distribution) and setting date/time stamps of existing files to
reflect the bleadperl status.
+Note that this will not delete any files that were in '.' before
+the rsync. Once you are sure that the rsync is running correctly,
+run it with the --delete and the --dry-run options like this:
+
+ # rsync -avz --delete --dry-run rsync://ftp.linux.activestate.com/perl-current/ .
+
+This will I<simulate> an rsync run that also deletes files not
+present in the bleadperl master copy. Observe the results from
+this run closely. If you are sure that the actual run would delete
+no files precious to you, you could remove the '--dry-run' option.
+
You can than check what patch was the latest that was applied by
looking in the file B<.patch>, which will show the number of the
latest patch.
"Rsync uses rsh or ssh for communication. It does not need to be
setuid and requires no special privileges for installation. It
- does not require a inetd entry or a deamon. You must, however,
+ does not require an inetd entry or a daemon. You must, however,
have a working rsh or ssh system. Using ssh is recommended for
its security features."
=back
-=head2 Why rsync the source tree
+=head3 Why rsync the source tree
=over 4
=back
-=head2 Why rsync the patches
+=head3 Why rsync the patches
=over 4
excellent point to start with when choosing to use the 'rsync the
patches' scheme. Starting with perl@7582, which means a set of source
files on which the latest applied patch is number 7582, you apply all
-succeeding patches available from than on (7583, 7584, ...).
+succeeding patches available from then on (7583, 7584, ...).
You can use the patches later as a kind of search archive.
=item Finding the source of misbehaviour
When you keep in sync with bleadperl, the pumpking would love to
-I<see> that the community efforts realy work. So after each of his
+I<see> that the community efforts really work. So after each of his
sync points, you are to 'make test' to check if everything is still
in working order. If it is, you do 'make ok', which will send an OK
report to perlbug@perl.org. (If you do not have access to a mailer
do 'make okfile', which creates the file C<perl.ok>, which you can
than take to your favourite mailer and mail yourself).
-But of course, as always, things will not allways lead to a success
+But of course, as always, things will not always lead to a success
path, and one or more test do not pass the 'make test'. Before
sending in a bug report (using 'make nok' or 'make nokfile'), check
the mailing list if someone else has reported the bug already and if
To report a bug in Perl, use the program I<perlbug> which comes with
Perl (if you can't get Perl to work, send mail to the address
-I<perlbug@perl.com> or I<perlbug@perl.org>). Reporting bugs through
+I<perlbug@perl.org> or I<perlbug@perl.com>). Reporting bugs through
I<perlbug> feeds into the automated bug-tracking system, access to
which is provided through the web at I<http://bugs.perl.org/>. It
often pays to check the archives of the perl5-porters mailing list to
1 PP(pp_add)
2 {
- 3 djSP; dATARGET; tryAMAGICbin(add,opASSIGN);
+ 3 dSP; dATARGET; tryAMAGICbin(add,opASSIGN);
4 {
5 dPOPTOPnnrl_ul;
6 SETn( left + right );
=item break source.c:xxx
Tells the debugger that we'll want to pause execution when we reach
-either the named function (but see L</Function names>!) or the given
+either the named function (but see L<perlguts/Internal Functions>!) or the given
line in the named source file.
=item step
(gdb) break Perl_pp_add
Breakpoint 1 at 0x46249f: file pp_hot.c, line 309.
-Notice we use C<Perl_pp_add> and not C<pp_add> - see L<perlguts/Function Names>.
+Notice we use C<Perl_pp_add> and not C<pp_add> - see L<perlguts/Internal Functions>.
With the breakpoint in place, we can run our program:
(gdb) run -e '$b = "6XXXX"; $c = 2.3; $a = $b + $c'
libraries, and then:
Breakpoint 1, Perl_pp_add () at pp_hot.c:309
- 309 djSP; dATARGET; tryAMAGICbin(add,opASSIGN);
+ 309 dSP; dATARGET; tryAMAGICbin(add,opASSIGN);
(gdb) step
311 dPOPTOPnnrl_ul;
(gdb)
which would instrument Perl in memory, run Perl on test.pl,
then finally report any memory problems.
+=head2 Compaq's/Digital's Third Degree
+
+Third Degree is a tool for memory leak detection and memory access checks.
+It is one of the many tools in the ATOM toolkit. The toolkit is only
+available on Tru64 (formerly known as Digital UNIX formerly known as
+DEC OSF/1).
+
+When building Perl, you must first run Configure with -Doptimize=-g
+and -Uusemymalloc flags, after that you can use the make targets
+"perl.third" and "test.third".
+
+The short story is that with "atom" you can instrument the Perl
+executable to create a new executable called F<perl.third>. When the
+instrumented executable is run, it creates a log of dubious memory
+traffic in file called F<perl.3log>. See the manual pages of atom and
+third for more information. The most extensive Third Degree
+documentation is available in the Compaq "Tru64 UNIX Programmer's
+Guide", chapter "Debugging Programs with Third Degree".
+
+The "test.third" leaves a lot of files named F<perl.3log.*> in the t/
+subdirectory. There is a problem with these files: Third Degree is so
+effective that it finds problems also in the system libraries.
+Therefore there are certain types of errors that you should ignore in
+your debugging. Errors with stack traces matching
+
+ __actual_atof|__catgets|_doprnt|__exc_|__exec|_findio|__localtime|setlocale|__sia_|__strxfrm
+
+(all in libc.so) are known to be non-serious. You can also
+ignore the combinations
+
+ Perl_gv_fetchfile() calling strcpy()
+ S_doopen_pmc() calling strcmp()
+
+causing "rih" (reading invalid heap) errors.
+
+There are also leaks that for given certain definition of a leak,
+aren't. See L</PERL_DESTRUCT_LEVEL> for more information.
+
+=head2 PERL_DESTRUCT_LEVEL
+
+If you want to run any of the tests yourself manually using the
+pureperl or perl.third executables, please note that by default
+perl B<does not> explicitly cleanup all the memory it has allocated
+(such as global memory arenas) but instead lets the exit() of
+the whole program "take care" of such allocations, also known
+as "global destruction of objects".
+
+There is a way to tell perl to do complete cleanup: set the
+environment variable PERL_DESTRUCT_LEVEL to a non-zero value.
+The t/TEST wrapper does set this to 2, and this is what you
+need to do too, if you don't want to see the "global leaks":
+
+ PERL_DESTRUCT_LEVEL=2 ./perl.third t/foo/bar.t
+
+=head2 Gprof Profiling
+
+gprof is a profiling tool available in many UNIX platforms.
+The profiling is based on statistical time-sampling; this means that
+some routines, especially those executing really fast, may be missed.
+
+You can build a profiled version of perl called "perl.gprof" by
+invoking the make target "perl.gprof". Running the profiled version
+of Perl will create an output file called F<gmon.out> is created which
+contains the profiling data collected during the execution.
+
+The gprof tool can then display the collected data in various ways.
+Usually gprof understands the following options:
+
+=over 4
+
+=item -a
+
+Suppress statically defined functions from the profile.
+
+=item -b
+
+Suppress the verbose descriptions in the profile.
+
+=item -e routine
+
+Exclude the given routine and its descendants from the profile.
+
+=item -f routine
+
+Display only the given routine and its descendants in the profile.
+
+=item -s
+
+Generate a summary file called F<gmon.sum> which then may be given
+to subsequent gprof runs to accumulate data over several runs.
+
+=item -z
+
+Display routines that have zero usage.
+
+=back
+
+For more detailed explanation of the available commands and output
+formats, see your own local documentation of gprof.
+
+=head2 Pixie Profiling
+
+Pixie is a profiling tool available on IRIX and Tru64
+(aka Digital UNIX aka DEC OSF/1) platforms. Pixie does its profiling
+using "basic-block counting". A basic block is a program region that
+is entered only at the beginning and exited only at the end.
+
+You can build a profiled version of perl called F<perl.pixie> by
+invoking the make target "perl.pixie" (in Tru64 a file called
+F<perl.Addrs> will also be silently created, this file contains the
+addresses of the basic blocks). Running the profiled version of Perl
+will create a new file called "perl.Counts" which contains the counts
+for the basic block for that particular program execution.
+
+To display the results you must use the "prof" utility. The exact
+incantation depends on your operating system, "prof perl.Counts" in
+IRIX, and "prof -pixie -all -L. perl" in Tru64.
+
+In IRIX the following prof options are available:
+
+=over 4
+
+=item -h
+
+Reports the most heavily used lines in descending order of use.
+Useful for finding the hotspot lines.
+
+=item -l
+
+Groups lines by procedure, with procedures sorted in descending order of use.
+Within a procedure, lines are listed in source order.
+Useful for finding the hotspots of procedures.
+
+=back
+
+In Tru64 the following options are available:
+
+=over 4
+
+=item -p[rocedures]
+
+Procedures sorted in descending order by the number of cycles executed
+in each procedure. Useful for finding the hotspot procedures.
+(This is the default option.)
+
+=item -h[eavy]
+
+Lines sorted in descending order by the number of cycles executed in
+each line. Useful for finding the hotspot lines.
+
+=item -i[nvocations]
+
+The called procedures are sorted in descending order by number of calls
+made to the procedures. Useful for finding the most used procedures.
+
+=item -l[ines]
+
+Grouped by procedure, sorted by cycles executed per procedure.
+Useful for finding the hotspots of procedures.
+
+=item -testcoverage
+
+The compiler emitted code for these lines, but the code was unexecuted.
+
+=item -z[ero]
+
+Unexecuted procedures.
+
+=back
+
+For further information, see your system's manual pages for pixie and prof.
+
=head2 CONCLUSION
We've had a brief look around the Perl source, an overview of the stages