# NOTE: this file tests how large files (>2GB) work with perlio (stdio/sfio).
# sysopen(), sysseek(), syswrite(), sysread() are tested in t/lib/syslfs.t.
-# If you modify/add tests here, remember to update also t/lib/syslfs.t.
+# If you modify/add tests here, remember to update also ext/Fcntl/t/syslfs.t.
BEGIN {
chdir 't' if -d 't';
- unshift @INC, '../lib';
+ @INC = '../lib';
# Don't bother if there are no quad offsets.
require Config; import Config;
if ($Config{lseeksize} < 8) {
- print "1..0\n# no 64-bit file offsets\n";
+ print "1..0 # Skip: no 64-bit file offsets\n";
exit(0);
}
+ require './test.pl';
}
-sub bye {
+use strict;
+
+our @s;
+our $fail;
+
+my $big0 = tempfile();
+my $big1 = tempfile();
+my $big2 = tempfile();
+
+sub zap {
close(BIG);
- unlink "big";
+}
+
+sub bye {
+ zap();
exit(0);
}
+my $explained;
+
sub explain {
- print <<EOM;
+ unless ($explained++) {
+ print <<EOM;
#
-# If the lfs (large file support: large meaning larger than two gigabytes)
-# tests are skipped or fail, it may mean either that your process
-# (or process group) is not allowed to write large files (resource
-# limits) or that the file system you are running the tests on doesn't
-# let your user/group have large files (quota) or the filesystem simply
-# doesn't support large files. You may even need to reconfigure your kernel.
-# (This is all very operating system and site-dependent.)
+# If the lfs (large file support: large meaning larger than two
+# gigabytes) tests are skipped or fail, it may mean either that your
+# process (or process group) is not allowed to write large files
+# (resource limits) or that the file system (the network filesystem?)
+# you are running the tests on doesn't let your user/group have large
+# files (quota) or the filesystem simply doesn't support large files.
+# You may even need to reconfigure your kernel. (This is all very
+# operating system and site-dependent.)
#
# Perl may still be able to support large files, once you have
# such a process, enough quota, and such a (file) system.
+# It is just that the test failed now.
#
EOM
+ }
+ print "1..0 # Skip: @_\n" if @_;
}
+$| = 1;
+
+print "# checking whether we have sparse files...\n";
+
# Known have-nots.
-if ($^O eq 'win32' || $^O eq 'vms') {
- print "1..0\n# no sparse files\n";
+if ($^O eq 'MSWin32' || $^O eq 'NetWare' || $^O eq 'VMS') {
+ print "1..0 # Skip: no sparse files in $^O\n";
bye();
}
# Known haves that have problems running this test
# (for example because they do not support sparse files, like UNICOS)
if ($^O eq 'unicos') {
- print "1..0\n# large files known to work but unable to test them here\n";
+ print "1..0 # Skip: no sparse files in $^O, unable to test large files\n";
bye();
}
-# Then try to deduce whether we have sparse files.
+# Then try to heuristically deduce whether we have sparse files.
# Let's not depend on Fcntl or any other extension.
# consume less blocks than one megabyte (assuming nobody has
# one megabyte blocks...)
-open(BIG, ">big") or do { warn "open failed: $!\n"; bye };
-binmode BIG;
-seek(BIG, 1_000_000, $SEEK_SET);
-print BIG "big";
-close(BIG);
-
-my @s;
-
-@s = stat("big");
-
-print "# @s\n";
-
-my $BLOCKSIZE = $s[11] || 512;
-
-unless (@s == 13 &&
- $s[7] == 1_000_003 &&
- defined $s[12] &&
- $BLOCKSIZE * $s[12] < 1_000_003) {
- print "1..0\n# no sparse files?\n";
- bye();
+open(BIG, ">$big1") or
+ do { warn "open $big1 failed: $!\n"; bye };
+binmode(BIG) or
+ do { warn "binmode $big1 failed: $!\n"; bye };
+seek(BIG, 1_000_000, $SEEK_SET) or
+ do { warn "seek $big1 failed: $!\n"; bye };
+print BIG "big" or
+ do { warn "print $big1 failed: $!\n"; bye };
+close(BIG) or
+ do { warn "close $big1 failed: $!\n"; bye };
+
+my @s1 = stat($big1);
+
+print "# s1 = @s1\n";
+
+open(BIG, ">$big2") or
+ do { warn "open $big2 failed: $!\n"; bye };
+binmode(BIG) or
+ do { warn "binmode $big2 failed: $!\n"; bye };
+seek(BIG, 2_000_000, $SEEK_SET) or
+ do { warn "seek $big2 failed; $!\n"; bye };
+print BIG "big" or
+ do { warn "print $big2 failed; $!\n"; bye };
+close(BIG) or
+ do { warn "close $big2 failed; $!\n"; bye };
+
+my @s2 = stat($big2);
+
+print "# s2 = @s2\n";
+
+zap();
+
+unless ($s1[7] == 1_000_003 && $s2[7] == 2_000_003 &&
+ $s1[11] == $s2[11] && $s1[12] == $s2[12]) {
+ print "1..0 # Skip: no sparse files?\n";
+ bye;
}
+print "# we seem to have sparse files...\n";
+
# By now we better be sure that we do have sparse files:
# if we are not, the following will hog 5 gigabytes of disk. Ooops.
+# This may fail by producing some signal; run in a subprocess first for safety
$ENV{LC_ALL} = "C";
-open(BIG, ">big") or do { warn "open failed: $!\n"; bye };
+my $r = system '../perl', '-e', <<'EOF';
+open(BIG, ">$big0");
+seek(BIG, 5_000_000_000, 0);
+print BIG $big0;
+exit 0;
+EOF
+
+open(BIG, ">$big0") or do { warn "open failed: $!\n"; bye };
binmode BIG;
-seek(BIG, 5_000_000_000, $SEEK_SET);
+if ($r or not seek(BIG, 5_000_000_000, $SEEK_SET)) {
+ my $err = $r ? 'signal '.($r & 0x7f) : $!;
+ explain("seeking past 2GB failed: $err");
+ bye();
+}
# Either the print or (more likely, thanks to buffering) the close will
# fail if there are are filesize limitations (process or fs).
my $print = print BIG "big";
-my $close = close BIG if $print;
+print "# print failed: $!\n" unless $print;
+my $close = close BIG;
+print "# close failed: $!\n" unless $close;
unless ($print && $close) {
- unless ($print) {
- print "# print failed: $!\n"
- } else {
- print "# close failed: $!\n"
- }
if ($! =~/too large/i) {
- print "1..0\n# writing past 2GB failed: process limits?\n";
+ explain("writing past 2GB failed: process limits?");
} elsif ($! =~ /quota/i) {
- print "1..0\n# filesystem quota limits?\n";
+ explain("filesystem quota limits?");
+ } else {
+ explain("error: $!");
}
- explain();
bye();
}
-@s = stat("big");
+@s = stat($big0);
print "# @s\n";
unless ($s[7] == 5_000_000_003) {
- print "1..0\n# not configured to use large files?\n";
- explain();
+ explain("kernel/fs not configured to use large files?");
bye();
}
-sub fail () {
+sub fail {
print "not ";
$fail++;
}
+sub offset ($$) {
+ my ($offset_will_be, $offset_want) = @_;
+ my $offset_is = eval $offset_will_be;
+ unless ($offset_is == $offset_want) {
+ print "# bad offset $offset_is, want $offset_want\n";
+ my ($offset_func) = ($offset_will_be =~ /^(\w+)/);
+ if (unpack("L", pack("L", $offset_want)) == $offset_is) {
+ print "# 32-bit wraparound suspected in $offset_func() since\n";
+ print "# $offset_want cast into 32 bits equals $offset_is.\n";
+ } elsif ($offset_want - unpack("L", pack("L", $offset_want)) - 1
+ == $offset_is) {
+ print "# 32-bit wraparound suspected in $offset_func() since\n";
+ printf "# %s - unpack('L', pack('L', %s)) - 1 equals %s.\n",
+ $offset_want,
+ $offset_want,
+ $offset_is;
+ }
+ fail;
+ }
+}
+
print "1..17\n";
-my $fail = 0;
+$fail = 0;
fail unless $s[7] == 5_000_000_003; # exercizes pp_stat
print "ok 1\n";
-fail unless -s "big" == 5_000_000_003; # exercizes pp_ftsize
+fail unless -s $big0 == 5_000_000_003; # exercizes pp_ftsize
print "ok 2\n";
-fail unless -e "big";
+fail unless -e $big0;
print "ok 3\n";
-fail unless -f "big";
+fail unless -f $big0;
print "ok 4\n";
-open(BIG, "big") or do { warn "open failed: $!\n"; bye };
+open(BIG, $big0) or do { warn "open failed: $!\n"; bye };
binmode BIG;
fail unless seek(BIG, 4_500_000_000, $SEEK_SET);
print "ok 5\n";
-fail unless tell(BIG) == 4_500_000_000;
+offset('tell(BIG)', 4_500_000_000);
print "ok 6\n";
fail unless seek(BIG, 1, $SEEK_CUR);
print "ok 7\n";
-fail unless tell(BIG) == 4_500_000_001;
+# If you get 205_032_705 from here it means that
+# your tell() is returning 32-bit values since (I32)4_500_000_001
+# is exactly 205_032_705.
+offset('tell(BIG)', 4_500_000_001);
print "ok 8\n";
fail unless seek(BIG, -1, $SEEK_CUR);
print "ok 9\n";
-fail unless tell(BIG) == 4_500_000_000;
+offset('tell(BIG)', 4_500_000_000);
print "ok 10\n";
fail unless seek(BIG, -3, $SEEK_END);
print "ok 11\n";
-fail unless tell(BIG) == 5_000_000_000;
+offset('tell(BIG)', 5_000_000_000);
print "ok 12\n";
my $big;
print "ok 14\n";
# 705_032_704 = (I32)5_000_000_000
+# See that we don't have "big" in the 705_... spot:
+# that would mean that we have a wraparound.
fail unless seek(BIG, 705_032_704, $SEEK_SET);
print "ok 15\n";
fail unless $zero eq "\0\0\0";
print "ok 17\n";
-explain if $fail;
+explain() if $fail;
bye(); # does the necessary cleanup
END {
- unlink "big"; # be paranoid about leaving 5 gig files lying around
+ # unlink may fail if applied directly to a large file
+ # be paranoid about leaving 5 gig files lying around
+ open(BIG, ">$big0"); # truncate
+ close(BIG);
}
# eof