C<exit(0)> is provided to indicate successful completion.
=head2 #! and quoting on non-Unix systems
+X<hashbang> X<#!>
Unix's #! technique can be simulated on other systems:
There is no general solution to all of this. It's just a mess.
=head2 Location of Perl
+X<perl, location of interpreter>
It may seem obvious to say, but Perl is useful only when users can
easily find it. When possible, it's good for both F</usr/bin/perl>
use 5.005_54;
=head2 Command Switches
+X<perl, command switches> X<command switches>
As with all standard commands, a single-character switch may be
clustered with the following switch, if any.
=over 5
=item B<-0>[I<octal/hexadecimal>]
+X<-0> X<$/>
specifies the input record separator (C<$/>) as an octal or
hexadecimal number. If there are no digits, the null character is the
consists of hexadecimal digits.)
=item B<-A[I<module>][=I<assertions>]>
+X<-A>
Activates the assertions given after the equal sign as a comma-separated
list of assertion names or regular expressions. If no assertion name
See L<assertions> and L<assertions::activate>.
=item B<-a>
+X<-a> X<autosplit>
turns on autosplit mode when used with a B<-n> or B<-p>. An implicit
split command to the @F array is done as the first thing inside the
An alternate delimiter may be specified using B<-F>.
=item B<-C [I<number/list>]>
+X<-C>
The C<-C> flag controls some Unicode of the Perl Unicode features.
switch was therefore "recycled".)
=item B<-c>
+X<-c>
causes Perl to check the syntax of the program and then exit without
executing it. Actually, it I<will> execute C<BEGIN>, C<CHECK>, and
be skipped.
=item B<-d>
+X<-d> X<-dt>
=item B<-dt>
will be used in the code being debugged.
=item B<-d:>I<foo[=bar,baz]>
+X<-d> X<-dt>
=item B<-dt:>I<foo[=bar,baz]>
See L<perldebug>.
=item B<-D>I<letters>
+X<-D> X<DEBUGGING> X<-DDEBUGGING>
=item B<-D>I<number>
See L<perldebug> for details and variations.
=item B<-e> I<commandline>
+X<-e>
may be used to enter one line of program. If B<-e> is given, Perl
will not look for a filename in the argument list. Multiple B<-e>
to use semicolons where you would in a normal program.
=item B<-f>
+X<-f>
Disable executing F<$Config{siteperl}/sitecustomize.pl> at
startup.
modules in non-standard locations.
=item B<-F>I<pattern>
+X<-F>
specifies the pattern to split on if B<-a> is also in effect. The
pattern may be surrounded by C<//>, C<"">, or C<''>, otherwise it will be
-put in single quotes.
+put in single quotes. You can't use literal whitespace in the pattern.
=item B<-h>
+X<-h>
prints a summary of the options.
=item B<-i>[I<extension>]
+X<-i> X<in-place>
specifies that files processed by the C<E<lt>E<gt>> construct are to be
edited in-place. It does this by renaming the input file, opening the
proceeds from STDIN to STDOUT as might be expected.
=item B<-I>I<directory>
+X<-I> X<@INC>
Directories specified by B<-I> are prepended to the search path for
modules (C<@INC>), and also tells the C preprocessor where to search for
searches /usr/include and /usr/lib/perl.
=item B<-l>[I<octnum>]
+X<-l> X<$/> X<$\>
enables automatic line-ending processing. It has two separate
effects. First, it automatically chomps C<$/> (the input record
This sets C<$\> to newline and then sets C<$/> to the null character.
=item B<-m>[B<->]I<module>
+X<-m> X<-M>
=item B<-M>[B<->]I<module>
could happen for example if Foo inherits from Exporter.)
=item B<-n>
+X<-n>
causes Perl to assume the following loop around your program, which
makes it iterate over filename arguments somewhat like B<sed -n> or
the implicit program loop, just as in B<awk>.
=item B<-p>
+X<-p>
causes Perl to assume the following loop around your program, which
makes it iterate over filename arguments somewhat like B<sed>:
the implicit loop, just as in B<awk>.
=item B<-P>
+X<-P>
B<NOTE: Use of -P is strongly discouraged because of its inherent
problems, including poor portability.>
=back
=item B<-s>
+X<-s>
enables rudimentary switch parsing for switches on the command
line after the program name but before any filename arguments (or before
warnings enabled you may get a lot of spurious "used only once" warnings.
=item B<-S>
+X<-S>
makes Perl use the PATH environment variable to search for the
program (unless the name of the program contains directory separators).
program will be searched for strictly on the PATH.
=item B<-t>
+X<-t>
Like B<-T>, but taint checks will issue warnings rather than fatal
errors. These warnings can be controlled normally with C<no warnings
always use the real B<-T>.
=item B<-T>
+X<-T>
forces "taint" checks to be turned on so you can test them. Ordinarily
these checks are done only when running setuid or setgid. It's a
that construct.
=item B<-u>
+X<-u>
This obsolete switch causes Perl to dump core after compiling your
program. You can then in theory take this core dump and turn it
for details.
=item B<-U>
+X<-U>
allows Perl to do unsafe operations. Currently the only "unsafe"
operations are the unlinking of directories while running as superuser,
taint-check warnings.
=item B<-v>
+X<-v>
prints the version and patchlevel of your perl executable.
=item B<-V>
+X<-V>
prints summary of the major perl configuration values and the current
values of @INC.
building_on 'linux' '5' '1' '9' now
=item B<-w>
+X<-w>
prints warnings about dubious constructs, such as variable names
that are mentioned only once and scalar variables that are used
of warnings; see L<warnings> or L<perllexwarn>.
=item B<-W>
+X<-W>
Enables all warnings regardless of C<no warnings> or C<$^W>.
See L<perllexwarn>.
=item B<-X>
+X<-X>
Disables all warnings regardless of C<use warnings> or C<$^W>.
See L<perllexwarn>.
=item B<-x>
+X<-x>
=item B<-x> I<directory>
=back
=head1 ENVIRONMENT
+X<perl, environment variables>
=over 12
=item HOME
+X<HOME>
Used if chdir has no argument.
=item LOGDIR
+X<LOGDIR>
Used if chdir has no argument and HOME is not set.
=item PATH
+X<PATH>
Used in executing subprocesses, and in finding the program if B<-S> is
used.
=item PERL5LIB
+X<PERL5LIB>
A list of directories in which to look for Perl library
files before looking in the standard library and the current
use lib "/my/directory";
=item PERL5OPT
+X<PERL5OPT>
Command-line options (switches). Switches in this variable are taken
as if they were on every Perl command line. Only the B<-[CDIMUdmtwA]>
enabled, and any subsequent options ignored.
=item PERLIO
+X<PERLIO>
A space (or colon) separated list of PerlIO layers. If perl is built
to use PerlIO system for IO (the default) these layers effect perl's IO.
=over 8
=item :bytes
+X<:bytes>
A pseudolayer that turns I<off> the C<:utf8> flag for the layer below.
Unlikely to be useful on its own in the global PERLIO environment variable.
You perhaps were thinking of C<:crlf:bytes> or C<:perlio:bytes>.
=item :crlf
+X<:crlf>
A layer which does CRLF to "\n" translation distinguishing "text" and
"binary" files in the manner of MS-DOS and similar operating systems.
as being an end-of-file marker.)
=item :mmap
+X<:mmap>
A layer which implements "reading" of files by using C<mmap()> to
make (whole) file appear in the process's address space, and then
using that as PerlIO's "buffer".
=item :perlio
+X<:perlio>
This is a re-implementation of "stdio-like" buffering written as a
PerlIO "layer". As such it will call whatever layer is below it for
its operations (typically C<:unix>).
=item :pop
+X<:pop>
An experimental pseudolayer that removes the topmost layer.
Use with the same care as is reserved for nitroglycerin.
=item :raw
+X<:raw>
A pseudolayer that manipulates other layers. Applying the C<:raw>
layer is equivalent to calling C<binmode($fh)>. It makes the stream
binary nature of the stream are also removed or disabled.
=item :stdio
+X<:stdio>
This layer provides PerlIO interface by wrapping system's ANSI C "stdio"
library calls. The layer provides both buffering and IO.
to do that.
=item :unix
+X<:unix>
Low level layer which calls C<read>, C<write> and C<lseek> etc.
=item :utf8
+X<:utf8>
A pseudolayer that turns on a flag on the layer below to tell perl
that output should be in utf8 and that input should be regarded as
use C<:bytes> layer.)
=item :win32
+X<:win32>
On Win32 platforms this I<experimental> layer uses native "handle" IO
rather than unix-like numeric file descriptor layer. Known to be
the default under Win32.
=item PERLIO_DEBUG
+X<PERLIO_DEBUG>
If set to the name of a file or device then certain operations of PerlIO
sub-system will be logged to that file (opened as append). Typical uses
with B<-T>.
=item PERLLIB
+X<PERLLIB>
A list of directories in which to look for Perl library
files before looking in the standard library and the current directory.
If PERL5LIB is defined, PERLLIB is not used.
=item PERL5DB
+X<PERL5DB>
The command used to load the debugger code. The default is:
BEGIN { require 'perl5db.pl' }
=item PERL5DB_THREADED
+X<PERL5DB_THREADED>
If set to a true value, indicates to the debugger that the code being
debugged uses threads.
=item PERL5SHELL (specific to the Win32 port)
+X<PERL5SHELL>
May be set to an alternative shell that perl must use internally for
executing "backtick" commands or system(). Default is C<cmd.exe /x/d/c>
look in COMSPEC to find a shell fit for interactive use).
=item PERL_ALLOW_NON_IFS_LSP (specific to the Win32 port)
+X<PERL_ALLOW_NON_IFS_LSP>
Set to 1 to allow the use of non-IFS compatible LSP's.
Perl normally searches for an IFS-compatible LSP because this is required
requiring IFS compatibility to work).
=item PERL_DEBUG_MSTATS
+X<PERL_DEBUG_MSTATS>
Relevant only if perl is compiled with the malloc included with the perl
distribution (that is, if C<perl -V:d_mymalloc> is 'define').
after compilation.
=item PERL_DESTRUCT_LEVEL
+X<PERL_DESTRUCT_LEVEL>
Relevant only if your perl executable was built with B<-DDEBUGGING>,
this controls the behavior of global destruction of objects and other
references. See L<perlhack/PERL_DESTRUCT_LEVEL> for more information.
=item PERL_DL_NONLAZY
+X<PERL_DL_NONLAZY>
Set to one to have perl resolve B<all> undefined symbols when it loads
a dynamic library. The default behaviour is to resolve symbols when
names even if the test suite doesn't call it.
=item PERL_ENCODING
+X<PERL_ENCODING>
If using the C<encoding> pragma without an explicit encoding name, the
PERL_ENCODING environment variable is consulted for an encoding name.
=item PERL_HASH_SEED
+X<PERL_HASH_SEED>
(Since Perl 5.8.1.) Used to randomise Perl's internal hash function.
To emulate the pre-5.8.1 behaviour, set to an integer (zero means
L</PERL_HASH_SEED_DEBUG> for more information.
=item PERL_HASH_SEED_DEBUG
+X<PERL_HASH_SEED_DEBUG>
(Since Perl 5.8.1.) Set to one to display (to STDERR) the value of
the hash seed at the beginning of execution. This, combined with
See also hash_seed() of L<Hash::Util>.
=item PERL_ROOT (specific to the VMS port)
+X<PERL_ROOT>
A translation concealed rooted logical name that contains perl and the
logical device for the @INC path on VMS only. Other logical names that
L<perlvms> and in F<README.vms> in the Perl source distribution.
=item PERL_SIGNALS
+X<PERL_SIGNALS>
In Perls 5.8.1 and later. If set to C<unsafe> the pre-Perl-5.8.0
signals behaviour (immediate but unsafe) is restored. If set to
See L<perlipc/"Deferred Signals (Safe Signals)">.
=item PERL_UNICODE
+X<PERL_UNICODE>
Equivalent to the B<-C> command-line switch. Note that this is not
a boolean variable-- setting this to C<"1"> is not the right way to
switch for more information.
=item SYS$LOGIN (specific to the VMS port)
+X<SYS$LOGIN>
Used if chdir has no argument and HOME and LOGDIR are not set.
projects / p5sagit/p5-mst-13.2.git / blobdiff