=head1 NAME
-perlfaq5 - Files and Formats ($Revision: 1.38 $, $Date: 1999/05/23 16:08:30 $)
+perlfaq5 - Files and Formats ($Revision: 1.12 $, $Date: 2002/03/11 22:25:25 $)
=head1 DESCRIPTION
$document = join('', <$sock>);
print "DOC IS: $document\n";
-Note the bizarrely hardcoded carriage return and newline in their octal
+Note the bizarrely hard coded carriage return and newline in their octal
equivalents. This is the ONLY way (currently) to assure a proper flush
on all platforms, including Macintosh. That's the way things work in
network programming: you really should specify the exact bit pattern
=head2 How do I change one line in a file/delete a line in a file/insert a line in the middle of a file/append to the beginning of a file?
-Those are operations of a text editor. Perl is not a text editor.
-Perl is a programming language. You have to decompose the problem into
-low-level calls to read, write, open, close, and seek.
-
-Although humans have an easy time thinking of a text file as being a
-sequence of lines that operates much like a stack of playing cards--or
-punch cards--computers usually see the text file as a sequence of bytes.
-In general, there's no direct way for Perl to seek to a particular line
-of a file, insert text into a file, or remove text from a file.
-
-(There are exceptions in special circumstances. You can add or remove
-data at the very end of the file. A sequence of bytes can be replaced
-with another sequence of the same length. The C<$DB_RECNO> array
-bindings as documented in L<DB_File> also provide a direct way of
-modifying a file. Files where all lines are the same length are also
-easy to alter.)
-
-The general solution is to create a temporary copy of the text file with
-the changes you want, then copy that over the original. This assumes
-no locking.
-
- $old = $file;
- $new = "$file.tmp.$$";
- $bak = "$file.orig";
-
- open(OLD, "< $old") or die "can't open $old: $!";
- open(NEW, "> $new") or die "can't open $new: $!";
-
- # Correct typos, preserving case
- while (<OLD>) {
- s/\b(p)earl\b/${1}erl/i;
- (print NEW $_) or die "can't write to $new: $!";
- }
-
- close(OLD) or die "can't close $old: $!";
- close(NEW) or die "can't close $new: $!";
-
- rename($old, $bak) or die "can't rename $old to $bak: $!";
- rename($new, $old) or die "can't rename $new to $old: $!";
-
-Perl can do this sort of thing for you automatically with the C<-i>
-command-line switch or the closely-related C<$^I> variable (see
-L<perlrun> for more details). Note that
-C<-i> may require a suffix on some non-Unix systems; see the
-platform-specific documentation that came with your port.
-
- # Renumber a series of tests from the command line
- perl -pi -e 's/(^\s+test\s+)\d+/ $1 . ++$count /e' t/op/taint.t
-
- # form a script
- local($^I, @ARGV) = ('.orig', glob("*.c"));
- while (<>) {
- if ($. == 1) {
- print "This line should appear at the top of each file\n";
- }
- s/\b(p)earl\b/${1}erl/i; # Correct typos, preserving case
- print;
- close ARGV if eof; # Reset $.
- }
-
-If you need to seek to an arbitrary line of a file that changes
-infrequently, you could build up an index of byte positions of where
-the line ends are in the file. If the file is large, an index of
-every tenth or hundredth line end would allow you to seek and read
-fairly efficiently. If the file is sorted, try the look.pl library
-(part of the standard perl distribution).
-
-In the unique case of deleting lines at the end of a file, you
-can use tell() and truncate(). The following code snippet deletes
-the last line of a file without making a copy or reading the
-whole file into memory:
-
- open (FH, "+< $file");
- while ( <FH> ) { $addr = tell(FH) unless eof(FH) }
- truncate(FH, $addr);
-
-Error checking is left as an exercise for the reader.
+Use the Tie::File module, which is included in the standard
+distribution since Perl 5.8.0.
=head2 How do I count the number of lines in a file?
=head2 How do I make a temporary file name?
-Use the C<new_tmpfile> class method from the IO::File module to get a
-filehandle opened for reading and writing. Use it if you don't
-need to know the file's name:
-
- use IO::File;
- $fh = IO::File->new_tmpfile()
- or die "Unable to make new temporary file: $!";
+Use the File::Temp module, see L<File::Temp> for more information.
-If you do need to know the file's name, you can use the C<tmpnam>
-function from the POSIX module to get a filename that you then open
-yourself:
+ use File::Temp qw/ tempfile tempdir /;
+ $dir = tempdir( CLEANUP => 1 );
+ ($fh, $filename) = tempfile( DIR => $dir );
- use Fcntl;
- use POSIX qw(tmpnam);
+ # or if you don't need to know the filename
- # try new temporary filenames until we get one that didn't already
- # exist; the check should be unnecessary, but you can't be too careful
- do { $name = tmpnam() }
- until sysopen(FH, $name, O_RDWR|O_CREAT|O_EXCL);
+ $fh = tempfile( DIR => $dir );
- # install atexit-style handler so that when we exit or die,
- # we automatically delete this temporary file
- END { unlink($name) or die "Couldn't unlink $name : $!" }
+The File::Temp has been a standard module since Perl 5.6.1. If you
+don't have a modern enough Perl installed, use the C<new_tmpfile>
+class method from the IO::File module to get a filehandle opened for
+reading and writing. Use it if you don't need to know the file's name:
- # now go on to use the file ...
+ use IO::File;
+ $fh = IO::File->new_tmpfile()
+ or die "Unable to make new temporary file: $!";
If you're committed to creating a temporary file by hand, use the
process ID and/or the current time-value. If you need to have many
BEGIN {
use Fcntl;
- my $temp_dir = -d '/tmp' ? '/tmp' : $ENV{TMP} || $ENV{TEMP};
+ my $temp_dir = -d '/tmp' ? '/tmp' : $ENV{TMPDIR} || $ENV{TEMP};
my $base_name = sprintf("%s/%d-%d-0000", $temp_dir, $$, time());
sub temp_file {
local *FH;
We've used C<$$var> in a way that forbidden by C<use strict 'refs'>.
That is, we've promoted a string to a scalar variable reference using
-symbolic references. This is ok in small programs, but doesn't scale
+symbolic references. This is okay in small programs, but doesn't scale
well. It also only works on global variables, not lexicals.
=head2 How can I make a filehandle local to a subroutine? How do I pass filehandles between subroutines? How do I make an array of filehandles?
before using it. That is because only simple scalar variables, not
expressions or subscripts of hashes or arrays, can be used with
built-ins like C<print>, C<printf>, or the diamond operator. Using
-something other than a simple scalar varaible as a filehandle is
+something other than a simple scalar variable as a filehandle is
illegal and won't even compile:
@fd = (*STDIN, *STDOUT, *STDERR);
=head2 How can I output my numbers with commas added?
-This one will do it for you:
-
- sub commify {
- local $_ = shift;
- 1 while s/^([-+]?\d+)(\d{3})/$1,$2/;
- return $_;
- }
+This one from Benjamin Goldberg will do it for you:
- $n = 23659019423.2331;
- print "GOT: ", commify($n), "\n";
+ s/(^[-+]?\d+?(?=(?>(?:\d{3})+)(?!\d))|\G\d{3}(?=\d))/$1,/g;
- GOT: 23,659,019,423.2331
+or written verbosely:
-You can't just:
-
- s/^([-+]?\d+)(\d{3})/$1,$2/g;
-
-because you have to put the comma in and then recalculate your
-position.
-
-Alternatively, this code commifies all numbers in a line regardless of
-whether they have decimal portions, are preceded by + or -, or
-whatever:
-
- # from Andrew Johnson <ajohnson@gpu.srv.ualberta.ca>
- sub commify {
- my $input = shift;
- $input = reverse $input;
- $input =~ s<(\d\d\d)(?=\d)(?!\d*\.)><$1,>g;
- return scalar reverse $input;
- }
+ s/(
+ ^[-+]? # beginning of number.
+ \d{1,3}? # first digits before first comma
+ (?= # followed by, (but not included in the match) :
+ (?>(?:\d{3})+) # some positive multiple of three digits.
+ (?!\d) # an *exact* multiple, not x * 3 + 1 or whatever.
+ )
+ | # or:
+ \G\d{3} # after the last group, get three digits
+ (?=\d) # but they have to have more digits after them.
+ )/$1,/xg;
=head2 How can I translate tildes (~) in a filename?
-Use the <> (glob()) operator, documented in L<perlfunc>. This
-requires that you have a shell installed that groks tildes, meaning
-csh or tcsh or (some versions of) ksh, and thus your code may have portability
-problems. The Glob::KGlob module (available from CPAN) gives more
-portable glob functionality.
+Use the <> (glob()) operator, documented in L<perlfunc>. Older
+versions of Perl require that you have a shell installed that groks
+tildes. Recent perl versions have this feature built in. The
+File::KGlob module (available from CPAN) gives more portable glob
+functionality.
Within Perl, you may use this directly:
have this problem, but their users may be surprised by it.
To get around this, either upgrade to Perl v5.6.0 or later, do the glob
-yourself with readdir() and patterns, or use a module like Glob::KGlob,
+yourself with readdir() and patterns, or use a module like File::KGlob,
one that doesn't use the shell to do globbing.
=head2 Is there a leak/bug in glob()?
Normally perl ignores trailing blanks in filenames, and interprets
certain leading characters (or a trailing "|") to mean something
-special. To avoid this, you might want to use a routine like the one below.
-It turns incomplete pathnames into explicit relative ones, and tacks a
-trailing null byte on the name to make perl leave it alone:
-
- sub safe_filename {
- local $_ = shift;
- s#^([^./])#./$1#;
- $_ .= "\0";
- return $_;
- }
+special.
- $badpath = "<<<something really wicked ";
- $fn = safe_filename($badpath");
- open(FH, "> $fn") or "couldn't open $badpath: $!";
+The three argument form of open() lets you specify the mode
+separately from the filename. The open() function treats
+special mode characters and whitespace in the filename as
+literals
-This assumes that you are using POSIX (portable operating systems
-interface) paths. If you are on a closed, non-portable, proprietary
-system, you may have to adjust the C<"./"> above.
+ open FILE, "<", " file "; # filename is " file "
+ open FILE, ">", ">file"; # filename is ">file"
-It would be a lot clearer to use sysopen(), though:
+It may be a lot clearer to use sysopen(), though:
use Fcntl;
$badpath = "<<<something really wicked ";
sysopen (FH, $badpath, O_WRONLY | O_CREAT | O_TRUNC)
or die "can't open $badpath: $!";
-For more information, see also the new L<perlopentut> if you have it
-(new for 5.6).
-
=head2 How can I reliably rename a file?
-Well, usually you just use Perl's rename() function. That may not
-work everywhere, though, particularly when renaming files across file systems.
-Some sub-Unix systems have broken ports that corrupt the semantics of
-rename()--for example, WinNT does this right, but Win95 and Win98
-are broken. (The last two parts are not surprising, but the first is. :-)
-
-If your operating system supports a proper mv(1) program or its moral
+If your operating system supports a proper mv(1) utility or its functional
equivalent, this works:
rename($old, $new) or system("mv", $old, $new);
-It may be more compelling to use the File::Copy module instead. You
-just copy to the new file to the new name (checking return values),
-then delete the old one. This isn't really the same semantically as a
-real rename(), though, which preserves metainformation like
+It may be more portable to use the File::Copy module instead.
+You just copy to the new file to the new name (checking return
+values), then delete the old one. This isn't really the same
+semantically as a rename(), which preserves meta-information like
permissions, timestamps, inode info, etc.
-Newer versions of File::Copy exports a move() function.
+Newer versions of File::Copy export a move() function.
=head2 How can I lock a file?
If the count doesn't impress your friends, then the code might. :-)
+=head2 All I want to do is append a small amount of text to the end of a file. Do I still have to use locking?
+
+If you are on a system that correctly implements flock() and you use the
+example appending code from "perldoc -f flock" everything will be OK
+even if the OS you are on doesn't implement append mode correctly (if
+such a system exists.) So if you are happy to restrict yourself to OSs
+that implement flock() (and that's not really much of a restriction)
+then that is what you should do.
+
+If you know you are only going to use a system that does correctly
+implement appending (i.e. not Win32) then you can omit the seek() from
+the above code.
+
+If you know you are only writing code to run on an OS and filesystem that
+does implement append mode correctly (a local filesystem on a modern
+Unix for example), and you keep the file in block-buffered mode and you
+write less than one buffer-full of output between each manual flushing
+of the buffer then each bufferload is almost guaranteed to be written to
+the end of the file in one chunk without getting intermingled with
+anyone else's output. You can also use the syswrite() function which is
+simply a wrapper around your systems write(2) system call.
+
+There is still a small theoretical chance that a signal will interrupt
+the system level write() operation before completion. There is also a
+possibility that some STDIO implementations may call multiple system
+level write()s even if the buffer was empty to start. There may be some
+systems where this probability is reduced to zero.
+
=head2 How do I randomly update a binary file?
If you're just trying to patch a binary, in many cases something as
=head2 How do I get a file's timestamp in perl?
-If you want to retrieve the time at which the file was last read,
-written, or had its meta-data (owner, etc) changed, you use the B<-M>,
-B<-A>, or B<-C> filetest operations as documented in L<perlfunc>. These
-retrieve the age of the file (measured against the start-time of your
-program) in days as a floating point number. To retrieve the "raw"
-time in seconds since the epoch, you would call the stat function,
-then use localtime(), gmtime(), or POSIX::strftime() to convert this
-into human-readable form.
+If you want to retrieve the time at which the file was last
+read, written, or had its meta-data (owner, etc) changed,
+you use the B<-M>, B<-A>, or B<-C> file test operations as
+documented in L<perlfunc>. These retrieve the age of the
+file (measured against the start-time of your program) in
+days as a floating point number. Some platforms may not have
+all of these times. See L<perlport> for details. To
+retrieve the "raw" time in seconds since the epoch, you
+would call the stat function, then use localtime(),
+gmtime(), or POSIX::strftime() to convert this into
+human-readable form.
Here's an example:
Otherwise you'll have to write your own multiplexing print
function--or your own tee program--or use Tom Christiansen's,
-at http://www.perl.com/CPAN/authors/id/TOMC/scripts/tct.gz , which is
+at http://www.cpan.org/authors/id/TOMC/scripts/tct.gz , which is
written in Perl and offers much greater functionality
than the stock version.
for instance, gets treated as two paragraphs and not three), or
C<"\n\n"> to accept empty paragraphs.
-Note that a blank line must have no blanks in it. Thus C<"fred\n
-\nstuff\n\n"> is one paragraph, but C<"fred\n\nstuff\n\n"> is two.
+Note that a blank line must have no blanks in it. Thus
+S<C<"fred\n \nstuff\n\n">> is one paragraph, but C<"fred\n\nstuff\n\n"> is two.
=head2 How can I read a single character from a file? From the keyboard?
printf "\nYou said %s, char number %03d\n",
$key, ord $key;
-For legacy DOS systems, Dan Carson <dbc@tc.fluke.COM> reports the following:
-
-To put the PC in "raw" mode, use ioctl with some magic numbers gleaned
-from msdos.c (Perl source file) and Ralf Brown's interrupt list (comes
-across the net every so often):
-
- $old_ioctl = ioctl(STDIN,0,0); # Gets device info
- $old_ioctl &= 0xff;
- ioctl(STDIN,1,$old_ioctl | 32); # Writes it back, setting bit 5
-
-Then to read a single character:
-
- sysread(STDIN,$c,1); # Read a single character
-
-And to put the PC back to "cooked" mode:
-
- ioctl(STDIN,1,$old_ioctl); # Sets it back to cooked mode.
-
-So now you have $c. If C<ord($c) == 0>, you have a two byte code, which
-means you hit a special key. Read another byte with C<sysread(STDIN,$c,1)>,
-and that value tells you what combination it was according to this
-table:
-
- # PC 2-byte keycodes = ^@ + the following:
-
- # HEX KEYS
- # --- ----
- # 0F SHF TAB
- # 10-19 ALT QWERTYUIOP
- # 1E-26 ALT ASDFGHJKL
- # 2C-32 ALT ZXCVBNM
- # 3B-44 F1-F10
- # 47-49 HOME,UP,PgUp
- # 4B LEFT
- # 4D RIGHT
- # 4F-53 END,DOWN,PgDn,Ins,Del
- # 54-5D SHF F1-F10
- # 5E-67 CTR F1-F10
- # 68-71 ALT F1-F10
- # 73-77 CTR LEFT,RIGHT,END,PgDn,HOME
- # 78-83 ALT 1234567890-=
- # 84 CTR PgUp
-
-This is all trial and error I did a long time ago; I hope I'm reading the
-file that worked...
-
=head2 How can I tell whether there's a character waiting on a filehandle?
The very first thing you should do is look into getting the Term::ReadKey
% ./fionread
0x4004667f
-And then hard-code it, leaving porting as an exercise to your successor.
+And then hard code it, leaving porting as an exercise to your successor.
$FIONREAD = 0x4004667f; # XXX: opsys dependent
close F;
}
-=head2 Why can't I use "C:\temp\foo" in DOS paths? What doesn't `C:\temp\foo.exe` work?
+=head2 Why can't I use "C:\temp\foo" in DOS paths? Why doesn't `C:\temp\foo.exe` work?
Whoops! You just put a tab and a formfeed into that filename!
Remember that within double quoted strings ("like\this"), the
=head2 Why does Perl let me delete read-only files? Why does C<-i> clobber protected files? Isn't this a bug in Perl?
-This is elaborately and painstakingly described in the "Far More Than
-You Ever Wanted To Know" in
-http://www.perl.com/CPAN/doc/FMTEYEWTK/file-dir-perms .
+This is elaborately and painstakingly described in the
+F<file-dir-perms> article in the "Far More Than You Ever Wanted To
+Know" collection in http://www.cpan.org/olddoc/FMTEYEWTK.tgz .
The executive summary: learn how your filesystem works. The
permissions on a file say what can happen to the data in that file.
=head1 AUTHOR AND COPYRIGHT
-Copyright (c) 1997-1999 Tom Christiansen and Nathan Torkington.
+Copyright (c) 1997-2002 Tom Christiansen and Nathan Torkington.
All rights reserved.
-When included as an integrated part of the Standard Distribution
-of Perl or of its documentation (printed or otherwise), this works is
-covered under Perl's Artistic License. For separate distributions of
-all or part of this FAQ outside of that, see L<perlfaq>.
+This documentation is free; you can redistribute it and/or modify it
+under the same terms as Perl itself.
Irrespective of its distribution, all code examples here are in the public
domain. You are permitted and encouraged to use this code and any