A Unicode I<character> is an abstract entity. It is not bound to any
particular integer width, especially not to the C language C<char>.
Unicode is language-neutral and display-neutral: it does not encode the
-language of the text and it does not define fonts or other graphical
+language of the text, and it does not generally define fonts or other graphical
layout details. Unicode operates on characters and on text built from
those characters.
Furthermore, various operations on the characters like uppercasing,
lowercasing, and collating (sorting) are defined.
-A Unicode character consists either of a single code point, or a
-I<base character> (like C<LATIN CAPITAL LETTER A>), followed by one or
-more I<modifiers> (like C<COMBINING ACUTE ACCENT>). This sequence of
+A Unicode I<logical> "character" can actually consist of more than one internal
+I<actual> "character" or code point. For Western languages, this is adequately
+modelled by a I<base character> (like C<LATIN CAPITAL LETTER A>) followed
+by one or more I<modifiers> (like C<COMBINING ACUTE ACCENT>). This sequence of
base character and modifiers is called a I<combining character
-sequence>.
-
-Whether to call these combining character sequences "characters"
-depends on your point of view. If you are a programmer, you probably
-would tend towards seeing each element in the sequences as one unit,
-or "character". The whole sequence could be seen as one "character",
-however, from the user's point of view, since that's probably what it
-looks like in the context of the user's language.
+sequence>. Some non-western languages require more complicated
+models, so Unicode created the I<grapheme cluster> concept, and then the
+I<extended grapheme cluster>. For example, a Korean Hangul syllable is
+considered a single logical character, but most often consists of three actual
+Unicode characters: a leading consonant followed by an interior vowel followed
+by a trailing consonant.
+
+Whether to call these extended grapheme clusters "characters" depends on your
+point of view. If you are a programmer, you probably would tend towards seeing
+each element in the sequences as one unit, or "character". The whole sequence
+could be seen as one "character", however, from the user's point of view, since
+that's probably what it looks like in the context of the user's language.
With this "whole sequence" view of characters, the total number of
characters is open-ended. But in the programmer's "one unit is one
character" point of view, the concept of "characters" is more
-deterministic. In this document, we take that second point of view:
-one "character" is one Unicode code point, be it a base character or
-a combining character.
+deterministic. In this document, we take that second point of view:
+one "character" is one Unicode code point.
For some combinations, there are I<precomposed> characters.
C<LATIN CAPITAL LETTER A WITH ACUTE>, for example, is defined as
otherwise used blocks. Secondly, there are special Unicode control
characters that do not represent true characters.
-A common myth about Unicode is that it would be "16-bit", that is,
+A common myth about Unicode is that it is "16-bit", that is,
Unicode is only represented as C<0x10000> (or 65536) characters from
C<0x0000> to C<0xFFFF>. B<This is untrue.> Since Unicode 2.0 (July
1996), Unicode has been defined all the way up to 21 bits (C<0x10FFFF>),
3.1, 17 (yes, seventeen) planes in all were defined--but they are
nowhere near full of defined characters, yet.
-Another myth is that the 256-character blocks have something to
+Another myth is about Unicode blocks--that they have something to
do with languages--that each block would define the characters used
by a language or a set of languages. B<This is also untrue.>
The division into blocks exists, but it is almost completely
accidental--an artifact of how the characters have been and
-still are allocated. Instead, there is a concept called I<scripts>,
-which is more useful: there is C<Latin> script, C<Greek> script, and
-so on. Scripts usually span varied parts of several blocks.
-For further information see L<Unicode::UCD>.
+still are allocated. Instead, there is a concept called I<scripts>, which is
+more useful: there is C<Latin> script, C<Greek> script, and so on. Scripts
+usually span varied parts of several blocks. For more information about
+scripts, see L<perlunicode/Scripts>.
The Unicode code points are just abstract numbers. To input and
output these abstract numbers, the numbers must be I<encoded> or
I<serialised> somehow. Unicode defines several I<character encoding
forms>, of which I<UTF-8> is perhaps the most popular. UTF-8 is a
variable length encoding that encodes Unicode characters as 1 to 6
-bytes (only 4 with the currently defined characters). Other encodings
+bytes. Other encodings
include UTF-16 and UTF-32 and their big- and little-endian variants
(UTF-8 is byte-order independent) The ISO/IEC 10646 defines the UCS-2
and UCS-4 encoding forms.
problems of the initial Unicode implementation, but for example
regular expressions still do not work with Unicode in 5.6.1.
-B<Starting from Perl 5.8.0, the use of C<use utf8> is no longer
-necessary.> In earlier releases the C<utf8> pragma was used to declare
+B<Starting from Perl 5.8.0, the use of C<use utf8> is needed only in much more restricted circumstances.> In earlier releases the C<utf8> pragma was used to declare
that operations in the current block or file would be Unicode-aware.
This model was found to be wrong, or at least clumsy: the "Unicodeness"
is now carried with the data, instead of being attached to the
Perl supports both pre-5.6 strings of eight-bit native bytes, and
strings of Unicode characters. The principle is that Perl tries to
keep its data as eight-bit bytes for as long as possible, but as soon
-as Unicodeness cannot be avoided, the data is transparently upgraded
-to Unicode.
+as Unicodeness cannot be avoided, the data is (mostly) transparently upgraded
+to Unicode. There are some problems--see L<perlunicode/The "Unicode Bug">.
Internally, Perl currently uses either whatever the native eight-bit
character set of the platform (for example Latin-1) is, defaulting to
A user of Perl does not normally need to know nor care how Perl
happens to encode its internal strings, but it becomes relevant when
-outputting Unicode strings to a stream without a PerlIO layer -- one with
-the "default" encoding. In such a case, the raw bytes used internally
+outputting Unicode strings to a stream without a PerlIO layer (one with
+the "default" encoding). In such a case, the raw bytes used internally
(the native character set or UTF-8, as appropriate for each string)
will be used, and a "Wide character" warning will be issued if those
strings contain a character beyond 0x00FF.
For example,
- perl -e 'print "\x{DF}\n", "\x{0100}\x{DF}\n"'
+ perl -e 'print "\x{DF}\n", "\x{0100}\x{DF}\n"'
produces a fairly useless mixture of native bytes and UTF-8, as well
as a warning:
Wide character in print at ...
-To output UTF-8, use the C<:utf8> output layer. Prepending
+To output UTF-8, use the C<:encoding> or C<:utf8> output layer. Prepending
binmode(STDOUT, ":utf8");
Perl 5.8.0 also supports Unicode on EBCDIC platforms. There,
Unicode support is somewhat more complex to implement since
-additional conversions are needed at every step. Some problems
-remain, see L<perlebcdic> for details.
+additional conversions are needed at every step.
+
+Later Perl releases have added code that will not work on EBCDIC platforms, and
+no one has complained, so the divergence has continued. If you want to run
+Perl on an EBCDIC platform, send email to perlbug@perl.org
-In any case, the Unicode support on EBCDIC platforms is better than
-in the 5.6 series, which didn't work much at all for EBCDIC platform.
On EBCDIC platforms, the internal Unicode encoding form is UTF-EBCDIC
instead of UTF-8. The difference is that as UTF-8 is "ASCII-safe" in
that ASCII characters encode to UTF-8 as-is, while UTF-EBCDIC is
my $chars = pack("U0W*", 0x80, 0x42);
-Likewise, you can stop such UTF-8 interpretation by using the special
+Likewise, you can stop such UTF-8 interpretation by using the special
C<"C0"> prefix.
=head2 Handling Unicode
C<substr()> will work on the Unicode characters; regular expressions
will work on the Unicode characters (see L<perlunicode> and L<perlretut>).
-Note that Perl considers combining character sequences to be
-separate characters, so for example
+Note that Perl considers grapheme clusters to be separate characters, so for
+example
use charnames ':full';
print length("\N{LATIN CAPITAL LETTER A}\N{COMBINING ACUTE ACCENT}"), "\n";
will print 2, not 1. The only exception is that regular expressions
-have C<\X> for matching a combining character sequence.
+have C<\X> for matching an extended grapheme cluster.
Life is not quite so transparent, however, when working with legacy
encodings, I/O, and certain special cases:
When you combine legacy data and Unicode the legacy data needs
to be upgraded to Unicode. Normally ISO 8859-1 (or EBCDIC, if
-applicable) is assumed. You can override this assumption by
-using the C<encoding> pragma, for example
-
- use encoding 'latin2'; # ISO 8859-2
-
-in which case literals (string or regular expressions), C<chr()>,
-and C<ord()> in your whole script are assumed to produce Unicode
-characters from ISO 8859-2 code points. Note that the matching for
-encoding names is forgiving: instead of C<latin2> you could have
-said C<Latin 2>, or C<iso8859-2>, or other variations. With just
-
- use encoding;
-
-the environment variable C<PERL_ENCODING> will be consulted.
-If that variable isn't set, the encoding pragma will fail.
+applicable) is assumed.
The C<Encode> module knows about many encodings and has interfaces
for doing conversions between those encodings:
The matching of encoding names is loose: case does not matter, and
many encodings have several aliases. Note that the C<:utf8> layer
must always be specified exactly like that; it is I<not> subject to
-the loose matching of encoding names.
+the loose matching of encoding names. Also note that C<:utf8> is unsafe for
+input, because it accepts the data without validating that it is indeed valid
+UTF8.
See L<PerlIO> for the C<:utf8> layer, L<PerlIO::encoding> and
L<Encode::PerlIO> for the C<:encoding()> layer, and
Unicode in Perl's eyes. To do that, specify the appropriate
layer when opening files
- open(my $fh,'<:utf8', 'anything');
+ open(my $fh,'<:encoding(utf8)', 'anything');
my $line_of_unicode = <$fh>;
open(my $fh,'<:encoding(Big5)', 'anything');
The I/O layers can also be specified more flexibly with
the C<open> pragma. See L<open>, or look at the following example.
- use open ':utf8'; # input and output default layer will be UTF-8
+ use open ':encoding(utf8)'; # input/output default encoding will be
+ # UTF-8
open X, ">file";
print X chr(0x100), "\n";
close X;
With the C<open> pragma you can use the C<:locale> layer
BEGIN { $ENV{LC_ALL} = $ENV{LANG} = 'ru_RU.KOI8-R' }
- # the :locale will probe the locale environment variables like LC_ALL
+ # the :locale will probe the locale environment variables like
+ # LC_ALL
use open OUT => ':locale'; # russki parusski
open(O, ">koi8");
print O chr(0x430); # Unicode CYRILLIC SMALL LETTER A = KOI8-R 0xc1
printf "%#x\n", ord(<I>), "\n"; # this should print 0xc1
close I;
-or you can also use the C<':encoding(...)'> layer
-
- open(my $epic,'<:encoding(iso-8859-7)','iliad.greek');
- my $line_of_unicode = <$epic>;
-
These methods install a transparent filter on the I/O stream that
converts data from the specified encoding when it is read in from the
stream. The result is always Unicode.
while (<$nihongo>) { print $unicode $_ }
The naming of encodings, both by the C<open()> and by the C<open>
-pragma, is similar to the C<encoding> pragma in that it allows for
-flexible names: C<koi8-r> and C<KOI8R> will both be understood.
+pragma allows for flexible names: C<koi8-r> and C<KOI8R> will both be
+understood.
Common encodings recognized by ISO, MIME, IANA, and various other
standardisation organisations are recognised; for a more detailed
local $/; ## read in the whole file of 8-bit characters
$t = <F>;
close F;
- open F, ">:utf8", "file";
+ open F, ">:encoding(utf8)", "file";
print F $t; ## convert to UTF-8 on output
close F;
If you run this code twice, the contents of the F<file> will be twice
-UTF-8 encoded. A C<use open ':utf8'> would have avoided the bug, or
-explicitly opening also the F<file> for input as UTF-8.
+UTF-8 encoded. A C<use open ':encoding(utf8)'> would have avoided the
+bug, or explicitly opening also the F<file> for input as UTF-8.
B<NOTE>: the C<:utf8> and C<:encoding> features work only if your
Perl has been built with the new PerlIO feature (which is the default
255 are displayed as C<\x{...}>, control characters (like C<\n>) are
displayed as C<\x..>, and the rest of the characters as themselves:
- sub nice_string {
- join("",
- map { $_ > 255 ? # if wide character...
- sprintf("\\x{%04X}", $_) : # \x{...}
- chr($_) =~ /[[:cntrl:]]/ ? # else if control character ...
- sprintf("\\x%02X", $_) : # \x..
- quotemeta(chr($_)) # else quoted or as themselves
+ sub nice_string {
+ join("",
+ map { $_ > 255 ? # if wide character...
+ sprintf("\\x{%04X}", $_) : # \x{...}
+ chr($_) =~ /[[:cntrl:]]/ ? # else if control character ...
+ sprintf("\\x%02X", $_) : # \x..
+ quotemeta(chr($_)) # else quoted or as themselves
} unpack("W*", $_[0])); # unpack Unicode characters
}
CAPITAL LETTER As should be considered equal, or even As of any case.
The long answer is that you need to consider character normalization
-and casing issues: see L<Unicode::Normalize>, Unicode Technical
-Reports #15 and #21, I<Unicode Normalization Forms> and I<Case
-Mappings>, http://www.unicode.org/unicode/reports/tr15/ and
-http://www.unicode.org/unicode/reports/tr21/
+and casing issues: see L<Unicode::Normalize>, Unicode Technical Report #15,
+L<Unicode Normalization Forms|http://www.unicode.org/unicode/reports/tr15> and
+sections on case mapping in the L<Unicode Standard|http://www.unicode.org>.
As of Perl 5.8.0, the "Full" case-folding of I<Case
-Mappings/SpecialCasing> is implemented.
+Mappings/SpecialCasing> is implemented, but bugs remain in C<qr//i> with them.
=item *
The long answer is that "it depends", and a good answer cannot be
given without knowing (at the very least) the language context.
See L<Unicode::Collate>, and I<Unicode Collation Algorithm>
-http://www.unicode.org/unicode/reports/tr10/
+L<http://www.unicode.org/unicode/reports/tr10/>
=back
Character Ranges and Classes
-Character ranges in regular expression character classes (C</[a-z]/>)
-and in the C<tr///> (also known as C<y///>) operator are not magically
-Unicode-aware. What this means that C<[A-Za-z]> will not magically start
-to mean "all alphabetic letters"; not that it does mean that even for
-8-bit characters, you should be using C</[[:alpha:]]/> in that case.
+Character ranges in regular expression bracketed character classes ( e.g.,
+C</[a-z]/>) and in the C<tr///> (also known as C<y///>) operator are not
+magically Unicode-aware. What this means is that C<[A-Za-z]> will not
+magically start to mean "all alphabetic letters" (not that it does mean that
+even for 8-bit characters; for those, if you are using locales (L<perllocale>),
+use C</[[:alpha:]]/>; and if not, use the 8-bit-aware property C<\p{alpha}>).
+
+All the properties that begin with C<\p> (and its inverse C<\P>) are actually
+character classes that are Unicode-aware. There are dozens of them, see
+L<perluniprops>.
-For specifying character classes like that in regular expressions,
-you can use the various Unicode properties--C<\pL>, or perhaps
-C<\p{Alphabetic}>, in this particular case. You can use Unicode
-code points as the end points of character ranges, but there is no
-magic associated with specifying a certain range. For further
-information--there are dozens of Unicode character classes--see
-L<perlunicode>.
+You can use Unicode code points as the end points of character ranges, and the
+range will include all Unicode code points that lie between those end points.
=item *
How Do I Know Whether My String Is In Unicode?
-You shouldn't care. No, you really shouldn't. No, really. If you
-have to care--beyond the cases described above--it means that we
-didn't get the transparency of Unicode quite right.
+You shouldn't have to care. But you may, because currently the semantics of the
+characters whose ordinals are in the range 128 to 255 are different depending on
+whether the string they are contained within is in Unicode or not.
+(See L<perlunicode/When Unicode Does Not Happen>.)
-Okay, if you insist:
+To determine if a string is in Unicode, use:
print utf8::is_utf8($string) ? 1 : 0, "\n";
return the value of the internal "utf8ness" flag attached to the
C<$string>. If the flag is off, the bytes in the scalar are interpreted
as a single byte encoding. If the flag is on, the bytes in the scalar
-are interpreted as the (multi-byte, variable-length) UTF-8 encoded code
-points of the characters. Bytes added to an UTF-8 encoded string are
+are interpreted as the (variable-length, potentially multi-byte) UTF-8 encoded
+code points of the characters. Bytes added to a UTF-8 encoded string are
automatically upgraded to UTF-8. If mixed non-UTF-8 and UTF-8 scalars
are merged (double-quoted interpolation, explicit concatenation, and
printf/sprintf parameter substitution), the result will be UTF-8 encoded
Sometimes you might really need to know the byte length of a string
instead of the character length. For that use either the
-C<Encode::encode_utf8()> function or the C<bytes> pragma and its only
-defined function C<length()>:
+C<Encode::encode_utf8()> function or the C<bytes> pragma and
+the C<length()> function:
my $unicode = chr(0x100);
print length($unicode), "\n"; # will print 1
use bytes;
print length($unicode), "\n"; # will also print 2
# (the 0xC4 0x80 of the UTF-8)
+ no bytes;
=item *
For example,
use Encode 'decode_utf8';
- if (decode_utf8($string_of_bytes_that_I_think_is_utf8)) {
- # valid
+
+ if (eval { decode_utf8($string, Encode::FB_CROAK); 1 }) {
+ # $string is valid utf8
} else {
- # invalid
+ # $string is not valid utf8
}
Or use C<unpack> to try decoding it:
use warnings;
@chars = unpack("C0U*", $string_of_bytes_that_I_think_is_utf8);
-If invalid, a C<Malformed UTF-8 character (byte 0x##) in unpack>
-warning is produced. The "C0" means
-"process the string character per character". Without that the
-C<unpack("U*", ...)> would work in C<U0> mode (the default if the format
-string starts with C<U>) and it would return the bytes making up the UTF-8
+If invalid, a C<Malformed UTF-8 character> warning is produced. The "C0" means
+"process the string character per character". Without that, the
+C<unpack("U*", ...)> would work in C<U0> mode (the default if the format
+string starts with C<U>) and it would return the bytes making up the UTF-8
encoding of the target string, something that will always work.
=item *
or:
$Unicode = pack("U0a*", $bytes);
-
-You can convert well-formed UTF-8 to a sequence of bytes, but if
-you just want to convert random binary data into UTF-8, you can't.
-B<Any random collection of bytes isn't well-formed UTF-8>. You can
-use C<unpack("C*", $string)> for the former, and you can create
-well-formed Unicode data by C<pack("U*", 0xff, ...)>.
+
+You can find the bytes that make up a UTF-8 sequence with
+
+ @bytes = unpack("C*", $Unicode_string)
+
+and you can create well-formed Unicode with
+
+ $Unicode_string = pack("U*", 0xff, ...)
=item *
How Do I Display Unicode? How Do I Input Unicode?
-See http://www.alanwood.net/unicode/ and
-http://www.cl.cam.ac.uk/~mgk25/unicode.html
+See L<http://www.alanwood.net/unicode/> and
+L<http://www.cl.cam.ac.uk/~mgk25/unicode.html>
=item *
Unicode Consortium
- http://www.unicode.org/
+L<http://www.unicode.org/>
=item *
Unicode FAQ
- http://www.unicode.org/unicode/faq/
+L<http://www.unicode.org/unicode/faq/>
=item *
Unicode Glossary
- http://www.unicode.org/glossary/
+L<http://www.unicode.org/glossary/>
=item *
Unicode Useful Resources
- http://www.unicode.org/unicode/onlinedat/resources.html
+L<http://www.unicode.org/unicode/onlinedat/resources.html>
=item *
Unicode and Multilingual Support in HTML, Fonts, Web Browsers and Other Applications
- http://www.alanwood.net/unicode/
+L<http://www.alanwood.net/unicode/>
=item *
UTF-8 and Unicode FAQ for Unix/Linux
- http://www.cl.cam.ac.uk/~mgk25/unicode.html
+L<http://www.cl.cam.ac.uk/~mgk25/unicode.html>
=item *
Legacy Character Sets
- http://www.czyborra.com/
- http://www.eki.ee/letter/
+L<http://www.czyborra.com/>
+L<http://www.eki.ee/letter/>
=item *
$Config{installprivlib}/unicore
-in Perl 5.8.0 or newer, and
+in Perl 5.8.0 or newer, and
$Config{installprivlib}/unicode
=head1 SEE ALSO
-L<perlunicode>, L<Encode>, L<encoding>, L<open>, L<utf8>, L<bytes>,
+L<perlunitut>, L<perlunicode>, L<Encode>, L<open>, L<utf8>, L<bytes>,
L<perlretut>, L<perlrun>, L<Unicode::Collate>, L<Unicode::Normalize>,
L<Unicode::UCD>
projects / p5sagit/p5-mst-13.2.git / blobdiff