+=for comment
+Consistent formatting of this file is achieved with:
+ perl ./Porting/podtidy pod/perlrepository.pod
+
=head1 NAME
perlrepository - Using the Perl source repository
=head1 SYNOPSIS
-All of Perl's source code is kept centrally in a Git repository. The
-repository contains many Perl revisions from Perl 1 onwards and all the
-revisions from Perforce, the version control system we were using
-previously. This repository is accessible in different ways.
+All of Perl's source code is kept centrally in a Git repository at
+I<perl5.git.perl.org>. The repository contains many Perl revisions from
+Perl 1 onwards and all the revisions from Perforce, the version control
+system we were using previously. This repository is accessible in
+different ways.
The full repository takes up about 80MB of disk space. A check out of
-the blead branch (that is, the master branch, which contains bleadperl,
-the development version of perl 5) takes up about 160MB of disk space
-(including the repository). A build of bleadperl takes up about 200MB
-(including the repository and the check out).
+the blead branch (that is, the main development branch, which contains
+bleadperl, the development version of perl 5) takes up about 160MB of
+disk space (including the repository). A build of bleadperl takes up
+about 200MB (including the repository and the check out).
=head1 GETTING ACCESS TO THE REPOSITORY
=head2 READ ACCESS VIA THE WEB
-You may access this over the web. This allows you to browse the tree,
-see recent commits, search for particular commits and more. You may
-access it at:
+You may access the repository over the web. This allows you to browse
+the tree, see recent commits, subscribe to RSS feeds for the changes,
+search for particular commits and more. You may access it at:
http://perl5.git.perl.org/perl.git
+A mirror of the repository is found at:
+
+ http://github.com/github/perl
+
=head2 READ ACCESS VIA GIT
You will need a copy of Git for your computer. You can fetch a copy of
git clone ssh://perl5.git.perl.org/gitroot/perl.git perl-ssh
-This clones the repository and makes a local copy in the 'perl-ssh'
+This clones the repository and makes a local copy in the F<perl-ssh>
directory.
-If you clone using git, which is faster than ssh, then you will need to
-modify your config in order to enable pushing. Edit F<.git/config>
-where you will see something like:
+If you cloned using the git protocol, which is faster than ssh, then
+you will need to modify your config in order to enable pushing. Edit
+F<.git/config> where you will see something like:
[remote "origin"]
url = git://perl5.git.perl.org/perl.git
[remote "origin"]
url = ssh://perl5.git.perl.org/gitroot/perl.git
-NOTE: there are symlinks set up so that the /gitroot is actually
-optional.
+NOTE: there are symlinks set up so that the /gitroot is optional and
+since SSH is the default protocol you can actually shorten the "url" to
+C<perl5.git.perl.org:/perl.git>.
You can also set up your user name and e-mail address. For example
It is also possible to keep C<origin> as a git remote, and add a new
remote for ssh access:
- % git remote add camel user@camel:/gitroot/perl.git
+ % git remote add camel perl5.git.perl.org:/perl.git
This allows you to update your local repository by pulling from
C<origin>, which is faster and doesn't require you to authenticate, and
The C<fetch> command just updates the C<camel> refs, as the objects
themselves should have been fetched when pulling from C<origin>.
+The committers have access to 2 servers that serve perl5.git.perl.org.
+One is camel.booking.com, which is the 'master' repository. The
+perl5.git.perl.org IP address also lives on this machine. The second
+one is dromedary.booking.com, which can be used for general testing and
+development. Dromedary syncs the git tree from camel every few minutes,
+you should not push there. Both machines also have a full CPAN mirror.
+To share files with the general public, dromedary serves your
+~/public_html/ as http://users.perl5.git.perl.org/~yourlogin/
+
=head1 OVERVIEW OF THE REPOSITORY
Once you have changed into the repository directory, you can inspect
it.
After a clone the repository will contain a single local branch, which
-will be the current branch as well, as indicated by the asterix.
+will be the current branch as well, as indicated by the asterisk.
% git branch
* blead
% git checkout origin/maint-5.8-dor
+To make a local branch of a remote branch:
+
+ % git checkout -b maint-5.10 origin/maint-5.10
+
To switch back to blead:
% git checkout blead
and that there were further changes in the working directory not yet
staged. It also shows that there was an untracked file in the working
directory, and as you can see shows how to change all of this. It also
-shows that there is one commit on the working branch C<blead> which
-has not been pushed to the C<origin> remote yet. B<NOTE>: that this
-output is also what you see as a template if you do not provide a
-message to C<git commit>.
+shows that there is one commit on the working branch C<blead> which has
+not been pushed to the C<origin> remote yet. B<NOTE>: that this output
+is also what you see as a template if you do not provide a message to
+C<git commit>.
Assuming we commit all the mentioned changes above:
% git checkout blead
% git pull
+It's preferable to patch against the latest blead version, since this
+is where new development occurs for all changes other than critical bug
+fixes. Critical bug fix patches should be made against the relevant
+maint branches, or should be submitted with a note indicating all the
+branches where the fix should be applied.
+
Now that we have everything up to date, we need to create a temporary
new branch for these changes and switch into it:
Now commit your change locally:
- % git add AUTHORS
- % git commit -m 'Rename Leon Brocard to Orange Brocard'
+ % git commit -a -m 'Rename Leon Brocard to Orange Brocard'
Created commit 6196c1d: Rename Leon Brocard to Orange Brocard
1 files changed, 1 insertions(+), 1 deletions(-)
+You can examine your last commit with:
+
+ % git show HEAD
+
+and if you are not happy with either the description or the patch
+itself you can fix it up by editing the files once more and then issue:
+
+ % git commit -a --amend
+
Now you should create a patch file for all your local changes:
% git format-patch origin
0001-Rename-Leon-Brocard-to-Orange-Brocard.patch
You should now send an email to perl5-porters@perl.org with a
-description of your changes, and attach this patch file as an
+description of your changes, and include this patch file as an
attachment.
If you want to delete your temporary branch, you may do so with:
% git branch -D orange
Deleted branch orange.
+=head2 A note on derived files
+
+Be aware that many files in the distribution are derivative--avoid
+patching them, because git won't see the changes to them, and the build
+process will overwrite them. Patch the originals instead. Most
+utilities (like perldoc) are in this category, i.e. patch
+utils/perldoc.PL rather than utils/perldoc. Similarly, don't create
+patches for files under $src_root/ext from their copies found in
+$install_root/lib. If you are unsure about the proper location of a
+file that may have gotten copied while building the source
+distribution, consult the C<MANIFEST>.
+
+=for XXX
+
+What should we recommend about binary files now? Do we need anything?
+
+=head2 Getting your patch accepted
+
+The first thing you should include with your patch is a description of
+the problem that the patch corrects. If it is a code patch (rather
+than a documentation patch) you should also include a small test case
+that illustrates the bug (a patch to an existing test file is
+preferred).
+
+If you are submitting a code patch there are several other things that
+you need to do.
+
+=over 4
+
+=item Comments, Comments, Comments
+
+Be sure to adequately comment your code. While commenting every line
+is unnecessary, anything that takes advantage of side effects of
+operators, that creates changes that will be felt outside of the
+function being patched, or that others may find confusing should be
+documented. If you are going to err, it is better to err on the side
+of adding too many comments than too few.
+
+=item Style
+
+In general, please follow the particular style of the code you are
+patching.
+
+In particular, follow these general guidelines for patching Perl
+sources:
+
+ 8-wide tabs (no exceptions!)
+ 4-wide indents for code, 2-wide indents for nested CPP #defines
+ try hard not to exceed 79-columns
+ ANSI C prototypes
+ uncuddled elses and "K&R" style for indenting control constructs
+ no C++ style (//) comments
+ mark places that need to be revisited with XXX (and revisit often!)
+ opening brace lines up with "if" when conditional spans multiple
+ lines; should be at end-of-line otherwise
+ in function definitions, name starts in column 0 (return value is on
+ previous line)
+ single space after keywords that are followed by parens, no space
+ between function name and following paren
+ avoid assignments in conditionals, but if they're unavoidable, use
+ extra paren, e.g. "if (a && (b = c)) ..."
+ "return foo;" rather than "return(foo);"
+ "if (!foo) ..." rather than "if (foo == FALSE) ..." etc.
+
+=item Testsuite
+
+When submitting a patch you should make every effort to also include an
+addition to perl's regression tests to properly exercise your patch.
+Your testsuite additions should generally follow these guidelines
+(courtesy of Gurusamy Sarathy <gsar@activestate.com>):
+
+ Know what you're testing. Read the docs, and the source.
+ Tend to fail, not succeed.
+ Interpret results strictly.
+ Use unrelated features (this will flush out bizarre interactions).
+ Use non-standard idioms (otherwise you are not testing TIMTOWTDI).
+ Avoid using hardcoded test numbers whenever possible (the
+ EXPECTED/GOT found in t/op/tie.t is much more maintainable,
+ and gives better failure reports).
+ Give meaningful error messages when a test fails.
+ Avoid using qx// and system() unless you are testing for them. If you
+ do use them, make sure that you cover _all_ perl platforms.
+ Unlink any temporary files you create.
+ Promote unforeseen warnings to errors with $SIG{__WARN__}.
+ Be sure to use the libraries and modules shipped with the version
+ being tested, not those that were already installed.
+ Add comments to the code explaining what you are testing for.
+ Make updating the '1..42' string unnecessary. Or make sure that
+ you update it.
+ Test _all_ behaviors of a given operator, library, or function:
+ - All optional arguments
+ - Return values in various contexts (boolean, scalar, list, lvalue)
+ - Use both global and lexical variables
+ - Don't forget the exceptional, pathological cases.
+
+=back
+
=head1 ACCEPTING A PATCH
If you have received a patch file generated using the above section,
process:
% git apply bugfix.diff
- % git commit -am "Some fixing" --author="That Guy <that.guy@internets.com>"
+ % git commit -a -m "Some fixing" --author="That Guy <that.guy@internets.com>"
Now we can inspect the change:
- % git log
+ % git show HEAD
commit b1b3dab48344cff6de4087efca3dbd63548ab5e2
Author: Leon Brocard <acme@astray.com>
Date: Fri Dec 19 17:02:59 2008 +0000
Rename Leon Brocard to Orange Brocard
- ...
- % git diff blead
diff --git a/AUTHORS b/AUTHORS
index 293dd70..722c93e 100644
--- a/AUTHORS
=head1 CLEANING A WORKING DIRECTORY
The command C<git clean> can with varying arguments be used as a
-replacement for make-clean.
+replacement for C<make clean>.
To reset your working directory to a pristine condition you can do:
to remove all ignored untracked files, such as build and test
byproduct, but leave any manually created files alone.
-If you only want to cancel some uncommitted edits, you can use
-C<git checkout> and give it a list of files to be reverted.
+If you only want to cancel some uncommitted edits, you can use C<git
+checkout> and give it a list of files to be reverted, or C<git checkout
+-f> to revert them all.
If you want to cancel one or several commits, you can use C<git reset>.
#!/bin/sh
git clean -dxf
# If you can use ccache, add -Dcc=ccache\ gcc -Dld=gcc to the Configure line
- sh Configure -des -Dusedevel -Doptimize="-g" || exit 125
- make || exit 125
+ sh Configure -des -Dusedevel -Doptimize="-g"
+ test -f config.sh || exit 125
+ # Correct makefile for newer GNU gcc
+ perl -ni -we 'print unless /<(?:built-in|command)/' makefile x2p/makefile
+ # if you just need miniperl, replace test_prep with miniperl
+ make -j4 test_prep
+ -x ./perl || exit 125
./perl -Ilib ~/testcase.pl
+ ret=$?
+ git clean -dxf
+ exit $ret
This script may return C<125> to indicate that the corresponding commit
should be skipped. Otherwise, it returns the status of
Author: Dave Mitchell <davem@fdisolutions.com>
Date: Sat Feb 9 14:56:23 2008 +0000
- [perl #49472] Attributes + Unkown Error
+ [perl #49472] Attributes + Unknown Error
...
bisect run success
C<git help bisect> has much more information on how you can tweak your
binary searches.
-=head1 COMITTING TO MAINTENANCE VERSIONS
+=head1 SUBMITTING A PATCH VIA GITHUB
+
+GitHub is a website that makes it easy to fork and publish projects
+with Git. First you should set up a GitHub account and log in.
+
+Perl's git repository is mirrored on GitHub at this page:
+
+ http://github.com/github/perl/tree/blead
+
+Visit the page and click the "fork" button. This clones the Perl git
+repository for you and provides you with "Your Clone URL" from which
+you should clone:
+
+ % git clone git@github.com:USERNAME/perl.git perl-github
+
+We shall make the same patch as above, creating a new branch:
+
+ % cd perl-github
+ % git remote add upstream git://github.com/github/perl.git
+ % git pull upstream blead
+ % git checkout -b orange
+ % perl -pi -e 's{Leon Brocard}{Orange Brocard}' AUTHORS
+ % git commit -a -m 'Rename Leon Brocard to Orange Brocard'
+ % git push origin orange
+
+The orange branch has been pushed to GitHub, so you should now send an
+email to perl5-porters@perl.org with a description of your changes and
+the following information:
+
+ http://github.com/USERNAME/perl/tree/orange
+ git@github.com:USERNAME/perl.git branch orange
+
+=head1 MERGING FROM A BRANCH VIA GITHUB
+
+If someone has provided a branch via GitHub and you are a committer,
+you should use the following in your perl-ssh directory:
+
+ % git remote add dandv git://github.com/dandv/perl.git
+ % git fetch
+
+Now you can see the differences between the branch and blead:
+
+ % git diff dandv/blead
+
+And you can see the commits:
+
+ % git log dandv/blead
+
+If you approve of a specific commit, you can cherry pick it:
+
+ % git cherry-pick 3adac458cb1c1d41af47fc66e67b49c8dec2323f
+
+Or you could just merge the whole branch if you like it all:
+
+ % git merge dandv/blead
+
+And then push back to the repository:
+
+ % git push
+
+=head1 COMMITTING TO MAINTENANCE VERSIONS
+
+Maintenance versions should only be altered to add critical bug fixes.
To commit to a maintenance version of perl, you need to create a local
tracking branch:
% git checkout --track -b maint-5.005 origin/maint-5.005
-This creates a local branch named C<maint-5.005>, which tracks the remote
-branch C<origin/maint-5.005>. Then you can pull, commit, merge and push as
-before.
+This creates a local branch named C<maint-5.005>, which tracks the
+remote branch C<origin/maint-5.005>. Then you can pull, commit, merge
+and push as before.
You can also cherry-pick commits from blead and another branch, by
-using the C<git cherry-pick> command. It is recommended to use the B<-x>
-option to C<git cherry-pick> in order to record the SHA1 of the original
-commit in the new commit message.
+using the C<git cherry-pick> command. It is recommended to use the
+B<-x> option to C<git cherry-pick> in order to record the SHA1 of the
+original commit in the new commit message.
=head1 SEE ALSO
The git documentation, accessible via C<git help command>.
+