=head1 NAME
-perlfaq7 - Perl Language Issues ($Revision: 1.24 $, $Date: 1999/01/08 05:32:11 $)
+perlfaq7 - Perl Language Issues ($Revision: 1.1 $, $Date: 2001/09/20 03:03:00 $)
=head1 DESCRIPTION
The work of parsing perl is distributed between yacc, the lexer, smoke
and mirrors."
-=head2 What are all these $@%* punctuation signs, and how do I know when to use them?
+=head2 What are all these $@%&* punctuation signs, and how do I know when to use them?
They are type specifiers, as detailed in L<perldata>:
$ for scalar values (number, string or reference)
@ for arrays
% for hashes (associative arrays)
+ & for subroutines (aka functions, procedures, methods)
* for all types of that symbol name. In version 4 you used them like
pointers, but in modern perls you can just use references.
-While there are a few places where you don't actually need these type
-specifiers, you should always use them.
-
-A couple of others that you're likely to encounter that aren't
-really type specifiers are:
+There are couple of other symbols that you're likely to encounter that aren't
+really type specifiers:
<> are used for inputting a record from a filehandle.
\ takes a reference to something.
-Note that E<lt>FILEE<gt> is I<neither> the type specifier for files
-nor the name of the handle. It is the C<E<lt>E<gt>> operator applied
-to the handle FILE. It reads one line (well, record - see
+Note that <FILE> is I<neither> the type specifier for files
+nor the name of the handle. It is the C<< <> >> operator applied
+to the handle FILE. It reads one line (well, record--see
L<perlvar/$/>) from the handle FILE in scalar context, or I<all> lines
in list context. When performing open, close, or any other operation
-besides C<E<lt>E<gt>> on files, or even talking about the handle, do
+besides C<< <> >> on files, or even when talking about the handle, do
I<not> use the brackets. These are correct: C<eof(FH)>, C<seek(FH, 0,
2)> and "copying from STDIN to FILE".
Normally, a bareword doesn't need to be quoted, but in most cases
probably should be (and must be under C<use strict>). But a hash key
consisting of a simple word (that isn't the name of a defined
-subroutine) and the left-hand operand to the C<=E<gt>> operator both
+subroutine) and the left-hand operand to the C<< => >> operator both
count as though they were quoted:
This is like this
=head2 How do I temporarily block warnings?
-The C<$^W> variable (documented in L<perlvar>) controls
-runtime warnings for a block:
+If you are running Perl 5.6.0 or better, the C<use warnings> pragma
+allows fine control of what warning are produced.
+See L<perllexwarn> for more details.
+
+ {
+ no warnings; # temporarily turn off warnings
+ $a = $b + $c; # I know these might be undef
+ }
+
+If you have an older version of Perl, the C<$^W> variable (documented
+in L<perlvar>) controls runtime warnings for a block:
{
local $^W = 0; # temporarily turn off warnings
Note that like all the punctuation variables, you cannot currently
use my() on C<$^W>, only local().
-A new C<use warnings> pragma is in the works to provide finer control
-over all this. The curious should check the perl5-porters mailing list
-archives for details.
-
=head2 What's an extension?
-A way of calling compiled C code from Perl. Reading L<perlxstut>
-is a good place to learn more about extensions.
+An extension is a way of calling compiled C code from Perl. Reading
+L<perlxstut> is a good place to learn more about extensions.
=head2 Why do Perl operators have different precedence than C operators?
Actually, they don't. All C operators that Perl copies have the same
precedence in Perl as they do in C. The problem is with operators that C
doesn't have, especially functions that give a list context to everything
-on their right, eg print, chmod, exec, and so on. Such functions are
+on their right, eg. print, chmod, exec, and so on. Such functions are
called "list operators" and appear as such in the precedence table in
L<perlop>.
package Some::Module; # assumes Some/Module.pm
use strict;
+ use warnings;
BEGIN {
use Exporter ();
- use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS);
+ our ($VERSION, @ISA, @EXPORT, @EXPORT_OK, %EXPORT_TAGS);
## set the version for version checking; uncomment to use
## $VERSION = 1.00;
# if using RCS/CVS, this next line may be preferred,
# but beware two-digit versions.
- $VERSION = do{my@r=q$Revision: 1.24 $=~/\d+/g;sprintf '%d.'.'%02d'x$#r,@r};
+ $VERSION = do{my@r=q$Revision: 1.1 $=~/\d+/g;sprintf '%d.'.'%02d'x$#r,@r};
@ISA = qw(Exporter);
@EXPORT = qw(&func1 &func2 &func3);
# as well as any optionally exported functions
@EXPORT_OK = qw($Var1 %Hashit);
}
- use vars @EXPORT_OK;
+ our @EXPORT_OK;
+
+ # exported package globals go here
+ our $Var1;
+ our %Hashit;
# non-exported package globals go here
- use vars qw( @more $stuff );
+ our @more;
+ our $stuff;
# initialize package globals, first exported ones
$Var1 = '';
}
This is not C<-w> clean, however. There is no C<-w> clean way to
-detect taintedness - take this as a hint that you should untaint
+detect taintedness--take this as a hint that you should untaint
all possibly-tainted data.
=head2 What's a closure?
Closures make sense in any programming language where you can have the
return value of a function be itself a function, as you can in Perl.
Note that some languages provide anonymous functions but are not
-capable of providing proper closures; the Python language, for
+capable of providing proper closures: the Python language, for
example. For more information on closures, check out any textbook on
functional programming. Scheme is a language that not only supports
but encourages closures.
my $line;
timeout( 30, sub { $line = <STDIN> } );
-If the code to execute had been passed in as a string, C<'$line =
-E<lt>STDINE<gt>'>, there would have been no way for the hypothetical
-timeout() function to access the lexical variable $line back in its
-caller's scope.
+If the code to execute had been passed in as a string,
+C<< '$line = <STDIN>' >>, there would have been no way for the
+hypothetical timeout() function to access the lexical variable
+$line back in its caller's scope.
=head2 What is variable suicide and how can I prevent it?
print "Finally $f\n";
The $f that has "bar" added to it three times should be a new C<$f>
-(C<my $f> should create a new local variable each time through the
-loop). It isn't, however. This is a bug, and will be fixed.
+(C<my $f> should create a new local variable each time through the loop).
+It isn't, however. This was a bug, now fixed in the latest releases
+(tested against 5.004_05, 5.005_03, and 5.005_56).
-=head2 How can I pass/return a {Function, FileHandle, Array, Hash, Method, Regexp}?
+=head2 How can I pass/return a {Function, FileHandle, Array, Hash, Method, Regex}?
-With the exception of regexps, you need to pass references to these
+With the exception of regexes, you need to pass references to these
objects. See L<perlsub/"Pass by Reference"> for this particular
question, and L<perlref> for information on references.
+See ``Passing Regexes'', below, for information on passing regular
+expressions.
+
=over 4
=item Passing Variables and Functions
-Regular variables and functions are quite easy: just pass in a
+Regular variables and functions are quite easy to pass: just pass in a
reference to an existing or anonymous variable or function:
func( \$some_scalar );
=item Passing Filehandles
To pass filehandles to subroutines, use the C<*FH> or C<\*FH> notations.
-These are "typeglobs" - see L<perldata/"Typeglobs and Filehandles">
+These are "typeglobs"--see L<perldata/"Typeglobs and Filehandles">
and especially L<perlsub/"Pass by Reference"> for more information.
Here's an excerpt:
If you're planning on generating new filehandles, you could do this:
sub openit {
- my $name = shift;
+ my $path = shift;
local *FH;
return open (FH, $path) ? *FH : undef;
}
$fh = openit('< /etc/motd');
print <$fh>;
-=item Passing Regexps
+=item Passing Regexes
+
+To pass regexes around, you'll need to be using a release of Perl
+sufficiently recent as to support the C<qr//> construct, pass around
+strings and use an exception-trapping eval, or else be very, very clever.
+
+Here's an example of how to pass in a string to be regex compared
+using C<qr//>:
-To pass regexps around, you'll need to either use one of the highly
-experimental regular expression modules from CPAN (Nick Ing-Simmons's
-Regexp or Ilya Zakharevich's Devel::Regexp), pass around strings
-and use an exception-trapping eval, or else be very, very clever.
-Here's an example of how to pass in a string to be regexp compared:
+ sub compare($$) {
+ my ($val1, $regex) = @_;
+ my $retval = $val1 =~ /$regex/;
+ return $retval;
+ }
+ $match = compare("old McDonald", qr/d.*D/i);
+
+Notice how C<qr//> allows flags at the end. That pattern was compiled
+at compile time, although it was executed later. The nifty C<qr//>
+notation wasn't introduced until the 5.005 release. Before that, you
+had to approach this problem much less intuitively. For example, here
+it is again if you don't have C<qr//>:
sub compare($$) {
- my ($val1, $regexp) = @_;
- my $retval = eval { $val =~ /$regexp/ };
+ my ($val1, $regex) = @_;
+ my $retval = eval { $val1 =~ /$regex/ };
die if $@;
return $retval;
}
- $match = compare("old McDonald", q/d.*D/);
+ $match = compare("old McDonald", q/($?i)d.*D/);
Make sure you never say something like this:
- return eval "\$val =~ /$regexp/"; # WRONG
+ return eval "\$val =~ /$regex/"; # WRONG
-or someone can sneak shell escapes into the regexp due to the double
+or someone can sneak shell escapes into the regex due to the double
interpolation of the eval and the double-quoted string. For example:
$pattern_of_evil = 'danger ${ system("rm -rf * &") } danger';
}
}
-Or you can use a closure to bundle up the object and its method call
-and arguments:
+Or, you can use a closure to bundle up the object, its
+method call, and arguments:
my $whatnot = sub { $some_obj->obfuscate(@args) };
func($whatnot);
that was initialized at compile time.
To declare a file-private variable, you'll still use a my(), putting
-it at the outer scope level at the top of the file. Assume this is in
-file Pax.pm:
+the declaration at the outer scope level at the top of the file.
+Assume this is in file Pax.pm:
package Pax;
my $started = scalar(localtime(time()));
=head2 What's the difference between dynamic and lexical (static) scoping? Between local() and my()?
-C<local($x)> saves away the old value of the global variable C<$x>,
-and assigns a new value for the duration of the subroutine, I<which is
+C<local($x)> saves away the old value of the global variable C<$x>
+and assigns a new value for the duration of the subroutine I<which is
visible in other functions called from that subroutine>. This is done
at run-time, so is called dynamic scoping. local() always affects global
variables, also called package variables or dynamic variables.
C<my($x)> creates a new variable that is only visible in the current
-subroutine. This is done at compile-time, so is called lexical or
+subroutine. This is done at compile-time, so it is called lexical or
static scoping. my() always affects private variables, also called
lexical variables or (improperly) static(ly scoped) variables.
variables. It gives a global variable a temporary value. my() is
what you're looking for if you want private variables.
-See L<perlsub/"Private Variables via my()"> and L<perlsub/"Temporary
-Values via local()"> for excruciating details.
+See L<perlsub/"Private Variables via my()"> and
+L<perlsub/"Temporary Values via local()"> for excruciating details.
=head2 How can I access a dynamic variable while a similarly named lexical is in scope?
are effectively shallowly bound. Consider this just one more reason
not to use them. See the answer to L<"What's a closure?">.
-=head2 Why doesn't "my($foo) = E<lt>FILEE<gt>;" work right?
+=head2 Why doesn't "my($foo) = <FILE>;" work right?
C<my()> and C<local()> give list context to the right hand side
-of C<=>. The E<lt>FHE<gt> read operation, like so many of Perl's
+of C<=>. The <FH> read operation, like so many of Perl's
functions and operators, can tell which context it was called in and
behaves appropriately. In general, the scalar() function can help.
This function does nothing to the data itself (contrary to popular myth)
If you want to override a predefined function, such as open(),
then you'll have to import the new definition from a different
-module. See L<perlsub/"Overriding Builtin Functions">. There's
+module. See L<perlsub/"Overriding Built-in Functions">. There's
also an example in L<perltoot/"Class::Template">.
If you want to overload a Perl operator, such as C<+> or C<**>,
=head2 What's the difference between calling a function as &foo and foo()?
When you call a function as C<&foo>, you allow that function access to
-your current @_ values, and you by-pass prototypes. That means that
-the function doesn't get an empty @_, it gets yours! While not
+your current @_ values, and you bypass prototypes.
+The function doesn't get an empty @_--it gets yours! While not
strictly speaking a bug (it's documented that way in L<perlsub>), it
would be hard to consider this a feature in most cases.
This is explained in more depth in the L<perlsyn>. Briefly, there's
no official case statement, because of the variety of tests possible
in Perl (numeric comparison, string comparison, glob comparison,
-regexp matching, overloaded comparisons, ...). Larry couldn't decide
-how best to do this, so he left it out, even though it's been on the
-wish list since perl1.
+regex matching, overloaded comparisons, ...).
+Larry couldn't decide how best to do this, so he left it out, even
+though it's been on the wish list since perl1.
+
+Starting from Perl 5.8 to get switch and case one can use the
+Switch extension and say:
+
+ use Switch;
-The general answer is to write a construct like this:
+after which one has switch and case. It is not as fast as it could be
+because it's not really part of the language (it's done using source
+filters) but it is available, and it's very flexible.
+
+But if one wants to use pure Perl, the general answer is to write a
+construct like this:
for ($variable_to_test) {
if (/pat1/) { } # do something
For example, let's say you wanted to test which of many answers you were
given, but in a case-insensitive way that also allows abbreviations.
You can use the following technique if the strings all start with
-different characters, or if you want to arrange the matches so that
+different characters or if you want to arrange the matches so that
one takes precedence over another, as C<"SEND"> has precedence over
C<"STOP"> here:
Some possible reasons: your inheritance is getting confused, you've
misspelled the method name, or the object is of the wrong type. Check
-out L<perltoot> for details on these. You may also use C<print
-ref($object)> to find out the class C<$object> was blessed into.
+out L<perltoot> for details about any of the above cases. You may
+also use C<print ref($object)> to find out the class C<$object> was
+blessed into.
Another possible reason for problems is because you've used the
indirect object syntax (eg, C<find Guru "Samy">) on a class name
before Perl has seen that such a package exists. It's wisest to make
sure your packages are all defined before you start using them, which
will be taken care of if you use the C<use> statement instead of
-C<require>. If not, make sure to use arrow notation (eg,
-C<Guru-E<gt>find("Samy")>) instead. Object notation is explained in
+C<require>. If not, make sure to use arrow notation (eg.,
+C<< Guru->find("Samy") >>) instead. Object notation is explained in
L<perlobj>.
Make sure to read about creating modules in L<perlmod> and
-the perils of indirect objects in L<perlobj/"WARNING">.
+the perils of indirect objects in L<perlobj/"Method Invocation">.
=head2 How can I find out my current package?
my $packname = __PACKAGE__;
-But if you're a method and you want to print an error message
+But, if you're a method and you want to print an error message
that includes the kind of object you were called on (which is
not necessarily the same as the one in which you were compiled):
Or, if you're using a recent release of Perl, you can
just use the Symbol::delete_package() function instead.
+=head2 How can I use a variable as a variable name?
+
+Beginners often think they want to have a variable contain the name
+of a variable.
+
+ $fred = 23;
+ $varname = "fred";
+ ++$$varname; # $fred now 24
+
+This works I<sometimes>, but it is a very bad idea for two reasons.
+
+The first reason is that this technique I<only works on global
+variables>. That means that if $fred is a lexical variable created
+with my() in the above example, the code wouldn't work at all: you'd
+accidentally access the global and skip right over the private lexical
+altogether. Global variables are bad because they can easily collide
+accidentally and in general make for non-scalable and confusing code.
+
+Symbolic references are forbidden under the C<use strict> pragma.
+They are not true references and consequently are not reference counted
+or garbage collected.
+
+The other reason why using a variable to hold the name of another
+variable is a bad idea is that the question often stems from a lack of
+understanding of Perl data structures, particularly hashes. By using
+symbolic references, you are just using the package's symbol-table hash
+(like C<%main::>) instead of a user-defined hash. The solution is to
+use your own hash or a real reference instead.
+
+ $fred = 23;
+ $varname = "fred";
+ $USER_VARS{$varname}++; # not $$varname++
+
+There we're using the %USER_VARS hash instead of symbolic references.
+Sometimes this comes up in reading strings from the user with variable
+references and wanting to expand them to the values of your perl
+program's variables. This is also a bad idea because it conflates the
+program-addressable namespace and the user-addressable one. Instead of
+reading a string and expanding it to the actual contents of your program's
+own variables:
+
+ $str = 'this has a $fred and $barney in it';
+ $str =~ s/(\$\w+)/$1/eeg; # need double eval
+
+it would be better to keep a hash around like %USER_VARS and have
+variable references actually refer to entries in that hash:
+
+ $str =~ s/\$(\w+)/$USER_VARS{$1}/g; # no /e here at all
+
+That's faster, cleaner, and safer than the previous approach. Of course,
+you don't need to use a dollar sign. You could use your own scheme to
+make it less confusing, like bracketed percent symbols, etc.
+
+ $str = 'this has a %fred% and %barney% in it';
+ $str =~ s/%(\w+)%/$USER_VARS{$1}/g; # no /e here at all
+
+Another reason that folks sometimes think they want a variable to
+contain the name of a variable is because they don't know how to build
+proper data structures using hashes. For example, let's say they
+wanted two hashes in their program: %fred and %barney, and that they
+wanted to use another scalar variable to refer to those by name.
+
+ $name = "fred";
+ $$name{WIFE} = "wilma"; # set %fred
+
+ $name = "barney";
+ $$name{WIFE} = "betty"; # set %barney
+
+This is still a symbolic reference, and is still saddled with the
+problems enumerated above. It would be far better to write:
+
+ $folks{"fred"}{WIFE} = "wilma";
+ $folks{"barney"}{WIFE} = "betty";
+
+And just use a multilevel hash to start with.
+
+The only times that you absolutely I<must> use symbolic references are
+when you really must refer to the symbol table. This may be because it's
+something that can't take a real reference to, such as a format name.
+Doing so may also be important for method calls, since these always go
+through the symbol table for resolution.
+
+In those cases, you would turn off C<strict 'refs'> temporarily so you
+can play around with the symbol table. For example:
+
+ @colors = qw(red blue green yellow orange purple violet);
+ for my $name (@colors) {
+ no strict 'refs'; # renege for the block
+ *$name = sub { "<FONT COLOR='$name'>@_</FONT>" };
+ }
+
+All those functions (red(), blue(), green(), etc.) appear to be separate,
+but the real code in the closure actually was compiled only once.
+
+So, sometimes you might want to use symbolic references to directly
+manipulate the symbol table. This doesn't matter for formats, handles, and
+subroutines, because they are always global--you can't use my() on them.
+For scalars, arrays, and hashes, though--and usually for subroutines--
+you probably only want to use hard references.
+
=head1 AUTHOR AND COPYRIGHT
Copyright (c) 1997-1999 Tom Christiansen and Nathan Torkington.
All rights reserved.
-When included as part of the Standard Version of Perl, or as part of
-its complete documentation whether printed or otherwise, this work
-may be distributed only under the terms of Perl's Artistic Licence.
-Any distribution of this file or derivatives thereof I<outside>
-of that package require that special arrangements be made with
-copyright holder.
+This documentation is free; you can redistribute it and/or modify it
+under the same terms as Perl itself.
Irrespective of its distribution, all code examples in this file
are hereby placed into the public domain. You are permitted and