in the largest Chinese, Japanese, and Korean dictionaries are also
encoded. The standards will eventually cover almost all characters in
more than 250 writing systems and thousands of languages.
+Unicode 1.0 was released in October 1991, and 4.0 in April 2003.
A Unicode I<character> is an abstract entity. It is not bound to any
particular integer width, especially not to the C language C<char>.
I<code points>.
The Unicode standard prefers using hexadecimal notation for the code
-points. If numbers like C<0x0041> are unfamiliar to
-you, take a peek at a later section, L</"Hexadecimal Notation">.
-The Unicode standard uses the notation C<U+0041 LATIN CAPITAL LETTER A>,
-to give the hexadecimal code point and the normative name of
-the character.
+points. If numbers like C<0x0041> are unfamiliar to you, take a peek
+at a later section, L</"Hexadecimal Notation">. The Unicode standard
+uses the notation C<U+0041 LATIN CAPITAL LETTER A>, to give the
+hexadecimal code point and the normative name of the character.
Unicode also defines various I<properties> for the characters, like
"uppercase" or "lowercase", "decimal digit", or "punctuation";
A common myth about Unicode is that it would be "16-bit", that is,
Unicode is only represented as C<0x10000> (or 65536) characters from
-C<0x0000> to C<0xFFFF>. B<This is untrue.> Since Unicode 2.0, Unicode
-has been defined all the way up to 21 bits (C<0x10FFFF>), and since
-Unicode 3.1, characters have been defined beyond C<0xFFFF>. The first
-C<0x10000> characters are called the I<Plane 0>, or the I<Basic
-Multilingual Plane> (BMP). With Unicode 3.1, 17 planes in all are
-defined--but nowhere near full of defined characters, yet.
+C<0x0000> to C<0xFFFF>. B<This is untrue.> Since Unicode 2.0 (July
+1996), Unicode has been defined all the way up to 21 bits (C<0x10FFFF>),
+and since Unicode 3.1 (March 2001), characters have been defined
+beyond C<0xFFFF>. The first C<0x10000> characters are called the
+I<Plane 0>, or the I<Basic Multilingual Plane> (BMP). With Unicode
+3.1, 17 (yes, seventeen) planes in all were defined--but they are
+nowhere near full of defined characters, yet.
Another myth is that the 256-character blocks have something to
do with languages--that each block would define the characters used
For further information see L<Unicode::UCD>.
The Unicode code points are just abstract numbers. To input and
-output these abstract numbers, the numbers must be I<encoded> somehow.
-Unicode defines several I<character encoding forms>, of which I<UTF-8>
-is perhaps the most popular. UTF-8 is a variable length encoding that
-encodes Unicode characters as 1 to 6 bytes (only 4 with the currently
-defined characters). Other encodings include UTF-16 and UTF-32 and their
-big- and little-endian variants (UTF-8 is byte-order independent)
-The ISO/IEC 10646 defines the UCS-2 and UCS-4 encoding forms.
+output these abstract numbers, the numbers must be I<encoded> or
+I<serialised> somehow. Unicode defines several I<character encoding
+forms>, of which I<UTF-8> is perhaps the most popular. UTF-8 is a
+variable length encoding that encodes Unicode characters as 1 to 6
+bytes (only 4 with the currently defined characters). Other encodings
+include UTF-16 and UTF-32 and their big- and little-endian variants
+(UTF-8 is byte-order independent) The ISO/IEC 10646 defines the UCS-2
+and UCS-4 encoding forms.
For more information about encodings--for instance, to learn what
I<surrogates> and I<byte order marks> (BOMs) are--see L<perlunicode>.
For example,
- perl -e 'print "\x{DF}\n", "\x{0100}\x{DF}\n"'
+ perl -e 'print "\x{DF}\n", "\x{0100}\x{DF}\n"'
produces a fairly useless mixture of native bytes and UTF-8, as well
as a warning:
Wide character in print at ...
-To output UTF-8, use the C<:utf8> output layer. Prepending
+To output UTF-8, use the C<:encoding> or C<:utf8> output layer. Prepending
binmode(STDOUT, ":utf8");
to this sample program ensures that the output is completely UTF-8,
and removes the program's warning.
-If your locale environment variables (C<LANGUAGE>, C<LC_ALL>,
-C<LC_CTYPE>, C<LANG>) contain the strings 'UTF-8' or 'UTF8',
-regardless of case, then the default encoding of your STDIN, STDOUT,
-and STDERR and of B<any subsequent file open>, is UTF-8. Note that
-this means that Perl expects other software to work, too: if Perl has
-been led to believe that STDIN should be UTF-8, but then STDIN coming
-in from another command is not UTF-8, Perl will complain about the
-malformed UTF-8.
+You can enable automatic UTF-8-ification of your standard file
+handles, default C<open()> layer, and C<@ARGV> by using either
+the C<-C> command line switch or the C<PERL_UNICODE> environment
+variable, see L<perlrun> for the documentation of the C<-C> switch.
+
+Note that this means that Perl expects other software to work, too:
+if Perl has been led to believe that STDIN should be UTF-8, but then
+STDIN coming in from another command is not UTF-8, Perl will complain
+about the malformed UTF-8.
All features that combine Unicode and I/O also require using the new
PerlIO feature. Almost all Perl 5.8 platforms do use PerlIO, though:
constants: you cannot use variables in them. if you want similar
run-time functionality, use C<chr()> and C<charnames::vianame()>.
-Also note that if all the code points for pack "U" are below 0x100,
-bytes will be generated, just like if you were using C<chr()>.
-
- my $bytes = pack("U*", 0x80, 0xFF);
-
If you want to force the result to Unicode characters, use the special
-C<"U0"> prefix. It consumes no arguments but forces the result to be
-in Unicode characters, instead of bytes.
+C<"U0"> prefix. It consumes no arguments but causes the following bytes
+to be interpreted as the UTF-8 encoding of Unicode characters:
+
+ my $chars = pack("U0W*", 0x80, 0x42);
- my $chars = pack("U0U*", 0x80, 0xFF);
+Likewise, you can stop such UTF-8 interpretation by using the special
+C<"C0"> prefix.
=head2 Handling Unicode
will work on the Unicode characters (see L<perlunicode> and L<perlretut>).
Note that Perl considers combining character sequences to be
-characters, so for example
+separate characters, so for example
use charnames ':full';
print length("\N{LATIN CAPITAL LETTER A}\N{COMBINING ACUTE ACCENT}"), "\n";
When you combine legacy data and Unicode the legacy data needs
to be upgraded to Unicode. Normally ISO 8859-1 (or EBCDIC, if
-applicable) is assumed. You can override this assumption by
-using the C<encoding> pragma, for example
-
- use encoding 'latin2'; # ISO 8859-2
-
-in which case literals (string or regular expressions), C<chr()>,
-and C<ord()> in your whole script are assumed to produce Unicode
-characters from ISO 8859-2 code points. Note that the matching for
-encoding names is forgiving: instead of C<latin2> you could have
-said C<Latin 2>, or C<iso8859-2>, or other variations. With just
-
- use encoding;
-
-the environment variable C<PERL_ENCODING> will be consulted.
-If that variable isn't set, the encoding pragma will fail.
+applicable) is assumed.
The C<Encode> module knows about many encodings and has interfaces
for doing conversions between those encodings:
- use Encode 'from_to';
- from_to($data, "iso-8859-3", "utf-8"); # from legacy to utf-8
+ use Encode 'decode';
+ $data = decode("iso-8859-3", $data); # convert from legacy to utf-8
=head2 Unicode I/O
The matching of encoding names is loose: case does not matter, and
many encodings have several aliases. Note that the C<:utf8> layer
must always be specified exactly like that; it is I<not> subject to
-the loose matching of encoding names.
+the loose matching of encoding names. Also note that C<:utf8> is unsafe for
+input, because it accepts the data without validating that it is indeed valid
+UTF8.
See L<PerlIO> for the C<:utf8> layer, L<PerlIO::encoding> and
L<Encode::PerlIO> for the C<:encoding()> layer, and
Unicode in Perl's eyes. To do that, specify the appropriate
layer when opening files
- open(my $fh,'<:utf8', 'anything');
+ open(my $fh,'<:encoding(utf8)', 'anything');
my $line_of_unicode = <$fh>;
open(my $fh,'<:encoding(Big5)', 'anything');
The I/O layers can also be specified more flexibly with
the C<open> pragma. See L<open>, or look at the following example.
- use open ':utf8'; # input and output default layer will be UTF-8
+ use open ':encoding(utf8)'; # input/output default encoding will be UTF-8
open X, ">file";
print X chr(0x100), "\n";
close X;
With the C<open> pragma you can use the C<:locale> layer
- $ENV{LC_ALL} = $ENV{LANG} = 'ru_RU.KOI8-R';
+ BEGIN { $ENV{LC_ALL} = $ENV{LANG} = 'ru_RU.KOI8-R' }
# the :locale will probe the locale environment variables like LC_ALL
use open OUT => ':locale'; # russki parusski
open(O, ">koi8");
printf "%#x\n", ord(<I>), "\n"; # this should print 0xc1
close I;
-or you can also use the C<':encoding(...)'> layer
-
- open(my $epic,'<:encoding(iso-8859-7)','iliad.greek');
- my $line_of_unicode = <$epic>;
-
These methods install a transparent filter on the I/O stream that
converts data from the specified encoding when it is read in from the
stream. The result is always Unicode.
open(my $nihongo, '<:encoding(iso-2022-jp)', 'text.jis');
open(my $unicode, '>:utf8', 'text.utf8');
- select $unicode;
- while (<$nihongo>) { print }
+ while (<$nihongo>) { print $unicode $_ }
The naming of encodings, both by the C<open()> and by the C<open>
-pragma, is similar to the C<encoding> pragma in that it allows for
-flexible names: C<koi8-r> and C<KOI8R> will both be understood.
+pragma allows for flexible names: C<koi8-r> and C<KOI8R> will both be
+understood.
Common encodings recognized by ISO, MIME, IANA, and various other
standardisation organisations are recognised; for a more detailed
local $/; ## read in the whole file of 8-bit characters
$t = <F>;
close F;
- open F, ">:utf8", "file";
+ open F, ">:encoding(utf8)", "file";
print F $t; ## convert to UTF-8 on output
close F;
If you run this code twice, the contents of the F<file> will be twice
-UTF-8 encoded. A C<use open ':utf8'> would have avoided the bug, or
-explicitly opening also the F<file> for input as UTF-8.
+UTF-8 encoded. A C<use open ':encoding(utf8)'> would have avoided the
+bug, or explicitly opening also the F<file> for input as UTF-8.
B<NOTE>: the C<:utf8> and C<:encoding> features work only if your
-Perl has been built with the new PerlIO feature.
+Perl has been built with the new PerlIO feature (which is the default
+on most systems).
=head2 Displaying Unicode As Text
sprintf("\\x{%04X}", $_) : # \x{...}
chr($_) =~ /[[:cntrl:]]/ ? # else if control character ...
sprintf("\\x%02X", $_) : # \x..
- chr($_) # else as themselves
- } unpack("U*", $_[0])); # unpack Unicode characters
+ quotemeta(chr($_)) # else quoted or as themselves
+ } unpack("W*", $_[0])); # unpack Unicode characters
}
For example,
nice_string("foo\x{100}bar\n")
-returns:
+returns the string
+
+ 'foo\x{0100}bar\x0A'
- "foo\x{0100}bar\x0A"
+which is ready to be printed.
=head2 Special Cases
ways of looking behind the scenes.
One way of peeking inside the internal encoding of Unicode characters
-is to use C<unpack("C*", ...> to get the bytes or C<unpack("H*", ...)>
-to display the bytes:
+is to use C<unpack("C*", ...> to get the bytes of whatever the string
+encoding happens to be, or C<unpack("U0..", ...)> to get the bytes of the
+UTF-8 encoding:
# this prints c4 80 for the UTF-8 bytes 0xc4 0x80
- print join(" ", unpack("H*", pack("U", 0x100))), "\n";
+ print join(" ", unpack("U0(H2)*", pack("U", 0x100))), "\n";
Yet another way would be to use the Devel::Peek module:
perl -MDevel::Peek -e 'Dump(chr(0x100))'
-That shows the UTF8 flag in FLAGS and both the UTF-8 bytes
+That shows the C<UTF8> flag in FLAGS and both the UTF-8 bytes
and Unicode characters in C<PV>. See also later in this document
-the discussion about the C<is_utf8> function of the C<Encode> module.
+the discussion about the C<utf8::is_utf8()> function.
=back
The long answer is that you need to consider character normalization
and casing issues: see L<Unicode::Normalize>, Unicode Technical
Reports #15 and #21, I<Unicode Normalization Forms> and I<Case
-Mappings>, http://www.unicode.org/unicode/reports/tr15/ and
-http://www.unicode.org/unicode/reports/tr21/
+Mappings>, http://www.unicode.org/unicode/reports/tr15/ and
+http://www.unicode.org/unicode/reports/tr21/
As of Perl 5.8.0, the "Full" case-folding of I<Case
Mappings/SpecialCasing> is implemented.
Okay, if you insist:
- use Encode 'is_utf8';
- print is_utf8($string) ? 1 : 0, "\n";
+ print utf8::is_utf8($string) ? 1 : 0, "\n";
But note that this doesn't mean that any of the characters in the
string are necessary UTF-8 encoded, or that any of the characters have
as a single byte encoding. If the flag is on, the bytes in the scalar
are interpreted as the (multi-byte, variable-length) UTF-8 encoded code
points of the characters. Bytes added to an UTF-8 encoded string are
-automatically upgraded to UTF-8. If mixed non-UTF8 and UTF-8 scalars
+automatically upgraded to UTF-8. If mixed non-UTF-8 and UTF-8 scalars
are merged (double-quoted interpolation, explicit concatenation, and
printf/sprintf parameter substitution), the result will be UTF-8 encoded
as if copies of the byte strings were upgraded to UTF-8: for example,
$b = "\x{100}";
print "$a = $b\n";
-the output string will be UTF-8-encoded C<ab\x80c\x{100}\n>, but note
-that C<$a> will stay byte-encoded.
+the output string will be UTF-8-encoded C<ab\x80c = \x{100}\n>, but
+C<$a> will stay byte-encoded.
Sometimes you might really need to know the byte length of a string
instead of the character length. For that use either the
Use the C<Encode> package to try converting it.
For example,
- use Encode 'encode_utf8';
- if (encode_utf8($string_of_bytes_that_I_think_is_utf8)) {
- # valid
+ use Encode 'decode_utf8';
+ eval { decode_utf8($string, Encode::FB_CROAK) };
+ if ($@) {
+ # $string is valid utf8
} else {
- # invalid
+ # $string is not valid utf8
}
-For UTF-8 only, you can use:
+Or use C<unpack> to try decoding it:
use warnings;
- @chars = unpack("U0U*", $string_of_bytes_that_I_think_is_utf8);
+ @chars = unpack("C0U*", $string_of_bytes_that_I_think_is_utf8);
-If invalid, a C<Malformed UTF-8 character (byte 0x##) in unpack>
-warning is produced. The "U0" means "expect strictly UTF-8 encoded
-Unicode". Without that the C<unpack("U*", ...)> would accept also
-data like C<chr(0xFF>), similarly to the C<pack> as we saw earlier.
+If invalid, a C<Malformed UTF-8 character> warning is produced. The "C0" means
+"process the string character per character". Without that, the
+C<unpack("U*", ...)> would work in C<U0> mode (the default if the format
+string starts with C<U>) and it would return the bytes making up the UTF-8
+encoding of the target string, something that will always work.
=item *
native 8-bit encoding (e.g. Latin-1, EBCDIC, etc.), you can use
pack/unpack to convert to/from Unicode.
- $native_string = pack("C*", unpack("U*", $Unicode_string));
- $Unicode_string = pack("U*", unpack("C*", $native_string));
+ $native_string = pack("W*", unpack("U*", $Unicode_string));
+ $Unicode_string = pack("U*", unpack("W*", $native_string));
If you have a sequence of bytes you B<know> is valid UTF-8,
but Perl doesn't know it yet, you can make Perl a believer, too:
use Encode 'decode_utf8';
$Unicode = decode_utf8($bytes);
+or:
+
+ $Unicode = pack("U0a*", $bytes);
+
You can convert well-formed UTF-8 to a sequence of bytes, but if
you just want to convert random binary data into UTF-8, you can't.
B<Any random collection of bytes isn't well-formed UTF-8>. You can
How Does Unicode Work With Traditional Locales?
In Perl, not very well. Avoid using locales through the C<locale>
-pragma. Use only one or the other.
+pragma. Use only one or the other. But see L<perlrun> for the
+description of the C<-C> switch and its environment counterpart,
+C<$ENV{PERL_UNICODE}> to see how to enable various Unicode features,
+for example by using locale settings.
=back
Unicode Consortium
- http://www.unicode.org/
+http://www.unicode.org/
=item *
Unicode FAQ
- http://www.unicode.org/unicode/faq/
+http://www.unicode.org/unicode/faq/
=item *
Unicode Glossary
- http://www.unicode.org/glossary/
+http://www.unicode.org/glossary/
=item *
Unicode Useful Resources
- http://www.unicode.org/unicode/onlinedat/resources.html
+http://www.unicode.org/unicode/onlinedat/resources.html
=item *
Unicode and Multilingual Support in HTML, Fonts, Web Browsers and Other Applications
- http://www.alanwood.net/unicode/
+http://www.alanwood.net/unicode/
=item *
UTF-8 and Unicode FAQ for Unix/Linux
- http://www.cl.cam.ac.uk/~mgk25/unicode.html
+http://www.cl.cam.ac.uk/~mgk25/unicode.html
=item *
Legacy Character Sets
- http://www.czyborra.com/
- http://www.eki.ee/letter/
+http://www.czyborra.com/
+http://www.eki.ee/letter/
=item *
$Config{installprivlib}/unicore
-in Perl 5.8.0 or newer, and
+in Perl 5.8.0 or newer, and
$Config{installprivlib}/unicode
=head1 SEE ALSO
-L<perlunicode>, L<Encode>, L<encoding>, L<open>, L<utf8>, L<bytes>,
-L<perlretut>, L<Unicode::Collate>, L<Unicode::Normalize>, L<Unicode::UCD>
+L<perlunitut>, L<perlunicode>, L<Encode>, L<open>, L<utf8>, L<bytes>,
+L<perlretut>, L<perlrun>, L<Unicode::Collate>, L<Unicode::Normalize>,
+L<Unicode::UCD>
=head1 ACKNOWLEDGMENTS
=head1 AUTHOR, COPYRIGHT, AND LICENSE
-Copyright 2001-2002 Jarkko Hietaniemi <jhi@iki.fi>
+Copyright 2001-2002 Jarkko Hietaniemi E<lt>jhi@iki.fiE<gt>
This document may be distributed under the same terms as Perl itself.