=head1 DESCRIPTION
-For a description of how to use regular expressions in matching
-operations, see C<m//> and C<s///> in L<perlop>. The matching operations can
-have various modifiers, some of which relate to the interpretation of
-the regular expression inside. These are:
+This page describes the syntax of regular expressions in Perl. For a
+description of how to I<use> regular expressions in matching
+operations, plus various examples of the same, see discussions
+of C<m//>, C<s///>, C<qr//> and C<??> in L<perlop/"Regexp Quote-Like Operators">.
- i Do case-insensitive pattern matching.
- m Treat string as multiple lines.
- s Treat string as single line.
- x Use extended regular expressions.
+Matching operations can have various modifiers. Modifiers
+that relate to the interpretation of the regular expression inside
+are listed below. Modifiers that alter the way a regular expression
+is used by Perl are detailed in L<perlop/"Regexp Quote-Like Operators"> and
+L<perlop/"Gory details of parsing quoted constructs">.
+
+=over 4
+
+=item i
+
+Do case-insensitive pattern matching.
+
+If C<use locale> is in effect, the case map is taken from the current
+locale. See L<perllocale>.
+
+=item m
+
+Treat string as multiple lines. That is, change "^" and "$" from matching
+the start or end of the string to matching the start or end of any
+line anywhere within the string.
+
+=item s
+
+Treat string as single line. That is, change "." to match any character
+whatsoever, even a newline, which normally it would not match.
+
+The C</s> and C</m> modifiers both override the C<$*> setting. That
+is, no matter what C<$*> contains, C</s> without C</m> will force
+"^" to match only at the beginning of the string and "$" to match
+only at the end (or just before a newline at the end) of the string.
+Together, as /ms, they let the "." match any character whatsoever,
+while yet allowing "^" and "$" to match, respectively, just after
+and just before newlines within the string.
+
+=item x
+
+Extend your pattern's legibility by permitting whitespace and comments.
+
+=back
These are usually written as "the C</x> modifier", even though the delimiter
-in question might not actually be a slash. In fact, any of these
+in question might not really be a slash. Any of these
modifiers may also be embedded within the regular expression itself using
-the new C<(?...)> construct. See below.
+the C<(?...)> construct. See below.
The C</x> modifier itself needs a little more explanation. It tells
-the regular expression parser to ignore whitespace that is not
-backslashed or within a character class. You can use this to break up
+the regular expression parser to ignore whitespace that is neither
+backslashed nor within a character class. You can use this to break up
your regular expression into (slightly) more readable parts. The C<#>
character is also treated as a metacharacter introducing a comment,
-just as in ordinary Perl code. Taken together, these features go a
-long way towards making Perl 5 a readable language. See the C comment
-deletion code in L<perlop>.
+just as in ordinary Perl code. This also means that if you want real
+whitespace or C<#> characters in the pattern (outside a character
+class, where they are unaffected by C</x>), that you'll either have to
+escape them or encode them using octal or hex escapes. Taken together,
+these features go a long way towards making Perl's regular expressions
+more readable. Note that you have to be careful not to include the
+pattern delimiter in the comment--perl has no way of knowing you did
+not intend to close the pattern early. See the C-comment deletion code
+in L<perlop>.
=head2 Regular Expressions
-The patterns used in pattern matching are regular expressions such as
-those supplied in the Version 8 regexp routines. (In fact, the
-routines are derived (distantly) from Henry Spencer's freely
-redistributable reimplementation of the V8 routines.)
-See L<Version 8 Regular Expressions> for details.
+The patterns used in Perl pattern matching derive from supplied in
+the Version 8 regex routines. (The routines are derived
+(distantly) from Henry Spencer's freely redistributable reimplementation
+of the V8 routines.) See L<Version 8 Regular Expressions> for
+details.
In particular the following metacharacters have their standard I<egrep>-ish
meanings:
\ Quote the next metacharacter
^ Match the beginning of the line
. Match any character (except newline)
- $ Match the end of the line
+ $ Match the end of the line (or before newline at the end)
| Alternation
() Grouping
[] Character class
-By default, the "^" character is guaranteed to match only at the
-beginning of the string, the "$" character only at the end (or before the
-newline at the end) and Perl does certain optimizations with the
+By default, the "^" character is guaranteed to match only the
+beginning of the string, the "$" character only the end (or before the
+newline at the end), and Perl does certain optimizations with the
assumption that the string contains only one line. Embedded newlines
will not be matched by "^" or "$". You may, however, wish to treat a
string as a multi-line buffer, such that the "^" will match after any
newline within the string, and "$" will match before any newline. At the
cost of a little more overhead, you can do this by using the /m modifier
on the pattern match operator. (Older programs did this by setting C<$*>,
-but this practice is deprecated in Perl 5.)
+but this practice is now deprecated.)
-To facilitate multi-line substitutions, the "." character never matches a
-newline unless you use the C</s> modifier, which tells Perl to pretend
+To simplify multi-line substitutions, the "." character never matches a
+newline unless you use the C</s> modifier, which in effect tells Perl to pretend
the string is a single line--even if it isn't. The C</s> modifier also
overrides the setting of C<$*>, in case you have some (badly behaved) older
code that sets it in another module.
(If a curly bracket occurs in any other context, it is treated
as a regular character.) The "*" modifier is equivalent to C<{0,}>, the "+"
modifier to C<{1,}>, and the "?" modifier to C<{0,1}>. n and m are limited
-to integral values less than 65536.
+to integral values less than a preset limit defined when perl is built.
+This is usually 32766 on the most common platforms. The actual limit can
+be seen in the error message generated by code such as this:
+
+ $_ **= $_ , / {$_} / for 2 .. 42;
By default, a quantified subpattern is "greedy", that is, it will match as
-many times as possible without causing the rest pattern not to match. The
-standard quantifiers are all "greedy", in that they match as many
-occurrences as possible (given a particular starting location) without
-causing the pattern to fail. If you want it to match the minimum number
-of times possible, follow the quantifier with a "?" after any of them.
-Note that the meanings don't change, just the "gravity":
+many times as possible (given a particular starting location) while still
+allowing the rest of the pattern to match. If you want it to match the
+minimum number of times possible, follow the quantifier with a "?". Note
+that the meanings don't change, just the "greediness":
*? Match 0 or more times
+? Match 1 or more times
{n,}? Match at least n times
{n,m}? Match at least n but not more than m times
-Since patterns are processed as double quoted strings, the following
+Because patterns are processed as double quoted strings, the following
also work:
- \t tab
- \n newline
- \r return
- \f form feed
- \v vertical tab, whatever that is
- \a alarm (bell)
- \e escape
- \033 octal char
- \x1b hex char
+ \t tab (HT, TAB)
+ \n newline (LF, NL)
+ \r return (CR)
+ \f form feed (FF)
+ \a alarm (bell) (BEL)
+ \e escape (think troff) (ESC)
+ \033 octal char (think of a PDP-11)
+ \x1B hex char
+ \x{263a} wide hex char (Unicode SMILEY)
\c[ control char
- \l lowercase next char
- \u uppercase next char
- \L lowercase till \E
- \U uppercase till \E
- \E end case modification
- \Q quote regexp metacharacters till \E
+ \N{name} named char
+ \l lowercase next char (think vi)
+ \u uppercase next char (think vi)
+ \L lowercase till \E (think vi)
+ \U uppercase till \E (think vi)
+ \E end case modification (think vi)
+ \Q quote (disable) pattern metacharacters till \E
+
+If C<use locale> is in effect, the case map used by C<\l>, C<\L>, C<\u>
+and C<\U> is taken from the current locale. See L<perllocale>. For
+documentation of C<\N{name}>, see L<charnames>.
+
+You cannot include a literal C<$> or C<@> within a C<\Q> sequence.
+An unescaped C<$> or C<@> interpolates the corresponding variable,
+while escaping will cause the literal string C<\$> to be matched.
+You'll need to write something like C<m/\Quser\E\@\Qhost/>.
In addition, Perl defines the following:
\w Match a "word" character (alphanumeric plus "_")
- \W Match a non-word character
+ \W Match a non-"word" character
\s Match a whitespace character
\S Match a non-whitespace character
\d Match a digit character
\D Match a non-digit character
+ \pP Match P, named property. Use \p{Prop} for longer names.
+ \PP Match non-P
+ \X Match eXtended Unicode "combining character sequence",
+ equivalent to C<(?:\PM\pM*)>
+ \C Match a single C char (octet) even under utf8.
+
+A C<\w> matches a single alphanumeric character or C<_>, not a whole word.
+Use C<\w+> to match a string of Perl-identifier characters (which isn't
+the same as matching an English word). If C<use locale> is in effect, the
+list of alphabetic characters generated by C<\w> is taken from the
+current locale. See L<perllocale>. You may use C<\w>, C<\W>, C<\s>, C<\S>,
+C<\d>, and C<\D> within character classes, but if you try to use them
+as endpoints of a range, that's not a range, the "-" is understood literally.
+See L<utf8> for details about C<\pP>, C<\PP>, and C<\X>.
+
+The POSIX character class syntax
+
+ [:class:]
+
+is also available. The available classes and their backslash
+equivalents (if available) are as follows:
+
+ alpha
+ alnum
+ ascii
+ blank [1]
+ cntrl
+ digit \d
+ graph
+ lower
+ print
+ punct
+ space \s [2]
+ upper
+ word \w [3]
+ xdigit
+
+ [1] A GNU extension equivalent to C<[ \t]>, `all horizontal whitespace'.
+ [2] Not I<exactly equivalent> to C<\s> since the C<[[:space:]]> includes
+ also the (very rare) `vertical tabulator', "\ck", chr(11).
+ [3] A Perl extension.
+
+For example use C<[:upper:]> to match all the uppercase characters.
+Note that the C<[]> are part of the C<[::]> construct, not part of the
+whole character class. For example:
+
+ [01[:alpha:]%]
+
+matches zero, one, any alphabetic character, and the percentage sign.
+
+If the C<utf8> pragma is used, the following equivalences to Unicode
+\p{} constructs hold:
+
+ alpha IsAlpha
+ alnum IsAlnum
+ ascii IsASCII
+ blank IsSpace
+ cntrl IsCntrl
+ digit IsDigit
+ graph IsGraph
+ lower IsLower
+ print IsPrint
+ punct IsPunct
+ space IsSpace
+ upper IsUpper
+ word IsWord
+ xdigit IsXDigit
+
+For example C<[:lower:]> and C<\p{IsLower}> are equivalent.
+
+If the C<utf8> pragma is not used but the C<locale> pragma is, the
+classes correlate with the usual isalpha(3) interface (except for
+`word' and `blank').
+
+The assumedly non-obviously named classes are:
+
+=over 4
+
+=item cntrl
+
+Any control character. Usually characters that don't produce output as
+such but instead control the terminal somehow: for example newline and
+backspace are control characters. All characters with ord() less than
+32 are most often classified as control characters (assuming ASCII,
+the ISO Latin character sets, and Unicode).
-Note that C<\w> matches a single alphanumeric character, not a whole
-word. To match a word you'd need to say C<\w+>. You may use C<\w>, C<\W>, C<\s>,
-C<\S>, C<\d> and C<\D> within character classes (though not as either end of a
-range).
+=item graph
+
+Any alphanumeric or punctuation (special) character.
+
+=item print
+
+Any alphanumeric or punctuation (special) character or space.
+
+=item punct
+
+Any punctuation (special) character.
+
+=item xdigit
+
+Any hexadecimal digit. Though this may feel silly ([0-9A-Fa-f] would
+work just fine) it is included for completeness.
+
+=back
+
+You can negate the [::] character classes by prefixing the class name
+with a '^'. This is a Perl extension. For example:
+
+ POSIX trad. Perl utf8 Perl
+
+ [:^digit:] \D \P{IsDigit}
+ [:^space:] \S \P{IsSpace}
+ [:^word:] \W \P{IsWord}
+
+The POSIX character classes [.cc.] and [=cc=] are recognized but
+B<not> supported and trying to use them will cause an error.
Perl defines the following zero-width assertions:
\b Match a word boundary
\B Match a non-(word boundary)
\A Match only at beginning of string
- \Z Match only at end of string
- \G Match only where previous m//g left off
-
-A word boundary (C<\b>) is defined as a spot between two characters that
-has a C<\w> on one side of it and and a C<\W> on the other side of it (in
-either order), counting the imaginary characters off the beginning and
-end of the string as matching a C<\W>. (Within character classes C<\b>
-represents backspace rather than a word boundary.) The C<\A> and C<\Z> are
-just like "^" and "$" except that they won't match multiple times when the
-C</m> modifier is used, while "^" and "$" will match at every internal line
-boundary.
-
-When the bracketing construct C<( ... )> is used, \<digit> matches the
-digit'th substring. (Outside of the pattern, always use "$" instead of
-"\" in front of the digit. The scope of $<digit> (and C<$`>, C<$&>, and C<$')>
-extends to the end of the enclosing BLOCK or eval string, or to the
-next successful pattern match, whichever comes first.
-If you want to
-use parentheses to delimit subpattern (e.g. a set of alternatives) without
-saving it as a subpattern, follow the ( with a ?.
-The \<digit> notation
-sometimes works outside the current pattern, but should not be relied
-upon.) You may have as many parentheses as you wish. If you have more
-than 9 substrings, the variables $10, $11, ... refer to the
-corresponding substring. Within the pattern, \10, \11, etc. refer back
-to substrings if there have been at least that many left parens before
-the backreference. Otherwise (for backward compatibilty) \10 is the
-same as \010, a backspace, and \11 the same as \011, a tab. And so
-on. (\1 through \9 are always backreferences.)
-
-C<$+> returns whatever the last bracket match matched. C<$&> returns the
-entire matched string. ($0 used to return the same thing, but not any
-more.) C<$`> returns everything before the matched string. C<$'> returns
-everything after the matched string. Examples:
+ \Z Match only at end of string, or before newline at the end
+ \z Match only at end of string
+ \G Match only at pos() (e.g. at the end-of-match position
+ of prior m//g)
+
+A word boundary (C<\b>) is a spot between two characters
+that has a C<\w> on one side of it and a C<\W> on the other side
+of it (in either order), counting the imaginary characters off the
+beginning and end of the string as matching a C<\W>. (Within
+character classes C<\b> represents backspace rather than a word
+boundary, just as it normally does in any double-quoted string.)
+The C<\A> and C<\Z> are just like "^" and "$", except that they
+won't match multiple times when the C</m> modifier is used, while
+"^" and "$" will match at every internal line boundary. To match
+the actual end of the string and not ignore an optional trailing
+newline, use C<\z>.
+
+The C<\G> assertion can be used to chain global matches (using
+C<m//g>), as described in L<perlop/"Regexp Quote-Like Operators">.
+It is also useful when writing C<lex>-like scanners, when you have
+several patterns that you want to match against consequent substrings
+of your string, see the previous reference. The actual location
+where C<\G> will match can also be influenced by using C<pos()> as
+an lvalue. See L<perlfunc/pos>.
+
+The bracketing construct C<( ... )> creates capture buffers. To
+refer to the digit'th buffer use \<digit> within the
+match. Outside the match use "$" instead of "\". (The
+\<digit> notation works in certain circumstances outside
+the match. See the warning below about \1 vs $1 for details.)
+Referring back to another part of the match is called a
+I<backreference>.
+
+There is no limit to the number of captured substrings that you may
+use. However Perl also uses \10, \11, etc. as aliases for \010,
+\011, etc. (Recall that 0 means octal, so \011 is the 9'th ASCII
+character, a tab.) Perl resolves this ambiguity by interpreting
+\10 as a backreference only if at least 10 left parentheses have
+opened before it. Likewise \11 is a backreference only if at least
+11 left parentheses have opened before it. And so on. \1 through
+\9 are always interpreted as backreferences."
+
+Examples:
s/^([^ ]*) *([^ ]*)/$2 $1/; # swap first two words
- if (/Time: (..):(..):(..)/) {
+ if (/(.)\1/) { # find first doubled char
+ print "'$1' is the first doubled character\n";
+ }
+
+ if (/Time: (..):(..):(..)/) { # parse out values
$hours = $1;
$minutes = $2;
$seconds = $3;
}
-You will note that all backslashed metacharacters in Perl are
-alphanumeric, such as C<\b>, C<\w>, C<\n>. Unlike some other regular expression
-languages, there are no backslashed symbols that aren't alphanumeric.
-So anything that looks like \\, \(, \), \<, \>, \{, or \} is always
-interpreted as a literal character, not a metacharacter. This makes it
-simple to quote a string that you want to use for a pattern but that
-you are afraid might contain metacharacters. Simply quote all the
-non-alphanumeric characters:
+Several special variables also refer back to portions of the previous
+match. C<$+> returns whatever the last bracket match matched.
+C<$&> returns the entire matched string. (At one point C<$0> did
+also, but now it returns the name of the program.) C<$`> returns
+everything before the matched string. And C<$'> returns everything
+after the matched string.
+
+The numbered variables ($1, $2, $3, etc.) and the related punctuation
+set (C<$+>, C<$&>, C<$`>, and C<$'>) are all dynamically scoped
+until the end of the enclosing block or until the next successful
+match, whichever comes first. (See L<perlsyn/"Compound Statements">.)
+
+B<WARNING>: Once Perl sees that you need one of C<$&>, C<$`>, or
+C<$'> anywhere in the program, it has to provide them for every
+pattern match. This may substantially slow your program. Perl
+uses the same mechanism to produce $1, $2, etc, so you also pay a
+price for each pattern that contains capturing parentheses. (To
+avoid this cost while retaining the grouping behaviour, use the
+extended regular expression C<(?: ... )> instead.) But if you never
+use C<$&>, C<$`> or C<$'>, then patterns I<without> capturing
+parentheses will not be penalized. So avoid C<$&>, C<$'>, and C<$`>
+if you can, but if you can't (and some algorithms really appreciate
+them), once you've used them once, use them at will, because you've
+already paid the price. As of 5.005, C<$&> is not so costly as the
+other two.
+
+Backslashed metacharacters in Perl are alphanumeric, such as C<\b>,
+C<\w>, C<\n>. Unlike some other regular expression languages, there
+are no backslashed symbols that aren't alphanumeric. So anything
+that looks like \\, \(, \), \<, \>, \{, or \} is always
+interpreted as a literal character, not a metacharacter. This was
+once used in a common idiom to disable or quote the special meanings
+of regular expression metacharacters in a string that you want to
+use for a pattern. Simply quote all non-"word" characters:
$pattern =~ s/(\W)/\\$1/g;
-You can also use the built-in quotemeta() function to do this.
-An even easier way to quote metacharacters right in the match operator
-is to say
+(If C<use locale> is set, then this depends on the current locale.)
+Today it is more common to use the quotemeta() function or the C<\Q>
+metaquoting escape sequence to disable all metacharacters' special
+meanings like this:
/$unquoted\Q$quoted\E$unquoted/
-Perl 5 defines a consistent extension syntax for regular expressions.
-The syntax is a pair of parens with a question mark as the first thing
-within the parens (this was a syntax error in Perl 4). The character
-after the question mark gives the function of the extension. Several
-extensions are already supported:
+Beware that if you put literal backslashes (those not inside
+interpolated variables) between C<\Q> and C<\E>, double-quotish
+backslash interpolation may lead to confusing results. If you
+I<need> to use literal backslashes within C<\Q...\E>,
+consult L<perlop/"Gory details of parsing quoted constructs">.
+
+=head2 Extended Patterns
+
+Perl also defines a consistent extension syntax for features not
+found in standard tools like B<awk> and B<lex>. The syntax is a
+pair of parentheses with a question mark as the first thing within
+the parentheses. The character after the question mark indicates
+the extension.
+
+The stability of these extensions varies widely. Some have been
+part of the core language for many years. Others are experimental
+and may change without warning or be completely removed. Check
+the documentation on an individual feature to verify its current
+status.
+
+A question mark was chosen for this and for the minimal-matching
+construct because 1) question marks are rare in older regular
+expressions, and 2) whenever you see one, you should stop and
+"question" exactly what is going on. That's psychology...
=over 10
-=item (?#text)
+=item C<(?#text)>
+
+A comment. The text is ignored. If the C</x> modifier enables
+whitespace formatting, a simple C<#> will suffice. Note that Perl closes
+the comment as soon as it sees a C<)>, so there is no way to put a literal
+C<)> in the comment.
+
+=item C<(?imsx-imsx)>
+
+One or more embedded pattern-match modifiers. This is particularly
+useful for dynamic patterns, such as those read in from a configuration
+file, read in as an argument, are specified in a table somewhere,
+etc. Consider the case that some of which want to be case sensitive
+and some do not. The case insensitive ones need to include merely
+C<(?i)> at the front of the pattern. For example:
+
+ $pattern = "foobar";
+ if ( /$pattern/i ) { }
+
+ # more flexible:
+
+ $pattern = "(?i)foobar";
+ if ( /$pattern/ ) { }
+
+Letters after a C<-> turn those modifiers off. These modifiers are
+localized inside an enclosing group (if any). For example,
-A comment. The text is ignored.
+ ( (?i) blah ) \s+ \1
-=item (?:regexp)
+will match a repeated (I<including the case>!) word C<blah> in any
+case, assuming C<x> modifier, and no C<i> modifier outside this
+group.
-This groups things like "()" but doesn't make backrefences like "()" does. So
+=item C<(?:pattern)>
- split(/\b(?:a|b|c)\b/)
+=item C<(?imsx-imsx:pattern)>
+
+This is for clustering, not capturing; it groups subexpressions like
+"()", but doesn't make backreferences as "()" does. So
+
+ @fields = split(/\b(?:a|b|c)\b/)
is like
- split(/\b(a|b|c)\b/)
+ @fields = split(/\b(a|b|c)\b/)
+
+but doesn't spit out extra fields. It's also cheaper not to capture
+characters if you don't need to.
+
+Any letters between C<?> and C<:> act as flags modifiers as with
+C<(?imsx-imsx)>. For example,
-but doesn't spit out extra fields.
+ /(?s-i:more.*than).*million/i
-=item (?=regexp)
+is equivalent to the more verbose
-A zero-width positive lookahead assertion. For example, C</\w+(?=\t)/>
+ /(?:(?s-i)more.*than).*million/i
+
+=item C<(?=pattern)>
+
+A zero-width positive look-ahead assertion. For example, C</\w+(?=\t)/>
matches a word followed by a tab, without including the tab in C<$&>.
-=item (?!regexp)
+=item C<(?!pattern)>
-A zero-width negative lookahead assertion. For example C</foo(?!bar)/>
+A zero-width negative look-ahead assertion. For example C</foo(?!bar)/>
matches any occurrence of "foo" that isn't followed by "bar". Note
-however that lookahead and lookbehind are NOT the same thing. You cannot
-use this for lookbehind: C</(?!foo)bar/> will not find an occurrence of
-"bar" that is preceded by something which is not "foo". That's because
-the C<(?!foo)> is just saying that the next thing cannot be "foo"--and
-it's not, it's a "bar", so "foobar" will match. You would have to do
-something like C</(?foo)...bar/> for that. We say "like" because there's
-the case of your "bar" not having three characters before it. You could
-cover that this way: C</(?:(?!foo)...|^..?)bar/>. Sometimes it's still
-easier just to say:
+however that look-ahead and look-behind are NOT the same thing. You cannot
+use this for look-behind.
- if (/foo/ && $` =~ /bar$/)
+If you are looking for a "bar" that isn't preceded by a "foo", C</(?!foo)bar/>
+will not do what you want. That's because the C<(?!foo)> is just saying that
+the next thing cannot be "foo"--and it's not, it's a "bar", so "foobar" will
+match. You would have to do something like C</(?!foo)...bar/> for that. We
+say "like" because there's the case of your "bar" not having three characters
+before it. You could cover that this way: C</(?:(?!foo)...|^.{0,2})bar/>.
+Sometimes it's still easier just to say:
+ if (/bar/ && $` !~ /foo$/)
-=item (?imsx)
+For look-behind see below.
-One or more embedded pattern-match modifiers. This is particularly
-useful for patterns that are specified in a table somewhere, some of
-which want to be case sensitive, and some of which don't. The case
-insensitive ones merely need to include C<(?i)> at the front of the
-pattern. For example:
+=item C<(?<=pattern)>
- $pattern = "foobar";
- if ( /$pattern/i )
+A zero-width positive look-behind assertion. For example, C</(?<=\t)\w+/>
+matches a word that follows a tab, without including the tab in C<$&>.
+Works only for fixed-width look-behind.
- # more flexible:
+=item C<(?<!pattern)>
- $pattern = "(?i)foobar";
- if ( /$pattern/ )
+A zero-width negative look-behind assertion. For example C</(?<!bar)foo/>
+matches any occurrence of "foo" that does not follow "bar". Works
+only for fixed-width look-behind.
+
+=item C<(?{ code })>
+
+B<WARNING>: This extended regular expression feature is considered
+highly experimental, and may be changed or deleted without notice.
+
+This zero-width assertion evaluate any embedded Perl code. It
+always succeeds, and its C<code> is not interpolated. Currently,
+the rules to determine where the C<code> ends are somewhat convoluted.
+
+The C<code> is properly scoped in the following sense: If the assertion
+is backtracked (compare L<"Backtracking">), all changes introduced after
+C<local>ization are undone, so that
+
+ $_ = 'a' x 8;
+ m<
+ (?{ $cnt = 0 }) # Initialize $cnt.
+ (
+ a
+ (?{
+ local $cnt = $cnt + 1; # Update $cnt, backtracking-safe.
+ })
+ )*
+ aaaa
+ (?{ $res = $cnt }) # On success copy to non-localized
+ # location.
+ >x;
+
+will set C<$res = 4>. Note that after the match, $cnt returns to the globally
+introduced value, because the scopes that restrict C<local> operators
+are unwound.
+
+This assertion may be used as a C<(?(condition)yes-pattern|no-pattern)>
+switch. If I<not> used in this way, the result of evaluation of
+C<code> is put into the special variable C<$^R>. This happens
+immediately, so C<$^R> can be used from other C<(?{ code })> assertions
+inside the same regular expression.
+
+The assignment to C<$^R> above is properly localized, so the old
+value of C<$^R> is restored if the assertion is backtracked; compare
+L<"Backtracking">.
+
+For reasons of security, this construct is forbidden if the regular
+expression involves run-time interpolation of variables, unless the
+perilous C<use re 'eval'> pragma has been used (see L<re>), or the
+variables contain results of C<qr//> operator (see
+L<perlop/"qr/STRING/imosx">).
+
+This restriction is because of the wide-spread and remarkably convenient
+custom of using run-time determined strings as patterns. For example:
+
+ $re = <>;
+ chomp $re;
+ $string =~ /$re/;
+
+Before Perl knew how to execute interpolated code within a pattern,
+this operation was completely safe from a security point of view,
+although it could raise an exception from an illegal pattern. If
+you turn on the C<use re 'eval'>, though, it is no longer secure,
+so you should only do so if you are also using taint checking.
+Better yet, use the carefully constrained evaluation within a Safe
+module. See L<perlsec> for details about both these mechanisms.
+
+=item C<(??{ code })>
+
+B<WARNING>: This extended regular expression feature is considered
+highly experimental, and may be changed or deleted without notice.
+A simplified version of the syntax may be introduced for commonly
+used idioms.
+
+This is a "postponed" regular subexpression. The C<code> is evaluated
+at run time, at the moment this subexpression may match. The result
+of evaluation is considered as a regular expression and matched as
+if it were inserted instead of this construct.
+
+The C<code> is not interpolated. As before, the rules to determine
+where the C<code> ends are currently somewhat convoluted.
+
+The following pattern matches a parenthesized group:
+
+ $re = qr{
+ \(
+ (?:
+ (?> [^()]+ ) # Non-parens without backtracking
+ |
+ (??{ $re }) # Group with matching parens
+ )*
+ \)
+ }x;
+
+=item C<< (?>pattern) >>
+
+B<WARNING>: This extended regular expression feature is considered
+highly experimental, and may be changed or deleted without notice.
+
+An "independent" subexpression, one which matches the substring
+that a I<standalone> C<pattern> would match if anchored at the given
+position, and it matches I<nothing other than this substring>. This
+construct is useful for optimizations of what would otherwise be
+"eternal" matches, because it will not backtrack (see L<"Backtracking">).
+It may also be useful in places where the "grab all you can, and do not
+give anything back" semantic is desirable.
+
+For example: C<< ^(?>a*)ab >> will never match, since C<< (?>a*) >>
+(anchored at the beginning of string, as above) will match I<all>
+characters C<a> at the beginning of string, leaving no C<a> for
+C<ab> to match. In contrast, C<a*ab> will match the same as C<a+b>,
+since the match of the subgroup C<a*> is influenced by the following
+group C<ab> (see L<"Backtracking">). In particular, C<a*> inside
+C<a*ab> will match fewer characters than a standalone C<a*>, since
+this makes the tail match.
+
+An effect similar to C<< (?>pattern) >> may be achieved by writing
+C<(?=(pattern))\1>. This matches the same substring as a standalone
+C<a+>, and the following C<\1> eats the matched string; it therefore
+makes a zero-length assertion into an analogue of C<< (?>...) >>.
+(The difference between these two constructs is that the second one
+uses a capturing group, thus shifting ordinals of backreferences
+in the rest of a regular expression.)
+
+Consider this pattern:
+
+ m{ \(
+ (
+ [^()]+ # x+
+ |
+ \( [^()]* \)
+ )+
+ \)
+ }x
+
+That will efficiently match a nonempty group with matching parentheses
+two levels deep or less. However, if there is no such group, it
+will take virtually forever on a long string. That's because there
+are so many different ways to split a long string into several
+substrings. This is what C<(.+)+> is doing, and C<(.+)+> is similar
+to a subpattern of the above pattern. Consider how the pattern
+above detects no-match on C<((()aaaaaaaaaaaaaaaaaa> in several
+seconds, but that each extra letter doubles this time. This
+exponential performance will make it appear that your program has
+hung. However, a tiny change to this pattern
+
+ m{ \(
+ (
+ (?> [^()]+ ) # change x+ above to (?> x+ )
+ |
+ \( [^()]* \)
+ )+
+ \)
+ }x
+
+which uses C<< (?>...) >> matches exactly when the one above does (verifying
+this yourself would be a productive exercise), but finishes in a fourth
+the time when used on a similar string with 1000000 C<a>s. Be aware,
+however, that this pattern currently triggers a warning message under
+the C<use warnings> pragma or B<-w> switch saying it
+C<"matches the null string many times">):
+
+On simple groups, such as the pattern C<< (?> [^()]+ ) >>, a comparable
+effect may be achieved by negative look-ahead, as in C<[^()]+ (?! [^()] )>.
+This was only 4 times slower on a string with 1000000 C<a>s.
+
+The "grab all you can, and do not give anything back" semantic is desirable
+in many situations where on the first sight a simple C<()*> looks like
+the correct solution. Suppose we parse text with comments being delimited
+by C<#> followed by some optional (horizontal) whitespace. Contrary to
+its appearance, C<#[ \t]*> I<is not> the correct subexpression to match
+the comment delimiter, because it may "give up" some whitespace if
+the remainder of the pattern can be made to match that way. The correct
+answer is either one of these:
+
+ (?>#[ \t]*)
+ #[ \t]*(?![ \t])
+
+For example, to grab non-empty comments into $1, one should use either
+one of these:
+
+ / (?> \# [ \t]* ) ( .+ ) /x;
+ / \# [ \t]* ( [^ \t] .* ) /x;
+
+Which one you pick depends on which of these expressions better reflects
+the above specification of comments.
+
+=item C<(?(condition)yes-pattern|no-pattern)>
+
+=item C<(?(condition)yes-pattern)>
+
+B<WARNING>: This extended regular expression feature is considered
+highly experimental, and may be changed or deleted without notice.
+
+Conditional expression. C<(condition)> should be either an integer in
+parentheses (which is valid if the corresponding pair of parentheses
+matched), or look-ahead/look-behind/evaluate zero-width assertion.
+
+For example:
+
+ m{ ( \( )?
+ [^()]+
+ (?(1) \) )
+ }x
+
+matches a chunk of non-parentheses, possibly included in parentheses
+themselves.
=back
-The specific choice of question mark for this and the new minimal
-matching construct was because 1) question mark is pretty rare in older
-regular expressions, and 2) whenever you see one, you should stop
-and "question" exactly what is going on. That's psychology...
+=head2 Backtracking
+
+NOTE: This section presents an abstract approximation of regular
+expression behavior. For a more rigorous (and complicated) view of
+the rules involved in selecting a match among possible alternatives,
+see L<Combining pieces together>.
+
+A fundamental feature of regular expression matching involves the
+notion called I<backtracking>, which is currently used (when needed)
+by all regular expression quantifiers, namely C<*>, C<*?>, C<+>,
+C<+?>, C<{n,m}>, and C<{n,m}?>. Backtracking is often optimized
+internally, but the general principle outlined here is valid.
+
+For a regular expression to match, the I<entire> regular expression must
+match, not just part of it. So if the beginning of a pattern containing a
+quantifier succeeds in a way that causes later parts in the pattern to
+fail, the matching engine backs up and recalculates the beginning
+part--that's why it's called backtracking.
+
+Here is an example of backtracking: Let's say you want to find the
+word following "foo" in the string "Food is on the foo table.":
+
+ $_ = "Food is on the foo table.";
+ if ( /\b(foo)\s+(\w+)/i ) {
+ print "$2 follows $1.\n";
+ }
+
+When the match runs, the first part of the regular expression (C<\b(foo)>)
+finds a possible match right at the beginning of the string, and loads up
+$1 with "Foo". However, as soon as the matching engine sees that there's
+no whitespace following the "Foo" that it had saved in $1, it realizes its
+mistake and starts over again one character after where it had the
+tentative match. This time it goes all the way until the next occurrence
+of "foo". The complete regular expression matches this time, and you get
+the expected output of "table follows foo."
+
+Sometimes minimal matching can help a lot. Imagine you'd like to match
+everything between "foo" and "bar". Initially, you write something
+like this:
+
+ $_ = "The food is under the bar in the barn.";
+ if ( /foo(.*)bar/ ) {
+ print "got <$1>\n";
+ }
+
+Which perhaps unexpectedly yields:
+
+ got <d is under the bar in the >
+
+That's because C<.*> was greedy, so you get everything between the
+I<first> "foo" and the I<last> "bar". Here it's more effective
+to use minimal matching to make sure you get the text between a "foo"
+and the first "bar" thereafter.
+
+ if ( /foo(.*?)bar/ ) { print "got <$1>\n" }
+ got <d is under the >
+
+Here's another example: let's say you'd like to match a number at the end
+of a string, and you also want to keep the preceding part the match.
+So you write this:
+
+ $_ = "I have 2 numbers: 53147";
+ if ( /(.*)(\d*)/ ) { # Wrong!
+ print "Beginning is <$1>, number is <$2>.\n";
+ }
+
+That won't work at all, because C<.*> was greedy and gobbled up the
+whole string. As C<\d*> can match on an empty string the complete
+regular expression matched successfully.
+
+ Beginning is <I have 2 numbers: 53147>, number is <>.
+
+Here are some variants, most of which don't work:
+
+ $_ = "I have 2 numbers: 53147";
+ @pats = qw{
+ (.*)(\d*)
+ (.*)(\d+)
+ (.*?)(\d*)
+ (.*?)(\d+)
+ (.*)(\d+)$
+ (.*?)(\d+)$
+ (.*)\b(\d+)$
+ (.*\D)(\d+)$
+ };
+
+ for $pat (@pats) {
+ printf "%-12s ", $pat;
+ if ( /$pat/ ) {
+ print "<$1> <$2>\n";
+ } else {
+ print "FAIL\n";
+ }
+ }
+
+That will print out:
+
+ (.*)(\d*) <I have 2 numbers: 53147> <>
+ (.*)(\d+) <I have 2 numbers: 5314> <7>
+ (.*?)(\d*) <> <>
+ (.*?)(\d+) <I have > <2>
+ (.*)(\d+)$ <I have 2 numbers: 5314> <7>
+ (.*?)(\d+)$ <I have 2 numbers: > <53147>
+ (.*)\b(\d+)$ <I have 2 numbers: > <53147>
+ (.*\D)(\d+)$ <I have 2 numbers: > <53147>
+
+As you see, this can be a bit tricky. It's important to realize that a
+regular expression is merely a set of assertions that gives a definition
+of success. There may be 0, 1, or several different ways that the
+definition might succeed against a particular string. And if there are
+multiple ways it might succeed, you need to understand backtracking to
+know which variety of success you will achieve.
+
+When using look-ahead assertions and negations, this can all get even
+tricker. Imagine you'd like to find a sequence of non-digits not
+followed by "123". You might try to write that as
+
+ $_ = "ABC123";
+ if ( /^\D*(?!123)/ ) { # Wrong!
+ print "Yup, no 123 in $_\n";
+ }
+
+But that isn't going to match; at least, not the way you're hoping. It
+claims that there is no 123 in the string. Here's a clearer picture of
+why it that pattern matches, contrary to popular expectations:
+
+ $x = 'ABC123' ;
+ $y = 'ABC445' ;
+
+ print "1: got $1\n" if $x =~ /^(ABC)(?!123)/ ;
+ print "2: got $1\n" if $y =~ /^(ABC)(?!123)/ ;
+
+ print "3: got $1\n" if $x =~ /^(\D*)(?!123)/ ;
+ print "4: got $1\n" if $y =~ /^(\D*)(?!123)/ ;
+
+This prints
+
+ 2: got ABC
+ 3: got AB
+ 4: got ABC
+
+You might have expected test 3 to fail because it seems to a more
+general purpose version of test 1. The important difference between
+them is that test 3 contains a quantifier (C<\D*>) and so can use
+backtracking, whereas test 1 will not. What's happening is
+that you've asked "Is it true that at the start of $x, following 0 or more
+non-digits, you have something that's not 123?" If the pattern matcher had
+let C<\D*> expand to "ABC", this would have caused the whole pattern to
+fail.
+
+The search engine will initially match C<\D*> with "ABC". Then it will
+try to match C<(?!123> with "123", which fails. But because
+a quantifier (C<\D*>) has been used in the regular expression, the
+search engine can backtrack and retry the match differently
+in the hope of matching the complete regular expression.
+
+The pattern really, I<really> wants to succeed, so it uses the
+standard pattern back-off-and-retry and lets C<\D*> expand to just "AB" this
+time. Now there's indeed something following "AB" that is not
+"123". It's "C123", which suffices.
+
+We can deal with this by using both an assertion and a negation.
+We'll say that the first part in $1 must be followed both by a digit
+and by something that's not "123". Remember that the look-aheads
+are zero-width expressions--they only look, but don't consume any
+of the string in their match. So rewriting this way produces what
+you'd expect; that is, case 5 will fail, but case 6 succeeds:
+
+ print "5: got $1\n" if $x =~ /^(\D*)(?=\d)(?!123)/ ;
+ print "6: got $1\n" if $y =~ /^(\D*)(?=\d)(?!123)/ ;
+
+ 6: got ABC
+
+In other words, the two zero-width assertions next to each other work as though
+they're ANDed together, just as you'd use any built-in assertions: C</^$/>
+matches only if you're at the beginning of the line AND the end of the
+line simultaneously. The deeper underlying truth is that juxtaposition in
+regular expressions always means AND, except when you write an explicit OR
+using the vertical bar. C</ab/> means match "a" AND (then) match "b",
+although the attempted matches are made at different positions because "a"
+is not a zero-width assertion, but a one-width assertion.
+
+B<WARNING>: particularly complicated regular expressions can take
+exponential time to solve because of the immense number of possible
+ways they can use backtracking to try match. For example, without
+internal optimizations done by the regular expression engine, this will
+take a painfully long time to run:
+
+ 'aaaaaaaaaaaa' =~ /((a{0,5}){0,5}){0,5}[c]/
+
+And if you used C<*>'s instead of limiting it to 0 through 5 matches,
+then it would take forever--or until you ran out of stack space.
+
+A powerful tool for optimizing such beasts is what is known as an
+"independent group",
+which does not backtrack (see L<C<< (?>pattern) >>>). Note also that
+zero-length look-ahead/look-behind assertions will not backtrack to make
+the tail match, since they are in "logical" context: only
+whether they match is considered relevant. For an example
+where side-effects of look-ahead I<might> have influenced the
+following match, see L<C<< (?>pattern) >>>.
=head2 Version 8 Regular Expressions
-In case you're not familiar with the "regular" Version 8 regexp
+In case you're not familiar with the "regular" Version 8 regex
routines, here are the pattern-matching rules not described above.
Any single character matches itself, unless it is a I<metacharacter>
with a special meaning described here or above. You can cause
-characters which normally function as metacharacters to be interpreted
-literally by prefixing them with a "\" (e.g. "\." matches a ".", not any
+characters that normally function as metacharacters to be interpreted
+literally by prefixing them with a "\" (e.g., "\." matches a ".", not any
character; "\\" matches a "\"). A series of characters matches that
series of characters in the target string, so the pattern C<blurfl>
would match "blurfl" in the target string.
You can specify a character class, by enclosing a list of characters
-in C<[]>, which will match any one of the characters in the list. If the
+in C<[]>, which will match any one character from the list. If the
first character after the "[" is "^", the class matches any character not
-in the list. Within a list, the "-" character is used to specify a
-range, so that C<a-z> represents all the characters between "a" and "z",
-inclusive.
+in the list. Within a list, the "-" character specifies a
+range, so that C<a-z> represents all characters between "a" and "z",
+inclusive. If you want either "-" or "]" itself to be a member of a
+class, put it at the start of the list (possibly after a "^"), or
+escape it with a backslash. "-" is also taken literally when it is
+at the end of the list, just before the closing "]". (The
+following all specify the same class of three characters: C<[-az]>,
+C<[az-]>, and C<[a\-z]>. All are different from C<[a-z]>, which
+specifies a class containing twenty-six characters.)
+Also, if you try to use the character classes C<\w>, C<\W>, C<\s>,
+C<\S>, C<\d>, or C<\D> as endpoints of a range, that's not a range,
+the "-" is understood literally.
+
+Note also that the whole range idea is rather unportable between
+character sets--and even within character sets they may cause results
+you probably didn't expect. A sound principle is to use only ranges
+that begin from and end at either alphabets of equal case ([a-e],
+[A-E]), or digits ([0-9]). Anything else is unsafe. If in doubt,
+spell out the character sets in full.
Characters may be specified using a metacharacter syntax much like that
used in C: "\n" matches a newline, "\t" a tab, "\r" a carriage return,
"\f" a form feed, etc. More generally, \I<nnn>, where I<nnn> is a string
of octal digits, matches the character whose ASCII value is I<nnn>.
-Similarly, \xI<nn>, where I<nn> are hexidecimal digits, matches the
+Similarly, \xI<nn>, where I<nn> are hexadecimal digits, matches the
character whose ASCII value is I<nn>. The expression \cI<x> matches the
ASCII character control-I<x>. Finally, the "." metacharacter matches any
character except "\n" (unless you use C</s>).
You can specify a series of alternatives for a pattern using "|" to
separate them, so that C<fee|fie|foe> will match any of "fee", "fie",
-or "foe" in the target string (as would C<f(e|i|o)e>). Note that the
+or "foe" in the target string (as would C<f(e|i|o)e>). The
first alternative includes everything from the last pattern delimiter
("(", "[", or the beginning of the pattern) up to the first "|", and
the last alternative contains everything from the last "|" to the next
-pattern delimiter. For this reason, it's common practice to include
-alternatives in parentheses, to minimize confusion about where they
-start and end. Note however that "|" is interpreted as a literal with
-square brackets, so if you write C<[fee|fie|foe]> you're really only
-matching C<[feio|]>.
-
-Within a pattern, you may designate subpatterns for later reference by
-enclosing them in parentheses, and you may refer back to the I<n>th
-subpattern later in the pattern using the metacharacter \I<n>.
-Subpatterns are numbered based on the left to right order of their
-opening parenthesis. Note that a backreference matches whatever
-actually matched the subpattern in the string being examined, not the
-rules for that subpattern. Therefore, C<(0|0x)\d*\s\1\d*> will
-match "0x1234 0x4321",but not "0x1234 01234", since subpattern 1
-actually matched "0x", even though the rule C<0|0x> could
-potentially match the leading 0 in the second number.
+pattern delimiter. That's why it's common practice to include
+alternatives in parentheses: to minimize confusion about where they
+start and end.
+
+Alternatives are tried from left to right, so the first
+alternative found for which the entire expression matches, is the one that
+is chosen. This means that alternatives are not necessarily greedy. For
+example: when matching C<foo|foot> against "barefoot", only the "foo"
+part will match, as that is the first alternative tried, and it successfully
+matches the target string. (This might not seem important, but it is
+important when you are capturing matched text using parentheses.)
+
+Also remember that "|" is interpreted as a literal within square brackets,
+so if you write C<[fee|fie|foe]> you're really only matching C<[feio|]>.
+
+Within a pattern, you may designate subpatterns for later reference
+by enclosing them in parentheses, and you may refer back to the
+I<n>th subpattern later in the pattern using the metacharacter
+\I<n>. Subpatterns are numbered based on the left to right order
+of their opening parenthesis. A backreference matches whatever
+actually matched the subpattern in the string being examined, not
+the rules for that subpattern. Therefore, C<(0|0x)\d*\s\1\d*> will
+match "0x1234 0x4321", but not "0x1234 01234", because subpattern
+1 matched "0x", even though the rule C<0|0x> could potentially match
+the leading 0 in the second number.
+
+=head2 Warning on \1 vs $1
+
+Some people get too used to writing things like:
+
+ $pattern =~ s/(\W)/\\\1/g;
+
+This is grandfathered for the RHS of a substitute to avoid shocking the
+B<sed> addicts, but it's a dirty habit to get into. That's because in
+PerlThink, the righthand side of a C<s///> is a double-quoted string. C<\1> in
+the usual double-quoted string means a control-A. The customary Unix
+meaning of C<\1> is kludged in for C<s///>. However, if you get into the habit
+of doing that, you get yourself into trouble if you then add an C</e>
+modifier.
+
+ s/(\d+)/ \1 + 1 /eg; # causes warning under -w
+
+Or if you try to do
+
+ s/(\d+)/\1000/;
+
+You can't disambiguate that by saying C<\{1}000>, whereas you can fix it with
+C<${1}000>. The operation of interpolation should not be confused
+with the operation of matching a backreference. Certainly they mean two
+different things on the I<left> side of the C<s///>.
+
+=head2 Repeated patterns matching zero-length substring
+
+B<WARNING>: Difficult material (and prose) ahead. This section needs a rewrite.
+
+Regular expressions provide a terse and powerful programming language. As
+with most other power tools, power comes together with the ability
+to wreak havoc.
+
+A common abuse of this power stems from the ability to make infinite
+loops using regular expressions, with something as innocuous as:
+
+ 'foo' =~ m{ ( o? )* }x;
+
+The C<o?> can match at the beginning of C<'foo'>, and since the position
+in the string is not moved by the match, C<o?> would match again and again
+because of the C<*> modifier. Another common way to create a similar cycle
+is with the looping modifier C<//g>:
+
+ @matches = ( 'foo' =~ m{ o? }xg );
+
+or
+
+ print "match: <$&>\n" while 'foo' =~ m{ o? }xg;
+
+or the loop implied by split().
+
+However, long experience has shown that many programming tasks may
+be significantly simplified by using repeated subexpressions that
+may match zero-length substrings. Here's a simple example being:
+
+ @chars = split //, $string; # // is not magic in split
+ ($whitewashed = $string) =~ s/()/ /g; # parens avoid magic s// /
+
+Thus Perl allows such constructs, by I<forcefully breaking
+the infinite loop>. The rules for this are different for lower-level
+loops given by the greedy modifiers C<*+{}>, and for higher-level
+ones like the C</g> modifier or split() operator.
+
+The lower-level loops are I<interrupted> (that is, the loop is
+broken) when Perl detects that a repeated expression matched a
+zero-length substring. Thus
+
+ m{ (?: NON_ZERO_LENGTH | ZERO_LENGTH )* }x;
+
+is made equivalent to
+
+ m{ (?: NON_ZERO_LENGTH )*
+ |
+ (?: ZERO_LENGTH )?
+ }x;
+
+The higher level-loops preserve an additional state between iterations:
+whether the last match was zero-length. To break the loop, the following
+match after a zero-length match is prohibited to have a length of zero.
+This prohibition interacts with backtracking (see L<"Backtracking">),
+and so the I<second best> match is chosen if the I<best> match is of
+zero length.
+
+For example:
+
+ $_ = 'bar';
+ s/\w??/<$&>/g;
+
+results in C<"<><b><><a><><r><>">. At each position of the string the best
+match given by non-greedy C<??> is the zero-length match, and the I<second
+best> match is what is matched by C<\w>. Thus zero-length matches
+alternate with one-character-long matches.
+
+Similarly, for repeated C<m/()/g> the second-best match is the match at the
+position one notch further in the string.
+
+The additional state of being I<matched with zero-length> is associated with
+the matched string, and is reset by each assignment to pos().
+Zero-length matches at the end of the previous match are ignored
+during C<split>.
+
+=head2 Combining pieces together
+
+Each of the elementary pieces of regular expressions which were described
+before (such as C<ab> or C<\Z>) could match at most one substring
+at the given position of the input string. However, in a typical regular
+expression these elementary pieces are combined into more complicated
+patterns using combining operators C<ST>, C<S|T>, C<S*> etc
+(in these examples C<S> and C<T> are regular subexpressions).
+
+Such combinations can include alternatives, leading to a problem of choice:
+if we match a regular expression C<a|ab> against C<"abc">, will it match
+substring C<"a"> or C<"ab">? One way to describe which substring is
+actually matched is the concept of backtracking (see L<"Backtracking">).
+However, this description is too low-level and makes you think
+in terms of a particular implementation.
+
+Another description starts with notions of "better"/"worse". All the
+substrings which may be matched by the given regular expression can be
+sorted from the "best" match to the "worst" match, and it is the "best"
+match which is chosen. This substitutes the question of "what is chosen?"
+by the question of "which matches are better, and which are worse?".
+
+Again, for elementary pieces there is no such question, since at most
+one match at a given position is possible. This section describes the
+notion of better/worse for combining operators. In the description
+below C<S> and C<T> are regular subexpressions.
+
+=over
+
+=item C<ST>
+
+Consider two possible matches, C<AB> and C<A'B'>, C<A> and C<A'> are
+substrings which can be matched by C<S>, C<B> and C<B'> are substrings
+which can be matched by C<T>.
+
+If C<A> is better match for C<S> than C<A'>, C<AB> is a better
+match than C<A'B'>.
+
+If C<A> and C<A'> coincide: C<AB> is a better match than C<AB'> if
+C<B> is better match for C<T> than C<B'>.
+
+=item C<S|T>
+
+When C<S> can match, it is a better match than when only C<T> can match.
+
+Ordering of two matches for C<S> is the same as for C<S>. Similar for
+two matches for C<T>.
+
+=item C<S{REPEAT_COUNT}>
+
+Matches as C<SSS...S> (repeated as many times as necessary).
+
+=item C<S{min,max}>
+
+Matches as C<S{max}|S{max-1}|...|S{min+1}|S{min}>.
+
+=item C<S{min,max}?>
+
+Matches as C<S{min}|S{min+1}|...|S{max-1}|S{max}>.
+
+=item C<S?>, C<S*>, C<S+>
+
+Same as C<S{0,1}>, C<S{0,BIG_NUMBER}>, C<S{1,BIG_NUMBER}> respectively.
+
+=item C<S??>, C<S*?>, C<S+?>
+
+Same as C<S{0,1}?>, C<S{0,BIG_NUMBER}?>, C<S{1,BIG_NUMBER}?> respectively.
+
+=item C<< (?>S) >>
+
+Matches the best match for C<S> and only that.
+
+=item C<(?=S)>, C<(?<=S)>
+
+Only the best match for C<S> is considered. (This is important only if
+C<S> has capturing parentheses, and backreferences are used somewhere
+else in the whole regular expression.)
+
+=item C<(?!S)>, C<(?<!S)>
+
+For this grouping operator there is no need to describe the ordering, since
+only whether or not C<S> can match is important.
+
+=item C<(??{ EXPR })>
+
+The ordering is the same as for the regular expression which is
+the result of EXPR.
+
+=item C<(?(condition)yes-pattern|no-pattern)>
+
+Recall that which of C<yes-pattern> or C<no-pattern> actually matches is
+already determined. The ordering of the matches is the same as for the
+chosen subexpression.
+
+=back
+
+The above recipes describe the ordering of matches I<at a given position>.
+One more rule is needed to understand how a match is determined for the
+whole regular expression: a match at an earlier position is always better
+than a match at a later position.
+
+=head2 Creating custom RE engines
+
+Overloaded constants (see L<overload>) provide a simple way to extend
+the functionality of the RE engine.
+
+Suppose that we want to enable a new RE escape-sequence C<\Y|> which
+matches at boundary between white-space characters and non-whitespace
+characters. Note that C<(?=\S)(?<!\S)|(?!\S)(?<=\S)> matches exactly
+at these positions, so we want to have each C<\Y|> in the place of the
+more complicated version. We can create a module C<customre> to do
+this:
+
+ package customre;
+ use overload;
+
+ sub import {
+ shift;
+ die "No argument to customre::import allowed" if @_;
+ overload::constant 'qr' => \&convert;
+ }
+
+ sub invalid { die "/$_[0]/: invalid escape '\\$_[1]'"}
+
+ my %rules = ( '\\' => '\\',
+ 'Y|' => qr/(?=\S)(?<!\S)|(?!\S)(?<=\S)/ );
+ sub convert {
+ my $re = shift;
+ $re =~ s{
+ \\ ( \\ | Y . )
+ }
+ { $rules{$1} or invalid($re,$1) }sgex;
+ return $re;
+ }
+
+Now C<use customre> enables the new escape in constant regular
+expressions, i.e., those without any runtime variable interpolations.
+As documented in L<overload>, this conversion will work only over
+literal parts of regular expressions. For C<\Y|$re\Y|> the variable
+part of this regular expression needs to be converted explicitly
+(but only if the special meaning of C<\Y|> should be enabled inside $re):
+
+ use customre;
+ $re = <>;
+ chomp $re;
+ $re = customre::convert $re;
+ /\Y|$re\Y|/;
+
+=head1 BUGS
+
+This document varies from difficult to understand to completely
+and utterly opaque. The wandering prose riddled with jargon is
+hard to fathom in several places.
+
+This document needs a rewrite that separates the tutorial content
+from the reference content.
+
+=head1 SEE ALSO
+
+L<perlop/"Regexp Quote-Like Operators">.
+
+L<perlop/"Gory details of parsing quoted constructs">.
+
+L<perlfaq6>.
+
+L<perlfunc/pos>.
+
+L<perllocale>.
+
+I<Mastering Regular Expressions> by Jeffrey Friedl, published
+by O'Reilly and Associates.