operations. In general, they do what you want, unless you want
consistency.
-An named array in scalar context is quite different from what would at
+A named array in scalar context is quite different from what would at
first glance appear to be a list in scalar context. You can't get a list
like C<(1,2,3)> into being in scalar context, because the compiler knows
the context at compile time. It would generate the scalar comma operator
-g File has setgid bit set.
-k File has sticky bit set.
- -T File is an ASCII text file.
+ -T File is an ASCII text file (heuristic guess).
-B File is a "binary" file (opposite of -T).
-M Age of file in days when script started.
text files. If FILEHANDLE is an expression, the value is taken as the
name of the filehandle. DISCIPLINE can be either of C<":raw"> for
binary mode or C<":crlf"> for "text" mode. If the DISCIPLINE is
-omitted, it defaults to C<":raw">.
+omitted, it defaults to C<":raw">. Returns true on success, C<undef> on
+failure.
binmode() should be called after open() but before any I/O is done on
the filehandle.
-On many systems binmode() currently has no effect, but in future, it
-will be extended to support user-defined input and output disciplines.
On some systems binmode() is necessary when you're not working with a
text file. For the sake of portability it is a good idea to always use
it when appropriate, and to never use it when it isn't appropriate.
platforms the external representation of C<\n> is made up of more than
one character.
-Mac OS, all variants of Unix, and Stream_LF files on VMS use a single
-character to end each line in the external representation of text (even
+Mac OS, all variants of Unix, and Stream_LF files on VMS use a single
+character to end each line in the external representation of text (even
though that single character is CARRIAGE RETURN on Mac OS and LINE FEED
-on Unix and most VMS files). Consequently binmode() has no effect on
-these operating systems. In other systems like OS/2, DOS and the various
-flavors of MS-Windows your program sees a C<\n> as a simple C<\cJ>, but
-what's stored in text files are the two characters C<\cM\cJ>. That means
-that, if you don't use binmode() on these systems, C<\cM\cJ> sequences on
-disk will be converted to C<\n> on input, and any C<\n> in your program
+on Unix and most VMS files). Consequently binmode() has no effect on
+these operating systems. In other systems like OS/2, DOS and the various
+flavors of MS-Windows your program sees a C<\n> as a simple C<\cJ>, but
+what's stored in text files are the two characters C<\cM\cJ>. That means
+that, if you don't use binmode() on these systems, C<\cM\cJ> sequences on
+disk will be converted to C<\n> on input, and any C<\n> in your program
will be converted back to C<\cM\cJ> on output. This is what you want for
text files, but it can be disastrous for binary files.
=item chdir EXPR
-Changes the working directory to EXPR, if possible. If EXPR is omitted,
+Changes the working directory to EXPR, if possible. If EXPR is omitted,
changes to the directory specified by C<$ENV{HOME}>, if set; if not,
-changes to the directory specified by C<$ENV{LOGDIR}>. If neither is
-set, C<chdir> does nothing. It returns true upon success, false
-otherwise. See the example under C<die>.
+changes to the directory specified by C<$ENV{LOGDIR}>. (Under VMS, the
+variable C<$ENV{SYS$LOGIN}> is also checked, and used if it is set.) If
+neither is set, C<chdir> does nothing. It returns true upon success,
+false otherwise. See the example under C<die>.
=item chmod LIST
Returns the character represented by that NUMBER in the character set.
For example, C<chr(65)> is C<"A"> in either ASCII or Unicode, and
-chr(0x263a) is a Unicode smiley face. Within the scope of C<use utf8>,
-characters higher than 127 are encoded in Unicode; if you don't want
-this, temporarily C<use bytes> or use C<pack("C*",...)>
+chr(0x263a) is a Unicode smiley face. Note that characters from 127
+to 255 (inclusive) are by default not encoded in Unicode for backward
+compatibility reasons (but see L<encoding>).
For the reverse, use L</ord>.
-See L<utf8> for more about Unicode.
+See L<perlunicode> and L<encoding> for more about Unicode.
If NUMBER is omitted, uses C<$_>.
the password file for lousy passwords, amongst other things. Only the
guys wearing white hats should do this.
-Note that C<crypt> is intended to be a one-way function, much like breaking
-eggs to make an omelette. There is no (known) corresponding decrypt
-function. As a result, this function isn't all that useful for
+Note that C<crypt> is intended to be a one-way function, much like
+breaking eggs to make an omelette. There is no (known) corresponding
+decrypt function (in other words, the crypt() is a one-way hash
+function). As a result, this function isn't all that useful for
cryptography. (For that, see your nearby CPAN mirror.)
-When verifying an existing encrypted string you should use the encrypted
-text as the salt (like C<crypt($plain, $crypted) eq $crypted>). This
-allows your code to work with the standard C<crypt> and with more
-exotic implementations. When choosing a new salt create a random two
-character string whose characters come from the set C<[./0-9A-Za-z]>
-(like C<join '', ('.', '/', 0..9, 'A'..'Z', 'a'..'z')[rand 64, rand 64]>).
+When verifying an existing encrypted string you should use the
+encrypted text as the salt (like C<crypt($plain, $crypted) eq
+$crypted>). This allows your code to work with the standard C<crypt>
+and with more exotic implementations. In other words, do not assume
+anything about the returned string itself, or how many bytes in
+the encrypted string matter.
+
+Traditionally the result is a string of 13 bytes: two first bytes of
+the salt, followed by 11 bytes from the set C<[./0-9A-Za-z]>, and only
+the first eight bytes of the encrypted string mattered, but
+alternative hashing schemes (like MD5), higher level security schemes
+(like C2), and implementations on non-UNIX platforms may produce
+different strings.
+
+When choosing a new salt create a random two character string whose
+characters come from the set C<[./0-9A-Za-z]> (like C<join '', ('.',
+'/', 0..9, 'A'..'Z', 'a'..'z')[rand 64, rand 64]>).
Here's an example that makes sure that whoever runs this program knows
their own password:
on your favorite CPAN mirror for a slew of potentially useful
modules.
+If using crypt() on a Unicode string (which potentially has
+characters with codepoints above 255), Perl tries to make sense of
+the situation by using only the low eight bits of the characters when
+calling crypt().
+
=item dbmclose HASH
[This function has been largely superseded by the C<untie> function.]
=item gmtime EXPR
-Converts a time as returned by the time function to a 8-element list
+Converts a time as returned by the time function to an 8-element list
with the time localized for the standard Greenwich time zone.
Typically used as follows:
print hex 'aF'; # same
Hex strings may only represent integers. Strings that would cause
-integer overflow trigger a warning.
+integer overflow trigger a warning. Leading whitespace is not stripped,
+unlike oct().
=item import
=item lc
-Returns an lowercased version of EXPR. This is the internal function
-implementing the C<\L> escape in double-quoted strings.
-Respects current LC_CTYPE locale if C<use locale> in force. See L<perllocale>
-and L<utf8>.
+Returns a lowercased version of EXPR. This is the internal function
+implementing the C<\L> escape in double-quoted strings. Respects
+current LC_CTYPE locale if C<use locale> in force. See L<perllocale>
+and L<perlunicode> for more details about locale and Unicode support.
If EXPR is omitted, uses C<$_>.
=item lcfirst
-Returns the value of EXPR with the first character lowercased. This is
-the internal function implementing the C<\l> escape in double-quoted strings.
-Respects current LC_CTYPE locale if C<use locale> in force. See L<perllocale>.
+Returns the value of EXPR with the first character lowercased. This
+is the internal function implementing the C<\l> escape in
+double-quoted strings. Respects current LC_CTYPE locale if C<use
+locale> in force. See L<perllocale> and L<perlunicode> for more
+details about locale and Unicode support.
If EXPR is omitted, uses C<$_>.
Interprets EXPR as an octal string and returns the corresponding
value. (If EXPR happens to start off with C<0x>, interprets it as a
hex string. If EXPR starts off with C<0b>, it is interpreted as a
-binary string.) The following will handle decimal, binary, octal, and
-hex in the standard Perl or C notation:
+binary string. Leading whitespace is ignored in all three cases.)
+The following will handle decimal, binary, octal, and hex in the standard
+Perl or C notation:
$val = oct($val) if $val =~ /^0/;
automatically convert strings into numbers as needed, this automatic
conversion assumes base 10.)
-=item open FILEHANDLE,MODE,LIST
-
=item open FILEHANDLE,EXPR
+=item open FILEHANDLE,MODE,EXPR
+
+=item open FILEHANDLE,MODE,EXPR,LIST
+
=item open FILEHANDLE
Opens the file whose filename is given by EXPR, and associates it with
-FILEHANDLE. If FILEHANDLE is an expression, its value is used as the
-name of the real filehandle wanted. (This is considered a symbolic
+FILEHANDLE. If FILEHANDLE is an undefined lexical (C<my>) variable the variable is
+assigned a reference to a new anonymous filehandle, otherwise if FILEHANDLE is an expression,
+its value is used as the name of the real filehandle wanted. (This is considered a symbolic
reference, so C<use strict 'refs'> should I<not> be in effect.)
If EXPR is omitted, the scalar
to open.) See L<perlopentut> for a kinder, gentler explanation of opening
files.
-If MODE is C<< '<' >> or nothing, the file is opened for input.
+If three or more arguments are specified then the mode of opening and the file name
+are separate. If MODE is C<< '<' >> or nothing, the file is opened for input.
If MODE is C<< '>' >>, the file is truncated and opened for
output, being created if necessary. If MODE is C<<< '>>' >>>,
the file is opened for appending, again being created if necessary.
In the 2-arguments (and 1-argument) form of the call the mode and
filename should be concatenated (in this order), possibly separated by
-spaces. It is possible to omit the mode if the mode is C<< '<' >>.
+spaces. It is possible to omit the mode in these forms if the mode is
+C<< '<' >>.
If the filename begins with C<'|'>, the filename is interpreted as a
command to which output is to be piped, and if the filename ends with a
and L<perlipc/"Bidirectional Communication with Another Process">
for alternatives.)
-If MODE is C<'|-'>, the filename is interpreted as a
+For three or more arguments if MODE is C<'|-'>, the filename is interpreted as a
command to which output is to be piped, and if MODE is
C<'-|'>, the filename is interpreted as a command which pipes output to
us. In the 2-arguments (and 1-argument) form one should replace dash
(C<'-'>) with the command. See L<perlipc/"Using open() for IPC">
for more examples of this. (You are not allowed to C<open> to a command
that pipes both in I<and> out, but see L<IPC::Open2>, L<IPC::Open3>,
-and L<perlipc/"Bidirectional Communication"> for alternatives.)
+and L<perlipc/"Bidirectional Communication"> for alternatives.) In 3+ arg form of
+pipe opens then if LIST is specified (extra arguments after the command name) then
+LIST becomes arguments to the command invoked if the platform supports it.
+The meaning of C<open> with more than three arguments for non-pipe modes
+is not yet specified. Experimental "layers" may give extra LIST arguments meaning.
In the 2-arguments (and 1-argument) form opening C<'-'> opens STDIN
and opening C<< '>-' >> opens STDOUT.
Plan9, which delimit lines with a single character, and which encode that
character in C as C<"\n">, do not need C<binmode>. The rest need it.
+In the three argument form MODE may also contain a list of IO "layers" (see L<open> and
+L<PerlIO> for more details) to be applied to the handle. This can be used to achieve the
+effect of C<binmode> as well as more complex behaviours.
+
When opening a file, it's usually a bad idea to continue normal execution
if the request failed, so C<open> is frequently used in connection with
C<die>. Even if C<die> won't do what you want (say, in a CGI script,
opens a filehandle to an anonymous temporary file.
+
Examples:
$ARTICLE = 100;
print STDOUT "stdout 2\n";
print STDERR "stderr 2\n";
-If you specify C<< '<&=N' >>, where C<N> is a number, then Perl will do an
-equivalent of C's C<fdopen> of that file descriptor; this is more
-parsimonious of file descriptors. For example:
+If you specify C<< '<&=N' >>, where C<N> is a number, then Perl will
+do an equivalent of C's C<fdopen> of that file descriptor; this is
+more parsimonious of file descriptors. For example:
open(FILEHANDLE, "<&=$fd")
+
or
+
open(FILEHANDLE, "<&=", $fd)
-Note that if perl is using the standard C libaries fdopen() then on many UNIX systems,
-fdopen() is known to fail when file descriptors
+Note that if Perl is using the standard C libraries' fdopen() then on
+many UNIX systems, fdopen() is known to fail when file descriptors
exceed a certain value, typically 255. If you need more file
descriptors than that, consider rebuilding Perl to use the C<PerlIO>.
+You can see whether Perl has been compiled with PerlIO or not by
+running C<perl -V> and looking for C<useperlio=> line. If C<useperlio>
+is C<define>, you have PerlIO, otherwise you don't.
+
If you open a pipe on the command C<'-'>, i.e., either C<'|-'> or C<'-|'>
with 2-arguments (or 1-argument) form of open(), then
there is an implicit fork done, and the return value of open is the pid
=item ord
-Returns the numeric (ASCII or Unicode) value of the first character of EXPR. If
-EXPR is omitted, uses C<$_>. For the reverse, see L</chr>.
-See L<utf8> for more about Unicode.
+Returns the numeric (the native 8-bit encoding, like ASCII or EBCDIC,
+or Unicode) value of the first character of EXPR. If EXPR is omitted,
+uses C<$_>.
+
+For the reverse, see L</chr>.
+See L<perlunicode> and L<encoding> for more about Unicode.
=item our EXPR
changed or removed in future releases of Perl. It should not be
relied upon.
-The only currently recognized attribute is C<shared> which indicates
+The only currently recognized attribute is C<unique> which indicates
that a single copy of the global is to be used by all interpreters
should the program happen to be running in a multi-interpreter
environment. (The default behaviour would be for each interpreter to
attribute also has the effect of making the global readonly.
Examples:
- our @EXPORT : shared = qw(foo);
- our %EXPORT_TAGS : shared = (bar => [qw(aa bb cc)]);
- our $VERSION : shared = "1.00";
+ our @EXPORT : unique = qw(foo);
+ our %EXPORT_TAGS : unique = (bar => [qw(aa bb cc)]);
+ our $VERSION : unique = "1.00";
Multi-interpreter environments can come to being either through the
fork() emulation on Windows platforms, or by embedding perl in a
-multi-threaded application. The C<shared> attribute does nothing in
+multi-threaded application. The C<unique> attribute does nothing in
all other environments.
=item pack TEMPLATE,LIST
follows:
a A string with arbitrary binary data, will be null padded.
- A An ASCII string, will be space padded.
- Z A null terminated (asciz) string, will be null padded.
+ A A text (ASCII) string, will be space padded.
+ Z A null terminated (ASCIZ) string, will be null padded.
b A bit string (ascending bit order inside each byte, like vec()).
B A bit string (descending bit order inside each byte).
P A pointer to a structure (fixed-length string).
u A uuencoded string.
- U A Unicode character number. Encodes to UTF-8 internally.
- Works even if C<use utf8> is not in effect.
+ U A Unicode character number. Encodes to UTF-8 internally
+ (or UTF-EBCDIC in EBCDIC platforms).
w A BER compressed integer. Its bytes represent an unsigned
integer in base 128, most significant digit first, with as
still seen in older code).
If NAMESPACE is omitted, then there is no current package, and all
-identifiers must be fully qualified or lexicals. This is stricter
-than C<use strict>, since it also extends to function names.
+identifiers must be fully qualified or lexicals. However, you are
+strongly advised not to make use of this feature. Its use can cause
+unexpected behaviour, even crashing some versions of Perl. It is
+deprecated, and will be removed from a future release.
See L<perlmod/"Packages"> for more information about packages, modules,
and classes. See L<perlsub> for other scoping issues.
Equivalent to C<print FILEHANDLE sprintf(FORMAT, LIST)>, except that C<$\>
(the output record separator) is not appended. The first argument
-of the list will be interpreted as the C<printf> format. If C<use locale> is
-in effect, the character used for the decimal point in formatted real numbers
-is affected by the LC_NUMERIC locale. See L<perllocale>.
+of the list will be interpreted as the C<printf> format. See C<sprintf>
+for an explanation of the format argument. If C<use locale> is in effect,
+the character used for the decimal point in formatted real numbers is
+affected by the LC_NUMERIC locale. See L<perllocale>.
Don't fall into the trap of using a C<printf> when a simple
C<print> would do. The C<print> is more efficient and less
Returns a random fractional number greater than or equal to C<0> and less
than the value of EXPR. (EXPR should be positive.) If EXPR is
-omitted, or a C<0>, the value C<1> is used. Automatically calls C<srand>
+omitted, or a C<0>, the value C<1> is used. Automatically calls C<srand>
unless C<srand> has already been called. See also C<srand>.
Apply C<int()> to the value returned by C<rand()> if you want random
=item require
-Demands some semantics specified by EXPR, or by C<$_> if EXPR is not
-supplied.
+Demands a version of Perl specified by VERSION, or demands some semantics
+specified by EXPR or by C<$_> if EXPR is not supplied.
+
+VERSION may be either a numeric argument such as 5.006, which will be
+compared to C<$]>, or a literal of the form v5.6.1, which will be compared
+to C<$^V> (aka $PERL_VERSION). A fatal error is produced at run time if
+VERSION is greater than the version of the current Perl interpreter.
+Compare with L</use>, which can do a similar check at compile time.
-If a VERSION is specified as a literal of the form v5.6.1,
-demands that the current version of Perl (C<$^V> or $PERL_VERSION) be
-at least as recent as that version, at run time. (For compatibility
-with older versions of Perl, a numeric argument will also be interpreted
-as VERSION.) Compare with L</use>, which can do a similar check at
-compile time.
+Specifying VERSION as a literal of the form v5.6.1 should generally be
+avoided, because it leads to misleading error messages under earlier
+versions of Perl which do not support this syntax. The equivalent numeric
+version should be used instead.
require v5.6.1; # run time version check
require 5.6.1; # ditto
- require 5.005_03; # float version allowed for compatibility
+ require 5.006_001; # ditto; preferred for backwards compatibility
Otherwise, demands that a library file be included if it hasn't already
been included. The file is included via the do-FILE mechanism, which is
eval "require $class";
+You can also insert hooks into the import facility, by putting directly
+Perl code into the @INC array. There are three forms of hooks: subroutine
+references, array references and blessed objects.
+
+Subroutine references are the simplest case. When the inclusion system
+walks through @INC and encounters a subroutine, this subroutine gets
+called with two parameters, the first being a reference to itself, and the
+second the name of the file to be included (e.g. "F<Foo/Bar.pm>"). The
+subroutine should return C<undef> or a filehandle, from which the file to
+include will be read. If C<undef> is returned, C<require> will look at
+the remaining elements of @INC.
+
+If the hook is an array reference, its first element must be a subroutine
+reference. This subroutine is called as above, but the first parameter is
+the array reference. This enables to pass indirectly some arguments to
+the subroutine.
+
+In other words, you can write:
+
+ push @INC, \&my_sub;
+ sub my_sub {
+ my ($coderef, $filename) = @_; # $coderef is \&my_sub
+ ...
+ }
+
+or:
+
+ push @INC, [ \&my_sub, $x, $y, ... ];
+ sub my_sub {
+ my ($arrayref, $filename) = @_;
+ # Retrieve $x, $y, ...
+ my @parameters = @$arrayref[1..$#$arrayref];
+ ...
+ }
+
+If the hook is an object, it must provide an INC method, that will be
+called as above, the first parameter being the object itself. (Note that
+you must fully qualify the sub's name, as it is always forced into package
+C<main>.) Here is a typical code layout:
+
+ # In Foo.pm
+ package Foo;
+ sub new { ... }
+ sub Foo::INC {
+ my ($self, $filename) = @_;
+ ...
+ }
+
+ # In the main program
+ push @INC, new Foo(...);
+
+Note that these hooks are also permitted to set the %INC entry
+corresponding to the files they have loaded. See L<perlvar/%INC>.
+
For a yet-more-powerful import facility, see L</use> and L<perlmod>.
=item reset EXPR
is given, returns an empty list in list context, the undefined value in
scalar context, and (of course) nothing at all in a void context.
-(Note that in the absence of a explicit C<return>, a subroutine, eval,
+(Note that in the absence of an explicit C<return>, a subroutine, eval,
or do FILE will automatically return the value of the last expression
evaluated.)
Any of the bit masks can also be undef. The timeout, if specified, is
in seconds, which may be fractional. Note: not all implementations are
-capable of returning the$timeleft. If not, they always return
+capable of returning the $timeleft. If not, they always return
$timeleft equal to the supplied $timeout.
You can effect a sleep of 250 milliseconds this way:
=item semop KEY,OPSTRING
Calls the System V IPC function semop to perform semaphore operations
-such as signaling and waiting. OPSTRING must be a packed array of
+such as signalling and waiting. OPSTRING must be a packed array of
semop structures. Each semop structure can be generated with
-C<pack("sss", $semnum, $semop, $semflag)>. The number of semaphore
+C<pack("s!3", $semnum, $semop, $semflag)>. The number of semaphore
operations is implied by the length of OPSTRING. Returns true if
successful, or false if there is an error. As an example, the
following code waits on semaphore $semnum of semaphore id $semid:
- $semop = pack("sss", $semnum, -1, 0);
+ $semop = pack("s!3", $semnum, -1, 0);
die "Semaphore trouble: $!\n" unless semop($semid, $semop);
To signal the semaphore, replace C<-1> with C<1>. See also
When C<use locale> is in effect, C<sort LIST> sorts LIST according to the
current collation locale. See L<perllocale>.
+Perl does B<not> guarantee that sort is stable. (A I<stable> sort
+preserves the input order of elements that compare equal.) 5.7 and
+5.8 happen to use a stable mergesort, but 5.6 and earlier used quicksort,
+which is not stable. Do not assume that future perls will continue to
+use a stable sort.
+
Examples:
# sort lexically
produces the output 'h:i:t:h:e:r:e'.
+Using the empty pattern C<//> specifically matches the null string, and is
+not be confused with the use of C<//> to mean "the last successful pattern
+match".
+
Empty leading (or trailing) fields are produced when there positive width
matches at the beginning (or end) of the string; a zero-width match at the
beginning (or end) of the string does not produce an empty field. For
#...
}
+As with regular pattern matching, any capturing parentheses that are not
+matched in a C<split()> will be set to C<undef> when returned:
+
+ @fields = split /(A)|B/, "1A2B3";
+ # @fields is (1, 'A', 2, undef, 3)
=item sprintf FORMAT, LIST
=item srand
-Sets the random number seed for the C<rand> operator. If EXPR is
-omitted, uses a semi-random value supplied by the kernel (if it supports
-the F</dev/urandom> device) or based on the current time and process
-ID, among other things. In versions of Perl prior to 5.004 the default
-seed was just the current C<time>. This isn't a particularly good seed,
-so many old programs supply their own seed value (often C<time ^ $$> or
-C<time ^ ($$ + ($$ << 15))>), but that isn't necessary any more.
+Sets the random number seed for the C<rand> operator.
+
+The point of the function is to "seed" the C<rand> function so that
+C<rand> can produce a different sequence each time you run your
+program.
+
+If srand() is not called explicitly, it is called implicitly at the
+first use of the C<rand> operator. However, this was not the case in
+versions of Perl before 5.004, so if your script will run under older
+Perl versions, it should call C<srand>.
-In fact, it's usually not necessary to call C<srand> at all, because if
-it is not called explicitly, it is called implicitly at the first use of
-the C<rand> operator. However, this was not the case in version of Perl
-before 5.004, so if your script will run under older Perl versions, it
-should call C<srand>.
+Most programs won't even call srand() at all, except those that
+need a cryptographically-strong starting point rather than the
+generally acceptable default, which is based on time of day,
+process ID, and memory allocation, or the F</dev/urandom> device,
+if available.
+
+You can call srand($seed) with the same $seed to reproduce the
+I<same> sequence from rand(), but this is usually reserved for
+generating predictable results for testing or debugging.
+Otherwise, don't call srand() more than once in your program.
+
+Do B<not> call srand() (i.e. without an argument) more than once in
+a script. The internal state of the random number generator should
+contain more entropy than can be provided by any seed, so calling
+srand() again actually I<loses> randomness.
+
+Most implementations of C<srand> take an integer and will silently
+truncate decimal numbers. This means C<srand(42)> will usually
+produce the same results as C<srand(42.1)>. To be safe, always pass
+C<srand> an integer.
+
+In versions of Perl prior to 5.004 the default seed was just the
+current C<time>. This isn't a particularly good seed, so many old
+programs supply their own seed value (often C<time ^ $$> or C<time ^
+($$ + ($$ << 15))>), but that isn't necessary any more.
Note that you need something much more random than the default seed for
cryptographic purposes. Checksumming the compressed output of one or more
If you're particularly concerned with this, see the C<Math::TrulyRandom>
module in CPAN.
-Do I<not> call C<srand> multiple times in your program unless you know
-exactly what you're doing and why you're doing it. The point of the
-function is to "seed" the C<rand> function so that C<rand> can produce
-a different sequence each time you run your program. Just do it once at the
-top of your program, or you I<won't> get random numbers out of C<rand>!
-
Frequently called programs (like CGI scripts) that simply use
time ^ $$
($user,$system,$cuser,$csystem) = times;
+In scalar context, C<times> returns C<$user>.
+
=item tr///
The transliteration operator. Same as C<y///>. See L<perlop>.
=item uc
Returns an uppercased version of EXPR. This is the internal function
-implementing the C<\U> escape in double-quoted strings.
-Respects current LC_CTYPE locale if C<use locale> in force. See L<perllocale>.
-Under Unicode (C<use utf8>) it uses the standard Unicode uppercase mappings. (It
-does not attempt to do titlecase mapping on initial letters. See C<ucfirst> for that.)
+implementing the C<\U> escape in double-quoted strings. Respects
+current LC_CTYPE locale if C<use locale> in force. See L<perllocale>
+and L<perlunicode> for more details about locale and Unicode support.
+It does not attempt to do titlecase mapping on initial letters. See
+C<ucfirst> for that.
If EXPR is omitted, uses C<$_>.
=item ucfirst
-Returns the value of EXPR with the first character
-in uppercase (titlecase in Unicode). This is
-the internal function implementing the C<\u> escape in double-quoted strings.
-Respects current LC_CTYPE locale if C<use locale> in force. See L<perllocale>
-and L<utf8>.
+Returns the value of EXPR with the first character in uppercase
+(titlecase in Unicode). This is the internal function implementing
+the C<\u> escape in double-quoted strings. Respects current LC_CTYPE
+locale if C<use locale> in force. See L<perllocale> and L<perlunicode>
+for more details about locale and Unicode support.
If EXPR is omitted, uses C<$_>.
depending on how you look at it. Prepends list to the front of the
array, and returns the new number of elements in the array.
- unshift(ARGV, '-e') unless $ARGV[0] =~ /^-/;
+ unshift(@ARGV, '-e') unless $ARGV[0] =~ /^-/;
Note the LIST is prepended whole, not one element at a time, so the
prepended elements stay in the same order. Use C<reverse> to do the
except that Module I<must> be a bareword.
-VERSION, which can be specified as a literal of the form v5.6.1, demands
-that the current version of Perl (C<$^V> or $PERL_VERSION) be at least
-as recent as that version. (For compatibility with older versions of Perl,
-a numeric literal will also be interpreted as VERSION.) If the version
-of the running Perl interpreter is less than VERSION, then an error
-message is printed and Perl exits immediately without attempting to
-parse the rest of the file. Compare with L</require>, which can do a
-similar check at run time.
+VERSION may be either a numeric argument such as 5.006, which will be
+compared to C<$]>, or a literal of the form v5.6.1, which will be compared
+to C<$^V> (aka $PERL_VERSION. A fatal error is produced if VERSION is
+greater than the version of the current Perl interpreter; Perl will not
+attempt to parse the rest of the file. Compare with L</require>, which can
+do a similar check at run time.
+
+Specifying VERSION as a literal of the form v5.6.1 should generally be
+avoided, because it leads to misleading error messages under earlier
+versions of Perl which do not support this syntax. The equivalent numeric
+version should be used instead.
use v5.6.1; # compile time version check
use 5.6.1; # ditto
- use 5.005_03; # float version allowed for compatibility
+ use 5.006_001; # ditto; preferred for backwards compatibility
This is often useful if you need to check the current Perl version before
C<use>ing library modules that have changed in incompatible ways from
$now = time;
utime $now, $now, @ARGV;
+If the first two elements of the list are C<undef>, then the utime(2)
+function in the C library will be called with a null second argument.
+On most systems, this will set the file's access and modification
+times to the current time. (i.e. equivalent to the example above.)
+
+ utime undef, undef, @ARGV;
+
=item values HASH
Returns a list consisting of all the values of the named hash. (In a
use POSIX ":sys_wait_h";
#...
do {
- $kid = waitpid(-1,&WNOHANG);
+ $kid = waitpid(-1, WNOHANG);
} until $kid == -1;
then you can do a non-blocking wait for all pending zombie processes.
projects / p5sagit/p5-mst-13.2.git / blobdiff