+# NOTE: this file tests how large files (>2GB) work with perlio (stdio/sfio).
+# sysopen(), sysseek(), syswrite(), sysread() are tested in t/lib/syslfs.t.
+# If you modify/add tests here, remember to update also t/lib/syslfs.t.
+
BEGIN {
- eval { pack "q", 0 };
- if ($@) {
- print "1..0\n# no 64-bit types\n";
- bitedust();
+ chdir 't' if -d 't';
+ unshift @INC, '../lib';
+ # Don't bother if there are no quad offsets.
+ require Config; import Config;
+ if ($Config{lseeksize} < 8) {
+ print "1..0\n# no 64-bit file offsets\n";
+ exit(0);
}
}
-sub bye {
+sub zap {
close(BIG);
- unlink "big";
+ unlink("big");
+ unlink("big1");
+ unlink("big2");
+}
+
+sub bye {
+ zap();
exit(0);
}
-# First try to figure out whether we have sparse files.
+sub explain {
+ print <<EOM;
+#
+# If the lfs (large file support: large meaning larger than two gigabytes)
+# tests are skipped or fail, it may mean either that your process
+# (or process group) is not allowed to write large files (resource
+# limits) or that the file system you are running the tests on doesn't
+# let your user/group have large files (quota) or the filesystem simply
+# doesn't support large files. You may even need to reconfigure your kernel.
+# (This is all very operating system and site-dependent.)
+#
+# Perl may still be able to support large files, once you have
+# such a process, enough quota, and such a (file) system.
+#
+EOM
+}
+
+print "# checking whether we have sparse files...\n";
+# Known have-nots.
if ($^O eq 'win32' || $^O eq 'vms') {
- print "1..0\n# no sparse files\n";
+ print "1..0\n# no sparse files (because this is $^O) \n";
bye();
}
-my $SEEK_SET;
-my $SEEK_CUR;
-my $SEEK_END;
+# Known haves that have problems running this test
+# (for example because they do not support sparse files, like UNICOS)
+if ($^O eq 'unicos') {
+ print "1..0\n# large files known to work but unable to test them here ($^O)\n";
+ bye();
+}
-# We probe for the constants 'manually' because
-# we do not want to be dependent on any extensions.
+# Then try to heuristically deduce whether we have sparse files.
-sub seek_it {
- my ($set, $cur, $end) = @_;
+# Let's not depend on Fcntl or any other extension.
- my $test = 0;
+my ($SEEK_SET, $SEEK_CUR, $SEEK_END) = (0, 1, 2);
- open(BIG, ">big") || do { warn "open failed: $!\n"; bye };
- binmode BIG;
- seek(BIG, 49, $set);
- print BIG "X";
- close(BIG);
- open(BIG, "big") || do { warn "open failed: $!\n"; bye };
- seek(BIG, 50, $set);
- if (tell(BIG) == 50) {
- seek(BIG, -10, $cur);
- if (tell(BIG) == 40) {
- seek(BIG, -20, $end);
- if (tell(BIG) == 30) {
- $test = 1;
- }
- }
- }
- close(BIG);
+# We'll start off by creating a one megabyte file which has
+# only three "true" bytes. If we have sparseness, we should
+# consume less blocks than one megabyte (assuming nobody has
+# one megabyte blocks...)
- return $test;
-}
+open(BIG, ">big1") or
+ do { warn "open big1 failed: $!\n"; bye };
+binmode(BIG) or
+ do { warn "binmode big1 failed: $!\n"; bye };
+seek(BIG, 1_000_000, $SEEK_SET) or
+ do { warn "seek big1 failed: $!\n"; bye };
+print BIG "big" or
+ do { warn "print big1 failed: $!\n"; bye };
+close(BIG) or
+ do { warn "close big1 failed: $!\n"; bye };
-if (seek_it(0, 1, 2)) {
- ($SEEK_SET, $SEEK_CUR, $SEEK_END) = (0, 1, 2);
-} elsif (seek_it(1, 2, 3)) {
- ($SEEK_SET, $SEEK_CUR, $SEEK_END) = (1, 2, 3);
-} else {
- print "1..0\n# no way to seek\n";
- bye;
-}
+my @s1 = stat("big1");
-print "# SEEK_SET = $SEEK_SET, SEEK_CUR = $SEEK_CUR, SEEK_END = $SEEK_END\n";
+print "# s1 = @s1\n";
-open(BIG, ">big") || do { warn "open failed: $!\n"; bye };
-binmode BIG;
-seek(BIG, 100_000, $SEEK_SET);
-print BIG "big";
-close(BIG);
+open(BIG, ">big2") or
+ do { warn "open big2 failed: $!\n"; bye };
+binmode(BIG) or
+ do { warn "binmode big2 failed: $!\n"; bye };
+seek(BIG, 2_000_000, $SEEK_SET) or
+ do { warn "seek big2 failed; $!\n"; bye };
+print BIG "big" or
+ do { warn "print big2 failed; $!\n"; bye };
+close(BIG) or
+ do { warn "close big2 failed; $!\n"; bye };
-my @s;
+my @s2 = stat("big2");
-@s = stat("big");
+print "# s2 = @s2\n";
-unless (@s == 13 &&
- $s[7] == 100_003 &&
- defined $s[11] &&
- defined $s[12] &&
- $s[11] * $s[12] < 100_003) {
- print "1..0\n# no sparse files\n";
- bye();
+zap();
+
+unless ($s1[7] == 1_000_003 && $s2[7] == 2_000_003 &&
+ $s1[11] == $s2[11] && $s1[12] == $s2[12]) {
+ print "1..0\n#no sparse files?\n";
+ bye;
}
+print "# we seem to have sparse files...\n";
+
# By now we better be sure that we do have sparse files:
# if we are not, the following will hog 5 gigabytes of disk. Ooops.
-print "1..8\n";
+$ENV{LC_ALL} = "C";
-open(BIG, ">big") || do { warn "open failed: $!\n"; bye };
+open(BIG, ">big") or do { warn "open failed: $!\n"; bye };
binmode BIG;
-seek(BIG, 5_000_000_000, $SEEK_SET);
-print BIG "big";
-close BIG;
+unless (seek(BIG, 5_000_000_000, $SEEK_SET)) {
+ print "1..0\n# seeking past 2GB failed: $!\n";
+ explain();
+ bye();
+}
+
+# Either the print or (more likely, thanks to buffering) the close will
+# fail if there are are filesize limitations (process or fs).
+my $print = print BIG "big";
+print "# print failed: $!\n" unless $print;
+my $close = close BIG;
+print "# close failed: $!\n" unless $close;
+unless ($print && $close) {
+ if ($! =~/too large/i) {
+ print "1..0\n# writing past 2GB failed: process limits?\n";
+ } elsif ($! =~ /quota/i) {
+ print "1..0\n# filesystem quota limits?\n";
+ }
+ explain();
+ bye();
+}
@s = stat("big");
-print "not " unless $s[7] == 5_000_000_003;
+print "# @s\n";
+
+unless ($s[7] == 5_000_000_003) {
+ print "1..0\n# not configured to use large files?\n";
+ explain();
+ bye();
+}
+
+sub fail () {
+ print "not ";
+ $fail++;
+}
+
+print "1..17\n";
+
+my $fail = 0;
+
+fail unless $s[7] == 5_000_000_003; # exercizes pp_stat
print "ok 1\n";
-print "not " unless -s "big" == 5_000_000_003;
+fail unless -s "big" == 5_000_000_003; # exercizes pp_ftsize
print "ok 2\n";
-open(BIG, "big") || do { warn "open failed: $!\n"; bye };
+fail unless -e "big";
+print "ok 3\n";
+
+fail unless -f "big";
+print "ok 4\n";
+
+open(BIG, "big") or do { warn "open failed: $!\n"; bye };
binmode BIG;
-seek(BIG, 4_500_000_000, $SEEK_SET);
+fail unless seek(BIG, 4_500_000_000, $SEEK_SET);
+print "ok 5\n";
-print "not " unless tell(BIG) == 4_500_000_000;
-print "ok 3\n";
+fail unless tell(BIG) == 4_500_000_000;
+print "ok 6\n";
-seek(BIG, 1, $SEEK_CUR);
+fail unless seek(BIG, 1, $SEEK_CUR);
+print "ok 7\n";
-print "not " unless tell(BIG) == 4_500_000_001;
-print "ok 4\n";
+fail unless tell(BIG) == 4_500_000_001;
+print "ok 8\n";
-seek(BIG, -1, $SEEK_CUR);
+fail unless seek(BIG, -1, $SEEK_CUR);
+print "ok 9\n";
-print "not " unless tell(BIG) == 4_500_000_000;
-print "ok 5\n";
+fail unless tell(BIG) == 4_500_000_000;
+print "ok 10\n";
-seek(BIG, -3, $SEEK_END);
+fail unless seek(BIG, -3, $SEEK_END);
+print "ok 11\n";
-print "not " unless tell(BIG) == 5_000_000_000;
-print "ok 6\n";
+fail unless tell(BIG) == 5_000_000_000;
+print "ok 12\n";
my $big;
-print "not " unless read(BIG, $big, 3) == 3;
-print "ok 7\n";
+fail unless read(BIG, $big, 3) == 3;
+print "ok 13\n";
-print "not " unless $big eq "big";
-print "ok 8\n";
+fail unless $big eq "big";
+print "ok 14\n";
-bye();
+# 705_032_704 = (I32)5_000_000_000
+fail unless seek(BIG, 705_032_704, $SEEK_SET);
+print "ok 15\n";
-# eof
+my $zero;
+fail unless read(BIG, $zero, 3) == 3;
+print "ok 16\n";
+fail unless $zero eq "\0\0\0";
+print "ok 17\n";
+
+explain if $fail;
+
+bye(); # does the necessary cleanup
+
+END {
+ unlink "big"; # be paranoid about leaving 5 gig files lying around
+}
+
+# eof