/* regcomp.h
+ *
+ * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ * 2000, 2001, 2002, 2003, 2005 by Larry Wall and others
+ *
+ * You may distribute under the terms of either the GNU General Public
+ * License or the Artistic License, as specified in the README file.
+ *
*/
typedef OP OP_4tree; /* Will be redefined later. */
+
+#define PERL_ENABLE_TRIE_OPTIMISATION 1
+#define PERL_ENABLE_EXTENDED_TRIE_OPTIMISATION 1
+#define PERL_ENABLE_EXPERIMENTAL_REGEX_OPTIMISATIONS 0
+
/*
* The "internal use only" fields in regexp.h are present to pass info from
* compile to execute that permits the execute phase to run lots faster on
* simple cases. They are:
*
- * regstart sv that must begin a match; Nullch if none obvious
+ * regstart sv that must begin a match; NULL if none obvious
* reganch is the match anchored (at beginning-of-line only)?
* regmust string (pointer into program) that match must include, or NULL
* [regmust changed to SV* for bminstr()--law]
* a literal string; for others, it is a node leading into a sub-FSM. In
* particular, the operand of a BRANCH node is the first node of the branch.
* (NB this is *not* a tree structure: the tail of the branch connects
- * to the thing following the set of BRANCHes.) The opcodes are:
+ * to the thing following the set of BRANCHes.) The opcodes are defined
+ * in regnodes.h which is generated from regcomp.sym by regcomp.pl.
*/
/*
#undef NEXT_OFF
#undef NODE_ALIGN
-#ifndef lint
-# define NEXT_OFF(p) ((p)->next_off)
-# define NODE_ALIGN(node)
-# define NODE_ALIGN_FILL(node) ((node)->flags = 0xde) /* deadbeef */
-#else /* lint */
-# define NEXT_OFF(p) 0
-# define NODE_ALIGN(node)
-# define NODE_ALIGN_FILL(node)
-#endif /* lint */
+#define NEXT_OFF(p) ((p)->next_off)
+#define NODE_ALIGN(node)
+#define NODE_ALIGN_FILL(node) ((node)->flags = 0xde) /* deadbeef */
#define SIZE_ALIGN NODE_ALIGN
#define ANYOF_BITMAP_CLEAR(p,c) (ANYOF_BITMAP_BYTE(p, c) &= ~ANYOF_BIT(c))
#define ANYOF_BITMAP_TEST(p, c) (ANYOF_BITMAP_BYTE(p, c) & ANYOF_BIT(c))
+#define ANYOF_BITMAP_SETALL(p) \
+ memset (ANYOF_BITMAP(p), 255, ANYOF_BITMAP_SIZE)
+#define ANYOF_BITMAP_CLEARALL(p) \
+ Zero (ANYOF_BITMAP(p), ANYOF_BITMAP_SIZE)
+/* Check that all 256 bits are all set. Used in S_cl_is_anything() */
+#define ANYOF_BITMAP_TESTALLSET(p) \
+ memEQ (ANYOF_BITMAP(p), "\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377\377", ANYOF_BITMAP_SIZE)
+
#define ANYOF_SKIP ((ANYOF_SIZE - 1)/sizeof(regnode))
#define ANYOF_CLASS_SKIP ((ANYOF_CLASS_SIZE - 1)/sizeof(regnode))
#define ANYOF_CLASS_ADD_SKIP (ANYOF_CLASS_SKIP - ANYOF_SKIP)
/*
* Utility definitions.
*/
-#ifndef lint
#ifndef CHARMASK
-#define UCHARAT(p) ((int)*(U8*)(p))
+# define UCHARAT(p) ((int)*(const U8*)(p))
#else
-#define UCHARAT(p) ((int)*(p)&CHARMASK)
+# define UCHARAT(p) ((int)*(p)&CHARMASK)
#endif
-#else /* lint */
-#define UCHARAT(p) PL_regdummy
-#endif /* lint */
#define EXTRA_SIZE(guy) ((sizeof(guy)-1)/sizeof(struct regnode))
-#define REG_SEEN_ZERO_LEN 1
-#define REG_SEEN_LOOKBEHIND 2
-#define REG_SEEN_GPOS 4
-#define REG_SEEN_EVAL 8
-#define REG_SEEN_CANY 16
+#define REG_SEEN_ZERO_LEN 0x00000001
+#define REG_SEEN_LOOKBEHIND 0x00000002
+#define REG_SEEN_GPOS 0x00000004
+#define REG_SEEN_EVAL 0x00000008
+#define REG_SEEN_CANY 0x00000010
#define REG_SEEN_SANY REG_SEEN_CANY /* src bckwrd cmpt */
-#define REG_SEEN_SEOL 32
START_EXTERN_C
+#ifdef PLUGGABLE_RE_EXTENSION
+#include "re_nodes.h"
+#else
#include "regnodes.h"
+#endif
/* The following have no fixed length. U8 so we can do strchr() on it. */
#ifndef DOINIT
EXTCONST U8 PL_varies[];
#else
EXTCONST U8 PL_varies[] = {
- BRANCH, BACK, STAR, PLUS, CURLY, CURLYX, REF, REFF, REFFL,
+ BRANCH, BACK, STAR, PLUS, CURLY, CURLYX, REF, REFF, REFFL,
WHILEM, CURLYM, CURLYN, BRANCHJ, IFTHEN, SUSPEND, CLUMP, 0
};
#endif
/* .what is a character array with one character for each member of .data
* The character describes the function of the corresponding .data item:
- * f - start-class data for regstclass optimization
+ * f - start-class data for regstclass optimization
* n - Root of op tree for (?{EVAL}) item
* o - Start op for (?{EVAL}) item
- * p - Pad for (?{EVAL} item
- * s - swash for unicode-style character class
+ * p - Pad for (?{EVAL}) item
+ * s - swash for unicode-style character class, and the multicharacter
+ * strings resulting from casefolding the single-character entries
+ * in the character class
+ * t - trie struct
+ * T - aho-trie struct
* 20010712 mjd@plover.com
* (Remember to update re_dup() and pregfree() if you add any items.)
*/
struct reg_substr_datum {
I32 min_offset;
I32 max_offset;
- SV *substr;
+ SV *substr; /* non-utf8 variant */
+ SV *utf8_substr; /* utf8 variant */
};
struct reg_substr_data {
};
#define anchored_substr substrs->data[0].substr
+#define anchored_utf8 substrs->data[0].utf8_substr
#define anchored_offset substrs->data[0].min_offset
#define float_substr substrs->data[1].substr
+#define float_utf8 substrs->data[1].utf8_substr
#define float_min_offset substrs->data[1].min_offset
#define float_max_offset substrs->data[1].max_offset
#define check_substr substrs->data[2].substr
+#define check_utf8 substrs->data[2].utf8_substr
#define check_offset_min substrs->data[2].min_offset
#define check_offset_max substrs->data[2].max_offset
+
+
+
+/* trie related stuff */
+
+/* a transition record for the state machine. the
+ check field determines which state "owns" the
+ transition. the char the transition is for is
+ determined by offset from the owning states base
+ field. the next field determines which state
+ is to be transitioned to if any.
+*/
+struct _reg_trie_trans {
+ U32 next;
+ U32 check;
+};
+
+/* a transition list element for the list based representation */
+struct _reg_trie_trans_list_elem {
+ U16 forid;
+ U32 newstate;
+};
+typedef struct _reg_trie_trans_list_elem reg_trie_trans_le;
+
+/* a state for compressed nodes. base is an offset
+ into an array of reg_trie_trans array. If wordnum is
+ nonzero the state is accepting. if base is zero then
+ the state has no children (and will be accepting)
+*/
+struct _reg_trie_state {
+ U16 wordnum;
+ union {
+ U32 base;
+ reg_trie_trans_le* list;
+ } trans;
+};
+
+
+
+typedef struct _reg_trie_state reg_trie_state;
+typedef struct _reg_trie_trans reg_trie_trans;
+
+
+/* anything in here that needs to be freed later
+ should be dealt with in pregfree */
+struct _reg_trie_data {
+ U16 uniquecharcount;
+ U32 lasttrans;
+ U16 *charmap;
+ HV *widecharmap;
+ reg_trie_state *states;
+ reg_trie_trans *trans;
+ char *bitmap;
+ U32 refcount;
+ U32 startstate;
+ STRLEN minlen;
+ STRLEN maxlen;
+ U32 *wordlen;
+ U32 laststate; /* Build only */
+#ifdef DEBUGGING
+ U16 wordcount; /* Build only */
+ STRLEN charcount; /* Build only */
+ AV *words;
+ AV *revcharmap;
+#endif
+};
+typedef struct _reg_trie_data reg_trie_data;
+
+struct _reg_ac_data {
+ U32 *fail;
+ reg_trie_state *states;
+ reg_trie_data *trie;
+ U32 refcount;
+};
+typedef struct _reg_ac_data reg_ac_data;
+
+/* ANY_BIT doesnt use the structure, so we can borrow it here.
+ This is simpler than refactoring all of it as wed end up with
+ three different sets... */
+
+#define TRIE_BITMAP(p) (((reg_trie_data *)(p))->bitmap)
+#define TRIE_BITMAP_BYTE(p, c) (TRIE_BITMAP(p)[(((U8)c) >> 3) & 31])
+#define TRIE_BITMAP_SET(p, c) (TRIE_BITMAP_BYTE(p, c) |= ANYOF_BIT((U8)c))
+#define TRIE_BITMAP_CLEAR(p,c) (TRIE_BITMAP_BYTE(p, c) &= ~ANYOF_BIT((U8)c))
+#define TRIE_BITMAP_TEST(p, c) (TRIE_BITMAP_BYTE(p, c) & ANYOF_BIT((U8)c))
+
+
+/* these defines assume uniquecharcount is the correct variable, and state may be evaluated twice */
+#define TRIE_NODENUM(state) (((state)-1)/(trie->uniquecharcount)+1)
+#define SAFE_TRIE_NODENUM(state) ((state) ? (((state)-1)/(trie->uniquecharcount)+1) : (state))
+#define TRIE_NODEIDX(state) ((state) ? (((state)-1)*(trie->uniquecharcount)+1) : (state))
+
+#ifdef DEBUGGING
+#define TRIE_WORDCOUNT(trie) ((trie)->wordcount)
+#define TRIE_CHARCOUNT(trie) ((trie)->charcount)
+#define TRIE_LASTSTATE(trie) ((trie)->laststate)
+#define TRIE_REVCHARMAP(trie) ((trie)->revcharmap)
+#else
+#define TRIE_WORDCOUNT(trie) (trie_wordcount)
+#define TRIE_CHARCOUNT(trie) (trie_charcount)
+/*#define TRIE_LASTSTATE(trie) (trie_laststate)*/
+#define TRIE_LASTSTATE(trie) ((trie)->laststate)
+#define TRIE_REVCHARMAP(trie) (trie_revcharmap)
+#endif
+
+#define RE_TRIE_MAXBUF_INIT 65536
+#define RE_TRIE_MAXBUF_NAME "\022E_TRIE_MAXBUF"
+#define RE_DEBUG_FLAGS "\022E_DEBUG_FLAGS"
+
+/*
+
+RE_DEBUG_FLAGS is used to control what debug output is emitted
+its divided into three groups of options, some of which interact.
+The three groups are: Compile, Execute, Extra. There is room for a
+further group, as currently only the low three bytes are used.
+
+ Compile Options:
+
+ PARSE
+ PEEP
+ TRIE
+ PROGRAM
+ OFFSETS
+
+ Execute Options:
+
+ INTUIT
+ MATCH
+ TRIE
+
+ Extra Options
+
+ TRIE
+ OFFSETS
+
+If you modify any of these make sure you make corresponding changes to
+re.pm, especially to the documentation.
+
+*/
+
+
+/* Compile */
+#define RE_DEBUG_COMPILE_MASK 0x0000FF
+#define RE_DEBUG_COMPILE_PARSE 0x000001
+#define RE_DEBUG_COMPILE_OPTIMISE 0x000002
+#define RE_DEBUG_COMPILE_TRIE 0x000004
+#define RE_DEBUG_COMPILE_DUMP 0x000008
+#define RE_DEBUG_COMPILE_OFFSETS 0x000010
+
+/* Execute */
+#define RE_DEBUG_EXECUTE_MASK 0x00FF00
+#define RE_DEBUG_EXECUTE_INTUIT 0x000100
+#define RE_DEBUG_EXECUTE_MATCH 0x000200
+#define RE_DEBUG_EXECUTE_TRIE 0x000400
+
+/* Extra */
+#define RE_DEBUG_EXTRA_MASK 0xFF0000
+#define RE_DEBUG_EXTRA_TRIE 0x010000
+#define RE_DEBUG_EXTRA_OFFSETS 0x020000
+
+#define RE_DEBUG_FLAG(x) (re_debug_flags & x)
+/* Compile */
+#define DEBUG_COMPILE_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_COMPILE_MASK) x )
+#define DEBUG_PARSE_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_COMPILE_PARSE) x )
+#define DEBUG_OPTIMISE_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_COMPILE_OPTIMISE) x )
+#define DEBUG_PARSE_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_COMPILE_PARSE) x )
+#define DEBUG_DUMP_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_COMPILE_DUMP) x )
+#define DEBUG_OFFSETS_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_COMPILE_OFFSETS) x )
+#define DEBUG_TRIE_COMPILE_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_COMPILE_TRIE) x )
+
+/* Execute */
+#define DEBUG_EXECUTE_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_EXECUTE_MASK) x )
+#define DEBUG_INTUIT_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_EXECUTE_INTUIT) x )
+#define DEBUG_MATCH_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_EXECUTE_MATCH) x )
+#define DEBUG_TRIE_EXECUTE_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_EXECUTE_TRIE) x )
+
+/* Extra */
+#define DEBUG_EXTRA_r(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_EXTRA_MASK) x )
+#define MJD_OFFSET_DEBUG(x) DEBUG_r( \
+ if (re_debug_flags & RE_DEBUG_EXTRA_OFFSETS) \
+ Perl_warn_nocontext x )
+#define DEBUG_TRIE_COMPILE_MORE_r(x) DEBUG_TRIE_COMPILE_r( \
+ if (re_debug_flags & RE_DEBUG_EXTRA_TRIE) x )
+#define DEBUG_TRIE_EXECUTE_MORE_r(x) DEBUG_TRIE_EXECUTE_r( \
+ if (re_debug_flags & RE_DEBUG_EXTRA_TRIE) x )
+
+#define DEBUG_TRIE_r(x) DEBUG_r( \
+ if (re_debug_flags & (RE_DEBUG_COMPILE_TRIE \
+ | RE_DEBUG_EXECUTE_TRIE )) x )
+
+/* initialization */
+/* get_sv() can return NULL during global destruction. */
+#define GET_RE_DEBUG_FLAGS DEBUG_r({ \
+ SV * re_debug_flags_sv = NULL; \
+ re_debug_flags_sv = get_sv(RE_DEBUG_FLAGS, 1); \
+ if (re_debug_flags_sv) { \
+ if (!SvIOK(re_debug_flags_sv)) \
+ sv_setuv(re_debug_flags_sv, RE_DEBUG_COMPILE_DUMP | RE_DEBUG_EXECUTE_MASK ); \
+ re_debug_flags=SvIV(re_debug_flags_sv); \
+ }\
+})
+
+#ifdef DEBUGGING
+#define GET_RE_DEBUG_FLAGS_DECL IV re_debug_flags = 0; GET_RE_DEBUG_FLAGS;
+#else
+#define GET_RE_DEBUG_FLAGS_DECL
+#endif
+