=head1 NAME
-perlfaq5 - Files and Formats ($Revision: 1.22 $, $Date: 1997/04/24 22:44:02 $)
+perlfaq5 - Files and Formats ($Revision: 1.38 $, $Date: 1999/05/23 16:08:30 $)
=head1 DESCRIPTION
Note the bizarrely hardcoded carriage return and newline in their octal
equivalents. This is the ONLY way (currently) to assure a proper flush
-on all platforms, including Macintosh. That the way things work in
+on all platforms, including Macintosh. That's the way things work in
network programming: you really should specify the exact bit pattern
on the network line terminator. In practice, C<"\n\n"> often works,
but this is not portable.
=head2 How do I change one line in a file/delete a line in a file/insert a line in the middle of a file/append to the beginning of a file?
+Those are operations of a text editor. Perl is not a text editor.
+Perl is a programming language. You have to decompose the problem into
+low-level calls to read, write, open, close, and seek.
+
Although humans have an easy time thinking of a text file as being a
-sequence of lines that operates much like a stack of playing cards --
-or punch cards -- computers usually see the text file as a sequence of
-bytes. In general, there's no direct way for Perl to seek to a
-particular line of a file, insert text into a file, or remove text
-from a file.
+sequence of lines that operates much like a stack of playing cards -- or
+punch cards -- computers usually see the text file as a sequence of bytes.
+In general, there's no direct way for Perl to seek to a particular line
+of a file, insert text into a file, or remove text from a file.
(There are exceptions in special circumstances. You can add or remove at
the very end of the file. Another is replacing a sequence of bytes with
$old = $file;
$new = "$file.tmp.$$";
- $bak = "$file.bak";
+ $bak = "$file.orig";
open(OLD, "< $old") or die "can't open $old: $!";
open(NEW, "> $new") or die "can't open $new: $!";
perl -pi -e 's/(^\s+test\s+)\d+/ $1 . ++$count /e' t/op/taint.t
# form a script
- local($^I, @ARGV) = ('.bak', glob("*.c"));
+ local($^I, @ARGV) = ('.orig', glob("*.c"));
while (<>) {
if ($. == 1) {
print "This line should appear at the top of each file\n";
filehandle opened for reading and writing. Use this if you don't
need to know the file's name.
- use IO::File;
+ use IO::File;
$fh = IO::File->new_tmpfile()
- or die "Unable to make new temporary file: $!";
+ or die "Unable to make new temporary file: $!";
Or you can use the C<tmpnam> function from the POSIX module to get a
filename that you then open yourself. Use this if you do need to know
=head2 How can I manipulate fixed-record-length files?
The most efficient way is using pack() and unpack(). This is faster than
-using substr() when take many, many strings. It is slower for just a few.
+using substr() when taking many, many strings. It is slower for just a few.
Here is a sample chunk of code to break up and put back together again
some fixed-format input lines, in this case from the output of a normal,
print "$name $. $line";
}
-If you want to create many, anonymous handles, you should check out the
+For passing filehandles to functions, the easiest way is to
+preface them with a star, as in func(*STDIN). See L<perlfaq7/"Passing
+Filehandles"> for details.
+
+If you want to create many anonymous handles, you should check out the
Symbol, FileHandle, or IO::Handle (etc.) modules. Here's the equivalent
code with Symbol::gensym, which is reasonably light-weight:
$file{$filename} = [ $i++, $fh ];
}
-Or here using the semi-object-oriented FileHandle, which certainly isn't
-light-weight:
+Or here using the semi-object-oriented FileHandle module, which certainly
+isn't light-weight:
use FileHandle;
Then use any of those as you would a normal filehandle. Anywhere that
Perl is expecting a filehandle, an indirect filehandle may be used
instead. An indirect filehandle is just a scalar variable that contains
-a filehandle. Functions like C<print>, C<open>, C<seek>, or the functions or
-the C<E<lt>FHE<gt>> diamond operator will accept either a read filehandle
+a filehandle. Functions like C<print>, C<open>, C<seek>, or
+the C<< <FH> >> diamond operator will accept either a read filehandle
or a scalar variable containing one:
($ifh, $ofh, $efh) = (*STDIN, *STDOUT, *STDERR);
$got = <$ifh>
print $efh "What was that: $got";
-Of you're passing a filehandle to a function, you can write
+If you're passing a filehandle to a function, you can write
the function in two ways:
sub accept_fh {
real operator, not just a function with a comma-less argument. Assuming
you've been storing typeglobs in your structure as we did above, you
can use the built-in function named C<readline> to reads a record just
-as C<E<lt>E<gt>> does. Given the initialization shown above for @fd, this
+as C<< <> >> does. Given the initialization shown above for @fd, this
would work, but only because readline() require a typeglob. It doesn't
work with objects or strings, which might be a bug we haven't fixed yet.
=head2 How can I write() into a string?
-See L<perlform> for an swrite() function.
+See L<perlform/"Accessing Formatting Internals"> for an swrite() function.
=head2 How can I output my numbers with commas added?
sub commify {
local $_ = shift;
- 1 while s/^(-?\d+)(\d{3})/$1,$2/;
+ 1 while s/^([-+]?\d+)(\d{3})/$1,$2/;
return $_;
}
You can't just:
- s/^(-?\d+)(\d{3})/$1,$2/g;
+ s/^([-+]?\d+)(\d{3})/$1,$2/g;
because you have to put the comma in and then recalculate your
position.
my $input = shift;
$input = reverse $input;
$input =~ s<(\d\d\d)(?=\d)(?!\d*\.)><$1,>g;
- return reverse $input;
+ return scalar reverse $input;
}
=head2 How can I translate tildes (~) in a filename?
-Use the E<lt>E<gt> (glob()) operator, documented in L<perlfunc>. This
+Use the <> (glob()) operator, documented in L<perlfunc>. This
requires that you have a shell installed that groks tildes, meaning
csh or tcsh or (some versions of) ksh, and thus may have portability
problems. The Glob::KGlob module (available from CPAN) gives more
open(FH, "+> /path/name"); # WRONG (almost always)
Whoops. You should instead use this, which will fail if the file
-doesn't exist. Using "E<gt>" always clobbers or creates.
-Using "E<lt>" never does either. The "+" doesn't change this.
+doesn't exist.
+
+ open(FH, "+< /path/name"); # open for update
+
+Using ">" always clobbers or creates. Using "<" never does
+either. The "+" doesn't change this.
Here are examples of many kinds of file opens. Those using sysopen()
all assume
successful create or unlink the same file! Therefore O_EXCL
isn't so exclusive as you might wish.
+See also the new L<perlopentut> if you have it (new for 5.6).
+
=head2 Why do I sometimes get an "Argument list too long" when I use <*>?
-The C<E<lt>E<gt>> operator performs a globbing operation (see above).
-By default glob() forks csh(1) to do the actual glob expansion, but
+The C<< <> >> operator performs a globbing operation (see above).
+In Perl versions earlier than v5.6.0, the internal glob() operator forks
+csh(1) to do the actual glob expansion, but
csh can't handle more than 127 items and so gives the error message
C<Argument list too long>. People who installed tcsh as csh won't
have this problem, but their users may be surprised by it.
-To get around this, either do the glob yourself with C<Dirhandle>s and
-patterns, or use a module like Glob::KGlob, one that doesn't use the
-shell to do globbing.
+To get around this, either upgrade to Perl v5.6.0 or later, do the glob
+yourself with readdir() and patterns, or use a module like Glob::KGlob,
+one that doesn't use the shell to do globbing.
=head2 Is there a leak/bug in glob()?
context, you may cause a leak and/or unpredictable behavior. It's
best therefore to use glob() only in list context.
-=head2 How can I open a file with a leading "E<gt>" or trailing blanks?
+=head2 How can I open a file with a leading ">" or trailing blanks?
Normally perl ignores trailing blanks in filenames, and interprets
certain leading characters (or a trailing "|") to mean something
sub safe_filename {
local $_ = shift;
- return m#^/#
- ? "$_\0"
- : "./$_\0";
+ s#^([^./])#./$1#;
+ $_ .= "\0";
+ return $_;
}
- $fn = safe_filename("<<<something really wicked ");
- open(FH, "> $fn") or "couldn't open $fn: $!";
+ $badpath = "<<<something really wicked ";
+ $fn = safe_filename($badpath");
+ open(FH, "> $fn") or "couldn't open $badpath: $!";
-You could also use the sysopen() function (see L<perlfunc/sysopen>).
+This assumes that you are using POSIX (portable operating systems
+interface) paths. If you are on a closed, non-portable, proprietary
+system, you may have to adjust the C<"./"> above.
+
+It would be a lot clearer to use sysopen(), though:
+
+ use Fcntl;
+ $badpath = "<<<something really wicked ";
+ open (FH, $badpath, O_WRONLY | O_CREAT | O_TRUNC)
+ or die "can't open $badpath: $!";
+
+For more information, see also the new L<perlopentut> if you have it
+(new for 5.6).
=head2 How can I reliably rename a file?
-Well, usually you just use Perl's rename() function. But that may
-not work everywhere, in particular, renaming files across file systems.
-If your operating system supports a mv(1) program or its moral equivalent,
-this works:
+Well, usually you just use Perl's rename() function. But that may not
+work everywhere, in particular, renaming files across file systems.
+Some sub-Unix systems have broken ports that corrupt the semantics of
+rename() -- for example, WinNT does this right, but Win95 and Win98
+are broken. (The last two parts are not surprising, but the first is. :-)
+
+If your operating system supports a proper mv(1) program or its moral
+equivalent, this works:
rename($old, $new) or system("mv", $old, $new);
real rename(), though, which preserves metainformation like
permissions, timestamps, inode info, etc.
-The newer version of File::Copy export a move() function.
+The newer version of File::Copy exports a move() function.
=head2 How can I lock a file?
=item 3
-Some versions of flock() can't lock files over a network (e.g. on NFS
-file systems), so you'd need to force the use of fcntl(2) when you
-build Perl. See the flock entry of L<perlfunc>, and the F<INSTALL>
-file in the source distribution for information on building Perl to do
-this.
+Some versions of flock() can't lock files over a network (e.g. on NFS file
+systems), so you'd need to force the use of fcntl(2) when you build Perl.
+But even this is dubious at best. See the flock entry of L<perlfunc>,
+and the F<INSTALL> file in the source distribution for information on
+building Perl to do this.
+
+Two potentially non-obvious but traditional flock semantics are that
+it waits indefinitely until the lock is granted, and that its locks
+I<merely advisory>. Such discretionary locks are more flexible, but
+offer fewer guarantees. This means that files locked with flock() may
+be modified by programs that do not also use flock(). Cars that stop
+for red lights get on well with each other, but not with cars that don't
+stop for red lights. See the perlport manpage, your port's specific
+documentation, or your system-specific local manpages for details. It's
+best to assume traditional behavior if you're writing portable programs.
+(But if you're not, you should as always feel perfectly free to write
+for your own system's idiosyncrasies (sometimes called "features").
+Slavish adherence to portability concerns shouldn't get in the way of
+your getting your job done.)
+
+For more information on file locking, see also L<perlopentut/"File
+Locking"> if you have it (new for 5.6).
=back
-=head2 What can't I just open(FH, ">file.lock")?
+=head2 Why can't I just open(FH, ">file.lock")?
A common bit of code B<NOT TO USE> is this:
except that lamentably, file creation (and deletion) is not atomic
over NFS, so this won't work (at least, not every time) over the net.
-Various schemes involving involving link() have been suggested, but
+Various schemes involving link() have been suggested, but
these tend to involve busy-wait, which is also subdesirable.
=head2 I still don't get locking. I just want to increment the number in the file. How can I do this?
Anyway, this is what you can do if you can't help yourself.
- use Fcntl;
+ use Fcntl ':flock';
sysopen(FH, "numfile", O_RDWR|O_CREAT) or die "can't open numfile: $!";
- flock(FH, 2) or die "can't flock numfile: $!";
+ flock(FH, LOCK_EX) or die "can't flock numfile: $!";
$num = <FH> || 0;
seek(FH, 0, 0) or die "can't rewind numfile: $!";
truncate(FH, 0) or die "can't truncate numfile: $!";
(print FH $num+1, "\n") or die "can't write numfile: $!";
- # DO NOT UNLOCK THIS UNTIL YOU CLOSE
+ # Perl as of 5.004 automatically flushes before unlocking
+ flock(FH, LOCK_UN) or die "can't flock numfile: $!";
close FH or die "can't close numfile: $!";
Here's a much better web-page hit counter:
seek(FH, $recno * $RECSIZE, 0);
read(FH, $record, $RECSIZE) == $RECSIZE || die "can't read record $recno: $!";
# munge the record
- seek(FH, $recno * $RECSIZE, 0);
+ seek(FH, -$RECSIZE, 1);
print FH $record;
close FH;
Here's an example:
$write_secs = (stat($file))[9];
- print "file $file updated at ", scalar(localtime($file)), "\n";
+ printf "file %s updated at %s\n", $file,
+ scalar localtime($write_secs);
If you prefer something more legible, use the File::stat module
(part of the standard distribution in version 5.004 and later):
+ # error checking left as an exercise for reader.
use File::stat;
use Time::localtime;
$date_string = ctime(stat($file)->mtime);
print "file $file updated at $date_string\n";
-Error checking is left as an exercise for the reader.
+The POSIX::strftime() approach has the benefit of being,
+in theory, independent of the current locale. See L<perllocale>
+for details.
=head2 How do I set a file's timestamp in perl?
($atime, $mtime) = (stat($timestamp))[8,9];
utime $atime, $mtime, @ARGV;
-Error checking is left as an exercise for the reader.
+Error checking is, as usual, left as an exercise for the reader.
Note that utime() currently doesn't work correctly with Win95/NT
ports. A bug has been reported. Check it carefully before using
written in Perl and offers much greater functionality
than the stock version.
+=head2 How can I read in an entire file all at once?
+
+The customary Perl approach for processing all the lines in a file is to
+do so one line at a time:
+
+ open (INPUT, $file) || die "can't open $file: $!";
+ while (<INPUT>) {
+ chomp;
+ # do something with $_
+ }
+ close(INPUT) || die "can't close $file: $!";
+
+This is tremendously more efficient than reading the entire file into
+memory as an array of lines and then processing it one element at a time,
+which is often -- if not almost always -- the wrong approach. Whenever
+you see someone do this:
+
+ @lines = <INPUT>;
+
+You should think long and hard about why you need everything loaded
+at once. It's just not a scalable solution. You might also find it
+more fun to use the standard DB_File module's $DB_RECNO bindings,
+which allow you to tie an array to a file so that accessing an element
+the array actually accesses the corresponding line in the file.
+
+On very rare occasion, you may have an algorithm that demands that
+the entire file be in memory at once as one scalar. The simplest solution
+to that is:
+
+ $var = `cat $file`;
+
+Being in scalar context, you get the whole thing. In list context,
+you'd get a list of all the lines:
+
+ @lines = `cat $file`;
+
+This tiny but expedient solution is neat, clean, and portable to
+all systems on which decent tools have been installed. For those
+who prefer not to use the toolbox, you can of course read the file
+manually, although this makes for more complicated code.
+
+ {
+ local(*INPUT, $/);
+ open (INPUT, $file) || die "can't open $file: $!";
+ $var = <INPUT>;
+ }
+
+That temporarily undefs your record separator, and will automatically
+close the file at block exit. If the file is already open, just use this:
+
+ $var = do { local $/; <INPUT> };
+
=head2 How can I read in a file by paragraphs?
-Use the C<$\> variable (see L<perlvar> for details). You can either
+Use the C<$/> variable (see L<perlvar> for details). You can either
set it to C<""> to eliminate empty paragraphs (C<"abc\n\n\n\ndef">,
for instance, gets treated as two paragraphs and not three), or
C<"\n\n"> to accept empty paragraphs.
+Note that a blank line must have no blanks in it. Thus C<"fred\n
+\nstuff\n\n"> is one paragraph, but C<"fred\n\nstuff\n\n"> is two.
+
=head2 How can I read a single character from a file? From the keyboard?
You can use the builtin C<getc()> function for most filehandles, but
the Term::ReadKey module from CPAN, or use the sample code in
L<perlfunc/getc>.
-If your system supports POSIX, you can use the following code, which
-you'll note turns off echo processing as well.
+If your system supports the portable operating system programming
+interface (POSIX), you can use the following code, which you'll note
+turns off echo processing as well.
#!/usr/bin/perl -w
use strict;
END { cooked() }
-The Term::ReadKey module from CPAN may be easier to use:
+The Term::ReadKey module from CPAN may be easier to use. Recent version
+include also support for non-portable systems as well.
use Term::ReadKey;
open(TTY, "</dev/tty");
printf "\nYou said %s, char number %03d\n",
$key, ord $key;
-For DOS systems, Dan Carson <dbc@tc.fluke.COM> reports the following:
+For legacy DOS systems, Dan Carson <dbc@tc.fluke.COM> reports the following:
To put the PC in "raw" mode, use ioctl with some magic numbers gleaned
from msdos.c (Perl source file) and Ralf Brown's interrupt list (comes
This is all trial and error I did a long time ago, I hope I'm reading the
file that worked.
-=head2 How can I tell if there's a character waiting on a filehandle?
+=head2 How can I tell whether there's a character waiting on a filehandle?
The very first thing you should do is look into getting the Term::ReadKey
-extension from CPAN. It now even has limited support for closed, proprietary
-(read: not open systems, not POSIX, not Unix, etc) systems.
+extension from CPAN. As we mentioned earlier, it now even has limited
+support for non-portable (read: not open systems, closed, proprietary,
+not POSIX, not Unix, etc) systems.
You should also check out the Frequently Asked Questions list in
comp.unix.* for things like this: the answer is essentially the same.
return $nfd = select($rin,undef,undef,0);
}
-If you want to find out how many characters are waiting,
-there's also the FIONREAD ioctl call to be looked at.
-
-The I<h2ph> tool that comes with Perl tries to convert C include
-files to Perl code, which can be C<require>d. FIONREAD ends
-up defined as a function in the I<sys/ioctl.ph> file:
+If you want to find out how many characters are waiting, there's
+also the FIONREAD ioctl call to be looked at. The I<h2ph> tool that
+comes with Perl tries to convert C include files to Perl code, which
+can be C<require>d. FIONREAD ends up defined as a function in the
+I<sys/ioctl.ph> file:
require 'sys/ioctl.ph';
printf("%#08x\n", FIONREAD);
}
^D
- % cc -o fionread fionread
+ % cc -o fionread fionread.c
% ./fionread
0x4004667f
filehandle. The method: read until end of file, clearerr(), read some
more. Lather, rinse, repeat.
+There's also a File::Tail module from CPAN.
+
=head2 How do I dup() a filehandle in Perl?
If you check L<perlfunc/open>, you'll see that several of the ways
$fd = $ENV{MHCONTEXTFD};
open(MHCONTEXT, "<&=$fd"); # like fdopen(3S)
-Note that "E<lt>&STDIN" makes a copy, but "E<lt>&=STDIN" make
+Note that "<&STDIN" makes a copy, but "<&=STDIN" make
an alias. That means if you close an aliased handle, all
aliases become inaccessible. This is not true with
a copied one.
$rc = syscall(&SYS_close, $fd + 0); # must force numeric
die "can't sysclose $fd: $!" unless $rc == -1;
+Or just use the fdopen(3S) feature of open():
+
+ {
+ local *F;
+ open F, "<&=$fd" or die "Cannot reopen fd=$fd: $!";
+ close F;
+ }
+
=head2 Why can't I use "C:\temp\foo" in DOS paths? What doesn't `C:\temp\foo.exe` work?
Whoops! You just put a tab and a formfeed into that filename!
backslash is an escape character. The full list of these is in
L<perlop/Quote and Quote-like Operators>. Unsurprisingly, you don't
have a file called "c:(tab)emp(formfeed)oo" or
-"c:(tab)emp(formfeed)oo.exe" on your DOS filesystem.
+"c:(tab)emp(formfeed)oo.exe" on your legacy DOS filesystem.
Either single-quote your strings, or (preferably) use forward slashes.
Since all DOS and Windows versions since something like MS-DOS 2.0 or so
have treated C</> and C<\> the same in a path, you might as well use the
one that doesn't clash with Perl -- or the POSIX shell, ANSI C and C++,
-awk, Tcl, Java, or Python, just to mention a few.
+awk, Tcl, Java, or Python, just to mention a few. POSIX paths
+are more portable, too.
=head2 Why doesn't glob("*.*") get all the files?
Because even on non-Unix ports, Perl's glob function follows standard
Unix globbing semantics. You'll need C<glob("*")> to get all (non-hidden)
-files. This makes glob() portable.
+files. This makes glob() portable even to legacy systems. Your
+port may include proprietary globbing functions as well. Check its
+documentation for details.
=head2 Why does Perl let me delete read-only files? Why does C<-i> clobber protected files? Isn't this a bug in Perl?
file in. A simple proof by induction is available upon
request if you doubt its correctness.
+=head2 Why do I get weird spaces when I print an array of lines?
+
+Saying
+
+ print "@lines\n";
+
+joins together the elements of C<@lines> with a space between them.
+If C<@lines> were C<("little", "fluffy", "clouds")> then the above
+statement would print:
+
+ little fluffy clouds
+
+but if each element of C<@lines> was a line of text, ending a newline
+character C<("little\n", "fluffy\n", "clouds\n")> then it would print:
+
+ little
+ fluffy
+ clouds
+
+If your array contains lines, just print them:
+
+ print @lines;
+
=head1 AUTHOR AND COPYRIGHT
-Copyright (c) 1997, 1998 Tom Christiansen and Nathan Torkington.
+Copyright (c) 1997-1999 Tom Christiansen and Nathan Torkington.
All rights reserved.
-When included as part of the Standard Version of Perl, or as part of
-its complete documentation whether printed or otherwise, this work
-may be distributed only under the terms of Perl's Artistic License.
-Any distribution of this file or derivatives thereof I<outside>
-of that package require that special arrangements be made with
-copyright holder.
-
-Irrespective of its distribution, all code examples in this file
-are hereby placed into the public domain. You are permitted and
-encouraged to use this code in your own programs for fun
-or for profit as you see fit. A simple comment in the code giving
-credit would be courteous but is not required.
+When included as an integrated part of the Standard Distribution
+of Perl or of its documentation (printed or otherwise), this works is
+covered under Perl's Artistic License. For separate distributions of
+all or part of this FAQ outside of that, see L<perlfaq>.
+
+Irrespective of its distribution, all code examples here are in the public
+domain. You are permitted and encouraged to use this code and any
+derivatives thereof in your own programs for fun or for profit as you
+see fit. A simple comment in the code giving credit to the FAQ would
+be courteous but is not required.