a numeric context, you get a normal increment. If, however, the
variable has been used in only string contexts since it was set, and
has a value that is not the empty string and matches the pattern
-C</^[a-zA-Z]*[0-9]*$/>, the increment is done as a string, preserving each
+C</^[a-zA-Z]*[0-9]*\z/>, the increment is done as a string, preserving each
character within its range, with carry:
print ++($foo = '99'); # prints '100'
C<$a>. If C<$b> is negative, then C<$a % $b> is C<$a> minus the
smallest multiple of C<$b> that is not less than C<$a> (i.e. the
result will be less than or equal to zero).
-Note than when C<use integer> is in scope, "%" give you direct access
+Note than when C<use integer> is in scope, "%" gives you direct access
to the modulus operator as implemented by your C compiler. This
operator is not as well defined for negative operands, but it will
execute faster.
If any list operator (print(), etc.) or any unary operator (chdir(), etc.)
is followed by a left parenthesis as the next token, the operator and
arguments within parentheses are taken to be of highest precedence,
-just like a normal function call. Examples:
+just like a normal function call. For example,
+because named unary operators are higher precedence than ||:
chdir $foo || die; # (chdir $foo) || die
chdir($foo) || die; # (chdir $foo) || die
chdir ($foo) || die; # (chdir $foo) || die
chdir +($foo) || die; # (chdir $foo) || die
-but, because * is higher precedence than ||:
+but, because * is higher precedence than named operators:
chdir $foo * 20; # chdir ($foo * 20)
chdir($foo) * 20; # (chdir $foo) * 20
Binary "<=>" returns -1, 0, or 1 depending on whether the left
argument is numerically less than, equal to, or greater than the right
-argument.
+argument. If your platform supports NaNs (not-a-numbers) as numeric
+values, using them with "<=>" returns undef. NaN is not "<", "==", ">",
+"<=" or ">=" anything (even NaN), so those 5 return false. NaN != NaN
+returns true, as does NaN != anything else. If your platform doesn't
+support NaNs then NaN is just a string with numeric value 0.
+
+ perl -le '$a = NaN; print "No NaN support here" if $a == $a'
+ perl -le '$a = NaN; print "NaN support here" if $a != $a'
Binary "eq" returns true if the left argument is stringwise equal to
the right argument.
Binary "ne" returns true if the left argument is stringwise not equal
to the right argument.
-Binary "cmp" returns -1, 0, or 1 depending on whether the left argument is stringwise
-less than, equal to, or greater than the right argument.
+Binary "cmp" returns -1, 0, or 1 depending on whether the left
+argument is stringwise less than, equal to, or greater than the right
+argument.
"lt", "le", "ge", "gt" and "cmp" use the collation (sort) order specified
by the current locale if C<use locale> is in effect. See L<perllocale>.
printing C<"\n"> may emit no actual data. In general, use C<"\n"> when
you mean a "newline" for your system, but use the literal ASCII when you
need an exact character. For example, most networking protocols expect
-and prefer a CR+LF (C<"\012\015"> or C<"\cJ\cM">) for line terminators,
+and prefer a CR+LF (C<"\015\012"> or C<"\cM\cJ">) for line terminators,
and although they often accept just C<"\012">, they seldom tolerate just
C<"\015">. If you get in the habit of using C<"\n"> for networking,
you may be burned some day.
reset if eof; # clear ?? status for next file
}
-This usage is vaguely depreciated, which means it just might possibly
+This usage is vaguely deprecated, which means it just might possibly
be removed in some distant future version of Perl, perhaps somewhere
around the year 2168.
and is useful when the value you are interpolating won't change over
the life of the script. However, mentioning C</o> constitutes a promise
that you won't change the variables in the pattern. If you change them,
-Perl won't even notice. See also L<"qr//">.
+Perl won't even notice. See also L<"qr/STRING/imosx">.
If the PATTERN evaluates to the empty string, the last
I<successfully> matched regular expression is used instead.
You can intermix C<m//g> matches with C<m/\G.../g>, where C<\G> is a
zero-width assertion that matches the exact position where the previous
-C<m//g>, if any, left off. The C<\G> assertion is not supported without
-the C</g> modifier. (Currently, without C</g>, C<\G> behaves just like
-C<\A>, but that's accidental and may change in the future.)
+C<m//g>, if any, left off. Without the C</g> modifier, the C<\G> assertion
+still anchors at pos(), but the match is of course only attempted once.
+Using C<\G> without C</g> on a target string that has not previously had a
+C</g> match applied to it is the same as using the C<\A> assertion to match
+the beginning of the string.
Examples:
($one,$five,$fifteen) = (`uptime` =~ /(\d+\.\d+)/g);
# scalar context
- $/ = ""; $* = 1; # $* deprecated in modern perls
+ $/ = "";
while (defined($paragraph = <>)) {
while ($paragraph =~ /[a-z]['")]*[.!?]+['")]*\s/g) {
$sentences++;
print "3: '";
print $1 while /(p)/gc; print "', pos=", pos, "\n";
}
+ print "Final: '$1', pos=",pos,"\n" if /\G(.)/;
The last example should print:
1: '', pos=7
2: 'q', pos=8
3: '', pos=8
+ Final: 'q', pos=8
+
+Notice that the final match matched C<q> instead of C<p>, which a match
+without the C<\G> anchor would have done. Also note that the final match
+did not update C<pos> -- C<pos> is only updated on a C</g> match. If the
+final match did indeed match C<p>, it's a good bet that you're running an
+older (pre-5.6.0) Perl.
A useful idiom for C<lex>-like scanners is C</\G.../gc>. You can
combine several regexps like this to process a string part-by-part,
=item qr/STRING/imosx
-This operators quotes--and compiles--its I<STRING> as a regular
+This operator quotes (and possibly compiles) its I<STRING> as a regular
expression. I<STRING> is interpolated the same way as I<PATTERN>
in C<m/PATTERN/>. If "'" is used as the delimiter, no interpolation
is done. Returns a Perl value which may be used instead of the
=item `STRING`
-A string which is (possibly) interpolated and then executed as a system
-command with C</bin/sh> or its equivalent. Shell wildcards, pipes,
-and redirections will be honored. The collected standard output of the
-command is returned; standard error is unaffected. In scalar context,
-it comes back as a single (potentially multi-line) string. In list
-context, returns a list of lines (however you've defined lines with $/
-or $INPUT_RECORD_SEPARATOR).
+A string which is (possibly) interpolated and then executed as a
+system command with C</bin/sh> or its equivalent. Shell wildcards,
+pipes, and redirections will be honored. The collected standard
+output of the command is returned; standard error is unaffected. In
+scalar context, it comes back as a single (potentially multi-line)
+string, or undef if the command failed. In list context, returns a
+list of lines (however you've defined lines with $/ or
+$INPUT_RECORD_SEPARATOR), or an empty list if the command failed.
Because backticks do not affect standard error, use shell file descriptor
syntax (assuming the shell supports this) if you care to address this.
quoting constructs, Perl performs different numbers of passes, from
one to five, but these passes are always performed in the same order.
-=over
+=over 4
=item Finding the end
The next step is interpolation in the text obtained, which is now
delimiter-independent. There are four different cases.
-=over
+=over 4
=item C<<<'EOF'>, C<m''>, C<s'''>, C<tr///>, C<y///>
A string enclosed by backticks (grave accents) first undergoes
double-quote interpolation. It is then interpreted as an external
command, and the output of that command is the value of the
-pseudo-literal, j
-string consisting of all output is returned. In list context, a
-list of values is returned, one per line of output. (You can set
-C<$/> to use a different line terminator.) The command is executed
-each time the pseudo-literal is evaluated. The status value of the
-command is returned in C<$?> (see L<perlvar> for the interpretation
-of C<$?>). Unlike in B<csh>, no translation is done on the return
-data--newlines remain newlines. Unlike in any of the shells, single
-quotes do not hide variable names in the command from interpretation.
-To pass a literal dollar-sign through to the shell you need to hide
-it with a backslash. The generalized form of backticks is C<qx//>.
-(Because backticks always undergo shell expansion as well, see
-L<perlsec> for security concerns.)
+backtick string, like in a shell. In scalar context, a single string
+consisting of all output is returned. In list context, a list of
+values is returned, one per line of output. (You can set C<$/> to use
+a different line terminator.) The command is executed each time the
+pseudo-literal is evaluated. The status value of the command is
+returned in C<$?> (see L<perlvar> for the interpretation of C<$?>).
+Unlike in B<csh>, no translation is done on the return data--newlines
+remain newlines. Unlike in any of the shells, single quotes do not
+hide variable names in the command from interpretation. To pass a
+literal dollar-sign through to the shell you need to hide it with a
+backslash. The generalized form of backticks is C<qx//>. (Because
+backticks always undergo shell expansion as well, see L<perlsec> for
+security concerns.)
In scalar context, evaluating a filehandle in angle brackets yields
the next line from that file (the newline, if any, included), or
the value is automatically assigned to the global variable $_,
destroying whatever was there previously. (This may seem like an
odd thing to you, but you'll use the construct in almost every Perl
-script you write.) The $_ variables is not implicitly localized.
+script you write.) The $_ variable is not implicitly localized.
You'll have to put a C<local $_;> before the loop if you want that
to happen.
open(FOO, "echo *.c | tr -s ' \t\r\f' '\\012\\012\\012\\012'|");
while (<FOO>) {
- chop;
+ chomp;
chmod 0644, $_;
}
or so.
Used on numbers, the bitwise operators ("&", "|", "^", "~", "<<",
-and ">>") always produce integral results. (But see also L<Bitwise
-String Operators>.) However, C<use integer> still has meaning for
+and ">>") always produce integral results. (But see also
+L<Bitwise String Operators>.) However, C<use integer> still has meaning for
them. By default, their results are interpreted as unsigned integers, but
if C<use integer> is in effect, their results are interpreted
as signed integers. For example, C<~0> usually evaluates to a large
The standard Math::BigInt and Math::BigFloat modules provide
variable-precision arithmetic and overloaded operators, although
-they're currently pretty slow. At the cost of some space and
+they're currently pretty slow. At the cost of some space and
considerable speed, they avoid the normal pitfalls associated with
limited-precision representations.
# prints +15241578780673678515622620750190521
-The non-standard modules SSLeay::BN and Math::Pari provide
-equivalent functionality (and much more) with a substantial
-performance savings.
+There are several modules that let you calculate with (bound only by
+memory and cpu-time) unlimited or fixed precision. There are also
+some non-standard modules that provide faster implementations via
+external C libraries.
+
+Here is a short, but incomplete summary:
+
+ Math::Fraction big, unlimited fractions like 9973 / 12967
+ Math::String treat string sequences like numbers
+ Math::FixedPrecision calculate with a fixed precision
+ Math::Currency for currency calculations
+ Bit::Vector manipulate bit vectors fast (uses C)
+ Math::BigIntFast Bit::Vector wrapper for big numbers
+ Math::Pari provides access to the Pari C library
+ Math::BigInteger uses an external C library
+ Math::Cephes uses external Cephes C library (no big numbers)
+ Math::Cephes::Fraction fractions via the Cephes library
+ Math::GMP another one using an external C library
+
+Choose wisely.
=cut
projects / p5sagit/p5-mst-13.2.git / blobdiff