=head1 DESCRIPTION
-This page describes the syntax of regular expressions in Perl. For a
-description of how to I<use> regular expressions in matching
-operations, plus various examples of the same, see discussions
-of C<m//>, C<s///>, C<qr//> and C<??> in L<perlop/"Regexp Quote-Like Operators">.
+This page describes the syntax of regular expressions in Perl.
+
+if you haven't used regular expressions before, a quick-start
+introduction is available in L<perlrequick>, and a longer tutorial
+introduction is available in L<perlretut>.
+
+For reference on how regular expressions are used in matching
+operations, plus various examples of the same, see discussions of
+C<m//>, C<s///>, C<qr//> and C<??> in L<perlop/"Regexp Quote-Like
+Operators">.
Matching operations can have various modifiers. Modifiers
that relate to the interpretation of the regular expression inside
"^" to match only at the beginning of the string and "$" to match
only at the end (or just before a newline at the end) of the string.
Together, as /ms, they let the "." match any character whatsoever,
-while yet allowing "^" and "$" to match, respectively, just after
+while still allowing "^" and "$" to match, respectively, just after
and just before newlines within the string.
=item x
{n,m} Match at least n but not more than m times
(If a curly bracket occurs in any other context, it is treated
-as a regular character.) The "*" modifier is equivalent to C<{0,}>, the "+"
+as a regular character. In particular, the lower bound
+is not optional.) The "*" modifier is equivalent to C<{0,}>, the "+"
modifier to C<{1,}>, and the "?" modifier to C<{0,1}>. n and m are limited
to integral values less than a preset limit defined when perl is built.
This is usually 32766 on the most common platforms. The actual limit can
In addition, Perl defines the following:
\w Match a "word" character (alphanumeric plus "_")
- \W Match a non-word character
+ \W Match a non-"word" character
\s Match a whitespace character
\S Match a non-whitespace character
\d Match a digit character
\pP Match P, named property. Use \p{Prop} for longer names.
\PP Match non-P
\X Match eXtended Unicode "combining character sequence",
- equivalent to C<(?:\PM\pM*)>
- \C Match a single C char (octet) even under utf8.
-
-A C<\w> matches a single alphanumeric character, not a whole word.
-Use C<\w+> to match a string of Perl-identifier characters (which isn't
-the same as matching an English word). If C<use locale> is in effect, the
-list of alphabetic characters generated by C<\w> is taken from the
-current locale. See L<perllocale>. You may use C<\w>, C<\W>, C<\s>, C<\S>,
+ equivalent to (?:\PM\pM*)
+ \C Match a single C char (octet) even under Unicode.
+ NOTE: breaks up characters into their UTF-8 bytes,
+ so you may end up with malformed pieces of UTF-8.
+ Unsupported in lookbehind.
+
+A C<\w> matches a single alphanumeric character (an alphabetic
+character, or a decimal digit) or C<_>, not a whole word. Use C<\w+>
+to match a string of Perl-identifier characters (which isn't the same
+as matching an English word). If C<use locale> is in effect, the list
+of alphabetic characters generated by C<\w> is taken from the current
+locale. See L<perllocale>. You may use C<\w>, C<\W>, C<\s>, C<\S>,
C<\d>, and C<\D> within character classes, but if you try to use them
-as endpoints of a range, that's not a range, the "-" is understood literally.
-See L<utf8> for details about C<\pP>, C<\PP>, and C<\X>.
+as endpoints of a range, that's not a range, the "-" is understood
+literally. If Unicode is in effect, C<\s> matches also "\x{85}",
+"\x{2028}, and "\x{2029}", see L<perlunicode> for more details about
+C<\pP>, C<\PP>, and C<\X>, and L<perluniintro> about Unicode in general.
+You can define your own C<\p> and C<\P> propreties, see L<perlunicode>.
The POSIX character class syntax
alpha
alnum
ascii
+ blank [1]
cntrl
digit \d
graph
lower
print
punct
- space \s
+ space \s [2]
upper
- word \w
+ word \w [3]
xdigit
+=over
+
+=item [1]
+
+A GNU extension equivalent to C<[ \t]>, `all horizontal whitespace'.
+
+=item [2]
+
+Not exactly equivalent to C<\s> since the C<[[:space:]]> includes
+also the (very rare) `vertical tabulator', "\ck", chr(11).
+
+=item [3]
+
+A Perl extension, see above.
+
+=back
+
For example use C<[:upper:]> to match all the uppercase characters.
-Note that the C<[]> are part of the C<[::]> construct, not part of the whole
-character class. For example:
+Note that the C<[]> are part of the C<[::]> construct, not part of the
+whole character class. For example:
[01[:alpha:]%]
-matches one, zero, any alphabetic character, and the percentage sign.
+matches zero, one, any alphabetic character, and the percentage sign.
-If the C<utf8> pragma is used, the following equivalences to Unicode
-\p{} constructs hold:
+The following equivalences to Unicode \p{} constructs and equivalent
+backslash character classes (if available), will hold:
+
+ [:...:] \p{...} backslash
alpha IsAlpha
alnum IsAlnum
ascii IsASCII
+ blank IsSpace
cntrl IsCntrl
- digit IsDigit
+ digit IsDigit \d
graph IsGraph
lower IsLower
print IsPrint
punct IsPunct
space IsSpace
+ IsSpacePerl \s
upper IsUpper
word IsWord
xdigit IsXDigit
For example C<[:lower:]> and C<\p{IsLower}> are equivalent.
If the C<utf8> pragma is not used but the C<locale> pragma is, the
-classes correlate with the isalpha(3) interface (except for `word',
-which is a Perl extension, mirroring C<\w>).
+classes correlate with the usual isalpha(3) interface (except for
+`word' and `blank').
The assumedly non-obviously named classes are:
Any control character. Usually characters that don't produce output as
such but instead control the terminal somehow: for example newline and
backspace are control characters. All characters with ord() less than
-32 are most often control classified as characters.
+32 are most often classified as control characters (assuming ASCII,
+the ISO Latin character sets, and Unicode), as is the character with
+the ord() value of 127 (C<DEL>).
=item graph
-Any alphanumeric or punctuation character.
+Any alphanumeric or punctuation (special) character.
=item print
-Any alphanumeric or punctuation character or space.
+Any alphanumeric or punctuation (special) character or the space character.
=item punct
-Any punctuation character.
+Any punctuation (special) character.
=item xdigit
-Any hexadecimal digit. Though this may feel silly (/0-9a-f/i would
+Any hexadecimal digit. Though this may feel silly ([0-9A-Fa-f] would
work just fine) it is included for completeness.
-=item
-
=back
You can negate the [::] character classes by prefixing the class name
with a '^'. This is a Perl extension. For example:
- POSIX trad. Perl utf8 Perl
+ POSIX traditional Unicode
[:^digit:] \D \P{IsDigit}
[:^space:] \S \P{IsSpace}
[:^word:] \W \P{IsWord}
-The POSIX character classes [.cc.] and [=cc=] are recognized but
-B<not> supported and trying to use them will cause an error.
+Perl respects the POSIX standard in that POSIX character classes are
+only supported within a character class. The POSIX character classes
+[.cc.] and [=cc=] are recognized but B<not> supported and trying to
+use them will cause an error.
Perl defines the following zero-width assertions:
several patterns that you want to match against consequent substrings
of your string, see the previous reference. The actual location
where C<\G> will match can also be influenced by using C<pos()> as
-an lvalue. See L<perlfunc/pos>.
-
+an lvalue: see L<perlfunc/pos>. Currently C<\G> is only fully
+supported when anchored to the start of the pattern; while it
+is permitted to use it elsewhere, as in C</(?<=\G..)./g>, some
+such uses (C</.\G/g>, for example) currently cause problems, and
+it is recommended that you avoid such usage for now.
+
The bracketing construct C<( ... )> creates capture buffers. To
-refer to the digit'th buffer use \E<lt>digitE<gt> within the
+refer to the digit'th buffer use \<digit> within the
match. Outside the match use "$" instead of "\". (The
-\E<lt>digitE<gt> notation works in certain circumstances outside
+\<digit> notation works in certain circumstances outside
the match. See the warning below about \1 vs $1 for details.)
Referring back to another part of the match is called a
I<backreference>.
There is no limit to the number of captured substrings that you may
use. However Perl also uses \10, \11, etc. as aliases for \010,
-\011, etc. (Recall that 0 means octal, so \011 is the 9'th ASCII
-character, a tab.) Perl resolves this ambiguity by interpreting
-\10 as a backreference only if at least 10 left parentheses have
-opened before it. Likewise \11 is a backreference only if at least
-11 left parentheses have opened before it. And so on. \1 through
-\9 are always interpreted as backreferences."
+\011, etc. (Recall that 0 means octal, so \011 is the character at
+number 9 in your coded character set; which would be the 10th character,
+a horizontal tab under ASCII.) Perl resolves this
+ambiguity by interpreting \10 as a backreference only if at least 10
+left parentheses have opened before it. Likewise \11 is a
+backreference only if at least 11 left parentheses have opened
+before it. And so on. \1 through \9 are always interpreted as
+backreferences.
Examples:
if (/(.)\1/) { # find first doubled char
print "'$1' is the first doubled character\n";
}
-
+
if (/Time: (..):(..):(..)/) { # parse out values
$hours = $1;
$minutes = $2;
$seconds = $3;
}
-
+
Several special variables also refer back to portions of the previous
match. C<$+> returns whatever the last bracket match matched.
C<$&> returns the entire matched string. (At one point C<$0> did
also, but now it returns the name of the program.) C<$`> returns
-everything before the matched string. And C<$'> returns everything
-after the matched string.
+everything before the matched string. C<$'> returns everything
+after the matched string. And C<$^N> contains whatever was matched by
+the most-recently closed group (submatch). C<$^N> can be used in
+extended patterns (see below), for example to assign a submatch to a
+variable.
The numbered variables ($1, $2, $3, etc.) and the related punctuation
-set (C<<$+>, C<$&>, C<$`>, and C<$'>) are all dynamically scoped
+set (C<$+>, C<$&>, C<$`>, C<$'>, and C<$^N>) are all dynamically scoped
until the end of the enclosing block or until the next successful
match, whichever comes first. (See L<perlsyn/"Compound Statements">.)
Backslashed metacharacters in Perl are alphanumeric, such as C<\b>,
C<\w>, C<\n>. Unlike some other regular expression languages, there
are no backslashed symbols that aren't alphanumeric. So anything
-that looks like \\, \(, \), \E<lt>, \E<gt>, \{, or \} is always
+that looks like \\, \(, \), \<, \>, \{, or \} is always
interpreted as a literal character, not a metacharacter. This was
once used in a common idiom to disable or quote the special meanings
of regular expression metacharacters in a string that you want to
-use for a pattern. Simply quote all non-alphanumeric characters:
+use for a pattern. Simply quote all non-"word" characters:
$pattern =~ s/(\W)/\\$1/g;
+(If C<use locale> is set, then this depends on the current locale.)
Today it is more common to use the quotemeta() function or the C<\Q>
metaquoting escape sequence to disable all metacharacters' special
meanings like this:
=item C<(?imsx-imsx)>
-One or more embedded pattern-match modifiers. This is particularly
-useful for dynamic patterns, such as those read in from a configuration
-file, read in as an argument, are specified in a table somewhere,
-etc. Consider the case that some of which want to be case sensitive
-and some do not. The case insensitive ones need to include merely
-C<(?i)> at the front of the pattern. For example:
+One or more embedded pattern-match modifiers, to be turned on (or
+turned off, if preceded by C<->) for the remainder of the pattern or
+the remainder of the enclosing pattern group (if any). This is
+particularly useful for dynamic patterns, such as those read in from a
+configuration file, read in as an argument, are specified in a table
+somewhere, etc. Consider the case that some of which want to be case
+sensitive and some do not. The case insensitive ones need to include
+merely C<(?i)> at the front of the pattern. For example:
$pattern = "foobar";
if ( /$pattern/i ) { }
$pattern = "(?i)foobar";
if ( /$pattern/ ) { }
-Letters after a C<-> turn those modifiers off. These modifiers are
-localized inside an enclosing group (if any). For example,
+These modifiers are restored at the end of the enclosing group. For example,
( (?i) blah ) \s+ \1
For look-behind see below.
-=item C<(?E<lt>=pattern)>
+=item C<(?<=pattern)>
-A zero-width positive look-behind assertion. For example, C</(?E<lt>=\t)\w+/>
+A zero-width positive look-behind assertion. For example, C</(?<=\t)\w+/>
matches a word that follows a tab, without including the tab in C<$&>.
Works only for fixed-width look-behind.
always succeeds, and its C<code> is not interpolated. Currently,
the rules to determine where the C<code> ends are somewhat convoluted.
+This feature can be used together with the special variable C<$^N> to
+capture the results of submatches in variables without having to keep
+track of the number of nested parentheses. For example:
+
+ $_ = "The brown fox jumps over the lazy dog";
+ /the (\S+)(?{ $color = $^N }) (\S+)(?{ $animal = $^N })/i;
+ print "color = $color, animal = $animal\n";
+
The C<code> is properly scoped in the following sense: If the assertion
is backtracked (compare L<"Backtracking">), all changes introduced after
C<local>ization are undone, so that
Better yet, use the carefully constrained evaluation within a Safe
module. See L<perlsec> for details about both these mechanisms.
-=item C<(?p{ code })>
+=item C<(??{ code })>
B<WARNING>: This extended regular expression feature is considered
highly experimental, and may be changed or deleted without notice.
(?:
(?> [^()]+ ) # Non-parens without backtracking
|
- (?p{ $re }) # Group with matching parens
+ (??{ $re }) # Group with matching parens
)*
\)
}x;
-=item C<(?E<gt>pattern)>
+=item C<< (?>pattern) >>
B<WARNING>: This extended regular expression feature is considered
highly experimental, and may be changed or deleted without notice.
It may also be useful in places where the "grab all you can, and do not
give anything back" semantic is desirable.
-For example: C<^(?E<gt>a*)ab> will never match, since C<(?E<gt>a*)>
+For example: C<< ^(?>a*)ab >> will never match, since C<< (?>a*) >>
(anchored at the beginning of string, as above) will match I<all>
characters C<a> at the beginning of string, leaving no C<a> for
C<ab> to match. In contrast, C<a*ab> will match the same as C<a+b>,
C<a*ab> will match fewer characters than a standalone C<a*>, since
this makes the tail match.
-An effect similar to C<(?E<gt>pattern)> may be achieved by writing
+An effect similar to C<< (?>pattern) >> may be achieved by writing
C<(?=(pattern))\1>. This matches the same substring as a standalone
C<a+>, and the following C<\1> eats the matched string; it therefore
-makes a zero-length assertion into an analogue of C<(?E<gt>...)>.
+makes a zero-length assertion into an analogue of C<< (?>...) >>.
(The difference between these two constructs is that the second one
uses a capturing group, thus shifting ordinals of backreferences
in the rest of a regular expression.)
\)
}x
-which uses C<(?E<gt>...)> matches exactly when the one above does (verifying
+which uses C<< (?>...) >> matches exactly when the one above does (verifying
this yourself would be a productive exercise), but finishes in a fourth
the time when used on a similar string with 1000000 C<a>s. Be aware,
however, that this pattern currently triggers a warning message under
-B<-w> saying it C<"matches the null string many times">):
+the C<use warnings> pragma or B<-w> switch saying it
+C<"matches null string many times in regex">.
-On simple groups, such as the pattern C<(?E<gt> [^()]+ )>, a comparable
+On simple groups, such as the pattern C<< (?> [^()]+ ) >>, a comparable
effect may be achieved by negative look-ahead, as in C<[^()]+ (?! [^()] )>.
This was only 4 times slower on a string with 1000000 C<a>s.
in many situations where on the first sight a simple C<()*> looks like
the correct solution. Suppose we parse text with comments being delimited
by C<#> followed by some optional (horizontal) whitespace. Contrary to
-its appearence, C<#[ \t]*> I<is not> the correct subexpression to match
+its appearance, C<#[ \t]*> I<is not> the correct subexpression to match
the comment delimiter, because it may "give up" some whitespace if
the remainder of the pattern can be made to match that way. The correct
answer is either one of these:
got <d is under the >
Here's another example: let's say you'd like to match a number at the end
-of a string, and you also want to keep the preceding part the match.
+of a string, and you also want to keep the preceding part of the match.
So you write this:
$_ = "I have 2 numbers: 53147";
know which variety of success you will achieve.
When using look-ahead assertions and negations, this can all get even
-tricker. Imagine you'd like to find a sequence of non-digits not
+trickier. Imagine you'd like to find a sequence of non-digits not
followed by "123". You might try to write that as
$_ = "ABC123";
But that isn't going to match; at least, not the way you're hoping. It
claims that there is no 123 in the string. Here's a clearer picture of
-why it that pattern matches, contrary to popular expectations:
+why that pattern matches, contrary to popular expectations:
$x = 'ABC123' ;
$y = 'ABC445' ;
internal optimizations done by the regular expression engine, this will
take a painfully long time to run:
- 'aaaaaaaaaaaa' =~ /((a{0,5}){0,5}){0,5}[c]/
+ 'aaaaaaaaaaaa' =~ /((a{0,5}){0,5})*[c]/
-And if you used C<*>'s instead of limiting it to 0 through 5 matches,
-then it would take forever--or until you ran out of stack space.
+And if you used C<*>'s in the internal groups instead of limiting them
+to 0 through 5 matches, then it would take forever--or until you ran
+out of stack space. Moreover, these internal optimizations are not
+always applicable. For example, if you put C<{0,5}> instead of C<*>
+on the external group, no current optimization is applicable, and the
+match takes a long time to finish.
A powerful tool for optimizing such beasts is what is known as an
"independent group",
-which does not backtrack (see L<C<(?E<gt>pattern)>>). Note also that
+which does not backtrack (see L<C<< (?>pattern) >>>). Note also that
zero-length look-ahead/look-behind assertions will not backtrack to make
the tail match, since they are in "logical" context: only
whether they match is considered relevant. For an example
where side-effects of look-ahead I<might> have influenced the
-following match, see L<C<(?E<gt>pattern)>>.
+following match, see L<C<< (?>pattern) >>>.
=head2 Version 8 Regular Expressions
at the end of the list, just before the closing "]". (The
following all specify the same class of three characters: C<[-az]>,
C<[az-]>, and C<[a\-z]>. All are different from C<[a-z]>, which
-specifies a class containing twenty-six characters.)
-Also, if you try to use the character classes C<\w>, C<\W>, C<\s>,
-C<\S>, C<\d>, or C<\D> as endpoints of a range, that's not a range,
-the "-" is understood literally.
+specifies a class containing twenty-six characters, even on EBCDIC
+based coded character sets.) Also, if you try to use the character
+classes C<\w>, C<\W>, C<\s>, C<\S>, C<\d>, or C<\D> as endpoints of
+a range, that's not a range, the "-" is understood literally.
Note also that the whole range idea is rather unportable between
character sets--and even within character sets they may cause results
Characters may be specified using a metacharacter syntax much like that
used in C: "\n" matches a newline, "\t" a tab, "\r" a carriage return,
"\f" a form feed, etc. More generally, \I<nnn>, where I<nnn> is a string
-of octal digits, matches the character whose ASCII value is I<nnn>.
-Similarly, \xI<nn>, where I<nn> are hexadecimal digits, matches the
-character whose ASCII value is I<nn>. The expression \cI<x> matches the
-ASCII character control-I<x>. Finally, the "." metacharacter matches any
-character except "\n" (unless you use C</s>).
+of octal digits, matches the character whose coded character set value
+is I<nnn>. Similarly, \xI<nn>, where I<nn> are hexadecimal digits,
+matches the character whose numeric value is I<nn>. The expression \cI<x>
+matches the character control-I<x>. Finally, the "." metacharacter
+matches any character except "\n" (unless you use C</s>).
You can specify a series of alternatives for a pattern using "|" to
separate them, so that C<fee|fie|foe> will match any of "fee", "fie",
This is grandfathered for the RHS of a substitute to avoid shocking the
B<sed> addicts, but it's a dirty habit to get into. That's because in
-PerlThink, the righthand side of a C<s///> is a double-quoted string. C<\1> in
+PerlThink, the righthand side of an C<s///> is a double-quoted string. C<\1> in
the usual double-quoted string means a control-A. The customary Unix
meaning of C<\1> is kludged in for C<s///>. However, if you get into the habit
of doing that, you get yourself into trouble if you then add an C</e>
$_ = 'bar';
s/\w??/<$&>/g;
-results in C<"<><b><><a><><r><>">. At each position of the string the best
+results in C<< <><b><><a><><r><> >>. At each position of the string the best
match given by non-greedy C<??> is the zero-length match, and the I<second
best> match is what is matched by C<\w>. Thus zero-length matches
alternate with one-character-long matches.
notion of better/worse for combining operators. In the description
below C<S> and C<T> are regular subexpressions.
-=over
+=over 4
=item C<ST>
Same as C<S{0,1}?>, C<S{0,BIG_NUMBER}?>, C<S{1,BIG_NUMBER}?> respectively.
-=item C<(?E<gt>S)>
+=item C<< (?>S) >>
Matches the best match for C<S> and only that.
For this grouping operator there is no need to describe the ordering, since
only whether or not C<S> can match is important.
-=item C<(?p{ EXPR })>
+=item C<(??{ EXPR })>
The ordering is the same as for the regular expression which is
the result of EXPR.
=head1 SEE ALSO
+L<perlrequick>.
+
+L<perlretut>.
+
L<perlop/"Regexp Quote-Like Operators">.
L<perlop/"Gory details of parsing quoted constructs">.
L<perllocale>.
+L<perlebcdic>.
+
I<Mastering Regular Expressions> by Jeffrey Friedl, published
by O'Reilly and Associates.