/* pp_ctl.c
*
- * Copyright (c) 1991-1999, Larry Wall
+ * Copyright (c) 1991-2001, Larry Wall
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
PP(pp_wantarray)
{
- djSP;
+ dSP;
I32 cxix;
EXTEND(SP, 1);
PP(pp_regcomp)
{
- djSP;
+ dSP;
register PMOP *pm = (PMOP*)cLOGOP->op_other;
register char *t;
SV *tmpstr;
STRLEN len;
MAGIC *mg = Null(MAGIC*);
-#if defined(USE_ITHREADS) || defined(USE_THREADS)
- if ((pm->op_pmflags & PMf_KEEP) && !(pm->op_private & OPpRUNTIME)) {
- /* no point compiling again */
- RETURN;
- }
-#endif
-
tmpstr = POPs;
if (SvROK(tmpstr)) {
SV *sv = SvRV(tmpstr);
PL_reginterp_cnt = I32_MAX; /* Mark as safe. */
pm->op_pmflags = pm->op_pmpermflags; /* reset case sensitivity */
+ if (DO_UTF8(tmpstr))
+ pm->op_pmdynflags |= PMdf_DYN_UTF8;
+ else {
+ pm->op_pmdynflags &= ~PMdf_DYN_UTF8;
+ if (pm->op_pmdynflags & PMdf_UTF8)
+ t = (char*)bytes_to_utf8((U8*)t, &len);
+ }
pm->op_pmregexp = CALLREGCOMP(aTHX_ t, t + len, pm);
- PL_reginterp_cnt = 0; /* XXXX Be extra paranoid - needed
+ if (!DO_UTF8(tmpstr) && (pm->op_pmdynflags & PMdf_UTF8))
+ Safefree(t);
+ PL_reginterp_cnt = 0; /* XXXX Be extra paranoid - needed
inside tie/overload accessors. */
}
}
PP(pp_substcont)
{
- djSP;
+ dSP;
register PMOP *pm = (PMOP*) cLOGOP->op_other;
register PERL_CONTEXT *cx = &cxstack[cxstack_ix];
register SV *dstr = cx->sb_dstr;
: (REXEC_COPY_STR|REXEC_IGNOREPOS|REXEC_NOT_FIRST))))
{
SV *targ = cx->sb_targ;
- sv_catpvn(dstr, s, cx->sb_strend - s);
+ sv_catpvn(dstr, s, cx->sb_strend - s);
cx->sb_rxtainted |= RX_MATCH_TAINTED(rx);
(void)SvOOK_off(targ);
SvPVX(targ) = SvPVX(dstr);
SvCUR_set(targ, SvCUR(dstr));
SvLEN_set(targ, SvLEN(dstr));
+ if (DO_UTF8(dstr))
+ SvUTF8_on(targ);
SvPVX(dstr) = 0;
sv_free(dstr);
TAINT_IF(cx->sb_rxtainted & 1);
PUSHs(sv_2mortal(newSViv((I32)cx->sb_iters - 1)));
- (void)SvPOK_only(targ);
+ (void)SvPOK_only_UTF8(targ);
TAINT_IF(cx->sb_rxtainted);
SvSETMAGIC(targ);
SvTAINT(targ);
cx->sb_strend = s + (cx->sb_strend - m);
}
cx->sb_m = m = rx->startp[0] + orig;
- sv_catpvn(dstr, s, m-s);
+ if (m > s)
+ sv_catpvn(dstr, s, m-s);
cx->sb_s = rx->endp[0] + orig;
+ { /* Update the pos() information. */
+ SV *sv = cx->sb_targ;
+ MAGIC *mg;
+ I32 i;
+ if (SvTYPE(sv) < SVt_PVMG)
+ (void)SvUPGRADE(sv, SVt_PVMG);
+ if (!(mg = mg_find(sv, 'g'))) {
+ sv_magic(sv, Nullsv, 'g', Nullch, 0);
+ mg = mg_find(sv, 'g');
+ }
+ i = m - orig;
+ if (DO_UTF8(sv))
+ sv_pos_b2u(sv, &i);
+ mg->mg_len = i;
+ }
cx->sb_rxtainted |= RX_MATCH_TAINTED(rx);
rxres_save(&cx->sb_rxres, rx);
RETURNOP(pm->op_pmreplstart);
PP(pp_formline)
{
- djSP; dMARK; dORIGMARK;
+ dSP; dMARK; dORIGMARK;
register SV *tmpForm = *++MARK;
register U16 *fpc;
register char *t;
NV value;
bool gotsome;
STRLEN len;
- STRLEN fudge = SvCUR(tmpForm) * (IN_UTF8 ? 3 : 1) + 1;
+ STRLEN fudge = SvCUR(tmpForm) * (IN_BYTE ? 1 : 3) + 1;
+ bool item_is_utf = FALSE;
if (!SvMAGICAL(tmpForm) || !SvCOMPILED(tmpForm)) {
- SvREADONLY_off(tmpForm);
- doparseform(tmpForm);
+ if (SvREADONLY(tmpForm)) {
+ SvREADONLY_off(tmpForm);
+ doparseform(tmpForm);
+ SvREADONLY_on(tmpForm);
+ }
+ else
+ doparseform(tmpForm);
}
SvPV_force(PL_formtarget, len);
case FF_MORE: name = "MORE"; break;
case FF_LINEMARK: name = "LINEMARK"; break;
case FF_END: name = "END"; break;
+ case FF_0DECIMAL: name = "0DECIMAL"; break;
}
if (arg >= 0)
PerlIO_printf(Perl_debug_log, "%-16s%ld\n", name, (long) arg);
case FF_CHECKNL:
item = s = SvPV(sv, len);
itemsize = len;
- if (IN_UTF8) {
+ if (DO_UTF8(sv)) {
itemsize = sv_len_utf8(sv);
if (itemsize != len) {
I32 itembytes;
break;
s++;
}
+ item_is_utf = TRUE;
itemsize = s - item;
sv_pos_b2u(sv, &itemsize);
break;
}
}
+ item_is_utf = FALSE;
if (itemsize > fieldsize)
itemsize = fieldsize;
send = chophere = s + itemsize;
case FF_CHECKCHOP:
item = s = SvPV(sv, len);
itemsize = len;
- if (IN_UTF8) {
+ if (DO_UTF8(sv)) {
itemsize = sv_len_utf8(sv);
if (itemsize != len) {
I32 itembytes;
itemsize = chophere - item;
sv_pos_b2u(sv, &itemsize);
}
+ item_is_utf = TRUE;
break;
}
}
+ item_is_utf = FALSE;
if (itemsize <= fieldsize) {
send = chophere = s + itemsize;
while (s < send) {
case FF_ITEM:
arg = itemsize;
s = item;
- if (IN_UTF8) {
+ if (item_is_utf) {
while (arg--) {
- if (*s & 0x80) {
+ if (UTF8_IS_CONTINUED(*s)) {
switch (UTF8SKIP(s)) {
case 7: *t++ = *s++;
case 6: *t++ = *s++;
case FF_LINEGLOB:
item = s = SvPV(sv, len);
itemsize = len;
+ item_is_utf = FALSE; /* XXX is this correct? */
if (itemsize) {
gotsome = TRUE;
send = s + itemsize;
value = SvNV(sv);
/* Formats aren't yet marked for locales, so assume "yes". */
{
- RESTORE_NUMERIC_LOCAL();
+ STORE_NUMERIC_STANDARD_SET_LOCAL();
#if defined(USE_LONG_DOUBLE)
if (arg & 256) {
sprintf(t, "%#*.*" PERL_PRIfldbl,
t += fieldsize;
break;
+ case FF_0DECIMAL:
+ /* If the field is marked with ^ and the value is undefined,
+ blank it out. */
+ arg = *fpc++;
+ if ((arg & 512) && !SvOK(sv)) {
+ arg = fieldsize;
+ while (arg--)
+ *t++ = ' ';
+ break;
+ }
+ gotsome = TRUE;
+ value = SvNV(sv);
+ /* Formats aren't yet marked for locales, so assume "yes". */
+ {
+ STORE_NUMERIC_STANDARD_SET_LOCAL();
+#if defined(USE_LONG_DOUBLE)
+ if (arg & 256) {
+ sprintf(t, "%#0*.*" PERL_PRIfldbl,
+ (int) fieldsize, (int) arg & 255, value);
+/* is this legal? I don't have long doubles */
+ } else {
+ sprintf(t, "%0*.0" PERL_PRIfldbl, (int) fieldsize, value);
+ }
+#else
+ if (arg & 256) {
+ sprintf(t, "%#0*.*f",
+ (int) fieldsize, (int) arg & 255, value);
+ } else {
+ sprintf(t, "%0*.0f",
+ (int) fieldsize, value);
+ }
+#endif
+ RESTORE_NUMERIC_STANDARD();
+ }
+ t += fieldsize;
+ break;
+
case FF_NEWLINE:
f++;
while (t-- > linemark && *t == ' ') ;
PP(pp_grepstart)
{
- djSP;
+ dSP;
SV *src;
if (PL_stack_base + *PL_markstack_ptr == SP) {
PP(pp_mapwhile)
{
- djSP;
- I32 diff = (SP - PL_stack_base) - *PL_markstack_ptr;
+ dSP;
+ I32 items = (SP - PL_stack_base) - *PL_markstack_ptr; /* how many new items */
I32 count;
I32 shift;
SV** src;
- SV** dst;
+ SV** dst;
+ /* first, move source pointer to the next item in the source list */
++PL_markstack_ptr[-1];
- if (diff) {
- if (diff > PL_markstack_ptr[-1] - PL_markstack_ptr[-2]) {
- shift = diff - (PL_markstack_ptr[-1] - PL_markstack_ptr[-2]);
- count = (SP - PL_stack_base) - PL_markstack_ptr[-1] + 2;
-
+
+ /* if there are new items, push them into the destination list */
+ if (items) {
+ /* might need to make room back there first */
+ if (items > PL_markstack_ptr[-1] - PL_markstack_ptr[-2]) {
+ /* XXX this implementation is very pessimal because the stack
+ * is repeatedly extended for every set of items. Is possible
+ * to do this without any stack extension or copying at all
+ * by maintaining a separate list over which the map iterates
+ * (like foreach does). --gsar */
+
+ /* everything in the stack after the destination list moves
+ * towards the end the stack by the amount of room needed */
+ shift = items - (PL_markstack_ptr[-1] - PL_markstack_ptr[-2]);
+
+ /* items to shift up (accounting for the moved source pointer) */
+ count = (SP - PL_stack_base) - (PL_markstack_ptr[-1] - 1);
+
+ /* This optimization is by Ben Tilly and it does
+ * things differently from what Sarathy (gsar)
+ * is describing. The downside of this optimization is
+ * that leaves "holes" (uninitialized and hopefully unused areas)
+ * to the Perl stack, but on the other hand this
+ * shouldn't be a problem. If Sarathy's idea gets
+ * implemented, this optimization should become
+ * irrelevant. --jhi */
+ if (shift < count)
+ shift = count; /* Avoid shifting too often --Ben Tilly */
+
EXTEND(SP,shift);
src = SP;
dst = (SP += shift);
PL_markstack_ptr[-1] += shift;
*PL_markstack_ptr += shift;
- while (--count)
+ while (count--)
*dst-- = *src--;
}
- dst = PL_stack_base + (PL_markstack_ptr[-2] += diff) - 1;
- ++diff;
- while (--diff)
- *dst-- = SvTEMP(TOPs) ? POPs : sv_mortalcopy(POPs);
+ /* copy the new items down to the destination list */
+ dst = PL_stack_base + (PL_markstack_ptr[-2] += items) - 1;
+ while (items--)
+ *dst-- = SvTEMP(TOPs) ? POPs : sv_mortalcopy(POPs);
}
LEAVE; /* exit inner scope */
/* All done yet? */
if (PL_markstack_ptr[-1] > *PL_markstack_ptr) {
- I32 items;
I32 gimme = GIMME_V;
(void)POPMARK; /* pop top */
ENTER; /* enter inner scope */
SAVEVPTR(PL_curpm);
+ /* set $_ to the new source item */
src = PL_stack_base[PL_markstack_ptr[-1]];
SvTEMP_off(src);
DEFSV = src;
PP(pp_sort)
{
- djSP; dMARK; dORIGMARK;
+ dSP; dMARK; dORIGMARK;
register SV **up;
SV **myorigmark = ORIGMARK;
register I32 max;
up = myorigmark + 1;
while (MARK < SP) { /* This may or may not shift down one here. */
/*SUPPRESS 560*/
- if (*up = *++MARK) { /* Weed out nulls. */
+ if ((*up = *++MARK)) { /* Weed out nulls. */
SvTEMP_off(*up);
if (!PL_sortcop && !SvPOK(*up)) {
STRLEN n_a;
CATCH_SET(TRUE);
PUSHSTACKi(PERLSI_SORT);
- if (PL_sortstash != stash) {
- PL_firstgv = gv_fetchpv("a", TRUE, SVt_PV);
- PL_secondgv = gv_fetchpv("b", TRUE, SVt_PV);
- PL_sortstash = stash;
+ if (!hasargs && !is_xsub) {
+ if (PL_sortstash != stash || !PL_firstgv || !PL_secondgv) {
+ SAVESPTR(PL_firstgv);
+ SAVESPTR(PL_secondgv);
+ PL_firstgv = gv_fetchpv("a", TRUE, SVt_PV);
+ PL_secondgv = gv_fetchpv("b", TRUE, SVt_PV);
+ PL_sortstash = stash;
+ }
+#ifdef USE_THREADS
+ sv_lock((SV *)PL_firstgv);
+ sv_lock((SV *)PL_secondgv);
+#endif
+ SAVESPTR(GvSV(PL_firstgv));
+ SAVESPTR(GvSV(PL_secondgv));
}
- SAVESPTR(GvSV(PL_firstgv));
- SAVESPTR(GvSV(PL_secondgv));
-
PUSHBLOCK(cx, CXt_NULL, PL_stack_base);
if (!(PL_op->op_flags & OPf_SPECIAL)) {
cx->cx_type = CXt_SUB;
cx->blk_sub.savearray = GvAV(PL_defgv);
GvAV(PL_defgv) = (AV*)SvREFCNT_inc(av);
#endif /* USE_THREADS */
+ cx->blk_sub.oldcurpad = PL_curpad;
cx->blk_sub.argarray = av;
}
qsortsv((myorigmark+1), max,
PP(pp_flip)
{
- djSP;
+ dSP;
if (GIMME == G_ARRAY) {
RETURNOP(((LOGOP*)cUNOP->op_first)->op_other);
else {
dTOPss;
SV *targ = PAD_SV(PL_op->op_targ);
-
- if ((PL_op->op_private & OPpFLIP_LINENUM)
- ? (PL_last_in_gv && SvIV(sv) == (IV)IoLINES(GvIOp(PL_last_in_gv)))
- : SvTRUE(sv) ) {
+ int flip;
+
+ if (PL_op->op_private & OPpFLIP_LINENUM) {
+ struct io *gp_io;
+ flip = PL_last_in_gv
+ && (gp_io = GvIOp(PL_last_in_gv))
+ && SvIV(sv) == (IV)IoLINES(gp_io);
+ } else {
+ flip = SvTRUE(sv);
+ }
+ if (flip) {
sv_setiv(PAD_SV(cUNOP->op_first->op_targ), 1);
if (PL_op->op_flags & OPf_SPECIAL) {
sv_setiv(targ, 1);
PP(pp_flop)
{
- djSP;
+ dSP;
if (GIMME == G_ARRAY) {
dPOPPOPssrl;
mg_get(right);
if (SvNIOKp(left) || !SvPOKp(left) ||
- (looks_like_number(left) && *SvPVX(left) != '0') )
+ SvNIOKp(right) || !SvPOKp(right) ||
+ (looks_like_number(left) && *SvPVX(left) != '0' &&
+ looks_like_number(right) && *SvPVX(right) != '0'))
{
if (SvNV(left) < IV_MIN || SvNV(right) > IV_MAX)
DIE(aTHX_ "Range iterator outside integer range");
STATIC I32
S_dopoptolabel(pTHX_ char *label)
{
- dTHR;
register I32 i;
register PERL_CONTEXT *cx;
cx = &cxstack[i];
switch (CxTYPE(cx)) {
case CXt_SUBST:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting substitution via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting substitution via %s",
PL_op_name[PL_op->op_type]);
break;
case CXt_SUB:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting subroutine via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting subroutine via %s",
PL_op_name[PL_op->op_type]);
break;
case CXt_FORMAT:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting format via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting format via %s",
PL_op_name[PL_op->op_type]);
break;
case CXt_EVAL:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting eval via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting eval via %s",
PL_op_name[PL_op->op_type]);
break;
case CXt_NULL:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting pseudo-block via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting pseudo-block via %s",
PL_op_name[PL_op->op_type]);
return -1;
case CXt_LOOP:
I32
Perl_block_gimme(pTHX)
{
- dTHR;
I32 cxix;
cxix = dopoptosub(cxstack_ix);
}
}
+I32
+Perl_is_lvalue_sub(pTHX)
+{
+ I32 cxix;
+
+ cxix = dopoptosub(cxstack_ix);
+ assert(cxix >= 0); /* We should only be called from inside subs */
+
+ if (cxstack[cxix].blk_sub.lval && CvLVALUE(cxstack[cxix].blk_sub.cv))
+ return cxstack[cxix].blk_sub.lval;
+ else
+ return 0;
+}
+
STATIC I32
S_dopoptosub(pTHX_ I32 startingblock)
{
- dTHR;
return dopoptosub_at(cxstack, startingblock);
}
STATIC I32
S_dopoptosub_at(pTHX_ PERL_CONTEXT *cxstk, I32 startingblock)
{
- dTHR;
I32 i;
register PERL_CONTEXT *cx;
for (i = startingblock; i >= 0; i--) {
STATIC I32
S_dopoptoeval(pTHX_ I32 startingblock)
{
- dTHR;
I32 i;
register PERL_CONTEXT *cx;
for (i = startingblock; i >= 0; i--) {
STATIC I32
S_dopoptoloop(pTHX_ I32 startingblock)
{
- dTHR;
I32 i;
register PERL_CONTEXT *cx;
for (i = startingblock; i >= 0; i--) {
cx = &cxstack[i];
switch (CxTYPE(cx)) {
case CXt_SUBST:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting substitution via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting substitution via %s",
PL_op_name[PL_op->op_type]);
break;
case CXt_SUB:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting subroutine via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting subroutine via %s",
PL_op_name[PL_op->op_type]);
break;
case CXt_FORMAT:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting format via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting format via %s",
PL_op_name[PL_op->op_type]);
break;
case CXt_EVAL:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting eval via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting eval via %s",
PL_op_name[PL_op->op_type]);
break;
case CXt_NULL:
- if (ckWARN(WARN_UNSAFE))
- Perl_warner(aTHX_ WARN_UNSAFE, "Exiting pseudo-block via %s",
+ if (ckWARN(WARN_EXITING))
+ Perl_warner(aTHX_ WARN_EXITING, "Exiting pseudo-block via %s",
PL_op_name[PL_op->op_type]);
return -1;
case CXt_LOOP:
void
Perl_dounwind(pTHX_ I32 cxix)
{
- dTHR;
register PERL_CONTEXT *cx;
- SV **newsp;
I32 optype;
while (cxstack_ix > cxix) {
STATIC void
S_free_closures(pTHX)
{
- dTHR;
SV **svp = AvARRAY(PL_comppad_name);
I32 ix;
for (ix = AvFILLp(PL_comppad_name); ix >= 0; ix--) {
else if (PL_errors)
sv_catsv(PL_errors, err);
else
- Perl_warn(aTHX_ "%_", err);
+ Perl_warn(aTHX_ "%"SVf, err);
++PL_error_count;
}
OP *
Perl_die_where(pTHX_ char *message, STRLEN msglen)
{
- dSP;
STRLEN n_a;
if (PL_in_eval) {
I32 cxix;
SvGROW(err, SvCUR(err)+sizeof(prefix)+msglen);
sv_catpvn(err, prefix, sizeof(prefix)-1);
sv_catpvn(err, message, msglen);
- if (ckWARN(WARN_UNSAFE)) {
+ if (ckWARN(WARN_MISC)) {
STRLEN start = SvCUR(err)-msglen-sizeof(prefix)+1;
- Perl_warner(aTHX_ WARN_UNSAFE, SvPVX(err)+start);
+ Perl_warner(aTHX_ WARN_MISC, SvPVX(err)+start);
}
}
}
- else
+ else {
sv_setpvn(ERRSV, message, msglen);
+ if (PL_hints & HINT_UTF8)
+ SvUTF8_on(ERRSV);
+ else
+ SvUTF8_off(ERRSV);
+ }
}
else
message = SvPVx(ERRSV, msglen);
LEAVE;
+ /* LEAVE could clobber PL_curcop (see save_re_context())
+ * XXX it might be better to find a way to avoid messing with
+ * PL_curcop in save_re_context() instead, but this is a more
+ * minimal fix --GSAR */
+ PL_curcop = cx->blk_oldcop;
+
if (optype == OP_REQUIRE) {
char* msg = SvPVx(ERRSV, n_a);
DIE(aTHX_ "%sCompilation failed in require",
PP(pp_xor)
{
- djSP; dPOPTOPssrl;
+ dSP; dPOPTOPssrl;
if (SvTRUE(left) != SvTRUE(right))
RETSETYES;
else
PP(pp_andassign)
{
- djSP;
+ dSP;
if (!SvTRUE(TOPs))
RETURN;
else
PP(pp_orassign)
{
- djSP;
+ dSP;
if (SvTRUE(TOPs))
RETURN;
else
PP(pp_caller)
{
- djSP;
+ dSP;
register I32 cxix = dopoptosub(cxstack_ix);
register PERL_CONTEXT *cx;
register PERL_CONTEXT *ccstack = cxstack;
if (MAXARG)
count = POPi;
- EXTEND(SP, 7);
+ EXTEND(SP, 10);
for (;;) {
/* we may be in a higher stacklevel, so dig down deeper */
while (cxix < 0 && top_si->si_type != PERLSI_MAIN) {
else
PUSHs(sv_2mortal(newSViv(gimme & G_ARRAY)));
if (CxTYPE(cx) == CXt_EVAL) {
+ /* eval STRING */
if (cx->blk_eval.old_op_type == OP_ENTEREVAL) {
PUSHs(cx->blk_eval.cur_text);
PUSHs(&PL_sv_no);
- }
- else if (cx->blk_eval.old_name) { /* Try blocks have old_name == 0. */
- /* Require, put the name. */
- PUSHs(sv_2mortal(newSVpv(cx->blk_eval.old_name, 0)));
+ }
+ /* require */
+ else if (cx->blk_eval.old_namesv) {
+ PUSHs(sv_2mortal(newSVsv(cx->blk_eval.old_namesv)));
PUSHs(&PL_sv_yes);
}
+ /* eval BLOCK (try blocks have old_namesv == 0) */
+ else {
+ PUSHs(&PL_sv_undef);
+ PUSHs(&PL_sv_undef);
+ }
}
else {
PUSHs(&PL_sv_undef);
PL_dbargs = GvAV(gv_AVadd(tmpgv = gv_fetchpv("DB::args", TRUE,
SVt_PVAV)));
GvMULTI_on(tmpgv);
- AvREAL_off(PL_dbargs); /* XXX Should be REIFY */
+ AvREAL_off(PL_dbargs); /* XXX should be REIFY (see av.h) */
}
if (AvMAX(PL_dbargs) < AvFILLp(ary) + off)
* use the global PL_hints) */
PUSHs(sv_2mortal(newSViv((I32)cx->blk_oldcop->op_private &
HINT_PRIVATE_MASK)));
+ {
+ SV * mask ;
+ SV * old_warnings = cx->blk_oldcop->cop_warnings ;
+
+ if (old_warnings == pWARN_NONE ||
+ (old_warnings == pWARN_STD && (PL_dowarn & G_WARN_ON) == 0))
+ mask = newSVpvn(WARN_NONEstring, WARNsize) ;
+ else if (old_warnings == pWARN_ALL ||
+ (old_warnings == pWARN_STD && PL_dowarn & G_WARN_ON))
+ mask = newSVpvn(WARN_ALLstring, WARNsize) ;
+ else
+ mask = newSVsv(old_warnings);
+ PUSHs(sv_2mortal(mask));
+ }
RETURN;
}
PP(pp_reset)
{
- djSP;
+ dSP;
char *tmps;
STRLEN n_a;
if (PL_op->op_private || SvIV(PL_DBsingle) || SvIV(PL_DBsignal) || SvIV(PL_DBtrace))
{
- djSP;
+ dSP;
register CV *cv;
register PERL_CONTEXT *cx;
I32 gimme = G_ARRAY;
if (!cv)
DIE(aTHX_ "No DB::DB routine defined");
- if (CvDEPTH(cv) >= 1 && !(PL_debug & (1<<30))) /* don't do recursive DB::DB call */
+ if (CvDEPTH(cv) >= 1 && !(PL_debug & DEBUG_DB_RECURSE_FLAG))
+ /* don't do recursive DB::DB call */
return NORMAL;
ENTER;
PP(pp_enteriter)
{
- djSP; dMARK;
+ dSP; dMARK;
register PERL_CONTEXT *cx;
I32 gimme = GIMME_V;
SV **svp;
#ifdef USE_THREADS
if (PL_op->op_flags & OPf_SPECIAL) {
- dTHR;
svp = &THREADSV(PL_op->op_targ); /* per-thread variable */
SAVEGENERICSV(*svp);
*svp = NEWSV(0,0);
else
#endif /* USE_THREADS */
if (PL_op->op_targ) {
+#ifndef USE_ITHREADS
svp = &PL_curpad[PL_op->op_targ]; /* "my" variable */
SAVESPTR(*svp);
-#ifdef USE_ITHREADS
+#else
+ SAVEPADSV(PL_op->op_targ);
iterdata = (void*)PL_op->op_targ;
cxtype |= CXp_PADVAR;
#endif
if (SvTYPE(cx->blk_loop.iterary) != SVt_PVAV) {
dPOPss;
if (SvNIOKp(sv) || !SvPOKp(sv) ||
- (looks_like_number(sv) && *SvPVX(sv) != '0')) {
+ SvNIOKp(cx->blk_loop.iterary) || !SvPOKp(cx->blk_loop.iterary) ||
+ (looks_like_number(sv) && *SvPVX(sv) != '0' &&
+ looks_like_number((SV*)cx->blk_loop.iterary) &&
+ *SvPVX(cx->blk_loop.iterary) != '0'))
+ {
if (SvNV(sv) < IV_MIN ||
SvNV((SV*)cx->blk_loop.iterary) >= IV_MAX)
DIE(aTHX_ "Range iterator outside integer range");
PP(pp_enterloop)
{
- djSP;
+ dSP;
register PERL_CONTEXT *cx;
I32 gimme = GIMME_V;
PP(pp_leaveloop)
{
- djSP;
+ dSP;
register PERL_CONTEXT *cx;
I32 gimme;
SV **newsp;
PP(pp_return)
{
- djSP; dMARK;
+ dSP; dMARK;
I32 cxix;
register PERL_CONTEXT *cx;
bool popsub2 = FALSE;
+ bool clear_errsv = FALSE;
I32 gimme;
SV **newsp;
PMOP *newpm;
popsub2 = TRUE;
break;
case CXt_EVAL:
+ if (!(PL_in_eval & EVAL_KEEPERR))
+ clear_errsv = TRUE;
POPEVAL(cx);
+ if (CxTRYBLOCK(cx))
+ break;
if (AvFILLp(PL_comppad_name) >= 0)
free_closures();
lex_end();
(MARK == SP || (gimme == G_SCALAR && !SvTRUE(*SP))) )
{
/* Unassume the success we assumed earlier. */
- char *name = cx->blk_eval.old_name;
- (void)hv_delete(GvHVn(PL_incgv), name, strlen(name), G_DISCARD);
- DIE(aTHX_ "%s did not return a true value", name);
+ SV *nsv = cx->blk_eval.old_namesv;
+ (void)hv_delete(GvHVn(PL_incgv), SvPVX(nsv), SvCUR(nsv), G_DISCARD);
+ DIE(aTHX_ "%s did not return a true value", SvPVX(nsv));
}
break;
case CXt_FORMAT:
*++newsp = SvREFCNT_inc(*SP);
FREETMPS;
sv_2mortal(*newsp);
- } else {
+ }
+ else {
+ sv = SvREFCNT_inc(*SP); /* FREETMPS could clobber it */
FREETMPS;
- *++newsp = sv_mortalcopy(*SP);
+ *++newsp = sv_mortalcopy(sv);
+ SvREFCNT_dec(sv);
}
- } else
+ }
+ else
*++newsp = (SvTEMP(*SP)) ? *SP : sv_mortalcopy(*SP);
- } else
+ }
+ else
*++newsp = sv_mortalcopy(*SP);
- } else
+ }
+ else
*++newsp = &PL_sv_undef;
}
else if (gimme == G_ARRAY) {
LEAVE;
LEAVESUB(sv);
+ if (clear_errsv)
+ sv_setpv(ERRSV,"");
return pop_return();
}
PP(pp_last)
{
- djSP;
+ dSP;
I32 cxix;
register PERL_CONTEXT *cx;
I32 pop2 = 0;
{
I32 cxix;
register PERL_CONTEXT *cx;
- I32 oldsave;
+ I32 inner;
if (PL_op->op_flags & OPf_SPECIAL) {
cxix = dopoptoloop(cxstack_ix);
if (cxix < cxstack_ix)
dounwind(cxix);
+ /* clear off anything above the scope we're re-entering, but
+ * save the rest until after a possible continue block */
+ inner = PL_scopestack_ix;
TOPBLOCK(cx);
- oldsave = PL_scopestack[PL_scopestack_ix - 1];
- LEAVE_SCOPE(oldsave);
+ if (PL_scopestack_ix < inner)
+ leave_scope(PL_scopestack[PL_scopestack_ix]);
return cx->blk_loop.next_op;
}
}
*ops = 0;
if (o->op_flags & OPf_KIDS) {
- dTHR;
/* First try all the kids at this level, since that's likeliest. */
for (kid = cUNOPo->op_first; kid; kid = kid->op_sibling) {
if ((kid->op_type == OP_NEXTSTATE || kid->op_type == OP_DBSTATE) &&
(ops[-1]->op_type != OP_NEXTSTATE &&
ops[-1]->op_type != OP_DBSTATE)))
*ops++ = kid;
- if (o = dofindlabel(kid, label, ops, oplimit))
+ if ((o = dofindlabel(kid, label, ops, oplimit)))
return o;
}
}
PP(pp_goto)
{
- djSP;
+ dSP;
OP *retop = 0;
I32 ix;
register PERL_CONTEXT *cx;
if (cxix < cxstack_ix)
dounwind(cxix);
TOPBLOCK(cx);
- if (CxTYPE(cx) == CXt_EVAL && cx->blk_eval.old_op_type == OP_ENTEREVAL)
+ if (CxTYPE(cx) == CXt_EVAL && cx->blk_eval.old_op_type == OP_ENTEREVAL)
DIE(aTHX_ "Can't goto subroutine from an eval-string");
mark = PL_stack_sp;
if (CxTYPE(cx) == CXt_SUB && cx->blk_sub.hasargs) {
}
else if (CvXSUB(cv)) { /* put GvAV(defgv) back onto stack */
AV* av;
- int i;
#ifdef USE_THREADS
av = (AV*)PL_curpad[0];
#else
PL_stack_sp--; /* There is no cv arg. */
/* Push a mark for the start of arglist */
- PUSHMARK(mark);
+ PUSHMARK(mark);
(void)(*CvXSUB(cv))(aTHXo_ cv);
/* Pop the current context like a decent sub should */
POPBLOCK(cx, PL_curpm);
#ifdef USE_THREADS
if (!cx->blk_sub.hasargs) {
AV* av = (AV*)PL_curpad[0];
-
+
items = AvFILLp(av) + 1;
if (items) {
/* Mark is at the end of the stack. */
EXTEND(SP, items);
Copy(AvARRAY(av), SP + 1, items, SV*);
SP += items;
- PUTBACK ;
+ PUTBACK ;
}
}
#endif /* USE_THREADS */
cx->blk_sub.savearray = GvAV(PL_defgv);
GvAV(PL_defgv) = (AV*)SvREFCNT_inc(av);
#endif /* USE_THREADS */
+ cx->blk_sub.oldcurpad = PL_curpad;
cx->blk_sub.argarray = av;
++mark;
*/
SV *sv = GvSV(PL_DBsub);
CV *gotocv;
-
+
if (PERLDB_SUB_NN) {
SvIVX(sv) = PTR2IV(cv); /* Already upgraded, saved */
} else {
gotoprobe = PL_main_root;
break;
}
- retop = dofindlabel(gotoprobe, label,
- enterops, enterops + GOTO_DEPTH);
- if (retop)
- break;
+ if (gotoprobe) {
+ retop = dofindlabel(gotoprobe, label,
+ enterops, enterops + GOTO_DEPTH);
+ if (retop)
+ break;
+ }
PL_lastgotoprobe = gotoprobe;
}
if (!retop)
/* Eventually we may want to stack the needed arguments
* for each op. For now, we punt on the hard ones. */
if (PL_op->op_type == OP_ENTERITER)
- DIE(aTHX_ "Can't \"goto\" into the middle of a foreach loop",
- label);
+ DIE(aTHX_ "Can't \"goto\" into the middle of a foreach loop");
CALL_FPTR(PL_op->op_ppaddr)(aTHX);
}
PL_op = oldop;
PP(pp_exit)
{
- djSP;
+ dSP;
I32 anum;
if (MAXARG < 1)
anum = 0;
else {
anum = SvIVx(POPs);
-#ifdef VMSISH_EXIT
- if (anum == 1 && VMSISH_EXIT)
+#ifdef VMS
+ if (anum == 1 && (PL_op->op_private & OPpEXIT_VMSISH))
anum = 0;
#endif
}
#ifdef NOTYET
PP(pp_nswitch)
{
- djSP;
+ dSP;
NV value = SvNVx(GvSV(cCOP->cop_gv));
register I32 match = I_32(value);
PP(pp_cswitch)
{
- djSP;
+ dSP;
register I32 match;
if (PL_multiline)
}
}
+#ifdef PERL_FLEXIBLE_EXCEPTIONS
STATIC void *
S_docatch_body(pTHX_ va_list args)
{
+ return docatch_body();
+}
+#endif
+
+STATIC void *
+S_docatch_body(pTHX)
+{
CALLRUNOPS(aTHX);
return NULL;
}
STATIC OP *
S_docatch(pTHX_ OP *o)
{
- dTHR;
int ret;
OP *oldop = PL_op;
volatile PERL_SI *cursi = PL_curstackinfo;
assert(CATCH_GET == TRUE);
#endif
PL_op = o;
+#ifdef PERL_FLEXIBLE_EXCEPTIONS
redo_body:
CALLPROTECT(aTHX_ pcur_env, &ret, MEMBER_TO_FPTR(S_docatch_body));
+#else
+ JMPENV_PUSH(ret);
+#endif
switch (ret) {
case 0:
+#ifndef PERL_FLEXIBLE_EXCEPTIONS
+ redo_body:
+ docatch_body();
+#endif
break;
case 3:
if (PL_restartop && cursi == PL_curstackinfo) {
}
/* FALL THROUGH */
default:
+ JMPENV_POP;
PL_op = oldop;
JMPENV_JUMP(ret);
/* NOTREACHED */
}
+ JMPENV_POP;
PL_op = oldop;
return Nullop;
}
I32 gimme = 0; /* SUSPECT - INITIALZE TO WHAT? NI-S */
I32 optype;
OP dummy;
- OP *oop = PL_op, *rop;
- char tmpbuf[TYPE_DIGITS(long) + 12 + 10];
+ OP *rop;
+ char tbuf[TYPE_DIGITS(long) + 12 + 10];
+ char *tmpbuf = tbuf;
char *safestr;
ENTER;
/* switch to eval mode */
if (PL_curcop == &PL_compiling) {
- SAVECOPSTASH(&PL_compiling);
+ SAVECOPSTASH_FREE(&PL_compiling);
CopSTASH_set(&PL_compiling, PL_curstash);
}
- SAVECOPFILE(&PL_compiling);
- SAVECOPLINE(&PL_compiling);
- sprintf(tmpbuf, "_<(%.10s_eval %lu)", code, (unsigned long)++PL_evalseq);
+ if (PERLDB_NAMEEVAL && CopLINE(PL_curcop)) {
+ SV *sv = sv_newmortal();
+ Perl_sv_setpvf(aTHX_ sv, "_<(%.10seval %lu)[%s:%"IVdf"]",
+ code, (unsigned long)++PL_evalseq,
+ CopFILE(PL_curcop), (IV)CopLINE(PL_curcop));
+ tmpbuf = SvPVX(sv);
+ }
+ else
+ sprintf(tmpbuf, "_<(%.10s_eval %lu)", code, (unsigned long)++PL_evalseq);
+ SAVECOPFILE_FREE(&PL_compiling);
CopFILE_set(&PL_compiling, tmpbuf+2);
+ SAVECOPLINE(&PL_compiling);
CopLINE_set(&PL_compiling, 1);
/* XXX For C<eval "...">s within BEGIN {} blocks, this ends up
deleting the eval's FILEGV from the stash before gv_check() runs
#else
SAVEVPTR(PL_op);
#endif
- PL_hints = 0;
+ PL_hints &= HINT_UTF8;
PL_op = &dummy;
PL_op->op_type = OP_ENTEREVAL;
PL_op->op_flags = 0; /* Avoid uninit warning. */
- PUSHBLOCK(cx, CXt_EVAL, SP);
+ PUSHBLOCK(cx, CXt_EVAL|(PL_curcop == &PL_compiling ? 0 : CXp_REAL), SP);
PUSHEVAL(cx, 0, Nullgv);
rop = doeval(G_SCALAR, startop);
POPBLOCK(cx,PL_curpm);
AV* comppadlist;
I32 i;
- PL_in_eval = EVAL_INEVAL;
+ PL_in_eval = ((saveop && saveop->op_type == OP_REQUIRE)
+ ? (EVAL_INREQUIRE | (PL_in_eval & EVAL_INEVAL))
+ : EVAL_INEVAL);
PUSHMARK(SP);
av_store(comppadlist, 1, (SV*)PL_comppad);
CvPADLIST(PL_compcv) = comppadlist;
- if (!saveop || saveop->op_type != OP_REQUIRE)
+ if (!saveop ||
+ (saveop->op_type != OP_REQUIRE && saveop->op_type != OP_DOFILE))
+ {
CvOUTSIDE(PL_compcv) = (CV*)SvREFCNT_inc(caller);
+ }
SAVEFREESV(PL_compcv);
SAVESPTR(PL_beginav);
PL_beginav = newAV();
SAVEFREESV(PL_beginav);
+ SAVEI32(PL_error_count);
/* try to compile it */
CvDEPTH(PL_compcv) = 1;
SP = PL_stack_base + POPMARK; /* pop original mark */
PL_op = saveop; /* The caller may need it. */
+ PL_lex_state = LEX_NOTPARSING; /* $^S needs this. */
#ifdef USE_THREADS
MUTEX_LOCK(&PL_eval_mutex);
PL_eval_owner = 0;
PP(pp_require)
{
- djSP;
+ dSP;
register PERL_CONTEXT *cx;
SV *sv;
char *name;
SV *filter_sub = 0;
sv = POPs;
- if (SvNIOKp(sv) && !SvPOKp(sv)) {
- if (Atof(PL_patchlevel) + 0.00000999 < SvNV(sv))
- DIE(aTHX_ "Perl %s required--this is only version %s, stopped",
- SvPV(sv,n_a),PL_patchlevel);
- RETPUSHYES;
+ if (SvNIOKp(sv)) {
+ if (SvPOK(sv) && SvNOK(sv)) { /* require v5.6.1 */
+ UV rev = 0, ver = 0, sver = 0;
+ STRLEN len;
+ U8 *s = (U8*)SvPVX(sv);
+ U8 *end = (U8*)SvPVX(sv) + SvCUR(sv);
+ if (s < end) {
+ rev = utf8n_to_uvchr(s, end - s, &len, 0);
+ s += len;
+ if (s < end) {
+ ver = utf8n_to_uvchr(s, end - s, &len, 0);
+ s += len;
+ if (s < end)
+ sver = utf8n_to_uvchr(s, end - s, &len, 0);
+ }
+ }
+ if (PERL_REVISION < rev
+ || (PERL_REVISION == rev
+ && (PERL_VERSION < ver
+ || (PERL_VERSION == ver
+ && PERL_SUBVERSION < sver))))
+ {
+ DIE(aTHX_ "Perl v%"UVuf".%"UVuf".%"UVuf" required--this is only "
+ "v%d.%d.%d, stopped", rev, ver, sver, PERL_REVISION,
+ PERL_VERSION, PERL_SUBVERSION);
+ }
+ RETPUSHYES;
+ }
+ else if (!SvPOKp(sv)) { /* require 5.005_03 */
+ if ((NV)PERL_REVISION + ((NV)PERL_VERSION/(NV)1000)
+ + ((NV)PERL_SUBVERSION/(NV)1000000)
+ + 0.00000099 < SvNV(sv))
+ {
+ NV nrev = SvNV(sv);
+ UV rev = (UV)nrev;
+ NV nver = (nrev - rev) * 1000;
+ UV ver = (UV)(nver + 0.0009);
+ NV nsver = (nver - ver) * 1000;
+ UV sver = (UV)(nsver + 0.0009);
+
+ /* help out with the "use 5.6" confusion */
+ if (sver == 0 && (rev > 5 || (rev == 5 && ver >= 100))) {
+ DIE(aTHX_ "Perl v%"UVuf".%"UVuf".%"UVuf" required--"
+ "this is only v%d.%d.%d, stopped"
+ " (did you mean v%"UVuf".%"UVuf".0?)",
+ rev, ver, sver, PERL_REVISION, PERL_VERSION,
+ PERL_SUBVERSION, rev, ver/100);
+ }
+ else {
+ DIE(aTHX_ "Perl v%"UVuf".%"UVuf".%"UVuf" required--"
+ "this is only v%d.%d.%d, stopped",
+ rev, ver, sver, PERL_REVISION, PERL_VERSION,
+ PERL_SUBVERSION);
+ }
+ }
+ RETPUSHYES;
+ }
}
name = SvPV(sv, len);
if (!(name && len > 0 && *name))
/* prepare to compile file */
+#ifdef MACOS_TRADITIONAL
+ if (PERL_FILE_IS_ABSOLUTE(name)
+ || (*name == ':' && name[1] != ':' && strchr(name+2, ':')))
+ {
+ tryname = name;
+ tryrsfp = doopen_pmc(name,PERL_SCRIPT_MODE);
+ /* We consider paths of the form :a:b ambiguous and interpret them first
+ as global then as local
+ */
+ if (!tryrsfp && *name == ':' && name[1] != ':' && strchr(name+2, ':'))
+ goto trylocal;
+ }
+ else
+trylocal: {
+#else
if (PERL_FILE_IS_ABSOLUTE(name)
|| (*name == '.' && (name[1] == '/' ||
(name[1] == '.' && name[2] == '/'))))
tryrsfp = doopen_pmc(name,PERL_SCRIPT_MODE);
}
else {
+#endif
AV *ar = GvAVn(PL_incgv);
I32 i;
#ifdef VMS
PUSHs(dirsv);
PUSHs(sv);
PUTBACK;
- count = call_sv(loader, G_ARRAY);
+ if (sv_isobject(loader))
+ count = call_method("INC", G_ARRAY);
+ else
+ count = call_sv(loader, G_ARRAY);
SPAGAIN;
if (count > 0) {
if (io) {
tryrsfp = IoIFP(io);
- if (IoTYPE(io) == '|') {
+ if (IoTYPE(io) == IoTYPE_PIPE) {
/* reading from a child process doesn't
nest -- when returning from reading
the inner module, the outer one is
}
else {
char *dir = SvPVx(dirsv, n_a);
+#ifdef MACOS_TRADITIONAL
+ char buf[256];
+ Perl_sv_setpvf(aTHX_ namesv, "%s%s", MacPerl_CanonDir(dir, buf), name+(name[0] == ':'));
+#else
#ifdef VMS
char *unixdir;
if ((unixdir = tounixpath(dir, Nullch)) == Nullch)
#else
Perl_sv_setpvf(aTHX_ namesv, "%s/%s", dir, name);
#endif
+#endif
TAINT_PROPER("require");
tryname = SvPVX(namesv);
+#ifdef MACOS_TRADITIONAL
+ {
+ /* Convert slashes in the name part, but not the directory part, to colons */
+ char * colon;
+ for (colon = tryname+strlen(dir); colon = strchr(colon, '/'); )
+ *colon++ = ':';
+ }
+#endif
tryrsfp = doopen_pmc(tryname, PERL_SCRIPT_MODE);
if (tryrsfp) {
if (tryname[0] == '.' && tryname[1] == '/')
}
}
}
- SAVECOPFILE(&PL_compiling);
+ SAVECOPFILE_FREE(&PL_compiling);
CopFILE_set(&PL_compiling, tryrsfp ? tryname : name);
SvREFCNT_dec(namesv);
if (!tryrsfp) {
PL_hints = 0;
SAVESPTR(PL_compiling.cop_warnings);
if (PL_dowarn & G_WARN_ALL_ON)
- PL_compiling.cop_warnings = WARN_ALL ;
+ PL_compiling.cop_warnings = pWARN_ALL ;
else if (PL_dowarn & G_WARN_ALL_OFF)
- PL_compiling.cop_warnings = WARN_NONE ;
- else
- PL_compiling.cop_warnings = WARN_STD ;
+ PL_compiling.cop_warnings = pWARN_NONE ;
+ else
+ PL_compiling.cop_warnings = pWARN_STD ;
+ SAVESPTR(PL_compiling.cop_io);
+ PL_compiling.cop_io = Nullsv;
if (filter_sub || filter_child_proc) {
SV *datasv = filter_add(run_user_filter, Nullsv);
PP(pp_entereval)
{
- djSP;
+ dSP;
register PERL_CONTEXT *cx;
dPOPss;
I32 gimme = GIMME_V, was = PL_sub_generation;
- char tmpbuf[TYPE_DIGITS(long) + 12];
+ char tbuf[TYPE_DIGITS(long) + 12];
+ char *tmpbuf = tbuf;
char *safestr;
STRLEN len;
OP *ret;
ENTER;
lex_start(sv);
SAVETMPS;
-
+
/* switch to eval mode */
- SAVECOPFILE(&PL_compiling);
- sprintf(tmpbuf, "_<(eval %lu)", (unsigned long)++PL_evalseq);
+ if (PERLDB_NAMEEVAL && CopLINE(PL_curcop)) {
+ SV *sv = sv_newmortal();
+ Perl_sv_setpvf(aTHX_ sv, "_<(eval %lu)[%s:%"IVdf"]",
+ (unsigned long)++PL_evalseq,
+ CopFILE(PL_curcop), (IV)CopLINE(PL_curcop));
+ tmpbuf = SvPVX(sv);
+ }
+ else
+ sprintf(tmpbuf, "_<(eval %lu)", (unsigned long)++PL_evalseq);
+ SAVECOPFILE_FREE(&PL_compiling);
CopFILE_set(&PL_compiling, tmpbuf+2);
+ SAVECOPLINE(&PL_compiling);
CopLINE_set(&PL_compiling, 1);
/* XXX For C<eval "...">s within BEGIN {} blocks, this ends up
deleting the eval's FILEGV from the stash before gv_check() runs
SAVEHINTS();
PL_hints = PL_op->op_targ;
SAVESPTR(PL_compiling.cop_warnings);
- if (!specialWARN(PL_compiling.cop_warnings)) {
- PL_compiling.cop_warnings = newSVsv(PL_compiling.cop_warnings) ;
- SAVEFREESV(PL_compiling.cop_warnings) ;
+ if (specialWARN(PL_curcop->cop_warnings))
+ PL_compiling.cop_warnings = PL_curcop->cop_warnings;
+ else {
+ PL_compiling.cop_warnings = newSVsv(PL_curcop->cop_warnings);
+ SAVEFREESV(PL_compiling.cop_warnings);
+ }
+ SAVESPTR(PL_compiling.cop_io);
+ if (specialCopIO(PL_curcop->cop_io))
+ PL_compiling.cop_io = PL_curcop->cop_io;
+ else {
+ PL_compiling.cop_io = newSVsv(PL_curcop->cop_io);
+ SAVEFREESV(PL_compiling.cop_io);
}
push_return(PL_op->op_next);
PP(pp_leaveeval)
{
- djSP;
+ dSP;
register SV **mark;
SV **newsp;
PMOP *newpm;
!(gimme == G_SCALAR ? SvTRUE(*SP) : SP > newsp))
{
/* Unassume the success we assumed earlier. */
- char *name = cx->blk_eval.old_name;
- (void)hv_delete(GvHVn(PL_incgv), name, strlen(name), G_DISCARD);
- retop = Perl_die(aTHX_ "%s did not return a true value", name);
+ SV *nsv = cx->blk_eval.old_namesv;
+ (void)hv_delete(GvHVn(PL_incgv), SvPVX(nsv), SvCUR(nsv), G_DISCARD);
+ retop = Perl_die(aTHX_ "%s did not return a true value", SvPVX(nsv));
/* die_where() did LEAVE, or we won't be here */
}
else {
PP(pp_entertry)
{
- djSP;
+ dSP;
register PERL_CONTEXT *cx;
I32 gimme = GIMME_V;
SAVETMPS;
push_return(cLOGOP->op_other->op_next);
- PUSHBLOCK(cx, CXt_EVAL, SP);
+ PUSHBLOCK(cx, (CXt_EVAL|CXp_TRYBLOCK), SP);
PUSHEVAL(cx, 0, 0);
PL_eval_root = PL_op; /* Only needed so that goto works right. */
PP(pp_leavetry)
{
- djSP;
+ dSP;
register SV **mark;
SV **newsp;
PMOP *newpm;
if (len == 0)
Perl_croak(aTHX_ "Null picture in formline");
-
+
New(804, fops, (send - s)*3+10, U16); /* Almost certainly too long... */
fpc = fops;
case ' ': case '\t':
skipspaces++;
continue;
-
+
case '\n': case 0:
arg = s - base;
skipspaces++;
}
*fpc++ = s - base; /* fieldsize for FETCH */
*fpc++ = FF_DECIMAL;
+ *fpc++ = arg;
+ }
+ else if (*s == '0' && s[1] == '#') { /* Zero padded decimals */
+ arg = ischop ? 512 : 0;
+ base = s - 1;
+ s++; /* skip the '0' first */
+ while (*s == '#')
+ s++;
+ if (*s == '.') {
+ char *f;
+ s++;
+ f = s;
+ while (*s == '#')
+ s++;
+ arg |= 256 + (s - f);
+ }
+ *fpc++ = s - base; /* fieldsize for FETCH */
+ *fpc++ = FF_0DECIMAL;
*fpc++ = arg;
}
else {
}
/*
- * The rest of this file was derived from source code contributed
- * by Tom Horsley.
+ * The mergesort implementation is by Peter M. Mcilroy <pmcilroy@lucent.com>.
+ *
+ * The original code was written in conjunction with BSD Computer Software
+ * Research Group at University of California, Berkeley.
+ *
+ * See also: "Optimistic Merge Sort" (SODA '92)
+ *
+ * The integration to Perl is by John P. Linderman <jpl@research.att.com>.
+ *
+ * The code can be distributed under the same terms as Perl itself.
*
- * NOTE: this code was derived from Tom Horsley's qsort replacement
- * and should not be confused with the original code.
*/
-/* Copyright (C) Tom Horsley, 1997. All rights reserved.
-
- Permission granted to distribute under the same terms as perl which are
- (briefly):
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of either:
-
- a) the GNU General Public License as published by the Free
- Software Foundation; either version 1, or (at your option) any
- later version, or
-
- b) the "Artistic License" which comes with this Kit.
-
- Details on the perl license can be found in the perl source code which
- may be located via the www.perl.com web page.
-
- This is the most wonderfulest possible qsort I can come up with (and
- still be mostly portable) My (limited) tests indicate it consistently
- does about 20% fewer calls to compare than does the qsort in the Visual
- C++ library, other vendors may vary.
+#ifdef TESTHARNESS
+#include <sys/types.h>
+typedef void SV;
+#define pTHXo_
+#define pTHX_
+#define STATIC
+#define New(ID,VAR,N,TYPE) VAR=(TYPE *)malloc((N)*sizeof(TYPE))
+#define Safefree(VAR) free(VAR)
+typedef int (*SVCOMPARE_t) (pTHXo_ SV*, SV*);
+#endif /* TESTHARNESS */
+
+typedef char * aptr; /* pointer for arithmetic on sizes */
+typedef SV * gptr; /* pointers in our lists */
+
+/* Binary merge internal sort, with a few special mods
+** for the special perl environment it now finds itself in.
+**
+** Things that were once options have been hotwired
+** to values suitable for this use. In particular, we'll always
+** initialize looking for natural runs, we'll always produce stable
+** output, and we'll always do Peter McIlroy's binary merge.
+*/
- Some of the ideas in here can be found in "Algorithms" by Sedgewick,
- others I invented myself (or more likely re-invented since they seemed
- pretty obvious once I watched the algorithm operate for a while).
+/* Pointer types for arithmetic and storage and convenience casts */
- Most of this code was written while watching the Marlins sweep the Giants
- in the 1997 National League Playoffs - no Braves fans allowed to use this
- code (just kidding :-).
+#define APTR(P) ((aptr)(P))
+#define GPTP(P) ((gptr *)(P))
+#define GPPP(P) ((gptr **)(P))
- I realize that if I wanted to be true to the perl tradition, the only
- comment in this file would be something like:
- ...they shuffled back towards the rear of the line. 'No, not at the
- rear!' the slave-driver shouted. 'Three files up. And stay there...
+/* byte offset from pointer P to (larger) pointer Q */
+#define BYTEOFF(P, Q) (APTR(Q) - APTR(P))
- However, I really needed to violate that tradition just so I could keep
- track of what happens myself, not to mention some poor fool trying to
- understand this years from now :-).
-*/
+#define PSIZE sizeof(gptr)
-/* ********************************************************** Configuration */
+/* If PSIZE is power of 2, make PSHIFT that power, if that helps */
-#ifndef QSORT_ORDER_GUESS
-#define QSORT_ORDER_GUESS 2 /* Select doubling version of the netBSD trick */
+#ifdef PSHIFT
+#define PNELEM(P, Q) (BYTEOFF(P,Q) >> (PSHIFT))
+#define PNBYTE(N) ((N) << (PSHIFT))
+#define PINDEX(P, N) (GPTP(APTR(P) + PNBYTE(N)))
+#else
+/* Leave optimization to compiler */
+#define PNELEM(P, Q) (GPTP(Q) - GPTP(P))
+#define PNBYTE(N) ((N) * (PSIZE))
+#define PINDEX(P, N) (GPTP(P) + (N))
#endif
-/* QSORT_MAX_STACK is the largest number of partitions that can be stacked up for
- future processing - a good max upper bound is log base 2 of memory size
- (32 on 32 bit machines, 64 on 64 bit machines, etc). In reality can
- safely be smaller than that since the program is taking up some space and
- most operating systems only let you grab some subset of contiguous
- memory (not to mention that you are normally sorting data larger than
- 1 byte element size :-).
-*/
-#ifndef QSORT_MAX_STACK
-#define QSORT_MAX_STACK 32
-#endif
+/* Pointer into other corresponding to pointer into this */
+#define POTHER(P, THIS, OTHER) GPTP(APTR(OTHER) + BYTEOFF(THIS,P))
-/* QSORT_BREAK_EVEN is the size of the largest partition we should insertion sort.
- Anything bigger and we use qsort. If you make this too small, the qsort
- will probably break (or become less efficient), because it doesn't expect
- the middle element of a partition to be the same as the right or left -
- you have been warned).
-*/
-#ifndef QSORT_BREAK_EVEN
-#define QSORT_BREAK_EVEN 6
-#endif
+#define FROMTOUPTO(src, dst, lim) do *dst++ = *src++; while(src<lim)
-/* ************************************************************* Data Types */
-/* hold left and right index values of a partition waiting to be sorted (the
- partition includes both left and right - right is NOT one past the end or
- anything like that).
+/* Runs are identified by a pointer in the auxilliary list.
+** The pointer is at the start of the list,
+** and it points to the start of the next list.
+** NEXT is used as an lvalue, too.
*/
-struct partition_stack_entry {
- int left;
- int right;
-#ifdef QSORT_ORDER_GUESS
- int qsort_break_even;
-#endif
-};
-/* ******************************************************* Shorthand Macros */
+#define NEXT(P) (*GPPP(P))
-/* Note that these macros will be used from inside the qsort function where
- we happen to know that the variable 'elt_size' contains the size of an
- array element and the variable 'temp' points to enough space to hold a
- temp element and the variable 'array' points to the array being sorted
- and 'compare' is the pointer to the compare routine.
- Also note that there are very many highly architecture specific ways
- these might be sped up, but this is simply the most generally portable
- code I could think of.
+/* PTHRESH is the minimum number of pairs with the same sense to justify
+** checking for a run and extending it. Note that PTHRESH counts PAIRS,
+** not just elements, so PTHRESH == 8 means a run of 16.
*/
-/* Return < 0 == 0 or > 0 as the value of elt1 is < elt2, == elt2, > elt2
-*/
-#define qsort_cmp(elt1, elt2) \
- ((*compare)(aTHXo_ array[elt1], array[elt2]))
+#define PTHRESH (8)
-#ifdef QSORT_ORDER_GUESS
-#define QSORT_NOTICE_SWAP swapped++;
-#else
-#define QSORT_NOTICE_SWAP
-#endif
-
-/* swaps contents of array elements elt1, elt2.
+/* RTHRESH is the number of elements in a run that must compare low
+** to the low element from the opposing run before we justify
+** doing a binary rampup instead of single stepping.
+** In random input, N in a row low should only happen with
+** probability 2^(1-N), so we can risk that we are dealing
+** with orderly input without paying much when we aren't.
*/
-#define qsort_swap(elt1, elt2) \
- STMT_START { \
- QSORT_NOTICE_SWAP \
- temp = array[elt1]; \
- array[elt1] = array[elt2]; \
- array[elt2] = temp; \
- } STMT_END
-
-/* rotate contents of elt1, elt2, elt3 such that elt1 gets elt2, elt2 gets
- elt3 and elt3 gets elt1.
-*/
-#define qsort_rotate(elt1, elt2, elt3) \
- STMT_START { \
- QSORT_NOTICE_SWAP \
- temp = array[elt1]; \
- array[elt1] = array[elt2]; \
- array[elt2] = array[elt3]; \
- array[elt3] = temp; \
- } STMT_END
-/* ************************************************************ Debug stuff */
+#define RTHRESH (6)
-#ifdef QSORT_DEBUG
-static void
-break_here()
-{
- return; /* good place to set a breakpoint */
-}
+/*
+** Overview of algorithm and variables.
+** The array of elements at list1 will be organized into runs of length 2,
+** or runs of length >= 2 * PTHRESH. We only try to form long runs when
+** PTHRESH adjacent pairs compare in the same way, suggesting overall order.
+**
+** Unless otherwise specified, pair pointers address the first of two elements.
+**
+** b and b+1 are a pair that compare with sense ``sense''.
+** b is the ``bottom'' of adjacent pairs that might form a longer run.
+**
+** p2 parallels b in the list2 array, where runs are defined by
+** a pointer chain.
+**
+** t represents the ``top'' of the adjacent pairs that might extend
+** the run beginning at b. Usually, t addresses a pair
+** that compares with opposite sense from (b,b+1).
+** However, it may also address a singleton element at the end of list1,
+** or it may be equal to ``last'', the first element beyond list1.
+**
+** r addresses the Nth pair following b. If this would be beyond t,
+** we back it off to t. Only when r is less than t do we consider the
+** run long enough to consider checking.
+**
+** q addresses a pair such that the pairs at b through q already form a run.
+** Often, q will equal b, indicating we only are sure of the pair itself.
+** However, a search on the previous cycle may have revealed a longer run,
+** so q may be greater than b.
+**
+** p is used to work back from a candidate r, trying to reach q,
+** which would mean b through r would be a run. If we discover such a run,
+** we start q at r and try to push it further towards t.
+** If b through r is NOT a run, we detect the wrong order at (p-1,p).
+** In any event, after the check (if any), we have two main cases.
+**
+** 1) Short run. b <= q < p <= r <= t.
+** b through q is a run (perhaps trivial)
+** q through p are uninteresting pairs
+** p through r is a run
+**
+** 2) Long run. b < r <= q < t.
+** b through q is a run (of length >= 2 * PTHRESH)
+**
+** Note that degenerate cases are not only possible, but likely.
+** For example, if the pair following b compares with opposite sense,
+** then b == q < p == r == t.
+*/
-#define qsort_assert(t) (void)( (t) || (break_here(), 0) )
static void
-doqsort_all_asserts(
- void * array,
- size_t num_elts,
- size_t elt_size,
- int (*compare)(const void * elt1, const void * elt2),
- int pc_left, int pc_right, int u_left, int u_right)
+dynprep(pTHX_ gptr *list1, gptr *list2, size_t nmemb, SVCOMPARE_t cmp)
{
- int i;
-
- qsort_assert(pc_left <= pc_right);
- qsort_assert(u_right < pc_left);
- qsort_assert(pc_right < u_left);
- for (i = u_right + 1; i < pc_left; ++i) {
- qsort_assert(qsort_cmp(i, pc_left) < 0);
- }
- for (i = pc_left; i < pc_right; ++i) {
- qsort_assert(qsort_cmp(i, pc_right) == 0);
- }
- for (i = pc_right + 1; i < u_left; ++i) {
- qsort_assert(qsort_cmp(pc_right, i) < 0);
- }
+ int sense;
+ register gptr *b, *p, *q, *t, *p2;
+ register gptr c, *last, *r;
+ gptr *savep;
+
+ b = list1;
+ last = PINDEX(b, nmemb);
+ sense = (cmp(aTHX_ *b, *(b+1)) > 0);
+ for (p2 = list2; b < last; ) {
+ /* We just started, or just reversed sense.
+ ** Set t at end of pairs with the prevailing sense.
+ */
+ for (p = b+2, t = p; ++p < last; t = ++p) {
+ if ((cmp(aTHX_ *t, *p) > 0) != sense) break;
+ }
+ q = b;
+ /* Having laid out the playing field, look for long runs */
+ do {
+ p = r = b + (2 * PTHRESH);
+ if (r >= t) p = r = t; /* too short to care about */
+ else {
+ while (((cmp(aTHX_ *(p-1), *p) > 0) == sense) &&
+ ((p -= 2) > q));
+ if (p <= q) {
+ /* b through r is a (long) run.
+ ** Extend it as far as possible.
+ */
+ p = q = r;
+ while (((p += 2) < t) &&
+ ((cmp(aTHX_ *(p-1), *p) > 0) == sense)) q = p;
+ r = p = q + 2; /* no simple pairs, no after-run */
+ }
+ }
+ if (q > b) { /* run of greater than 2 at b */
+ savep = p;
+ p = q += 2;
+ /* pick up singleton, if possible */
+ if ((p == t) &&
+ ((t + 1) == last) &&
+ ((cmp(aTHX_ *(p-1), *p) > 0) == sense))
+ savep = r = p = q = last;
+ p2 = NEXT(p2) = p2 + (p - b);
+ if (sense) while (b < --p) {
+ c = *b;
+ *b++ = *p;
+ *p = c;
+ }
+ p = savep;
+ }
+ while (q < p) { /* simple pairs */
+ p2 = NEXT(p2) = p2 + 2;
+ if (sense) {
+ c = *q++;
+ *(q-1) = *q;
+ *q++ = c;
+ } else q += 2;
+ }
+ if (((b = p) == t) && ((t+1) == last)) {
+ NEXT(p2) = p2 + 1;
+ b++;
+ }
+ q = r;
+ } while (b < t);
+ sense = !sense;
+ }
+ return;
}
-#define qsort_all_asserts(PC_LEFT, PC_RIGHT, U_LEFT, U_RIGHT) \
- doqsort_all_asserts(array, num_elts, elt_size, compare, \
- PC_LEFT, PC_RIGHT, U_LEFT, U_RIGHT)
-#else
+/* Overview of bmerge variables:
+**
+** list1 and list2 address the main and auxiliary arrays.
+** They swap identities after each merge pass.
+** Base points to the original list1, so we can tell if
+** the pointers ended up where they belonged (or must be copied).
+**
+** When we are merging two lists, f1 and f2 are the next elements
+** on the respective lists. l1 and l2 mark the end of the lists.
+** tp2 is the current location in the merged list.
+**
+** p1 records where f1 started.
+** After the merge, a new descriptor is built there.
+**
+** p2 is a ``parallel'' pointer in (what starts as) descriptor space.
+** It is used to identify and delimit the runs.
+**
+** In the heat of determining where q, the greater of the f1/f2 elements,
+** belongs in the other list, b, t and p, represent bottom, top and probe
+** locations, respectively, in the other list.
+** They make convenient temporary pointers in other places.
+*/
-#define qsort_assert(t) ((void)0)
+STATIC void
+S_qsortsv(pTHX_ gptr *list1, size_t nmemb, SVCOMPARE_t cmp)
+{
+ int i, run;
+ int sense;
+ register gptr *f1, *f2, *t, *b, *p, *tp2, *l1, *l2, *q;
+ gptr *aux, *list2, *p2, *last;
+ gptr *base = list1;
+ gptr *p1;
+
+ if (nmemb <= 1) return; /* sorted trivially */
+ New(799,list2,nmemb,gptr); /* allocate auxilliary array */
+ aux = list2;
+ dynprep(aTHX_ list1, list2, nmemb, cmp);
+ last = PINDEX(list2, nmemb);
+ while (NEXT(list2) != last) {
+ /* More than one run remains. Do some merging to reduce runs. */
+ l2 = p1 = list1;
+ for (tp2 = p2 = list2; p2 != last;) {
+ /* The new first run begins where the old second list ended.
+ ** Use the p2 ``parallel'' pointer to identify the end of the run.
+ */
+ f1 = l2;
+ t = NEXT(p2);
+ f2 = l1 = POTHER(t, list2, list1);
+ if (t != last) t = NEXT(t);
+ l2 = POTHER(t, list2, list1);
+ p2 = t;
+ while (f1 < l1 && f2 < l2) {
+ /* If head 1 is larger than head 2, find ALL the elements
+ ** in list 2 strictly less than head1, write them all,
+ ** then head 1. Then compare the new heads, and repeat,
+ ** until one or both lists are exhausted.
+ **
+ ** In all comparisons (after establishing
+ ** which head to merge) the item to merge
+ ** (at pointer q) is the first operand of
+ ** the comparison. When we want to know
+ ** if ``q is strictly less than the other'',
+ ** we can't just do
+ ** cmp(q, other) < 0
+ ** because stability demands that we treat equality
+ ** as high when q comes from l2, and as low when
+ ** q was from l1. So we ask the question by doing
+ ** cmp(q, other) <= sense
+ ** and make sense == 0 when equality should look low,
+ ** and -1 when equality should look high.
+ */
+
+
+ if (cmp(aTHX_ *f1, *f2) <= 0) {
+ q = f2; b = f1; t = l1;
+ sense = -1;
+ } else {
+ q = f1; b = f2; t = l2;
+ sense = 0;
+ }
-#define qsort_all_asserts(PC_LEFT, PC_RIGHT, U_LEFT, U_RIGHT) ((void)0)
-#endif
+ /* ramp up
+ **
+ ** Leave t at something strictly
+ ** greater than q (or at the end of the list),
+ ** and b at something strictly less than q.
+ */
+ for (i = 1, run = 0 ;;) {
+ if ((p = PINDEX(b, i)) >= t) {
+ /* off the end */
+ if (((p = PINDEX(t, -1)) > b) &&
+ (cmp(aTHX_ *q, *p) <= sense))
+ t = p;
+ else b = p;
+ break;
+ } else if (cmp(aTHX_ *q, *p) <= sense) {
+ t = p;
+ break;
+ } else b = p;
+ if (++run >= RTHRESH) i += i;
+ }
-/* ****************************************************************** qsort */
-STATIC void
-S_qsortsv(pTHX_ SV ** array, size_t num_elts, SVCOMPARE_t compare)
-{
- register SV * temp;
-
- struct partition_stack_entry partition_stack[QSORT_MAX_STACK];
- int next_stack_entry = 0;
+ /* q is known to follow b and must be inserted before t.
+ ** Increment b, so the range of possibilities is [b,t).
+ ** Round binary split down, to favor early appearance.
+ ** Adjust b and t until q belongs just before t.
+ */
- int part_left;
- int part_right;
-#ifdef QSORT_ORDER_GUESS
- int qsort_break_even;
- int swapped;
-#endif
+ b++;
+ while (b < t) {
+ p = PINDEX(b, (PNELEM(b, t) - 1) / 2);
+ if (cmp(aTHX_ *q, *p) <= sense) {
+ t = p;
+ } else b = p + 1;
+ }
- /* Make sure we actually have work to do.
- */
- if (num_elts <= 1) {
- return;
- }
-
- /* Setup the initial partition definition and fall into the sorting loop
- */
- part_left = 0;
- part_right = (int)(num_elts - 1);
-#ifdef QSORT_ORDER_GUESS
- qsort_break_even = QSORT_BREAK_EVEN;
-#else
-#define qsort_break_even QSORT_BREAK_EVEN
-#endif
- for ( ; ; ) {
- if ((part_right - part_left) >= qsort_break_even) {
- /* OK, this is gonna get hairy, so lets try to document all the
- concepts and abbreviations and variables and what they keep
- track of:
-
- pc: pivot chunk - the set of array elements we accumulate in the
- middle of the partition, all equal in value to the original
- pivot element selected. The pc is defined by:
-
- pc_left - the leftmost array index of the pc
- pc_right - the rightmost array index of the pc
-
- we start with pc_left == pc_right and only one element
- in the pivot chunk (but it can grow during the scan).
-
- u: uncompared elements - the set of elements in the partition
- we have not yet compared to the pivot value. There are two
- uncompared sets during the scan - one to the left of the pc
- and one to the right.
-
- u_right - the rightmost index of the left side's uncompared set
- u_left - the leftmost index of the right side's uncompared set
-
- The leftmost index of the left sides's uncompared set
- doesn't need its own variable because it is always defined
- by the leftmost edge of the whole partition (part_left). The
- same goes for the rightmost edge of the right partition
- (part_right).
-
- We know there are no uncompared elements on the left once we
- get u_right < part_left and no uncompared elements on the
- right once u_left > part_right. When both these conditions
- are met, we have completed the scan of the partition.
-
- Any elements which are between the pivot chunk and the
- uncompared elements should be less than the pivot value on
- the left side and greater than the pivot value on the right
- side (in fact, the goal of the whole algorithm is to arrange
- for that to be true and make the groups of less-than and
- greater-then elements into new partitions to sort again).
-
- As you marvel at the complexity of the code and wonder why it
- has to be so confusing. Consider some of the things this level
- of confusion brings:
-
- Once I do a compare, I squeeze every ounce of juice out of it. I
- never do compare calls I don't have to do, and I certainly never
- do redundant calls.
-
- I also never swap any elements unless I can prove there is a
- good reason. Many sort algorithms will swap a known value with
- an uncompared value just to get things in the right place (or
- avoid complexity :-), but that uncompared value, once it gets
- compared, may then have to be swapped again. A lot of the
- complexity of this code is due to the fact that it never swaps
- anything except compared values, and it only swaps them when the
- compare shows they are out of position.
- */
- int pc_left, pc_right;
- int u_right, u_left;
-
- int s;
-
- pc_left = ((part_left + part_right) / 2);
- pc_right = pc_left;
- u_right = pc_left - 1;
- u_left = pc_right + 1;
-
- /* Qsort works best when the pivot value is also the median value
- in the partition (unfortunately you can't find the median value
- without first sorting :-), so to give the algorithm a helping
- hand, we pick 3 elements and sort them and use the median value
- of that tiny set as the pivot value.
-
- Some versions of qsort like to use the left middle and right as
- the 3 elements to sort so they can insure the ends of the
- partition will contain values which will stop the scan in the
- compare loop, but when you have to call an arbitrarily complex
- routine to do a compare, its really better to just keep track of
- array index values to know when you hit the edge of the
- partition and avoid the extra compare. An even better reason to
- avoid using a compare call is the fact that you can drop off the
- edge of the array if someone foolishly provides you with an
- unstable compare function that doesn't always provide consistent
- results.
-
- So, since it is simpler for us to compare the three adjacent
- elements in the middle of the partition, those are the ones we
- pick here (conveniently pointed at by u_right, pc_left, and
- u_left). The values of the left, center, and right elements
- are refered to as l c and r in the following comments.
- */
-
-#ifdef QSORT_ORDER_GUESS
- swapped = 0;
-#endif
- s = qsort_cmp(u_right, pc_left);
- if (s < 0) {
- /* l < c */
- s = qsort_cmp(pc_left, u_left);
- /* if l < c, c < r - already in order - nothing to do */
- if (s == 0) {
- /* l < c, c == r - already in order, pc grows */
- ++pc_right;
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- } else if (s > 0) {
- /* l < c, c > r - need to know more */
- s = qsort_cmp(u_right, u_left);
- if (s < 0) {
- /* l < c, c > r, l < r - swap c & r to get ordered */
- qsort_swap(pc_left, u_left);
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- } else if (s == 0) {
- /* l < c, c > r, l == r - swap c&r, grow pc */
- qsort_swap(pc_left, u_left);
- --pc_left;
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- } else {
- /* l < c, c > r, l > r - make lcr into rlc to get ordered */
- qsort_rotate(pc_left, u_right, u_left);
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- }
- }
- } else if (s == 0) {
- /* l == c */
- s = qsort_cmp(pc_left, u_left);
- if (s < 0) {
- /* l == c, c < r - already in order, grow pc */
- --pc_left;
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- } else if (s == 0) {
- /* l == c, c == r - already in order, grow pc both ways */
- --pc_left;
- ++pc_right;
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- } else {
- /* l == c, c > r - swap l & r, grow pc */
- qsort_swap(u_right, u_left);
- ++pc_right;
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- }
- } else {
- /* l > c */
- s = qsort_cmp(pc_left, u_left);
- if (s < 0) {
- /* l > c, c < r - need to know more */
- s = qsort_cmp(u_right, u_left);
- if (s < 0) {
- /* l > c, c < r, l < r - swap l & c to get ordered */
- qsort_swap(u_right, pc_left);
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- } else if (s == 0) {
- /* l > c, c < r, l == r - swap l & c, grow pc */
- qsort_swap(u_right, pc_left);
- ++pc_right;
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- } else {
- /* l > c, c < r, l > r - rotate lcr into crl to order */
- qsort_rotate(u_right, pc_left, u_left);
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- }
- } else if (s == 0) {
- /* l > c, c == r - swap ends, grow pc */
- qsort_swap(u_right, u_left);
- --pc_left;
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- } else {
- /* l > c, c > r - swap ends to get in order */
- qsort_swap(u_right, u_left);
- qsort_all_asserts(pc_left, pc_right, u_left + 1, u_right - 1);
- }
- }
- /* We now know the 3 middle elements have been compared and
- arranged in the desired order, so we can shrink the uncompared
- sets on both sides
- */
- --u_right;
- ++u_left;
- qsort_all_asserts(pc_left, pc_right, u_left, u_right);
-
- /* The above massive nested if was the simple part :-). We now have
- the middle 3 elements ordered and we need to scan through the
- uncompared sets on either side, swapping elements that are on
- the wrong side or simply shuffling equal elements around to get
- all equal elements into the pivot chunk.
- */
-
- for ( ; ; ) {
- int still_work_on_left;
- int still_work_on_right;
-
- /* Scan the uncompared values on the left. If I find a value
- equal to the pivot value, move it over so it is adjacent to
- the pivot chunk and expand the pivot chunk. If I find a value
- less than the pivot value, then just leave it - its already
- on the correct side of the partition. If I find a greater
- value, then stop the scan.
- */
- while (still_work_on_left = (u_right >= part_left)) {
- s = qsort_cmp(u_right, pc_left);
- if (s < 0) {
- --u_right;
- } else if (s == 0) {
- --pc_left;
- if (pc_left != u_right) {
- qsort_swap(u_right, pc_left);
- }
- --u_right;
- } else {
- break;
- }
- qsort_assert(u_right < pc_left);
- qsort_assert(pc_left <= pc_right);
- qsort_assert(qsort_cmp(u_right + 1, pc_left) <= 0);
- qsort_assert(qsort_cmp(pc_left, pc_right) == 0);
- }
- /* Do a mirror image scan of uncompared values on the right
- */
- while (still_work_on_right = (u_left <= part_right)) {
- s = qsort_cmp(pc_right, u_left);
- if (s < 0) {
- ++u_left;
- } else if (s == 0) {
- ++pc_right;
- if (pc_right != u_left) {
- qsort_swap(pc_right, u_left);
- }
- ++u_left;
- } else {
- break;
- }
- qsort_assert(u_left > pc_right);
- qsort_assert(pc_left <= pc_right);
- qsort_assert(qsort_cmp(pc_right, u_left - 1) <= 0);
- qsort_assert(qsort_cmp(pc_left, pc_right) == 0);
- }
+ /* Copy all the strictly low elements */
- if (still_work_on_left) {
- /* I know I have a value on the left side which needs to be
- on the right side, but I need to know more to decide
- exactly the best thing to do with it.
- */
- if (still_work_on_right) {
- /* I know I have values on both side which are out of
- position. This is a big win because I kill two birds
- with one swap (so to speak). I can advance the
- uncompared pointers on both sides after swapping both
- of them into the right place.
- */
- qsort_swap(u_right, u_left);
- --u_right;
- ++u_left;
- qsort_all_asserts(pc_left, pc_right, u_left, u_right);
- } else {
- /* I have an out of position value on the left, but the
- right is fully scanned, so I "slide" the pivot chunk
- and any less-than values left one to make room for the
- greater value over on the right. If the out of position
- value is immediately adjacent to the pivot chunk (there
- are no less-than values), I can do that with a swap,
- otherwise, I have to rotate one of the less than values
- into the former position of the out of position value
- and the right end of the pivot chunk into the left end
- (got all that?).
- */
- --pc_left;
- if (pc_left == u_right) {
- qsort_swap(u_right, pc_right);
- qsort_all_asserts(pc_left, pc_right-1, u_left, u_right-1);
- } else {
- qsort_rotate(u_right, pc_left, pc_right);
- qsort_all_asserts(pc_left, pc_right-1, u_left, u_right-1);
- }
- --pc_right;
- --u_right;
- }
- } else if (still_work_on_right) {
- /* Mirror image of complex case above: I have an out of
- position value on the right, but the left is fully
- scanned, so I need to shuffle things around to make room
- for the right value on the left.
- */
- ++pc_right;
- if (pc_right == u_left) {
- qsort_swap(u_left, pc_left);
- qsort_all_asserts(pc_left+1, pc_right, u_left+1, u_right);
- } else {
- qsort_rotate(pc_right, pc_left, u_left);
- qsort_all_asserts(pc_left+1, pc_right, u_left+1, u_right);
- }
- ++pc_left;
- ++u_left;
- } else {
- /* No more scanning required on either side of partition,
- break out of loop and figure out next set of partitions
- */
- break;
- }
- }
-
- /* The elements in the pivot chunk are now in the right place. They
- will never move or be compared again. All I have to do is decide
- what to do with the stuff to the left and right of the pivot
- chunk.
-
- Notes on the QSORT_ORDER_GUESS ifdef code:
-
- 1. If I just built these partitions without swapping any (or
- very many) elements, there is a chance that the elements are
- already ordered properly (being properly ordered will
- certainly result in no swapping, but the converse can't be
- proved :-).
-
- 2. A (properly written) insertion sort will run faster on
- already ordered data than qsort will.
-
- 3. Perhaps there is some way to make a good guess about
- switching to an insertion sort earlier than partition size 6
- (for instance - we could save the partition size on the stack
- and increase the size each time we find we didn't swap, thus
- switching to insertion sort earlier for partitions with a
- history of not swapping).
-
- 4. Naturally, if I just switch right away, it will make
- artificial benchmarks with pure ascending (or descending)
- data look really good, but is that a good reason in general?
- Hard to say...
- */
-
-#ifdef QSORT_ORDER_GUESS
- if (swapped < 3) {
-#if QSORT_ORDER_GUESS == 1
- qsort_break_even = (part_right - part_left) + 1;
-#endif
-#if QSORT_ORDER_GUESS == 2
- qsort_break_even *= 2;
-#endif
-#if QSORT_ORDER_GUESS == 3
- int prev_break = qsort_break_even;
- qsort_break_even *= qsort_break_even;
- if (qsort_break_even < prev_break) {
- qsort_break_even = (part_right - part_left) + 1;
- }
-#endif
- } else {
- qsort_break_even = QSORT_BREAK_EVEN;
- }
-#endif
+ if (q == f1) {
+ FROMTOUPTO(f2, tp2, t);
+ *tp2++ = *f1++;
+ } else {
+ FROMTOUPTO(f1, tp2, t);
+ *tp2++ = *f2++;
+ }
+ }
- if (part_left < pc_left) {
- /* There are elements on the left which need more processing.
- Check the right as well before deciding what to do.
- */
- if (pc_right < part_right) {
- /* We have two partitions to be sorted. Stack the biggest one
- and process the smallest one on the next iteration. This
- minimizes the stack height by insuring that any additional
- stack entries must come from the smallest partition which
- (because it is smallest) will have the fewest
- opportunities to generate additional stack entries.
- */
- if ((part_right - pc_right) > (pc_left - part_left)) {
- /* stack the right partition, process the left */
- partition_stack[next_stack_entry].left = pc_right + 1;
- partition_stack[next_stack_entry].right = part_right;
-#ifdef QSORT_ORDER_GUESS
- partition_stack[next_stack_entry].qsort_break_even = qsort_break_even;
-#endif
- part_right = pc_left - 1;
- } else {
- /* stack the left partition, process the right */
- partition_stack[next_stack_entry].left = part_left;
- partition_stack[next_stack_entry].right = pc_left - 1;
-#ifdef QSORT_ORDER_GUESS
- partition_stack[next_stack_entry].qsort_break_even = qsort_break_even;
-#endif
- part_left = pc_right + 1;
- }
- qsort_assert(next_stack_entry < QSORT_MAX_STACK);
- ++next_stack_entry;
- } else {
- /* The elements on the left are the only remaining elements
- that need sorting, arrange for them to be processed as the
- next partition.
- */
- part_right = pc_left - 1;
- }
- } else if (pc_right < part_right) {
- /* There is only one chunk on the right to be sorted, make it
- the new partition and loop back around.
- */
- part_left = pc_right + 1;
- } else {
- /* This whole partition wound up in the pivot chunk, so
- we need to get a new partition off the stack.
- */
- if (next_stack_entry == 0) {
- /* the stack is empty - we are done */
- break;
- }
- --next_stack_entry;
- part_left = partition_stack[next_stack_entry].left;
- part_right = partition_stack[next_stack_entry].right;
-#ifdef QSORT_ORDER_GUESS
- qsort_break_even = partition_stack[next_stack_entry].qsort_break_even;
-#endif
- }
- } else {
- /* This partition is too small to fool with qsort complexity, just
- do an ordinary insertion sort to minimize overhead.
- */
- int i;
- /* Assume 1st element is in right place already, and start checking
- at 2nd element to see where it should be inserted.
- */
- for (i = part_left + 1; i <= part_right; ++i) {
- int j;
- /* Scan (backwards - just in case 'i' is already in right place)
- through the elements already sorted to see if the ith element
- belongs ahead of one of them.
- */
- for (j = i - 1; j >= part_left; --j) {
- if (qsort_cmp(i, j) >= 0) {
- /* i belongs right after j
- */
- break;
- }
- }
- ++j;
- if (j != i) {
- /* Looks like we really need to move some things
- */
- int k;
- temp = array[i];
- for (k = i - 1; k >= j; --k)
- array[k + 1] = array[k];
- array[j] = temp;
- }
- }
-
- /* That partition is now sorted, grab the next one, or get out
- of the loop if there aren't any more.
- */
-
- if (next_stack_entry == 0) {
- /* the stack is empty - we are done */
- break;
- }
- --next_stack_entry;
- part_left = partition_stack[next_stack_entry].left;
- part_right = partition_stack[next_stack_entry].right;
-#ifdef QSORT_ORDER_GUESS
- qsort_break_even = partition_stack[next_stack_entry].qsort_break_even;
-#endif
- }
- }
- /* Believe it or not, the array is sorted at this point! */
+ /* Run out remaining list */
+ if (f1 == l1) {
+ if (f2 < l2) FROMTOUPTO(f2, tp2, l2);
+ } else FROMTOUPTO(f1, tp2, l1);
+ p1 = NEXT(p1) = POTHER(tp2, list2, list1);
+ }
+ t = list1;
+ list1 = list2;
+ list2 = t;
+ last = PINDEX(list2, nmemb);
+ }
+ if (base == list2) {
+ last = PINDEX(list1, nmemb);
+ FROMTOUPTO(list1, list2, last);
+ }
+ Safefree(aux);
+ return;
}
static I32
sortcv(pTHXo_ SV *a, SV *b)
{
- dTHR;
I32 oldsaveix = PL_savestack_ix;
I32 oldscopeix = PL_scopestack_ix;
I32 result;
static I32
sortcv_stacked(pTHXo_ SV *a, SV *b)
{
- dTHR;
I32 oldsaveix = PL_savestack_ix;
I32 oldscopeix = PL_scopestack_ix;
I32 result;
}
if (filter_sub && len >= 0) {
- djSP;
+ dSP;
int count;
ENTER;