arranged by category. Some functions appear in more
than one place.
-=over
+=over 4
=item Functions for SCALARs or strings
=item Keywords related to scoping
-C<caller>, C<import>, C<local>, C<my>, C<package>, C<use>
+C<caller>, C<import>, C<local>, C<my>, C<our>, C<package>, C<use>
=item Miscellaneous functions
-C<defined>, C<dump>, C<eval>, C<formline>, C<local>, C<my>, C<reset>,
+C<defined>, C<dump>, C<eval>, C<formline>, C<local>, C<my>, C<our>, C<reset>,
C<scalar>, C<undef>, C<wantarray>
=item Functions for processes and process groups
C<accept>, C<bind>, C<connect>, C<getpeername>, C<getsockname>,
C<getsockopt>, C<listen>, C<recv>, C<send>, C<setsockopt>, C<shutdown>,
-C<socket>, C<socketpair>
+C<sockatmark>, C<socket>, C<socketpair>
=item System V interprocess communication functions
=item Functions new in perl5
C<abs>, C<bless>, C<chomp>, C<chr>, C<exists>, C<formline>, C<glob>,
-C<import>, C<lc>, C<lcfirst>, C<map>, C<my>, C<no>, C<prototype>, C<qx>,
-C<qw>, C<readline>, C<readpipe>, C<ref>, C<sub*>, C<sysopen>, C<tie>,
+C<import>, C<lc>, C<lcfirst>, C<map>, C<my>, C<no>, C<our>, C<prototype>,
+C<qx>, C<qw>, C<readline>, C<readpipe>, C<ref>, C<sub*>, C<sysopen>, C<tie>,
C<tied>, C<uc>, C<ucfirst>, C<untie>, C<use>
* - C<sub> was a keyword in perl4, but in perl5 it is an
C<semget>, C<semop>, C<setgrent>, C<sethostent>, C<setnetent>,
C<setpgrp>, C<setpriority>, C<setprotoent>, C<setpwent>,
C<setservent>, C<setsockopt>, C<shmctl>, C<shmget>, C<shmread>,
-C<shmwrite>, C<socket>, C<socketpair>, C<stat>, C<symlink>, C<syscall>,
-C<sysopen>, C<system>, C<times>, C<truncate>, C<umask>, C<unlink>,
+C<shmwrite>, C<sockatmark>, C<socket>, C<socketpair>,
+C<stat>, C<symlink>, C<syscall>, C<sysopen>, C<system>,
+C<times>, C<truncate>, C<umask>, C<unlink>,
C<utime>, C<wait>, C<waitpid>
For more information about the portability of these functions, see
-O File is owned by real uid.
-e File exists.
- -z File has zero size.
- -s File has nonzero size (returns size).
+ -z File has zero size (is empty).
+ -s File has nonzero size (returns size in bytes).
-f File is a plain file.
-d File is a directory.
Example:
while (<>) {
- chop;
+ chomp;
next unless -f $_; # ignore specials
#...
}
The C<-T> and C<-B> switches work as follows. The first block or so of the
file is examined for odd characters such as strange control codes or
-characters with the high bit set. If too many strange characters (E<gt>30%)
+characters with the high bit set. If too many strange characters (>30%)
are found, it's a C<-B> file, otherwise it's a C<-T> file. Also, any file
containing null in the first block is considered a binary file. If C<-T>
or C<-B> is used on a filehandle, the current stdio buffer is examined
does. Returns the packed address if it succeeded, false otherwise.
See the example in L<perlipc/"Sockets: Client/Server Communication">.
+On systems that support a close-on-exec flag on files, the flag will
+be set for the newly opened file descriptor, as determined by the
+value of $^F. See L<perlvar/$^F>.
+
=item alarm SECONDS
=item alarm
For delays of finer granularity than one second, you may use Perl's
four-argument version of select() leaving the first three arguments
undefined, or you might be able to use the C<syscall> interface to
-access setitimer(2) if your system supports it. The Time::HiRes module
-from CPAN may also prove useful.
+access setitimer(2) if your system supports it. The Time::HiRes
+module (from CPAN, and starting from Perl 5.8 part of the standard
+distribution) may also prove useful.
It is usually a mistake to intermix C<alarm> and C<sleep> calls.
(C<sleep> may be internally implemented in your system with C<alarm>)
Returns the arctangent of Y/X in the range -PI to PI.
-For the tangent operation, you may use the C<POSIX::tan()>
+For the tangent operation, you may use the C<Math::Trig::tan>
function, or use the familiar relation:
sub tan { sin($_[0]) / cos($_[0]) }
packed address of the appropriate type for the socket. See the examples in
L<perlipc/"Sockets: Client/Server Communication">.
+=item binmode FILEHANDLE, DISCIPLINE
+
=item binmode FILEHANDLE
-Arranges for FILEHANDLE to be read or written in "binary" mode on
-systems whose run-time libraries force the programmer to guess
-between binary and text files. If FILEHANDLE is an expression, the
-value is taken as the name of the filehandle. binmode() should be
-called after the C<open> but before any I/O is done on the filehandle.
-The only way to reset binary mode on a filehandle is to reopen the
-file.
+Arranges for FILEHANDLE to be read or written in "binary" or "text" mode
+on systems where the run-time libraries distinguish between binary and
+text files. If FILEHANDLE is an expression, the value is taken as the
+name of the filehandle. DISCIPLINE can be either of C<":raw"> for
+binary mode or C<":crlf"> for "text" mode. If the DISCIPLINE is
+omitted, it defaults to C<":raw">.
+
+binmode() should be called after open() but before any I/O is done on
+the filehandle.
+
+On many systems binmode() currently has no effect, but in future, it
+will be extended to support user-defined input and output disciplines.
+On some systems binmode() is necessary when you're not working with a
+text file. For the sake of portability it is a good idea to always use
+it when appropriate, and to never use it when it isn't appropriate.
+
+In other words: Regardless of platform, use binmode() on binary
+files, and do not use binmode() on text files.
+
+The C<open> pragma can be used to establish default disciplines.
+See L<open>.
The operating system, device drivers, C libraries, and Perl run-time
-system all conspire to let the programmer conveniently treat a
-simple, one-byte C<\n> as the line terminator, irrespective of its
-external representation. On Unix and its brethren, the native file
-representation exactly matches the internal representation, making
-everyone's lives unbelievably simpler. Consequently, L<binmode>
-has no effect under Unix, Plan9, or Mac OS, all of which use C<\n>
-to end each line. (Unix and Plan9 think C<\n> means C<\cJ> and
-C<\r> means C<\cM>, whereas the Mac goes the other way--it uses
-C<\cM> for c<\n> and C<\cJ> to mean C<\r>. But that's ok, because
-it's only one byte, and the internal and external representations
-match.)
-
-In legacy systems like MS-DOS and its embellishments, your program
-sees a C<\n> as a simple C<\cJ> (just as in Unix), but oddly enough,
-that's not what's physically stored on disk. What's worse, these
-systems refuse to help you with this; it's up to you to remember
-what to do. And you mustn't go applying binmode() with wild abandon,
-either, because if your system does care about binmode(), then using
-it when you shouldn't is just as perilous as failing to use it when
-you should.
-
-That means that on any version of Microsoft WinXX that you might
-care to name (or not), binmode() causes C<\cM\cJ> sequences on disk
-to be converted to C<\n> when read into your program, and causes
-any C<\n> in your program to be converted back to C<\cM\cJ> on
-output to disk. This sad discrepancy leads to no end of
-problems in not just the readline operator, but also when using
-seek(), tell(), and read() calls. See L<perlport> for other painful
-details. See the C<$/> and C<$\> variables in L<perlvar> for how
-to manually set your input and output line-termination sequences.
+system all work together to let the programmer treat a single
+character (C<\n>) as the line terminator, irrespective of the external
+representation. On many operating systems, the native text file
+representation matches the internal representation, but on some
+platforms the external representation of C<\n> is made up of more than
+one character.
+
+Mac OS, all variants of Unix, and Stream_LF files on VMS use a single
+character to end each line in the external representation of text (even
+though that single character is CARRIAGE RETURN on Mac OS and LINE FEED
+on Unix and most VMS files). Consequently binmode() has no effect on
+these operating systems. In other systems like OS/2, DOS and the various
+flavors of MS-Windows your program sees a C<\n> as a simple C<\cJ>, but
+what's stored in text files are the two characters C<\cM\cJ>. That means
+that, if you don't use binmode() on these systems, C<\cM\cJ> sequences on
+disk will be converted to C<\n> on input, and any C<\n> in your program
+will be converted back to C<\cM\cJ> on output. This is what you want for
+text files, but it can be disastrous for binary files.
+
+Another consequence of using binmode() (on some systems) is that
+special end-of-file markers will be seen as part of the data stream.
+For systems from the Microsoft family this means that if your binary
+data contains C<\cZ>, the I/O subsystem will regard it as the end of
+the file, unless you use binmode().
+
+binmode() is not only important for readline() and print() operations,
+but also when using read(), seek(), sysread(), syswrite() and tell()
+(see L<perlport> for more details). See the C<$/> and C<$\> variables
+in L<perlvar> for how to manually set your input and output
+line-termination sequences.
=item bless REF,CLASSNAME
to go back before the current one.
($package, $filename, $line, $subroutine, $hasargs,
- $wantarray, $evaltext, $is_require, $hints) = caller($i);
+ $wantarray, $evaltext, $is_require, $hints, $bitmask) = caller($i);
-Here $subroutine may be C<"(eval)"> if the frame is not a subroutine
+Here $subroutine may be C<(eval)> if the frame is not a subroutine
call, but an C<eval>. In such a case additional elements $evaltext and
C<$is_require> are set: C<$is_require> is true if the frame is created by a
C<require> or C<use> statement, $evaltext contains the text of the
-C<eval EXPR> statement. In particular, for a C<eval BLOCK> statement,
-$filename is C<"(eval)">, but $evaltext is undefined. (Note also that
+C<eval EXPR> statement. In particular, for an C<eval BLOCK> statement,
+$filename is C<(eval)>, but $evaltext is undefined. (Note also that
each C<use> statement creates a C<require> frame inside an C<eval EXPR>)
-frame. C<$hints> contains pragmatic hints that the caller was
-compiled with. It currently only reflects the hint corresponding to
-C<use utf8>.
+frame. C<$hasargs> is true if a new instance of C<@_> was set up for the
+frame. C<$hints> and C<$bitmask> contain pragmatic hints that the caller
+was compiled with. The C<$hints> and C<$bitmask> values are subject to
+change between versions of Perl, and are not meant for external use.
Furthermore, when called from within the DB package, caller returns more
detailed information: it sets the list variable C<@DB::args> to be the
Be aware that the optimizer might have optimized call frames away before
C<caller> had a chance to get the information. That means that C<caller(N)>
might not return information about the call frame you expect it do, for
-C<N E<gt> 1>. In particular, C<@DB::args> might have information from the
+C<< N > 1 >>. In particular, C<@DB::args> might have information from the
previous time C<caller> was called.
=item chdir EXPR
Changes the working directory to EXPR, if possible. If EXPR is omitted,
-changes to the user's home directory. Returns true upon success,
-false otherwise. See the example under C<die>.
+changes to the directory specified by C<$ENV{HOME}>, if set; if not,
+changes to the directory specified by C<$ENV{LOGDIR}>. If neither is
+set, C<chdir> does nothing. It returns true upon success, false
+otherwise. See the example under C<die>.
=item chmod LIST
$mode = '0644'; chmod oct($mode), 'foo'; # this is better
$mode = 0644; chmod $mode, 'foo'; # this is best
+You can also import the symbolic C<S_I*> constants from the Fcntl
+module:
+
+ use Fcntl ':mode';
+
+ chmod S_IRWXU|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH, @executables;
+ # This is identical to the chmod 0755 of the above example.
+
=item chomp VARIABLE
=item chomp LIST
mode (C<$/ = "">), it removes all trailing newlines from the string.
When in slurp mode (C<$/ = undef>) or fixed-length record mode (C<$/> is
a reference to an integer or the like, see L<perlvar>) chomp() won't
-remove anything.
+remove anything.
If VARIABLE is omitted, it chomps C<$_>. Example:
while (<>) {
# ...
}
+If VARIABLE is a hash, it chomps the hash's values, but not its keys.
+
You can actually chomp anything that's an lvalue, including an assignment:
chomp($cwd = `pwd`);
=item chop
Chops off the last character of a string and returns the character
-chopped. It's used primarily to remove the newline from the end of an
-input record, but is much more efficient than C<s/\n//> because it neither
+chopped. It is much more efficient than C<s/.$//s> because it neither
scans nor copies the string. If VARIABLE is omitted, chops C<$_>.
-Example:
-
- while (<>) {
- chop; # avoid \n on last field
- @array = split(/:/);
- #...
- }
+If VARIABLE is a hash, it chops the hash's values, but not its keys.
-You can actually chop anything that's an lvalue, including an assignment:
-
- chop($cwd = `pwd`);
- chop($answer = <STDIN>);
+You can actually chop anything that's an lvalue, including an assignment.
If you chop a list, each element is chopped. Only the value of the
last C<chop> is returned.
Returns the character represented by that NUMBER in the character set.
For example, C<chr(65)> is C<"A"> in either ASCII or Unicode, and
-chr(0x263a) is a Unicode smiley face (but only within the scope of
-a C<use utf8>). For the reverse, use L</ord>.
+chr(0x263a) is a Unicode smiley face. Within the scope of C<use utf8>,
+characters higher than 127 are encoded in Unicode; if you don't want
+this, temporarily C<use bytes> or use C<pack("C*",...)>
+
+For the reverse, use L</ord>.
See L<utf8> for more about Unicode.
If NUMBER is omitted, uses C<$_>.
This function works like the system call by the same name: it makes the
named directory the new root directory for all further pathnames that
-begin with a C<"/"> by your process and all its children. (It doesn't
+begin with a C</> by your process and all its children. (It doesn't
change your current working directory, which is unaffected.) For security
reasons, this call is restricted to the superuser. If FILENAME is
omitted, does a C<chroot> to C<$_>.
If the file handle came from a piped open C<close> will additionally
return false if one of the other system calls involved fails or if the
program exits with non-zero status. (If the only problem was that the
-program exited non-zero C<$!> will be set to C<0>.) Closing a pipe
+program exited non-zero C<$!> will be set to C<0>.) Closing a pipe
also waits for the process executing on the pipe to complete, in case you
-want to look at the output of the pipe afterwards, and
+want to look at the output of the pipe afterwards, and
implicitly puts the exit status value of that command into C<$?>.
Prematurely closing the read end of a pipe (i.e. before the process
=item cos EXPR
+=item cos
+
Returns the cosine of EXPR (expressed in radians). If EXPR is omitted,
takes cosine of C<$_>.
-For the inverse cosine operation, you may use the C<POSIX::acos()>
+For the inverse cosine operation, you may use the C<Math::Trig::acos()>
function, or use this relation:
sub acos { atan2( sqrt(1 - $_[0] * $_[0]), $_[0] ) }
You may also use C<defined(&func)> to check whether subroutine C<&func>
has ever been defined. The return value is unaffected by any forward
-declarations of C<&foo>.
+declarations of C<&foo>. Note that a subroutine which is not defined
+may still be callable: its package may have an C<AUTOLOAD> method that
+makes it spring into existence the first time that it is called -- see
+L<perlsub>.
Use of C<defined> on aggregates (hashes and arrays) is deprecated. It
used to report whether memory for that aggregate has ever been
=item delete EXPR
-Deletes the specified key(s) and their associated values from a hash.
-For each key, returns the deleted value associated with that key, or
-the undefined value if there was no such key. Deleting from C<$ENV{}>
-modifies the environment. Deleting from a hash tied to a DBM file
-deletes the entry from the DBM file. (But deleting from a C<tie>d hash
-doesn't necessarily return anything.)
+Given an expression that specifies a hash element, array element, hash slice,
+or array slice, deletes the specified element(s) from the hash or array.
+In the case of an array, if the array elements happen to be at the end,
+the size of the array will shrink to the highest element that tests
+true for exists() (or 0 if no such element exists).
+
+Returns each element so deleted or the undefined value if there was no such
+element. Deleting from C<$ENV{}> modifies the environment. Deleting from
+a hash tied to a DBM file deletes the entry from the DBM file. Deleting
+from a C<tie>d hash or array may not necessarily return anything.
+
+Deleting an array element effectively returns that position of the array
+to its initial, uninitialized state. Subsequently testing for the same
+element with exists() will return false. Note that deleting array
+elements in the middle of an array will not shift the index of the ones
+after them down--use splice() for that. See L</exists>.
-The following deletes all the values of a hash:
+The following (inefficiently) deletes all the values of %HASH and @ARRAY:
foreach $key (keys %HASH) {
delete $HASH{$key};
}
-And so does this:
+ foreach $index (0 .. $#ARRAY) {
+ delete $ARRAY[$index];
+ }
+
+And so do these:
- delete @HASH{keys %HASH}
+ delete @HASH{keys %HASH};
+
+ delete @ARRAY[0 .. $#ARRAY];
But both of these are slower than just assigning the empty list
-or undefining it:
+or undefining %HASH or @ARRAY:
+
+ %HASH = (); # completely empty %HASH
+ undef %HASH; # forget %HASH ever existed
- %hash = (); # completely empty %hash
- undef %hash; # forget %hash every existed
+ @ARRAY = (); # completely empty @ARRAY
+ undef @ARRAY; # forget @ARRAY ever existed
Note that the EXPR can be arbitrarily complicated as long as the final
-operation is a hash element lookup or hash slice:
+operation is a hash element, array element, hash slice, or array slice
+lookup:
delete $ref->[$x][$y]{$key};
delete @{$ref->[$x][$y]}{$key1, $key2, @morekeys};
+ delete $ref->[$x][$y][$index];
+ delete @{$ref->[$x][$y]}[$index1, $index2, @moreindices];
+
=item die LIST
Outside an C<eval>, prints the value of LIST to C<STDERR> and
exits with the current value of C<$!> (errno). If C<$!> is C<0>,
-exits with the value of C<($? E<gt>E<gt> 8)> (backtick `command`
-status). If C<($? E<gt>E<gt> 8)> is C<0>, exits with C<255>. Inside
+exits with the value of C<<< ($? >> 8) >>> (backtick `command`
+status). If C<<< ($? >> 8) >>> is C<0>, exits with C<255>. Inside
an C<eval(),> the error message is stuffed into C<$@> and the
C<eval> is terminated with the undefined value. This makes
C<die> the way to raise an exception.
die() can also be called with a reference argument. If this happens to be
trapped within an eval(), $@ contains the reference. This behavior permits
a more elaborate exception handling implementation using objects that
-maintain arbitary state about the nature of the exception. Such a scheme
+maintain arbitrary state about the nature of the exception. Such a scheme
is sometimes preferable to matching particular string values of $@ using
regular expressions. Here's an example:
as the first line of the handler (see L<perlvar/$^S>). Because
this promotes strange action at a distance, this counterintuitive
-behavior may be fixed in a future release.
+behavior may be fixed in a future release.
=item do BLOCK
is just like
- scalar eval `cat stat.pl`;
+ eval `cat stat.pl`;
except that it's more efficient and concise, keeps track of the current
filename for error messages, searches the @INC libraries, and updates
You might like to use C<do> to read in a program configuration
file. Manual error checking can be done this way:
- # read in config files: system first, then user
+ # read in config files: system first, then user
for $file ("/share/prog/defaults.rc",
- "$ENV{HOME}/.someprogrc")
+ "$ENV{HOME}/.someprogrc")
{
unless ($return = do $file) {
warn "couldn't parse $file: $@" if $@;
B<WARNING>: Any files opened at the time of the dump will I<not>
be open any more when the program is reincarnated, with possible
-resulting confusion on the part of Perl.
+resulting confusion on the part of Perl.
This function is now largely obsolete, partly because it's very
hard to convert a core file into an executable, and because the
you're just trying to accelerate a CGI script, consider using the
C<mod_perl> extension to B<Apache>, or the CPAN module, Fast::CGI.
You might also consider autoloading or selfloading, which at least
-make your program I<appear> to run faster.
+make your program I<appear> to run faster.
=item each HASH
When called in list context, returns a 2-element list consisting of the
key and value for the next element of a hash, so that you can iterate over
-it. When called in scalar context, returns the key for only the "next"
-element in the hash. (Note: Keys may be C<"0"> or C<"">, which are logically
-false; you may wish to avoid constructs like C<while ($k = each %foo) {}>
-for this reason.)
+it. When called in scalar context, returns only the key for the next
+element in the hash.
Entries are returned in an apparently random order. The actual random
order is subject to change in future versions of perl, but it is guaranteed
C<keys>, and C<values> function calls in the program; it can be reset by
reading all the elements from the hash, or by evaluating C<keys HASH> or
C<values HASH>. If you add or delete elements of a hash while you're
-iterating over it, you may get entries skipped or duplicated, so don't.
+iterating over it, you may get entries skipped or duplicated, so
+don't. Exception: It is always safe to delete the item most recently
+returned by C<each()>, which means that the following code will work:
+
+ while (($key, $value) = each %hash) {
+ print $key, "\n";
+ delete $hash{$key}; # This is safe
+ }
The following prints out your environment like the printenv(1) program,
only in a different order:
C<eof(FILEHANDLE)> on it) after end-of-file is reached. File types such
as terminals may lose the end-of-file condition if you do.
-An C<eof> without an argument uses the last file read as argument.
-Using C<eof()> with empty parentheses is very different. It indicates
-the pseudo file formed of the files listed on the command line,
-i.e., C<eof()> is reasonable to use inside a C<while (E<lt>E<gt>)>
-loop to detect the end of only the last file. Use C<eof(ARGV)> or
-C<eof> without the parentheses to test I<each> file in a while
-(E<lt>E<gt>) loop. Examples:
+An C<eof> without an argument uses the last file read. Using C<eof()>
+with empty parentheses is very different. It refers to the pseudo file
+formed from the files listed on the command line and accessed via the
+C<< <> >> operator. Since C<< <> >> isn't explicitly opened,
+as a normal filehandle is, an C<eof()> before C<< <> >> has been
+used will cause C<@ARGV> to be examined to determine if input is
+available.
+
+In a C<< while (<>) >> loop, C<eof> or C<eof(ARGV)> can be used to
+detect the end of each file, C<eof()> will only detect the end of the
+last file. Examples:
# reset line numbering on each input file
while (<>) {
- next if /^\s*#/; # skip comments
+ next if /^\s*#/; # skip comments
print "$.\t$_";
} continue {
close ARGV if eof; # Not eof()!
}
Practical hint: you almost never need to use C<eof> in Perl, because the
-input operators return false values when they run out of data, or if there
-was an error.
+input operators typically return C<undef> when they run out of data, or if
+there was an error.
=item eval EXPR
In the first form, the return value of EXPR is parsed and executed as if it
were a little Perl program. The value of the expression (which is itself
determined within scalar context) is first parsed, and if there weren't any
-errors, executed in the context of the current Perl program, so that any
-variable settings or subroutine and format definitions remain afterwards.
-Note that the value is parsed every time the eval executes. If EXPR is
-omitted, evaluates C<$_>. This form is typically used to delay parsing
-and subsequent execution of the text of EXPR until run time.
+errors, executed in the lexical context of the current Perl program, so
+that any variable settings or subroutine and format definitions remain
+afterwards. Note that the value is parsed every time the eval executes.
+If EXPR is omitted, evaluates C<$_>. This form is typically used to
+delay parsing and subsequent execution of the text of EXPR until run time.
In the second form, the code within the BLOCK is parsed only once--at the
same time the code surrounding the eval itself was parsed--and executed
the entire argument is passed to the system's command shell for parsing
(this is C</bin/sh -c> on Unix platforms, but varies on other platforms).
If there are no shell metacharacters in the argument, it is split into
-words and passed directly to C<execvp>, which is more efficient.
+words and passed directly to C<execvp>, which is more efficient.
Examples:
exec '/bin/echo', 'Your arguments are: ', @ARGV;
didn't--it tried to run a program literally called I<"echo surprise">,
didn't find it, and set C<$?> to a non-zero value indicating failure.
+Beginning with v5.6.0, Perl will attempt to flush all files opened for
+output before the exec, but this may not be supported on some platforms
+(see L<perlport>). To be safe, you may need to set C<$|> ($AUTOFLUSH
+in English) or call the C<autoflush()> method of C<IO::Handle> on any
+open handles in order to avoid lost output.
+
Note that C<exec> will not call your C<END> blocks, nor will it call
any C<DESTROY> methods in your objects.
=item exists EXPR
-Returns true if the specified hash key exists in its hash, even
-if the corresponding value is undefined.
+Given an expression that specifies a hash element or array element,
+returns true if the specified element in the hash or array has ever
+been initialized, even if the corresponding value is undefined. The
+element is not autovivified if it doesn't exist.
- print "Exists\n" if exists $array{$key};
- print "Defined\n" if defined $array{$key};
- print "True\n" if $array{$key};
+ print "Exists\n" if exists $hash{$key};
+ print "Defined\n" if defined $hash{$key};
+ print "True\n" if $hash{$key};
-A hash element can be true only if it's defined, and defined if
+ print "Exists\n" if exists $array[$index];
+ print "Defined\n" if defined $array[$index];
+ print "True\n" if $array[$index];
+
+A hash or array element can be true only if it's defined, and defined if
it exists, but the reverse doesn't necessarily hold true.
+Given an expression that specifies the name of a subroutine,
+returns true if the specified subroutine has ever been declared, even
+if it is undefined. Mentioning a subroutine name for exists or defined
+does not count as declaring it. Note that a subroutine which does not
+exist may still be callable: its package may have an C<AUTOLOAD>
+method that makes it spring into existence the first time that it is
+called -- see L<perlsub>.
+
+ print "Exists\n" if exists &subroutine;
+ print "Defined\n" if defined &subroutine;
+
Note that the EXPR can be arbitrarily complicated as long as the final
-operation is a hash key lookup:
+operation is a hash or array key lookup or subroutine name:
if (exists $ref->{A}->{B}->{$key}) { }
if (exists $hash{A}{B}{$key}) { }
-Although the last element will not spring into existence just because
-its existence was tested, intervening ones will. Thus C<$ref-E<gt>{"A"}>
-and C<$ref-E<gt>{"A"}-E<gt>{"B"}> will spring into existence due to the
-existence test for a $key element. This happens anywhere the arrow
-operator is used, including even
+ if (exists $ref->{A}->{B}->[$ix]) { }
+ if (exists $hash{A}{B}[$ix]) { }
+
+ if (exists &{$ref->{A}{B}{$key}}) { }
+
+Although the deepest nested array or hash will not spring into existence
+just because its existence was tested, any intervening ones will.
+Thus C<< $ref->{"A"} >> and C<< $ref->{"A"}->{"B"} >> will spring
+into existence due to the existence test for the $key element above.
+This happens anywhere the arrow operator is used, including even:
undef $ref;
if (exists $ref->{"Some key"}) { }
second--glance appear to be an lvalue context may be fixed in a future
release.
+See L<perlref/"Pseudo-hashes: Using an array as a hash"> for specifics
+on how exists() acts when used on a pseudo-hash.
+
+Use of a subroutine call, rather than a subroutine name, as an argument
+to exists() is an error.
+
+ exists ⊂ # OK
+ exists &sub(); # Error
+
=item exit EXPR
Evaluates EXPR and exits immediately with that value. Example:
=item exp
-Returns I<e> (the natural logarithm base) to the power of EXPR.
+Returns I<e> (the natural logarithm base) to the power of EXPR.
If EXPR is omitted, gives C<exp($_)>.
=item fcntl FILEHANDLE,FUNCTION,SCALAR
use Fcntl;
first to get the correct constant definitions. Argument processing and
-value return works just like C<ioctl> below.
+value return works just like C<ioctl> below.
For example:
use Fcntl;
or die "can't fcntl F_GETFL: $!";
You don't have to check for C<defined> on the return from C<fnctl>.
-Like C<ioctl>, it maps a C<0> return from the system call into C<"0
-but true"> in Perl. This string is true in boolean context and C<0>
+Like C<ioctl>, it maps a C<0> return from the system call into
+C<"0 but true"> in Perl. This string is true in boolean context and C<0>
in numeric context. It is also exempt from the normal B<-w> warnings
on improper numeric conversions.
If FILEHANDLE is an expression, the value is taken as an indirect
filehandle, generally its name.
-You can use this to find out whether two handles refer to the
+You can use this to find out whether two handles refer to the
same underlying descriptor:
if (fileno(THIS) == fileno(THAT)) {
print "THIS and THAT are dups\n";
- }
+ }
+
+(Filehandles connected to memory objects via new features of C<open> may
+return undefined even though they are open.)
+
=item flock FILEHANDLE,OPERATION
OPERATION is one of LOCK_SH, LOCK_EX, or LOCK_UN, possibly combined with
LOCK_NB. These constants are traditionally valued 1, 2, 8 and 4, but
-you can use the symbolic names if import them from the Fcntl module,
+you can use the symbolic names if you import them from the Fcntl module,
either individually, or as a group using the ':flock' tag. LOCK_SH
requests a shared lock, LOCK_EX requests an exclusive lock, and LOCK_UN
-releases a previously requested lock. If LOCK_NB is added to LOCK_SH or
-LOCK_EX then C<flock> will return immediately rather than blocking
+releases a previously requested lock. If LOCK_NB is bitwise-or'ed with
+LOCK_SH or LOCK_EX then C<flock> will return immediately rather than blocking
waiting for the lock (check the return status to see if you got it).
To avoid the possibility of miscoordination, Perl now flushes FILEHANDLE
example, using copy-on-write technology on data pages), making it the
dominant paradigm for multitasking over the last few decades.
-All files opened for output are flushed before forking the child process.
+Beginning with v5.6.0, Perl will attempt to flush all files opened for
+output before forking the child process, but this may not be supported
+on some platforms (see L<perlport>). To be safe, you may need to set
+C<$|> ($AUTOFLUSH in English) or call the C<autoflush()> method of
+C<IO::Handle> on any open handles in order to avoid duplicate output.
If you C<fork> without ever waiting on your children, you will
accumulate zombies. On some systems, you can avoid this by setting
(If the entry doesn't exist you get a null list.)
+The exact meaning of the $gcos field varies but it usually contains
+the real name of the user (as opposed to the login name) and other
+information pertaining to the user. Beware, however, that in many
+system users are able to change this information and therefore it
+cannot be trusted and therefore the $gcos is tainted (see
+L<perlsec>). The $passwd and $shell, user's encrypted password and
+login shell, are also tainted, because of the same reason.
+
In scalar context, you get the name, unless the function was a
lookup by name, in which case you get the other thing, whatever it is.
(If the entry doesn't exist you get the undefined value.) For example:
$name = getgrent();
#etc.
-In I<getpw*()> the fields $quota, $comment, and $expire are
-special cases in the sense that in many systems they are unsupported.
-If the $quota is unsupported, it is an empty scalar. If it is
-supported, it usually encodes the disk quota. If the $comment
-field is unsupported, it is an empty scalar. If it is supported it
-usually encodes some administrative comment about the user. In some
-systems the $quota field may be $change or $age, fields that have
-to do with password aging. In some systems the $comment field may
-be $class. The $expire field, if present, encodes the expiration
-period of the account or the password. For the availability and the
-exact meaning of these fields in your system, please consult your
-getpwnam(3) documentation and your F<pwd.h> file. You can also find
-out from within Perl what your $quota and $comment fields mean
-and whether you have the $expire field by using the C<Config> module
-and the values C<d_pwquota>, C<d_pwage>, C<d_pwchange>, C<d_pwcomment>,
-and C<d_pwexpire>. Shadow password files are only supported if your
-vendor has implemented them in the intuitive fashion that calling the
-regular C library routines gets the shadow versions if you're running
-under privilege. Those that incorrectly implement a separate library
-call are not supported.
+In I<getpw*()> the fields $quota, $comment, and $expire are special
+cases in the sense that in many systems they are unsupported. If the
+$quota is unsupported, it is an empty scalar. If it is supported, it
+usually encodes the disk quota. If the $comment field is unsupported,
+it is an empty scalar. If it is supported it usually encodes some
+administrative comment about the user. In some systems the $quota
+field may be $change or $age, fields that have to do with password
+aging. In some systems the $comment field may be $class. The $expire
+field, if present, encodes the expiration period of the account or the
+password. For the availability and the exact meaning of these fields
+in your system, please consult your getpwnam(3) documentation and your
+F<pwd.h> file. You can also find out from within Perl what your
+$quota and $comment fields mean and whether you have the $expire field
+by using the C<Config> module and the values C<d_pwquota>, C<d_pwage>,
+C<d_pwchange>, C<d_pwcomment>, and C<d_pwexpire>. Shadow password
+files are only supported if your vendor has implemented them in the
+intuitive fashion that calling the regular C library routines gets the
+shadow versions if you're running under privilege or if there exists
+the shadow(3) functions as found in System V ( this includes Solaris
+and Linux.) Those systems which implement a proprietary shadow password
+facility are unlikely to be supported.
The $members value returned by I<getgr*()> is a space separated list of
the login names of the members of the group.
use User::pwent;
$is_his = (stat($filename)->uid == pwent($whoever)->uid);
-Even though it looks like they're the same method calls (uid),
-they aren't, because a C<File::stat> object is different from
+Even though it looks like they're the same method calls (uid),
+they aren't, because a C<File::stat> object is different from
a C<User::pwent> object.
=item getsockname SOCKET
use Socket;
$mysockaddr = getsockname(SOCK);
($port, $myaddr) = sockaddr_in($mysockaddr);
- printf "Connect to %s [%s]\n",
+ printf "Connect to %s [%s]\n",
scalar gethostbyaddr($myaddr, AF_INET),
inet_ntoa($myaddr);
Returns the value of EXPR with filename expansions such as the
standard Unix shell F</bin/csh> would do. This is the internal function
-implementing the C<E<lt>*.cE<gt>> operator, but you can use it directly.
-If EXPR is omitted, C<$_> is used. The C<E<lt>*.cE<gt>> operator is
+implementing the C<< <*.c> >> operator, but you can use it directly.
+If EXPR is omitted, C<$_> is used. The C<< <*.c> >> operator is
discussed in more detail in L<perlop/"I/O Operators">.
+Beginning with v5.6.0, this operator is implemented using the standard
+C<File::Glob> extension. See L<File::Glob> for details.
+
=item gmtime EXPR
-Converts a time as returned by the time function to a 9-element list
+Converts a time as returned by the time function to a 8-element list
with the time localized for the standard Greenwich time zone.
Typically used as follows:
- # 0 1 2 3 4 5 6 7 8
- ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) =
+ # 0 1 2 3 4 5 6 7
+ ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday) =
gmtime(time);
-All list elements are numeric, and come straight out of a struct tm.
-In particular this means that $mon has the range C<0..11> and $wday
-has the range C<0..6> with sunday as day C<0>. Also, $year is the
-number of years since 1900, that is, $year is C<123> in year 2023,
-I<not> simply the last two digits of the year. If you assume it is,
-then you create non-Y2K-compliant programs--and you wouldn't want to do
-that, would you?
+All list elements are numeric, and come straight out of the C `struct
+tm'. $sec, $min, and $hour are the seconds, minutes, and hours of the
+specified time. $mday is the day of the month, and $mon is the month
+itself, in the range C<0..11> with 0 indicating January and 11
+indicating December. $year is the number of years since 1900. That
+is, $year is C<123> in year 2023. $wday is the day of the week, with
+0 indicating Sunday and 3 indicating Wednesday. $yday is the day of
+the year, in the range C<0..364> (or C<0..365> in leap years.)
+
+Note that the $year element is I<not> simply the last two digits of
+the year. If you assume it is, then you create non-Y2K-compliant
+programs--and you wouldn't want to do that, would you?
+
+The proper way to get a complete 4-digit year is simply:
+
+ $year += 1900;
-If EXPR is omitted, does C<gmtime(time())>.
+And to get the last two digits of the year (e.g., '01' in 2001) do:
-In scalar context, returns the ctime(3) value:
+ $year = sprintf("%02d", $year % 100);
+
+If EXPR is omitted, C<gmtime()> uses the current time (C<gmtime(time)>).
+
+In scalar context, C<gmtime()> returns the ctime(3) value:
$now_string = gmtime; # e.g., "Thu Oct 13 04:54:34 1994"
goto ("FOO", "BAR", "GLARCH")[$i];
-The C<goto-&NAME> form is highly magical, and substitutes a call to the
-named subroutine for the currently running subroutine. This is used by
-C<AUTOLOAD> subroutines that wish to load another subroutine and then
-pretend that the other subroutine had been called in the first place
-(except that any modifications to C<@_> in the current subroutine are
-propagated to the other subroutine.) After the C<goto>, not even C<caller>
-will be able to tell that this routine was called first.
+The C<goto-&NAME> form is quite different from the other forms of C<goto>.
+In fact, it isn't a goto in the normal sense at all, and doesn't have
+the stigma associated with other gotos. Instead, it
+substitutes a call to the named subroutine for the currently running
+subroutine. This is used by C<AUTOLOAD> subroutines that wish to load
+another subroutine and then pretend that the other subroutine had been
+called in the first place (except that any modifications to C<@_>
+in the current subroutine are propagated to the other subroutine.)
+After the C<goto>, not even C<caller> will be able to tell that this
+routine was called first.
+
+NAME needn't be the name of a subroutine; it can be a scalar variable
+containing a code reference, or a block which evaluates to a code
+reference.
=item grep BLOCK LIST
@foo = grep {!/^#/} @bar; # weed out comments
-Note that, because C<$_> is a reference into the list value, it can
-be used to modify the elements of the array. While this is useful and
-supported, it can cause bizarre results if the LIST is not a named array.
+Note that C<$_> is an alias to the list value, so it can be used to
+modify the elements of the LIST. While this is useful and supported,
+it can cause bizarre results if the elements of LIST are not variables.
Similarly, grep returns aliases into the original list, much as a for
loop's index variable aliases the list elements. That is, modifying an
element of a list returned by grep (for example, in a C<foreach>, C<map>
print hex 'aF'; # same
Hex strings may only represent integers. Strings that would cause
-integer overflow trigger a mandatory error message.
+integer overflow trigger a warning.
=item import
There is no builtin C<import> function. It is just an ordinary
method (subroutine) defined (or inherited) by modules that wish to export
names to another module. The C<use> function calls the C<import> method
-for the package used. See also L</use()>, L<perlmod>, and L<Exporter>.
+for the package used. See also L</use>, L<perlmod>, and L<Exporter>.
=item index STR,SUBSTR,POSITION
to get the correct function definitions. If F<ioctl.ph> doesn't
exist or doesn't have the correct definitions you'll have to roll your
-own, based on your C header files such as F<E<lt>sys/ioctl.hE<gt>>.
+own, based on your C header files such as F<< <sys/ioctl.h> >>.
(There is a Perl script called B<h2ph> that comes with the Perl kit that
may help you in this, but it's nontrivial.) SCALAR will be read and/or
written depending on the FUNCTION--a pointer to the string value of SCALAR
passed rather than a pointer to the string value. To guarantee this to be
true, add a C<0> to the scalar before using it.) The C<pack> and C<unpack>
functions may be needed to manipulate the values of structures used by
-C<ioctl>.
+C<ioctl>.
The return value of C<ioctl> (and C<fcntl>) is as follows:
@keys = keys %ENV;
@values = values %ENV;
- while (@keys) {
+ while (@keys) {
print pop(@keys), '=', pop(@values), "\n";
}
print $key, '=', $ENV{$key}, "\n";
}
+The returned values are copies of the original keys in the hash, so
+modifying them will not affect the original hash. Compare L</values>.
+
To sort a hash by value, you'll need to use a C<sort> function.
Here's a descending numeric sort of a hash by its values:
See also C<each>, C<values> and C<sort>.
-=item kill LIST
+=item kill SIGNAL, LIST
-Sends a signal to a list of processes. The first element of
-the list must be the signal to send. Returns the number of
+Sends a signal to a list of processes. Returns the number of
processes successfully signaled (which is not necessarily the
same as the number actually killed).
$cnt = kill 1, $child1, $child2;
kill 9, @goners;
-Unlike in the shell, in Perl if the I<SIGNAL> is negative, it kills
+If SIGNAL is zero, no signal is sent to the process. This is a
+useful way to check that the process is alive and hasn't changed
+its UID. See L<perlport> for notes on the portability of this
+construct.
+
+Unlike in the shell, if SIGNAL is negative, it kills
process groups instead of processes. (On System V, a negative I<PROCESS>
number will also kill process groups, but that's not portable.) That
means you usually want to use positive not negative signals. You may also
C<eval {}>, C<sub {}> or C<do {}>, and should not be used to exit
a grep() or map() operation.
+Note that a block by itself is semantically identical to a loop
+that executes once. Thus C<last> can be used to effect an early
+exit out of such a block.
+
See also L</continue> for an illustration of how C<last>, C<next>, and
C<redo> work.
=item length
Returns the length in characters of the value of EXPR. If EXPR is
-omitted, returns length of C<$_>. Note that this cannot be used on
+omitted, returns length of C<$_>. Note that this cannot be used on
an entire array or hash to find out how many elements these have.
For that, use C<scalar @array> and C<scalar keys %hash> respectively.
=item link OLDFILE,NEWFILE
Creates a new filename linked to the old filename. Returns true for
-success, false otherwise.
+success, false otherwise.
=item listen SOCKET,QUEUESIZE
Does the same thing that the listen system call does. Returns true if
-it succeeded, false otherwise. See the example in L<perlipc/"Sockets: Client/Server Communication">.
+it succeeded, false otherwise. See the example in
+L<perlipc/"Sockets: Client/Server Communication">.
=item local EXPR
You really probably want to be using C<my> instead, because C<local> isn't
-what most people think of as "local". See L<perlsub/"Private Variables
-via my()"> for details.
+what most people think of as "local". See
+L<perlsub/"Private Variables via my()"> for details.
A local modifies the listed variables to be local to the enclosing
block, file, or eval. If more than one value is listed, the list must
($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) =
localtime(time);
-All list elements are numeric, and come straight out of a struct tm.
-In particular this means that $mon has the range C<0..11> and $wday
-has the range C<0..6> with sunday as day C<0>. Also, $year is the
-number of years since 1900, that is, $year is C<123> in year 2023,
-and I<not> simply the last two digits of the year. If you assume it is,
-then you create non-Y2K-compliant programs--and you wouldn't want to do
-that, would you?
+All list elements are numeric, and come straight out of the C `struct
+tm'. $sec, $min, and $hour are the seconds, minutes, and hours of the
+specified time. $mday is the day of the month, and $mon is the month
+itself, in the range C<0..11> with 0 indicating January and 11
+indicating December. $year is the number of years since 1900. That
+is, $year is C<123> in year 2023. $wday is the day of the week, with
+0 indicating Sunday and 3 indicating Wednesday. $yday is the day of
+the year, in the range C<0..364> (or C<0..365> in leap years.) $isdst
+is true if the specified time occurs during daylight savings time,
+false otherwise.
-If EXPR is omitted, uses the current time (C<localtime(time)>).
+Note that the $year element is I<not> simply the last two digits of
+the year. If you assume it is, then you create non-Y2K-compliant
+programs--and you wouldn't want to do that, would you?
-In scalar context, returns the ctime(3) value:
+The proper way to get a complete 4-digit year is simply:
+
+ $year += 1900;
+
+And to get the last two digits of the year (e.g., '01' in 2001) do:
+
+ $year = sprintf("%02d", $year % 100);
+
+If EXPR is omitted, C<localtime()> uses the current time (C<localtime(time)>).
+
+In scalar context, C<localtime()> returns the ctime(3) value:
$now_string = localtime; # e.g., "Thu Oct 13 04:54:34 1994"
instead a Perl builtin. Also see the C<Time::Local> module
(to convert the second, minutes, hours, ... back to seconds since the
stroke of midnight the 1st of January 1970, the value returned by
-time()), and the strftime(3) and mktime(3) function available via the
+time()), and the strftime(3) and mktime(3) functions available via the
POSIX module. To get somewhat similar but locale dependent date
strings, set up your locale environment variables appropriately
(please see L<perllocale>) and try for example:
sub log10 {
my $n = shift;
return log($n)/log(10);
- }
+ }
See also L</exp> for the inverse operation.
-=item lstat FILEHANDLE
-
=item lstat EXPR
=item lstat
$hash{getkey($_)} = $_;
}
-Note that, because C<$_> is a reference into the list value, it can
-be used to modify the elements of the array. While this is useful and
-supported, it can cause bizarre results if the LIST is not a named array.
+Note that C<$_> is an alias to the list value, so it can be used to
+modify the elements of the LIST. While this is useful and supported,
+it can cause bizarre results if the elements of LIST are not variables.
Using a regular C<foreach> loop for this purpose would be clearer in
most cases. See also L</grep> for an array composed of those items of
the original list for which the BLOCK or EXPR evaluates to true.
+C<{> starts both hash references and blocks, so C<map { ...> could be either
+the start of map BLOCK LIST or map EXPR, LIST. Because perl doesn't look
+ahead for the closing C<}> it has to take a guess at which its dealing with
+based what it finds just after the C<{>. Usually it gets it right, but if it
+doesn't it won't realize something is wrong until it gets to the C<}> and
+encounters the missing (or unexpected) comma. The syntax error will be
+reported close to the C<}> but you'll need to change something near the C<{>
+such as using a unary C<+> to give perl some help:
+
+ %hash = map { "\L$_", 1 } @array # perl guesses EXPR. wrong
+ %hash = map { +"\L$_", 1 } @array # perl guesses BLOCK. right
+ %hash = map { ("\L$_", 1) } @array # this also works
+ %hash = map { lc($_), 1 } @array # as does this.
+ %hash = map +( lc($_), 1 ), @array # this is EXPR and works!
+
+ %hash = map ( lc($_), 1 ), @array # evaluates to (1, @array)
+
+or to force an anon hash constructor use C<+{>
+
+ @hashes = map +{ lc($_), 1 }, @array # EXPR, so needs , at end
+
+and you get list of anonymous hashes each with only 1 entry.
+
=item mkdir FILENAME,MASK
+=item mkdir FILENAME
+
Creates the directory specified by FILENAME, with permissions
specified by MASK (as modified by C<umask>). If it succeeds it
returns true, otherwise it returns false and sets C<$!> (errno).
+If omitted, MASK defaults to 0777.
In general, it is better to create directories with permissive MASK,
and let the user modify that with their C<umask>, than it is to supply
kept private (mail files, for instance). The perlfunc(1) entry on
C<umask> discusses the choice of MASK in more detail.
+Note that according to the POSIX 1003.1-1996 the FILENAME may have any
+number of trailing slashes. Some operating and filesystems do not get
+this right, so Perl automatically removes all trailing slashes to keep
+everyone happy.
+
=item msgctl ID,CMD,ARG
Calls the System V IPC function msgctl(2). You'll probably have to say
first to get the correct constant definitions. If CMD is C<IPC_STAT>,
then ARG must be a variable which will hold the returned C<msqid_ds>
-structure. Returns like C<ioctl>: the undefined value for error, C<"0 but
-true"> for zero, or the actual return value otherwise. See also
-C<IPC::SysV> and C<IPC::Semaphore> documentation.
+structure. Returns like C<ioctl>: the undefined value for error,
+C<"0 but true"> for zero, or the actual return value otherwise. See also
+L<perlipc/"SysV IPC">, C<IPC::SysV>, and C<IPC::Semaphore> documentation.
=item msgget KEY,FLAGS
Calls the System V IPC function msgget(2). Returns the message queue
-id, or the undefined value if there is an error. See also C<IPC::SysV>
-and C<IPC::Msg> documentation.
-
-=item msgsnd ID,MSG,FLAGS
-
-Calls the System V IPC function msgsnd to send the message MSG to the
-message queue ID. MSG must begin with the long integer message type,
-which may be created with C<pack("l", $type)>. Returns true if
-successful, or false if there is an error. See also C<IPC::SysV>
-and C<IPC::SysV::Msg> documentation.
+id, or the undefined value if there is an error. See also
+L<perlipc/"SysV IPC"> and C<IPC::SysV> and C<IPC::Msg> documentation.
=item msgrcv ID,VAR,SIZE,TYPE,FLAGS
Calls the System V IPC function msgrcv to receive a message from
message queue ID into variable VAR with a maximum message size of
-SIZE. Note that if a message is received, the message type will be
-the first thing in VAR, and the maximum length of VAR is SIZE plus the
-size of the message type. Returns true if successful, or false if
-there is an error. See also C<IPC::SysV> and C<IPC::SysV::Msg> documentation.
+SIZE. Note that when a message is received, the message type as a
+native long integer will be the first thing in VAR, followed by the
+actual message. This packing may be opened with C<unpack("l! a*")>.
+Taints the variable. Returns true if successful, or false if there is
+an error. See also L<perlipc/"SysV IPC">, C<IPC::SysV>, and
+C<IPC::SysV::Msg> documentation.
+
+=item msgsnd ID,MSG,FLAGS
+
+Calls the System V IPC function msgsnd to send the message MSG to the
+message queue ID. MSG must begin with the native long integer message
+type, and be followed by the length of the actual message, and finally
+the message itself. This kind of packing can be achieved with
+C<pack("l! a*", $type, $message)>. Returns true if successful,
+or false if there is an error. See also C<IPC::SysV>
+and C<IPC::SysV::Msg> documentation.
=item my EXPR
C<eval {}>, C<sub {}> or C<do {}>, and should not be used to exit
a grep() or map() operation.
+Note that a block by itself is semantically identical to a loop
+that executes once. Thus C<next> will exit such a block early.
+
See also L</continue> for an illustration of how C<last>, C<next>, and
C<redo> work.
automatically convert strings into numbers as needed, this automatic
conversion assumes base 10.)
+=item open FILEHANDLE,EXPR
+
=item open FILEHANDLE,MODE,EXPR
-=item open FILEHANDLE,EXPR
+=item open FILEHANDLE,MODE,EXPR,LIST
=item open FILEHANDLE
Opens the file whose filename is given by EXPR, and associates it with
-FILEHANDLE. If FILEHANDLE is an expression, its value is used as the
-name of the real filehandle wanted. If EXPR is omitted, the scalar
+FILEHANDLE. If FILEHANDLE is an undefined lexical (C<my>) variable the variable is
+assigned a reference to a new anonymous filehandle, otherwise if FILEHANDLE is an expression,
+its value is used as the name of the real filehandle wanted. (This is considered a symbolic
+reference, so C<use strict 'refs'> should I<not> be in effect.)
+
+If EXPR is omitted, the scalar
variable of the same name as the FILEHANDLE contains the filename.
(Note that lexical variables--those declared with C<my>--will not work
for this purpose; so if you're using C<my>, specify EXPR in your call
to open.) See L<perlopentut> for a kinder, gentler explanation of opening
files.
-If MODE is C<'E<lt>'> or nothing, the file is opened for input.
-If MODE is C<'E<gt>'>, the file is truncated and opened for
-output, being created if necessary. If MODE is C<'E<gt>E<gt>'>,
-the file is opened for appending, again being created if necessary.
-You can put a C<'+'> in front of the C<'E<gt>'> or C<'E<lt>'> to indicate that
-you want both read and write access to the file; thus C<'+E<lt>'> is almost
-always preferred for read/write updates--the C<'+E<gt>'> mode would clobber the
+If three or more arguments are specified then the mode of opening and the file name
+are separate. If MODE is C<< '<' >> or nothing, the file is opened for input.
+If MODE is C<< '>' >>, the file is truncated and opened for
+output, being created if necessary. If MODE is C<<< '>>' >>>,
+the file is opened for appending, again being created if necessary.
+You can put a C<'+'> in front of the C<< '>' >> or C<< '<' >> to indicate that
+you want both read and write access to the file; thus C<< '+<' >> is almost
+always preferred for read/write updates--the C<< '+>' >> mode would clobber the
file first. You can't usually use either read-write mode for updating
textfiles, since they have variable length records. See the B<-i>
switch in L<perlrun> for a better approach. The file is created with
permissions of C<0666> modified by the process' C<umask> value.
-These various prefixes correspond to the fopen(3) modes of C<'r'>, C<'r+'>, C<'w'>,
-C<'w+'>, C<'a'>, and C<'a+'>.
+These various prefixes correspond to the fopen(3) modes of C<'r'>, C<'r+'>,
+C<'w'>, C<'w+'>, C<'a'>, and C<'a+'>.
In the 2-arguments (and 1-argument) form of the call the mode and
filename should be concatenated (in this order), possibly separated by
-spaces. It is possible to omit the mode if the mode is C<'E<lt>'>.
+spaces. It is possible to omit the mode in these forms if the mode is
+C<< '<' >>.
If the filename begins with C<'|'>, the filename is interpreted as a
command to which output is to be piped, and if the filename ends with a
us. See L<perlipc/"Using open() for IPC">
for more examples of this. (You are not allowed to C<open> to a command
that pipes both in I<and> out, but see L<IPC::Open2>, L<IPC::Open3>,
-and L<perlipc/"Bidirectional Communication"> for alternatives.)
+and L<perlipc/"Bidirectional Communication with Another Process">
+for alternatives.)
-If MODE is C<'|-'>, the filename is interpreted as a
+For three or more arguments if MODE is C<'|-'>, the filename is interpreted as a
command to which output is to be piped, and if MODE is
C<'-|'>, the filename is interpreted as a command which pipes output to
us. In the 2-arguments (and 1-argument) form one should replace dash
(C<'-'>) with the command. See L<perlipc/"Using open() for IPC">
for more examples of this. (You are not allowed to C<open> to a command
that pipes both in I<and> out, but see L<IPC::Open2>, L<IPC::Open3>,
-and L<perlipc/"Bidirectional Communication"> for alternatives.)
+and L<perlipc/"Bidirectional Communication"> for alternatives.) In 3+ arg form of
+pipe opens then if LIST is specified (extra arguments after the command name) then
+LIST becomes arguments to the command invoked if the platform supports it.
+The meaning of C<open> with more than three arguments for non-pipe modes
+is not yet specified. Experimental "layers" may give extra LIST arguments meaning.
In the 2-arguments (and 1-argument) form opening C<'-'> opens STDIN
-and opening C<'E<gt>-'> opens STDOUT.
+and opening C<< '>-' >> opens STDOUT.
Open returns
nonzero upon success, the undefined value otherwise. If the C<open>
Plan9, which delimit lines with a single character, and which encode that
character in C as C<"\n">, do not need C<binmode>. The rest need it.
+In the three argument form MODE may also contain a list of IO "layers" (see L<open> and
+L<PerlIO> for more details) to be applied to the handle. This can be used to achieve the
+effect of C<binmode> as well as more complex behaviours.
+
When opening a file, it's usually a bad idea to continue normal execution
if the request failed, so C<open> is frequently used in connection with
C<die>. Even if C<die> won't do what you want (say, in a CGI script,
the return value from opening a file. The infrequent exception is when
working with an unopened filehandle is actually what you want to do.
+As a special case the 3 arg form with a read/write mode and the third argument
+being C<undef>:
+
+ open(TMP, "+>", undef) or die ...
+
+opens a filehandle to an anonymous temporary file.
+
+
Examples:
$ARTICLE = 100;
}
You may also, in the Bourne shell tradition, specify an EXPR beginning
-with C<'E<gt>&'>, in which case the rest of the string is interpreted as the
+with C<< '>&' >>, in which case the rest of the string is interpreted as the
name of a filehandle (or file descriptor, if numeric) to be
-duped and opened. You may use C<&> after C<E<gt>>, C<E<gt>E<gt>>,
-C<E<lt>>, C<+E<gt>>, C<+E<gt>E<gt>>, and C<+E<lt>>. The
+duped and opened. You may use C<&> after C<< > >>, C<<< >> >>>,
+C<< < >>, C<< +> >>, C<<< +>> >>>, and C<< +< >>. The
mode you specify should match the mode of the original filehandle.
(Duping a filehandle does not take into account any existing contents of
-stdio buffers.) Duping file handles is not yet supported for 3-argument
-open().
+stdio buffers.) If you use the 3 arg form then you can pass either a number,
+the name of a filehandle or the normal "reference to a glob".
Here is a script that saves, redirects, and restores STDOUT and
STDERR:
#!/usr/bin/perl
- open(OLDOUT, ">&STDOUT");
+ open(my $oldout, ">&", \*STDOUT);
open(OLDERR, ">&STDERR");
open(STDOUT, '>', "foo.out") || die "Can't redirect stdout";
print STDOUT "stdout 2\n";
print STDERR "stderr 2\n";
-If you specify C<'E<lt>&=N'>, where C<N> is a number, then Perl will do an
-equivalent of C's C<fdopen> of that file descriptor; this is more
-parsimonious of file descriptors. For example:
+If you specify C<< '<&=N' >>, where C<N> is a number, then Perl will
+do an equivalent of C's C<fdopen> of that file descriptor; this is
+more parsimonious of file descriptors. For example:
open(FILEHANDLE, "<&=$fd")
+or
+
+ open(FILEHANDLE, "<&=", $fd)
+
+Note that if Perl is using the standard C libraries' fdopen() then on
+many UNIX systems, fdopen() is known to fail when file descriptors
+exceed a certain value, typically 255. If you need more file
+descriptors than that, consider rebuilding Perl to use the C<PerlIO>.
+
+You can see whether Perl has been compiled with PerlIO or not by
+running C<perl -V> and looking for C<useperlio=> line. If C<useperlio>
+is C<define>, you have PerlIO, otherwise you don't.
+
If you open a pipe on the command C<'-'>, i.e., either C<'|-'> or C<'-|'>
with 2-arguments (or 1-argument) form of open(), then
there is an implicit fork done, and the return value of open is the pid
open(FOO, "|tr '[a-z]' '[A-Z]'");
open(FOO, '|-', "tr '[a-z]' '[A-Z]'");
open(FOO, '|-') || exec 'tr', '[a-z]', '[A-Z]';
+ open(FOO, '|-', "tr", '[a-z]', '[A-Z]');
open(FOO, "cat -n '$file'|");
open(FOO, '-|', "cat -n '$file'");
open(FOO, '-|') || exec 'cat', '-n', $file;
+ open(FOO, '-|', "cat", '-n', $file);
+
+The last example in each block shows the pipe as "list form", which is
+not yet supported on all platforms.
See L<perlipc/"Safe Pipe Opens"> for more examples of this.
-NOTE: On any operation that may do a fork, all files opened for output
-are flushed before the fork is attempted. On systems that support a
+Beginning with v5.6.0, Perl will attempt to flush all files opened for
+output before any operation that may do a fork, but this may not be
+supported on some platforms (see L<perlport>). To be safe, you may need
+to set C<$|> ($AUTOFLUSH in English) or call the C<autoflush()> method
+of C<IO::Handle> on any open handles.
+
+On systems that support a
close-on-exec flag on files, the flag will be set for the newly opened
file descriptor as determined by the value of $^F. See L<perlvar/$^F>.
The filename passed to 2-argument (or 1-argument) form of open()
will have leading and trailing
whitespace deleted, and the normal redirection characters
-honored. This property, known as "magic open",
+honored. This property, known as "magic open",
can often be used to good effect. A user could specify a filename of
F<"rsh cat file |">, or you could change certain filenames as needed:
$file =~ s#^(\s)#./$1#;
open(FOO, "< $file\0");
-(this may not work on some bizzare filesystems). One should
-conscientiously choose between the the I<magic> and 3-arguments form
+(this may not work on some bizarre filesystems). One should
+conscientiously choose between the I<magic> and 3-arguments form
of open():
open IN, $ARGV[0];
sysopen(HANDLE, $path, O_RDWR|O_CREAT|O_EXCL)
or die "sysopen $path: $!";
$oldfh = select(HANDLE); $| = 1; select($oldfh);
- print HANDLE "stuff $$\n");
+ print HANDLE "stuff $$\n";
seek(HANDLE, 0, 0);
print "File contains: ", <HANDLE>;
EXPR is omitted, uses C<$_>. For the reverse, see L</chr>.
See L<utf8> for more about Unicode.
+=item our EXPR
+
+=item our EXPR : ATTRIBUTES
+
+An C<our> declares the listed variables to be valid globals within
+the enclosing block, file, or C<eval>. That is, it has the same
+scoping rules as a "my" declaration, but does not create a local
+variable. If more than one value is listed, the list must be placed
+in parentheses. The C<our> declaration has no semantic effect unless
+"use strict vars" is in effect, in which case it lets you use the
+declared global variable without qualifying it with a package name.
+(But only within the lexical scope of the C<our> declaration. In this
+it differs from "use vars", which is package scoped.)
+
+An C<our> declaration declares a global variable that will be visible
+across its entire lexical scope, even across package boundaries. The
+package in which the variable is entered is determined at the point
+of the declaration, not at the point of use. This means the following
+behavior holds:
+
+ package Foo;
+ our $bar; # declares $Foo::bar for rest of lexical scope
+ $bar = 20;
+
+ package Bar;
+ print $bar; # prints 20
+
+Multiple C<our> declarations in the same lexical scope are allowed
+if they are in different packages. If they happened to be in the same
+package, Perl will emit warnings if you have asked for them.
+
+ use warnings;
+ package Foo;
+ our $bar; # declares $Foo::bar for rest of lexical scope
+ $bar = 20;
+
+ package Bar;
+ our $bar = 30; # declares $Bar::bar for rest of lexical scope
+ print $bar; # prints 30
+
+ our $bar; # emits warning
+
+An C<our> declaration may also have a list of attributes associated
+with it. B<WARNING>: This is an experimental feature that may be
+changed or removed in future releases of Perl. It should not be
+relied upon.
+
+The only currently recognized attribute is C<shared> which indicates
+that a single copy of the global is to be used by all interpreters
+should the program happen to be running in a multi-interpreter
+environment. (The default behaviour would be for each interpreter to
+have its own copy of the global.) In such an environment, this
+attribute also has the effect of making the global readonly.
+Examples:
+
+ our @EXPORT : shared = qw(foo);
+ our %EXPORT_TAGS : shared = (bar => [qw(aa bb cc)]);
+ our $VERSION : shared = "1.00";
+
+Multi-interpreter environments can come to being either through the
+fork() emulation on Windows platforms, or by embedding perl in a
+multi-threaded application. The C<shared> attribute does nothing in
+all other environments.
+
=item pack TEMPLATE,LIST
-Takes a list of values and packs it into a binary structure,
-returning the string containing the structure. The TEMPLATE is a
+Takes a LIST of values and converts it into a string using the rules
+given by the TEMPLATE. The resulting string is the concatenation of
+the converted values. Typically, each converted value looks
+like its machine-level representation. For example, on 32-bit machines
+a converted integer may be represented by a sequence of 4 bytes.
+
+The TEMPLATE is a
sequence of characters that give the order and type of values, as
follows:
a A string with arbitrary binary data, will be null padded.
- A An ascii string, will be space padded.
+ A An ASCII string, will be space padded.
Z A null terminated (asciz) string, will be null padded.
- b A bit string (ascending bit order, like vec()).
- B A bit string (descending bit order).
+ b A bit string (ascending bit order inside each byte, like vec()).
+ B A bit string (descending bit order inside each byte).
h A hex string (low nybble first).
H A hex string (high nybble first).
what a local C compiler calls 'long'. If you want
native-length longs, use the '!' suffix.)
- n A short in "network" (big-endian) order.
- N A long in "network" (big-endian) order.
- v A short in "VAX" (little-endian) order.
- V A long in "VAX" (little-endian) order.
+ n An unsigned short in "network" (big-endian) order.
+ N An unsigned long in "network" (big-endian) order.
+ v An unsigned short in "VAX" (little-endian) order.
+ V An unsigned long in "VAX" (little-endian) order.
(These 'shorts' and 'longs' are _exactly_ 16 bits and
_exactly_ 32 bits, respectively.)
=item *
Each letter may optionally be followed by a number giving a repeat
-count. With all types except C<"a">, C<"A">, C<"Z">, C<"b">, C<"B">, C<"h">,
-C<"H">, and C<"P"> the pack function will gobble up that many values from
+count. With all types except C<a>, C<A>, C<Z>, C<b>, C<B>, C<h>,
+C<H>, and C<P> the pack function will gobble up that many values from
the LIST. A C<*> for the repeat count means to use however many items are
-left.
+left, except for C<@>, C<x>, C<X>, where it is equivalent
+to C<0>, and C<u>, where it is equivalent to 1 (or 45, what is the
+same).
+
+When used with C<Z>, C<*> results in the addition of a trailing null
+byte (so the packed result will be one longer than the byte C<length>
+of the item).
+
+The repeat count for C<u> is interpreted as the maximal number of bytes
+to encode per line of output, with 0 and 1 replaced by 45.
=item *
-The C<"a">, C<"A">, and C<"Z"> types gobble just one value, but pack it as a
+The C<a>, C<A>, and C<Z> types gobble just one value, but pack it as a
string of length count, padding with nulls or spaces as necessary. When
-unpacking, C<"A"> strips trailing spaces and nulls, C<"Z"> strips everything
-after the first null, and C<"a"> returns data verbatim.
+unpacking, C<A> strips trailing spaces and nulls, C<Z> strips everything
+after the first null, and C<a> returns data verbatim. When packing,
+C<a>, and C<Z> are equivalent.
+
+If the value-to-pack is too long, it is truncated. If too long and an
+explicit count is provided, C<Z> packs only C<$count-1> bytes, followed
+by a null byte. Thus C<Z> always packs a trailing null byte under
+all circumstances.
=item *
-Likewise, the C<"b"> and C<"B"> fields pack a string that many bits long.
+Likewise, the C<b> and C<B> fields pack a string that many bits long.
+Each byte of the input field of pack() generates 1 bit of the result.
+Each result bit is based on the least-significant bit of the corresponding
+input byte, i.e., on C<ord($byte)%2>. In particular, bytes C<"0"> and
+C<"1"> generate bits 0 and 1, as do bytes C<"\0"> and C<"\1">.
+
+Starting from the beginning of the input string of pack(), each 8-tuple
+of bytes is converted to 1 byte of output. With format C<b>
+the first byte of the 8-tuple determines the least-significant bit of a
+byte, and with format C<B> it determines the most-significant bit of
+a byte.
+
+If the length of the input string is not exactly divisible by 8, the
+remainder is packed as if the input string were padded by null bytes
+at the end. Similarly, during unpack()ing the "extra" bits are ignored.
+
+If the input string of pack() is longer than needed, extra bytes are ignored.
+A C<*> for the repeat count of pack() means to use all the bytes of
+the input field. On unpack()ing the bits are converted to a string
+of C<"0">s and C<"1">s.
=item *
-The C<"h"> and C<"H"> fields pack a string that many nybbles (4-bit groups,
+The C<h> and C<H> fields pack a string that many nybbles (4-bit groups,
representable as hexadecimal digits, 0-9a-f) long.
+Each byte of the input field of pack() generates 4 bits of the result.
+For non-alphabetical bytes the result is based on the 4 least-significant
+bits of the input byte, i.e., on C<ord($byte)%16>. In particular,
+bytes C<"0"> and C<"1"> generate nybbles 0 and 1, as do bytes
+C<"\0"> and C<"\1">. For bytes C<"a".."f"> and C<"A".."F"> the result
+is compatible with the usual hexadecimal digits, so that C<"a"> and
+C<"A"> both generate the nybble C<0xa==10>. The result for bytes
+C<"g".."z"> and C<"G".."Z"> is not well-defined.
+
+Starting from the beginning of the input string of pack(), each pair
+of bytes is converted to 1 byte of output. With format C<h> the
+first byte of the pair determines the least-significant nybble of the
+output byte, and with format C<H> it determines the most-significant
+nybble.
+
+If the length of the input string is not even, it behaves as if padded
+by a null byte at the end. Similarly, during unpack()ing the "extra"
+nybbles are ignored.
+
+If the input string of pack() is longer than needed, extra bytes are ignored.
+A C<*> for the repeat count of pack() means to use all the bytes of
+the input field. On unpack()ing the bits are converted to a string
+of hexadecimal digits.
+
=item *
-The C<"p"> type packs a pointer to a null-terminated string. You are
+The C<p> type packs a pointer to a null-terminated string. You are
responsible for ensuring the string is not a temporary value (which can
potentially get deallocated before you get around to using the packed result).
-The C<"P"> type packs a pointer to a structure of the size indicated by the
-length. A NULL pointer is created if the corresponding value for C<"p"> or
-C<"P"> is C<undef>.
+The C<P> type packs a pointer to a structure of the size indicated by the
+length. A NULL pointer is created if the corresponding value for C<p> or
+C<P> is C<undef>, similarly for unpack().
=item *
-The C<"#"> character allows packing and unpacking of strings where the
-packed structure contains a byte count followed by the string itself.
-You write I<length-item>C<#>I<string-item>.
+The C</> template character allows packing and unpacking of strings where
+the packed structure contains a byte count followed by the string itself.
+You write I<length-item>C</>I<string-item>.
The I<length-item> can be any C<pack> template letter,
and describes how the length value is packed.
The ones likely to be of most use are integer-packing ones like
-C<"n"> (for Java strings), C<"w"> (for ASN.1 or SNMP)
-and C<"N"> (for Sun XDR).
+C<n> (for Java strings), C<w> (for ASN.1 or SNMP)
+and C<N> (for Sun XDR).
The I<string-item> must, at present, be C<"A*">, C<"a*"> or C<"Z*">.
For C<unpack> the length of the string is obtained from the I<length-item>,
but if you put in the '*' it will be ignored.
- unpack 'C#a', "\04Gurusamy"; gives 'Guru'
- unpack 'a3#A* A*', '007 Bond J '; gives (' Bond','J')
- pack 'n#a* w#a*','hello,','world'; gives "\000\006hello,\005world"
+ unpack 'C/a', "\04Gurusamy"; gives 'Guru'
+ unpack 'a3/A* A*', '007 Bond J '; gives (' Bond','J')
+ pack 'n/a* w/a*','hello,','world'; gives "\000\006hello,\005world"
The I<length-item> is not returned explicitly from C<unpack>.
-Adding a count to the I<length-item> letter
-is unlikely to do anything useful,
-unless that letter is C<"A">, C<"a"> or C<"Z">.
-Packing with a I<length-item> of C<"a"> or C<"Z">
-may introduce C<"\000"> characters,
+Adding a count to the I<length-item> letter is unlikely to do anything
+useful, unless that letter is C<A>, C<a> or C<Z>. Packing with a
+I<length-item> of C<a> or C<Z> may introduce C<"\000"> characters,
which Perl does not regard as legal in numeric strings.
=item *
-The integer types C<"s">, C<"S">, C<"l">, and C<"L"> may be
-immediately followed by a C<"!"> suffix to signify native shorts or
-longs--as you can see from above for example a bare C<"l"> does mean
+The integer types C<s>, C<S>, C<l>, and C<L> may be
+immediately followed by a C<!> suffix to signify native shorts or
+longs--as you can see from above for example a bare C<l> does mean
exactly 32 bits, the native C<long> (as seen by the local C compiler)
may be larger. This is an issue mainly in 64-bit platforms. You can
-see whether using C<"!"> makes any difference by
+see whether using C<!> makes any difference by
print length(pack("s")), " ", length(pack("s!")), "\n";
print length(pack("l")), " ", length(pack("l!")), "\n";
-C<"i!"> and C<"I!"> also work but only because of completeness;
-they are identical to C<"i"> and C<"I">.
+C<i!> and C<I!> also work but only because of completeness;
+they are identical to C<i> and C<I>.
The actual sizes (in bytes) of native shorts, ints, longs, and long
longs on the platform where Perl was built are also available via
print $Config{longlongsize}, "\n";
(The C<$Config{longlongsize}> will be undefine if your system does
-not support long longs.)
+not support long longs.)
=item *
-The integer formats C<"s">, C<"S">, C<"i">, C<"I">, C<"l">, and C<"L">
+The integer formats C<s>, C<S>, C<i>, C<I>, C<l>, and C<L>
are inherently non-portable between processors and operating systems
because they obey the native byteorder and endianness. For example a
-4-byte integer 0x12345678 (305419896 decimal) be ordered natively
+4-byte integer 0x12345678 (305419896 decimal) would be ordered natively
(arranged in and handled by the CPU registers) into bytes as
-
- 0x12 0x34 0x56 0x78 # little-endian
- 0x78 0x56 0x34 0x12 # big-endian
-
-Basically, the Intel, Alpha, and VAX CPUs and little-endian, while
-everybody else, for example Motorola m68k/88k, PPC, Sparc, HP PA,
-Power, and Cray are big-endian. MIPS can be either: Digital used it
-in little-endian mode; SGI uses it in big-endian mode.
+
+ 0x12 0x34 0x56 0x78 # big-endian
+ 0x78 0x56 0x34 0x12 # little-endian
+
+Basically, the Intel and VAX CPUs are little-endian, while everybody
+else, for example Motorola m68k/88k, PPC, Sparc, HP PA, Power, and
+Cray are big-endian. Alpha and MIPS can be either: Digital/Compaq
+used/uses them in little-endian mode; SGI/Cray uses them in big-endian
+mode.
The names `big-endian' and `little-endian' are comic references to
the classic "Gulliver's Travels" (via the paper "On Holy Wars and a
Plea for Peace" by Danny Cohen, USC/ISI IEN 137, April 1, 1980) and
the egg-eating habits of the Lilliputians.
-
+
Some systems may have even weirder byte orders such as
-
+
0x56 0x78 0x12 0x34
0x34 0x12 0x78 0x56
-
+
You can see your system's preference with
print join(" ", map { sprintf "%#02x", $_ }
Byteorders C<'1234'> and C<'12345678'> are little-endian, C<'4321'>
and C<'87654321'> are big-endian.
-If you want portable packed integers use the formats C<"n">, C<"N">,
-C<"v">, and C<"V">, their byte endianness and size is known.
+If you want portable packed integers use the formats C<n>, C<N>,
+C<v>, and C<V>, their byte endianness and size are known.
See also L<perlport>.
=item *
=item *
+If the pattern begins with a C<U>, the resulting string will be treated
+as Unicode-encoded. You can force UTF8 encoding on in a string with an
+initial C<U0>, and the bytes that follow will be interpreted as Unicode
+characters. If you don't want this to happen, you can begin your pattern
+with C<C0> (or anything else) to force Perl not to UTF8 encode your
+string, and then follow this with a C<U*> somewhere in your pattern.
+
+=item *
+
You must yourself do any alignment or padding by inserting for example
enough C<'x'>es while packing. There is no way to pack() and unpack()
could know where the bytes are going to or coming from. Therefore
C<pack> (and C<unpack>) handle their output and input as flat
sequences of bytes.
+=item *
+
+A comment in a TEMPLATE starts with C<#> and goes to the end of line.
+
+=item *
+
+If TEMPLATE requires more arguments to pack() than actually given, pack()
+assumes additional C<""> arguments. If TEMPLATE requires less arguments
+to pack() than actually given, extra arguments are ignored.
+
=back
Examples:
The same template may generally also be used in unpack().
-=item package
-
=item package NAMESPACE
+=item package
+
Declares the compilation unit as being in the given namespace. The scope
of the package declaration is from the declaration itself through the end
of the enclosing block, file, or eval (the same as the C<my> operator).
=item pos
Returns the offset of where the last C<m//g> search left off for the variable
-is in question (C<$_> is used when the variable is not specified). May be
+in question (C<$_> is used when the variable is not specified). May be
modified to change that offset. Such modification will also influence
the C<\G> zero-width assertion in regular expressions. See L<perlre> and
L<perlop>.
=item quotemeta
-Returns the value of EXPR with all non-alphanumeric
+Returns the value of EXPR with all non-"word"
characters backslashed. (That is, all characters not matching
C</[A-Za-z_0-9]/> will be preceded by a backslash in the
returned string, regardless of any locale settings.)
Returns a random fractional number greater than or equal to C<0> and less
than the value of EXPR. (EXPR should be positive.) If EXPR is
-omitted, the value C<1> is used. Automatically calls C<srand> unless
-C<srand> has already been called. See also C<srand>.
+omitted, or a C<0>, the value C<1> is used. Automatically calls C<srand>
+unless C<srand> has already been called. See also C<srand>.
+
+Apply C<int()> to the value returned by C<rand()> if you want random
+integers instead of random fractional numbers. For example,
+
+ int(rand(10))
+
+returns a random integer between C<0> and C<9>, inclusive.
(Note: If your rand function consistently returns numbers that are too
large or too small, then your version of Perl was probably compiled
=item read FILEHANDLE,SCALAR,LENGTH
Attempts to read LENGTH bytes of data into variable SCALAR from the
-specified FILEHANDLE. Returns the number of bytes actually read,
-C<0> at end of file, or undef if there was an error. SCALAR will be grown
-or shrunk to the length actually read. An OFFSET may be specified to
-place the read data at some other place than the beginning of the
-string. This call is actually implemented in terms of stdio's fread(3)
-call. To get a true read(2) system call, see C<sysread>.
+specified FILEHANDLE. Returns the number of bytes actually read, C<0>
+at end of file, or undef if there was an error. SCALAR will be grown
+or shrunk to the length actually read. If SCALAR needs growing, the
+new bytes will be zero bytes. An OFFSET may be specified to place
+the read data into some other place in SCALAR than the beginning.
+The call is actually implemented in terms of stdio's fread(3) call.
+To get a true read(2) system call, see C<sysread>.
=item readdir DIRHANDLE
context (i.e. file slurp mode), and when an empty file is read, it
returns C<''> the first time, followed by C<undef> subsequently.
-This is the internal function implementing the C<E<lt>EXPRE<gt>>
-operator, but you can use it directly. The C<E<lt>EXPRE<gt>>
+This is the internal function implementing the C<< <EXPR> >>
+operator, but you can use it directly. The C<< <EXPR> >>
operator is discussed in more detail in L<perlop/"I/O Operators">.
$line = <STDIN>;
=item recv SOCKET,SCALAR,LENGTH,FLAGS
Receives a message on a socket. Attempts to receive LENGTH bytes of
-data into variable SCALAR from the specified SOCKET filehandle.
-Actually does a C C<recvfrom>, so that it can return the address of the
-sender. Returns the undefined value if there's an error. SCALAR will
-be grown or shrunk to the length actually read. Takes the same flags
-as the system call of the same name.
-See L<perlipc/"UDP: Message Passing"> for examples.
+data into variable SCALAR from the specified SOCKET filehandle. SCALAR
+will be grown or shrunk to the length actually read. Takes the same
+flags as the system call of the same name. Returns the address of the
+sender if SOCKET's protocol supports this; returns an empty string
+otherwise. If there's an error, returns the undefined value. This call
+is actually implemented in terms of recvfrom(2) system call. See
+L<perlipc/"UDP: Message Passing"> for examples.
=item redo LABEL
C<eval {}>, C<sub {}> or C<do {}>, and should not be used to exit
a grep() or map() operation.
+Note that a block by itself is semantically identical to a loop
+that executes once. Thus C<redo> inside such a block will effectively
+turn it into a looping construct.
+
See also L</continue> for an illustration of how C<last>, C<next>, and
C<redo> work.
}
if (UNIVERSAL::isa($r, "HASH")) { # for subclassing
print "r is a reference to something that isa hash.\n";
- }
+ }
See also L<perlref>.
open files, or pre-existing files. Check L<perlport> and either the
rename(2) manpage or equivalent system documentation for details.
+=item require VERSION
+
=item require EXPR
=item require
Demands some semantics specified by EXPR, or by C<$_> if EXPR is not
-supplied. If EXPR is numeric, demands that the current version of Perl
-(C<$]> or $PERL_VERSION) be equal or greater than EXPR.
+supplied.
+
+If a VERSION is specified as a literal of the form v5.6.1,
+demands that the current version of Perl (C<$^V> or $PERL_VERSION) be
+at least as recent as that version, at run time. (For compatibility
+with older versions of Perl, a numeric argument will also be interpreted
+as VERSION.) Compare with L</use>, which can do a similar check at
+compile time.
+
+ require v5.6.1; # run time version check
+ require 5.6.1; # ditto
+ require 5.005_03; # float version allowed for compatibility
Otherwise, demands that a library file be included if it hasn't already
been included. The file is included via the do-FILE mechanism, which is
foreach $prefix (@INC) {
$realfilename = "$prefix/$filename";
if (-f $realfilename) {
+ $INC{$filename} = $realfilename;
$result = do $realfilename;
last ITER;
}
}
die "Can't find $filename in \@INC";
}
+ delete $INC{$filename} if $@ || !$result;
die $@ if $@;
die "$filename did not return true value" unless $result;
- $INC{$filename} = $realfilename;
return $result;
}
In other words, if you try this:
- require Foo::Bar; # a splendid bareword
+ require Foo::Bar; # a splendid bareword
-The require function will actually look for the "F<Foo/Bar.pm>" file in the
+The require function will actually look for the "F<Foo/Bar.pm>" file in the
directories specified in the C<@INC> array.
But if you try this:
#or
require "Foo::Bar"; # not a bareword because of the ""
-The require function will look for the "F<Foo::Bar>" file in the @INC array and
+The require function will look for the "F<Foo::Bar>" file in the @INC array and
will complain about not finding "F<Foo::Bar>" there. In this case you can do:
eval "require $class";
=item return
-Returns from a subroutine, C<eval>, or C<do FILE> with the value
+Returns from a subroutine, C<eval>, or C<do FILE> with the value
given in EXPR. Evaluation of EXPR may be in list, scalar, or void
context, depending on how the return value will be used, and the context
may vary from one execution to the next (see C<wantarray>). If no EXPR
POSITION, C<1> to set it to the current position plus POSITION, and
C<2> to set it to EOF plus POSITION (typically negative). For WHENCE
you may use the constants C<SEEK_SET>, C<SEEK_CUR>, and C<SEEK_END>
-(start of the file, current position, end of the file) from any of the
-modules Fcntl, C<IO::Seekable>, or POSIX. Returns C<1> upon success,
-C<0> otherwise.
+(start of the file, current position, end of the file) from the Fcntl
+module. Returns C<1> upon success, C<0> otherwise.
If you want to position file for C<sysread> or C<syswrite>, don't use
C<seek>--buffering makes its effect on the file's system position
EOF on your read, and then sleep for a while, you might have to stick in a
seek() to reset things. The C<seek> doesn't change the current position,
but it I<does> clear the end-of-file condition on the handle, so that the
-next C<E<lt>FILEE<gt>> makes Perl try again to read something. We hope.
+next C<< <FILE> >> makes Perl try again to read something. We hope.
If that doesn't work (some stdios are particularly cantankerous), then
you may need something more like this:
select(undef, undef, undef, 0.25);
B<WARNING>: One should not attempt to mix buffered I/O (like C<read>
-or E<lt>FHE<gt>) with C<select>, except as permitted by POSIX, and even
+or <FH>) with C<select>, except as permitted by POSIX, and even
then only on POSIX systems. You have to use C<sysread> instead.
=item semctl ID,SEMNUM,CMD,ARG
first to get the correct constant definitions. If CMD is IPC_STAT or
GETALL, then ARG must be a variable which will hold the returned
-semid_ds structure or semaphore value array. Returns like C<ioctl>: the
-undefined value for error, "C<0 but true>" for zero, or the actual return
-value otherwise. See also C<IPC::SysV> and C<IPC::Semaphore> documentation.
+semid_ds structure or semaphore value array. Returns like C<ioctl>:
+the undefined value for error, "C<0 but true>" for zero, or the actual
+return value otherwise. The ARG must consist of a vector of native
+short integers, which may be created with C<pack("s!",(0)x$nsem)>.
+See also L<perlipc/"SysV IPC">, C<IPC::SysV>, C<IPC::Semaphore>
+documentation.
=item semget KEY,NSEMS,FLAGS
Calls the System V IPC function semget. Returns the semaphore id, or
-the undefined value if there is an error. See also C<IPC::SysV> and
-C<IPC::SysV::Semaphore> documentation.
+the undefined value if there is an error. See also
+L<perlipc/"SysV IPC">, C<IPC::SysV>, C<IPC::SysV::Semaphore>
+documentation.
=item semop KEY,OPSTRING
$semop = pack("sss", $semnum, -1, 0);
die "Semaphore trouble: $!\n" unless semop($semid, $semop);
-To signal the semaphore, replace C<-1> with C<1>. See also C<IPC::SysV>
-and C<IPC::SysV::Semaphore> documentation.
+To signal the semaphore, replace C<-1> with C<1>. See also
+L<perlipc/"SysV IPC">, C<IPC::SysV>, and C<IPC::SysV::Semaphore>
+documentation.
=item send SOCKET,MSG,FLAGS,TO
Sets the current process group for the specified PID, C<0> for the current
process. Will produce a fatal error if used on a machine that doesn't
-implement setpgrp(2). If the arguments are omitted, it defaults to
-C<0,0>. Note that the POSIX version of C<setpgrp> does not accept any
-arguments, so only C<setpgrp(0,0)> is portable. See also C<POSIX::setsid()>.
+implement POSIX setpgid(2) or BSD setpgrp(2). If the arguments are omitted,
+it defaults to C<0,0>. Note that the BSD 4.2 version of C<setpgrp> does not
+accept any arguments, so only C<setpgrp(0,0)> is portable. See also
+C<POSIX::setsid()>.
=item setpriority WHICH,WHO,PRIORITY
array, returns the undefined value. If ARRAY is omitted, shifts the
C<@_> array within the lexical scope of subroutines and formats, and the
C<@ARGV> array at file scopes or within the lexical scopes established by
-the C<eval ''>, C<BEGIN {}>, C<END {}>, and C<INIT {}> constructs.
-See also C<unshift>, C<push>, and C<pop>. C<Shift()> and C<unshift> do the
+the C<eval ''>, C<BEGIN {}>, C<INIT {}>, C<CHECK {}>, and C<END {}>
+constructs.
+
+See also C<unshift>, C<push>, and C<pop>. C<shift> and C<unshift> do the
same thing to the left end of an array that C<pop> and C<push> do to the
right end.
then ARG must be a variable which will hold the returned C<shmid_ds>
structure. Returns like ioctl: the undefined value for error, "C<0> but
true" for zero, or the actual return value otherwise.
-See also C<IPC::SysV> documentation.
+See also L<perlipc/"SysV IPC"> and C<IPC::SysV> documentation.
=item shmget KEY,SIZE,FLAGS
Calls the System V IPC function shmget. Returns the shared memory
segment id, or the undefined value if there is an error.
-See also C<IPC::SysV> documentation.
+See also L<perlipc/"SysV IPC"> and C<IPC::SysV> documentation.
=item shmread ID,VAR,POS,SIZE
hold the data read. When writing, if STRING is too long, only SIZE
bytes are used; if STRING is too short, nulls are written to fill out
SIZE bytes. Return true if successful, or false if there is an error.
-See also C<IPC::SysV> documentation and the C<IPC::Shareable> module
-from CPAN.
+shmread() taints the variable. See also L<perlipc/"SysV IPC">,
+C<IPC::SysV> documentation, and the C<IPC::Shareable> module from CPAN.
=item shutdown SOCKET,HOW
This is useful with sockets when you want to tell the other
side you're done writing but not done reading, or vice versa.
-It's also a more insistent form of close because it also
+It's also a more insistent form of close because it also
disables the file descriptor in any forked copies in other
processes.
Returns the sine of EXPR (expressed in radians). If EXPR is omitted,
returns sine of C<$_>.
-For the inverse sine operation, you may use the C<POSIX::asin>
+For the inverse sine operation, you may use the C<Math::Trig::asin>
function, or use this relation:
sub asin { atan2($_[0], sqrt(1 - $_[0] * $_[0])) }
For delays of finer granularity than one second, you may use Perl's
C<syscall> interface to access setitimer(2) if your system supports
-it, or else see L</select> above. The Time::HiRes module from CPAN
-may also help.
+it, or else see L</select> above. The Time::HiRes module (from CPAN,
+and starting from Perl 5.8 part of the standard distribution) may also
+help.
+
+See also the POSIX module's C<pause> function.
+
+=item sockatmark SOCKET
+
+Returns true if the socket is positioned at the out-of-band mark
+(also known as the urgent data mark), false otherwise. Use right
+after reading from the socket.
+
+Not available directly, one has to import the function from
+the IO::Socket extension
+
+ use IO::Socket 'sockatmark';
-See also the POSIX module's C<sigpause> function.
+Even this doesn't guarantee that sockatmark() really is available,
+though, because sockatmark() is a relatively recent addition to
+the family of socket functions. If it is unavailable, attempt to
+use it will fail
+
+ IO::Socket::atmark not implemented on this architecture ...
+
+See also L<IO::Socket>.
=item socket SOCKET,DOMAIN,TYPE,PROTOCOL
to get the proper definitions imported. See the examples in
L<perlipc/"Sockets: Client/Server Communication">.
+On systems that support a close-on-exec flag on files, the flag will
+be set for the newly opened file descriptor, as determined by the
+value of $^F. See L<perlvar/$^F>.
+
=item socketpair SOCKET1,SOCKET2,DOMAIN,TYPE,PROTOCOL
Creates an unnamed pair of sockets in the specified domain, of the
for the system call of the same name. If unimplemented, yields a fatal
error. Returns true if successful.
+On systems that support a close-on-exec flag on files, the flag will
+be set for the newly opened file descriptors, as determined by the value
+of $^F. See L<perlvar/$^F>.
+
Some systems defined C<pipe> in terms of C<socketpair>, in which a call
to C<pipe(Rdr, Wtr)> is essentially:
is omitted, C<sort>s in standard string comparison order. If SUBNAME is
specified, it gives the name of a subroutine that returns an integer
less than, equal to, or greater than C<0>, depending on how the elements
-of the list are to be ordered. (The C<E<lt>=E<gt>> and C<cmp>
+of the list are to be ordered. (The C<< <=> >> and C<cmp>
operators are extremely useful in such routines.) SUBNAME may be a
scalar variable name (unsubscripted), in which case the value provides
the name of (or a reference to) the actual subroutine to use. In place
of a SUBNAME, you can provide a BLOCK as an anonymous, in-line sort
subroutine.
-In the interests of efficiency the normal calling code for subroutines is
-bypassed, with the following effects: the subroutine may not be a
-recursive subroutine, and the two elements to be compared are passed into
-the subroutine not via C<@_> but as the package global variables $a and
-$b (see example below). They are passed by reference, so don't
-modify $a and $b. And don't try to declare them as lexicals either.
+If the subroutine's prototype is C<($$)>, the elements to be compared
+are passed by reference in C<@_>, as for a normal subroutine. This is
+slower than unprototyped subroutines, where the elements to be
+compared are passed into the subroutine
+as the package global variables $a and $b (see example below). Note that
+in the latter case, it is usually counter-productive to declare $a and
+$b as lexicals.
+
+In either case, the subroutine may not be recursive. The values to be
+compared are always passed by reference, so don't modify them.
You also cannot exit out of the sort block or subroutine using any of the
loop control operators described in L<perlsyn> or with C<goto>.
When C<use locale> is in effect, C<sort LIST> sorts LIST according to the
current collation locale. See L<perllocale>.
+Perl does B<not> guarantee that sort is stable. (A I<stable> sort
+preserves the input order of elements that compare equal.) 5.7 and
+5.8 happen to use a stable mergesort, but 5.6 and earlier used quicksort,
+which is not stable. Do not assume that future perls will continue to
+use a stable sort.
+
Examples:
# sort lexically
$a->[2] cmp $b->[2]
} map { [$_, /=(\d+)/, uc($_)] } @old;
-If you're using strict, you I<must not> declare $a
-and $b as lexicals. They are package globals. That means
-if you're in the C<main> package, it's
+ # using a prototype allows you to use any comparison subroutine
+ # as a sort subroutine (including other package's subroutines)
+ package other;
+ sub backwards ($$) { $_[1] cmp $_[0]; } # $a and $b are not set here
- @articles = sort {$main::b <=> $main::a} @files;
+ package main;
+ @new = sort other::backwards @old;
-or just
+If you're using strict, you I<must not> declare $a
+and $b as lexicals. They are package globals. That means
+if you're in the C<main> package and type
- @articles = sort {$::b <=> $::a} @files;
+ @articles = sort {$b <=> $a} @files;
-but if you're in the C<FooPack> package, it's
+then C<$a> and C<$b> are C<$main::a> and C<$main::b> (or C<$::a> and C<$::b>),
+but if you're in the C<FooPack> package, it's the same as typing
@articles = sort {$FooPack::b <=> $FooPack::a} @files;
=item splice ARRAY,OFFSET
+=item splice ARRAY
+
Removes the elements designated by OFFSET and LENGTH from an array, and
replaces them with the elements of LIST, if any. In list context,
returns the elements removed from the array. In scalar context,
removed. The array grows or shrinks as necessary.
If OFFSET is negative then it starts that far from the end of the array.
If LENGTH is omitted, removes everything from OFFSET onward.
-If LENGTH is negative, leave that many elements off the end of the array.
+If LENGTH is negative, leaves that many elements off the end of the array.
+If both OFFSET and LENGTH are omitted, removes everything.
+
The following equivalences hold (assuming C<$[ == 0>):
push(@a,$x,$y) splice(@a,@a,0,$x,$y)
Splits a string into a list of strings and returns that list. By default,
empty leading fields are preserved, and empty trailing ones are deleted.
-If not in list context, returns the number of fields found and splits into
-the C<@_> array. (In list context, you can force the split into C<@_> by
-using C<??> as the pattern delimiters, but it still returns the list
-value.) The use of implicit split to C<@_> is deprecated, however, because
-it clobbers your subroutine arguments.
+In scalar context, returns the number of fields found and splits into
+the C<@_> array. Use of split in scalar context is deprecated, however,
+because it clobbers your subroutine arguments.
If EXPR is omitted, splits the C<$_> string. If PATTERN is also omitted,
splits on whitespace (after skipping any leading whitespace). Anything
matching PATTERN is taken to be a delimiter separating the fields. (Note
that the delimiter may be longer than one character.)
-If LIMIT is specified and positive, splits into no more than that
-many fields (though it may split into fewer). If LIMIT is unspecified
-or zero, trailing null fields are stripped (which potential users
-of C<pop> would do well to remember). If LIMIT is negative, it is
-treated as if an arbitrarily large LIMIT had been specified.
+If LIMIT is specified and positive, it represents the maximum number
+of fields the EXPR will be split into, though the actual number of
+fields returned depends on the number of times PATTERN matches within
+EXPR. If LIMIT is unspecified or zero, trailing null fields are
+stripped (which potential users of C<pop> would do well to remember).
+If LIMIT is negative, it is treated as if an arbitrarily large LIMIT
+had been specified. Note that splitting an EXPR that evaluates to the
+empty string always returns the empty list, regardless of the LIMIT
+specified.
A pattern matching the null string (not to be confused with
a null pattern C<//>, which is just one member of the set of patterns
produces the output 'h:i:t:h:e:r:e'.
+Empty leading (or trailing) fields are produced when there positive width
+matches at the beginning (or end) of the string; a zero-width match at the
+beginning (or end) of the string does not produce an empty field. For
+example:
+
+ print join(':', split(/(?=\w)/, 'hi there!'));
+
+produces the output 'h:i :t:h:e:r:e!'.
+
The LIMIT parameter can be used to split a line partially
($login, $passwd, $remainder) = split(/:/, $_, 3);
whitespace produces a null first field. A C<split> with no arguments
really does a C<split(' ', $_)> internally.
+A PATTERN of C</^/> is treated as if it were C</^/m>, since it isn't
+much use otherwise.
+
Example:
open(PASSWD, '/etc/passwd');
while (<PASSWD>) {
- ($login, $passwd, $uid, $gid,
+ chomp;
+ ($login, $passwd, $uid, $gid,
$gcos, $home, $shell) = split(/:/);
#...
}
-(Note that $shell above will still have a newline on it. See L</chop>,
-L</chomp>, and L</join>.)
=item sprintf FORMAT, LIST
-Returns a string formatted by the usual C<printf> conventions of the
-C library function C<sprintf>. See L<sprintf(3)> or L<printf(3)>
-on your system for an explanation of the general principles.
+Returns a string formatted by the usual C<printf> conventions of the C
+library function C<sprintf>. See below for more details
+and see L<sprintf(3)> or L<printf(3)> on your system for an explanation of
+the general principles.
+
+For example:
+
+ # Format number with up to 8 leading zeroes
+ $result = sprintf("%08d", $number);
+
+ # Round number to 3 digits after decimal point
+ $rounded = sprintf("%.3f", $number);
Perl does its own C<sprintf> formatting--it emulates the C
function C<sprintf>, but it doesn't use it (except for floating-point
result, any non-standard extensions in your local C<sprintf> are not
available from Perl.
+Unlike C<printf>, C<sprintf> does not do what you probably mean when you
+pass it an array as your first argument. The array is given scalar context,
+and instead of using the 0th element of the array as the format, Perl will
+use the count of elements in the array as the format, which is almost never
+useful.
+
Perl's C<sprintf> permits the following universally-known conversions:
%% a percent sign
%b an unsigned integer, in binary
%p a pointer (outputs the Perl value's address in hexadecimal)
%n special: *stores* the number of characters output so far
- into the next variable in the parameter list
+ into the next variable in the parameter list
Finally, for backward (and we do mean "backward") compatibility, Perl
permits these unnecessary but widely-supported conversions:
%O a synonym for %lo
%F a synonym for %f
+Note that the number of exponent digits in the scientific notation by
+C<%e>, C<%E>, C<%g> and C<%G> for numbers with the modulus of the
+exponent less than 100 is system-dependent: it may be three or less
+(zero-padded as necessary). In other words, 1.23 times ten to the
+99th may be either "1.23e99" or "1.23e099".
+
Perl permits the following universally-known flags between the C<%>
and the conversion letter:
h interpret integer as C type "short" or "unsigned short"
If no flags, interpret integer as C type "int" or "unsigned"
-There is also one Perl-specific flag:
+Perl supports parameter ordering, in other words, fetching the
+parameters in some explicitly specified "random" ordering as opposed
+to the default implicit sequential ordering. The syntax is, instead
+of the C<%> and C<*>, to use C<%>I<digits>C<$> and C<*>I<digits>C<$>,
+where the I<digits> is the wanted index, from one upwards. For example:
+
+ printf "%2\$d %1\$d\n", 12, 34; # will print "34 12\n"
+ printf "%*2\$d\n", 12, 3; # will print " 12\n"
+
+Note that using the reordering syntax does not interfere with the usual
+implicit sequential fetching of the parameters:
+
+ printf "%2\$d %d\n", 12, 34; # will print "34 12\n"
+ printf "%2\$d %d %d\n", 12, 34; # will print "34 12 34\n"
+ printf "%3\$d %d %d\n", 12, 34, 56; # will print "56 12 34\n"
+ printf "%2\$*3\$d %d\n", 12, 34, 3; # will print " 34 12\n"
+ printf "%*3\$2\$d %d\n", 12, 34, 3; # will print " 34 12\n"
+
+There are also two Perl-specific flags:
- V interpret integer as Perl's standard integer type
+ V interpret integer as Perl's standard integer type
+ v interpret string as a vector of integers, output as
+ numbers separated either by dots, or by an arbitrary
+ string received from the argument list when the flag
+ is preceded by C<*>
Where a number would appear in the flags, an asterisk (C<*>) may be
used instead, in which case Perl uses the next item in the parameter
If a field width obtained through C<*> is negative, it has the same
effect as the C<-> flag: left-justification.
+The C<v> flag is useful for displaying ordinal values of characters
+in arbitrary strings:
+
+ printf "version is v%vd\n", $^V; # Perl's version
+ printf "address is %*vX\n", ":", $addr; # IPv6 address
+ printf "bits are %*vb\n", " ", $bits; # random bitstring
+
If C<use locale> is in effect, the character used for the decimal
point in formatted real numbers is affected by the LC_NUMERIC locale.
See L<perllocale>.
-To cope with broken systems that allow the standard locales to be
-overridden by malicious users, the return value may be tainted
-if any of the floating point formats are used and the conversion
-yields something that doesn't look like a normal C-locale floating
-point number. This happens regardless of whether C<use locale> is
-in effect or not.
-
If Perl understands "quads" (64-bit integers) (this requires
-either that the platform natively supports quads or that Perl
-has been specifically compiled to support quads), the characters
+either that the platform natively support quads or that Perl
+be specifically compiled to support quads), the characters
d u o x X b i D U O
You can find out whether your Perl supports quads via L<Config>:
use Config;
- ($Config{use64bits} eq 'define' || $Config{longsize} == 8) &&
+ ($Config{use64bitint} eq 'define' || $Config{longsize} == 8) &&
print "quads\n";
If Perl understands "long doubles" (this requires that the platform
-supports long doubles), the flags
+support long doubles), the flags
e f g E F G
ID, among other things. In versions of Perl prior to 5.004 the default
seed was just the current C<time>. This isn't a particularly good seed,
so many old programs supply their own seed value (often C<time ^ $$> or
-C<time ^ ($$ + ($$ E<lt>E<lt> 15))>), but that isn't necessary any more.
+C<time ^ ($$ + ($$ << 15))>), but that isn't necessary any more.
In fact, it's usually not necessary to call C<srand> at all, because if
it is not called explicitly, it is called implicitly at the first use of
5 gid numeric group ID of file's owner
6 rdev the device identifier (special files only)
7 size total size of file, in bytes
- 8 atime last access time since the epoch
- 9 mtime last modify time since the epoch
- 10 ctime inode change time (NOT creation time!) since the epoch
+ 8 atime last access time in seconds since the epoch
+ 9 mtime last modify time in seconds since the epoch
+ 10 ctime inode change time (NOT creation time!) in seconds since the epoch
11 blksize preferred block size for file system I/O
12 blocks actual number of blocks allocated
print "$file is executable NFS file\n";
}
-(This works on machines only for which the device number is negative under NFS.)
+(This works on machines only for which the device number is negative
+under NFS.)
Because the mode contains both the file type and its permissions, you
-should mask off the file type portion and (s)printf using a C<"%o">
+should mask off the file type portion and (s)printf using a C<"%o">
if you want to see the real permissions.
$mode = (stat($filename))[2];
use File::stat;
$sb = stat($filename);
- printf "File is %s, size is %s, perm %04o, mtime %s\n",
+ printf "File is %s, size is %s, perm %04o, mtime %s\n",
$filename, $sb->size, $sb->mode & 07777,
scalar localtime $sb->mtime;
+You can import symbolic mode constants (C<S_IF*>) and functions
+(C<S_IS*>) from the Fcntl module:
+
+ use Fcntl ':mode';
+
+ $mode = (stat($filename))[2];
+
+ $user_rwx = ($mode & S_IRWXU) >> 6;
+ $group_read = ($mode & S_IRGRP) >> 3;
+ $other_execute = $mode & S_IXOTH;
+
+ printf "Permissions are %04o\n", S_ISMODE($mode), "\n";
+
+ $is_setuid = $mode & S_ISUID;
+ $is_setgid = S_ISDIR($mode);
+
+You could write the last two using the C<-u> and C<-d> operators.
+The commonly available S_IF* constants are
+
+ # Permissions: read, write, execute, for user, group, others.
+
+ S_IRWXU S_IRUSR S_IWUSR S_IXUSR
+ S_IRWXG S_IRGRP S_IWGRP S_IXGRP
+ S_IRWXO S_IROTH S_IWOTH S_IXOTH
+
+ # Setuid/Setgid/Stickiness.
+
+ S_ISUID S_ISGID S_ISVTX S_ISTXT
+
+ # File types. Not necessarily all are available on your system.
+
+ S_IFREG S_IFDIR S_IFLNK S_IFBLK S_ISCHR S_IFIFO S_IFSOCK S_IFWHT S_ENFMT
+
+ # The following are compatibility aliases for S_IRUSR, S_IWUSR, S_IXUSR.
+
+ S_IREAD S_IWRITE S_IEXEC
+
+and the S_IF* functions are
+
+ S_IFMODE($mode) the part of $mode containing the permission bits
+ and the setuid/setgid/sticky bits
+
+ S_IFMT($mode) the part of $mode containing the file type
+ which can be bit-anded with e.g. S_IFREG
+ or with the following functions
+
+ # The operators -f, -d, -l, -b, -c, -p, and -s.
+
+ S_ISREG($mode) S_ISDIR($mode) S_ISLNK($mode)
+ S_ISBLK($mode) S_ISCHR($mode) S_ISFIFO($mode) S_ISSOCK($mode)
+
+ # No direct -X operator counterpart, but for the first one
+ # the -g operator is often equivalent. The ENFMT stands for
+ # record flocking enforcement, a platform-dependent feature.
+
+ S_ISENFMT($mode) S_ISWHT($mode)
+
+See your native chmod(2) and stat(2) documentation for more details
+about the S_* constants.
+
=item study SCALAR
=item study
print;
}
-In searching for C</\bfoo\b/>, only those locations in C<$_> that contain C<"f">
-will be looked at, because C<"f"> is rarer than C<"o">. In general, this is
+In searching for C</\bfoo\b/>, only those locations in C<$_> that contain C<f>
+will be looked at, because C<f> is rarer than C<o>. In general, this is
a big win except in pathological cases. The only question is whether
it saves you more time than it took to build the linked list in the
first place.
There's a problem with C<syscall(&SYS_pipe)>: it returns the file
number of the read end of the pipe it creates. There is no way
-to retrieve the file number of the other end. You can avoid this
+to retrieve the file number of the other end. You can avoid this
problem by using C<pipe> instead.
=item sysopen FILEHANDLE,FILENAME,MODE
supported by perl: zero means read-only, one means write-only, and two
means read/write. We know that these values do I<not> work under
OS/390 & VM/ESA Unix and on the Macintosh; you probably don't want to
-se them in new code, use thhe constants discussed in the preceding
-paragraph.
+use them in new code.
If the file named by FILENAME does not exist and the C<open> call creates
it (typically because MODE includes the C<O_CREAT> flag), then the value of
Better to omit it. See the perlfunc(1) entry on C<umask> for more
on this.
+Note that C<sysopen> depends on the fdopen() C library function.
+On many UNIX systems, fdopen() is known to fail when file descriptors
+exceed a certain value, typically 255. If you need more file
+descriptors than that, consider rebuilding Perl to use the C<sfio>
+library, or perhaps using the POSIX::open() function.
+
See L<perlopentut> for a kinder, gentler explanation of opening files.
=item sysread FILEHANDLE,SCALAR,LENGTH,OFFSET
and C<2> to set it to EOF plus POSITION (typically negative). For
WHENCE, you may also use the constants C<SEEK_SET>, C<SEEK_CUR>, and
C<SEEK_END> (start of the file, current position, end of the file)
-from any of the modules Fcntl, C<IO::Seekable>, or POSIX.
+from the Fcntl module.
Returns the new position, or the undefined value on failure. A position
of zero is returned as the string C<"0 but true">; thus C<sysseek> returns
it is split into words and passed directly to C<execvp>, which is
more efficient.
-All files opened for output are flushed before attempting the exec().
+Beginning with v5.6.0, Perl will attempt to flush all files opened for
+output before any operation that may do a fork, but this may not be
+supported on some platforms (see L<perlport>). To be safe, you may need
+to set C<$|> ($AUTOFLUSH in English) or call the C<autoflush()> method
+of C<IO::Handle> on any open handles.
The return value is the exit status of the program as
returned by the C<wait> call. To get the actual exit value divide by
=item tell
-Returns the current position for FILEHANDLE. FILEHANDLE may be an
-expression whose value gives the name of the actual filehandle. If
-FILEHANDLE is omitted, assumes the file last read.
+Returns the current position for FILEHANDLE, or -1 on error. FILEHANDLE
+may be an expression whose value gives the name of the actual filehandle.
+If FILEHANDLE is omitted, assumes the file last read.
+
+The return value of tell() for the standard streams like the STDIN
+depends on the operating system: it may return -1 or something else.
+tell() on pipes, fifos, and sockets usually returns -1.
There is no C<systell> function. Use C<sysseek(FH, 0, 1)> for that.
FIRSTKEY this
NEXTKEY this, lastkey
DESTROY this
+ UNTIE this
A class implementing an ordinary array should have the following methods:
SPLICE this, offset, length, LIST
EXTEND this, count
DESTROY this
+ UNTIE this
A class implementing a file handle should have the following methods:
WRITE this, scalar, length, offset
PRINT this, LIST
PRINTF this, format, LIST
+ BINMODE this
+ EOF this
+ FILENO this
+ SEEK this, position, whence
+ TELL this
+ OPEN this, mode, LIST
CLOSE this
DESTROY this
+ UNTIE this
A class implementing a scalar should have the following methods:
FETCH this,
STORE this, value
DESTROY this
+ UNTIE this
Not all methods indicated above need be implemented. See L<perltie>,
L<Tie::Hash>, L<Tie::Array>, L<Tie::Scalar>, and L<Tie::Handle>.
=item unpack TEMPLATE,EXPR
C<unpack> does the reverse of C<pack>: it takes a string
-representing a structure and expands it out into a list of values.
+and expands it out into a list of values.
(In scalar context, it returns merely the first value produced.)
+
+The string is broken into chunks described by the TEMPLATE. Each chunk
+is converted separately to a value. Typically, either the string is a result
+of C<pack>, or the bytes of the string represent a C structure of some
+kind.
+
The TEMPLATE has the same format as in the C<pack> function.
Here's a subroutine that does substring:
sub ordinal { unpack("c",$_[0]); } # same as ord()
-In addition, you may prefix a field with a %E<lt>numberE<gt> to indicate that
-you want a E<lt>numberE<gt>-bit checksum of the items instead of the items
-themselves. Default is a 16-bit checksum. For example, the following
+In addition to fields allowed in pack(), you may prefix a field with
+a %<number> to indicate that
+you want a <number>-bit checksum of the items instead of the items
+themselves. Default is a 16-bit checksum. Checksum is calculated by
+summing numeric values of expanded values (for string fields the sum of
+C<ord($char)> is taken, for bit fields the sum of zeroes and ones).
+
+For example, the following
computes the same number as the System V sum program:
$checksum = do {
$setbits = unpack("%32b*", $selectmask);
-The C<"p"> and C<"P"> formats should be used with care. Since Perl
+The C<p> and C<P> formats should be used with care. Since Perl
has no way of checking whether the value passed to C<unpack()>
corresponds to a valid memory location, passing a pointer value that's
not known to be valid is likely to have disastrous consequences.
+If the repeat count of a field is larger than what the remainder of
+the input string allows, repeat count is decreased. If the input string
+is longer than one described by the TEMPLATE, the rest is ignored.
+
See L</pack> for more examples and notes.
=item untie VARIABLE
depending on how you look at it. Prepends list to the front of the
array, and returns the new number of elements in the array.
- unshift(ARGV, '-e') unless $ARGV[0] =~ /^-/;
+ unshift(@ARGV, '-e') unless $ARGV[0] =~ /^-/;
Note the LIST is prepended whole, not one element at a time, so the
prepended elements stay in the same order. Use C<reverse> to do the
reverse.
+=item use Module VERSION LIST
+
+=item use Module VERSION
+
=item use Module LIST
=item use Module
-=item use Module VERSION LIST
-
=item use VERSION
Imports some semantics into the current package from the named module,
except that Module I<must> be a bareword.
-If the first argument to C<use> is a number, it is treated as a version
-number instead of a module name. If the version of the Perl interpreter
-is less than VERSION, then an error message is printed and Perl exits
-immediately. This is often useful if you need to check the current
-Perl version before C<use>ing library modules that have changed in
-incompatible ways from older versions of Perl. (We try not to do
-this more than we have to.)
+VERSION, which can be specified as a literal of the form v5.6.1, demands
+that the current version of Perl (C<$^V> or $PERL_VERSION) be at least
+as recent as that version. (For compatibility with older versions of Perl,
+a numeric literal will also be interpreted as VERSION.) If the version
+of the running Perl interpreter is less than VERSION, then an error
+message is printed and Perl exits immediately without attempting to
+parse the rest of the file. Compare with L</require>, which can do a
+similar check at run time.
+
+ use v5.6.1; # compile time version check
+ use 5.6.1; # ditto
+ use 5.005_03; # float version allowed for compatibility
+
+This is often useful if you need to check the current Perl version before
+C<use>ing library modules that have changed in incompatible ways from
+older versions of Perl. (We try not to do this more than we have to.)
The C<BEGIN> forces the C<require> and C<import> to happen at compile time. The
C<require> makes sure the module is loaded into memory if it hasn't been
C<import> method any way it likes, though most modules just choose to
derive their C<import> method via inheritance from the C<Exporter> class that
is defined in the C<Exporter> module. See L<Exporter>. If no C<import>
-method can be found then the error is currently silently ignored. This
-may change to a fatal error in a future version.
+method can be found then the call is skipped.
-If you don't want your namespace altered, explicitly supply an empty list:
+If you do not want to call the package's C<import> method (for instance,
+to stop your namespace from being altered), explicitly supply the empty list:
use Module ();
If the VERSION argument is present between Module and LIST, then the
C<use> will call the VERSION method in class Module with the given
version as an argument. The default VERSION method, inherited from
-the Universal class, croaks if the given version is larger than the
-value of the variable C<$Module::VERSION>. (Note that there is not a
-comma after VERSION!)
+the UNIVERSAL class, croaks if the given version is larger than the
+value of the variable C<$Module::VERSION>.
+
+Again, there is a distinction between omitting LIST (C<import> called
+with no arguments) and an explicit empty LIST C<()> (C<import> not
+called). Note that there is no comma after VERSION!
Because this is a wide-open interface, pragmas (compiler directives)
are also implemented this way. Currently implemented pragmas are:
- use integer;
+ use constant;
use diagnostics;
+ use integer;
use sigtrap qw(SEGV BUS);
use strict qw(subs vars refs);
use subs qw(afunc blurfl);
If no C<unimport> method can be found the call fails with a fatal error.
-See L<perlmod> for a list of standard modules and pragmas.
+See L<perlmodlib> for a list of standard modules and pragmas. See L<perlrun>
+for the C<-M> and C<-m> command-line options to perl that give C<use>
+functionality from the command-line.
=item utime LIST
$now = time;
utime $now, $now, @ARGV;
+If the first two elements of the list are C<undef>, then the utime(2)
+function in the C library will be called with a null second argument.
+On most systems, this will set the file's access and modification
+times to the current time. (i.e. equivalent to the example above.)
+
+ utime undef, undef, @ARGV;
+
=item values HASH
Returns a list consisting of all the values of the named hash. (In a
be the same order as either the C<keys> or C<each> function would
produce on the same (unmodified) hash.
-Note that you cannot modify the values of a hash this way, because the
-returned list is just a copy. You need to use a hash slice for that,
-since it's lvaluable in a way that values() is not.
+Note that the values are not copied, which means modifying them will
+modify the contents of the hash:
- for (values %hash) { s/foo/bar/g } # FAILS!
- for (@hash{keys %hash}) { s/foo/bar/g } # ok
+ for (values %hash) { s/foo/bar/g } # modifies %hash values
+ for (@hash{keys %hash}) { s/foo/bar/g } # same
As a side effect, calling values() resets the HASH's internal iterator.
See also C<keys>, C<each>, and C<sort>.
=item vec EXPR,OFFSET,BITS
-Treats the string in EXPR as a vector of unsigned integers, and
-returns the value of the bit field specified by OFFSET. BITS
-specifies the number of bits that are reserved for each entry in the
-bit vector. This must be a power of two from 1 to 32 (or 64, if your
-platform supports that).
+Treats the string in EXPR as a bit vector made up of elements of
+width BITS, and returns the value of the element specified by OFFSET
+as an unsigned integer. BITS therefore specifies the number of bits
+that are reserved for each element in the bit vector. This must
+be a power of two from 1 to 32 (or 64, if your platform supports
+that).
+
+If BITS is 8, "elements" coincide with bytes of the input string.
+
+If BITS is 16 or more, bytes of the input string are grouped into chunks
+of size BITS/8, and each group is converted to a number as with
+pack()/unpack() with big-endian formats C<n>/C<N> (and analogously
+for BITS==64). See L<"pack"> for details.
+
+If bits is 4 or less, the string is broken into bytes, then the bits
+of each byte are broken into 8/BITS groups. Bits of a byte are
+numbered in a little-endian-ish way, as in C<0x01>, C<0x02>,
+C<0x04>, C<0x08>, C<0x10>, C<0x20>, C<0x40>, C<0x80>. For example,
+breaking the single input byte C<chr(0x36)> into two groups gives a list
+C<(0x6, 0x3)>; breaking it into 4 groups gives C<(0x2, 0x1, 0x3, 0x0)>.
C<vec> may also be assigned to, in which case parentheses are needed
to give the expression the correct precedence as in
vec($image, $max_x * $x + $y, 8) = 3;
-Vectors created with C<vec> can also be manipulated with the logical
-operators C<|>, C<&>, and C<^>, which will assume a bit vector
-operation is desired when both operands are strings.
+If the selected element is outside the string, the value 0 is returned.
+If an element off the end of the string is written to, Perl will first
+extend the string with sufficiently many zero bytes. It is an error
+to try to write off the beginning of the string (i.e. negative OFFSET).
+
+The string should not contain any character with the value > 255 (which
+can only happen if you're using UTF8 encoding). If it does, it will be
+treated as something which is not UTF8 encoded. When the C<vec> was
+assigned to, other parts of your program will also no longer consider the
+string to be UTF8 encoded. In other words, if you do have such characters
+in your string, vec() will operate on the actual byte string, and not the
+conceptual character string.
+
+Strings created with C<vec> can also be manipulated with the logical
+operators C<|>, C<&>, C<^>, and C<~>. These operators will assume a bit
+vector operation is desired when both operands are strings.
See L<perlop/"Bitwise String Operators">.
The following code will build up an ASCII string saying C<'PerlPerlPerl'>.
my $foo = '';
vec($foo, 0, 32) = 0x5065726C; # 'Perl'
+
+ # $foo eq "Perl" eq "\x50\x65\x72\x6C", 32 bits
+ print vec($foo, 0, 8); # prints 80 == 0x50 == ord('P')
+
vec($foo, 2, 16) = 0x5065; # 'PerlPe'
vec($foo, 3, 16) = 0x726C; # 'PerlPerl'
vec($foo, 8, 8) = 0x50; # 'PerlPerlP'
If you know the exact length in bits, it can be used in place of the C<*>.
+Here is an example to illustrate how the bits actually fall in place:
+
+ #!/usr/bin/perl -wl
+
+ print <<'EOT';
+ 0 1 2 3
+ unpack("V",$_) 01234567890123456789012345678901
+ ------------------------------------------------------------------
+ EOT
+
+ for $w (0..3) {
+ $width = 2**$w;
+ for ($shift=0; $shift < $width; ++$shift) {
+ for ($off=0; $off < 32/$width; ++$off) {
+ $str = pack("B*", "0"x32);
+ $bits = (1<<$shift);
+ vec($str, $off, $width) = $bits;
+ $res = unpack("b*",$str);
+ $val = unpack("V", $str);
+ write;
+ }
+ }
+ }
+
+ format STDOUT =
+ vec($_,@#,@#) = @<< == @######### @>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+ $off, $width, $bits, $val, $res
+ .
+ __END__
+
+Regardless of the machine architecture on which it is run, the above
+example should print the following table:
+
+ 0 1 2 3
+ unpack("V",$_) 01234567890123456789012345678901
+ ------------------------------------------------------------------
+ vec($_, 0, 1) = 1 == 1 10000000000000000000000000000000
+ vec($_, 1, 1) = 1 == 2 01000000000000000000000000000000
+ vec($_, 2, 1) = 1 == 4 00100000000000000000000000000000
+ vec($_, 3, 1) = 1 == 8 00010000000000000000000000000000
+ vec($_, 4, 1) = 1 == 16 00001000000000000000000000000000
+ vec($_, 5, 1) = 1 == 32 00000100000000000000000000000000
+ vec($_, 6, 1) = 1 == 64 00000010000000000000000000000000
+ vec($_, 7, 1) = 1 == 128 00000001000000000000000000000000
+ vec($_, 8, 1) = 1 == 256 00000000100000000000000000000000
+ vec($_, 9, 1) = 1 == 512 00000000010000000000000000000000
+ vec($_,10, 1) = 1 == 1024 00000000001000000000000000000000
+ vec($_,11, 1) = 1 == 2048 00000000000100000000000000000000
+ vec($_,12, 1) = 1 == 4096 00000000000010000000000000000000
+ vec($_,13, 1) = 1 == 8192 00000000000001000000000000000000
+ vec($_,14, 1) = 1 == 16384 00000000000000100000000000000000
+ vec($_,15, 1) = 1 == 32768 00000000000000010000000000000000
+ vec($_,16, 1) = 1 == 65536 00000000000000001000000000000000
+ vec($_,17, 1) = 1 == 131072 00000000000000000100000000000000
+ vec($_,18, 1) = 1 == 262144 00000000000000000010000000000000
+ vec($_,19, 1) = 1 == 524288 00000000000000000001000000000000
+ vec($_,20, 1) = 1 == 1048576 00000000000000000000100000000000
+ vec($_,21, 1) = 1 == 2097152 00000000000000000000010000000000
+ vec($_,22, 1) = 1 == 4194304 00000000000000000000001000000000
+ vec($_,23, 1) = 1 == 8388608 00000000000000000000000100000000
+ vec($_,24, 1) = 1 == 16777216 00000000000000000000000010000000
+ vec($_,25, 1) = 1 == 33554432 00000000000000000000000001000000
+ vec($_,26, 1) = 1 == 67108864 00000000000000000000000000100000
+ vec($_,27, 1) = 1 == 134217728 00000000000000000000000000010000
+ vec($_,28, 1) = 1 == 268435456 00000000000000000000000000001000
+ vec($_,29, 1) = 1 == 536870912 00000000000000000000000000000100
+ vec($_,30, 1) = 1 == 1073741824 00000000000000000000000000000010
+ vec($_,31, 1) = 1 == 2147483648 00000000000000000000000000000001
+ vec($_, 0, 2) = 1 == 1 10000000000000000000000000000000
+ vec($_, 1, 2) = 1 == 4 00100000000000000000000000000000
+ vec($_, 2, 2) = 1 == 16 00001000000000000000000000000000
+ vec($_, 3, 2) = 1 == 64 00000010000000000000000000000000
+ vec($_, 4, 2) = 1 == 256 00000000100000000000000000000000
+ vec($_, 5, 2) = 1 == 1024 00000000001000000000000000000000
+ vec($_, 6, 2) = 1 == 4096 00000000000010000000000000000000
+ vec($_, 7, 2) = 1 == 16384 00000000000000100000000000000000
+ vec($_, 8, 2) = 1 == 65536 00000000000000001000000000000000
+ vec($_, 9, 2) = 1 == 262144 00000000000000000010000000000000
+ vec($_,10, 2) = 1 == 1048576 00000000000000000000100000000000
+ vec($_,11, 2) = 1 == 4194304 00000000000000000000001000000000
+ vec($_,12, 2) = 1 == 16777216 00000000000000000000000010000000
+ vec($_,13, 2) = 1 == 67108864 00000000000000000000000000100000
+ vec($_,14, 2) = 1 == 268435456 00000000000000000000000000001000
+ vec($_,15, 2) = 1 == 1073741824 00000000000000000000000000000010
+ vec($_, 0, 2) = 2 == 2 01000000000000000000000000000000
+ vec($_, 1, 2) = 2 == 8 00010000000000000000000000000000
+ vec($_, 2, 2) = 2 == 32 00000100000000000000000000000000
+ vec($_, 3, 2) = 2 == 128 00000001000000000000000000000000
+ vec($_, 4, 2) = 2 == 512 00000000010000000000000000000000
+ vec($_, 5, 2) = 2 == 2048 00000000000100000000000000000000
+ vec($_, 6, 2) = 2 == 8192 00000000000001000000000000000000
+ vec($_, 7, 2) = 2 == 32768 00000000000000010000000000000000
+ vec($_, 8, 2) = 2 == 131072 00000000000000000100000000000000
+ vec($_, 9, 2) = 2 == 524288 00000000000000000001000000000000
+ vec($_,10, 2) = 2 == 2097152 00000000000000000000010000000000
+ vec($_,11, 2) = 2 == 8388608 00000000000000000000000100000000
+ vec($_,12, 2) = 2 == 33554432 00000000000000000000000001000000
+ vec($_,13, 2) = 2 == 134217728 00000000000000000000000000010000
+ vec($_,14, 2) = 2 == 536870912 00000000000000000000000000000100
+ vec($_,15, 2) = 2 == 2147483648 00000000000000000000000000000001
+ vec($_, 0, 4) = 1 == 1 10000000000000000000000000000000
+ vec($_, 1, 4) = 1 == 16 00001000000000000000000000000000
+ vec($_, 2, 4) = 1 == 256 00000000100000000000000000000000
+ vec($_, 3, 4) = 1 == 4096 00000000000010000000000000000000
+ vec($_, 4, 4) = 1 == 65536 00000000000000001000000000000000
+ vec($_, 5, 4) = 1 == 1048576 00000000000000000000100000000000
+ vec($_, 6, 4) = 1 == 16777216 00000000000000000000000010000000
+ vec($_, 7, 4) = 1 == 268435456 00000000000000000000000000001000
+ vec($_, 0, 4) = 2 == 2 01000000000000000000000000000000
+ vec($_, 1, 4) = 2 == 32 00000100000000000000000000000000
+ vec($_, 2, 4) = 2 == 512 00000000010000000000000000000000
+ vec($_, 3, 4) = 2 == 8192 00000000000001000000000000000000
+ vec($_, 4, 4) = 2 == 131072 00000000000000000100000000000000
+ vec($_, 5, 4) = 2 == 2097152 00000000000000000000010000000000
+ vec($_, 6, 4) = 2 == 33554432 00000000000000000000000001000000
+ vec($_, 7, 4) = 2 == 536870912 00000000000000000000000000000100
+ vec($_, 0, 4) = 4 == 4 00100000000000000000000000000000
+ vec($_, 1, 4) = 4 == 64 00000010000000000000000000000000
+ vec($_, 2, 4) = 4 == 1024 00000000001000000000000000000000
+ vec($_, 3, 4) = 4 == 16384 00000000000000100000000000000000
+ vec($_, 4, 4) = 4 == 262144 00000000000000000010000000000000
+ vec($_, 5, 4) = 4 == 4194304 00000000000000000000001000000000
+ vec($_, 6, 4) = 4 == 67108864 00000000000000000000000000100000
+ vec($_, 7, 4) = 4 == 1073741824 00000000000000000000000000000010
+ vec($_, 0, 4) = 8 == 8 00010000000000000000000000000000
+ vec($_, 1, 4) = 8 == 128 00000001000000000000000000000000
+ vec($_, 2, 4) = 8 == 2048 00000000000100000000000000000000
+ vec($_, 3, 4) = 8 == 32768 00000000000000010000000000000000
+ vec($_, 4, 4) = 8 == 524288 00000000000000000001000000000000
+ vec($_, 5, 4) = 8 == 8388608 00000000000000000000000100000000
+ vec($_, 6, 4) = 8 == 134217728 00000000000000000000000000010000
+ vec($_, 7, 4) = 8 == 2147483648 00000000000000000000000000000001
+ vec($_, 0, 8) = 1 == 1 10000000000000000000000000000000
+ vec($_, 1, 8) = 1 == 256 00000000100000000000000000000000
+ vec($_, 2, 8) = 1 == 65536 00000000000000001000000000000000
+ vec($_, 3, 8) = 1 == 16777216 00000000000000000000000010000000
+ vec($_, 0, 8) = 2 == 2 01000000000000000000000000000000
+ vec($_, 1, 8) = 2 == 512 00000000010000000000000000000000
+ vec($_, 2, 8) = 2 == 131072 00000000000000000100000000000000
+ vec($_, 3, 8) = 2 == 33554432 00000000000000000000000001000000
+ vec($_, 0, 8) = 4 == 4 00100000000000000000000000000000
+ vec($_, 1, 8) = 4 == 1024 00000000001000000000000000000000
+ vec($_, 2, 8) = 4 == 262144 00000000000000000010000000000000
+ vec($_, 3, 8) = 4 == 67108864 00000000000000000000000000100000
+ vec($_, 0, 8) = 8 == 8 00010000000000000000000000000000
+ vec($_, 1, 8) = 8 == 2048 00000000000100000000000000000000
+ vec($_, 2, 8) = 8 == 524288 00000000000000000001000000000000
+ vec($_, 3, 8) = 8 == 134217728 00000000000000000000000000010000
+ vec($_, 0, 8) = 16 == 16 00001000000000000000000000000000
+ vec($_, 1, 8) = 16 == 4096 00000000000010000000000000000000
+ vec($_, 2, 8) = 16 == 1048576 00000000000000000000100000000000
+ vec($_, 3, 8) = 16 == 268435456 00000000000000000000000000001000
+ vec($_, 0, 8) = 32 == 32 00000100000000000000000000000000
+ vec($_, 1, 8) = 32 == 8192 00000000000001000000000000000000
+ vec($_, 2, 8) = 32 == 2097152 00000000000000000000010000000000
+ vec($_, 3, 8) = 32 == 536870912 00000000000000000000000000000100
+ vec($_, 0, 8) = 64 == 64 00000010000000000000000000000000
+ vec($_, 1, 8) = 64 == 16384 00000000000000100000000000000000
+ vec($_, 2, 8) = 64 == 4194304 00000000000000000000001000000000
+ vec($_, 3, 8) = 64 == 1073741824 00000000000000000000000000000010
+ vec($_, 0, 8) = 128 == 128 00000001000000000000000000000000
+ vec($_, 1, 8) = 128 == 32768 00000000000000010000000000000000
+ vec($_, 2, 8) = 128 == 8388608 00000000000000000000000100000000
+ vec($_, 3, 8) = 128 == 2147483648 00000000000000000000000000000001
+
=item wait
Behaves like the wait(2) system call on your system: it waits for a child
use POSIX ":sys_wait_h";
#...
- do {
+ do {
$kid = waitpid(-1,&WNOHANG);
} until $kid == -1;