use Config;
use File::Spec;
-plan tests => 74;
+plan tests => 95;
my $Perl = which_perl();
$Is_Amiga = $^O eq 'amigaos';
$Is_Cygwin = $^O eq 'cygwin';
+$Is_Darwin = $^O eq 'darwin';
$Is_Dos = $^O eq 'dos';
+$Is_MacOS = $^O eq 'MacOS';
$Is_MPE = $^O eq 'mpeix';
$Is_MSWin32 = $^O eq 'MSWin32';
$Is_NetWare = $^O eq 'NetWare';
$Is_OS2 = $^O eq 'os2';
$Is_Solaris = $^O eq 'solaris';
$Is_VMS = $^O eq 'VMS';
+$Is_DGUX = $^O eq 'dgux';
+$Is_MPRAS = $^O =~ /svr4/ && -f '/etc/.relid';
+$Is_Rhapsody= $^O eq 'rhapsody';
$Is_Dosish = $Is_Dos || $Is_OS2 || $Is_MSWin32 || $Is_NetWare || $Is_Cygwin;
+$Is_UFS = $Is_Darwin && (() = `df -t ufs . 2>/dev/null`) == 2;
+
my($DEV, $INO, $MODE, $NLINK, $UID, $GID, $RDEV, $SIZE,
$ATIME, $MTIME, $CTIME, $BLKSIZE, $BLOCKS) = (0..12);
my $tmpfile = 'Op_stat.tmp';
my $tmpfile_link = $tmpfile.'2';
-
-unlink $tmpfile;
+chmod 0666, $tmpfile;
+1 while unlink $tmpfile;
open(FOO, ">$tmpfile") || DIE("Can't open temp test file: $!");
close FOO;
open(FOO, ">$tmpfile") || DIE("Can't open temp test file: $!");
my($nlink, $mtime, $ctime) = (stat(FOO))[$NLINK, $MTIME, $CTIME];
+
+#VMS Fix-me: nlink should work on VMS if applicable link support configured.
SKIP: {
skip "No link count", 1 if $Is_VMS;
SKIP: {
skip "mtime and ctime not reliable", 2
- if $Is_MSWin32 or $Is_NetWare or $Is_Cygwin or $Is_Dos;
+ if $Is_MSWin32 or $Is_NetWare or $Is_Cygwin or $Is_Dos or $Is_MacOS or $Is_Darwin;
ok( $mtime, 'mtime' );
is( $mtime, $ctime, 'mtime == ctime' );
print FOO "Now is the time for all good men to come to.\n";
close(FOO);
-sleep 2 unless $funky_FAT_timestamps;
+sleep 2;
SKIP: {
# no ctime concept $ctime is ALWAYS == $mtime
# expect netware to be the same ...
skip "No ctime concept on this OS", 2
- if $Is_MSWin32;
+ if $Is_MSWin32 ||
+ ($Is_Darwin && $Is_UFS);
+
if( !ok($mtime, 'hard link mtime') ||
!isnt($mtime, $ctime, 'hard link ctime != mtime') ) {
- print <<DIAG;
+ print STDERR <<DIAG;
# Check if you are on a tmpfs of some sort. Building in /tmp sometimes
-# has this problem. Also building on the ClearCase VOBS filesystem may
+# has this problem. Building on the ClearCase VOBS filesystem may also
# cause this failure.
-# Darwins UFS doesn't have a ctime concept, and thus is
-# expected to fail this test.
+#
+# Darwin's UFS doesn't have a ctime concept, and thus is expected to fail
+# this test.
DIAG
}
}
# truncate and touch $tmpfile.
open(F, ">$tmpfile") || DIE("Can't open temp test file: $!");
+ok(-z \*F, '-z on empty filehandle');
+ok(! -s \*F, ' and -s');
close F;
ok(-z $tmpfile, '-z on empty file');
print F "hi\n";
close F;
+open(F, "<$tmpfile") || DIE("Can't open temp test file: $!");
+ok(!-z *F, '-z on empty filehandle');
+ok( -s *F, ' and -s');
+close F;
+
ok(! -z $tmpfile, '-z on non-empty file');
ok(-s $tmpfile, ' and -s');
-
-# in ms windows, $tmpfile inherits owner uid from directory
-# not sure about os/2, but chown is harmless anyway
-eval { chown $>,$tmpfile; 1 } or print "# $@" ;
-
ok(chmod(0700,$tmpfile), 'chmod 0700');
ok(-r $tmpfile, ' -r');
ok(-w $tmpfile, ' -w');
SKIP: {
- skip "-x simply determins if a file ends in an executable suffix", 1
- if $Is_Dosish;
+ skip "-x simply determines if a file ends in an executable suffix", 1
+ if $Is_Dosish || $Is_MacOS;
ok(-x $tmpfile, ' -x');
}
ok(! -e $tmpfile_link, ' -e on unlinked file');
SKIP: {
- skip "No character, socket or block special files", 3
+ skip "No character, socket or block special files", 6
if $Is_MSWin32 || $Is_NetWare || $Is_Dos;
- skip "/dev isn't available to test against", 3
+ skip "/dev isn't available to test against", 6
unless -d '/dev' && -r '/dev' && -x '/dev';
+ skip "Skipping: unexpected ls output in MP-RAS", 6
+ if $Is_MPRAS;
+
+ # VMS problem: If GNV or other UNIX like tool is installed, then
+ # sometimes Perl will find /bin/ls, and will try to run it.
+ # But since Perl on VMS does not know to run it under Bash, it will
+ # try to run the DCL verb LS. And if the VMS product Language
+ # Sensitive Editor is installed, or some other LS verb, that will
+ # be run instead. So do not do this until we can teach Perl
+ # when to use BASH on VMS.
+ skip "ls command not available to Perl in OpenVMS right now.", 6
+ if $Is_VMS;
my $LS = $Config{d_readlink} ? "ls -lL" : "ls -l";
my $CMD = "$LS /dev 2>/dev/null";
my $DEV = qx($CMD);
- skip "$CMD failed", 3 if $DEV eq '';
+ skip "$CMD failed", 6 if $DEV eq '';
my @DEV = do { my $dev; opendir($dev, "/dev") ? readdir($dev) : () };
- skip "opendir failed: $!", 3 if @DEV == 0;
+ skip "opendir failed: $!", 6 if @DEV == 0;
# /dev/stdout might be either character special or a named pipe,
# or a symlink, or a socket, depending on which OS and how are
$DEV =~ s{^.+?\s\..+?$}{}m;
@DEV = grep { ! m{^\..+$} } @DEV;
+ # Irix ls -l marks sockets with 'S' while 's' is a 'XENIX semaphore'.
+ if ($^O eq 'irix') {
+ $DEV =~ s{^S(.+?)}{s$1}mg;
+ }
+
my $try = sub {
my @c1 = eval qq[\$DEV =~ /^$_[0].*/mg];
my @c2 = eval qq[grep { $_[1] "/dev/\$_" } \@DEV];
is($c1, $c2, "ls and $_[1] agreeing on /dev ($c1 $c2)");
};
+SKIP: {
+ skip("DG/UX ls -L broken", 3) if $Is_DGUX;
+
$try->('b', '-b');
$try->('c', '-c');
$try->('s', '-S');
+
}
ok(! -b $Curdir, '!-b cwd');
ok(! -c $Curdir, '!-c cwd');
ok(! -S $Curdir, '!-S cwd');
+}
+
SKIP: {
my($cnt, $uid);
$cnt = $uid = 0;
SKIP: {
skip "These tests require a TTY", 4 if $ENV{PERL_SKIP_TTY_TEST};
- my $TTY = $^O eq 'rhapsody' ? "/dev/ttyp0" : "/dev/tty";
+ my $TTY = $Is_Rhapsody ? "/dev/ttyp0" : "/dev/tty";
SKIP: {
skip "Test uses unixisms", 2 if $Is_MSWin32 || $Is_NetWare;
# These aren't strictly "stat" calls, but so what?
+my $statfile = File::Spec->catfile($Curdir, 'op', 'stat.t');
+ok( -T $statfile, '-T');
+ok(! -B $statfile, '!-B');
-ok(-T 'op/stat.t', '-T');
-ok(! -B 'op/stat.t', '!-B');
-
+SKIP: {
+ skip("DG/UX", 1) if $Is_DGUX;
ok(-B $Perl, '-B');
+}
+
ok(! -T $Perl, '!-T');
-open(FOO,'op/stat.t');
+open(FOO,$statfile);
SKIP: {
eval { -T FOO; };
skip "-T/B on filehandle not implemented", 15 if $@ =~ /not implemented/;
ok(! -B FOO, ' !-B');
$_ = <FOO>;
- ok(/perl/, 'after readline');
+ like($_, qr/perl/, 'after readline');
ok(-T FOO, ' still -T');
ok(! -B FOO, ' still -B');
close(FOO);
- open(FOO,'op/stat.t');
+ open(FOO,$statfile);
$_ = <FOO>;
- ok(/perl/, 'reopened and after readline');
+ like($_, qr/perl/, 'reopened and after readline');
ok(-T FOO, ' still -T');
ok(! -B FOO, ' still !-B');
unlink $tmpfile or print "# unlink failed: $!\n";
# bug id 20011101.069
-my @r = \stat(".");
+my @r = \stat($Curdir);
is(scalar @r, 13, 'stat returns full 13 elements');
+stat $0;
+eval { lstat _ };
+like( $@, qr/^The stat preceding lstat\(\) wasn't an lstat/,
+ 'lstat _ croaks after stat' );
+eval { -l _ };
+like( $@, qr/^The stat preceding -l _ wasn't an lstat/,
+ '-l _ croaks after stat' );
+
+lstat $0;
+eval { lstat _ };
+is( "$@", "", "lstat _ ok after lstat" );
+eval { -l _ };
+is( "$@", "", "-l _ ok after lstat" );
+
SKIP: {
skip "No lstat", 2 unless $Config{d_lstat};
- stat $0;
- eval { lstat _ };
- ok( $@ =~ /^The stat preceding lstat\(\) wasn't an lstat/,
- 'lstat _ croaks after stat' );
- eval { -l _ };
- ok( $@ =~ /^The stat preceding -l _ wasn't an lstat/,
- '-l _ croaks after stat' );
-
- eval { lstat STDIN };
- ok( $@ =~ /^The stat preceding lstat\(\) wasn't an lstat/,
- 'lstat FILEHANDLE croaks' );
-
# bug id 20020124.004
# If we have d_lstat, we should have symlink()
my $linkname = 'dolzero';
lstat $linkname;
-T _;
eval { lstat _ };
- ok( $@ =~ /^The stat preceding lstat\(\) wasn't an lstat/,
+ like( $@, qr/^The stat preceding lstat\(\) wasn't an lstat/,
'lstat croaks after -T _' );
eval { -l _ };
- ok( $@ =~ /^The stat preceding -l _ wasn't an lstat/,
+ like( $@, qr/^The stat preceding -l _ wasn't an lstat/,
'-l _ croaks after -T _' );
unlink $linkname or print "# unlink $linkname failed: $!\n";
}
+
+print "# Zzz...\n";
+sleep(3);
+my $f = 'tstamp.tmp';
+unlink $f;
+ok (open(S, "> $f"), 'can create tmp file');
+close S or die;
+my @a = stat $f;
+print "# time=$^T, stat=(@a)\n";
+my @b = (-M _, -A _, -C _);
+print "# -MAC=(@b)\n";
+ok( (-M _) < 0, 'negative -M works');
+ok( (-A _) < 0, 'negative -A works');
+ok( (-C _) < 0, 'negative -C works');
+ok(unlink($f), 'unlink tmp file');
+
+{
+ ok(open(F, ">", $tmpfile), 'can create temp file');
+ close F;
+ chmod 0077, $tmpfile;
+ my @a = stat($tmpfile);
+ my $s1 = -s _;
+ -T _;
+ my $s2 = -s _;
+ is($s1, $s2, q(-T _ doesn't break the statbuffer));
+ unlink $tmpfile;
+}
+
+SKIP: {
+ skip "No dirfd()", 3 unless $Config{d_dirfd};
+ ok(opendir(DIR, "."), 'Can open "." dir') || diag "Can't open '.': $!";
+ ok(stat(DIR), "stat() on dirhandle works");
+ ok(-d -r _ , "chained -x's on dirhandle");
+ closedir DIR;
+}
+
+{
+ # RT #8244: *FILE{IO} does not behave like *FILE for stat() and -X() operators
+ ok(open(F, ">", $tmpfile), 'can create temp file');
+ my @thwap = stat *F{IO};
+ ok(@thwap, "stat(*F{IO}) works");
+ ok( -f *F{IO} , "single file tests work with *F{IO}");
+ close F;
+ unlink $tmpfile;
+
+ #PVIO's hold dirhandle information, so let's test them too.
+
+ SKIP: {
+ skip "No dirfd()", 3 unless $Config{d_dirfd};
+ ok(opendir(DIR, "."), 'Can open "." dir') || diag "Can't open '.': $!";
+ ok(stat(*DIR{IO}), "stat() on *DIR{IO} works");
+ ok(-d -r *DIR{IO} , "chained -x's on *DIR{IO}");
+ closedir DIR;
+ }
+}
+
+END {
+ chmod 0666, $tmpfile;
+ 1 while unlink $tmpfile;
+}