=head1 NAME
-perlfaq5 - Files and Formats ($Revision: 1.21 $, $Date: 1997/04/23 18:05:19 $)
+perlfaq5 - Files and Formats ($Revision: 1.38 $, $Date: 1999/05/23 16:08:30 $)
=head1 DESCRIPTION
This section deals with I/O and the "f" issues: filehandles, flushing,
formats, and footers.
-=head2 How do I flush/unbuffer a filehandle? Why must I do this?
+=head2 How do I flush/unbuffer an output filehandle? Why must I do this?
The C standard I/O library (stdio) normally buffers characters sent to
-devices. This is done for efficiency reasons, so that there isn't a
+devices. This is done for efficiency reasons so that there isn't a
system call for each byte. Any time you use print() or write() in
Perl, you go though this buffering. syswrite() circumvents stdio and
buffering.
-In most stdio implementations, the type of buffering and the size of
+In most stdio implementations, the type of output buffering and the size of
the buffer varies according to the type of device. Disk files are block
buffered, often with a buffer size of more than 2k. Pipes and sockets
are often buffered with a buffer size between 1/2 and 2k. Serial devices
get the output where you want it when you want it.
If you expect characters to get to your device when you print them there,
-you'll want to autoflush its handle, as in the older:
+you'll want to autoflush its handle.
+Use select() and the C<$|> variable to control autoflushing
+(see L<perlvar/$|> and L<perlfunc/select>):
+
+ $old_fh = select(OUTPUT_HANDLE);
+ $| = 1;
+ select($old_fh);
+
+Or using the traditional idiom:
+
+ select((select(OUTPUT_HANDLE), $| = 1)[0]);
+
+Or if don't mind slowly loading several thousand lines of module code
+just because you're afraid of the C<$|> variable:
use FileHandle;
- open(DEV, "<+/dev/tty"); # ceci n'est pas une pipe
+ open(DEV, "+</dev/tty"); # ceci n'est pas une pipe
DEV->autoflush(1);
or the newer IO::* modules:
die "$!" unless $sock;
$sock->autoflush();
- $sock->print("GET /\015\012");
- $document = join('', $sock->getlines());
+ print $sock "GET / HTTP/1.0" . "\015\012" x 2;
+ $document = join('', <$sock>);
print "DOC IS: $document\n";
-Note the hardcoded carriage return and newline in their octal
-equivalents. This is the ONLY way (currently) to assure a proper
-flush on all platforms, including Macintosh.
-
-You can use select() and the C<$|> variable to control autoflushing
-(see L<perlvar/$|> and L<perlfunc/select>):
-
- $oldh = select(DEV);
- $| = 1;
- select($oldh);
+Note the bizarrely hardcoded carriage return and newline in their octal
+equivalents. This is the ONLY way (currently) to assure a proper flush
+on all platforms, including Macintosh. That's the way things work in
+network programming: you really should specify the exact bit pattern
+on the network line terminator. In practice, C<"\n\n"> often works,
+but this is not portable.
-You'll also see code that does this without a temporary variable, as in
-
- select((select(DEV), $| = 1)[0]);
+See L<perlfaq9> for other examples of fetching URLs over the web.
=head2 How do I change one line in a file/delete a line in a file/insert a line in the middle of a file/append to the beginning of a file?
-Although humans have an easy time thinking of a text file as being a
-sequence of lines that operates much like a stack of playing cards --
-or punch cards -- computers usually see the text file as a sequence of
-bytes. In general, there's no direct way for Perl to seek to a
-particular line of a file, insert text into a file, or remove text
-from a file.
+Those are operations of a text editor. Perl is not a text editor.
+Perl is a programming language. You have to decompose the problem into
+low-level calls to read, write, open, close, and seek.
-(There are exceptions in special circumstances. Replacing a sequence
-of bytes with another sequence of the same length is one. Another is
-using the C<$DB_RECNO> array bindings as documented in L<DB_File>.
-Yet another is manipulating files with all lines the same length.)
+Although humans have an easy time thinking of a text file as being a
+sequence of lines that operates much like a stack of playing cards--or
+punch cards--computers usually see the text file as a sequence of bytes.
+In general, there's no direct way for Perl to seek to a particular line
+of a file, insert text into a file, or remove text from a file.
+
+(There are exceptions in special circumstances. You can add or remove
+data at the very end of the file. A sequence of bytes can be replaced
+with another sequence of the same length. The C<$DB_RECNO> array
+bindings as documented in L<DB_File> also provide a direct way of
+modifying a file. Files where all lines are the same length are also
+easy to alter.)
The general solution is to create a temporary copy of the text file with
-the changes you want, then copy that over the original.
+the changes you want, then copy that over the original. This assumes
+no locking.
$old = $file;
$new = "$file.tmp.$$";
- $bak = "$file.bak";
+ $bak = "$file.orig";
open(OLD, "< $old") or die "can't open $old: $!";
open(NEW, "> $new") or die "can't open $new: $!";
perl -pi -e 's/(^\s+test\s+)\d+/ $1 . ++$count /e' t/op/taint.t
# form a script
- local($^I, @ARGV) = ('.bak', glob("*.c"));
+ local($^I, @ARGV) = ('.orig', glob("*.c"));
while (<>) {
if ($. == 1) {
print "This line should appear at the top of each file\n";
}
close FILE;
+This assumes no funny games with newline translations.
+
=head2 How do I make a temporary file name?
-Use the process ID and/or the current time-value. If you need to have
-many temporary files in one process, use a counter:
+Use the C<new_tmpfile> class method from the IO::File module to get a
+filehandle opened for reading and writing. Use it if you don't
+need to know the file's name:
+
+ use IO::File;
+ $fh = IO::File->new_tmpfile()
+ or die "Unable to make new temporary file: $!";
+
+If you do need to know the file's name, you can use the C<tmpnam>
+function from the POSIX module to get a filename that you then open
+yourself:
+
+
+ use Fcntl;
+ use POSIX qw(tmpnam);
+
+ # try new temporary filenames until we get one that didn't already
+ # exist; the check should be unnecessary, but you can't be too careful
+ do { $name = tmpnam() }
+ until sysopen(FH, $name, O_RDWR|O_CREAT|O_EXCL);
+
+ # install atexit-style handler so that when we exit or die,
+ # we automatically delete this temporary file
+ END { unlink($name) or die "Couldn't unlink $name : $!" }
+
+ # now go on to use the file ...
+
+If you're committed to creating a temporary file by hand, use the
+process ID and/or the current time-value. If you need to have many
+temporary files in one process, use a counter:
BEGIN {
- use IO::File;
use Fcntl;
my $temp_dir = -d '/tmp' ? '/tmp' : $ENV{TMP} || $ENV{TEMP};
my $base_name = sprintf("%s/%d-%d-0000", $temp_dir, $$, time());
sub temp_file {
- my $fh = undef;
+ local *FH;
my $count = 0;
- until (defined($fh) || $count > 100) {
+ until (defined(fileno(FH)) || $count++ > 100) {
$base_name =~ s/-(\d+)$/"-" . (1 + $1)/e;
- $fh = IO::File->new($base_name, O_WRONLY|O_EXCL|O_CREAT, 0644)
+ sysopen(FH, $base_name, O_WRONLY|O_EXCL|O_CREAT);
}
- if (defined($fh)) {
- return ($fh, $base_name);
+ if (defined(fileno(FH))
+ return (*FH, $base_name);
} else {
return ();
}
}
}
-Or you could simply use IO::Handle::new_tmpfile.
-
=head2 How can I manipulate fixed-record-length files?
-The most efficient way is using pack() and unpack(). This is faster
-than using substr(). Here is a sample chunk of code to break up and
-put back together again some fixed-format input lines, in this case
-from the output of a normal, Berkeley-style ps:
+The most efficient way is using pack() and unpack(). This is faster than
+using substr() when taking many, many strings. It is slower for just a few.
+
+Here is a sample chunk of code to break up and put back together again
+some fixed-format input lines, in this case from the output of a normal,
+Berkeley-style ps:
# sample input line:
# 15158 p5 T 0:00 perl /home/tchrist/scripts/now-what
$PS_T = 'A6 A4 A7 A5 A*';
open(PS, "ps|");
- $_ = <PS>; print;
+ print scalar <PS>;
while (<PS>) {
($pid, $tt, $stat, $time, $command) = unpack($PS_T, $_);
for $var (qw!pid tt stat time command!) {
"\n";
}
+We've used C<$$var> in a way that forbidden by C<use strict 'refs'>.
+That is, we've promoted a string to a scalar variable reference using
+symbolic references. This is ok in small programs, but doesn't scale
+well. It also only works on global variables, not lexicals.
+
=head2 How can I make a filehandle local to a subroutine? How do I pass filehandles between subroutines? How do I make an array of filehandles?
-You may have some success with typeglobs, as we always had to use
-in days of old:
+The fastest, simplest, and most direct way is to localize the typeglob
+of the filehandle in question:
- local(*FH);
+ local *TmpHandle;
-But while still supported, that isn't the best to go about getting
-local filehandles. Typeglobs have their drawbacks. You may well want
-to use the C<FileHandle> module, which creates new filehandles for you
-(see L<FileHandle>):
+Typeglobs are fast (especially compared with the alternatives) and
+reasonably easy to use, but they also have one subtle drawback. If you
+had, for example, a function named TmpHandle(), or a variable named
+%TmpHandle, you just hid it from yourself.
- use FileHandle;
sub findme {
- my $fh = FileHandle->new();
- open($fh, "</etc/hosts") or die "no /etc/hosts: $!";
- while (<$fh>) {
+ local *HostFile;
+ open(HostFile, "</etc/hosts") or die "no /etc/hosts: $!";
+ local $_; # <- VERY IMPORTANT
+ while (<HostFile>) {
print if /\b127\.(0\.0\.)?1\b/;
}
- # $fh automatically closes/disappears here
+ # *HostFile automatically closes/disappears here
+ }
+
+Here's how to use typeglobs in a loop to open and store a bunch of
+filehandles. We'll use as values of the hash an ordered
+pair to make it easy to sort the hash in insertion order.
+
+ @names = qw(motd termcap passwd hosts);
+ my $i = 0;
+ foreach $filename (@names) {
+ local *FH;
+ open(FH, "/etc/$filename") || die "$filename: $!";
+ $file{$filename} = [ $i++, *FH ];
}
-Internally, Perl believes filehandles to be of class IO::Handle. You
-may use that module directly if you'd like (see L<IO::Handle>), or
-one of its more specific derived classes.
+ # Using the filehandles in the array
+ foreach $name (sort { $file{$a}[0] <=> $file{$b}[0] } keys %file) {
+ my $fh = $file{$name}[1];
+ my $line = <$fh>;
+ print "$name $. $line";
+ }
+
+For passing filehandles to functions, the easiest way is to
+preface them with a star, as in func(*STDIN).
+See L<perlfaq7/"Passing Filehandles"> for details.
+
+If you want to create many anonymous handles, you should check out the
+Symbol, FileHandle, or IO::Handle (etc.) modules. Here's the equivalent
+code with Symbol::gensym, which is reasonably light-weight:
+
+ foreach $filename (@names) {
+ use Symbol;
+ my $fh = gensym();
+ open($fh, "/etc/$filename") || die "open /etc/$filename: $!";
+ $file{$filename} = [ $i++, $fh ];
+ }
-Once you have IO::File or FileHandle objects, you can pass them
-between subroutines or store them in hashes as you would any other
-scalar values:
+Here's using the semi-object-oriented FileHandle module, which certainly
+isn't light-weight:
use FileHandle;
- # Storing filehandles in a hash and array
foreach $filename (@names) {
- my $fh = new FileHandle($filename) or die;
- $file{$filename} = $fh;
- push(@files, $fh);
+ my $fh = FileHandle->new("/etc/$filename") or die "$filename: $!";
+ $file{$filename} = [ $i++, $fh ];
}
- # Using the filehandles in the array
- foreach $file (@files) {
- print $file "Testing\n";
+Please understand that whether the filehandle happens to be a (probably
+localized) typeglob or an anonymous handle from one of the modules
+in no way affects the bizarre rules for managing indirect handles.
+See the next question.
+
+=head2 How can I use a filehandle indirectly?
+
+An indirect filehandle is using something other than a symbol
+in a place that a filehandle is expected. Here are ways
+to get indirect filehandles:
+
+ $fh = SOME_FH; # bareword is strict-subs hostile
+ $fh = "SOME_FH"; # strict-refs hostile; same package only
+ $fh = *SOME_FH; # typeglob
+ $fh = \*SOME_FH; # ref to typeglob (bless-able)
+ $fh = *SOME_FH{IO}; # blessed IO::Handle from *SOME_FH typeglob
+
+Or, you can use the C<new> method from the FileHandle or IO modules to
+create an anonymous filehandle, store that in a scalar variable,
+and use it as though it were a normal filehandle.
+
+ use FileHandle;
+ $fh = FileHandle->new();
+
+ use IO::Handle; # 5.004 or higher
+ $fh = IO::Handle->new();
+
+Then use any of those as you would a normal filehandle. Anywhere that
+Perl is expecting a filehandle, an indirect filehandle may be used
+instead. An indirect filehandle is just a scalar variable that contains
+a filehandle. Functions like C<print>, C<open>, C<seek>, or
+the C<< <FH> >> diamond operator will accept either a read filehandle
+or a scalar variable containing one:
+
+ ($ifh, $ofh, $efh) = (*STDIN, *STDOUT, *STDERR);
+ print $ofh "Type it: ";
+ $got = <$ifh>
+ print $efh "What was that: $got";
+
+If you're passing a filehandle to a function, you can write
+the function in two ways:
+
+ sub accept_fh {
+ my $fh = shift;
+ print $fh "Sending to indirect filehandle\n";
}
- # You have to do the { } ugliness when you're specifying the
- # filehandle by anything other than a simple scalar variable.
- print { $files[2] } "Testing\n";
+Or it can localize a typeglob and use the filehandle directly:
- # Passing filehandles to subroutines
- sub debug {
- my $filehandle = shift;
- printf $filehandle "DEBUG: ", @_;
+ sub accept_fh {
+ local *FH = shift;
+ print FH "Sending to localized filehandle\n";
}
- debug($fh, "Testing\n");
+Both styles work with either objects or typeglobs of real filehandles.
+(They might also work with strings under some circumstances, but this
+is risky.)
+
+ accept_fh(*STDOUT);
+ accept_fh($handle);
+
+In the examples above, we assigned the filehandle to a scalar variable
+before using it. That is because only simple scalar variables, not
+expressions or subscripts of hashes or arrays, can be used with
+built-ins like C<print>, C<printf>, or the diamond operator. Using
+something other than a simple scalar varaible as a filehandle is
+illegal and won't even compile:
+
+ @fd = (*STDIN, *STDOUT, *STDERR);
+ print $fd[1] "Type it: "; # WRONG
+ $got = <$fd[0]> # WRONG
+ print $fd[2] "What was that: $got"; # WRONG
+
+With C<print> and C<printf>, you get around this by using a block and
+an expression where you would place the filehandle:
+
+ print { $fd[1] } "funny stuff\n";
+ printf { $fd[1] } "Pity the poor %x.\n", 3_735_928_559;
+ # Pity the poor deadbeef.
+
+That block is a proper block like any other, so you can put more
+complicated code there. This sends the message out to one of two places:
+
+ $ok = -x "/bin/cat";
+ print { $ok ? $fd[1] : $fd[2] } "cat stat $ok\n";
+ print { $fd[ 1+ ($ok || 0) ] } "cat stat $ok\n";
+
+This approach of treating C<print> and C<printf> like object methods
+calls doesn't work for the diamond operator. That's because it's a
+real operator, not just a function with a comma-less argument. Assuming
+you've been storing typeglobs in your structure as we did above, you
+can use the built-in function named C<readline> to reads a record just
+as C<< <> >> does. Given the initialization shown above for @fd, this
+would work, but only because readline() require a typeglob. It doesn't
+work with objects or strings, which might be a bug we haven't fixed yet.
+
+ $got = readline($fd[0]);
+
+Let it be noted that the flakiness of indirect filehandles is not
+related to whether they're strings, typeglobs, objects, or anything else.
+It's the syntax of the fundamental operators. Playing the object
+game doesn't help you at all here.
=head2 How can I set up a footer format to be used with write()?
=head2 How can I write() into a string?
-See L<perlform> for an swrite() function.
+See L<perlform/"Accessing Formatting Internals"> for an swrite() function.
=head2 How can I output my numbers with commas added?
sub commify {
local $_ = shift;
- 1 while s/^(-?\d+)(\d{3})/$1,$2/;
+ 1 while s/^([-+]?\d+)(\d{3})/$1,$2/;
return $_;
}
You can't just:
- s/^(-?\d+)(\d{3})/$1,$2/g;
+ s/^([-+]?\d+)(\d{3})/$1,$2/g;
because you have to put the comma in and then recalculate your
position.
-Alternatively, this commifies all numbers in a line regardless of
+Alternatively, this code commifies all numbers in a line regardless of
whether they have decimal portions, are preceded by + or -, or
whatever:
my $input = shift;
$input = reverse $input;
$input =~ s<(\d\d\d)(?=\d)(?!\d*\.)><$1,>g;
- return reverse $input;
+ return scalar reverse $input;
}
=head2 How can I translate tildes (~) in a filename?
-Use the E<lt>E<gt> (glob()) operator, documented in L<perlfunc>. This
-requires that you have a shell installed that groks tildes, meaning
-csh or tcsh or (some versions of) ksh, and thus may have portability
-problems. The Glob::KGlob module (available from CPAN) gives more
-portable glob functionality.
+Use the <> (glob()) operator, documented in L<perlfunc>. Older
+versions of Perl require that you have a shell installed that groks
+tildes. Recent perl versions have this feature built in. The
+Glob::KGlob module (available from CPAN) gives more portable glob
+functionality.
Within Perl, you may use this directly:
: ( $ENV{HOME} || $ENV{LOGDIR} )
}ex;
-=head2 How come when I open the file read-write it wipes it out?
+=head2 How come when I open a file read-write it wipes it out?
Because you're using something like this, which truncates the file and
I<then> gives you read-write access:
- open(FH, "+> /path/name"); # WRONG
+ open(FH, "+> /path/name"); # WRONG (almost always)
Whoops. You should instead use this, which will fail if the file
-doesn't exist.
+doesn't exist.
- open(FH, "+< /path/name"); # open for update
+ open(FH, "+< /path/name"); # open for update
-If this is an issue, try:
+Using ">" always clobbers or creates. Using "<" never does
+either. The "+" doesn't change this.
- sysopen(FH, "/path/name", O_RDWR|O_CREAT, 0644);
+Here are examples of many kinds of file opens. Those using sysopen()
+all assume
-Error checking is left as an exercise for the reader.
+ use Fcntl;
+
+To open file for reading:
+
+ open(FH, "< $path") || die $!;
+ sysopen(FH, $path, O_RDONLY) || die $!;
+
+To open file for writing, create new file if needed or else truncate old file:
+
+ open(FH, "> $path") || die $!;
+ sysopen(FH, $path, O_WRONLY|O_TRUNC|O_CREAT) || die $!;
+ sysopen(FH, $path, O_WRONLY|O_TRUNC|O_CREAT, 0666) || die $!;
+
+To open file for writing, create new file, file must not exist:
+
+ sysopen(FH, $path, O_WRONLY|O_EXCL|O_CREAT) || die $!;
+ sysopen(FH, $path, O_WRONLY|O_EXCL|O_CREAT, 0666) || die $!;
+
+To open file for appending, create if necessary:
+
+ open(FH, ">> $path") || die $!;
+ sysopen(FH, $path, O_WRONLY|O_APPEND|O_CREAT) || die $!;
+ sysopen(FH, $path, O_WRONLY|O_APPEND|O_CREAT, 0666) || die $!;
+
+To open file for appending, file must exist:
+
+ sysopen(FH, $path, O_WRONLY|O_APPEND) || die $!;
+
+To open file for update, file must exist:
+
+ open(FH, "+< $path") || die $!;
+ sysopen(FH, $path, O_RDWR) || die $!;
+
+To open file for update, create file if necessary:
+
+ sysopen(FH, $path, O_RDWR|O_CREAT) || die $!;
+ sysopen(FH, $path, O_RDWR|O_CREAT, 0666) || die $!;
+
+To open file for update, file must not exist:
+
+ sysopen(FH, $path, O_RDWR|O_EXCL|O_CREAT) || die $!;
+ sysopen(FH, $path, O_RDWR|O_EXCL|O_CREAT, 0666) || die $!;
+
+To open a file without blocking, creating if necessary:
+
+ sysopen(FH, "/tmp/somefile", O_WRONLY|O_NDELAY|O_CREAT)
+ or die "can't open /tmp/somefile: $!":
+
+Be warned that neither creation nor deletion of files is guaranteed to
+be an atomic operation over NFS. That is, two processes might both
+successfully create or unlink the same file! Therefore O_EXCL
+isn't as exclusive as you might wish.
+
+See also the new L<perlopentut> if you have it (new for 5.6).
=head2 Why do I sometimes get an "Argument list too long" when I use <*>?
-The C<E<lt>E<gt>> operator performs a globbing operation (see above).
-By default glob() forks csh(1) to do the actual glob expansion, but
+The C<< <> >> operator performs a globbing operation (see above).
+In Perl versions earlier than v5.6.0, the internal glob() operator forks
+csh(1) to do the actual glob expansion, but
csh can't handle more than 127 items and so gives the error message
C<Argument list too long>. People who installed tcsh as csh won't
have this problem, but their users may be surprised by it.
-To get around this, either do the glob yourself with C<Dirhandle>s and
-patterns, or use a module like Glob::KGlob, one that doesn't use the
-shell to do globbing.
+To get around this, either upgrade to Perl v5.6.0 or later, do the glob
+yourself with readdir() and patterns, or use a module like Glob::KGlob,
+one that doesn't use the shell to do globbing.
=head2 Is there a leak/bug in glob()?
Due to the current implementation on some operating systems, when you
use the glob() function or its angle-bracket alias in a scalar
-context, you may cause a leak and/or unpredictable behavior. It's
+context, you may cause a memory leak and/or unpredictable behavior. It's
best therefore to use glob() only in list context.
-=head2 How can I open a file with a leading "E<gt>" or trailing blanks?
+=head2 How can I open a file with a leading ">" or trailing blanks?
Normally perl ignores trailing blanks in filenames, and interprets
certain leading characters (or a trailing "|") to mean something
-special. To avoid this, you might want to use a routine like this.
-It makes incomplete pathnames into explicit relative ones, and tacks a
+special. To avoid this, you might want to use a routine like the one below.
+It turns incomplete pathnames into explicit relative ones, and tacks a
trailing null byte on the name to make perl leave it alone:
sub safe_filename {
local $_ = shift;
- return m#^/#
- ? "$_\0"
- : "./$_\0";
+ s#^([^./])#./$1#;
+ $_ .= "\0";
+ return $_;
}
- $fn = safe_filename("<<<something really wicked ");
- open(FH, "> $fn") or "couldn't open $fn: $!";
+ $badpath = "<<<something really wicked ";
+ $fn = safe_filename($badpath");
+ open(FH, "> $fn") or "couldn't open $badpath: $!";
+
+This assumes that you are using POSIX (portable operating systems
+interface) paths. If you are on a closed, non-portable, proprietary
+system, you may have to adjust the C<"./"> above.
+
+It would be a lot clearer to use sysopen(), though:
+
+ use Fcntl;
+ $badpath = "<<<something really wicked ";
+ sysopen (FH, $badpath, O_WRONLY | O_CREAT | O_TRUNC)
+ or die "can't open $badpath: $!";
-You could also use the sysopen() function (see L<perlfunc/sysopen>).
+For more information, see also the new L<perlopentut> if you have it
+(new for 5.6).
=head2 How can I reliably rename a file?
-Well, usually you just use Perl's rename() function. But that may
-not work everywhere, in particular, renaming files across file systems.
-If your operating system supports a mv(1) program or its moral equivalent,
-this works:
+Well, usually you just use Perl's rename() function. That may not
+work everywhere, though, particularly when renaming files across file systems.
+Some sub-Unix systems have broken ports that corrupt the semantics of
+rename()--for example, WinNT does this right, but Win95 and Win98
+are broken. (The last two parts are not surprising, but the first is. :-)
+
+If your operating system supports a proper mv(1) program or its moral
+equivalent, this works:
rename($old, $new) or system("mv", $old, $new);
It may be more compelling to use the File::Copy module instead. You
just copy to the new file to the new name (checking return values),
-then delete the old one. This isn't really the same semantics as a
+then delete the old one. This isn't really the same semantically as a
real rename(), though, which preserves metainformation like
permissions, timestamps, inode info, etc.
+Newer versions of File::Copy exports a move() function.
+
=head2 How can I lock a file?
Perl's builtin flock() function (see L<perlfunc> for details) will call
=item 3
-Some versions of flock() can't lock files over a network (e.g. on NFS
-file systems), so you'd need to force the use of fcntl(2) when you
-build Perl. See the flock entry of L<perlfunc>, and the F<INSTALL>
-file in the source distribution for information on building Perl to do
-this.
+Some versions of flock() can't lock files over a network (e.g. on NFS file
+systems), so you'd need to force the use of fcntl(2) when you build Perl.
+But even this is dubious at best. See the flock entry of L<perlfunc>
+and the F<INSTALL> file in the source distribution for information on
+building Perl to do this.
+
+Two potentially non-obvious but traditional flock semantics are that
+it waits indefinitely until the lock is granted, and that its locks are
+I<merely advisory>. Such discretionary locks are more flexible, but
+offer fewer guarantees. This means that files locked with flock() may
+be modified by programs that do not also use flock(). Cars that stop
+for red lights get on well with each other, but not with cars that don't
+stop for red lights. See the perlport manpage, your port's specific
+documentation, or your system-specific local manpages for details. It's
+best to assume traditional behavior if you're writing portable programs.
+(If you're not, you should as always feel perfectly free to write
+for your own system's idiosyncrasies (sometimes called "features").
+Slavish adherence to portability concerns shouldn't get in the way of
+your getting your job done.)
+
+For more information on file locking, see also
+L<perlopentut/"File Locking"> if you have it (new for 5.6).
=back
-The CPAN module File::Lock offers similar functionality and (if you
-have dynamic loading) won't require you to rebuild perl if your
-flock() can't lock network files.
-
-=head2 What can't I just open(FH, ">file.lock")?
+=head2 Why can't I just open(FH, ">file.lock")?
A common bit of code B<NOT TO USE> is this:
which must be done in one. That's why computer hardware provides an
atomic test-and-set instruction. In theory, this "ought" to work:
- sysopen(FH, "file.lock", O_WRONLY|O_EXCL|O_CREAT, 0644)
+ sysopen(FH, "file.lock", O_WRONLY|O_EXCL|O_CREAT)
or die "can't open file.lock: $!":
except that lamentably, file creation (and deletion) is not atomic
over NFS, so this won't work (at least, not every time) over the net.
-Various schemes involving involving link() have been suggested, but
+Various schemes involving link() have been suggested, but
these tend to involve busy-wait, which is also subdesirable.
-=head2 I still don't get locking. I just want to increment the number
-in the file. How can I do this?
+=head2 I still don't get locking. I just want to increment the number in the file. How can I do this?
Didn't anyone ever tell you web-page hit counters were useless?
+They don't count number of hits, they're a waste of time, and they serve
+only to stroke the writer's vanity. It's better to pick a random number;
+they're more realistic.
-Anyway, this is what to do:
+Anyway, this is what you can do if you can't help yourself.
- use Fcntl;
- sysopen(FH, "numfile", O_RDWR|O_CREAT, 0644) or die "can't open numfile: $!";
- flock(FH, 2) or die "can't flock numfile: $!";
+ use Fcntl qw(:DEFAULT :flock);
+ sysopen(FH, "numfile", O_RDWR|O_CREAT) or die "can't open numfile: $!";
+ flock(FH, LOCK_EX) or die "can't flock numfile: $!";
$num = <FH> || 0;
seek(FH, 0, 0) or die "can't rewind numfile: $!";
truncate(FH, 0) or die "can't truncate numfile: $!";
(print FH $num+1, "\n") or die "can't write numfile: $!";
- # DO NOT UNLOCK THIS UNTIL YOU CLOSE
close FH or die "can't close numfile: $!";
Here's a much better web-page hit counter:
If the count doesn't impress your friends, then the code might. :-)
+=head2 All I want to do is append a small amount of text to the end of a file. Do I still have to use locking?
+
+If you are on a system that correctly implements flock() and you use the
+example appending code from "perldoc -f flock" everything will be OK
+even if the OS you are on doesn't implement append mode correctly (if
+such a system exists.) So if you are happy to restrict yourself to OSs
+that implement flock() (and that's not really much of a restriction)
+then that is what you should do.
+
+If you know you are only going to use a system that does correctly
+implement appending (i.e. not Win32) then you can omit the seek() from
+the above code.
+
+If you know you are only writing code to run on an OS and filesystem that
+does implement append mode correctly (a local filesystem on a modern
+Unix for example), and you keep the file in block-buffered mode and you
+write less than one buffer-full of output between each manual flushing
+of the buffer then each bufferload is almost garanteed to be written to
+the end of the file in one chunk without getting intermingled with
+anyone else's output. You can also use the syswrite() function which is
+simply a wrapper around your systems write(2) system call.
+
+There is still a small theoretical chance that a signal will interrupt
+the system level write() operation before completion. There is also a
+possibility that some STDIO implementations may call multiple system
+level write()s even if the buffer was empty to start. There may be some
+systems where this probability is reduced to zero.
+
=head2 How do I randomly update a binary file?
If you're just trying to patch a binary, in many cases something as
seek(FH, $recno * $RECSIZE, 0);
read(FH, $record, $RECSIZE) == $RECSIZE || die "can't read record $recno: $!";
# munge the record
- seek(FH, $recno * $RECSIZE, 0);
+ seek(FH, -$RECSIZE, 1);
print FH $record;
close FH;
Locking and error checking are left as an exercise for the reader.
-Don't forget them, or you'll be quite sorry.
-
-Don't forget to set binmode() under DOS-like platforms when operating
-on files that have anything other than straight text in them. See the
-docs on open() and on binmode() for more details.
+Don't forget them or you'll be quite sorry.
=head2 How do I get a file's timestamp in perl?
Here's an example:
$write_secs = (stat($file))[9];
- print "file $file updated at ", scalar(localtime($file)), "\n";
+ printf "file %s updated at %s\n", $file,
+ scalar localtime($write_secs);
If you prefer something more legible, use the File::stat module
(part of the standard distribution in version 5.004 and later):
+ # error checking left as an exercise for reader.
use File::stat;
use Time::localtime;
$date_string = ctime(stat($file)->mtime);
print "file $file updated at $date_string\n";
-Error checking is left as an exercise for the reader.
+The POSIX::strftime() approach has the benefit of being,
+in theory, independent of the current locale. See L<perllocale>
+for details.
=head2 How do I set a file's timestamp in perl?
($atime, $mtime) = (stat($timestamp))[8,9];
utime $atime, $mtime, @ARGV;
-Error checking is left as an exercise for the reader.
+Error checking is, as usual, left as an exercise for the reader.
Note that utime() currently doesn't work correctly with Win95/NT
ports. A bug has been reported. Check it carefully before using
-it on those platforms.
+utime() on those platforms.
=head2 How do I print to more than one file at once?
open (FH, "| tee file1 file2 file3");
-Otherwise you'll have to write your own multiplexing print function --
-or your own tee program -- or use Tom Christiansen's, at
-http://www.perl.com/CPAN/authors/id/TOMC/scripts/tct.gz, which is
-written in Perl.
+Or even:
+
+ # make STDOUT go to three files, plus original STDOUT
+ open (STDOUT, "| tee file1 file2 file3") or die "Teeing off: $!\n";
+ print "whatever\n" or die "Writing: $!\n";
+ close(STDOUT) or die "Closing: $!\n";
+
+Otherwise you'll have to write your own multiplexing print
+function--or your own tee program--or use Tom Christiansen's,
+at http://www.perl.com/CPAN/authors/id/TOMC/scripts/tct.gz , which is
+written in Perl and offers much greater functionality
+than the stock version.
+
+=head2 How can I read in an entire file all at once?
+
+The customary Perl approach for processing all the lines in a file is to
+do so one line at a time:
+
+ open (INPUT, $file) || die "can't open $file: $!";
+ while (<INPUT>) {
+ chomp;
+ # do something with $_
+ }
+ close(INPUT) || die "can't close $file: $!";
+
+This is tremendously more efficient than reading the entire file into
+memory as an array of lines and then processing it one element at a time,
+which is often--if not almost always--the wrong approach. Whenever
+you see someone do this:
+
+ @lines = <INPUT>;
+
+you should think long and hard about why you need everything loaded
+at once. It's just not a scalable solution. You might also find it
+more fun to use the standard DB_File module's $DB_RECNO bindings,
+which allow you to tie an array to a file so that accessing an element
+the array actually accesses the corresponding line in the file.
+
+On very rare occasion, you may have an algorithm that demands that
+the entire file be in memory at once as one scalar. The simplest solution
+to that is
+
+ $var = `cat $file`;
+
+Being in scalar context, you get the whole thing. In list context,
+you'd get a list of all the lines:
+
+ @lines = `cat $file`;
+
+This tiny but expedient solution is neat, clean, and portable to
+all systems on which decent tools have been installed. For those
+who prefer not to use the toolbox, you can of course read the file
+manually, although this makes for more complicated code.
-In theory a IO::Tee class could be written, but to date we haven't
-seen such.
+ {
+ local(*INPUT, $/);
+ open (INPUT, $file) || die "can't open $file: $!";
+ $var = <INPUT>;
+ }
+
+That temporarily undefs your record separator, and will automatically
+close the file at block exit. If the file is already open, just use this:
+
+ $var = do { local $/; <INPUT> };
=head2 How can I read in a file by paragraphs?
-Use the C<$\> variable (see L<perlvar> for details). You can either
+Use the C<$/> variable (see L<perlvar> for details). You can either
set it to C<""> to eliminate empty paragraphs (C<"abc\n\n\n\ndef">,
for instance, gets treated as two paragraphs and not three), or
C<"\n\n"> to accept empty paragraphs.
+Note that a blank line must have no blanks in it. Thus C<"fred\n
+\nstuff\n\n"> is one paragraph, but C<"fred\n\nstuff\n\n"> is two.
+
=head2 How can I read a single character from a file? From the keyboard?
You can use the builtin C<getc()> function for most filehandles, but
it won't (easily) work on a terminal device. For STDIN, either use
-the Term::ReadKey module from CPAN, or use the sample code in
+the Term::ReadKey module from CPAN or use the sample code in
L<perlfunc/getc>.
-If your system supports POSIX, you can use the following code, which
-you'll note turns off echo processing as well.
+If your system supports the portable operating system programming
+interface (POSIX), you can use the following code, which you'll note
+turns off echo processing as well.
#!/usr/bin/perl -w
use strict;
END { cooked() }
-The Term::ReadKey module from CPAN may be easier to use:
+The Term::ReadKey module from CPAN may be easier to use. Recent versions
+include also support for non-portable systems as well.
use Term::ReadKey;
open(TTY, "</dev/tty");
printf "\nYou said %s, char number %03d\n",
$key, ord $key;
-For DOS systems, Dan Carson <dbc@tc.fluke.COM> reports the following:
-
-To put the PC in "raw" mode, use ioctl with some magic numbers gleaned
-from msdos.c (Perl source file) and Ralf Brown's interrupt list (comes
-across the net every so often):
-
- $old_ioctl = ioctl(STDIN,0,0); # Gets device info
- $old_ioctl &= 0xff;
- ioctl(STDIN,1,$old_ioctl | 32); # Writes it back, setting bit 5
-
-Then to read a single character:
-
- sysread(STDIN,$c,1); # Read a single character
-
-And to put the PC back to "cooked" mode:
-
- ioctl(STDIN,1,$old_ioctl); # Sets it back to cooked mode.
+=head2 How can I tell whether there's a character waiting on a filehandle?
-So now you have $c. If C<ord($c) == 0>, you have a two byte code, which
-means you hit a special key. Read another byte with C<sysread(STDIN,$c,1)>,
-and that value tells you what combination it was according to this
-table:
+The very first thing you should do is look into getting the Term::ReadKey
+extension from CPAN. As we mentioned earlier, it now even has limited
+support for non-portable (read: not open systems, closed, proprietary,
+not POSIX, not Unix, etc) systems.
- # PC 2-byte keycodes = ^@ + the following:
-
- # HEX KEYS
- # --- ----
- # 0F SHF TAB
- # 10-19 ALT QWERTYUIOP
- # 1E-26 ALT ASDFGHJKL
- # 2C-32 ALT ZXCVBNM
- # 3B-44 F1-F10
- # 47-49 HOME,UP,PgUp
- # 4B LEFT
- # 4D RIGHT
- # 4F-53 END,DOWN,PgDn,Ins,Del
- # 54-5D SHF F1-F10
- # 5E-67 CTR F1-F10
- # 68-71 ALT F1-F10
- # 73-77 CTR LEFT,RIGHT,END,PgDn,HOME
- # 78-83 ALT 1234567890-=
- # 84 CTR PgUp
-
-This is all trial and error I did a long time ago, I hope I'm reading the
-file that worked.
-
-=head2 How can I tell if there's a character waiting on a filehandle?
-
-You should check out the Frequently Asked Questions list in
+You should also check out the Frequently Asked Questions list in
comp.unix.* for things like this: the answer is essentially the same.
It's very system dependent. Here's one solution that works on BSD
systems:
return $nfd = select($rin,undef,undef,0);
}
-You should look into getting the Term::ReadKey extension from CPAN.
+If you want to find out how many characters are waiting, there's
+also the FIONREAD ioctl call to be looked at. The I<h2ph> tool that
+comes with Perl tries to convert C include files to Perl code, which
+can be C<require>d. FIONREAD ends up defined as a function in the
+I<sys/ioctl.ph> file:
-=head2 How do I open a file without blocking?
+ require 'sys/ioctl.ph';
-You need to use the O_NDELAY or O_NONBLOCK flag from the Fcntl module
-in conjunction with sysopen():
+ $size = pack("L", 0);
+ ioctl(FH, FIONREAD(), $size) or die "Couldn't call ioctl: $!\n";
+ $size = unpack("L", $size);
- use Fcntl;
- sysopen(FH, "/tmp/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644)
- or die "can't open /tmp/somefile: $!":
+If I<h2ph> wasn't installed or doesn't work for you, you can
+I<grep> the include files by hand:
-=head2 How do I create a file only if it doesn't exist?
+ % grep FIONREAD /usr/include/*/*
+ /usr/include/asm/ioctls.h:#define FIONREAD 0x541B
-You need to use the O_CREAT and O_EXCL flags from the Fcntl module in
-conjunction with sysopen():
+Or write a small C program using the editor of champions:
- use Fcntl;
- sysopen(FH, "/tmp/somefile", O_WRONLY|O_EXCL|O_CREAT, 0644)
- or die "can't open /tmp/somefile: $!":
+ % cat > fionread.c
+ #include <sys/ioctl.h>
+ main() {
+ printf("%#08x\n", FIONREAD);
+ }
+ ^D
+ % cc -o fionread fionread.c
+ % ./fionread
+ 0x4004667f
-Be warned that neither creation nor deletion of files is guaranteed to
-be an atomic operation over NFS. That is, two processes might both
-successful create or unlink the same file!
+And then hard-code it, leaving porting as an exercise to your successor.
+
+ $FIONREAD = 0x4004667f; # XXX: opsys dependent
+
+ $size = pack("L", 0);
+ ioctl(FH, $FIONREAD, $size) or die "Couldn't call ioctl: $!\n";
+ $size = unpack("L", $size);
+
+FIONREAD requires a filehandle connected to a stream, meaning that sockets,
+pipes, and tty devices work, but I<not> files.
=head2 How do I do a C<tail -f> in perl?
filehandle. The method: read until end of file, clearerr(), read some
more. Lather, rinse, repeat.
+There's also a File::Tail module from CPAN.
+
=head2 How do I dup() a filehandle in Perl?
If you check L<perlfunc/open>, you'll see that several of the ways
$fd = $ENV{MHCONTEXTFD};
open(MHCONTEXT, "<&=$fd"); # like fdopen(3S)
-Error checking has been left as an exercise for the reader.
+Note that "<&STDIN" makes a copy, but "<&=STDIN" make
+an alias. That means if you close an aliased handle, all
+aliases become inaccessible. This is not true with
+a copied one.
+
+Error checking, as always, has been left as an exercise for the reader.
=head2 How do I close a file descriptor by number?
This should rarely be necessary, as the Perl close() function is to be
used for things that Perl opened itself, even if it was a dup of a
-numeric descriptor, as with MHCONTEXT above. But if you really have
+numeric descriptor as with MHCONTEXT above. But if you really have
to, you may be able to do this:
require 'sys/syscall.ph';
$rc = syscall(&SYS_close, $fd + 0); # must force numeric
die "can't sysclose $fd: $!" unless $rc == -1;
+Or, just use the fdopen(3S) feature of open():
+
+ {
+ local *F;
+ open F, "<&=$fd" or die "Cannot reopen fd=$fd: $!";
+ close F;
+ }
+
=head2 Why can't I use "C:\temp\foo" in DOS paths? What doesn't `C:\temp\foo.exe` work?
Whoops! You just put a tab and a formfeed into that filename!
backslash is an escape character. The full list of these is in
L<perlop/Quote and Quote-like Operators>. Unsurprisingly, you don't
have a file called "c:(tab)emp(formfeed)oo" or
-"c:(tab)emp(formfeed)oo.exe" on your DOS filesystem.
+"c:(tab)emp(formfeed)oo.exe" on your legacy DOS filesystem.
Either single-quote your strings, or (preferably) use forward slashes.
Since all DOS and Windows versions since something like MS-DOS 2.0 or so
have treated C</> and C<\> the same in a path, you might as well use the
-one that doesn't clash with Perl -- or the POSIX shell, ANSI C and C++,
-awk, Tcl, Java, or Python, just to mention a few.
+one that doesn't clash with Perl--or the POSIX shell, ANSI C and C++,
+awk, Tcl, Java, or Python, just to mention a few. POSIX paths
+are more portable, too.
=head2 Why doesn't glob("*.*") get all the files?
Because even on non-Unix ports, Perl's glob function follows standard
Unix globbing semantics. You'll need C<glob("*")> to get all (non-hidden)
-files.
+files. This makes glob() portable even to legacy systems. Your
+port may include proprietary globbing functions as well. Check its
+documentation for details.
=head2 Why does Perl let me delete read-only files? Why does C<-i> clobber protected files? Isn't this a bug in Perl?
This is elaborately and painstakingly described in the "Far More Than
-You Every Wanted To Know" in
+You Ever Wanted To Know" in
http://www.perl.com/CPAN/doc/FMTEYEWTK/file-dir-perms .
The executive summary: learn how your filesystem works. The
rand($.) < 1 && ($line = $_) while <>;
This has a significant advantage in space over reading the whole
-file in.
+file in. A simple proof by induction is available upon
+request if you doubt the algorithm's correctness.
+
+=head2 Why do I get weird spaces when I print an array of lines?
+
+Saying
+
+ print "@lines\n";
+
+joins together the elements of C<@lines> with a space between them.
+If C<@lines> were C<("little", "fluffy", "clouds")> then the above
+statement would print
+
+ little fluffy clouds
+
+but if each element of C<@lines> was a line of text, ending a newline
+character C<("little\n", "fluffy\n", "clouds\n")> then it would print:
+
+ little
+ fluffy
+ clouds
+
+If your array contains lines, just print them:
+
+ print @lines;
=head1 AUTHOR AND COPYRIGHT
-Copyright (c) 1997 Tom Christiansen and Nathan Torkington.
-All rights reserved. See L<perlfaq> for distribution information.
+Copyright (c) 1997-1999 Tom Christiansen and Nathan Torkington.
+All rights reserved.
+
+When included as an integrated part of the Standard Distribution
+of Perl or of its documentation (printed or otherwise), this works is
+covered under Perl's Artistic License. For separate distributions of
+all or part of this FAQ outside of that, see L<perlfaq>.
+Irrespective of its distribution, all code examples here are in the public
+domain. You are permitted and encouraged to use this code and any
+derivatives thereof in your own programs for fun or for profit as you
+see fit. A simple comment in the code giving credit to the FAQ would
+be courteous but is not required.