-T File is an ASCII text file (heuristic guess).
-B File is a "binary" file (opposite of -T).
- -M Age of file in days when script started.
+ -M Script start time minus file modification time, in days.
-A Same for access time.
- -C Same for inode change time.
+ -C Same for inode change time (Unix, may differ for other platforms)
Example:
structure of the previous file test (or stat operator) is used, saving
a system call. (This doesn't work with C<-t>, and you need to remember
that lstat() and C<-l> will leave values in the stat structure for the
-symbolic link, not the real file.) Example:
+symbolic link, not the real file.) (Also, if the stat buffer was filled by
+a C<lstat> call, C<-T> and C<-B> will reset it with the results of C<stat _>).
+Example:
print "Can do.\n" if -r $a || -w _ || -x _;
on your favorite CPAN mirror for a slew of potentially useful
modules.
-If using crypt() on a Unicode string (which potentially has
-characters with codepoints above 255), Perl tries to make sense of
-the situation by using only the low eight bits of the characters when
-calling crypt().
+If using crypt() on a Unicode string (which I<potentially> has
+characters with codepoints above 255), Perl tries to make sense
+of the situation by trying to downgrade (a copy of the string)
+the string back to an eight-bit byte string before calling crypt()
+(on that copy). If that works, good. If not, crypt() dies with
+C<Wide character in crypt>.
=item dbmclose HASH
This function is now largely obsolete, partly because it's very
hard to convert a core file into an executable, and because the
real compiler backends for generating portable bytecode and compilable
-C code have superseded it.
+C code have superseded it. That's why you should now invoke it as
+C<CORE::dump()>, if you don't want to be warned against a possible
+typo.
If you're looking to use L<dump> to speed up your program, consider
generating bytecode or native C code as described in L<perlcc>. If
C<< <> >> operator. Since C<< <> >> isn't explicitly opened,
as a normal filehandle is, an C<eof()> before C<< <> >> has been
used will cause C<@ARGV> to be examined to determine if input is
-available.
+available. Similarly, an C<eof()> after C<< <> >> has returned
+end-of-file will assume you are processing another C<@ARGV> list,
+and if you haven't set C<@ARGV>, will read input from C<STDIN>;
+see L<perlop/"I/O Operators">.
In a C<< while (<>) >> loop, C<eof> or C<eof(ARGV)> can be used to
detect the end of each file, C<eof()> will only detect the end of the
error message. If there was no error, C<$@> is guaranteed to be a null
string. Beware that using C<eval> neither silences perl from printing
warnings to STDERR, nor does it stuff the text of warning messages into C<$@>.
-To do either of those, you have to use the C<$SIG{__WARN__}> facility. See
-L</warn> and L<perlvar>.
+To do either of those, you have to use the C<$SIG{__WARN__}> facility, or
+turn off warnings inside the BLOCK or EXPR using S<C<no warnings 'all'>>.
+See L</warn>, L<perlvar>, L<warnings> and L<perllexwarn>.
Note that, because C<eval> traps otherwise-fatal errors, it is useful for
determining whether a particular feature (such as C<socket> or C<symlink>)
You may use the three-argument form of open to specify
I<I/O disciplines> that affect how the input and output
are processed: see L</binmode> and L<open>. For example
-
+
open(FH, "<:utf8", "file")
will open the UTF-8 encoded file containing Unicode characters,
like its machine-level representation. For example, on 32-bit machines
a converted integer may be represented by a sequence of 4 bytes.
-The TEMPLATE is a
-sequence of characters that give the order and type of values, as
-follows:
+The TEMPLATE is a sequence of characters that give the order and type
+of values, as follows:
a A string with arbitrary binary data, will be null padded.
A A text (ASCII) string, will be space padded.
integer values _and_ if Perl has been compiled to support those.
Causes a fatal error otherwise.)
+ j A signed integer value (a Perl internal integer, IV).
+ J An unsigned integer value (a Perl internal unsigned integer, UV).
+
f A single-precision float in the native format.
d A double-precision float in the native format.
+ F A floating point value in the native native format
+ (a Perl internal floating point value, NV).
+ D A long double-precision float in the native format.
+ (Long doubles are available only if your system supports long
+ double values _and_ if Perl has been compiled to support those.
+ Causes a fatal error otherwise.)
+
p A pointer to a null-terminated string.
P A pointer to a structure (fixed-length string).
x A null byte.
X Back up a byte.
@ Null fill to absolute position.
+ ( Start of a ()-group.
The following rules apply:
Each letter may optionally be followed by a number giving a repeat
count. With all types except C<a>, C<A>, C<Z>, C<b>, C<B>, C<h>,
-C<H>, and C<P> the pack function will gobble up that many values from
-the LIST. A C<*> for the repeat count means to use however many items are
-left, except for C<@>, C<x>, C<X>, where it is equivalent
-to C<0>, and C<u>, where it is equivalent to 1 (or 45, what is the
-same).
+C<H>, C<@>, C<x>, C<X> and C<P> the pack function will gobble up that
+many values from the LIST. A C<*> for the repeat count means to use
+however many items are left, except for C<@>, C<x>, C<X>, where it is
+equivalent to C<0>, and C<u>, where it is equivalent to 1 (or 45, what
+is the same). A numeric repeat count may optionally be enclosed in
+brackets, as in C<pack 'C[80]', @arr>.
+
+One can replace the numeric repeat count by a template enclosed in brackets;
+then the packed length of this template in bytes is used as a count.
+For example, C<x[L]> skips a long (it skips the number of bytes in a long);
+the template C<$t X[$t] $t> unpack()s twice what $t unpacks.
+If the template in brackets contains alignment commands (such as C<x![d]>),
+its packed length is calculated as if the start of the template has the maximal
+possible alignment.
When used with C<Z>, C<*> results in the addition of a trailing null
byte (so the packed result will be one longer than the byte C<length>
the packed structure contains a byte count followed by the string itself.
You write I<length-item>C</>I<string-item>.
-The I<length-item> can be any C<pack> template letter,
-and describes how the length value is packed.
-The ones likely to be of most use are integer-packing ones like
-C<n> (for Java strings), C<w> (for ASN.1 or SNMP)
-and C<N> (for Sun XDR).
+The I<length-item> can be any C<pack> template letter, and describes
+how the length value is packed. The ones likely to be of most use are
+integer-packing ones like C<n> (for Java strings), C<w> (for ASN.1 or
+SNMP) and C<N> (for Sun XDR).
The I<string-item> must, at present, be C<"A*">, C<"a*"> or C<"Z*">.
For C<unpack> the length of the string is obtained from the I<length-item>,
=item *
-The integer formats C<s>, C<S>, C<i>, C<I>, C<l>, and C<L>
+The integer formats C<s>, C<S>, C<i>, C<I>, C<l>, C<L>, C<j>, and C<J>
are inherently non-portable between processors and operating systems
because they obey the native byteorder and endianness. For example a
4-byte integer 0x12345678 (305419896 decimal) would be ordered natively
=item *
+A ()-group is a sub-TEMPLATE enclosed in parentheses. A group may
+take a repeat count, both as postfix, and via the C</> template
+character.
+
+=item *
+
+C<x> and C<X> accept C<!> modifier. In this case they act as
+alignment commands: they jump forward/back to the closest position
+aligned at a multiple of C<count> bytes. For example, to pack() or
+unpack() C's C<struct {char c; double d; char cc[2]}> one may need to
+use the template C<C x![d] d C[2]>; this assumes that doubles must be
+aligned on the double's size.
+
+For alignment commands C<count> of 0 is equivalent to C<count> of 1;
+both result in no-ops.
+
+=item *
+
A comment in a TEMPLATE starts with C<#> and goes to the end of line.
=item *
=item send SOCKET,MSG,FLAGS
-Sends a message on a socket. Attemps to send the scalar MSG to the
+Sends a message on a socket. Attempts to send the scalar MSG to the
SOCKET filehandle. Takes the same flags as the system call of the
same name. On unconnected sockets you must specify a destination to
send TO, in which case it does a C C<sendto>. Returns the number of
shutdown(Rdr, 1); # no more writing for reader
shutdown(Wtr, 0); # no more reading for writer
-See L<perlipc> for an example of socketpair use.
+See L<perlipc> for an example of socketpair use. Perl 5.8 and later will
+emulate socketpair using IP sockets to localhost if your system implements
+sockets but not socketpair.
=item sort SUBNAME LIST
If OFFSET is negative then it starts that far from the end of the array.
If LENGTH is omitted, removes everything from OFFSET onward.
If LENGTH is negative, leaves that many elements off the end of the array.
-If both OFFSET and LENGTH are omitted, removes everything.
+If both OFFSET and LENGTH are omitted, removes everything. If OFFSET is
+past the end of the array, perl issues a warning, and splices at the
+end of the array.
The following equivalences hold (assuming C<$[ == 0>):
not be confused with the use of C<//> to mean "the last successful pattern
match".
-Empty leading (or trailing) fields are produced when there positive width
+Empty leading (or trailing) fields are produced when there are positive width
matches at the beginning (or end) of the string; a zero-width match at the
beginning (or end) of the string does not produce an empty field. For
example:
to set C<$|> ($AUTOFLUSH in English) or call the C<autoflush()> method
of C<IO::Handle> on any open handles.
-The return value is the exit status of the program as
-returned by the C<wait> call. To get the actual exit value divide by
-256. See also L</exec>. This is I<not> what you want to use to capture
+The return value is the exit status of the program as returned by the
+C<wait> call. To get the actual exit value shift right by eight (see below).
+See also L</exec>. This is I<not> what you want to use to capture
the output from a command, for that you should use merely backticks or
C<qx//>, as described in L<perlop/"`STRING`">. Return value of -1
indicates a failure to start the program (inspect $! for the reason).
Like C<exec>, C<system> allows you to lie to a program about its name if
you use the C<system PROGRAM LIST> syntax. Again, see L</exec>.
-Because C<system> and backticks block C<SIGINT> and C<SIGQUIT>, killing the
-program they're running doesn't actually interrupt your program.
+Because C<system> and backticks block C<SIGINT> and C<SIGQUIT>,
+killing the program they're running doesn't actually interrupt
+your program.
@args = ("command", "arg1", "arg2");
system(@args) == 0
$signal_num = $? & 127;
$dumped_core = $? & 128;
+or more portably by using the W*() calls of the POSIX extension;
+see L<perlport> for more information.
+
When the arguments get executed via the system shell, results
and return codes will be subject to its quirks and capabilities.
See L<perlop/"`STRING`"> and L</exec> for details.