the format.
STRLEN is an integer type (Size_t, usually defined as size_t in
-config.h) guaranteed to be large enough to represent the size of
+config.h) guaranteed to be large enough to represent the size of
any string that perl can handle.
The C<sv_set*()> functions are not generic enough to operate on values
(offset OK) to signal to other functions that the offset hack is in
effect, and it puts the number of bytes chopped off into the IV field
of the SV. It then moves the PV pointer (called C<SvPVX>) forward that
-many bytes, and adjusts C<SvCUR> and C<SvLEN>.
+many bytes, and adjusts C<SvCUR> and C<SvLEN>.
Hence, at this point, the start of the buffer that we allocated lives
at C<SvPVX(sv) - SvIV(sv)> in memory and the PV pointer is pointing
These will tell you if you truly have an integer, double, or string pointer
stored in your SV. The "p" stands for private.
+The are various ways in which the private and public flags may differ.
+For example, a tied SV may have a valid underlying value in the IV slot
+(so SvIOKp is true), but the data should be accessed via the FETCH
+routine rather than directly, so SvIOK is false. Another is when
+numeric conversion has occured and precision has been lost: only the
+private flag is set on 'lossy' values. So when an NV is converted to an
+IV with loss, SvIOKp, SvNOKp and SvNOK will be set, while SvIOK wont be.
+
In general, though, it's best to use the C<Sv*V> macros.
=head2 Working with AVs
bool sv_derived_from(SV* sv, const char* name);
-To check if you've got an object derived from a specific class you have
+To check if you've got an object derived from a specific class you have
to write:
if (sv_isobject(sv) && sv_derived_from(sv, class)) { ... }
However, if you mortalize a variable twice, the reference count will
later be decremented twice.
-You should be careful about creating mortal variables. Strange things
-can happen if you make the same value mortal within multiple contexts,
-or if you make a variable mortal multiple times.
+"Mortal" SVs are mainly used for SVs that are placed on perl's stack.
+For example an SV which is created just to pass a number to a called sub
+is made mortal to have it cleaned up automatically when stack is popped.
+Similarly results returned by XSUBs (which go in the stack) are often
+made mortal.
To create a mortal variable, use the functions:
SV* sv_2mortal(SV*)
SV* sv_mortalcopy(SV*)
-The first call creates a mortal SV, the second converts an existing
+The first call creates a mortal SV (with no value), the second converts an existing
SV to a mortal SV (and thus defers a call to C<SvREFCNT_dec>), and the
third creates a mortal copy of an existing SV.
+Because C<sv_newmortal> gives the new SV no value,it must normally be given one
+via C<sv_setpv>, C<sv_setiv> etc. :
+
+ SV *tmp = sv_newmortal();
+ sv_setiv(tmp, an_integer);
+
+As that is multiple C statements it is quite common so see this idiom instead:
+
+ SV *tmp = sv_2mortal(newSViv(an_integer));
+
+
+You should be careful about creating mortal variables. Strange things
+can happen if you make the same value mortal within multiple contexts,
+or if you make a variable mortal multiple times. Thinking of "Mortalization"
+as deferred C<SvREFCNT_dec> should help to minimize such problems.
+For example if you are passing an SV which you I<know> has high enough REFCNT
+to survive its use on the stack you need not do any mortalization.
+If you are not sure then doing an C<SvREFCNT_inc> and C<sv_2mortal>, or
+making a C<sv_mortalcopy> is safer.
The mortal routines are not just for SVs -- AVs and HVs can be
made mortal by passing their address (type-casted to C<SV*>) to the
feature.
If C<sv> is not already magical, Perl uses the C<SvUPGRADE> macro to
-set the C<SVt_PVMG> flag for the C<sv>. Perl then continues by adding
-it to the beginning of the linked list of magical features. Any prior
-entry of the same type of magic is deleted. Note that this can be
-overridden, and multiple instances of the same type of magic can be
-associated with an SV.
+convert C<sv> to type C<SVt_PVMG>. Perl then continues by adding new magic
+to the beginning of the linked list of magical features. Any prior entry
+of the same type of magic is deleted. Note that this can be overridden,
+and multiple instances of the same type of magic can be associated with an
+SV.
The C<name> and C<namlen> arguments are used to associate a string with
the magic, typically the name of a variable. C<namlen> is stored in the
See the "Magic Virtual Table" section below. The C<how> argument is also
stored in the C<mg_type> field. The value of C<how> should be chosen
from the set of macros C<PERL_MAGIC_foo> found perl.h. Note that before
-these macros were added, perl internals used to directly use character
+these macros were added, Perl internals used to directly use character
literals, so you may occasionally come across old code or documentation
referrring to 'U' magic rather than C<PERL_MAGIC_uvar> for example.
The C<obj> argument is stored in the C<mg_obj> field of the C<MAGIC>
structure. If it is not the same as the C<sv> argument, the reference
count of the C<obj> object is incremented. If it is the same, or if
-the C<how> argument is C<PERL_MAGIC_arylen>", or if it is a NULL pointer,
+the C<how> argument is C<PERL_MAGIC_arylen>, or if it is a NULL pointer,
then C<obj> is merely stored, without the reference count being incremented.
There is also a function to add magic to an C<HV>:
L PERL_MAGIC_dbfile (none) Debugger %_<filename
l PERL_MAGIC_dbline vtbl_dbline Debugger %_<filename element
m PERL_MAGIC_mutex vtbl_mutex ???
- o PERL_MAGIC_collxfrm vtbl_collxfrm Locale transformation
+ o PERL_MAGIC_collxfrm vtbl_collxfrm Locale collate transformation
P PERL_MAGIC_tied vtbl_pack Tied array or hash
p PERL_MAGIC_tiedelem vtbl_packelem Tied array or hash element
q PERL_MAGIC_tiedscalar vtbl_packelem Tied scalar or handle
C<mg_ptr> field points to a C<ufuncs> structure:
struct ufuncs {
- I32 (*uf_val)(IV, SV*);
- I32 (*uf_set)(IV, SV*);
+ I32 (*uf_val)(pTHX_ IV, SV*);
+ I32 (*uf_set)(pTHX_ IV, SV*);
IV uf_index;
};
tie = newRV_noinc((SV*)newHV());
stash = gv_stashpv("MyTie", TRUE);
sv_bless(tie, stash);
- hv_magic(hash, tie, PERL_MAGIC_tied);
+ hv_magic(hash, (GV*)tie, PERL_MAGIC_tied);
RETVAL = newRV_noinc(hash);
OUTPUT:
RETVAL
The following API list contains functions, thus one needs to
provide pointers to the modifiable data explicitly (either C pointers,
-or Perlish C<GV *>s). Where the above macros take C<int>, a similar
+or Perlish C<GV *>s). Where the above macros take C<int>, a similar
function takes C<int *>.
=over 4
where C<SP> is the macro that represents the local copy of the stack pointer,
and C<num> is the number of elements the stack should be extended by.
-Now that there is room on the stack, values can be pushed on it using the
-macros to push IVs, doubles, strings, and SV pointers respectively:
+Now that there is room on the stack, values can be pushed on it using C<PUSHs>
+macro. The values pushed will often need to be "mortal" (See L</Reference Counts and Mortality>).
- PUSHi(IV)
- PUSHn(double)
- PUSHp(char*, I32)
- PUSHs(SV*)
+ PUSHs(sv_2mortal(newSViv(an_integer)))
+ PUSHs(sv_2mortal(newSVpv("Some String",0)))
+ PUSHs(sv_2mortal(newSVnv(3.141592)))
And now the Perl program calling C<tzname>, the two values will be assigned
as in:
($standard_abbrev, $summer_abbrev) = POSIX::tzname;
An alternate (and possibly simpler) method to pushing values on the stack is
-to use the macros:
+to use the macro:
- XPUSHi(IV)
- XPUSHn(double)
- XPUSHp(char*, I32)
XPUSHs(SV*)
-These macros automatically adjust the stack for you, if needed. Thus, you
+This macro automatically adjust the stack for you, if needed. Thus, you
do not need to call C<EXTEND> to extend the stack.
-However, see L</Putting a C value on Perl stack>
+
+Despite their suggestions in earlier versions of this document the macros
+C<PUSHi>, C<PUSHn> and C<PUSHp> are I<not> suited to XSUBs which return
+multiple results, see L</Putting a C value on Perl stack>.
For more information, consult L<perlxs> and L<perlxstut>.
On a related note, if you do use C<(X)PUSH[npi]>, then you're going to
need a C<dTARG> in your variable declarations so that the C<*PUSH*>
-macros can make use of the local variable C<TARG>.
+macros can make use of the local variable C<TARG>.
=head2 Scratchpads
done in the subroutine peep(). Optimizations performed at this stage
are subject to the same restrictions as in the pass 2.
+=head2 Pluggable runops
+
+The compile tree is executed in a runops function. There are two runops
+functions in F<run.c>. C<Perl_runops_debug> is used with DEBUGGING and
+C<Perl_runops_standard> is used otherwise. For fine control over the
+execution of the compile tree it is possible to provide your own runops
+function.
+
+It's probably best to copy one of the existing runops functions and
+change it to suit your needs. Then, in the BOOT section of your XS
+file, add the line:
+
+ PL_runops = my_runops;
+
+This function should be as efficient as possible to keep your programs
+running as fast as possible.
+
=head1 Examining internal data structures with the C<dump> functions
To aid debugging, the source file F<dump.c> contains a number of
The most commonly used of these functions is C<Perl_sv_dump>; it's used
for dumping SVs, AVs, HVs, and CVs. The C<Devel::Peek> module calls
C<sv_dump> to produce debugging output from Perl-space, so users of that
-module should already be familiar with its format.
+module should already be familiar with its format.
C<Perl_op_dump> can be used to dump an C<OP> structure or any of its
derivatives, and produces output similiar to C<perl -Dx>; in fact,
use of macros and subroutine naming conventions.
First problem: deciding which functions will be public API functions and
-which will be private. All functions whose names begin C<S_> are private
+which will be private. All functions whose names begin C<S_> are private
(think "S" for "secret" or "static"). All other functions begin with
"Perl_", but just because a function begins with "Perl_" does not mean it is
-part of the API. (See L</Internal Functions>.) The easiest way to be B<sure> a
-function is part of the API is to find its entry in L<perlapi>.
-If it exists in L<perlapi>, it's part of the API. If it doesn't, and you
-think it should be (i.e., you need it for your extension), send mail via
+part of the API. (See L</Internal Functions>.) The easiest way to be B<sure> a
+function is part of the API is to find its entry in L<perlapi>.
+If it exists in L<perlapi>, it's part of the API. If it doesn't, and you
+think it should be (i.e., you need it for your extension), send mail via
L<perlbug> explaining why you think it should be.
Second problem: there must be a syntax so that the same subroutine
=item M
-This function is part of the experimental development API, and may change
+This function is part of the experimental development API, and may change
or disappear without notice.
=item o