* GenConfig.pl when producing Config.pm.
*
* config.h for VMS
+ * Version: 5.003_08
*/
-/* Configuration time: 12-Oct-1994 17:00
+/* Configuration time: 19-Nov-1996 23:34
* Configured by: Charles Bailey bailey@genetics.upenn.edu
* Target system: VMS
*/
#ifndef _config_h_
#define _config_h_
+/* CAT2:
+ * This macro catenates 2 tokens together.
+ */
+/* STRINGIFY:
+ * This macro surrounds its token with double quotes.
+ */
+#ifdef __STDC__
+#define CAT2(a,b)a ## b
+#define CAT3(a,b,c)a ## b ## c
+#define CAT4(a,b,c,d)a ## b ## c ##d
+#define CAT5(a,b,c,d,e)a ## b ## c ## d ## e
+#define StGiFy(a) # a
+#define STRINGIFY(A)StGiFy(a)
+#define SCAT2(a,b)StGiFy(a) StGiFy(b)
+#define SCAT3(a,b,c)StGiFy(a) StGiFy(b) StGiFy(c)
+#define SCAT4(a,b,c,d)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d)
+#define SCAT5(a,b,c,d,e)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) StGiFy(e)
+#else
+#define CAT2(a,b)a/**/b
+#define CAT3(a,b,c)a/**/b/**/c
+#define CAT4(a,b,c,d)a/**/b/**/c/**/d
+#define CAT5(a,b,c,d,e)a/**/b/**/c/**/d/**/e
+#define STRINGIFY(a)"a"
+#endif
+
+/* config-start */
+
/* MEM_ALIGNBYTES:
* This symbol contains the number of bytes required to align a
* double. Usual values are 2, 4 and 8.
*/
#define MEM_ALIGNBYTES 8 /**/
-/* BYTEORDER:
- * This symbol hold the hexadecimal constant defined in byteorder,
- * i.e. 0x1234 or 0x4321, etc...
+/* OSNAME:
+ * This symbol contains the name of the operating system, as determined
+ * by Configure.
*/
-#define BYTEORDER 0x1234 /* large digits for MSB */
+#define OSNAME "VMS" /**/
/* ARCHLIB:
* This variable, if defined, holds the name of the directory in
* same as PRIVLIB, it is not defined, since presumably the
* program already searches PRIVLIB.
*/
-#undef ARCHLIB /**/
+/* ARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of ARCHLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* ==> NOTE <==
+ * This value is automatically updated by FndVers.Com
+ * when Perl is built. Please do not change it by hand; make
+ * any changes to FndVers.Com instead.
+ */
+#define ARCHLIB_EXP "/perl_root/lib/VMS_VAX/5_00393" /**/
+#define ARCHLIB ARCHLIB_EXP /*config-skip*/
-/* CAT2:
- * This macro catenates 2 tokens together.
+/* ARCHNAME:
+ * This symbol holds a string representing the architecture name.
+ * It may be used to construct an architecture-dependant pathname
+ * where library files may be held under a private library, for
+ * instance.
*/
-/* STRINGIFY:
- * This macro surrounds its token with double quotes.
+#define ARCHNAME "VMS_VAX" /**/
+
+/* BINCOMPAT3:
+ * This symbol, if defined, indicates that Perl 5.004 should be
+ * binary-compatible with Perl 5.003.
*/
-#ifdef __STDC__
-#define CAT2(a,b) a##b /* config-skip */
-#define CAT3(a,b,c) a##b##c /* config-skip */
-#define CAT4(a,b,c,d) a##b##c##d /* config-skip */
-#define CAT5(a,b,c,d,e) a##b##c##d##e /* config-skip */
-#define STRINGIFY(a) #a /* config-skip */
-#else
-#define CAT2(a,b) a/**/b /* config-skip */
-#define CAT3(a,b,c) a/**/b/**/c /* config-skip */
-#define CAT4(a,b,c,d) a/**/b/**/c/**/d /* config-skip */
-#define CAT5(a,b,c,d,e) a/**/b/**/c/**/d/**/e /* config-skip */
-#define STRINGIFY(a) "a" /* config-skip */
-#endif
+#undef BINCOMPAT3
/* CPPSTDIN:
* This symbol contains the first part of the string which will invoke
*/
#undef HAS_BCMP /**/
+#include <string.h> /* Check whether new DECC has #defined bcopy and bzero */
/* HAS_BCOPY:
* This symbol is defined if the bcopy() routine is available to
* copy blocks of memory.
*/
#undef HAS_BCOPY /**/
+#ifdef bcopy
+# define HAS_BCOPY /*config-skip*/
+#endif
/* HAS_BZERO:
* This symbol is defined if the bzero() routine is available to
* set a memory block to 0.
*/
#undef HAS_BZERO /**/
+#ifdef bzero
+# define HAS_BZERO /*config-skip*/
+#endif
/* CASTNEGFLOAT:
* This symbol is defined if the C compiler can cast negative
#define CASTNEGFLOAT /**/
#define CASTFLAGS 0 /**/
-/* CHARSPRINTF:
- * This symbol is defined if this system declares "char *sprintf()" in
- * stdio.h. The trend seems to be to declare it as "int sprintf()". It
- * is up to the package author to declare sprintf correctly based on the
- * symbol.
- */
-#undef CHARSPRINTF /**/
-
/* HAS_CHSIZE:
* This symbol, if defined, indicates that the chsize routine is available
* to truncate files. You might need a -lx to get this routine.
* trigger the necessary tests.
*/
#define HASCONST /**/
-#ifndef HASCONST
-#define const
-#endif
/* HAS_CRYPT:
* This symbol, if defined, indicates that the crypt routine is available
* to encrypt passwords and the like.
*/
-#undef HAS_CRYPT /**/
+#define HAS_CRYPT /**/
+
+/* BYTEORDER:
+ * This symbol hold the hexadecimal constant defined in byteorder,
+ * i.e. 0x1234 or 0x4321, etc...
+ */
+#define BYTEORDER 0x1234 /* large digits for MSB */
/* CSH:
* This symbol, if defined, indicates that the C-shell exists.
*/
#define HAS_FSETPOS /**/
+/* HAS_GETTIMEOFDAY:
+ * This symbol, if defined, indicates that the gettimeofday() system
+ * call is available for a sub-second accuracy clock. Usually, the file
+ * <sys/resource.h> needs to be included (see I_SYS_RESOURCE).
+ * The type "Timeval" should be used to refer to "struct timeval".
+ */
+#undef HAS_GETTIMEOFDAY /**/
+#ifdef HAS_GETTIMEOFDAY
+# define Timeval struct timeval /*config-skip*/
+#endif
+
/* HAS_GETGROUPS:
* This symbol, if defined, indicates that the getgroups() routine is
* available to get the list of process groups. If unavailable, multiple
*/
#undef HAS_UNAME /**/
-/* HAS_GETPGRP:
- * This symbol, if defined, indicates that the getpgrp routine is
- * available to get the current process group.
- */
-#undef HAS_GETPGRP /**/
-
-/* HAS_GETPGRP2:
- * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
- * routine is available to get the current process group.
- */
-#undef HAS_GETPGRP2 /**/
-
/* HAS_GETPRIORITY:
* This symbol, if defined, indicates that the getpriority routine is
* available to get a process's priority.
* This symbol, if defined, indicates that the mbstowcs routine is
* available to covert a multibyte string into a wide character string.
*/
-#undef HAS_MBSTOWCS /**/
+#ifdef __DECC
+# define HAS_MBSTOWCS /*config-skip*/
+#else
+# undef HAS_MBSTOWCS /*config-skip*/
+#endif
/* HAS_MBTOWC:
* This symbol, if defined, indicates that the mbtowc routine is available
* to covert a multibyte to a wide character.
*/
-#undef HAS_MBTOWC /**/
+#ifdef __DECC
+# define HAS_MBTOWC /*config-skip*/
+#else
+# undef HAS_MBTOWC /*config-skip*/
+#endif
/* HAS_MEMCMP:
* This symbol, if defined, indicates that the memcmp routine is available
*/
#define HAS_OPEN3 /**/
+/* HAS_POLL:
+ * This symbol, if defined, indicates that the poll routine is
+ * available to poll active file descriptors.
+ */
+#undef HAS_POLL /**/
+
/* HAS_READDIR:
* This symbol, if defined, indicates that the readdir routine is
* available to read directory entries. You may have to include
*/
#define HAS_RMDIR /**/
-/* HAS_SELECT:
- * This symbol, if defined, indicates that the select routine is
- * available to select active file descriptors. If the timeout field
- * is used, <sys/time.h> may need to be included.
- */
-#undef HAS_SELECT /**/
-
/* HAS_SEM:
* This symbol, if defined, indicates that the entire sem*(2) library is
* supported.
*/
#undef HAS_SETEUID /**/
-/* HAS_SETLOCALE:
- * This symbol, if defined, indicates that the setlocale routine is
- * available to handle locale-specific ctype implementations.
- */
-#undef HAS_SETLOCALE /**/
-
-/* HAS_SETPGID:
- * This symbol, if defined, indicates that the setpgid routine is
- * available to set process group ID.
- */
-#undef HAS_SETPGID /**/
-
-/* HAS_SETPGRP2:
- * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
- * routine is available to set the current process group.
- */
-#undef HAS_SETPGRP2 /**/
/* HAS_SETPRIORITY:
* This symbol, if defined, indicates that the setpriority routine is
* but not always right so it should be emitted by the program only
* when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs.
*/
-#undef Shmat_t char * /**/ /* config-skip */
+#undef Shmat_t /**/ /* config-skip */
#undef HAS_SHMAT_PROTOTYPE /**/
+/* HAS_SIGACTION:
+ * This symbol, if defined, indicates that Vr4's sigaction() routine
+ * is available.
+ */
+#undef HAS_SIGACTION /**/
+
/* USE_STAT_BLOCKS:
* This symbol is defined if this system has a stat structure declaring
* st_blksize and st_blocks.
*/
#undef USE_STAT_BLOCKS /**/
-/* USE_STD_STDIO:
- * This symbol is defined if this system has a FILE structure declaring
- * _ptr and _cnt in stdio.h.
+/* USE_STDIO_PTR:
+ * This symbol is defined if the _ptr and _cnt fields (or similar)
+ * of the stdio FILE structure can be used to access the stdio buffer
+ * for a file handle. If this is defined, then the FILE_ptr(fp)
+ * and FILE_cnt(fp) macros will also be defined and should be used
+ * to access these fields.
+ */
+/* USE_STDIO_BASE:
+ * This symbol is defined if the _base field (or similar) of the
+ * stdio FILE structure can be used to access the stdio buffer for
+ * a file handle. If this is defined, then the FILE_base(fp) macro
+ * will also be defined and should be used to access this field.
+ * Also, the FILE_bufsiz(fp) macro will be defined and should be used
+ * to determine the number of bytes in the buffer. USE_STDIO_BASE
+ * will never be defined unless USE_STDIO_PTR is.
+ */
+/* STDIO_PTR_LVALUE:
+ * This symbol is defined if the FILE_ptr macro can be used as an
+ * lvalue.
+ */
+/* STDIO_CNT_LVALUE:
+ * This symbol is defined if the FILE_cnt macro can be used as an
+ * lvalue.
+ */
+#ifdef __DECC
+# define USE_STDIO_PTR /*config-skip*/
+# define USE_STDIO_BASE /*config-skip*/
+# define STDIO_PTR_LVALUE /*config-skip*/
+# define STDIO_CNT_LVALUE /*config-skip*/
+#else
+# undef USE_STDIO_PTR /*config-skip*/
+# undef USE_STDIO_BASE /*config-skip*/
+# undef STDIO_PTR_LVALUE /*config-skip*/
+# undef STDIO_CNT_LVALUE /*config-skip*/
+#endif
+
+/* FILE_ptr:
+ * This macro is used to access the _ptr field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
+ */
+/* FILE_cnt:
+ * This macro is used to access the _cnt field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_PTR is defined.
*/
-#undef USE_STD_STDIO /**/
+#ifdef USE_STDIO_PTR
+# define FILE_ptr(fp) ((*fp)->_ptr)
+# define FILE_cnt(fp) ((*fp)->_cnt)
+#endif
+
+/* FILE_base:
+ * This macro is used to access the _base field (or equivalent) of the
+ * FILE structure pointed to by its argument. This macro will always be
+ * defined if USE_STDIO_BASE is defined.
+ */
+/* FILE_bufsiz:
+ * This macro is used to determine the number of bytes in the I/O
+ * buffer pointed to by _base field (or equivalent) of the FILE
+ * structure pointed to its argument. This macro will always be defined
+ * if USE_STDIO_BASE is defined.
+ */
+#ifdef USE_STDIO_BASE
+# define FILE_base(fp) ((*fp)->_base)
+# define FILE_bufsiz(fp) ((*fp)->_cnt + (*fp)->_ptr - (*fp)->_base)
+#endif
/* USE_STRUCT_COPY:
* This symbol, if defined, indicates that this C compiler knows how
*/
#define HAS_STRERROR /**/
#undef HAS_SYS_ERRLIST /**/
-#ifdef HAS_STRERROR
-# define Strerror(e) strerror((e),vaxc$errno)
-#else
-#define Strerror(e) ((e)<0||(e)>=sys_nerr?"unknown":sys_errlist[e]) /**/ /* config-skip */
-#endif
+#define Strerror(e) strerror((e),vaxc$errno)
/* HAS_SYMLINK:
* This symbol, if defined, indicates that the symlink routine is available
*/
#define HAS_VFORK /**/
+/* Signal_t:
+ * This symbol's value is either "void" or "int", corresponding to the
+ * appropriate return type of a signal handler. Thus, you can declare
+ * a signal handler using "Signal_t (*handler)()", and define the
+ * handler using "Signal_t handler(sig)".
+ */
+#define Signal_t void /* Signal handler's return type */
+
/* HASVOLATILE:
* This symbol, if defined, indicates that this C compiler knows about
* the volatile declaration.
* This symbol, if defined, indicates that the waitpid routine is
* available to wait for child process.
*/
-#undef HAS_WAITPID /**/
+#define HAS_WAITPID /**/
/* HAS_WCSTOMBS:
* This symbol, if defined, indicates that the wcstombs routine is
* available to convert wide character strings to multibyte strings.
*/
-#undef HAS_WCSTOMBS /**/
+#ifdef __DECC
+# define HAS_WCSTOMBS /*config-skip*/
+#else
+# undef HAS_WCSTOMBS /*config-skip*/
+#endif
/* I_DIRENT:
* This symbol, if defined, indicates to the C program that it should
* include <limits.h> to get definition of symbols like WORD_BIT or
* LONG_MAX, i.e. machine dependant limitations.
*/
-#undef I_LIMITS /**/
+#define I_LIMITS /**/
/* I_MEMORY:
* This symbol, if defined, indicates to the C program that it should
#undef PWCHANGE /**/
#undef PWCLASS /**/
#undef PWEXPIRE /**/
-#undef PWCOMMENT /**/
+#define PWCOMMENT /**/
/* I_STDDEF:
* This symbol, if defined, indicates that <stddef.h> exists and should
*/
#undef I_SYS_IOCTL /**/
-/* HAS_IOCTL:
- * This symbol, if defined, indicates that the ioctl() routine is
- * available to set I/O characteristics
- */
-#undef HAS_IOCTL /**/
-
/* I_SYS_NDIR:
* This symbol, if defined, indicates to the C program that it should
* include <sys/ndir.h>.
*/
#undef I_SYS_NDIR /**/
+/* I_SYS_RESOURCE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/resource.h>.
+ */
+#undef I_SYS_RESOURCE /**/
+
/* I_SYS_SELECT:
* This symbol, if defined, indicates to the C program that it should
* include <sys/select.h> in order to get definition of struct timeval.
*/
#undef I_SYS_SELECT /**/
+/* I_DBM:
+ * This symbol, if defined, indicates that <dbm.h> exists and should
+ * be included.
+ */
+/* I_RPCSVC_DBM:
+ * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and
+ * should be included.
+ */
+#undef I_DBM /**/
+#undef I_RPCSVC_DBM /**/
+
+/* I_SFIO:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sfio.h>.
+ */
+#undef I_SFIO /**/
+
+/* I_SYS_STAT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/stat.h>.
+ */
+#define I_SYS_STAT /**/
/* I_SYS_TIMES:
* This symbol, if defined, indicates to the C program that it should
*/
#undef I_SYS_TIMES /**/
+/* I_SYS_TYPES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/types.h>.
+ */
+#define I_SYS_TYPES /**/
+
+/* I_SYS_UN:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/un.h> to get UNIX domain socket definitions.
+ */
+#undef I_SYS_UN /**/
+
+/* I_SYS_WAIT:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <sys/wait.h>.
+ */
+#undef I_SYS_WAIT /**/
+
/* I_TERMIO:
* This symbol, if defined, indicates that the program should include
* <termio.h> rather than <sgtty.h>. There are also differences in
*/
#undef I_UTIME /**/
-/* HAS_UTIME:
- * This symbol, if defined, indicates that the routine utime() is
- * available to update the access and modification times of files.
- */
-#undef HAS_UTIME /**/
-
-/* I_STDARG:
- * This symbol, if defined, indicates that <stdarg.h> exists and should
- * be included.
- */
/* I_VARARGS:
* This symbol, if defined, indicates to the C program that it should
* include <varargs.h>.
*/
-#define I_STDARG /**/
#undef I_VARARGS /**/
*/
#undef I_VFORK /**/
-/* INTSIZE:
- * This symbol contains the size of an int, so that the C preprocessor
- * can make decisions based on it.
- */
-#define INTSIZE 4 /**/
-
-
/* CAN_PROTOTYPE:
* If defined, this macro indicates that the C compiler can handle
* function prototypes.
* is defined, and 'int *' otherwise. This is only useful if you
* have select(), of course.
*/
-#define Select_fd_set_t fd_set * /**/
+#define Select_fd_set_t int * /**/
/* STDCHAR:
* This symbol is defined to be the type of char used in stdio.h.
*/
#define STDCHAR char /**/
-/* VOIDFLAGS:
- * This symbol indicates how much support of the void type is given by this
- * compiler. What various bits mean:
- *
- * 1 = supports declaration of void
- * 2 = supports arrays of pointers to functions returning void
- * 4 = supports comparisons between pointers to void functions and
- * addresses of void functions
- * 8 = suports declaration of generic void pointers
- *
- * The package designer should define VOIDUSED to indicate the requirements
- * of the package. This can be done either by #defining VOIDUSED before
- * including config.h, or by defining defvoidused in Myinit.U. If the
- * latter approach is taken, only those flags will be tested. If the
- * level of void support necessary is not present, defines void to int.
- */
-#ifndef VOIDUSED
-#define VOIDUSED 15
-#endif
-#define VOIDFLAGS 15
-#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
-#define void int /* is void to be avoided? */ /* config-skip */
-#define M_VOID /* Xenix strikes again */ /* config-skip */
-#endif
-
-
-/* EUNICE:
- * This symbol, if defined, indicates that the program is being compiled
- * under the EUNICE package under VMS. The program will need to handle
- * things like files that don't go away the first time you unlink them,
- * due to version numbering. It will also need to compensate for lack
- * of a respectable link() command.
- */
-/* VMS:
- * This symbol, if defined, indicates that the program is running under
- * VMS. It is currently only set in conjunction with the EUNICE symbol.
+/* UNLINK_ALL_VERSIONS:
+ * This symbol, if defined, indicates that the program should arrange
+ * to remove all versions of a file if unlink() is called.
*/
-#define EUNICE /**/
-/* This symbol is automagically defined by all VMS C compilers I've seen.
- * Just in case, however . . . */
-#ifndef VMS
-#define VMS /**/
-#endif
+#undef UNLINK_ALL_VERSIONS /**/
/* LOC_SED:
* This symbol holds the complete pathname to the sed program.
* This symbol holds the path of the bin directory where the package will
* be installed. Program must be prepared to deal with ~name substitution.
*/
+/* BIN_EXP:
+ * This symbol is the filename expanded version of the BIN symbol, for
+ * programs that do not want to deal with that at run-time.
+ */
#define BIN "/perl_root/000000" /**/
+#define BIN_EXP "/perl_root/000000" /**/
/* HAS_ALARM:
* This symbol, if defined, indicates that the alarm routine is
*/
#define HAS_ALARM /**/
+/* HASATTRIBUTE:
+ * This symbol indicates the C compiler can check for function attributes,
+ * such as printf formats. This is normally only supported by GNU cc.
+ */
+#ifdef __GNUC__
+# define HASATTRIBUTE /*config-skip*/
+#else
+# undef HASATTRIBUTE /*config-skip*/
+#endif
+#ifndef HASATTRIBUTE
+#define __attribute__(_arg_)
+#endif
+
/* CASTI32:
* This symbol is defined if the C compiler can cast negative
* or large floating point numbers to 32-bit ints.
* This symbol, if defined, indicates that the getlogin routine is
* available.
*/
-#undef HAS_GETLOGIN /**/
+#define HAS_GETLOGIN /**/
/* HAS_GETPPID:
* This symbol, if defined, indicates that the getppid routine is
*/
#undef HAS_GETPPID /**/
-/* HAS_GETGRENT:
- * This symbol, if defined, indicates that the getgrent routine is
- * available.
- */
-#undef HAS_GETGRENT /**/
-
/* HAS_HTONL:
* This symbol, if defined, indicates that the htonl() routine (and
* friends htons() ntohl() ntohs()) are available to do network
* This symbol, if defined, indicates that the mblen routine is available
* to find the number of bytes in a multibye character.
*/
-#undef HAS_MBLEN /**/
+#ifdef __DECC
+# define HAS_MBLEN /*config-skip*/
+#else
+# undef HAS_MBLEN /*config-skip*/
+#endif
/* HAS_MKTIME:
* This symbol, if defined, indicates that the mktime routine is
* available.
*/
-#undef HAS_MKTIME /**/
+#ifdef __DECC
+# define HAS_MKTIME /*config-skip*/
+#else
+# undef HAS_MKTIME /*config-skip*/
+#endif
/* HAS_NICE:
* This symbol, if defined, indicates that the nice routine is
*/
#define HAS_NICE /**/
-/* HAS_PASSWD:
- * This symbol, if defined, indicates that the getpwnam(),
- * getpwuid(), and getpwent() routines are available to
- * get password entries.
- */
-#undef HAS_PASSWD /**/
-
/* HAS_PAUSE:
* This symbol, if defined, indicates that the pause routine is
* available.
* This symbol, if defined, indicates that the strcoll routine is
* available to compare strings using collating information.
*/
-#undef HAS_STRCOLL /**/
+#ifdef __DECC
+# define HAS_STRCOLL /*config-skip*/
+#else
+# undef HAS_STRCOLL /*config-skip*/
+#endif
+
+/* HAS_STRTOD:
+ * This symbol, if defined, indicates that the strtod routine is
+ * available to provide better numeric string conversion than atof().
+ */
+#define HAS_STRTOD /**/
+
+/* HAS_STRTOL:
+ * This symbol, if defined, indicates that the strtol routine is available
+ * to provide better numeric string conversion than atoi() and friends.
+ */
+#define HAS_STRTOL /**/
+
+/* HAS_STRTOUL:
+ * This symbol, if defined, indicates that the strtoul routine is
+ * available to provide conversion of strings to unsigned long.
+ */
+#define HAS_STRTOUL /**/
/* HAS_STRXFRM:
* This symbol, if defined, indicates that the strxfrm() routine is
* available to compare strings using collating information.
*/
-#undef HAS_STRXFRM /**/
+#ifdef __DECC
+# define HAS_STRXFRM /*config-skip*/
+#else
+# undef HAS_STRXFRM /*config-skip*/
+#endif
/* HAS_TCGETPGRP:
* This symbol, if defined, indicates that the tcgetpgrp routine is
*/
#define HAS_UMASK /**/
-/* VOIDSIG:
- * This symbol is defined if this system declares "void (*signal(...))()" in
- * signal.h. The old way was to declare it as "int (*signal(...))()". It
- * is up to the package author to declare things correctly based on the
- * symbol.
- */
-#define VOIDSIG /**/
-
/* HAS_WCTOMB:
* This symbol, if defined, indicates that the wctomb routine is available
* to covert a wide character to a multibyte.
*/
-#undef HAS_WCTOMB /**/
+#ifdef __DECC
+# define HAS_WCTOMB /*config-skip*/
+#else
+# undef HAS_WCTOMB /*config-skip*/
+#endif
/* Fpos_t:
* This symbol holds the type used to declare file positions in libc.
* It can be int, ushort, uid_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
-#define Gid_t unsigned int /* Type for getgid(), etc... */
+#if defined(__DECC) && defined(__DECC_VER) && (__DECC_VER >= 500000)
+# define Gid_t gid_t /* config-skip */
+#else
+# define Gid_t unsigned int /* config-skip */
+#endif
/* I_DLFCN:
* This symbol, if defined, indicates that <dlfcn.h> exists and should
*/
#define I_MATH /**/
+/* INTSIZE:
+ * This symbol contains the size of an int, so that the C preprocessor
+ * can make decisions based on it.
+ */
+/* LONGSIZE:
+ * This symbol contains the value of sizeof(long) so that the C
+ * preprocessor can make decisions based on it.
+ */
+/* SHORTSIZE:
+ * This symbol contains the value of sizeof(short) so that the C
+ * preprocessor can make decisions based on it.
+ */
+#define INTSIZE 4 /**/
+#define LONGSIZE 4 /**/
+#define SHORTSIZE 2 /**/
+
/* Off_t:
* This symbol holds the type used to declare offsets in the kernel.
* It can be int, long, off_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
#define Off_t int /* <offset> type */
+
+/* I_VALUES:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <values.h> to get definition of symbols like MINFLOAT or
+ * MAXLONG, i.e. machine dependant limitations. Probably, you
+ * should use <limits.h> instead, if it is available.
+ */
+#undef I_VALUES /**/
+
+/* Free_t:
+ * This variable contains the return type of free(). It is usually
+ * void, but occasionally int.
+ */
/* Malloc_t:
* This symbol is the type of pointer returned by malloc and realloc.
*/
#define Malloc_t void * /**/
+#define Free_t void /**/
/* MYMALLOC:
* This symbol, if defined, indicates that we're using our own malloc.
*/
#undef MYMALLOC /**/
+/* SH_PATH:
+ * This symbol contains the full pathname to the shell used on this
+ * on this system to execute Bourne shell scripts. Usually, this will be
+ * /bin/sh, though it's possible that some systems will have /bin/ksh,
+ * /bin/pdksh, /bin/ash, /bin/bash, or even something such as D:/bin/sh.
+ */
+#define SH_PATH "MCR" /**/
+
+/* SIG_NAME:
+ * This symbol contains a list of signal names in order. This is intended
+ * to be used as a static array initialization, like this:
+ * char *sig_name[] = { SIG_NAME };
+ * The signals in the list are separated with commas, and each signal
+ * is surrounded by double quotes. There is no leading SIG in the signal
+ * name, i.e. SIGQUIT is known as "QUIT". Duplicates are allowed.
+ * The signal number for sig_name[i] is stored in sig_num[i].
+ * The last element is 0 to terminate the list with a NULL. This
+ * corresponds to the 0 at the end of the sig_num list.
+ * See SIG_NUM and SIG_MAX.
+ */
+#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","IOT","EMT","FPE",\
+ "KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM",\
+ "ABRT","USR1","USR2",0
+
+/* SIG_NUM:
+ * This symbol contains a list of signal number, in the same order as the
+ * SIG_NAME list. It is suitable for static array initialization, as in:
+ * int sig_num[] = { SIG_NUM };
+ * The signals in the list are separated with commas, and the indices
+ * within that list and the SIG_NAME list match, so it's easy to compute
+ * the signal name from a number or vice versa at the price of a small
+ * dynamic linear lookup. Duplicates are allowed, so you can't assume
+ * sig_num[i] == i. Instead, the signal number corresponding to
+ * sig_name[i] is sig_number[i].
+ * The last element is 0, corresponding to the 0 at the end of
+ * the sig_name list.
+ */
+#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,0 /**/
+
/* Mode_t:
* This symbol holds the type used to declare file modes
* for systems calls. It is usually mode_t, but may be
*/
#define SSize_t int /* signed count of bytes */
+/* VAL_O_NONBLOCK:
+ * This symbol is to be used during open() or fcntl(F_SETFL) to turn on
+ * non-blocking I/O for the file descriptor. Note that there is no way
+ * back, i.e. you cannot turn it blocking again this way. If you wish to
+ * alternatively switch between blocking and non-blocking, use the
+ * ioctl(FIOSNBIO) call instead, but that is not supported by all devices.
+ */
+/* VAL_EAGAIN:
+ * This symbol holds the errno error code set by read() when no data was
+ * present on the non-blocking file descriptor.
+ */
+/* RD_NODATA:
+ * This symbol holds the return code from read() when no data is present
+ * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is
+ * not defined, then you can't distinguish between no data and EOF by
+ * issuing a read(). You'll have to find another way to tell for sure!
+ */
+/* EOF_NONBLOCK:
+ * This symbol, if defined, indicates to the C program that a read() on
+ * a non-blocking file descriptor will return 0 on EOF, and not the value
+ * held in RD_NODATA (-1 usually, in that case!).
+ */
+#undef VAL_O_NONBLOCK
+#undef VAL_EAGAIN
+#undef RD_NODATA
+#undef EOF_NONBLOCK
+
+/* OLDARCHLIB:
+ * This variable, if defined, holds the name of the directory in
+ * which the user has perl5.000 or perl5.001 architecture-dependent
+ * public library files for $package. For the most part, these
+ * files will work with 5.002 (and later), but that is not
+ * guaranteed.
+ */
+/* OLDARCHLIB_EXP:
+ * This symbol contains the ~name expanded version of OLDARCHLIB, to be
+ * used in programs that are not prepared to deal with ~ expansion at
+ * run-time.
+ */
+/* ==> NOTE <==
+ * This value is automatically updated by FndVers.Com
+ * when Perl is built. Please do not change it by hand; make
+ * any changes to FndVers.Com instead.
+ */
+#define OLDARCHLIB_EXP "/perl_root/lib/VMS_VAX" /**/
+#define OLDARCHLIB OLDARCHLIB_EXP /*config-skip*/
/* PRIVLIB:
* This symbol contains the name of the private library for this package.
* execution path, but it should be accessible by the world. The program
* should be prepared to do ~ expansion.
*/
-#define PRIVLIB "/perl_root/lib" /**/
+/* PRIVLIB_EXP:
+ * This symbol contains the ~name expanded version of PRIVLIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define PRIVLIB_EXP "/perl_root/lib" /**/
+#define PRIVLIB PRIVLIB_EXP /*config-skip*/
-/* SCRIPTDIR:
- * This symbol holds the name of the directory in which the user wants
- * to put publicly executable scripts for the package in question. It
- * is often a directory that is mounted across diverse architectures.
- * Programs must be prepared to deal with ~name expansion.
+/* SITELIB:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * Individual sites may place their own extensions and modules in
+ * this directory.
*/
-#define SCRIPTDIR "/perl_root/script" /**/
+/* SITELIB_EXP:
+ * This symbol contains the ~name expanded version of SITELIB, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+#define SITELIB_EXP "/perl_root/lib/site_perl" /**/
+#define SITELIB SITELIB_EXP /*config-skip*/
-/* SIG_NAME:
- * This symbol contains a list of signal names in order. This is intended
- * to be used as a static array initialization, like this:
- * char *sig_name[] = { SIG_NAME };
- * The signals in the list are separated with commas, and each signal
- * is surrounded by double quotes. There is no leading SIG in the signal
- * name, i.e. SIGQUIT is known as "QUIT".
+/* SITEARCH:
+ * This symbol contains the name of the private library for this package.
+ * The library is private in the sense that it needn't be in anyone's
+ * execution path, but it should be accessible by the world. The program
+ * should be prepared to do ~ expansion.
+ * The standard distribution will put nothing in this directory.
+ * Individual sites may place their own extensions and modules in
+ * this directory.
*/
-#define SIG_NAME "HUP","INT","QUIT","ILL","TRAP","IOT","EMT","FPE","KILL",\
- "BUS","SEGV","SYS","PIPE","ALRM","TERM"
+/* SITEARCH_EXP:
+ * This symbol contains the ~name expanded version of SITEARCH, to be used
+ * in programs that are not prepared to deal with ~ expansion at run-time.
+ */
+/* ==> NOTE <==
+ * This value is automatically updated by FndVers.Com
+ * when Perl is built. Please do not change it by hand; make
+ * any changes to FndVers.Com instead.
+ */
+#define SITEARCH_EXP "/perl_root/lib/site_perl/VMS_VAX" /**/
+#define SITEARCH SITEARCH_EXP /*config-skip*/
/* Size_t:
* This symbol holds the type used to declare length parameters
* It can be int, ushort, uid_t, etc... It may be necessary to include
* <sys/types.h> to get any typedef'ed information.
*/
-#define Uid_t unsigned int /* UID type */
+#if defined(__DECC) && defined(__DECC_VER) && (__DECC_VER >= 500000)
+# define Uid_t uid_t /* config-skip */
+#else
+# define Uid_t unsigned int /* config-skip */
+#endif
/* I_SYS_PARAM:
* This symbol, if defined, indicates to the C program that it should
*/
#undef I_SYS_PARAM
-/* GNUC_ATTRIBUTE_CHECK:
- * This symbol indicates the C compiler can check for function attributes,
- * such as printf formats.
- */
-/* VMS: true for gcc, undef for VAXC/DECC. This is handled in Descrip.MMS
- * C. Bailey 26-Aug-1994
- */
-/*#define GNUC_ATTRIBUTE_CHECK /* */
-
/* VOID_CLOSEDIR:
* This symbol, if defined, indicates that the closedir() routine
* does not return a value.
#undef SETUID_SCRIPTS_ARE_SECURE_NOW /**/
#undef DOSUID /**/
-/* HAS_DREM:
- * This symbol, if defined, indicates that the drem routine is
- * available. This is a Pyramid routine that is the same as
- * fmod.
- */
-#undef HAS_DREM /**/
-
-/* HAS_FMOD:
- * This symbol, if defined, indicates that the fmod routine is
- * available.
- */
-#define HAS_FMOD /**/
-
-/* Gconvert:
- * This preprocessor macro is defined to convert a floating point
- * number to a string without a trailing decimal point. This
- * emulates the behavior of sprintf("%g"), but is sometimes much more
- * efficient. If gconvert() is not available, but gcvt() drops the
- * trailing decimal point, then gcvt() is used. If all else fails,
- * a macro using sprintf("%g") is used.
+/* HAS_INET_ATON:
+ * This symbol, if defined, indicates to the C program that the
+ * inet_aton() function is available to parse IP address "dotted-quad"
+ * strings.
+ * VMS: SocketShr doesn't support this, so we let the Socket extension
+ * roll its own.
*/
-#define Gconvert(x,n,t,b) my_gconvert(x,n,t,b)
+#undef HAS_INET_ATON /**/
/* HAS_ISASCII:
* This manifest constant lets the C program know that the
*/
#define HAS_ISASCII /**/
-/* USE_LINUX_STDIO:
- * This symbol is defined if this system has a FILE structure declaring
- * _IO_read_base, _IO_read_ptr, and _IO_read_end in stdio.h.
+/* HAS_SETLOCALE:
+ * This symbol, if defined, indicates that the setlocale routine is
+ * available to handle locale-specific ctype implementations.
+ */
+/* I_LOCALE:
+ * This symbol, if defined, indicates to the C program that it should
+ * include <locale.h>.
*/
-#undef USE_LINUX_STDIO /**/
-
/* HAS_LOCALECONV:
* This symbol, if defined, indicates that the localeconv routine is
* available for numeric and monetary formatting conventions.
*/
-#undef HAS_LOCALECONV /**/
+#ifdef __DECC
+# define I_LOCALE /*config-skip*/
+# define HAS_SETLOCALE /*config-skip*/
+# define HAS_LOCALECONV /*config-skip*/
+#else
+# undef I_LOCALE /*config-skip*/
+# undef HAS_SETLOCALE /*config-skip*/
+# undef HAS_LOCALECONV /*config-skip*/
+#endif
/* HAS_MKFIFO:
* This symbol, if defined, indicates that the mkfifo routine is
*/
#define HAS_SAFE_MEMCPY /**/
+/* HAS_SANE_MEMCMP:
+ * This symbol, if defined, indicates that the memcmp routine is available
+ * and can be used to compare relative magnitudes of chars with their high
+ * bits set. If it is not defined, roll your own version.
+ */
+#define HAS_SANE_MEMCMP /**/
+
/* HAS_SETPGRP:
* This symbol, if defined, indicates that the setpgrp routine is
* available to set the current process group.
*/
+/* USE_BSD_SETPGRP:
+ * This symbol, if defined, indicates that setpgrp needs two
+ * arguments whereas USG one needs none. See also HAS_SETPGID
+ * for a POSIX interface.
+ */
/* USE_BSDPGRP:
* This symbol, if defined, indicates that the BSD notion of process
* group is to be used. For instance, you have to say setpgrp(pid, pgrp)
* instead of the USG setpgrp().
*/
#undef HAS_SETPGRP /**/
+#undef USE_BSD_SETPGRP /**/
#undef USE_BSDPGRP /**/
+/* HAS_SETPGID:
+ * This symbol, if defined, indicates that the setpgid routine is
+ * available to set process group ID.
+ */
+#undef HAS_SETPGID /**/
+
+/* HAS_SETPGRP2:
+ * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX)
+ * routine is available to set the current process group.
+ */
+#undef HAS_SETPGRP2 /**/
+
/* HAS_SYSCONF:
* This symbol, if defined, indicates that sysconf() is available
* to determine system related limits and options.
*/
#undef HAS_SYSCONF /**/
+/* Gconvert:
+ * This preprocessor macro is defined to convert a floating point
+ * number to a string without a trailing decimal point. This
+ * emulates the behavior of sprintf("%g"), but is sometimes much more
+ * efficient. If gconvert() is not available, but gcvt() drops the
+ * trailing decimal point, then gcvt() is used. If all else fails,
+ * a macro using sprintf("%g") is used. Arguments for the Gconvert
+ * macro are: value, number of digits, whether trailing zeros should
+ * be retained, and the output buffer.
+ * Possible values are:
+ * d_Gconvert='gconvert((x),(n),(t),(b))'
+ * d_Gconvert='gcvt((x),(n),(b))'
+ * d_Gconvert='sprintf((b),"%.*g",(n),(x))'
+ * The last two assume trailing zeros should not be kept.
+ */
+#define Gconvert(x,n,t,b) my_gconvert(x,n,t,b)
+
+/* HAS_GETPGID:
+ * This symbol, if defined, indicates to the C program that
+ * the getpgid(pid) function is available to get the
+ * process group id.
+ */
+#undef HAS_GETPGID /**/
+
+/* HAS_GETPGRP:
+ * This symbol, if defined, indicates that the getpgrp routine is
+ * available to get the current process group.
+ */
+/* USE_BSD_GETPGRP:
+ * This symbol, if defined, indicates that getpgrp needs one
+ * arguments whereas USG one needs none.
+ */
+#undef HAS_GETPGRP /**/
+#undef USE_BSD_GETPGRP /**/
+
+/* HAS_GETPGRP2:
+ * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX)
+ * routine is available to get the current process group.
+ */
+#undef HAS_GETPGRP2 /**/
+
+/* USE_SFIO:
+ * This symbol, if defined, indicates that sfio should
+ * be used.
+ */
+#undef USE_SFIO /**/
+
+/* Sigjmp_buf:
+ * This is the buffer type to be used with Sigsetjmp and Siglongjmp.
+ */
+/* Sigsetjmp:
+ * This macro is used in the same way as sigsetjmp(), but will invoke
+ * traditional setjmp() if sigsetjmp isn't available.
+ */
+/* Siglongjmp:
+ * This macro is used in the same way as siglongjmp(), but will invoke
+ * traditional longjmp() if siglongjmp isn't available.
+ */
+#undef HAS_SIGSETJMP /**/
+#ifdef HAS_SIGSETJMP
+#define Sigjmp_buf sigjmp_buf /* config-skip */
+#define Sigsetjmp(buf,save_mask) sigsetjmp(buf,save_mask) /* config-skip */
+#define Siglongjmp(buf,retval) siglongjmp(buf,retval) /* config-skip */
+#else
+#define Sigjmp_buf jmp_buf /* config-skip */
+#define Sigsetjmp(buf,save_mask) setjmp(buf) /* config-skip */
+#define Siglongjmp(buf,retval) longjmp(buf,retval) /* config-skip */
+#endif
+
/* USE_DYNAMIC_LOADING:
* This symbol, if defined, indicates that dynamic loading of
* some sort is available.
*/
#define USE_DYNAMIC_LOADING /**/
+/* STARTPERL:
+ * This variable contains the string to put in front of a perl
+ * script to make sure (one hopes) that it runs with perl and not
+ * some shell.
+ */
+#define STARTPERL "" /**/
+
+/* Groups_t:
+ * This symbol holds the type used for the second argument to
+ * getgroups(). Usually, this is the same of gidtype, but
+ * sometimes it isn't. It can be int, ushort, uid_t, etc...
+ * It may be necessary to include <sys/types.h> to get any
+ * typedef'ed information. This is only required if you have
+ * getgroups().
+ */
+#ifdef HAS_GETGROUPS
+#define Groups_t unsigned int /* Type for 2nd arg to getgroups() */ /* config-skip */
+#endif
+
+/* DB_Prefix_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is u_int32_t.
+ */
+/* DB_Hash_t:
+ * This symbol contains the type of the prefix structure element
+ * in the <db.h> header file. In older versions of DB, it was
+ * int, while in newer ones it is size_t.
+ */
+#undef DB_Hash_t /**/
+#undef DB_Prefix_t /**/
+
+/* USE_PERLIO:
+ * This symbol, if defined, indicates that the PerlIO abstraction should
+ * be used throughout. If not defined, stdio should be
+ * used in a fully backward compatible manner.
+ */
+#undef USE_PERLIO /**/
+
+/* VOIDFLAGS:
+ * This symbol indicates how much support of the void type is given by this
+ * compiler. What various bits mean:
+ *
+ * 1 = supports declaration of void
+ * 2 = supports arrays of pointers to functions returning void
+ * 4 = supports comparisons between pointers to void functions and
+ * addresses of void functions
+ * 8 = suports declaration of generic void pointers
+ *
+ * The package designer should define VOIDUSED to indicate the requirements
+ * of the package. This can be done either by #defining VOIDUSED before
+ * including config.h, or by defining defvoidused in Myinit.U. If the
+ * latter approach is taken, only those flags will be tested. If the
+ * level of void support necessary is not present, defines void to int.
+ */
+#ifndef VOIDUSED
+#define VOIDUSED 15
+#endif
+#define VOIDFLAGS 15
+#if (VOIDFLAGS & VOIDUSED) != VOIDUSED
+#define void int /* is void to be avoided? */ /* config-skip */
+#define M_VOID /* Xenix strikes again */ /* config-skip */
+#endif
+
#ifdef VMS_DO_SOCKETS
/* HAS_SOCKET:
* This symbol, if defined, indicates that the BSD socket interface is
*/
#undef I_NETINET_IN /**/ /* config-skip */
-/* Groups_t:
- * This symbol holds the type used for the second argument to
- * getgroups(). Usually, this is the same of gidtype, but
- * sometimes it isn't. It can be int, ushort, uid_t, etc...
- * It may be necessary to include <sys/types.h> to get any
- * typedef'ed information. This is only required if you have
- * getgroups().
- */
-#ifdef HAS_GETGROUPS
-#define Groups_t unsigned int /* Type for 2nd arg to getgroups() */ /* config-skip */
-#endif
-
/* I_NET_ERRNO:
* This symbol, if defined, indicates that <net/errno.h> exists and
* should be included.
*/
#undef I_NET_ERRNO /**/ /* config-skip */
+/* HAS_SELECT:
+ * This symbol, if defined, indicates that the select routine is
+ * available to select active file descriptors. If the timeout field
+ * is used, <sys/time.h> may need to be included.
+ */
+#define HAS_SELECT /**/ /* config-skip */
+
#else /* VMS_DO_SOCKETS */
#undef HAS_SOCKET /**/ /* config-skip */
#undef HAS_GETHOSTENT /**/ /* config-skip */
#undef I_NETINET_IN /**/ /* config-skip */
#undef I_NET_ERRNO /**/ /* config-skip */
+#undef HAS_SELECT /**/ /* config-skip */
#endif /* !VMS_DO_SOCKETS */