/* TODO: Combine JUMPABLE and HAS_TEXT to cache OP(rn) */
/* for use after a quantifier and before an EXACT-like node -- japhy */
-#define JUMPABLE(rn) ( \
- OP(rn) == OPEN || OP(rn) == CLOSE || OP(rn) == EVAL || \
+/* it would be nice to rework regcomp.sym to generate this stuff. sigh */
+#define JUMPABLE(rn) ( \
+ OP(rn) == OPEN || \
+ (OP(rn) == CLOSE && (!cur_eval || cur_eval->u.eval.close_paren != ARG(rn))) || \
+ OP(rn) == EVAL || \
OP(rn) == SUSPEND || OP(rn) == IFMATCH || \
OP(rn) == PLUS || OP(rn) == MINMOD || \
+ OP(rn) == KEEPS || (PL_regkind[OP(rn)] == VERB) || \
(PL_regkind[OP(rn)] == CURLY && ARG1(rn) > 0) \
)
+#define IS_EXACT(rn) (PL_regkind[OP(rn)] == EXACT)
-#define HAS_TEXT(rn) ( \
- PL_regkind[OP(rn)] == EXACT || PL_regkind[OP(rn)] == REF \
-)
+#define HAS_TEXT(rn) ( IS_EXACT(rn) || PL_regkind[OP(rn)] == REF )
+
+#if 0
+/* Currently these are only used when PL_regkind[OP(rn)] == EXACT so
+ we don't need this definition. */
+#define IS_TEXT(rn) ( OP(rn)==EXACT || OP(rn)==REF || OP(rn)==NREF )
+#define IS_TEXTF(rn) ( OP(rn)==EXACTF || OP(rn)==REFF || OP(rn)==NREFF )
+#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL || OP(rn)==REFFL || OP(rn)==NREFFL )
+
+#else
+/* ... so we use this as its faster. */
+#define IS_TEXT(rn) ( OP(rn)==EXACT )
+#define IS_TEXTF(rn) ( OP(rn)==EXACTF )
+#define IS_TEXTFL(rn) ( OP(rn)==EXACTFL )
+
+#endif
/*
Search for mandatory following text node; for lookahead, the text must
/* end shift should be non negative here */
}
-#ifdef DEBUGGING /* 7/99: reports of failure (with the older version) */
+#ifdef QDEBUGGING /* 7/99: reports of failure (with the older version) */
if (end_shift < 0)
Perl_croak(aTHX_ "panic: end_shift: %"IVdf" pattern:\n%s\n ",
(IV)end_shift, prog->precomp);
return s;
}
+static void
+S_swap_match_buff (pTHX_ regexp *prog) {
+ I32 *t;
+ RXi_GET_DECL(prog,progi);
+
+ if (!progi->swap) {
+ /* We have to be careful. If the previous successful match
+ was from this regex we don't want a subsequent paritally
+ successful match to clobber the old results.
+ So when we detect this possibility we add a swap buffer
+ to the re, and switch the buffer each match. If we fail
+ we switch it back, otherwise we leave it swapped.
+ */
+ Newxz(progi->swap, 1, regexp_paren_ofs);
+ /* no need to copy these */
+ Newxz(progi->swap->startp, prog->nparens + 1, I32);
+ Newxz(progi->swap->endp, prog->nparens + 1, I32);
+ }
+ t = progi->swap->startp;
+ progi->swap->startp = prog->startp;
+ prog->startp = t;
+ t = progi->swap->endp;
+ progi->swap->endp = prog->endp;
+ prog->endp = t;
+}
+
+
/*
- regexec_flags - match a regexp against a string
*/
I32 multiline;
RXi_GET_DECL(prog,progi);
regmatch_info reginfo; /* create some info to pass to regtry etc */
+ bool swap_on_fail = 0;
GET_RE_DEBUG_FLAGS_DECL;
reginfo.ganch = strbeg;
}
if (PL_curpm && (PM_GETRE(PL_curpm) == prog)) {
- I32 *t;
- if (!progi->swap) {
- /* We have to be careful. If the previous successful match
- was from this regex we don't want a subsequent paritally
- successful match to clobber the old results.
- So when we detect this possibility we add a swap buffer
- to the re, and switch the buffer each match. If we fail
- we switch it back, otherwise we leave it swapped.
- */
- Newxz(progi->swap, 1, regexp_paren_ofs);
- /* no need to copy these */
- Newxz(progi->swap->startp, prog->nparens + 1, I32);
- Newxz(progi->swap->endp, prog->nparens + 1, I32);
- }
- t = progi->swap->startp;
- progi->swap->startp = prog->startp;
- prog->startp = t;
- t = progi->swap->endp;
- progi->swap->endp = prog->endp;
- prog->endp = t;
+ swap_on_fail = 1;
+ swap_match_buff(prog); /* do we need a save destructor here for
+ eval dies? */
}
if (!(flags & REXEC_CHECKED) && (prog->check_substr != NULL || prog->check_utf8 != NULL)) {
re_scream_pos_data d;
PL_colors[4], PL_colors[5]));
if (PL_reg_eval_set)
restore_pos(aTHX_ prog);
- if (progi->swap) {
+ if (swap_on_fail)
/* we failed :-( roll it back */
- I32 *t;
- t = progi->swap->startp;
- progi->swap->startp = prog->startp;
- prog->startp = t;
- t = progi->swap->endp;
- progi->swap->endp = prog->endp;
- prog->endp = t;
- }
+ swap_match_buff(prog);
+
return 0;
}
bool result = 0; /* return value of S_regmatch */
int depth = 0; /* depth of backtrack stack */
- int nochange_depth = 0; /* depth of GOSUB recursion with nochange*/
+ U32 nochange_depth = 0; /* depth of GOSUB recursion with nochange */
+ const U32 max_nochange_depth =
+ (3 * rex->nparens > MAX_RECURSE_EVAL_NOCHANGE_DEPTH) ?
+ 3 * rex->nparens : MAX_RECURSE_EVAL_NOCHANGE_DEPTH;
+
regmatch_state *yes_state = NULL; /* state to pop to on success of
subpattern */
/* mark_state piggy backs on the yes_state logic so that when we unwind
GET_RE_DEBUG_FLAGS_DECL;
#endif
- DEBUG_OPTIMISE_r( {
+ DEBUG_OPTIMISE_r( DEBUG_EXECUTE_r({
PerlIO_printf(Perl_debug_log,"regmatch start\n");
- });
+ }));
/* on first ever call to regmatch, allocate first slab */
if (!PL_regmatch_slab) {
Newx(PL_regmatch_slab, 1, regmatch_slab);
if (locinput == reginfo->ganch)
break;
sayNO;
+
+ case KEEPS:
+ /* update the startpoint */
+ st->u.keeper.val = PL_regstartp[0];
+ PL_reginput = locinput;
+ PL_regstartp[0] = locinput - PL_bostr;
+ PUSH_STATE_GOTO(KEEPS_next, next);
+ /*NOT-REACHED*/
+ case KEEPS_next_fail:
+ /* rollback the start point change */
+ PL_regstartp[0] = st->u.keeper.val;
+ sayNO_SILENT;
+ /*NOT-REACHED*/
case EOL:
goto seol;
case MEOL:
ST.B = next;
ST.jump = trie->jump;
ST.me = scan;
-
/*
traverse the TRIE keeping track of all accepting states
we transition through until we get to a failing node.
PL_colors[4], (IV)ST.accepted, PL_colors[5] );
);
}}
-
- /* FALL THROUGH */
+ goto trie_first_try; /* jump into the fail handler */
+ /* NOTREACHED */
case TRIE_next_fail: /* we failed - try next alterative */
+ if ( ST.jump) {
+ REGCP_UNWIND(ST.cp);
+ for (n = *PL_reglastparen; n > ST.lastparen; n--)
+ PL_regendp[n] = -1;
+ *PL_reglastparen = n;
+ }
+ trie_first_try:
if (do_cutgroup) {
do_cutgroup = 0;
no_final = 0;
}
+
+ if ( ST.jump) {
+ ST.lastparen = *PL_reglastparen;
+ REGCP_SET(ST.cp);
+ }
if ( ST.accepted == 1 ) {
/* only one choice left - just continue */
DEBUG_EXECUTE_r({
continue; /* execute rest of RE */
}
-
- if (!ST.accepted-- ) {
+
+ if ( !ST.accepted-- ) {
DEBUG_EXECUTE_r({
PerlIO_printf( Perl_debug_log,
"%*s %sTRIE failed...%s\n",
FREETMPS;
LEAVE;
sayNO_SILENT;
- }
+ /*NOTREACHED*/
+ }
/*
There are at least two accepting states left. Presumably
if (cur_eval && cur_eval->locinput==locinput) {
if (cur_eval->u.eval.close_paren == (U32)ARG(scan))
Perl_croak(aTHX_ "Infinite recursion in regex");
- if ( ++nochange_depth > MAX_RECURSE_EVAL_NOCHANGE_DEPTH )
+ if ( ++nochange_depth > max_nochange_depth )
Perl_croak(aTHX_
"Pattern subroutine nesting without pos change"
" exceeded limit in regex");
/* NOTREACHED */
case EVAL: /* /(?{A})B/ /(??{A})B/ and /(?(?{A})X|Y)B/ */
if (cur_eval && cur_eval->locinput==locinput) {
- if ( ++nochange_depth > MAX_RECURSE_EVAL_NOCHANGE_DEPTH )
+ if ( ++nochange_depth > max_nochange_depth )
Perl_croak(aTHX_ "EVAL without pos change exceeded limit in regex");
} else {
nochange_depth = 0;
cur_curlyx = ST.prev_curlyx;
/* XXXX This is too dramatic a measure... */
PL_reg_maxiter = 0;
+ if ( nochange_depth > 0 );
+ nochange_depth--;
sayYES;
cur_curlyx = ST.prev_curlyx;
/* XXXX This is too dramatic a measure... */
PL_reg_maxiter = 0;
+ if ( nochange_depth > 0 );
+ nochange_depth--;
sayNO_SILENT;
#undef ST
regnode *text_node = ST.B;
if (! HAS_TEXT(text_node))
FIND_NEXT_IMPT(text_node);
- if (HAS_TEXT(text_node)
- && PL_regkind[OP(text_node)] != REF)
+ /* this used to be
+
+ (HAS_TEXT(text_node) && PL_regkind[OP(text_node)] == EXACT)
+
+ But the former is redundant in light of the latter.
+
+ if this changes back then the macro for
+ IS_TEXT and friends need to change.
+ */
+ if (PL_regkind[OP(text_node)] == EXACT)
{
+
ST.c1 = (U8)*STRING(text_node);
ST.c2 =
- (OP(text_node) == EXACTF || OP(text_node) == REFF)
+ (IS_TEXTF(text_node))
? PL_fold[ST.c1]
- : (OP(text_node) == EXACTFL || OP(text_node) == REFFL)
+ : (IS_TEXTFL(text_node))
? PL_fold_locale[ST.c1]
: ST.c1;
}
&& UCHARAT(PL_reginput) != ST.c2)
{
/* simulate B failing */
+ DEBUG_OPTIMISE_r(
+ PerlIO_printf(Perl_debug_log,
+ "%*s CURLYM Fast bail c1=%"IVdf" c2=%"IVdf"\n",
+ (int)(REPORT_CODE_OFF+(depth*2)),"",
+ (IV)ST.c1,(IV)ST.c2
+ ));
state_num = CURLYM_B_fail;
goto reenter_switch;
}
if (! HAS_TEXT(text_node))
ST.c1 = ST.c2 = CHRTEST_VOID;
else {
- if (PL_regkind[OP(text_node)] == REF) {
+ if ( PL_regkind[OP(text_node)] != EXACT ) {
ST.c1 = ST.c2 = CHRTEST_VOID;
goto assume_ok_easy;
}
else
s = (U8*)STRING(text_node);
-
+
+ /* Currently we only get here when
+
+ PL_rekind[OP(text_node)] == EXACT
+
+ if this changes back then the macro for IS_TEXT and
+ friends need to change. */
if (!UTF) {
ST.c2 = ST.c1 = *s;
- if (OP(text_node) == EXACTF || OP(text_node) == REFF)
+ if (IS_TEXTF(text_node))
ST.c2 = PL_fold[ST.c1];
- else if (OP(text_node) == EXACTFL || OP(text_node) == REFFL)
+ else if (IS_TEXTFL(text_node))
ST.c2 = PL_fold_locale[ST.c1];
}
else { /* UTF */
- if (OP(text_node) == EXACTF || OP(text_node) == REFF) {
+ if (IS_TEXTF(text_node)) {
STRLEN ulen1, ulen2;
U8 tmpbuf1[UTF8_MAXBYTES_CASE+1];
U8 tmpbuf2[UTF8_MAXBYTES_CASE+1];
DEBUG_EXECUTE_r(
PerlIO_printf(Perl_debug_log, "%*s EVAL trying tail ... %"UVxf"\n",
REPORT_CODE_OFF+depth*2, "",PTR2UV(cur_eval)););
+ if ( nochange_depth > 0 );
+ nochange_depth++;
PUSH_YES_STATE_GOTO(EVAL_AB,
st->u.eval.prev_eval->u.eval.B); /* match B */
}
register char *loceol = PL_regeol;
register I32 hardcount = 0;
register bool do_utf8 = PL_reg_match_utf8;
+#ifndef DEBUGGING
+ PERL_UNUSED_ARG(depth);
+#endif
scan = PL_reginput;
if (max == REG_INFTY)
SV* const sv = newSVsv(prog->substrs->data[i].substr);
prog->substrs->data[i].utf8_substr = sv;
sv_utf8_upgrade(sv);
- if (SvVALID(prog->substrs->data[i].substr))
- fbm_compile(sv, 0);
- if (SvTAIL(prog->substrs->data[i].substr))
- SvTAIL_on(sv);
+ if (SvVALID(prog->substrs->data[i].substr)) {
+ const U8 flags = BmFLAGS(prog->substrs->data[i].substr);
+ if (flags & FBMcf_TAIL) {
+ /* Trim the trailing \n that fbm_compile added last
+ time. */
+ SvCUR_set(sv, SvCUR(sv) - 1);
+ /* Whilst this makes the SV technically "invalid" (as its
+ buffer is no longer followed by "\0") when fbm_compile()
+ adds the "\n" back, a "\0" is restored. */
+ }
+ fbm_compile(sv, flags);
+ }
if (prog->substrs->data[i].substr == prog->check_substr)
prog->check_utf8 = sv;
}
&& !prog->substrs->data[i].substr) {
SV* sv = newSVsv(prog->substrs->data[i].utf8_substr);
if (sv_utf8_downgrade(sv, TRUE)) {
- if (SvVALID(prog->substrs->data[i].utf8_substr))
- fbm_compile(sv, 0);
- if (SvTAIL(prog->substrs->data[i].utf8_substr))
- SvTAIL_on(sv);
+ if (SvVALID(prog->substrs->data[i].utf8_substr)) {
+ const U8 flags
+ = BmFLAGS(prog->substrs->data[i].utf8_substr);
+ if (flags & FBMcf_TAIL) {
+ /* Trim the trailing \n that fbm_compile added last
+ time. */
+ SvCUR_set(sv, SvCUR(sv) - 1);
+ }
+ fbm_compile(sv, flags);
+ }
} else {
SvREFCNT_dec(sv);
sv = &PL_sv_undef;