#!/usr/local/bin/perl
+# This is for generating the perldoc executable.
+# It may eventually be expanded to generate many executables, as
+# explained in the preface of /Programming Perl/ 3e.
+
+require 5;
+use strict;
use Config;
use File::Basename qw(&basename &dirname);
use Cwd;
# This forces PL files to create target in same directory as PL file.
# This is so that make depend always knows where to find PL derivatives.
-$origdir = cwd;
+
+my $origdir = cwd;
chdir dirname($0);
-$file = basename($0, '.PL');
+my $file = basename($0, '.PL');
+my $file_shortname = $file; # should be like "perldoc", maybe "perlsyn", etc.
+warn "How odd, I'm going to generate $file_shortname?!"
+ unless $file_shortname =~ m/^\w+$/;
+
$file .= '.com' if $^O eq 'VMS';
open OUT,">$file" or die "Can't create $file: $!";
-print "Extracting $file (with variable substitutions)\n";
+print "Extracting \"$file\" (with variable substitutions)\n";
# In this section, perl variables will be expanded during extraction.
# You can use $Config{...} to use Configure variables.
print OUT <<"!GROK!THIS!";
$Config{startperl}
eval 'exec $Config{perlpath} -S \$0 \${1+"\$@"}'
- if \$running_under_some_shell;
-
-\@pagers = ();
-push \@pagers, "$Config{'pager'}" if -x "$Config{'pager'}";
-!GROK!THIS!
-
-# In the following, perl variables are not expanded during extraction.
-
-print OUT <<'!NO!SUBS!';
-
-#
-# Perldoc revision #1 -- look up a piece of documentation in .pod format that
-# is embedded in the perl installation tree.
-#
-# This is not to be confused with Tom Christianson's perlman, which is a
-# man replacement, written in perl. This perldoc is strictly for reading
-# the perl manuals, though it too is written in perl.
-
-if(@ARGV<1) {
- $me = $0; # Editing $0 is unportable
- $me =~ s,.*/,,;
- die <<EOF;
-Usage: $me [-h] [-r] [-i] [-v] [-t] [-u] [-m] [-l] [-F] [-X] PageName|ModuleName|ProgramName
- $me -f PerlFunc
- $me -q FAQKeywords
-
-The -h option prints more help. Also try "perldoc perldoc" to get
-aquainted with the system.
-EOF
-}
-
-use Getopt::Std;
-use Config '%Config';
-
-@global_found = ();
-$global_target = "";
-
-$Is_VMS = $^O eq 'VMS';
-$Is_MSWin32 = $^O eq 'MSWin32';
-$Is_Dos = $^O eq 'dos';
-
-sub usage{
- warn "@_\n" if @_;
- # Erase evidence of previous errors (if any), so exit status is simple.
- $! = 0;
- die <<EOF;
-perldoc [options] PageName|ModuleName|ProgramName...
-perldoc [options] -f BuiltinFunction
-perldoc [options] -q FAQRegex
-
-Options:
- -h Display this help message
- -r Recursive search (slow)
- -i Ignore case
- -t Display pod using pod2text instead of pod2man and nroff
- (-t is the default on win32)
- -u Display unformatted pod text
- -m Display module's file in its entirety
- -l Display the module's file name
- -F Arguments are file names, not modules
- -v Verbosely describe what's going on
- -X use index if present (looks for pod.idx at $Config{archlib})
-
-
-PageName|ModuleName...
- is the name of a piece of documentation that you want to look at. You
- may either give a descriptive name of the page (as in the case of
- `perlfunc') the name of a module, either like `Term::Info',
- `Term/Info', the partial name of a module, like `info', or
- `makemaker', or the name of a program, like `perldoc'.
-
-BuiltinFunction
- is the name of a perl function. Will extract documentation from
- `perlfunc'.
-
-FAQRegex
- is a regex. Will search perlfaq[1-9] for and extract any
- questions that match.
-
-Any switches in the PERLDOC environment variable will be used before the
-command line arguments. The optional pod index file contains a list of
-filenames, one per line.
-
-EOF
-}
-
-use Text::ParseWords;
-
-
-unshift(@ARGV,shellwords($ENV{"PERLDOC"}));
-
-getopts("mhtluvriFf:Xq") || usage;
-
-usage if $opt_h || $opt_h; # avoid -w warning
-
-$podidx = "$Config{'archlib'}/pod.idx";
-$podidx = "" if $opt_X || !-f "pod.idx" && !-r _ && -M _ > 7;
-
-if ($opt_t + $opt_u + $opt_m + $opt_l > 1) {
- usage("only one of -t, -u, -m or -l")
-} elsif ($Is_MSWin32 || $Is_Dos) {
- $opt_t = 1 unless $opt_t + $opt_u + $opt_m + $opt_l;
-}
-
-if ($opt_t) { require Pod::Text; import Pod::Text; }
-
-if ($opt_f) {
- @pages = ("perlfunc");
-} elsif ($opt_q) {
- @pages = ("perlfaq1" .. "perlfaq9");
-} else {
- @pages = @ARGV;
-}
-
-# Does this look like a module or extension directory?
-if (-f "Makefile.PL") {
- # Add ., lib and blib/* libs to @INC (if they exist)
- unshift(@INC, '.');
- unshift(@INC, 'lib') if -d 'lib';
- require ExtUtils::testlib;
-}
-
-
-
-sub containspod {
- my($file, $readit) = @_;
- return 1 if !$readit && $file =~ /\.pod$/i;
- local($_);
- open(TEST,"<$file");
- while(<TEST>) {
- if(/^=head/) {
- close(TEST);
- return 1;
- }
- }
- close(TEST);
- return 0;
-}
-
-sub minus_f_nocase {
- my($dir,$file) = @_;
- my $path = join('/',$dir,$file);
- return $path if -f $path and -r _;
- if (!$opt_i or $Is_VMS or $Is_MSWin32 or $Is_Dos or $^O eq 'os2') {
- # on a case-forgiving file system or if case is important
- # that is it all we can do
- warn "Ignored $file: unreadable\n" if -f _;
- return '';
- }
- local *DIR;
- local($")="/";
- my @p = ($dir);
- my($p,$cip);
- foreach $p (split(/\//, $file)){
- my $try = "@p/$p";
- stat $try;
- if (-d _){
- push @p, $p;
- if ( $p eq $global_target) {
- $tmp_path = join ('/', @p);
- my $path_f = 0;
- for (@global_found) {
- $path_f = 1 if $_ eq $tmp_path;
- }
- push (@global_found, $tmp_path) unless $path_f;
- print STDERR "Found as @p but directory\n" if $opt_v;
- }
- } elsif (-f _ && -r _) {
- return $try;
- } elsif (-f _) {
- warn "Ignored $try: unreadable\n";
- } else {
- my $found=0;
- my $lcp = lc $p;
- opendir DIR, "@p";
- while ($cip=readdir(DIR)) {
- if (lc $cip eq $lcp){
- $found++;
- last;
- }
- }
- closedir DIR;
- return "" unless $found;
- push @p, $cip;
- return "@p" if -f "@p" and -r _;
- warn "Ignored $file: unreadable\n" if -f _;
- }
- }
- return "";
-}
-
-
-sub check_file {
- my($dir,$file) = @_;
- if ($opt_m) {
- return minus_f_nocase($dir,$file);
- } else {
- my $path = minus_f_nocase($dir,$file);
- return $path if containspod($path);
- }
- return "";
-}
-
-
-sub searchfor {
- my($recurse,$s,@dirs) = @_;
- $s =~ s!::!/!g;
- $s = VMS::Filespec::unixify($s) if $Is_VMS;
- return $s if -f $s && containspod($s);
- printf STDERR "Looking for $s in @dirs\n" if $opt_v;
- my $ret;
- my $i;
- my $dir;
- $global_target = (split('/', $s))[-1];
- for ($i=0; $i<@dirs; $i++) {
- $dir = $dirs[$i];
- ($dir = VMS::Filespec::unixpath($dir)) =~ s!/$!! if $Is_VMS;
- if ( ( $ret = check_file $dir,"$s.pod")
- or ( $ret = check_file $dir,"$s.pm")
- or ( $ret = check_file $dir,$s)
- or ( $Is_VMS and
- $ret = check_file $dir,"$s.com")
- or ( $^O eq 'os2' and
- $ret = check_file $dir,"$s.cmd")
- or ( ($Is_MSWin32 or $Is_Dos or $^O eq 'os2') and
- $ret = check_file $dir,"$s.bat")
- or ( $ret = check_file "$dir/pod","$s.pod")
- or ( $ret = check_file "$dir/pod",$s)
- ) {
- return $ret;
- }
-
- if ($recurse) {
- opendir(D,$dir);
- my @newdirs = map "$dir/$_", grep {
- not /^\.\.?$/ and
- not /^auto$/ and # save time! don't search auto dirs
- -d "$dir/$_"
- } readdir D;
- closedir(D);
- next unless @newdirs;
- @newdirs = map((s/.dir$//,$_)[1],@newdirs) if $Is_VMS;
- print STDERR "Also looking in @newdirs\n" if $opt_v;
- push(@dirs,@newdirs);
- }
- }
- return ();
-}
-
-
-foreach (@pages) {
- if ($podidx && open(PODIDX, $podidx)) {
- my $searchfor = $_;
- local($_);
- $searchfor =~ s,::,/,g;
- print STDERR "Searching for '$searchfor' in $podidx\n" if $opt_v;
- while (<PODIDX>) {
- chomp;
- push(@found, $_) if m,/$searchfor(?:\.(?:pod|pm))?$,i;
- }
- close(PODIDX);
- next;
- }
- print STDERR "Searching for $_\n" if $opt_v;
- # We must look both in @INC for library modules and in PATH
- # for executables, like h2xs or perldoc itself.
- @searchdirs = @INC;
- if ($opt_F) {
- next unless -r;
- push @found, $_ if $opt_m or containspod($_);
- next;
- }
- unless ($opt_m) {
- if ($Is_VMS) {
- my($i,$trn);
- for ($i = 0; $trn = $ENV{'DCL$PATH'.$i}; $i++) {
- push(@searchdirs,$trn);
- }
- push(@dirs,'perl_root:[lib.pod]') # installed pods
- } else {
- push(@searchdirs, grep(-d, split($Config{path_sep},
- $ENV{'PATH'})));
- }
- @files= searchfor(0,$_,@searchdirs);
- }
- if( @files ) {
- print STDERR "Found as @files\n" if $opt_v;
- } else {
- # no match, try recursive search
-
- @searchdirs = grep(!/^\.$/,@INC);
-
- @files= searchfor(1,$_,@searchdirs) if $opt_r;
- if( @files ) {
- print STDERR "Loosely found as @files\n" if $opt_v;
- } else {
- print STDERR "No documentation found for \"$_\".\n";
- if (@global_found) {
- print STDERR "However, try\n";
- my $dir = $file = "";
- for $dir (@global_found) {
- opendir(DIR, $dir) or die "$!";
- while ($file = readdir(DIR)) {
- next if ($file =~ /^\./);
- $file =~ s/\.(pm|pod)$//;
- print STDERR "\tperldoc $_\::$file\n";
- }
- closedir DIR;
- }
- }
- }
- }
- push(@found,@files);
-}
-
-if(!@found) {
- exit ($Is_VMS ? 98962 : 1);
-}
-
-if ($opt_l) {
- print join("\n", @found), "\n";
- exit;
-}
-
-if( ! -t STDOUT ) { $no_tty = 1 }
-
-if ($Is_MSWin32) {
- $tmp = "$ENV{TEMP}\\perldoc1.$$";
- push @pagers, qw( more< less notepad );
- unshift @pagers, $ENV{PAGER} if $ENV{PAGER};
-} elsif ($Is_VMS) {
- $tmp = 'Sys$Scratch:perldoc.tmp1_'.$$;
- push @pagers, qw( most more less type/page );
-} elsif ($Is_Dos) {
- $tmp = "$ENV{TEMP}/perldoc1.$$";
- $tmp =~ tr!\\/!//!s;
- push @pagers, qw( less.exe more.com< );
- unshift @pagers, $ENV{PAGER} if $ENV{PAGER};
-} else {
- if ($^O eq 'os2') {
- require POSIX;
- $tmp = POSIX::tmpnam();
- unshift @pagers, 'less', 'cmd /c more <';
- } else {
- $tmp = "/tmp/perldoc1.$$";
- }
- push @pagers, qw( more less pg view cat );
- unshift @pagers, $ENV{PAGER} if $ENV{PAGER};
-}
-unshift @pagers, $ENV{PERLDOC_PAGER} if $ENV{PERLDOC_PAGER};
-
-if ($opt_m) {
- foreach $pager (@pagers) {
- system("$pager @found") or exit;
- }
- if ($Is_VMS) { eval 'use vmsish qw(status exit); exit $?' }
- exit 1;
-}
-
-if ($opt_f) {
- my $perlfunc = shift @found;
- open(PFUNC, $perlfunc) or die "Can't open $perlfunc: $!";
-
- # Skip introduction
- while (<PFUNC>) {
- last if /^=head2 Alphabetical Listing of Perl Functions/;
- }
+ if 0;
- # Look for our function
- my $found = 0;
- my @pod;
- while (<PFUNC>) {
- if (/^=item\s+\Q$opt_f\E\b/o) {
- $found = 1;
- } elsif (/^=item/) {
- last if $found > 1;
- }
- next unless $found;
- push @pod, $_;
- ++$found if /^\w/; # found descriptive text
- }
- if (@pod) {
- my $lines = $ENV{LINES} || 24;
+# This "$file" file was generated by "$0"
- if ($opt_t) {
- open(FORMATTER, "| pod2text") || die "Can't start filter";
- print FORMATTER "=over 8\n\n";
- print FORMATTER @pod;
- print FORMATTER "=back\n";
- close(FORMATTER);
- } elsif (@pod < $lines-2) {
- print @pod;
- } else {
- foreach $pager (@pagers) {
- open (PAGER, "| $pager") or next;
- print PAGER @pod ;
- close(PAGER) or next;
- last;
- }
- }
- } else {
- die "No documentation for perl function `$opt_f' found\n";
- }
- exit;
-}
+require 5;
+use Pod::Perldoc;
+BEGIN { \$^W = 1 if \$ENV{'PERLDOCDEBUG'} }
+exit( Pod::Perldoc->run() );
-if ($opt_q) {
- local @ARGV = @found; # I'm lazy, sue me.
- my $found = 0;
- my %found_in;
- my @pod;
-
- while (<>) {
- if (/^=head2\s+.*$opt_q/oi) {
- $found = 1;
- push @pod, "=head1 Found in $ARGV\n\n" unless $found_in{$ARGV}++;
- } elsif (/^=head2/) {
- $found = 0;
- }
- next unless $found;
- push @pod, $_;
- }
-
- if (@pod) {
- if ($opt_t) {
- open(FORMATTER, "| pod2text") || die "Can't start filter";
- print FORMATTER "=over 8\n\n";
- print FORMATTER @pod;
- print FORMATTER "=back\n";
- close(FORMATTER);
- } else {
- print @pod;
- }
- } else {
- die "No documentation for perl function `$opt_f' found\n";
- }
- exit;
-}
-
-foreach (@found) {
-
- if($opt_t) {
- open(TMP,">>$tmp");
- Pod::Text::pod2text($_,*TMP);
- close(TMP);
- } elsif(not $opt_u) {
- my $cmd = "pod2man --lax $_ | nroff -man";
- $cmd .= " | col -x" if $^O =~ /hpux/;
- $rslt = `$cmd`;
- unless(($err = $?)) {
- open(TMP,">>$tmp");
- print TMP $rslt;
- close TMP;
- }
- }
-
- if( $opt_u or $err or -z $tmp) {
- open(OUT,">>$tmp");
- open(IN,"<$_");
- $cut = 1;
- while (<IN>) {
- $cut = $1 eq 'cut' if /^=(\w+)/;
- next if $cut;
- print OUT;
- }
- close(IN);
- close(OUT);
- }
-}
-
-if( $no_tty ) {
- open(TMP,"<$tmp");
- print while <TMP>;
- close(TMP);
-} else {
- foreach $pager (@pagers) {
- system("$pager $tmp") or last;
- }
-}
-
-1 while unlink($tmp); #Possibly pointless VMSism
-
-exit 0;
-
-__END__
-
-=head1 NAME
-
-perldoc - Look up Perl documentation in pod format.
-
-=head1 SYNOPSIS
-
-B<perldoc> [B<-h>] [B<-v>] [B<-t>] [B<-u>] [B<-m>] [B<-l>] [B<-F>] [B<-X>] PageName|ModuleName|ProgramName
-
-B<perldoc> B<-f> BuiltinFunction
-
-=head1 DESCRIPTION
-
-I<perldoc> looks up a piece of documentation in .pod format that is embedded
-in the perl installation tree or in a perl script, and displays it via
-C<pod2man | nroff -man | $PAGER>. (In addition, if running under HP-UX,
-C<col -x> will be used.) This is primarily used for the documentation for
-the perl library modules.
-
-Your system may also have man pages installed for those modules, in
-which case you can probably just use the man(1) command.
-
-=head1 OPTIONS
-
-=over 5
-
-=item B<-h> help
-
-Prints out a brief help message.
-
-=item B<-v> verbose
-
-Describes search for the item in detail.
-
-=item B<-t> text output
-
-Display docs using plain text converter, instead of nroff. This may be faster,
-but it won't look as nice.
-
-=item B<-u> unformatted
-
-Find docs only; skip reformatting by pod2*
-
-=item B<-m> module
-
-Display the entire module: both code and unformatted pod documentation.
-This may be useful if the docs don't explain a function in the detail
-you need, and you'd like to inspect the code directly; perldoc will find
-the file for you and simply hand it off for display.
-
-=item B<-l> file name only
-
-Display the file name of the module found.
-
-=item B<-F> file names
-
-Consider arguments as file names, no search in directories will be performed.
-
-=item B<-f> perlfunc
-
-The B<-f> option followed by the name of a perl built in function will
-extract the documentation of this function from L<perlfunc>.
-
-=item B<-X> use an index if present
-
-The B<-X> option looks for a entry whose basename matches the name given on the
-command line in the file C<$Config{archlib}/pod.idx>. The pod.idx file should
-contain fully qualified filenames, one per line.
-
-=item B<PageName|ModuleName|ProgramName>
-
-The item you want to look up. Nested modules (such as C<File::Basename>)
-are specified either as C<File::Basename> or C<File/Basename>. You may also
-give a descriptive name of a page, such as C<perlfunc>. You make also give a
-partial or wrong-case name, such as "basename" for "File::Basename", but
-this will be slower, if there is more then one page with the same partial
-name, you will only get the first one.
-
-=back
-
-=head1 ENVIRONMENT
-
-Any switches in the C<PERLDOC> environment variable will be used before the
-command line arguments. C<perldoc> also searches directories
-specified by the C<PERL5LIB> (or C<PERLLIB> if C<PERL5LIB> is not
-defined) and C<PATH> environment variables.
-(The latter is so that embedded pods for executables, such as
-C<perldoc> itself, are available.) C<perldoc> will use, in order of
-preference, the pager defined in C<PERLDOC_PAGER>, C<MANPAGER>, or
-C<PAGER> before trying to find a pager on its own. (C<MANPAGER> is not
-used if C<perldoc> was told to display plain text or unformatted pod.)
-
-=head1 AUTHOR
-
-Kenneth Albanowski <kjahds@kjahds.com>
-
-Minor updates by Andy Dougherty <doughera@lafcol.lafayette.edu>
-
-=cut
+!GROK!THIS!
-#
-# Version 1.13: Fri Feb 27 16:20:50 EST 1997
-# Gurusamy Sarathy <gsar@umich.edu>
-# -doc tweaks for -F and -X options
-# Version 1.12: Sat Apr 12 22:41:09 EST 1997
-# Gurusamy Sarathy <gsar@umich.edu>
-# -various fixes for win32
-# Version 1.11: Tue Dec 26 09:54:33 EST 1995
-# Kenneth Albanowski <kjahds@kjahds.com>
-# -added Charles Bailey's further VMS patches, and -u switch
-# -added -t switch, with pod2text support
-#
-# Version 1.10: Thu Nov 9 07:23:47 EST 1995
-# Kenneth Albanowski <kjahds@kjahds.com>
-# -added VMS support
-# -added better error recognition (on no found pages, just exit. On
-# missing nroff/pod2man, just display raw pod.)
-# -added recursive/case-insensitive matching (thanks, Andreas). This
-# slows things down a bit, unfortunately. Give a precise name, and
-# it'll run faster.
-#
-# Version 1.01: Tue May 30 14:47:34 EDT 1995
-# Andy Dougherty <doughera@lafcol.lafayette.edu>
-# -added pod documentation.
-# -added PATH searching.
-# -added searching pod/ subdirectory (mainly to pick up perlfunc.pod
-# and friends.
-#
-#
-# TODO:
-#
-# Cache directories read during sloppy match
-!NO!SUBS!
close OUT or die "Can't close $file: $!";
chmod 0755, $file or die "Can't reset permissions for $file: $!\n";
exec("$Config{'eunicefix'} $file") if $Config{'eunicefix'} ne ':';
chdir $origdir;
+