Unix does the same thing on ttys in canonical mode. C<\015\012>
is commonly referred to as CRLF.
+A common cause of unportable programs is the misuse of chop() to trim
+newlines:
+
+ # XXX UNPORTABLE!
+ while(<FILE>) {
+ chop;
+ @array = split(/:/);
+ #...
+ }
+
+You can get away with this on Unix and MacOS (they have a single
+character end-of-line), but the same program will break under DOSish
+perls because you're only chop()ing half the end-of-line. Instead,
+chomp() should be used to trim newlines. The Dunce::Files module can
+help audit your code for misuses of chop().
+
+When dealing with binary files (or text files in binary mode) be sure
+to explicitly set $/ to the appropriate value for your file format
+before using chomp().
+
Because of the "text" mode translation, DOSish perls have limitations
in using C<seek> and C<tell> on a file accessed in "text" mode.
Stick to C<seek>-ing to locations you got from C<tell> (and no
Conflicting storage orders make utter mess out of the numbers. If a
little-endian host (Intel, VAX) stores 0x12345678 (305419896 in
-decimal), a big-endian host (Motorola, MIPS, Sparc, PA) reads it as
-0x78563412 (2018915346 in decimal). To avoid this problem in network
-(socket) connections use the C<pack> and C<unpack> formats C<n>
-and C<N>, the "network" orders. These are guaranteed to be portable.
+decimal), a big-endian host (Motorola, Sparc, PA) reads it as
+0x78563412 (2018915346 in decimal). Alpha and MIPS can be either:
+Digital/Compaq used/uses them in little-endian mode; SGI/Cray uses
+them in big-endian mode. To avoid this problem in network (socket)
+connections use the C<pack> and C<unpack> formats C<n> and C<N>, the
+"network" orders. These are guaranteed to be portable.
You can explore the endianness of your platform by unpacking a
data structure packed in native format such as:
either of the variables set like so:
$is_big_endian = unpack("h*", pack("s", 1)) =~ /01/;
- $is_litte_endian = unpack("h*", pack("s", 1)) =~ /^1/;
+ $is_little_endian = unpack("h*", pack("s", 1)) =~ /^1/;
Differing widths can cause truncation even between platforms of equal
endianness. The platform of shorter width loses the upper parts of the
One can circumnavigate both these problems in two ways. Either
transfer and store numbers always in text format, instead of raw
binary, or else consider using modules like Data::Dumper (included in
-the standard distribution as of Perl 5.005) and Storable. Keeping
-all data as text significantly simplifies matters.
+the standard distribution as of Perl 5.005) and Storable (included as
+of perl 5.8). Keeping all data as text significantly simplifies matters.
=head2 Files and Filesystems
notion of a "path" to uniquely identify a file on the system. How
that path is really written, though, differs considerably.
-Atlhough similar, file path specifications differ between Unix,
+Although similar, file path specifications differ between Unix,
Windows, S<Mac OS>, OS/2, VMS, VOS, S<RISC OS>, and probably others.
Unix, for example, is one of the few OSes that has the elegant idea
of a single root directory.
Don't count on a specific environment variable existing in C<%ENV>.
Don't count on C<%ENV> entries being case-sensitive, or even
-case-preserving.
+case-preserving. Don't try to clear %ENV by saying C<%ENV = ();>, or,
+if you really have to, make it conditional on C<$^O ne 'VMS'> since in
+VMS the C<%ENV> table is much more than a per-process key-value string
+table.
Don't count on signals or C<%SIG> for anything.
most platforms (though many of them do not support any type of
forking). The problem with using them arises from what you invoke
them on. External tools are often named differently on different
-platforms, may not be available in the same location, migth accept
+platforms, may not be available in the same location, might accept
different arguments, can behave differently, and often present their
results in a platform-dependent way. Thus, you should seldom depend
on them to produce consistent results. (Then again, if you're calling
=item Mailing list: cpan-testers@perl.org
-=item Testing results: C<http://testers.cpan.org/>
+=item Testing results: http://testers.cpan.org/
=back
Windows NT MSWin32 MSWin32-ppc
Cygwin cygwin
+The various MSWin32 Perl's can distinguish the OS they are running on
+via the value of the fifth element of the list returned from
+Win32::GetOSVersion(). For example:
+
+ if ($^O eq 'MSWin32') {
+ my @os_version_info = Win32::GetOSVersion();
+ print +('3.1','95','NT')[$os_version_info[4]],"\n";
+ }
+
Also see:
=over 4
-=item The djgpp environment for DOS, C<http://www.delorie.com/djgpp/>
+=item *
+
+The djgpp environment for DOS, http://www.delorie.com/djgpp/
+and L<perldos>.
+
+=item *
+
+The EMX environment for DOS, OS/2, etc. emx@iaehv.nl,
+http://www.leo.org/pub/comp/os/os2/leo/gnu/emx+gcc/index.html or
+ftp://hobbes.nmsu.edu/pub/os2/dev/emx. Also L<perlos2>.
+
+=item *
+
+Build instructions for Win32 in L<perlwin32>, or under the Cygnus environment
+in L<perlcygwin>.
+
+=item *
+
+The C<Win32::*> modules in L<Win32>.
-=item The EMX environment for DOS, OS/2, etc. C<emx@iaehv.nl>,
-C<http://www.leo.org/pub/comp/os/os2/leo/gnu/emx+gcc/index.html> or
-C<ftp://hobbes.nmsu.edu/pub/os2/dev/emx>
+=item *
-=item Build instructions for Win32, L<perlwin32>.
+The ActiveState Pages, http://www.activestate.com/
-=item The ActiveState Pages, C<http://www.activestate.com/>
+=item *
-=item The Cygwin environment for Win32; F<README.cygwin> (installed
-as L<perlcygwin>), C<http://sourceware.cygnus.com/cygwin/>
+The Cygwin environment for Win32; F<README.cygwin> (installed
+as L<perlcygwin>), http://www.cygwin.com/
-=item The U/WIN environment for Win32,
-C<http://www.research.att.com/sw/tools/uwin/>
+=item *
+The U/WIN environment for Win32,
+http://www.research.att.com/sw/tools/uwin/
+
+=item *
+
+Build instructions for OS/2, L<perlos2>
=back
=over 4
-=item The MacPerl Pages, C<http://www.macperl.com/>.
+=item *
+
+The MacPerl Pages, http://www.macperl.com/ .
+
+=item *
-=item The MacPerl mailing lists, C<http://www.macperl.org/>.
+The MacPerl mailing lists, http://www.macperl.org/ .
-=item MacPerl Module Porters, C<http://pudge.net/mmp/>.
+=item *
+
+MacPerl Module Porters, http://pudge.net/mmp/ .
=back
=head2 VMS
-Perl on VMS is discussed in F<vms/perlvms.pod> in the perl distribution.
+Perl on VMS is discussed in L<perlvms> in the perl distribution.
Perl on VMS can accept either VMS- or Unix-style file
specifications as in either of the following:
non-VMS platforms and can be helpful for conversions to and from RMS
native formats.
-What C<\n> represents depends on the type of file opened. It could
-be C<\015>, C<\012>, C<\015\012>, or nothing. The VMS::Stdio module
-provides access to the special fopen() requirements of files with unusual
-attributes on VMS.
+What C<\n> represents depends on the type of file opened. It usually
+represents C<\012> but it could also be C<\015>, C<\012>, C<\015\012>,
+C<\000>, C<\040>, or nothing depending on the file organiztion and
+record format. The VMS::Stdio module provides access to the
+special fopen() requirements of files with unusual attributes on VMS.
TCP/IP stacks are optional on VMS, so socket routines might not be
implemented. UDP sockets may not be supported.
=over 4
-=item F<README.vms> (installed as L<README_vms>), L<perlvms>
+=item *
+
+F<README.vms> (installed as L<README_vms>), L<perlvms>
+
+=item *
-=item vmsperl list, C<majordomo@perl.org>
+vmsperl list, majordomo@perl.org
-Put the words C<subscribe vmsperl> in message body.
+(Put the words C<subscribe vmsperl> in message body.)
-=item vmsperl on the web, C<http://www.sidhe.org/vmsperl/index.html>
+=item *
+
+vmsperl on the web, http://www.sidhe.org/vmsperl/index.html
=back
=head2 VOS
-Perl on VOS is discussed in F<README.vos> in the perl distribution.
-Perl on VOS can accept either VOS- or Unix-style file
-specifications as in either of the following:
+Perl on VOS is discussed in F<README.vos> in the perl distribution
+(installed as L<perlvos>). Perl on VOS can accept either VOS- or
+Unix-style file specifications as in either of the following:
$ perl -ne "print if /perl_setup/i" >system>notices
$ perl -ne "print if /perl_setup/i" /system/notices
renamed before they can be processed by Perl. Note that VOS limits
file names to 32 or fewer characters.
-The following C functions are unimplemented on VOS, and any attempt by
-Perl to use them will result in a fatal error message and an immediate
-exit from Perl: dup, do_aspawn, do_spawn, fork, waitpid. Once these
-functions become available in the VOS POSIX.1 implementation, you can
-either recompile and rebind Perl, or you can download a newer port from
-ftp.stratus.com.
+See F<README.vos> for restrictions that apply when Perl is built
+with the alpha version of VOS POSIX.1 support.
+
+Perl on VOS is built without any extensions and does not support
+dynamic loading.
The value of C<$^O> on VOS is "VOS". To determine the architecture that
you are running on without resorting to loading all of C<%Config> you
-can examine the content of the C<@INC> array like so:
+can examine the content of the @INC array like so:
if ($^O =~ /VOS/) {
print "I'm on a Stratus box!\n";
=over 4
-=item F<README.vos>
+=item *
+
+F<README.vos>
-=item VOS mailing list
+=item *
+
+The VOS mailing list.
There is no specific mailing list for Perl on VOS. You can post
comments to the comp.sys.stratus newsgroup, or subscribe to the general
Stratus mailing list. Send a letter with "Subscribe Info-Stratus" in
the message body to majordomo@list.stratagy.com.
-=item VOS Perl on the web at C<http://ftp.stratus.com/pub/vos/vos.html>
+=item *
+
+VOS Perl on the web at http://ftp.stratus.com/pub/vos/vos.html
=back
systems). On the mainframe perl currently works under the "Unix system
services for OS/390" (formerly known as OpenEdition), VM/ESA OpenEdition, or
the BS200 POSIX-BC system (BS2000 is supported in perl 5.6 and greater).
+See L<perlos390> for details.
As of R2.5 of USS for OS/390 and Version 2.3 of VM/ESA these Unix
sub-systems do not support the C<#!> shebang trick for script invocation.
=over 4
-=item F<README.os390>, F<README.posix-bc>, F<README.vmesa>
+=item *
+
+*
-=item perl-mvs list
+L<perlos390>, F<README.os390>, F<perlbs2000>, F<README.vmesa>,
+L<perlebcdic>.
+
+=item *
The perl-mvs@perl.org list is for discussion of porting issues as well as
general usage issues for all EBCDIC Perls. Send a message body of
"subscribe perl-mvs" to majordomo@perl.org.
-=item AS/400 Perl information at C<http://as400.rochester.ibm.com/>
+=item *
+
+AS/400 Perl information at
+http://as400.rochester.ibm.com/
as well as on CPAN in the F<ports/> directory.
=back
=over 4
-=item Amiga, F<README.amiga> (installed as L<perlamiga>).
+=item *
+
+Amiga, F<README.amiga> (installed as L<perlamiga>).
+
+=item *
-=item Atari, F<README.mint> and Guido Flohr's web page
-C<http://stud.uni-sb.de/~gufl0000/>
+Atari, F<README.mint> and Guido Flohr's web page
+http://stud.uni-sb.de/~gufl0000/
-=item Be OS, F<README.beos>
+=item *
-=item HP 300 MPE/iX, F<README.mpeix> and Mark Bixby's web page
-C<http://www.cccd.edu/~markb/perlix.html>
+Be OS, F<README.beos>
-=item Novell Netware
+=item *
+
+HP 300 MPE/iX, F<README.mpeix> and Mark Bixby's web page
+http://www.bixby.org/mark/perlix.html
+
+=item *
A free perl5-based PERL.NLM for Novell Netware is available in
-precompiled binary and source code form from C<http://www.novell.com/>
+precompiled binary and source code form from http://www.novell.com/
as well as from CPAN.
-=item Plan 9, F<README.plan9>
+=item *
+
+Plan 9, F<README.plan9>
=back
C<-x> (or C<-X>) determine if a file has an executable file type.
(S<RISC OS>)
+=item alarm SECONDS
+
+=item alarm
+
+Not implemented. (Win32)
+
=item binmode FILEHANDLE
Meaningless. (S<Mac OS>, S<RISC OS>)
Implemented via Spawn. (VM/ESA)
+Does not automatically flush output handles on some platforms.
+(SunOS, Solaris, HP-UX)
+
=item fcntl FILEHANDLE,FUNCTION,SCALAR
Not implemented. (Win32, VMS)
=item fork
-Not implemented. (S<Mac OS>, Win32, AmigaOS, S<RISC OS>, VOS, VM/ESA)
+Not implemented. (S<Mac OS>, AmigaOS, S<RISC OS>, VOS, VM/ESA)
+
+Emulated using multiple interpreters. See L<perlfork>. (Win32)
+
+Does not automatically flush output handles on some platforms.
+(SunOS, Solaris, HP-UX)
=item getlogin
Globbing built-in, but only C<*> and C<?> metacharacters are supported.
(S<Mac OS>)
-Features depend on external perlglob.exe or perlglob.bat. May be
-overridden with something like File::DosGlob, which is recommended.
-(Win32)
-
-Globbing built-in, but only C<*> and C<?> metacharacters are supported.
-Globbing relies on operating system calls, which may return filenames
-in any order. As most filesystems are case-insensitive, even "sorted"
-filenames will not be in case-sensitive order. (S<RISC OS>)
+This operator is implemented via the File::Glob extension on most
+platforms. See L<File::Glob> for portability information.
=item ioctl FILEHANDLE,FUNCTION,SCALAR
Not implemented, hence not useful for taint checking. (S<Mac OS>,
S<RISC OS>)
-C<kill($sig, $pid)> makes the process exit immediately with exit
-status $sig. As in Unix, if $sig is 0 and the specified process exists,
-it returns true without actually terminating it. (Win32)
+C<kill()> doesn't have the semantics of C<raise()>, i.e. it doesn't send
+a signal to the identified process like it does on Unix platforms.
+Instead C<kill($sig, $pid)> terminates the process identified by $pid,
+and makes it exit immediately with exit status $sig. As in Unix, if
+$sig is 0 and the specified process exists, it returns true without
+actually terminating it. (Win32)
=item link OLDFILE,NEWFILE
Not implemented. (VMS, S<RISC OS>)
-Return values may be bogus. (Win32)
+Return values (especially for device and inode) may be bogus. (Win32)
=item msgctl ID,CMD,ARG
open to C<|-> and C<-|> are unsupported. (S<Mac OS>, Win32, S<RISC OS>)
+Opening a process does not automatically flush output handles on some
+platforms. (SunOS, Solaris, HP-UX)
+
=item pipe READHANDLE,WRITEHANDLE
Not implemented. (S<Mac OS>)
Only reliable on sockets. (S<RISC OS>)
+Note that the C<socket FILEHANDLE> form is generally portable.
+
=item semctl ID,SEMNUM,CMD,ARG
=item semget KEY,NSEMS,FLAGS
Not implemented. (S<Mac OS>, Win32, VMS, S<RISC OS>, VOS)
+=item sockatmark SOCKET
+
+A relatively recent addition to socket functions, may not
+be implemented even in UNIX platforms.
+
=item socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL
Not implemented. (S<Mac OS>, Win32, VMS, S<RISC OS>, VOS, VM/ESA)
=item stat
+Platforms that do not have rdev, blksize, or blocks will return these
+as '', so numeric comparison or manipulation of these fields may cause
+'not numeric' warnings.
+
mtime and atime are the same thing, and ctime is creation time instead of
inode change time. (S<Mac OS>)
mtime, atime and ctime all return the last modification time. Device and
inode are not necessarily reliable. (S<RISC OS>)
+dev, rdev, blksize, and blocks are not available. inode is not
+meaningful and will differ between stat calls on the same file. (os2)
+
=item symlink OLDFILE,NEWFILE
Not implemented. (Win32, VMS, S<RISC OS>)
C<$ENV{PERL5SHELL}>. C<system(1, @args)> spawns an external
process and immediately returns its process designator, without
waiting for it to terminate. Return value may be used subsequently
-in C<wait> or C<waitpid>. (Win32)
+in C<wait> or C<waitpid>. Failure to spawn() a subprocess is indicated
+by setting $? to "255 << 8". C<$?> is set in a way compatible with
+Unix (i.e. the exitstatus of the subprocess is obtained by "$? >> 8",
+as described in the documentation). (Win32)
There is no shell to process metacharacters, and the native standard is
to pass a command line terminated by "\n" "\r" or "\0" to the spawned
first token in its argument string. Handles basic redirection
("<" or ">") on its own behalf. (MiNT)
+Does not automatically flush output handles on some platforms.
+(SunOS, Solaris, HP-UX)
+
=item times
Only the first entry returned is nonzero. (S<Mac OS>)
-"cumulative" times will be bogus. On anything other than Windows NT,
-"system" time will be bogus, and "user" time is actually the time
-returned by the clock() function in the C runtime library. (Win32)
+"cumulative" times will be bogus. On anything other than Windows NT
+or Windows 2000, "system" time will be bogus, and "user" time is
+actually the time returned by the clock() function in the C runtime
+library. (Win32)
Not useful. (S<RISC OS>)
Not implemented. (S<Mac OS>, VOS)
Can only be applied to process handles returned for processes spawned
-using C<system(1, ...)>. (Win32)
+using C<system(1, ...)> or pseudo processes created with C<fork()>. (Win32)
Not useful. (S<RISC OS>)
=over 4
+=item v1.48, 02 February 2001
+
+Various updates from perl5-porters over the past year, supported
+platforms update from Jarkko Hietaniemi.
+
+=item v1.47, 22 March 2000
+
+Various cleanups from Tom Christiansen, including migration of
+long platform listings from L<perl>.
+
=item v1.46, 12 February 2000
Updates for VOS and MPE/iX. (Peter Prymmer) Other small changes.
=back
+=head1 Supported Platforms
+
+As of early 2001 (the Perl releases 5.6.1 and 5.7.1), the following
+platforms are able to build Perl from the standard source code
+distribution available at http://www.perl.com/CPAN/src/index.html
+
+ AIX
+ AmigaOS
+ Darwin (Rhapsody)
+ DG/UX
+ DOS DJGPP 1)
+ DYNIX/ptx
+ EPOC
+ FreeBSD
+ HP-UX
+ IRIX
+ Linux
+ MachTen
+ MacOS Classic 2)
+ NonStop-UX
+ ReliantUNIX (SINIX)
+ OpenBSD
+ OpenVMS (VMS)
+ OS/2
+ OS X
+ QNX
+ Solaris
+ Tru64 UNIX (DEC OSF/1, Digital UNIX)
+ UNICOS
+ UNICOS/mk
+ VOS
+ Win32/NT/2K 3)
+
+ 1) in DOS mode either the DOS or OS/2 ports can be used
+ 2) Mac OS Classic (pre-X) is almost 5.6.1-ready; building from
+ the source does work with 5.6.1, but additional MacOS specific
+ source code is needed for a complete build. Contact the mailing
+ list macperl-porters@macperl.org for more information.
+ 3) compilers: Borland, Cygwin, Mingw32 EGCS/GCC, VC++
+
+The following platforms worked for the previous releases (5.6.0 and 5.7.0),
+but we did not manage to test these in time for the 5.7.1 release.
+There is a very good chance that these will work fine with the 5.7.1.
+
+ DomainOS
+ Hurd
+ LynxOS
+ MinGW
+ MPE/iX
+ NetBSD
+ PowerMAX
+ SCO SV
+ SunOS
+ SVR4
+ Unixware
+ Windows 3.1
+ Windows 95
+ Windows 98
+ Windows Me
+
+The following platform worked for the 5.005_03 major release but not
+for 5.6.0. Standardization on UTF-8 as the internal string
+representation in 5.6.0 and 5.6.1 introduced incompatibilities in this
+EBCDIC platform. While Perl 5.7.1 will build on this platform some
+regression tests may fail and the C<use utf8;> pragma typically
+introduces text handling errors.
+
+ OS/390 1)
+
+ 1) previously known as MVS, about to become z/OS.
+
+Strongly related to the OS/390 platform by also being EBCDIC-based
+mainframe platforms are the following platforms:
+
+ POSIX-BC (BS2000)
+ VM/ESA
+
+These are also expected to work, albeit with no UTF-8 support, under 5.6.1
+for the same reasons as OS/390. Contact the mailing list perl-mvs@perl.org
+for more details.
+
+The following platforms have been known to build Perl from source in
+the past (5.005_03 and earlier), but we haven't been able to verify
+their status for the current release, either because the
+hardware/software platforms are rare or because we don't have an
+active champion on these platforms--or both. They used to work,
+though, so go ahead and try compiling them, and let perlbug@perl.org
+of any trouble.
+
+ 3b1
+ A/UX
+ BeOS
+ BSD/OS
+ ConvexOS
+ CX/UX
+ DC/OSx
+ DDE SMES
+ DOS EMX
+ Dynix
+ EP/IX
+ ESIX
+ FPS
+ GENIX
+ Greenhills
+ ISC
+ MachTen 68k
+ MiNT
+ MPC
+ NEWS-OS
+ NextSTEP
+ OpenSTEP
+ Opus
+ Plan 9
+ PowerUX
+ RISC/os
+ SCO ODT/OSR
+ Stellar
+ SVR2
+ TI1500
+ TitanOS
+ Ultrix
+ Unisys Dynix
+ Unixware
+ UTS
+
+Support for the following platform is planned for a future Perl release:
+
+ Netware
+
+The following platforms have their own source code distributions and
+binaries available via http://www.perl.com/CPAN/ports/index.html:
+
+ Perl release
+
+ Netware 5.003_07
+ OS/400 5.005_02
+ Tandem Guardian 5.004
+
+The following platforms have only binaries available via
+http://www.perl.com/CPAN/ports/index.html :
+
+ Perl release
+
+ Acorn RISCOS 5.005_02
+ AOS 5.002
+ LynxOS 5.004_02
+
+Although we do suggest that you always build your own Perl from
+the source code, both for maximal configurability and for security,
+in case you are in a hurry you can check
+http://www.perl.com/CPAN/ports/index.html for binary distributions.
+
+=head1 SEE ALSO
+
+L<perlaix>, L<perlamiga>, L<perlcygwin>, L<perldos>, L<perlepoc>,
+L<perlebcdic>, L<perlhpux>, L<perlos2>, L<perlos390>, L<perlbs2000>,
+L<perlwin32>, L<perlvms>, L<perlvos>, and L<Win32>.
+
=head1 AUTHORS / CONTRIBUTORS
-Abigail <abigail@fnx.com>,
+Abigail <abigail@foad.org>,
Charles Bailey <bailey@newman.upenn.edu>,
Graham Barr <gbarr@pobox.com>,
Tom Christiansen <tchrist@perl.com>,
-Nicholas Clark <Nicholas.Clark@liverpool.ac.uk>,
+Nicholas Clark <nick@ccl4.org>,
Thomas Dorner <Thomas.Dorner@start.de>,
-Andy Dougherty <doughera@lafcol.lafayette.edu>,
-Dominic Dunlop <domo@vo.lu>,
-Neale Ferguson <neale@mailbox.tabnsw.com.au>,
+Andy Dougherty <doughera@lafayette.edu>,
+Dominic Dunlop <domo@computer.org>,
+Neale Ferguson <neale@vma.tabnsw.com.au>,
David J. Fiander <davidf@mks.com>,
Paul Green <Paul_Green@stratus.com>,
-M.J.T. Guy <mjtg@cus.cam.ac.uk>,
-Jarkko Hietaniemi <jhi@iki.fi<gt>,
+M.J.T. Guy <mjtg@cam.ac.uk>,
+Jarkko Hietaniemi <jhi@iki.fi>,
Luther Huffman <lutherh@stratcom.com>,
-Nick Ing-Simmons <nick@ni-s.u-net.com>,
-Andreas J. KE<ouml>nig <koenig@kulturbox.de>,
+Nick Ing-Simmons <nick@ing-simmons.net>,
+Andreas J. KE<ouml>nig <a.koenig@mind.de>,
Markus Laker <mlaker@contax.co.uk>,
Andrew M. Langmead <aml@world.std.com>,
Larry Moore <ljmoore@freespace.net>,
Gurusamy Sarathy <gsar@activestate.com>,
Paul J. Schinder <schinder@pobox.com>,
Michael G Schwern <schwern@pobox.com>,
-Dan Sugalski <sugalskd@ous.edu>,
+Dan Sugalski <dan@sidhe.org>,
Nathan Torkington <gnat@frii.com>.
This document is maintained by Chris Nandor
=head1 VERSION
-Version 1.46, last modified 12 February 2000
+Version 1.48, last modified 24 April 2001