif
* This symbol is defined if the bcmp() routine is available to
* compare blocks of memory.
*/
-#$d_bcmp HAS_BCMP /**/
+/*#define HAS_BCMP /**/
/* HAS_BCOPY:
* This symbol is defined if the bcopy() routine is available to
* copy blocks of memory.
*/
-#$d_bcopy HAS_BCOPY /**/
+/*#define HAS_BCOPY /**/
/* HAS_BZERO:
* This symbol is defined if the bzero() routine is available to
* set a memory block to 0.
*/
-#$d_bzero HAS_BZERO /**/
+/*#define HAS_BZERO /**/
/* HAS_CHOWN:
* This symbol, if defined, indicates that the chown routine is
* available.
*/
-#$d_chown HAS_CHOWN /**/
+#define HAS_CHOWN /**/
/* HAS_CHROOT:
* This symbol, if defined, indicates that the chroot routine is
* available.
*/
-#$d_chroot HAS_CHROOT /**/
+/*#define HAS_CHROOT /**/
/* HAS_CHSIZE:
* This symbol, if defined, indicates that the chsize routine is available
* to truncate files. You might need a -lx to get this routine.
*/
-#$d_chsize HAS_CHSIZE /**/
+/*#define HAS_CHSIZE /**/
/* HASCONST:
* This symbol, if defined, indicates that this C compiler knows about
* within your programs. The mere use of the "const" keyword will
* trigger the necessary tests.
*/
-#$d_const HASCONST /**/
+#define HASCONST /**/
#ifndef HASCONST
#define const
#endif
* This symbol, if defined, indicates that the crypt routine is available
* to encrypt passwords and the like.
*/
-#$d_crypt HAS_CRYPT /**/
+/*#define HAS_CRYPT /**/
/* HAS_CUSERID:
* This symbol, if defined, indicates that the cuserid routine is
* available to get character login names.
*/
-#$d_cuserid HAS_CUSERID /**/
+/*#define HAS_CUSERID /**/
/* HAS_DBL_DIG:
* This symbol, if defined, indicates that this system's <float.h>
* of significant digits in a double precision number. If this
* symbol is not defined, a guess of 15 is usually pretty good.
*/
-#$d_dbl_dig HAS_DBL_DIG /* */
+#define HAS_DBL_DIG /* */
/* HAS_DIFFTIME:
* This symbol, if defined, indicates that the difftime routine is
* available.
*/
-#$d_difftime HAS_DIFFTIME /**/
+#define HAS_DIFFTIME /**/
/* HAS_DLERROR:
* This symbol, if defined, indicates that the dlerror routine is
* available to return a string describing the last error that
* occurred from a call to dlopen(), dlclose() or dlsym().
*/
-#$d_dlerror HAS_DLERROR /**/
+/*#define HAS_DLERROR /**/
/* SETUID_SCRIPTS_ARE_SECURE_NOW:
* This symbol, if defined, indicates that the bug that prevents
* subprocesses to which it must pass the filename rather than the
* file descriptor of the script to be executed.
*/
-#$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/
-#$d_dosuid DOSUID /**/
+#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/
+/*#define DOSUID /**/
/* HAS_DUP2:
* This symbol, if defined, indicates that the dup2 routine is
* available to duplicate file descriptors.
*/
-#$d_dup2 HAS_DUP2 /**/
+#define HAS_DUP2 /**/
/* HAS_FCHMOD:
* This symbol, if defined, indicates that the fchmod routine is available
* to change mode of opened files. If unavailable, use chmod().
*/
-#$d_fchmod HAS_FCHMOD /**/
+#define HAS_FCHMOD /**/
/* HAS_FCHOWN:
* This symbol, if defined, indicates that the fchown routine is available
* to change ownership of opened files. If unavailable, use chown().
*/
-#$d_fchown HAS_FCHOWN /**/
+/*#define HAS_FCHOWN /**/
/* HAS_FCNTL:
* This symbol, if defined, indicates to the C program that
* the fcntl() function exists.
*/
-#$d_fcntl HAS_FCNTL /**/
+#define HAS_FCNTL /**/
+
+/* HAS__FWALK:
+ * This symbol, if defined, indicates that the _fwalk system call is
+ * available to apply a function to all the file handles.
+ */
+/*#define HAS__FWALK / **/
+
+/* FCNTL_CAN_LOCK:
+ * This symbol, if defined, indicates that fcntl() can be used
+ * for file locking. Normally on Unix systems this is defined.
+ * It may be undefined on VMS.
+ */
+#define FCNTL_CAN_LOCK /**/
/* HAS_FGETPOS:
* This symbol, if defined, indicates that the fgetpos routine is
* available to get the file position indicator, similar to ftell().
*/
-#$d_fgetpos HAS_FGETPOS /**/
+#define HAS_FGETPOS /**/
/* HAS_FLOCK:
* This symbol, if defined, indicates that the flock routine is
* available to do file locking.
*/
-#$d_flock HAS_FLOCK /**/
+/*#define HAS_FLOCK /**/
/* HAS_FORK:
* This symbol, if defined, indicates that the fork routine is
* available.
*/
-#$d_fork HAS_FORK /**/
+#define HAS_FORK /**/
/* HAS_FSETPOS:
* This symbol, if defined, indicates that the fsetpos routine is
* available to set the file position indicator, similar to fseek().
*/
-#$d_fsetpos HAS_FSETPOS /**/
+#define HAS_FSETPOS /**/
/* HAS_GETTIMEOFDAY:
* This symbol, if defined, indicates that the gettimeofday() system
* <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
* The type "Timeval" should be used to refer to "struct timeval".
*/
-#$d_gettimeod HAS_GETTIMEOFDAY /**/
+/*#define HAS_GETTIMEOFDAY /**/
#ifdef HAS_GETTIMEOFDAY
#define Timeval struct timeval /* Structure used by gettimeofday() */
#endif
* available to get the list of process groups. If unavailable, multiple
* groups are probably not supported.
*/
-#$d_getgrps HAS_GETGROUPS /**/
+/*#define HAS_GETGROUPS /**/
/* HAS_GETLOGIN:
* This symbol, if defined, indicates that the getlogin routine is
* available to get the login name.
*/
-#$d_getlogin HAS_GETLOGIN /**/
+#define HAS_GETLOGIN /**/
+
+/* HAS_GETPAGESIZE:
+ * This symbol, if defined, indicates that the getpagesize system call
+ * is available to get system page size, which is the granularity of
+ * many memory management calls.
+ */
+/*#define HAS_GETPAGESIZE /**/
/* HAS_GETPGID:
* This symbol, if defined, indicates to the C program that
* the getpgid(pid) function is available to get the
* process group id.
*/
-#$d_getpgid HAS_GETPGID /**/
+/*#define HAS_GETPGID /**/
/* HAS_GETPGRP2:
* This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
* routine is available to get the current process group.
*/
-#$d_getpgrp2 HAS_GETPGRP2 /**/
+/*#define HAS_GETPGRP2 /**/
/* HAS_GETPPID:
* This symbol, if defined, indicates that the getppid routine is
* available to get the parent process ID.
*/
-#$d_getppid HAS_GETPPID /**/
+#define HAS_GETPPID /**/
/* HAS_GETPRIORITY:
* This symbol, if defined, indicates that the getpriority routine is
* available to get a process's priority.
*/
-#$d_getprior HAS_GETPRIORITY /**/
+/*#define HAS_GETPRIORITY /**/
/* HAS_INET_ATON:
* This symbol, if defined, indicates to the C program that the
* inet_aton() function is available to parse IP address "dotted-quad"
* strings.
*/
-#$d_inetaton HAS_INET_ATON /**/
+/*#define HAS_INET_ATON /**/
/* HAS_KILLPG:
* This symbol, if defined, indicates that the killpg routine is available
* to kill process groups. If unavailable, you probably should use kill
* with a negative process number.
*/
-#$d_killpg HAS_KILLPG /**/
+/*#define HAS_KILLPG /**/
/* HAS_LINK:
* This symbol, if defined, indicates that the link routine is
* available to create hard links.
*/
-#$d_link HAS_LINK /**/
+/*#define HAS_LINK /**/
/* HAS_LOCALECONV:
* This symbol, if defined, indicates that the localeconv routine is
* available for numeric and monetary formatting conventions.
*/
-#$d_locconv HAS_LOCALECONV /**/
+#define HAS_LOCALECONV /**/
/* HAS_LOCKF:
* This symbol, if defined, indicates that the lockf routine is
* available to do file locking.
*/
-#$d_lockf HAS_LOCKF /**/
+#define HAS_LOCKF /**/
/* HAS_LSTAT:
* This symbol, if defined, indicates that the lstat routine is
* available to do file stats on symbolic links.
*/
-#$d_lstat HAS_LSTAT /**/
+#define HAS_LSTAT /**/
/* HAS_MBLEN:
* This symbol, if defined, indicates that the mblen routine is available
* to find the number of bytes in a multibye character.
*/
-#$d_mblen HAS_MBLEN /**/
+#define HAS_MBLEN /**/
/* HAS_MBSTOWCS:
* This symbol, if defined, indicates that the mbstowcs routine is
* available to covert a multibyte string into a wide character string.
*/
-#$d_mbstowcs HAS_MBSTOWCS /**/
+#define HAS_MBSTOWCS /**/
/* HAS_MBTOWC:
* This symbol, if defined, indicates that the mbtowc routine is available
* to covert a multibyte to a wide character.
*/
-#$d_mbtowc HAS_MBTOWC /**/
+#define HAS_MBTOWC /**/
/* HAS_MEMCMP:
* This symbol, if defined, indicates that the memcmp routine is available
* to compare blocks of memory.
*/
-#$d_memcmp HAS_MEMCMP /**/
+#define HAS_MEMCMP /**/
/* HAS_MEMCPY:
* This symbol, if defined, indicates that the memcpy routine is available
* to copy blocks of memory.
*/
-#$d_memcpy HAS_MEMCPY /**/
+#define HAS_MEMCPY /**/
/* HAS_MEMMOVE:
* This symbol, if defined, indicates that the memmove routine is available
* only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your
* own version.
*/
-#$d_memmove HAS_MEMMOVE /**/
+#define HAS_MEMMOVE /**/
/* HAS_MEMSET:
* This symbol, if defined, indicates that the memset routine is available
* to set blocks of memory.
*/
-#$d_memset HAS_MEMSET /**/
+#define HAS_MEMSET /**/
/* HAS_MKDIR:
* This symbol, if defined, indicates that the mkdir routine is available
* to create directories. Otherwise you should fork off a new process to
* exec /bin/mkdir.
*/
-#$d_mkdir HAS_MKDIR /**/
+#define HAS_MKDIR /**/
/* HAS_MKFIFO:
* This symbol, if defined, indicates that the mkfifo routine is
* do it for you. However, if mkfifo is there, mknod might require
* super-user privileges which mkfifo will not.
*/
-#$d_mkfifo HAS_MKFIFO /**/
+#define HAS_MKFIFO /**/
/* HAS_MKTIME:
* This symbol, if defined, indicates that the mktime routine is
* available.
*/
-#$d_mktime HAS_MKTIME /**/
+#define HAS_MKTIME /**/
/* HAS_MSYNC:
* This symbol, if defined, indicates that the msync system call is
* available to synchronize a mapped file.
*/
-#$d_msync HAS_MSYNC /**/
+/*#define HAS_MSYNC /**/
/* HAS_MUNMAP:
* This symbol, if defined, indicates that the munmap system call is
* available to unmap a region, usually mapped by mmap().
*/
-#$d_munmap HAS_MUNMAP /**/
+#define HAS_MUNMAP /**/
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
* available.
*/
-#$d_nice HAS_NICE /**/
+/*#define HAS_NICE /**/
/* HAS_PATHCONF:
* This symbol, if defined, indicates that pathconf() is available
* to determine file-system related limits and options associated
* with a given open file descriptor.
*/
-#$d_pathconf HAS_PATHCONF /**/
-#$d_fpathconf HAS_FPATHCONF /**/
+#define HAS_PATHCONF /**/
+#define HAS_FPATHCONF /**/
/* HAS_PAUSE:
* This symbol, if defined, indicates that the pause routine is
* available to suspend a process until a signal is received.
*/
-#$d_pause HAS_PAUSE /**/
+#define HAS_PAUSE /**/
/* HAS_PIPE:
* This symbol, if defined, indicates that the pipe routine is
* available to create an inter-process channel.
*/
-#$d_pipe HAS_PIPE /**/
+#define HAS_PIPE /**/
/* HAS_POLL:
* This symbol, if defined, indicates that the poll routine is
* available to poll active file descriptors. You may safely
* include <poll.h> when this symbol is defined.
*/
-#$d_poll HAS_POLL /**/
+#define HAS_POLL /**/
/* HAS_READDIR:
* This symbol, if defined, indicates that the readdir routine is
* available to read directory entries. You may have to include
* <dirent.h>. See I_DIRENT.
*/
-#$d_readdir HAS_READDIR /**/
+#define HAS_READDIR /**/
/* HAS_SEEKDIR:
* This symbol, if defined, indicates that the seekdir routine is
* available. You may have to include <dirent.h>. See I_DIRENT.
*/
-#$d_seekdir HAS_SEEKDIR /**/
+/*#define HAS_SEEKDIR /**/
/* HAS_TELLDIR:
* This symbol, if defined, indicates that the telldir routine is
* available. You may have to include <dirent.h>. See I_DIRENT.
*/
-#$d_telldir HAS_TELLDIR /**/
+/*#define HAS_TELLDIR /**/
/* HAS_REWINDDIR:
* This symbol, if defined, indicates that the rewinddir routine is
* available. You may have to include <dirent.h>. See I_DIRENT.
*/
-#$d_rewinddir HAS_REWINDDIR /**/
+#define HAS_REWINDDIR /**/
/* HAS_READLINK:
* This symbol, if defined, indicates that the readlink routine is
* available to read the value of a symbolic link.
*/
-#$d_readlink HAS_READLINK /**/
+#define HAS_READLINK /**/
/* HAS_RENAME:
* This symbol, if defined, indicates that the rename routine is available
* to rename files. Otherwise you should do the unlink(), link(), unlink()
* trick.
*/
-#$d_rename HAS_RENAME /**/
+#define HAS_RENAME /**/
/* HAS_RMDIR:
* This symbol, if defined, indicates that the rmdir routine is
* available to remove directories. Otherwise you should fork off a
* new process to exec /bin/rmdir.
*/
-#$d_rmdir HAS_RMDIR /**/
+#define HAS_RMDIR /**/
/* HAS_SELECT:
* This symbol, if defined, indicates that the select routine is
* available to select active file descriptors. If the timeout field
* is used, <sys/time.h> may need to be included.
*/
-#$d_select HAS_SELECT /**/
+#define HAS_SELECT /**/
/* HAS_SETEGID:
* This symbol, if defined, indicates that the setegid routine is available
* to change the effective gid of the current program.
*/
-#$d_setegid HAS_SETEGID /**/
+#define HAS_SETEGID /**/
/* HAS_SETEUID:
* This symbol, if defined, indicates that the seteuid routine is available
* to change the effective uid of the current program.
*/
-#$d_seteuid HAS_SETEUID /**/
+#define HAS_SETEUID /**/
/* HAS_SETLINEBUF:
* This symbol, if defined, indicates that the setlinebuf routine is
* available to change stderr or stdout from block-buffered or unbuffered
* to a line-buffered mode.
*/
-#$d_setlinebuf HAS_SETLINEBUF /**/
+#define HAS_SETLINEBUF /**/
/* HAS_SETLOCALE:
* This symbol, if defined, indicates that the setlocale routine is
* available to handle locale-specific ctype implementations.
*/
-#$d_setlocale HAS_SETLOCALE /**/
+#define HAS_SETLOCALE /**/
/* HAS_SETPGID:
* This symbol, if defined, indicates that the setpgid(pid, gpid)
* routine is available to set process group ID.
*/
-#$d_setpgid HAS_SETPGID /**/
+#define HAS_SETPGID /**/
/* HAS_SETPGRP2:
* This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
* routine is available to set the current process group.
*/
-#$d_setpgrp2 HAS_SETPGRP2 /**/
+/*#define HAS_SETPGRP2 /**/
/* HAS_SETPRIORITY:
* This symbol, if defined, indicates that the setpriority routine is
* available to set a process's priority.
*/
-#$d_setprior HAS_SETPRIORITY /**/
+/*#define HAS_SETPRIORITY /**/
/* HAS_SETREGID:
* This symbol, if defined, indicates that the setregid routine is
* available to change the real, effective and saved gid of the current
* process.
*/
-#$d_setregid HAS_SETREGID /**/
-#$d_setresgid HAS_SETRESGID /**/
+/*#define HAS_SETREGID /**/
+/*#define HAS_SETRESGID /**/
/* HAS_SETREUID:
* This symbol, if defined, indicates that the setreuid routine is
* available to change the real, effective and saved uid of the current
* process.
*/
-#$d_setreuid HAS_SETREUID /**/
-#$d_setresuid HAS_SETRESUID /**/
+/*#define HAS_SETREUID /**/
+/*#define HAS_SETRESUID /**/
/* HAS_SETRGID:
* This symbol, if defined, indicates that the setrgid routine is available
* to change the real gid of the current program.
*/
-#$d_setrgid HAS_SETRGID /**/
+/*#define HAS_SETRGID /**/
/* HAS_SETRUID:
* This symbol, if defined, indicates that the setruid routine is available
* to change the real uid of the current program.
*/
-#$d_setruid HAS_SETRUID /**/
+/*#define HAS_SETRUID /**/
/* HAS_SETSID:
* This symbol, if defined, indicates that the setsid routine is
* available to set the process group ID.
*/
-#$d_setsid HAS_SETSID /**/
+#define HAS_SETSID /**/
/* Shmat_t:
* This symbol holds the return type of the shmat() system call.
* but not always right so it should be emitted by the program only
* when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
-#define Shmat_t $shmattype /**/
-#$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/
+#define Shmat_t void * /**/
+#define HAS_SHMAT_PROTOTYPE /**/
/* HAS_STRCHR:
* This symbol is defined to indicate that the strchr()/strrchr()
* This symbol is defined to indicate that the index()/rindex()
* functions are available for string searching.
*/
-#$d_strchr HAS_STRCHR /**/
-#$d_index HAS_INDEX /**/
+#define HAS_STRCHR /**/
+/*#define HAS_INDEX /**/
/* HAS_STRCOLL:
* This symbol, if defined, indicates that the strcoll routine is
* available to compare strings using collating information.
*/
-#$d_strcoll HAS_STRCOLL /**/
+#define HAS_STRCOLL /**/
/* USE_STRUCT_COPY:
* This symbol, if defined, indicates that this C compiler knows how
* to copy structures. If undefined, you'll need to use a block copy
* routine of some sort instead.
*/
-#$d_strctcpy USE_STRUCT_COPY /**/
+#define USE_STRUCT_COPY /**/
/* HAS_STRTOD:
* This symbol, if defined, indicates that the strtod routine is
* available to provide better numeric string conversion than atof().
*/
-#$d_strtod HAS_STRTOD /**/
+#define HAS_STRTOD /**/
/* HAS_STRTOL:
* This symbol, if defined, indicates that the strtol routine is available
* to provide better numeric string conversion than atoi() and friends.
*/
-#$d_strtol HAS_STRTOL /**/
+#define HAS_STRTOL /**/
+
+/* HAS_STRTOQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to long longs (quads).
+ */
+/*#define HAS_STRTOQ /**/
+
+/* HAS_STRTOQ:
+ * This symbol, if defined, indicates that the strtouq routine is
+ * available to convert strings to long longs (quads).
+ */
+/*#define HAS_STRTOQ /**/
/* HAS_STRTOUL:
* This symbol, if defined, indicates that the strtoul routine is
* available to provide conversion of strings to unsigned long.
*/
-#$d_strtoul HAS_STRTOUL /**/
+#define HAS_STRTOUL /**/
/* HAS_STRXFRM:
* This symbol, if defined, indicates that the strxfrm() routine is
* available to transform strings.
*/
-#$d_strxfrm HAS_STRXFRM /**/
+#define HAS_STRXFRM /**/
/* HAS_SYMLINK:
* This symbol, if defined, indicates that the symlink routine is available
* to create symbolic links.
*/
-#$d_symlink HAS_SYMLINK /**/
+#define HAS_SYMLINK /**/
/* HAS_SYSCALL:
* This symbol, if defined, indicates that the syscall routine is
* available to call arbitrary system calls. If undefined, that's tough.
*/
-#$d_syscall HAS_SYSCALL /**/
+/*#define HAS_SYSCALL /**/
/* HAS_SYSCONF:
* This symbol, if defined, indicates that sysconf() is available
* to determine system related limits and options.
*/
-#$d_sysconf HAS_SYSCONF /**/
+#define HAS_SYSCONF /**/
/* HAS_SYSTEM:
* This symbol, if defined, indicates that the system routine is
* available to issue a shell command.
*/
-#$d_system HAS_SYSTEM /**/
+#define HAS_SYSTEM /**/
/* HAS_TCGETPGRP:
* This symbol, if defined, indicates that the tcgetpgrp routine is
* available to get foreground process group ID.
*/
-#$d_tcgetpgrp HAS_TCGETPGRP /**/
+#define HAS_TCGETPGRP /**/
/* HAS_TCSETPGRP:
* This symbol, if defined, indicates that the tcsetpgrp routine is
* available to set foreground process group ID.
*/
-#$d_tcsetpgrp HAS_TCSETPGRP /**/
+#define HAS_TCSETPGRP /**/
/* HAS_TRUNCATE:
* This symbol, if defined, indicates that the truncate routine is
* available to truncate files.
*/
-#$d_truncate HAS_TRUNCATE /**/
+/*#define HAS_TRUNCATE /**/
/* HAS_TZNAME:
* This symbol, if defined, indicates that the tzname[] array is
* available to access timezone names.
*/
-#$d_tzname HAS_TZNAME /**/
+#define HAS_TZNAME /**/
/* HAS_UMASK:
* This symbol, if defined, indicates that the umask routine is
* available to set and get the value of the file creation mask.
*/
-#$d_umask HAS_UMASK /**/
+#define HAS_UMASK /**/
/* HASVOLATILE:
* This symbol, if defined, indicates that this C compiler knows about
* the volatile declaration.
*/
-#$d_volatile HASVOLATILE /**/
+#define HASVOLATILE /**/
#ifndef HASVOLATILE
#define volatile
#endif
/* HAS_WAIT4:
* This symbol, if defined, indicates that wait4() exists.
*/
-#$d_wait4 HAS_WAIT4 /**/
+#define HAS_WAIT4 /**/
/* HAS_WAITPID:
* This symbol, if defined, indicates that the waitpid routine is
* available to wait for child process.
*/
-#$d_waitpid HAS_WAITPID /**/
+#define HAS_WAITPID /**/
/* HAS_WCSTOMBS:
* This symbol, if defined, indicates that the wcstombs routine is
* available to convert wide character strings to multibyte strings.
*/
-#$d_wcstombs HAS_WCSTOMBS /**/
+#define HAS_WCSTOMBS /**/
/* HAS_WCTOMB:
* This symbol, if defined, indicates that the wctomb routine is available
* to covert a wide character to a multibyte.
*/
-#$d_wctomb HAS_WCTOMB /**/
+#define HAS_WCTOMB /**/
/* I_ARPA_INET:
* This symbol, if defined, indicates to the C program that it should
* include <arpa/inet.h> to get inet_addr and friends declarations.
*/
-#$i_arpainet I_ARPA_INET /**/
+#define I_ARPA_INET /**/
/* I_DBM:
* This symbol, if defined, indicates that <dbm.h> exists and should
* This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
* should be included.
*/
-#$i_dbm I_DBM /**/
-#$i_rpcsvcdbm I_RPCSVC_DBM /**/
+/*#define I_DBM /**/
+/*#define I_RPCSVC_DBM /**/
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* whether dirent is available or not. You should use this pseudo type to
* portably declare your directory entries.
*/
-#$i_dirent I_DIRENT /**/
-#$d_dirnamlen DIRNAMLEN /**/
-#define Direntry_t $direntrytype
+#define I_DIRENT /**/
+/*#define DIRNAMLEN /**/
+#define Direntry_t struct dirent
/* I_DLFCN:
* This symbol, if defined, indicates that <dlfcn.h> exists and should
* be included.
*/
-#$i_dlfcn I_DLFCN /**/
+/*#define I_DLFCN /**/
/* I_FCNTL:
* This manifest constant tells the C program to include <fcntl.h>.
*/
-#$i_fcntl I_FCNTL /**/
+#define I_FCNTL /**/
/* I_FLOAT:
* This symbol, if defined, indicates to the C program that it should
* include <float.h> to get definition of symbols like DBL_MAX or
* DBL_MIN, i.e. machine dependent floating point values.
*/
-#$i_float I_FLOAT /**/
+#define I_FLOAT /**/
/* I_LIMITS:
* This symbol, if defined, indicates to the C program that it should
* include <limits.h> to get definition of symbols like WORD_BIT or
* LONG_MAX, i.e. machine dependant limitations.
*/
-#$i_limits I_LIMITS /**/
+#define I_LIMITS /**/
/* I_LOCALE:
* This symbol, if defined, indicates to the C program that it should
* include <locale.h>.
*/
-#$i_locale I_LOCALE /**/
+#define I_LOCALE /**/
/* I_MATH:
* This symbol, if defined, indicates to the C program that it should
* include <math.h>.
*/
-#$i_math I_MATH /**/
+#define I_MATH /**/
/* I_MEMORY:
* This symbol, if defined, indicates to the C program that it should
* include <memory.h>.
*/
-#$i_memory I_MEMORY /**/
+/*#define I_MEMORY /**/
/* I_NDBM:
* This symbol, if defined, indicates that <ndbm.h> exists and should
* be included.
*/
-#$i_ndbm I_NDBM /**/
+/*#define I_NDBM /**/
/* I_NET_ERRNO:
* This symbol, if defined, indicates that <net/errno.h> exists and
* should be included.
*/
-#$i_neterrno I_NET_ERRNO /**/
+/*#define I_NET_ERRNO /**/
/* I_NETINET_IN:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/in.h>. Otherwise, you may try <sys/in.h>.
*/
-#$i_niin I_NETINET_IN /**/
+#define I_NETINET_IN /**/
/* I_SFIO:
* This symbol, if defined, indicates to the C program that it should
* include <sfio.h>.
*/
-#$i_sfio I_SFIO /**/
+/*#define I_SFIO /**/
/* I_STDDEF:
* This symbol, if defined, indicates that <stddef.h> exists and should
* be included.
*/
-#$i_stddef I_STDDEF /**/
+#define I_STDDEF /**/
/* I_STDLIB:
* This symbol, if defined, indicates that <stdlib.h> exists and should
* be included.
*/
-#$i_stdlib I_STDLIB /**/
+#define I_STDLIB /**/
/* I_STRING:
* This symbol, if defined, indicates to the C program that it should
* include <string.h> (USG systems) instead of <strings.h> (BSD systems).
*/
-#$i_string I_STRING /**/
+#define I_STRING /**/
/* I_SYS_DIR:
* This symbol, if defined, indicates to the C program that it should
* include <sys/dir.h>.
*/
-#$i_sysdir I_SYS_DIR /**/
+/*#define I_SYS_DIR /**/
/* I_SYS_FILE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/file.h> to get definition of R_OK and friends.
*/
-#$i_sysfile I_SYS_FILE /**/
+/*#define I_SYS_FILE /**/
/* I_SYS_IOCTL:
* This symbol, if defined, indicates that <sys/ioctl.h> exists and should
* be included. Otherwise, include <sgtty.h> or <termio.h>.
*/
-#$i_sysioctl I_SYS_IOCTL /**/
+#define I_SYS_IOCTL /**/
/* I_SYS_NDIR:
* This symbol, if defined, indicates to the C program that it should
* include <sys/ndir.h>.
*/
-#$i_sysndir I_SYS_NDIR /**/
+/*#define I_SYS_NDIR /**/
/* I_SYS_PARAM:
* This symbol, if defined, indicates to the C program that it should
* include <sys/param.h>.
*/
-#$i_sysparam I_SYS_PARAM /**/
+/*#define I_SYS_PARAM /**/
/* I_SYS_RESOURCE:
* This symbol, if defined, indicates to the C program that it should
* include <sys/resource.h>.
*/
-#$i_sysresrc I_SYS_RESOURCE /**/
+/*#define I_SYS_RESOURCE /**/
/* I_SYS_SELECT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/select.h> in order to get definition of struct timeval.
*/
-#$i_sysselct I_SYS_SELECT /**/
+#define I_SYS_SELECT /**/
/* I_SYS_STAT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/stat.h>.
*/
-#$i_sysstat I_SYS_STAT /**/
+#define I_SYS_STAT /**/
/* I_SYS_TIMES:
* This symbol, if defined, indicates to the C program that it should
* include <sys/times.h>.
*/
-#$i_systimes I_SYS_TIMES /**/
+#define I_SYS_TIMES /**/
/* I_SYS_TYPES:
* This symbol, if defined, indicates to the C program that it should
* include <sys/types.h>.
*/
-#$i_systypes I_SYS_TYPES /**/
+#define I_SYS_TYPES /**/
/* I_SYS_UN:
* This symbol, if defined, indicates to the C program that it should
* include <sys/un.h> to get UNIX domain socket definitions.
*/
-#$i_sysun I_SYS_UN /**/
+/*#define I_SYS_UN /**/
/* I_SYS_WAIT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/wait.h>.
*/
-#$i_syswait I_SYS_WAIT /**/
+#define I_SYS_WAIT /**/
/* I_TERMIO:
* This symbol, if defined, indicates that the program should include
* <sgtty.h> rather than <termio.h>. There are also differences in
* the ioctl() calls that depend on the value of this symbol.
*/
-#$i_termio I_TERMIO /**/
-#$i_termios I_TERMIOS /**/
-#$i_sgtty I_SGTTY /**/
+/*#define I_TERMIO /**/
+#define I_TERMIOS /**/
+/*#define I_SGTTY /**/
/* I_UNISTD:
* This symbol, if defined, indicates to the C program that it should
* include <unistd.h>.
*/
-#$i_unistd I_UNISTD /**/
+#define I_UNISTD /**/
/* I_UTIME:
* This symbol, if defined, indicates to the C program that it should
* include <utime.h>.
*/
-#$i_utime I_UTIME /**/
+#define I_UTIME /**/
/* I_VALUES:
* This symbol, if defined, indicates to the C program that it should
* MAXLONG, i.e. machine dependant limitations. Probably, you
* should use <limits.h> instead, if it is available.
*/
-#$i_values I_VALUES /**/
+#define I_VALUES /**/
/* I_STDARG:
* This symbol, if defined, indicates that <stdarg.h> exists and should
* This symbol, if defined, indicates to the C program that it should
* include <varargs.h>.
*/
-#$i_stdarg I_STDARG /**/
-#$i_varargs I_VARARGS /**/
+#define I_STDARG /**/
+/*#define I_VARARGS /**/
/* I_VFORK:
* This symbol, if defined, indicates to the C program that it should
* include vfork.h.
*/
-#$i_vfork I_VFORK /**/
+/*#define I_VFORK /**/
/* CAN_PROTOTYPE:
* If defined, this macro indicates that the C compiler can handle
*
* int main _((int argc, char *argv[]));
*/
-#$prototype CAN_PROTOTYPE /**/
+#define CAN_PROTOTYPE /**/
#ifdef CAN_PROTOTYPE
#define _(args) args
#else
* /bin/pdksh, /bin/ash, /bin/bash, or even something such as
* D:/bin/sh.exe.
*/
-#define SH_PATH "$sh" /**/
+#define SH_PATH "/system/ported/command_library/bash.pm" /**/
/* STDCHAR:
* This symbol is defined to be the type of char used in stdio.h.
* It has the values "unsigned char" or "char".
*/
-#define STDCHAR $stdchar /**/
+#define STDCHAR unsigned char /**/
/* CROSSCOMPILE:
* This symbol, if defined, signifies that we our
* build process is a cross-compilation.
*/
-#$crosscompile CROSSCOMPILE /**/
+/*#define CROSSCOMPILE /**/
/* INTSIZE:
* This symbol contains the value of sizeof(int) so that the C
* This symbol contains the value of sizeof(short) so that the C
* preprocessor can make decisions based on it.
*/
-#define INTSIZE $intsize /**/
-#define LONGSIZE $longsize /**/
-#define SHORTSIZE $shortsize /**/
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
/* MULTIARCH:
* This symbol, if defined, signifies that the build
* example with the NeXT "fat" binaries that contain executables
* for several CPUs.
*/
-#$multiarch MULTIARCH /**/
+/*#define MULTIARCH /**/
/* HAS_QUAD:
* This symbol, if defined, tells that there's a 64-bit integer type,
* Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one
* of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T.
*/
-#$d_quad HAS_QUAD /**/
+/*#define HAS_QUAD /**/
#ifdef HAS_QUAD
-# define Quad_t $quadtype /**/
-# define Uquad_t $uquadtype /**/
-# define QUADKIND $quadkind /**/
+# define Quad_t _error_ /**/
+# define Uquad_t _error_ /**/
+# define QUADKIND _error_ /**/
# define QUAD_IS_INT 1
# define QUAD_IS_LONG 2
# define QUAD_IS_LONG_LONG 3
* This symbol, if defined, indicates that the accessx routine is
* available to do extended access checks.
*/
-#$d_accessx HAS_ACCESSX /**/
+/*#define HAS_ACCESSX /**/
/* HAS_EACCESS:
* This symbol, if defined, indicates that the eaccess routine is
* available to do extended access checks.
*/
-#$d_eaccess HAS_EACCESS /**/
+/*#define HAS_EACCESS /**/
/* I_SYS_ACCESS:
* This symbol, if defined, indicates to the C program that it should
* include <sys/access.h>.
*/
-#$i_sysaccess I_SYS_ACCESS /**/
+/*#define I_SYS_ACCESS /**/
/* I_SYS_SECURITY:
* This symbol, if defined, indicates to the C program that it should
* include <sys/security.h>.
*/
-#$i_syssecrt I_SYS_SECURITY /**/
+/*#define I_SYS_SECURITY /**/
/* OSNAME:
* This symbol contains the name of the operating system, as determined
* by Configure. You shouldn't rely on it too much; the specific
* feature tests from Configure are generally more reliable.
*/
-#define OSNAME "$osname" /**/
+#define OSNAME "VOS" /**/
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
#if defined(CROSSCOMPILE) || defined(MULTIARCH)
# define MEM_ALIGNBYTES 8
#else
-#define MEM_ALIGNBYTES $alignbytes
+#define MEM_ALIGNBYTES 8
#endif
/* ARCHLIB:
* This variable, if defined, holds the name of the directory in
* which the user wants to put architecture-dependent public
- * library files for $package. It is most often a local directory
+ * library files for perl5. It is most often a local directory
* such as /usr/local/lib. Programs using this variable must be
* prepared to deal with filename expansion. If ARCHLIB is the
* same as PRIVLIB, it is not defined, since presumably the
* This symbol contains the ~name expanded version of ARCHLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#$d_archlib ARCHLIB "$archlib" /**/
-#$d_archlib ARCHLIB_EXP "$archlibexp" /**/
+/*#define ARCHLIB "" /**/
+/*#define ARCHLIB_EXP "" /**/
/* ARCHNAME:
* This symbol holds a string representing the architecture name.
* where library files may be held under a private library, for
* instance.
*/
-#define ARCHNAME "$archname" /**/
+#define ARCHNAME "vos" /**/
/* HAS_ATOLF:
* This symbol, if defined, indicates that the atolf routine is
* available to convert strings into long doubles.
*/
-#$d_atolf HAS_ATOLF /**/
+/*#define HAS_ATOLF /**/
/* HAS_ATOLL:
* This symbol, if defined, indicates that the atoll routine is
* available to convert strings into long longs.
*/
-#$d_atoll HAS_ATOLL /**/
+/*#define HAS_ATOLL /**/
/* BIN:
* This symbol holds the path of the bin directory where the package will
* This symbol is the filename expanded version of the BIN symbol, for
* programs that do not want to deal with that at run-time.
*/
-#define BIN "$bin" /**/
-#define BIN_EXP "$binexp" /**/
+#define BIN "/system/ported/command_library" /**/
+#define BIN_EXP "/system/ported/command_library" /**/
/* PERL_BINCOMPAT_5005:
* This symbol, if defined, indicates that this version of Perl should be
* that use features like threads and multiplicity it is always $undef
* for those versions.
*/
-#$d_bincompat5005 PERL_BINCOMPAT_5005 /**/
+/*#define PERL_BINCOMPAT_5005 /**/
/* BYTEORDER:
* This symbol holds the hexadecimal constant defined in byteorder,
# define BYTEORDER 0x4321
# endif
#else
-#define BYTEORDER 0x$byteorder /* large digits for MSB */
+#define BYTEORDER 0x4321 /* large digits for MSB */
#endif /* NeXT */
/* CAT2:
/* STRINGIFY:
* This macro surrounds its token with double quotes.
*/
-#if $cpp_stuff == 1
+#if 42 == 1
#define CAT2(a,b) a/**/b
#define STRINGIFY(a) "a"
/* If you can get stringification with catify, tell me how! */
#endif
-#if $cpp_stuff == 42
+#if 42 == 42
#define PeRl_CaTiFy(a, b) a ## b
#define PeRl_StGiFy(a) #a
/* the additional level of indirection enables these macros to be
#define StGiFy(a) PeRl_StGiFy(a)
#define STRINGIFY(a) PeRl_StGiFy(a)
#endif
-#if $cpp_stuff != 1 && $cpp_stuff != 42
+#if 42 != 1 && 42 != 42
# include "Bletch: How does this C preprocessor catenate tokens?"
#endif
* This symbol is intended to be used along with CPPRUN in the same manner
* symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "".
*/
-#define CPPSTDIN "$cppstdin"
-#define CPPMINUS "$cppminus"
-#define CPPRUN "$cpprun"
-#define CPPLAST "$cpplast"
+#define CPPSTDIN "cc -E"
+#define CPPMINUS "-"
+#define CPPRUN "cc -E -"
+#define CPPLAST "-"
/* HAS_ACCESS:
* This manifest constant lets the C program know that the access()
* system call is available to check for accessibility using real UID/GID.
* (always present on UNIX.)
*/
-#$d_access HAS_ACCESS /**/
+#define HAS_ACCESS /**/
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
*/
-#$d_casti32 CASTI32 /**/
+/*#define CASTI32 /**/
/* CASTNEGFLOAT:
* This symbol is defined if the C compiler can cast negative
* 2 = couldn't cast >= 0x80000000
* 4 = couldn't cast in argument expression list
*/
-#$d_castneg CASTNEGFLOAT /**/
-#define CASTFLAGS $castflags /**/
+#define CASTNEGFLOAT /**/
+#define CASTFLAGS 0 /**/
/* VOID_CLOSEDIR:
* This symbol, if defined, indicates that the closedir() routine
* does not return a value.
*/
-#$d_void_closedir VOID_CLOSEDIR /**/
+/*#define VOID_CLOSEDIR /**/
/* HAS_CSH:
* This symbol, if defined, indicates that the C-shell exists.
/* CSH:
* This symbol, if defined, contains the full pathname of csh.
*/
-#$d_csh HAS_CSH /**/
+#define HAS_CSH /**/
#ifdef HAS_CSH
-#define CSH "$full_csh" /**/
+#define CSH "/system/ported/command_library/bash.pm" /**/
#endif
/* DLSYM_NEEDS_UNDERSCORE:
* makes sense if you *have* dlsym, which we will presume is the
* case if you're using dl_dlopen.xs.
*/
-#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/
+/*#define DLSYM_NEEDS_UNDERSCORE /**/
/* HAS_DRAND48_PROTO:
* This symbol, if defined, indicates that the system provides
* to the program to supply one. A good guess is
* extern double drand48 _((void));
*/
-#$d_drand48proto HAS_DRAND48_PROTO /**/
+/*#define HAS_DRAND48_PROTO /**/
/* HAS_ENDGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for finalizing sequential access of the group database.
*/
-#$d_endgrent HAS_ENDGRENT /**/
+/*#define HAS_ENDGRENT /**/
/* HAS_ENDHOSTENT:
* This symbol, if defined, indicates that the endhostent() routine is
* available to close whatever was being used for host queries.
*/
-#$d_endhent HAS_ENDHOSTENT /**/
+#define HAS_ENDHOSTENT /**/
/* HAS_ENDNETENT:
* This symbol, if defined, indicates that the endnetent() routine is
* available to close whatever was being used for network queries.
*/
-#$d_endnent HAS_ENDNETENT /**/
+#define HAS_ENDNETENT /**/
/* HAS_ENDPROTOENT:
* This symbol, if defined, indicates that the endprotoent() routine is
* available to close whatever was being used for protocol queries.
*/
-#$d_endpent HAS_ENDPROTOENT /**/
+#define HAS_ENDPROTOENT /**/
/* HAS_ENDPWENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for finalizing sequential access of the passwd database.
*/
-#$d_endpwent HAS_ENDPWENT /**/
+/*#define HAS_ENDPWENT /**/
/* HAS_ENDSERVENT:
* This symbol, if defined, indicates that the endservent() routine is
* available to close whatever was being used for service queries.
*/
-#$d_endsent HAS_ENDSERVENT /**/
+#define HAS_ENDSERVENT /**/
/* HAS_FD_SET:
* This symbol, when defined, indicates presence of the fd_set typedef
* in <sys/types.h>
*/
-#$d_fd_set HAS_FD_SET /**/
+/*#define HAS_FD_SET /**/
/* FLEXFILENAMES:
* This symbol, if defined, indicates that the system supports filenames
* longer than 14 characters.
*/
-#$d_flexfnam FLEXFILENAMES /**/
+#define FLEXFILENAMES /**/
/* HAS_FPOS64_T:
* This symbol will be defined if the C compiler supports fpos64_t.
*/
-#$d_fpos64_t HAS_FPOS64_T /**/
+/*#define HAS_FPOS64_T /**/
/* HAS_FREXPL:
* This symbol, if defined, indicates that the frexpl routine is
* available to break a long double floating-point number into
* a normalized fraction and an integral power of 2.
*/
-#$d_frexpl HAS_FREXPL /**/
+/*#define HAS_FREXPL /**/
/* HAS_STRUCT_FS_DATA:
* This symbol, if defined, indicates that the struct fs_data
* to do statfs() is supported.
*/
-#$d_fs_data_s HAS_STRUCT_FS_DATA /**/
+/*#define HAS_STRUCT_FS_DATA /**/
/* HAS_FSEEKO:
* This symbol, if defined, indicates that the fseeko routine is
* available to fseek beyond 32 bits (useful for ILP32 hosts).
*/
-#$d_fseeko HAS_FSEEKO /**/
+/*#define HAS_FSEEKO /**/
/* HAS_FSTATFS:
* This symbol, if defined, indicates that the fstatfs routine is
* available to stat filesystems by file descriptors.
*/
-#$d_fstatfs HAS_FSTATFS /**/
+/*#define HAS_FSTATFS /**/
+
+/* HAS_FSYNC:
+ * This symbol, if defined, indicates that the fsync routine is
+ * available to write a file's modified data and attributes to
+ * permanent storage.
+ */
+/*#define HAS_FSYNC /**/
/* HAS_FTELLO:
* This symbol, if defined, indicates that the ftello routine is
* available to ftell beyond 32 bits (useful for ILP32 hosts).
*/
-#$d_ftello HAS_FTELLO /**/
+/*#define HAS_FTELLO /**/
/* Gconvert:
* This preprocessor macro is defined to convert a floating point
* d_Gconvert='sprintf((b),"%.*g",(n),(x))'
* The last two assume trailing zeros should not be kept.
*/
-#define Gconvert(x,n,t,b) $d_Gconvert
+#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x))
/* HAS_GETCWD:
* This symbol, if defined, indicates that the getcwd routine is
* available to get the current working directory.
*/
-#$d_getcwd HAS_GETCWD /**/
+#define HAS_GETCWD /**/
/* HAS_GETESPWNAM:
* This symbol, if defined, indicates that the getespwnam system call is
* available to retrieve enchanced (shadow) password entries by name.
*/
-#$d_getespwnam HAS_GETESPWNAM /**/
+/*#define HAS_GETESPWNAM /**/
/* HAS_GETFSSTAT:
* This symbol, if defined, indicates that the getfsstat routine is
* available to stat filesystems in bulk.
*/
-#$d_getfsstat HAS_GETFSSTAT /**/
+/*#define HAS_GETFSSTAT /**/
/* HAS_GETGRENT:
* This symbol, if defined, indicates that the getgrent routine is
* available for sequential access of the group database.
*/
-#$d_getgrent HAS_GETGRENT /**/
+/*#define HAS_GETGRENT /**/
/* HAS_GETHOSTBYADDR:
* This symbol, if defined, indicates that the gethostbyaddr() routine is
* available to look up hosts by their IP addresses.
*/
-#$d_gethbyaddr HAS_GETHOSTBYADDR /**/
+#define HAS_GETHOSTBYADDR /**/
/* HAS_GETHOSTBYNAME:
* This symbol, if defined, indicates that the gethostbyname() routine is
* available to look up host names in some data base or other.
*/
-#$d_gethbyname HAS_GETHOSTBYNAME /**/
+#define HAS_GETHOSTBYNAME /**/
/* HAS_GETHOSTENT:
* This symbol, if defined, indicates that the gethostent() routine is
* available to look up host names in some data base or another.
*/
-#$d_gethent HAS_GETHOSTENT /**/
+#define HAS_GETHOSTENT /**/
/* HAS_GETHOSTNAME:
* This symbol, if defined, indicates that the C program may use the
* contents of PHOSTNAME as a command to feed to the popen() routine
* to derive the host name.
*/
-#$d_gethname HAS_GETHOSTNAME /**/
-#$d_uname HAS_UNAME /**/
-#$d_phostname HAS_PHOSTNAME /**/
+#define HAS_GETHOSTNAME /**/
+#define HAS_UNAME /**/
+/*#define HAS_PHOSTNAME /**/
#ifdef HAS_PHOSTNAME
-#define PHOSTNAME "$aphostname" /* How to get the host name */
+#define PHOSTNAME "" /* How to get the host name */
#endif
/* HAS_GETHOST_PROTOS:
* gethostbyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#$d_gethostprotos HAS_GETHOST_PROTOS /**/
+#define HAS_GETHOST_PROTOS /**/
/* HAS_GETMNT:
* This symbol, if defined, indicates that the getmnt routine is
* available to get filesystem mount info by filename.
*/
-#$d_getmnt HAS_GETMNT /**/
+/*#define HAS_GETMNT /**/
/* HAS_GETMNTENT:
* This symbol, if defined, indicates that the getmntent routine is
* available to iterate through mounted file systems to get their info.
*/
-#$d_getmntent HAS_GETMNTENT /**/
+/*#define HAS_GETMNTENT /**/
/* HAS_GETNETBYADDR:
* This symbol, if defined, indicates that the getnetbyaddr() routine is
* available to look up networks by their IP addresses.
*/
-#$d_getnbyaddr HAS_GETNETBYADDR /**/
+#define HAS_GETNETBYADDR /**/
/* HAS_GETNETBYNAME:
* This symbol, if defined, indicates that the getnetbyname() routine is
* available to look up networks by their names.
*/
-#$d_getnbyname HAS_GETNETBYNAME /**/
+#define HAS_GETNETBYNAME /**/
/* HAS_GETNETENT:
* This symbol, if defined, indicates that the getnetent() routine is
* available to look up network names in some data base or another.
*/
-#$d_getnent HAS_GETNETENT /**/
+#define HAS_GETNETENT /**/
/* HAS_GETNET_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* getnetbyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#$d_getnetprotos HAS_GETNET_PROTOS /**/
+#define HAS_GETNET_PROTOS /**/
/* HAS_GETPROTOENT:
* This symbol, if defined, indicates that the getprotoent() routine is
* available to look up protocols in some data base or another.
*/
-#$d_getpent HAS_GETPROTOENT /**/
+#define HAS_GETPROTOENT /**/
/* HAS_GETPROTOBYNAME:
* This symbol, if defined, indicates that the getprotobyname()
* This symbol, if defined, indicates that the getprotobynumber()
* routine is available to look up protocols by their number.
*/
-#$d_getpbyname HAS_GETPROTOBYNAME /**/
-#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/
+#define HAS_GETPROTOBYNAME /**/
+#define HAS_GETPROTOBYNUMBER /**/
/* HAS_GETPROTO_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* getprotobyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/
+#define HAS_GETPROTO_PROTOS /**/
/* HAS_GETPRPWNAM:
* This symbol, if defined, indicates that the getprpwnam system call is
* available to retrieve protected (shadow) password entries by name.
*/
-#$d_getprpwnam HAS_GETPRPWNAM /**/
+/*#define HAS_GETPRPWNAM /**/
/* HAS_GETPWENT:
* This symbol, if defined, indicates that the getpwent routine is
* available for sequential access of the passwd database.
* If this is not available, the older getpw() function may be available.
*/
-#$d_getpwent HAS_GETPWENT /**/
+/*#define HAS_GETPWENT /**/
/* HAS_GETSERVENT:
* This symbol, if defined, indicates that the getservent() routine is
* available to look up network services in some data base or another.
*/
-#$d_getsent HAS_GETSERVENT /**/
+#define HAS_GETSERVENT /**/
/* HAS_GETSERV_PROTOS:
* This symbol, if defined, indicates that <netdb.h> includes
* getservbyaddr(). Otherwise, it is up to the program to guess
* them. See netdbtype.U for probing for various Netdb_xxx_t types.
*/
-#$d_getservprotos HAS_GETSERV_PROTOS /**/
+#define HAS_GETSERV_PROTOS /**/
/* HAS_GETSPNAM:
* This symbol, if defined, indicates that the getspnam system call is
* available to retrieve SysV shadow password entries by name.
*/
-#$d_getspnam HAS_GETSPNAM /**/
+/*#define HAS_GETSPNAM /**/
/* HAS_GETSERVBYNAME:
* This symbol, if defined, indicates that the getservbyname()
* This symbol, if defined, indicates that the getservbyport()
* routine is available to look up services by their port.
*/
-#$d_getsbyname HAS_GETSERVBYNAME /**/
-#$d_getsbyport HAS_GETSERVBYPORT /**/
+#define HAS_GETSERVBYNAME /**/
+#define HAS_GETSERVBYPORT /**/
/* HAS_GNULIBC:
* This symbol, if defined, indicates to the C program that
* the GNU C library is being used.
*/
-#$d_gnulibc HAS_GNULIBC /**/
+/*#define HAS_GNULIBC /**/
#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE)
# define _GNU_SOURCE
#endif
* This symbol, if defined, indicates that the hasmntopt routine is
* available to query the mount options of file systems.
*/
-#$d_hasmntopt HAS_HASMNTOPT /**/
+/*#define HAS_HASMNTOPT /**/
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* friends htonl() htons() ntohl()) are available to do network
* order byte swapping.
*/
-#$d_htonl HAS_HTONL /**/
-#$d_htonl HAS_HTONS /**/
-#$d_htonl HAS_NTOHL /**/
-#$d_htonl HAS_NTOHS /**/
+#define HAS_HTONL /**/
+#define HAS_HTONS /**/
+#define HAS_NTOHL /**/
+#define HAS_NTOHS /**/
/* HAS_ICONV:
* This symbol, if defined, indicates that the iconv routine is
* available to do character set conversions.
*/
-#$d_iconv HAS_ICONV /**/
+/*#define HAS_ICONV /**/
/* HAS_INT64_T:
* This symbol will defined if the C compiler supports int64_t.
* Usually the <inttypes.h> needs to be included, but sometimes
* <sys/types.h> is enough.
*/
-#$d_int64_t HAS_INT64_T /**/
+/*#define HAS_INT64_T /**/
/* HAS_ISASCII:
* This manifest constant lets the C program know that isascii
* is available.
*/
-#$d_isascii HAS_ISASCII /**/
+#define HAS_ISASCII /**/
/* HAS_ISNAN:
* This symbol, if defined, indicates that the isnan routine is
* available to check whether a double is a NaN.
*/
-#$d_isnan HAS_ISNAN /**/
+/*#define HAS_ISNAN /**/
/* HAS_ISNANL:
* This symbol, if defined, indicates that the isnanl routine is
* available to check whether a long double is a NaN.
*/
-#$d_isnanl HAS_ISNANL /**/
+/*#define HAS_ISNANL /**/
/* HAS_LCHOWN:
* This symbol, if defined, indicates that the lchown routine is
* available to operate on a symbolic link (instead of following the
* link).
*/
-#$d_lchown HAS_LCHOWN /**/
+/*#define HAS_LCHOWN /**/
/* HAS_LDBL_DIG:
* This symbol, if defined, indicates that this system's <float.h>
* of significant digits in a long double precision number. Unlike
* for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined.
*/
-#$d_ldbl_dig HAS_LDBL_DIG /* */
+#define HAS_LDBL_DIG /* */
/* HAS_LONG_DOUBLE:
* This symbol will be defined if the C compiler supports long
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long doubles.
*/
-#$d_longdbl HAS_LONG_DOUBLE /**/
+#define HAS_LONG_DOUBLE /**/
#ifdef HAS_LONG_DOUBLE
-#define LONG_DOUBLESIZE $longdblsize /**/
+#define LONG_DOUBLESIZE 8 /**/
#endif
/* HAS_LONG_LONG:
* C preprocessor can make decisions based on it. It is only
* defined if the system supports long long.
*/
-#$d_longlong HAS_LONG_LONG /**/
+/*#define HAS_LONG_LONG /**/
#ifdef HAS_LONG_LONG
-#define LONGLONGSIZE $longlongsize /**/
+#define LONGLONGSIZE _error_ /**/
#endif
/* HAS_LSEEK_PROTO:
* to the program to supply one. A good guess is
* extern off_t lseek(int, off_t, int);
*/
-#$d_lseekproto HAS_LSEEK_PROTO /**/
+#define HAS_LSEEK_PROTO /**/
/* HAS_MADVISE:
* This symbol, if defined, indicates that the madvise system call is
* available to map a file into memory.
*/
-#$d_madvise HAS_MADVISE /**/
+/*#define HAS_MADVISE /**/
/* HAS_MEMCHR:
* This symbol, if defined, indicates that the memchr routine is available
* to locate characters within a C string.
*/
-#$d_memchr HAS_MEMCHR /**/
+#define HAS_MEMCHR /**/
/* HAS_MKDTEMP:
* This symbol, if defined, indicates that the mkdtemp routine is
* available to exclusively create a uniquely named temporary directory.
*/
-#$d_mkdtemp HAS_MKDTEMP /**/
+/*#define HAS_MKDTEMP /**/
/* HAS_MKSTEMP:
* This symbol, if defined, indicates that the mkstemp routine is
* available to exclusively create and open a uniquely named
* temporary file.
*/
-#$d_mkstemp HAS_MKSTEMP /**/
+/*#define HAS_MKSTEMP /**/
/* HAS_MKSTEMPS:
* This symbol, if defined, indicates that the mkstemps routine is
* available to excluslvely create and open a uniquely named
* (with a suffix) temporary file.
*/
-#$d_mkstemps HAS_MKSTEMPS /**/
+/*#define HAS_MKSTEMPS /**/
/* HAS_MMAP:
* This symbol, if defined, indicates that the mmap system call is
* (and simultaneously the type of the first argument).
* Usually set to 'void *' or 'cadd_t'.
*/
-#$d_mmap HAS_MMAP /**/
-#define Mmap_t $mmaptype /**/
+#define HAS_MMAP /**/
+#define Mmap_t void * /**/
/* HAS_MODFL:
* This symbol, if defined, indicates that the modfl routine is
* available to split a long double x into a fractional part f and
* an integer part i such that |f| < 1.0 and (f + i) = x.
*/
-#$d_modfl HAS_MODFL /**/
+/*#define HAS_MODFL /**/
/* HAS_MPROTECT:
* This symbol, if defined, indicates that the mprotect system call is
* available to modify the access protection of a memory mapped file.
*/
-#$d_mprotect HAS_MPROTECT /**/
+/*#define HAS_MPROTECT /**/
/* HAS_MSG:
* This symbol, if defined, indicates that the entire msg*(2) library is
* supported (IPC mechanism based on message queues).
*/
-#$d_msg HAS_MSG /**/
+/*#define HAS_MSG /**/
/* HAS_OFF64_T:
* This symbol will be defined if the C compiler supports off64_t.
*/
-#$d_off64_t HAS_OFF64_T /**/
+/*#define HAS_OFF64_T /**/
/* HAS_OPEN3:
* This manifest constant lets the C program know that the three
* argument form of open(2) is available.
*/
-#$d_open3 HAS_OPEN3 /**/
+#define HAS_OPEN3 /**/
/* OLD_PTHREAD_CREATE_JOINABLE:
* This symbol, if defined, indicates how to create pthread
* If defined, known values are PTHREAD_CREATE_UNDETACHED
* and __UNDETACHED.
*/
-#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/
+/*#define OLD_PTHREAD_CREATE_JOINABLE /**/
/* HAS_PTHREAD_YIELD:
* This symbol, if defined, indicates that the pthread_yield
* routine is available to yield the execution of the current
* thread. sched_yield is preferable to pthread_yield.
*/
-#$d_pthread_yield HAS_PTHREAD_YIELD /**/
-#define SCHED_YIELD $sched_yield /**/
-#$d_sched_yield HAS_SCHED_YIELD /**/
+/*#define HAS_PTHREAD_YIELD /**/
+#define SCHED_YIELD /**/
+/*#define HAS_SCHED_YIELD /**/
/* HAS_SAFE_BCOPY:
* This symbol, if defined, indicates that the bcopy routine is available
* probably use memmove() or memcpy(). If neither is defined, roll your
* own version.
*/
-#$d_safebcpy HAS_SAFE_BCOPY /**/
+/*#define HAS_SAFE_BCOPY /**/
/* HAS_SAFE_MEMCPY:
* This symbol, if defined, indicates that the memcpy routine is available
* probably use memmove() or memcpy(). If neither is defined, roll your
* own version.
*/
-#$d_safemcpy HAS_SAFE_MEMCPY /**/
+/*#define HAS_SAFE_MEMCPY /**/
/* HAS_SANE_MEMCMP:
* This symbol, if defined, indicates that the memcmp routine is available
* and can be used to compare relative magnitudes of chars with their high
* bits set. If it is not defined, roll your own version.
*/
-#$d_sanemcmp HAS_SANE_MEMCMP /**/
+#define HAS_SANE_MEMCMP /**/
+
+/* HAS_SBRK_PROTO:
+ * This symbol, if defined, indicates that the system provides
+ * a prototype for the sbrk() function. Otherwise, it is up
+ * to the program to supply one. Good guesses are
+ * extern void* sbrk _((int));
+ * extern void* sbrk _((size_t));
+ */
+/*#define HAS_SBRK_PROTO / **/
/* HAS_SEM:
* This symbol, if defined, indicates that the entire sem*(2) library is
* supported.
*/
-#$d_sem HAS_SEM /**/
+/*#define HAS_SEM /**/
/* HAS_SETGRENT:
* This symbol, if defined, indicates that the setgrent routine is
* available for initializing sequential access of the group database.
*/
-#$d_setgrent HAS_SETGRENT /**/
+/*#define HAS_SETGRENT /**/
/* HAS_SETGROUPS:
* This symbol, if defined, indicates that the setgroups() routine is
* available to set the list of process groups. If unavailable, multiple
* groups are probably not supported.
*/
-#$d_setgrps HAS_SETGROUPS /**/
+/*#define HAS_SETGROUPS /**/
/* HAS_SETHOSTENT:
* This symbol, if defined, indicates that the sethostent() routine is
* available.
*/
-#$d_sethent HAS_SETHOSTENT /**/
+#define HAS_SETHOSTENT /**/
/* HAS_SETNETENT:
* This symbol, if defined, indicates that the setnetent() routine is
* available.
*/
-#$d_setnent HAS_SETNETENT /**/
+#define HAS_SETNETENT /**/
/* HAS_SETPROTOENT:
* This symbol, if defined, indicates that the setprotoent() routine is
* available.
*/
-#$d_setpent HAS_SETPROTOENT /**/
+#define HAS_SETPROTOENT /**/
/* HAS_SETPROCTITLE:
* This symbol, if defined, indicates that the setproctitle routine is
* available to set process title.
*/
-#$d_setproctitle HAS_SETPROCTITLE /**/
+/*#define HAS_SETPROCTITLE /**/
/* HAS_SETPWENT:
* This symbol, if defined, indicates that the setpwent routine is
* available for initializing sequential access of the passwd database.
*/
-#$d_setpwent HAS_SETPWENT /**/
+/*#define HAS_SETPWENT /**/
/* HAS_SETSERVENT:
* This symbol, if defined, indicates that the setservent() routine is
* available.
*/
-#$d_setsent HAS_SETSERVENT /**/
+#define HAS_SETSERVENT /**/
/* HAS_SETVBUF:
* This symbol, if defined, indicates that the setvbuf routine is
* available to change buffering on an open stdio stream.
* to a line-buffered mode.
*/
-#$d_setvbuf HAS_SETVBUF /**/
+#define HAS_SETVBUF /**/
/* USE_SFIO:
* This symbol, if defined, indicates that sfio should
* be used.
*/
-#$d_sfio USE_SFIO /**/
+/*#define USE_SFIO /**/
/* HAS_SHM:
* This symbol, if defined, indicates that the entire shm*(2) library is
* supported.
*/
-#$d_shm HAS_SHM /**/
+/*#define HAS_SHM /**/
/* HAS_SIGACTION:
* This symbol, if defined, indicates that Vr4's sigaction() routine
* is available.
*/
-#$d_sigaction HAS_SIGACTION /**/
+#define HAS_SIGACTION /**/
/* HAS_SIGSETJMP:
* This variable indicates to the C program that the sigsetjmp()
* traditional longjmp() if siglongjmp isn't available.
* See HAS_SIGSETJMP.
*/
-#$d_sigsetjmp HAS_SIGSETJMP /**/
+#define HAS_SIGSETJMP /**/
#ifdef HAS_SIGSETJMP
#define Sigjmp_buf sigjmp_buf
#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask))
* Checking just with #ifdef might not be enough because this symbol
* has been known to be an enum.
*/
-#$d_socket HAS_SOCKET /**/
-#$d_sockpair HAS_SOCKETPAIR /**/
-#$d_msg_ctrunc HAS_MSG_CTRUNC /**/
-#$d_msg_dontroute HAS_MSG_DONTROUTE /**/
-#$d_msg_oob HAS_MSG_OOB /**/
-#$d_msg_peek HAS_MSG_PEEK /**/
-#$d_msg_proxy HAS_MSG_PROXY /**/
-#$d_scm_rights HAS_SCM_RIGHTS /**/
+#define HAS_SOCKET /**/
+/*#define HAS_SOCKETPAIR /**/
+/*#define HAS_MSG_CTRUNC /**/
+/*#define HAS_MSG_DONTROUTE /**/
+/*#define HAS_MSG_OOB /**/
+/*#define HAS_MSG_PEEK /**/
+/*#define HAS_MSG_PROXY /**/
+/*#define HAS_SCM_RIGHTS /**/
/* HAS_SOCKS5_INIT:
* This symbol, if defined, indicates that the socks5_init routine is
* available to initialize SOCKS 5.
*/
-#$d_socks5_init HAS_SOCKS5_INIT /**/
+/*#define HAS_SOCKS5_INIT /**/
/* HAS_SQRTL:
* This symbol, if defined, indicates that the sqrtl routine is
* available to do long double square roots.
*/
-#$d_sqrtl HAS_SQRTL /**/
+/*#define HAS_SQRTL /**/
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
*/
#ifndef USE_STAT_BLOCKS
-#$d_statblks USE_STAT_BLOCKS /**/
+/*#define USE_STAT_BLOCKS /**/
#endif
/* HAS_STRUCT_STATFS_F_FLAGS:
* have statfs() and struct statfs, they have ustat() and getmnt()
* with struct ustat and struct fs_data.
*/
-#$d_statfs_f_flags HAS_STRUCT_STATFS_F_FLAGS /**/
+/*#define HAS_STRUCT_STATFS_F_FLAGS /**/
/* HAS_STRUCT_STATFS:
* This symbol, if defined, indicates that the struct statfs
* to do statfs() is supported.
*/
-#$d_statfs_s HAS_STRUCT_STATFS /**/
+/*#define HAS_STRUCT_STATFS /**/
/* HAS_FSTATVFS:
* This symbol, if defined, indicates that the fstatvfs routine is
* available to stat filesystems by file descriptors.
*/
-#$d_fstatvfs HAS_FSTATVFS /**/
+/*#define HAS_FSTATVFS /**/
/* USE_STDIO_PTR:
* This symbol is defined if the _ptr and _cnt fields (or similar)
* This symbol is defined if the FILE_cnt macro can be used as an
* lvalue.
*/
-#$d_stdstdio USE_STDIO_PTR /**/
+/* STDIO_PTR_LVAL_SETS_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n has the side effect of decreasing the
+ * value of File_cnt(fp) by n.
+ */
+/* STDIO_PTR_LVAL_NOCHANGE_CNT:
+ * This symbol is defined if using the FILE_ptr macro as an lvalue
+ * to increase the pointer by n leaves File_cnt(fp) unchanged.
+ */
+#define USE_STDIO_PTR /**/
#ifdef USE_STDIO_PTR
-#define FILE_ptr(fp) $stdio_ptr
-#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/
-#define FILE_cnt(fp) $stdio_cnt
-#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/
+#define FILE_ptr(fp) ((fp)->_ptr)
+#define STDIO_PTR_LVALUE /**/
+#define FILE_cnt(fp) ((fp)->_cnt)
+#define STDIO_CNT_LVALUE /**/
+/*#define STDIO_PTR_LVAL_SETS_CNT /**/
+/*#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/
#endif
/* USE_STDIO_BASE:
* structure pointed to its argument. This macro will always be defined
* if USE_STDIO_BASE is defined.
*/
-#$d_stdiobase USE_STDIO_BASE /**/
+#define USE_STDIO_BASE /**/
#ifdef USE_STDIO_BASE
-#define FILE_base(fp) $stdio_base
-#define FILE_bufsiz(fp) $stdio_bufsiz
+#define FILE_base(fp) ((fp)->_base)
+#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base)
#endif
/* HAS_STRERROR:
* not available to translate error numbers to strings but sys_errlist[]
* array is there.
*/
-#$d_strerror HAS_STRERROR /**/
-#$d_syserrlst HAS_SYS_ERRLIST /**/
-#define Strerror(e) $d_strerrm
+#define HAS_STRERROR /**/
+#define HAS_SYS_ERRLIST /**/
+#define Strerror(e) strerror(e)
/* HAS_STRTOLD:
* This symbol, if defined, indicates that the strtold routine is
* available to convert strings to long doubles.
*/
-#$d_strtold HAS_STRTOLD /**/
+/*#define HAS_STRTOLD /**/
/* HAS_STRTOLL:
* This symbol, if defined, indicates that the strtoll routine is
* available to convert strings to long longs.
*/
-#$d_strtoll HAS_STRTOLL /**/
+/*#define HAS_STRTOLL /**/
/* HAS_STRTOULL:
* This symbol, if defined, indicates that the strtoull routine is
* available to convert strings to unsigned long longs.
*/
-#$d_strtoull HAS_STRTOULL /**/
+/*#define HAS_STRTOULL /**/
/* HAS_STRTOUQ:
* This symbol, if defined, indicates that the strtouq routine is
* available to convert strings to unsigned long longs (quads).
*/
-#$d_strtouq HAS_STRTOUQ /**/
+/*#define HAS_STRTOUQ /**/
/* HAS_TELLDIR_PROTO:
* This symbol, if defined, indicates that the system provides
* to the program to supply one. A good guess is
* extern long telldir _((DIR*));
*/
-#$d_telldirproto HAS_TELLDIR_PROTO /**/
+/*#define HAS_TELLDIR_PROTO /**/
/* Time_t:
* This symbol holds the type returned by time(). It can be long,
* or time_t on BSD sites (in which case <sys/types.h> should be
* included).
*/
-#define Time_t $timetype /* Time type */
+#define Time_t time_t /* Time type */
/* HAS_TIMES:
* This symbol, if defined, indicates that the times() routine exists.
* Note that this became obsolete on some systems (SUNOS), which now
* use getrusage(). It may be necessary to include <sys/times.h>.
*/
-#$d_times HAS_TIMES /**/
+#define HAS_TIMES /**/
/* HAS_UNION_SEMUN:
* This symbol, if defined, indicates that the union semun is
* This symbol, if defined, indicates that struct semid_ds * is
* used for semctl IPC_STAT.
*/
-#$d_union_semun HAS_UNION_SEMUN /**/
-#$d_semctl_semun USE_SEMCTL_SEMUN /**/
-#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/
+/*#define HAS_UNION_SEMUN /**/
+/*#define USE_SEMCTL_SEMUN /**/
+/*#define USE_SEMCTL_SEMID_DS /**/
/* HAS_USTAT:
* This symbol, if defined, indicates that the ustat system call is
* available to query file system statistics by dev_t.
*/
-#$d_ustat HAS_USTAT /**/
+/*#define HAS_USTAT /**/
/* HAS_VFORK:
* This symbol, if defined, indicates that vfork() exists.
*/
-#$d_vfork HAS_VFORK /**/
+/*#define HAS_VFORK /**/
/* Signal_t:
* This symbol's value is either "void" or "int", corresponding to the
* a signal handler using "Signal_t (*handler)()", and define the
* handler using "Signal_t handler(sig)".
*/
-#define Signal_t $signal_t /* Signal handler's return type */
+#define Signal_t void /* Signal handler's return type */
/* HAS_VPRINTF:
* This symbol, if defined, indicates that the vprintf routine is available
* is up to the package author to declare vsprintf correctly based on the
* symbol.
*/
-#$d_vprintf HAS_VPRINTF /**/
-#$d_charvspr USE_CHAR_VSPRINTF /**/
+#define HAS_VPRINTF /**/
+/*#define USE_CHAR_VSPRINTF /**/
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
*/
-#$usedl USE_DYNAMIC_LOADING /**/
+/*#define USE_DYNAMIC_LOADING /**/
/* DOUBLESIZE:
* This symbol contains the size of a double, so that the C preprocessor
* can make decisions based on it.
*/
-#define DOUBLESIZE $doublesize /**/
+#define DOUBLESIZE 8 /**/
/* EBCDIC:
* This symbol, if defined, indicates that this system uses
* EBCDIC encoding.
*/
-#$ebcdic EBCDIC /**/
+/*#define EBCDIC /**/
/* FFLUSH_NULL:
* This symbol, if defined, tells that fflush(NULL) does flush
* Note that if fflushNULL is defined, fflushall will not
* even be probed for and will be left undefined.
*/
-#$fflushNULL FFLUSH_NULL /**/
-#$fflushall FFLUSH_ALL /**/
+#define FFLUSH_NULL /**/
+/*#define FFLUSH_ALL /**/
/* Fpos_t:
* This symbol holds the type used to declare file positions in libc.
* It can be fpos_t, long, uint, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
-#define Fpos_t $fpostype /* File position type */
+#define Fpos_t fpos_t /* File position type */
/* Gid_t_f:
* This symbol defines the format string used for printing a Gid_t.
*/
-#define Gid_t_f $gidformat /**/
+#define Gid_t_f "d" /**/
/* Gid_t_sign:
* This symbol holds the signedess of a Gid_t.
* 1 for unsigned, -1 for signed.
*/
-#define Gid_t_sign $gidsign /* GID sign */
+#define Gid_t_sign -1 /* GID sign */
/* Gid_t_size:
* This symbol holds the size of a Gid_t in bytes.
*/
-#define Gid_t_size $gidsize /* GID size */
+#define Gid_t_size 4 /* GID size */
/* Gid_t:
* This symbol holds the return type of getgid() and the type of
* gid_t, etc... It may be necessary to include <sys/types.h> to get
* any typedef'ed information.
*/
-#define Gid_t $gidtype /* Type for getgid(), etc... */
+#define Gid_t gid_t /* Type for getgid(), etc... */
/* Groups_t:
* This symbol holds the type used for the second argument to
* getgroups() or setgroups()..
*/
#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS)
-#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */
+#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */
#endif
/* DB_Prefix_t:
* in the <db.h> header file. In older versions of DB, it was
* int, while in newer ones it is size_t.
*/
-#define DB_Hash_t $db_hashtype /**/
-#define DB_Prefix_t $db_prefixtype /**/
+#define DB_Hash_t int /**/
+#define DB_Prefix_t int /**/
/* I_GRP:
* This symbol, if defined, indicates to the C program that it should
* This symbol, if defined, indicates to the C program that struct group
* in <grp.h> contains gr_passwd.
*/
-#$i_grp I_GRP /**/
-#$d_grpasswd GRPASSWD /**/
+#define I_GRP /**/
+/*#define GRPASSWD /**/
/* I_ICONV:
* This symbol, if defined, indicates that <iconv.h> exists and
* should be included.
*/
-#$i_iconv I_ICONV /**/
+/*#define I_ICONV /**/
/* I_IEEEFP:
* This symbol, if defined, indicates that <ieeefp.h> exists and
* should be included.
*/
-#$i_ieeefp I_IEEEFP /**/
+/*#define I_IEEEFP /**/
/* I_INTTYPES:
* This symbol, if defined, indicates to the C program that it should
* include <inttypes.h>.
*/
-#$i_inttypes I_INTTYPES /**/
+/*#define I_INTTYPES /**/
/* I_LIBUTIL:
* This symbol, if defined, indicates that <libutil.h> exists and
* should be included.
*/
-#$i_libutil I_LIBUTIL /**/
+/*#define I_LIBUTIL /**/
/* I_MACH_CTHREADS:
* This symbol, if defined, indicates to the C program that it should
* include <mach/cthreads.h>.
*/
-#$i_machcthr I_MACH_CTHREADS /**/
+/*#define I_MACH_CTHREADS /**/
/* I_MNTENT:
* This symbol, if defined, indicates that <mntent.h> exists and
* should be included.
*/
-#$i_mntent I_MNTENT /**/
+/*#define I_MNTENT /**/
/* I_NETDB:
* This symbol, if defined, indicates that <netdb.h> exists and
* should be included.
*/
-#$i_netdb I_NETDB /**/
+#define I_NETDB /**/
/* I_NETINET_TCP:
* This symbol, if defined, indicates to the C program that it should
* include <netinet/tcp.h>.
*/
-#$i_netinettcp I_NETINET_TCP /**/
+#define I_NETINET_TCP /**/
/* I_POLL:
* This symbol, if defined, indicates that <poll.h> exists and
* should be included.
*/
-#$i_poll I_POLL /**/
+/*#define I_POLL /**/
/* I_PROT:
* This symbol, if defined, indicates that <prot.h> exists and
* should be included.
*/
-#$i_prot I_PROT /**/
+/*#define I_PROT /**/
/* I_PTHREAD:
* This symbol, if defined, indicates to the C program that it should
* include <pthread.h>.
*/
-#$i_pthread I_PTHREAD /**/
+/*#define I_PTHREAD /**/
/* I_PWD:
* This symbol, if defined, indicates to the C program that it should
* This symbol, if defined, indicates to the C program that struct passwd
* contains pw_passwd.
*/
-#$i_pwd I_PWD /**/
-#$d_pwquota PWQUOTA /**/
-#$d_pwage PWAGE /**/
-#$d_pwchange PWCHANGE /**/
-#$d_pwclass PWCLASS /**/
-#$d_pwexpire PWEXPIRE /**/
-#$d_pwcomment PWCOMMENT /**/
-#$d_pwgecos PWGECOS /**/
-#$d_pwpasswd PWPASSWD /**/
+#define I_PWD /**/
+/*#define PWQUOTA /**/
+/*#define PWAGE /**/
+/*#define PWCHANGE /**/
+/*#define PWCLASS /**/
+/*#define PWEXPIRE /**/
+/*#define PWCOMMENT /**/
+/*#define PWGECOS /**/
+/*#define PWPASSWD /**/
/* I_SHADOW:
* This symbol, if defined, indicates that <shadow.h> exists and
* should be included.
*/
-#$i_shadow I_SHADOW /**/
+/*#define I_SHADOW /**/
/* I_SOCKS:
* This symbol, if defined, indicates that <socks.h> exists and
* should be included.
*/
-#$i_socks I_SOCKS /**/
+/*#define I_SOCKS /**/
/* I_SUNMATH:
* This symbol, if defined, indicates that <sunmath.h> exists and
* should be included.
*/
-#$i_sunmath I_SUNMATH /**/
+/*#define I_SUNMATH /**/
/* I_SYSLOG:
* This symbol, if defined, indicates that <syslog.h> exists and
* should be included.
*/
-#$i_syslog I_SYSLOG /**/
+/*#define I_SYSLOG /**/
/* I_SYSMODE:
* This symbol, if defined, indicates that <sys/mode.h> exists and
* should be included.
*/
-#$i_sysmode I_SYSMODE /**/
+/*#define I_SYSMODE /**/
/* I_SYS_MOUNT:
* This symbol, if defined, indicates that <sys/mount.h> exists and
* should be included.
*/
-#$i_sysmount I_SYS_MOUNT /**/
+/*#define I_SYS_MOUNT /**/
/* I_SYS_STATFS:
* This symbol, if defined, indicates that <sys/statfs.h> exists.
*/
-#$i_sysstatfs I_SYS_STATFS /**/
+/*#define I_SYS_STATFS /**/
/* I_SYS_STATVFS:
* This symbol, if defined, indicates that <sys/statvfs.h> exists and
* should be included.
*/
-#$i_sysstatvfs I_SYS_STATVFS /**/
+/*#define I_SYS_STATVFS /**/
/* I_SYSUIO:
* This symbol, if defined, indicates that <sys/uio.h> exists and
* should be included.
*/
-#$i_sysuio I_SYSUIO /**/
+/*#define I_SYSUIO /**/
/* I_SYSUTSNAME:
* This symbol, if defined, indicates that <sys/utsname.h> exists and
* should be included.
*/
-#$i_sysutsname I_SYSUTSNAME /**/
+#define I_SYSUTSNAME /**/
/* I_SYS_VFS:
* This symbol, if defined, indicates that <sys/vfs.h> exists and
* should be included.
*/
-#$i_sysvfs I_SYS_VFS /**/
+/*#define I_SYS_VFS /**/
/* I_TIME:
* This symbol, if defined, indicates to the C program that it should
* This symbol, if defined, indicates to the C program that it should
* include <sys/time.h> with KERNEL defined.
*/
-#$i_time I_TIME /**/
-#$i_systime I_SYS_TIME /**/
-#$i_systimek I_SYS_TIME_KERNEL /**/
+/*#define I_TIME /**/
+#define I_SYS_TIME /**/
+/*#define I_SYS_TIME_KERNEL /**/
/* I_USTAT:
* This symbol, if defined, indicates that <ustat.h> exists and
* should be included.
*/
-#$i_ustat I_USTAT /**/
+/*#define I_USTAT /**/
/* PERL_INC_VERSION_LIST:
* This variable specifies the list of subdirectories in over
* for a C initialization string. See the inc_version_list entry
* in Porting/Glossary for more details.
*/
-#define PERL_INC_VERSION_LIST $inc_version_list_init /**/
+#define PERL_INC_VERSION_LIST 0 /**/
/* INSTALL_USR_BIN_PERL:
* This symbol, if defined, indicates that Perl is to be installed
* also as /usr/bin/perl.
*/
-#$installusrbinperl INSTALL_USR_BIN_PERL /**/
+/*#define INSTALL_USR_BIN_PERL /**/
/* PERL_PRIfldbl:
* This symbol, if defined, contains the string used by stdio to
* This symbol, if defined, contains the string used by stdio to
* format long doubles (format 'f') for input.
*/
-#$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/
-#$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/
-#$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/
-#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/
+#define PERL_PRIfldbl "Lf" /**/
+#define PERL_PRIgldbl "Lg" /**/
+#define PERL_PRIeldbl "Le" /**/
+#define PERL_SCNfldbl "Lf" /**/
/* Off_t:
* This symbol holds the type used to declare offsets in the kernel.
/* Off_t_size:
* This symbol holds the number of bytes used by the Off_t.
*/
-#define Off_t $lseektype /* <offset> type */
-#define LSEEKSIZE $lseeksize /* <offset> size */
-#define Off_t_size $lseeksize /* <offset> size */
+#define Off_t off_t /* <offset> type */
+#define LSEEKSIZE 4 /* <offset> size */
+#define Off_t_size 4 /* <offset> size */
/* Free_t:
* This variable contains the return type of free(). It is usually
/* Malloc_t:
* This symbol is the type of pointer returned by malloc and realloc.
*/
-#define Malloc_t $malloctype /**/
-#define Free_t $freetype /**/
+#define Malloc_t void * /**/
+#define Free_t void /**/
/* MYMALLOC:
* This symbol, if defined, indicates that we're using our own malloc.
*/
-#$d_mymalloc MYMALLOC /**/
+/*#define MYMALLOC /**/
/* Mode_t:
* This symbol holds the type used to declare file modes
* int or unsigned short. It may be necessary to include <sys/types.h>
* to get any typedef'ed information.
*/
-#define Mode_t $modetype /* file mode parameter for system calls */
+#define Mode_t mode_t /* file mode parameter for system calls */
/* VAL_O_NONBLOCK:
* This symbol is to be used during open() or fcntl(F_SETFL) to turn on
* a non-blocking file descriptor will return 0 on EOF, and not the value
* held in RD_NODATA (-1 usually, in that case!).
*/
-#define VAL_O_NONBLOCK $o_nonblock
-#define VAL_EAGAIN $eagain
-#define RD_NODATA $rd_nodata
-#$d_eofnblk EOF_NONBLOCK
+#define VAL_O_NONBLOCK O_NONBLOCK
+#define VAL_EAGAIN EAGAIN
+#define RD_NODATA -1
+#define EOF_NONBLOCK
/* Netdb_host_t:
* This symbol holds the type used for the 1st argument
* This symbol holds the type used for the 1st argument to
* getnetbyaddr().
*/
-#define Netdb_host_t $netdb_host_type /**/
-#define Netdb_hlen_t $netdb_hlen_type /**/
-#define Netdb_name_t $netdb_name_type /**/
-#define Netdb_net_t $netdb_net_type /**/
+#define Netdb_host_t char * /**/
+#define Netdb_hlen_t int /**/
+#define Netdb_name_t char * /**/
+#define Netdb_net_t long /**/
/* PERL_OTHERLIBDIRS:
* This variable contains a colon-separated set of paths for the perl
* and architecture-specific directories. See PERL_INC_VERSION_LIST
* for more details.
*/
-#$d_perl_otherlibdirs PERL_OTHERLIBDIRS "$otherlibdirs" /**/
+/*#define PERL_OTHERLIBDIRS "" /**/
/* IVTYPE:
* This symbol defines the C type used for Perl's IV.
* This symbol contains the number of bits a variable of type NVTYPE
* can preserve of a variable of type UVTYPE.
*/
-#define IVTYPE $ivtype /**/
-#define UVTYPE $uvtype /**/
-#define I8TYPE $i8type /**/
-#define U8TYPE $u8type /**/
-#define I16TYPE $i16type /**/
-#define U16TYPE $u16type /**/
-#define I32TYPE $i32type /**/
-#define U32TYPE $u32type /**/
+#define IVTYPE int /**/
+#define UVTYPE unsigned int /**/
+#define I8TYPE char /**/
+#define U8TYPE unsigned char /**/
+#define I16TYPE short /**/
+#define U16TYPE unsigned short /**/
+#define I32TYPE int /**/
+#define U32TYPE unsigned int /**/
#ifdef HAS_QUAD
-#define I64TYPE $i64type /**/
-#define U64TYPE $u64type /**/
+#define I64TYPE _error_ /**/
+#define U64TYPE _error_ /**/
#endif
-#define NVTYPE $nvtype /**/
-#define IVSIZE $ivsize /**/
-#define UVSIZE $uvsize /**/
-#define I8SIZE $i8size /**/
-#define U8SIZE $u8size /**/
-#define I16SIZE $i16size /**/
-#define U16SIZE $u16size /**/
-#define I32SIZE $i32size /**/
-#define U32SIZE $u32size /**/
+#define NVTYPE double /**/
+#define IVSIZE 4 /**/
+#define UVSIZE 4 /**/
+#define I8SIZE 1 /**/
+#define U8SIZE 1 /**/
+#define I16SIZE 2 /**/
+#define U16SIZE 2 /**/
+#define I32SIZE 4 /**/
+#define U32SIZE 4 /**/
#ifdef HAS_QUAD
-#define I64SIZE $i64size /**/
-#define U64SIZE $u64size /**/
+#define I64SIZE _error_ /**/
+#define U64SIZE _error_ /**/
#endif
-#define NVSIZE $nvsize /**/
-#$d_nv_preserves_uv NV_PRESERVES_UV
-#define NV_PRESERVES_UV_BITS $d_nv_preserves_uv_bits
+#define NVSIZE 8 /**/
+#define NV_PRESERVES_UV
+#define NV_PRESERVES_UV_BITS 32
/* IVdf:
* This symbol defines the format string used for printing a Perl IV
* This symbol defines the format string used for printing a Perl NV
* using %g-ish floating point format.
*/
-#define IVdf $ivdformat /**/
-#define UVuf $uvuformat /**/
-#define UVof $uvoformat /**/
-#define UVxf $uvxformat /**/
-#define NVef $nveformat /**/
-#define NVff $nvfformat /**/
-#define NVgf $nvgformat /**/
+#define IVdf "d" /**/
+#define UVuf "u" /**/
+#define UVof "o" /**/
+#define UVxf "x" /**/
+#define NVef "e" /**/
+#define NVff "f" /**/
+#define NVgf "g" /**/
/* Pid_t:
* This symbol holds the type used to declare process ids in the kernel.
* It can be int, uint, pid_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
-#define Pid_t $pidtype /* PID type */
+#define Pid_t pid_t /* PID type */
/* PRIVLIB:
* This symbol contains the name of the private library for this package.
* This symbol contains the ~name expanded version of PRIVLIB, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define PRIVLIB "$privlib" /**/
-#define PRIVLIB_EXP "$privlibexp" /**/
+#define PRIVLIB "/system/ported/perl/lib/5.7" /**/
+#define PRIVLIB_EXP "/system/ported/perl/lib/5.7" /**/
/* PTRSIZE:
* This symbol contains the size of a pointer, so that the C preprocessor
* the compiler supports (void *); otherwise it will be
* sizeof(char *).
*/
-#define PTRSIZE $ptrsize /**/
+#define PTRSIZE 4 /**/
/* Drand01:
* This macro is to be used to generate uniformly distributed
* function used to generate normalized random numbers.
* Values include 15, 16, 31, and 48.
*/
-#define Drand01() $drand01 /**/
-#define Rand_seed_t $randseedtype /**/
-#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/
-#define RANDBITS $randbits /**/
+#define Drand01() rand()/(RAND_MAX+1) /**/
+#define Rand_seed_t unsigned int /**/
+#define seedDrand01(x) srand((Rand_seed_t)x) /**/
+#define RANDBITS 15 /**/
/* SELECT_MIN_BITS:
* This symbol holds the minimum number of bits operated by select.
* is either n or 32*ceil(n/32), especially many little-endians do
* the latter. This is only useful if you have select(), naturally.
*/
-#define SELECT_MIN_BITS $selectminbits /**/
+#define SELECT_MIN_BITS 1 /**/
/* Select_fd_set_t:
* This symbol holds the type used for the 2nd, 3rd, and 4th
* is defined, and 'int *' otherwise. This is only useful if you
* have select(), of course.
*/
-#define Select_fd_set_t $selecttype /**/
+#define Select_fd_set_t fd_set * /**/
/* SIG_NAME:
* This symbol contains a list of signal names in order of
* The last element is 0, corresponding to the 0 at the end of
* the sig_name list.
*/
-#define SIG_NAME $sig_name_init /**/
-#define SIG_NUM $sig_num_init /**/
+#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","CHLD","CONT","KILL","STOP","PIPE","QUIT","BUS","TRAP","TSTP","TTIN","TTOU","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0 /**/
+#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,0 /**/
/* SITEARCH:
* This symbol contains the name of the private library for this package.
* This symbol contains the ~name expanded version of SITEARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#define SITEARCH "$sitearch" /**/
-#define SITEARCH_EXP "$sitearchexp" /**/
+/*#define SITEARCH "" /**/
+/*#define SITEARCH_EXP "" /**/
/* SITELIB:
* This symbol contains the name of the private library for this package.
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
-#define SITELIB "$sitelib" /**/
-#define SITELIB_EXP "$sitelibexp" /**/
-#define SITELIB_STEM "$sitelib_stem" /**/
+#define SITELIB "/system/ported/perl/lib/site/5.7" /**/
+#define SITELIB_EXP "/system/ported/perl/lib/site/5.7" /**/
+#define SITELIB_STEM "/system/ported/perl/lib/site" /**/
/* Size_t_size:
* This symbol holds the size of a Size_t in bytes.
*/
-#define Size_t_size $sizesize /* */
+#define Size_t_size 4 /* */
/* Size_t:
* This symbol holds the type used to declare length parameters
* unsigned long, int, etc. It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
-#define Size_t $sizetype /* length paramater for string functions */
+#define Size_t size_t /* length paramater for string functions */
/* Sock_size_t:
* This symbol holds the type used for the size argument of
* various socket calls (just the base type, not the pointer-to).
*/
-#define Sock_size_t $socksizetype /**/
+#define Sock_size_t int /**/
/* SSize_t:
* This symbol holds the type used by functions that return
* to get any typedef'ed information.
* We will pick a type such that sizeof(SSize_t) == sizeof(Size_t).
*/
-#define SSize_t $ssizetype /* signed count of bytes */
+#define SSize_t ssize_t /* signed count of bytes */
/* STARTPERL:
* This variable contains the string to put in front of a perl
* script to make sure (one hopes) that it runs with perl and not
* some shell.
*/
-#define STARTPERL "$startperl" /**/
+#define STARTPERL "!perl.pm" /**/
/* HAS_STDIO_STREAM_ARRAY:
* This symbol, if defined, tells that there is an array
* This symbol tells the name of the array holding the stdio streams.
* Usual values include _iob, __iob, and __sF.
*/
-#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/
-#define STDIO_STREAM_ARRAY $stdio_stream_array
+#define HAS_STDIO_STREAM_ARRAY /**/
+#define STDIO_STREAM_ARRAY _iob
/* Uid_t_f:
* This symbol defines the format string used for printing a Uid_t.
*/
-#define Uid_t_f $uidformat /**/
+#define Uid_t_f "d" /**/
/* Uid_t_sign:
* This symbol holds the signedess of a Uid_t.
* 1 for unsigned, -1 for signed.
*/
-#define Uid_t_sign $uidsign /* UID sign */
+#define Uid_t_sign -1 /* UID sign */
/* Uid_t_size:
* This symbol holds the size of a Uid_t in bytes.
*/
-#define Uid_t_size $uidsize /* UID size */
+#define Uid_t_size 4 /* UID size */
/* Uid_t:
* This symbol holds the type used to declare user ids in the kernel.
* It can be int, ushort, uid_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
-#define Uid_t $uidtype /* UID type */
+#define Uid_t uid_t /* UID type */
/* USE_64_BIT_INT:
* This symbol, if defined, indicates that 64-bit integers should
* you may need at least to reboot your OS to 64-bit mode.
*/
#ifndef USE_64_BIT_INT
-#$use64bitint USE_64_BIT_INT /**/
+/*#define USE_64_BIT_INT /**/
#endif
#ifndef USE_64_BIT_ALL
-#$use64bitall USE_64_BIT_ALL /**/
+/*#define USE_64_BIT_ALL /**/
#endif
/* USE_LARGE_FILES:
* should be used when available.
*/
#ifndef USE_LARGE_FILES
-#$uselargefiles USE_LARGE_FILES /**/
+/*#define USE_LARGE_FILES /**/
#endif
/* USE_LONG_DOUBLE:
* be used when available.
*/
#ifndef USE_LONG_DOUBLE
-#$uselongdouble USE_LONG_DOUBLE /**/
+#define USE_LONG_DOUBLE /**/
#endif
/* USE_MORE_BITS:
* long doubles should be used when available.
*/
#ifndef USE_MORE_BITS
-#$usemorebits USE_MORE_BITS /**/
+/*#define USE_MORE_BITS /**/
#endif
/* MULTIPLICITY:
* be built to use multiplicity.
*/
#ifndef MULTIPLICITY
-#$usemultiplicity MULTIPLICITY /**/
+/*#define MULTIPLICITY /**/
#endif
/* USE_PERLIO:
* used in a fully backward compatible manner.
*/
#ifndef USE_PERLIO
-#$useperlio USE_PERLIO /**/
+/*#define USE_PERLIO /**/
#endif
/* USE_SOCKS:
* be built to use socks.
*/
#ifndef USE_SOCKS
-#$usesocks USE_SOCKS /**/
+/*#define USE_SOCKS /**/
#endif
/* USE_ITHREADS:
* This symbol, if defined, indicates that Perl should
* be built to use the old draft POSIX threads API.
*/
-#$use5005threads USE_5005THREADS /**/
-#$useithreads USE_ITHREADS /**/
+/*#define USE_5005THREADS /**/
+/*#define USE_ITHREADS /**/
#if defined(USE_5005THREADS) && !defined(USE_ITHREADS)
#define USE_THREADS /* until src is revised*/
#endif
-#$d_oldpthreads OLD_PTHREADS_API /**/
+/*#define OLD_PTHREADS_API /**/
/* PERL_VENDORARCH:
* If defined, this symbol contains the name of a private library.
* This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used
* in programs that are not prepared to deal with ~ expansion at run-time.
*/
-#$d_vendorarch PERL_VENDORARCH "$vendorarch" /**/
-#$d_vendorarch PERL_VENDORARCH_EXP "$vendorarchexp" /**/
+#define PERL_VENDORARCH "" /**/
+#define PERL_VENDORARCH_EXP "" /**/
/* PERL_VENDORLIB_EXP:
* This symbol contains the ~name expanded version of VENDORLIB, to be used
* removed. The elements in inc_version_list (inc_version_list.U) can
* be tacked onto this variable to generate a list of directories to search.
*/
-#$d_vendorlib PERL_VENDORLIB_EXP "$vendorlibexp" /**/
-#$d_vendorlib PERL_VENDORLIB_STEM "$vendorlib_stem" /**/
+#define PERL_VENDORLIB_EXP "" /**/
+#define PERL_VENDORLIB_STEM "" /**/
/* VOIDFLAGS:
* This symbol indicates how much support of the void type is given by this
* level of void support necessary is not present, defines void to int.
*/
#ifndef VOIDUSED
-#define VOIDUSED $defvoidused
+#define VOIDUSED 15
#endif
-#define VOIDFLAGS $voidflags
+#define VOIDFLAGS 15
#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
#define void int /* is void to be avoided? */
#define M_VOID /* Xenix strikes again */
/* PERL_XS_APIVERSION:
* This variable contains the version of the oldest perl binary
* compatible with the present perl. perl.c:incpush() and
- * lib/lib.pm will automatically search in $sitearch for older
+ * lib/lib.pm will automatically search in for older
* directories across major versions back to xs_apiversion.
* This is only useful if you have a perl library directory tree
* structured like the default one.
* compatible with the present perl. (That is, pure perl modules
* written for pm_apiversion will still work for the current
* version). perl.c:incpush() and lib/lib.pm will automatically
- * search in $sitelib for older directories across major versions
+ * search in /system/ported/perl/lib/site/5.7 for older directories across major versions
* back to pm_apiversion. This is only useful if you have a perl
* library directory tree structured like the default one. The
* versioned site_perl library was introduced in 5.005, so that's
* (presumably) be similar.
* See the INSTALL file for how this works.
*/
-#define PERL_XS_APIVERSION "$xs_apiversion"
-#define PERL_PM_APIVERSION "$pm_apiversion"
+#define PERL_XS_APIVERSION "5.00563"
+#define PERL_PM_APIVERSION "5.005"
/* HAS_GETPGRP:
* This symbol, if defined, indicates that the getpgrp routine is
* This symbol, if defined, indicates that getpgrp needs one
* arguments whereas USG one needs none.
*/
-#$d_getpgrp HAS_GETPGRP /**/
-#$d_bsdgetpgrp USE_BSD_GETPGRP /**/
+#define HAS_GETPGRP /**/
+/*#define USE_BSD_GETPGRP /**/
/* HAS_SETPGRP:
* This symbol, if defined, indicates that the setpgrp routine is
* arguments whereas USG one needs none. See also HAS_SETPGID
* for a POSIX interface.
*/
-#$d_setpgrp HAS_SETPGRP /**/
-#$d_bsdsetpgrp USE_BSD_SETPGRP /**/
+/*#define HAS_SETPGRP /**/
+/*#define USE_BSD_SETPGRP /**/
+
+/* NEED_VA_COPY:
+ * This symbol, if defined, indicates that the system stores
+ * the variable argument list datatype, va_list, in a format
+ * that cannot be copied by simple assignment, so that some
+ * other means must be used when copying is required.
+ * As such systems vary in their provision (or non-provision)
+ * of copying mechanisms, handy.h defines a platform-
+ * independent macro, Perl_va_copy(src, dst), to do the job.
+ */
+/*#define NEED_VA_COPY / **/
#endif
-!GROK!THIS!
projects / p5sagit/p5-mst-13.2.git / blobdiff