Re: 5.6.1 darwin Configure fails to extract Makefile

[p5sagit/p5-mst-13.2.git] / utils / perlbug.PL

diff --git a/utils/perlbug.PL b/utils/perlbug.PL
index 6c92254..c4289f8 100644 (file)
--- a/utils/perlbug.PL
+++ b/utils/perlbug.PL
@@ -91,7 +91,7 @@ BEGIN {
     $::HaveUtil = ($@ eq "");
 };
 
-my $Version = "1.32";
+my $Version = "1.33";
 
 # Changed in 1.06 to skip Mail::Send and Mail::Util if not available.
 # Changed in 1.07 to see more sendmail execs, and added pipe output.
@@ -128,6 +128,7 @@ my $Version = "1.32";
 # Changed in 1.30 Added warnings on failure to open files MSTEVENS 13-07-2000
 # Changed in 1.31 Add checks on close().Fix my $var unless. TJENNESS 26-07-2000
 # Changed in 1.32 Use File::Spec->tmpdir TJENNESS 20-08-2000
+# Changed in 1.33 Don't require -t STDOUT for -ok.
 
 # TODO: - Allow the user to re-name the file on mail failure, and
 #       make sure failure (transmission-wise) of Mail::Send is
@@ -153,7 +154,6 @@ include a file, you can use the -f switch.
 EOF
     die "\n";
 }
-if (!-t STDOUT && !$outfile) { Dump(*STDOUT); exit; }
 
 Query();
 Edit() unless $usefile || ($ok and not $::opt_n);
@@ -215,7 +215,7 @@ sub Init {
         MacPerl::Ask('Provide command-line args here (-h for help):')
         if $Is_MacOS && $MacPerl::Version =~ /App/;
 
-    if (!getopts("dhva:s:b:f:F:r:e:SCc:to:n:")) { Help(); exit; };
+    if (!getopts("Adhva:s:b:f:F:r:e:SCc:to:n:")) { Help(); exit; };
 
     # This comment is needed to notify metaconfig that we are
     # using the $perladmin, $cf_by, and $cf_time definitions.
@@ -574,6 +574,13 @@ sub Dump {
 Flags:
     category=$category
     severity=$severity
+EFF
+    if ($::opt_A) {
+       print OUT <<EFF;
+    ack=no
+EFF
+    }
+    print OUT <<EFF;
 ---
 EFF
     print OUT "This perlbug was built using Perl $config_tag1\n",
@@ -724,10 +731,11 @@ EOF
            chop $action;
 
            if ($action =~ /^(f|sa)/i) { # <F>ile/<Sa>ve
-               print "\n\nName of file to save message in [perlbug.rep]: ";
+               my $file_save = $outfile || "perlbug.rep";
+               print "\n\nName of file to save message in [$file_save]: ";
                my $file = scalar <>;
                chop $file;
-               $file = "perlbug.rep" if $file eq "";
+               $file = $file_save if $file eq "";
 
                unless (open(FILE, ">$file")) {
                    print "\nError opening $file: $!\n\n";
@@ -769,7 +777,7 @@ EOF
                Edit();
            } elsif ($action =~ /^[qc]/i) { # <C>ancel, <Q>uit
                Cancel();
-           } elsif ($action =~ /^s/) {
+           } elsif ($action =~ /^s/i) {
                paraprint <<EOF;
 I'm sorry, but I didn't understand that. Please type "send" or "save".
 EOF
@@ -837,7 +845,7 @@ report. We apologize for the inconvenience.
 So you may attempt to find some way of sending your message, it has
 been left in the file `$filename'.
 EOF
-       open(SENDMAIL, "|$sendmail -t") || die "'|$sendmail -t' failed: $!";
+       open(SENDMAIL, "|$sendmail -t -oi") || die "'|$sendmail -t -oi' failed: $!";
 sendout:
        print SENDMAIL "To: $address\n";
        print SENDMAIL "Subject: $subject\n";
@@ -867,7 +875,7 @@ be needed.
 Usage:
 $0  [-v] [-a address] [-s subject] [-b body | -f inpufile ] [ -F outputfile ]
     [-r returnaddress] [-e editor] [-c adminaddress | -C] [-S] [-t] [-h]
-$0  [-v] [-r returnaddress] [-ok | -okay | -nok | -nokay]
+$0  [-v] [-r returnaddress] [-A] [-ok | -okay | -nok | -nokay]
 
 Simplest usage:  run "$0", and follow the prompts.
 
@@ -889,9 +897,9 @@ Options:
         this if you don't give it here.
   -e    Editor to use.
   -t    Test mode. The target address defaults to `$testaddress'.
-  -d    Data mode (the default if you redirect or pipe output.)
-        This prints out your configuration data, without mailing
+  -d    Data mode.  This prints out your configuration data, without mailing
         anything. You can use this with -v to get more complete data.
+  -A    Don't send a bug received acknowledgement to the return address.
   -ok   Report successful build on this system to perl porters
         (use alone or with -v). Only use -ok if *everything* was ok:
         if there were *any* problems at all, use -nok.
@@ -939,10 +947,10 @@ B<perlbug> S<[ B<-v> ]> S<[ B<-a> I<address> ]> S<[ B<-s> I<subject> ]>
 S<[ B<-b> I<body> | B<-f> I<inputfile> ]> S<[ B<-F> I<outputfile> ]>
 S<[ B<-r> I<returnaddress> ]>
 S<[ B<-e> I<editor> ]> S<[ B<-c> I<adminaddress> | B<-C> ]>
-S<[ B<-S> ]> S<[ B<-t> ]>  S<[ B<-d> ]>  S<[ B<-h> ]>
+S<[ B<-S> ]> S<[ B<-t> ]>  S<[ B<-d> ]>  S<[ B<-A> ]>  S<[ B<-h> ]>
 
 B<perlbug> S<[ B<-v> ]> S<[ B<-r> I<returnaddress> ]>
-S<[ B<-ok> | B<-okay> | B<-nok> | B<-nokay> ]>
+ S<[ B<-A> ]> S<[ B<-ok> | B<-okay> | B<-nok> | B<-nokay> ]>
 
 =head1 DESCRIPTION
 
@@ -1087,6 +1095,13 @@ version of perl comes out and your bug is still present.
 
 Address to send the report to.  Defaults to `perlbug@perl.org'.
 
+=item B<-A>
+
+Don't send a bug received acknowledgement to the reply address.
+Generally it is only a sensible to use this option if you are a
+perl maintainer actively watching perl porters for your message to
+arrive.
+
 =item B<-b>
 
 Body of the report.  If not included on the command line, or