=head1 NAME
-perlfaq5 - Files and Formats ($Revision: 1.9 $, $Date: 2002/02/11 19:30:21 $)
+perlfaq5 - Files and Formats ($Revision: 1.30 $, $Date: 2003/11/23 08:07:46 $)
=head1 DESCRIPTION
=head2 How do I flush/unbuffer an output filehandle? Why must I do this?
-The C standard I/O library (stdio) normally buffers characters sent to
-devices. This is done for efficiency reasons so that there isn't a
-system call for each byte. Any time you use print() or write() in
-Perl, you go though this buffering. syswrite() circumvents stdio and
-buffering.
-
-In most stdio implementations, the type of output buffering and the size of
-the buffer varies according to the type of device. Disk files are block
-buffered, often with a buffer size of more than 2k. Pipes and sockets
-are often buffered with a buffer size between 1/2 and 2k. Serial devices
-(e.g. modems, terminals) are normally line-buffered, and stdio sends
-the entire line when it gets the newline.
-
-Perl does not support truly unbuffered output (except insofar as you can
-C<syswrite(OUT, $char, 1)>). What it does instead support is "command
-buffering", in which a physical write is performed after every output
-command. This isn't as hard on your system as unbuffering, but does
-get the output where you want it when you want it.
-
-If you expect characters to get to your device when you print them there,
-you'll want to autoflush its handle.
-Use select() and the C<$|> variable to control autoflushing
-(see L<perlvar/$|> and L<perlfunc/select>):
+Perl does not support truly unbuffered output (except
+insofar as you can C<syswrite(OUT, $char, 1)>), although it
+does support is "command buffering", in which a physical
+write is performed after every output command.
+
+The C standard I/O library (stdio) normally buffers
+characters sent to devices so that there isn't a system call
+for each byte. In most stdio implementations, the type of
+output buffering and the size of the buffer varies according
+to the type of device. Perl's print() and write() functions
+normally buffer output, while syswrite() bypasses buffering
+all together.
+
+If you want your output to be sent immediately when you
+execute print() or write() (for instance, for some network
+protocols), you must set the handle's autoflush flag. This
+flag is the Perl variable $| and when it is set to a true
+value, Perl will flush the handle's buffer after each
+print() or write(). Setting $| affects buffering only for
+the currently selected default file handle. You choose this
+handle with the one argument select() call (see
+L<perlvar/$E<verbar>> and L<perlfunc/select>).
+
+Use select() to choose the desired handle, then set its
+per-filehandle variables.
$old_fh = select(OUTPUT_HANDLE);
$| = 1;
select($old_fh);
-Or using the traditional idiom:
+Some idioms can handle this in a single statement:
select((select(OUTPUT_HANDLE), $| = 1)[0]);
-Or if don't mind slowly loading several thousand lines of module code
-just because you're afraid of the C<$|> variable:
+ $| = 1, select $_ for select OUTPUT_HANDLE;
- use FileHandle;
- open(DEV, "+</dev/tty"); # ceci n'est pas une pipe
- DEV->autoflush(1);
-
-or the newer IO::* modules:
+Some modules offer object-oriented access to handles and their
+variables, although they may be overkill if this is the only
+thing you do with them. You can use IO::Handle:
use IO::Handle;
open(DEV, ">/dev/printer"); # but is this?
DEV->autoflush(1);
-or even this:
+or IO::Socket:
use IO::Socket; # this one is kinda a pipe?
- $sock = IO::Socket::INET->new(PeerAddr => 'www.perl.com',
- PeerPort => 'http(80)',
- Proto => 'tcp');
- die "$!" unless $sock;
+ my $sock = IO::Socket::INET->new( 'www.example.com:80' ) ;
$sock->autoflush();
- print $sock "GET / HTTP/1.0" . "\015\012" x 2;
- $document = join('', <$sock>);
- print "DOC IS: $document\n";
-
-Note the bizarrely hard coded carriage return and newline in their octal
-equivalents. This is the ONLY way (currently) to assure a proper flush
-on all platforms, including Macintosh. That's the way things work in
-network programming: you really should specify the exact bit pattern
-on the network line terminator. In practice, C<"\n\n"> often works,
-but this is not portable.
-
-See L<perlfaq9> for other examples of fetching URLs over the web.
=head2 How do I change one line in a file/delete a line in a file/insert a line in the middle of a file/append to the beginning of a file?
-Those are operations of a text editor. Perl is not a text editor.
-Perl is a programming language. You have to decompose the problem into
-low-level calls to read, write, open, close, and seek.
-
-Although humans have an easy time thinking of a text file as being a
-sequence of lines that operates much like a stack of playing cards--or
-punch cards--computers usually see the text file as a sequence of bytes.
-In general, there's no direct way for Perl to seek to a particular line
-of a file, insert text into a file, or remove text from a file.
-
-(There are exceptions in special circumstances. You can add or remove
-data at the very end of the file. A sequence of bytes can be replaced
-with another sequence of the same length. The C<$DB_RECNO> array
-bindings as documented in L<DB_File> also provide a direct way of
-modifying a file. Files where all lines are the same length are also
-easy to alter.)
-
-The general solution is to create a temporary copy of the text file with
-the changes you want, then copy that over the original. This assumes
-no locking.
-
- $old = $file;
- $new = "$file.tmp.$$";
- $bak = "$file.orig";
-
- open(OLD, "< $old") or die "can't open $old: $!";
- open(NEW, "> $new") or die "can't open $new: $!";
-
- # Correct typos, preserving case
- while (<OLD>) {
- s/\b(p)earl\b/${1}erl/i;
- (print NEW $_) or die "can't write to $new: $!";
- }
-
- close(OLD) or die "can't close $old: $!";
- close(NEW) or die "can't close $new: $!";
-
- rename($old, $bak) or die "can't rename $old to $bak: $!";
- rename($new, $old) or die "can't rename $new to $old: $!";
-
-Perl can do this sort of thing for you automatically with the C<-i>
-command-line switch or the closely-related C<$^I> variable (see
-L<perlrun> for more details). Note that
-C<-i> may require a suffix on some non-Unix systems; see the
-platform-specific documentation that came with your port.
-
- # Renumber a series of tests from the command line
- perl -pi -e 's/(^\s+test\s+)\d+/ $1 . ++$count /e' t/op/taint.t
-
- # form a script
- local($^I, @ARGV) = ('.orig', glob("*.c"));
- while (<>) {
- if ($. == 1) {
- print "This line should appear at the top of each file\n";
- }
- s/\b(p)earl\b/${1}erl/i; # Correct typos, preserving case
- print;
- close ARGV if eof; # Reset $.
- }
-
-If you need to seek to an arbitrary line of a file that changes
-infrequently, you could build up an index of byte positions of where
-the line ends are in the file. If the file is large, an index of
-every tenth or hundredth line end would allow you to seek and read
-fairly efficiently. If the file is sorted, try the look.pl library
-(part of the standard perl distribution).
-
-In the unique case of deleting lines at the end of a file, you
-can use tell() and truncate(). The following code snippet deletes
-the last line of a file without making a copy or reading the
-whole file into memory:
-
- open (FH, "+< $file");
- while ( <FH> ) { $addr = tell(FH) unless eof(FH) }
- truncate(FH, $addr);
-
-Error checking is left as an exercise for the reader.
+Use the Tie::File module, which is included in the standard
+distribution since Perl 5.8.0.
=head2 How do I count the number of lines in a file?
This assumes no funny games with newline translations.
+=head2 How can I use Perl's C<-i> option from within a program?
+
+C<-i> sets the value of Perl's C<$^I> variable, which in turn affects
+the behavior of C<< <> >>; see L<perlrun> for more details. By
+modifying the appropriate variables directly, you can get the same
+behavior within a larger program. For example:
+
+ # ...
+ {
+ local($^I, @ARGV) = ('.orig', glob("*.c"));
+ while (<>) {
+ if ($. == 1) {
+ print "This line should appear at the top of each file\n";
+ }
+ s/\b(p)earl\b/${1}erl/i; # Correct typos, preserving case
+ print;
+ close ARGV if eof; # Reset $.
+ }
+ }
+ # $^I and @ARGV return to their old values here
+
+This block modifies all the C<.c> files in the current directory,
+leaving a backup of the original data from each file in a new
+C<.c.orig> file.
+
=head2 How do I make a temporary file name?
Use the File::Temp module, see L<File::Temp> for more information.
- use File::Temp qw/ tempfile tempdir /;
+ use File::Temp qw/ tempfile tempdir /;
$dir = tempdir( CLEANUP => 1 );
($fh, $filename) = tempfile( DIR => $dir );
my $count = 0;
until (defined(fileno(FH)) || $count++ > 100) {
$base_name =~ s/-(\d+)$/"-" . (1 + $1)/e;
+ # O_EXCL is required for security reasons.
sysopen(FH, $base_name, O_WRONLY|O_EXCL|O_CREAT);
}
if (defined(fileno(FH))
=head2 How can I manipulate fixed-record-length files?
-The most efficient way is using pack() and unpack(). This is faster than
-using substr() when taking many, many strings. It is slower for just a few.
+The most efficient way is using L<pack()|perlfunc/"pack"> and
+L<unpack()|perlfunc/"unpack">. This is faster than using
+L<substr()|perlfunc/"substr"> when taking many, many strings. It is
+slower for just a few.
Here is a sample chunk of code to break up and put back together again
some fixed-format input lines, in this case from the output of a normal,
# sample input line:
# 15158 p5 T 0:00 perl /home/tchrist/scripts/now-what
- $PS_T = 'A6 A4 A7 A5 A*';
- open(PS, "ps|");
- print scalar <PS>;
- while (<PS>) {
- ($pid, $tt, $stat, $time, $command) = unpack($PS_T, $_);
- for $var (qw!pid tt stat time command!) {
- print "$var: <$$var>\n";
+ my $PS_T = 'A6 A4 A7 A5 A*';
+ open my $ps, '-|', 'ps';
+ print scalar <$ps>;
+ my @fields = qw( pid tt stat time command );
+ while (<$ps>) {
+ my %process;
+ @process{@fields} = unpack($PS_T, $_);
+ for my $field ( @fields ) {
+ print "$field: <$process{$field}>\n";
}
- print 'line=', pack($PS_T, $pid, $tt, $stat, $time, $command),
- "\n";
+ print 'line=', pack($PS_T, @process{@fields} ), "\n";
}
-We've used C<$$var> in a way that forbidden by C<use strict 'refs'>.
-That is, we've promoted a string to a scalar variable reference using
-symbolic references. This is okay in small programs, but doesn't scale
-well. It also only works on global variables, not lexicals.
+We've used a hash slice in order to easily handle the fields of each row.
+Storing the keys in an array means it's easy to operate on them as a
+group or loop over them with for. It also avoids polluting the program
+with global variables and using symbolic references.
=head2 How can I make a filehandle local to a subroutine? How do I pass filehandles between subroutines? How do I make an array of filehandles?
-The fastest, simplest, and most direct way is to localize the typeglob
-of the filehandle in question:
+As of perl5.6, open() autovivifies file and directory handles
+as references if you pass it an uninitialized scalar variable.
+You can then pass these references just like any other scalar,
+and use them in the place of named handles.
- local *TmpHandle;
+ open my $fh, $file_name;
-Typeglobs are fast (especially compared with the alternatives) and
-reasonably easy to use, but they also have one subtle drawback. If you
-had, for example, a function named TmpHandle(), or a variable named
-%TmpHandle, you just hid it from yourself.
+ open local $fh, $file_name;
- sub findme {
- local *HostFile;
- open(HostFile, "</etc/hosts") or die "no /etc/hosts: $!";
- local $_; # <- VERY IMPORTANT
- while (<HostFile>) {
- print if /\b127\.(0\.0\.)?1\b/;
- }
- # *HostFile automatically closes/disappears here
- }
-
-Here's how to use typeglobs in a loop to open and store a bunch of
-filehandles. We'll use as values of the hash an ordered
-pair to make it easy to sort the hash in insertion order.
+ print $fh "Hello World!\n";
- @names = qw(motd termcap passwd hosts);
- my $i = 0;
- foreach $filename (@names) {
- local *FH;
- open(FH, "/etc/$filename") || die "$filename: $!";
- $file{$filename} = [ $i++, *FH ];
- }
-
- # Using the filehandles in the array
- foreach $name (sort { $file{$a}[0] <=> $file{$b}[0] } keys %file) {
- my $fh = $file{$name}[1];
- my $line = <$fh>;
- print "$name $. $line";
- }
-
-For passing filehandles to functions, the easiest way is to
-preface them with a star, as in func(*STDIN).
-See L<perlfaq7/"Passing Filehandles"> for details.
-
-If you want to create many anonymous handles, you should check out the
-Symbol, FileHandle, or IO::Handle (etc.) modules. Here's the equivalent
-code with Symbol::gensym, which is reasonably light-weight:
-
- foreach $filename (@names) {
- use Symbol;
- my $fh = gensym();
- open($fh, "/etc/$filename") || die "open /etc/$filename: $!";
- $file{$filename} = [ $i++, $fh ];
- }
+ process_file( $fh );
-Here's using the semi-object-oriented FileHandle module, which certainly
-isn't light-weight:
+Before perl5.6, you had to deal with various typeglob idioms
+which you may see in older code.
- use FileHandle;
+ open FILE, "> $filename";
+ process_typeglob( *FILE );
+ process_reference( \*FILE );
- foreach $filename (@names) {
- my $fh = FileHandle->new("/etc/$filename") or die "$filename: $!";
- $file{$filename} = [ $i++, $fh ];
- }
+ sub process_typeglob { local *FH = shift; print FH "Typeglob!" }
+ sub process_reference { local $fh = shift; print $fh "Reference!" }
-Please understand that whether the filehandle happens to be a (probably
-localized) typeglob or an anonymous handle from one of the modules
-in no way affects the bizarre rules for managing indirect handles.
-See the next question.
+If you want to create many anonymous handles, you should
+check out the Symbol or IO::Handle modules.
=head2 How can I use a filehandle indirectly?
$fh = \*SOME_FH; # ref to typeglob (bless-able)
$fh = *SOME_FH{IO}; # blessed IO::Handle from *SOME_FH typeglob
-Or, you can use the C<new> method from the FileHandle or IO modules to
+Or, you can use the C<new> method from one of the IO::* modules to
create an anonymous filehandle, store that in a scalar variable,
and use it as though it were a normal filehandle.
- use FileHandle;
- $fh = FileHandle->new();
-
use IO::Handle; # 5.004 or higher
$fh = IO::Handle->new();
Perl is expecting a filehandle, an indirect filehandle may be used
instead. An indirect filehandle is just a scalar variable that contains
a filehandle. Functions like C<print>, C<open>, C<seek>, or
-the C<< <FH> >> diamond operator will accept either a read filehandle
+the C<< <FH> >> diamond operator will accept either a named filehandle
or a scalar variable containing one:
($ifh, $ofh, $efh) = (*STDIN, *STDOUT, *STDERR);
That block is a proper block like any other, so you can put more
complicated code there. This sends the message out to one of two places:
- $ok = -x "/bin/cat";
+ $ok = -x "/bin/cat";
print { $ok ? $fd[1] : $fd[2] } "cat stat $ok\n";
- print { $fd[ 1+ ($ok || 0) ] } "cat stat $ok\n";
+ print { $fd[ 1+ ($ok || 0) ] } "cat stat $ok\n";
This approach of treating C<print> and C<printf> like object methods
calls doesn't work for the diamond operator. That's because it's a
real operator, not just a function with a comma-less argument. Assuming
you've been storing typeglobs in your structure as we did above, you
-can use the built-in function named C<readline> to reads a record just
+can use the built-in function named C<readline> to read a record just
as C<< <> >> does. Given the initialization shown above for @fd, this
-would work, but only because readline() require a typeglob. It doesn't
+would work, but only because readline() requires a typeglob. It doesn't
work with objects or strings, which might be a bug we haven't fixed yet.
$got = readline($fd[0]);
=head2 How can I output my numbers with commas added?
-This one will do it for you:
-
- sub commify {
- my $number = shift;
- 1 while ($number =~ s/^([-+]?\d+)(\d{3})/$1,$2/);
- return $number;
- }
+This subroutine will add commas to your number:
- $n = 23659019423.2331;
- print "GOT: ", commify($n), "\n";
+ sub commify {
+ local $_ = shift;
+ 1 while s/^([-+]?\d+)(\d{3})/$1,$2/;
+ return $_;
+ }
- GOT: 23,659,019,423.2331
+This regex from Benjamin Goldberg will add commas to numbers:
-You can't just:
+ s/(^[-+]?\d+?(?=(?>(?:\d{3})+)(?!\d))|\G\d{3}(?=\d))/$1,/g;
- s/^([-+]?\d+)(\d{3})/$1,$2/g;
+It is easier to see with comments:
-because you have to put the comma in and then recalculate your
-position.
-
-Alternatively, this code commifies all numbers in a line regardless of
-whether they have decimal portions, are preceded by + or -, or
-whatever:
-
- # from Andrew Johnson <ajohnson@gpu.srv.ualberta.ca>
- sub commify {
- my $input = shift;
- $input = reverse $input;
- $input =~ s<(\d\d\d)(?=\d)(?!\d*\.)><$1,>g;
- return scalar reverse $input;
- }
+ s/(
+ ^[-+]? # beginning of number.
+ \d{1,3}? # first digits before first comma
+ (?= # followed by, (but not included in the match) :
+ (?>(?:\d{3})+) # some positive multiple of three digits.
+ (?!\d) # an *exact* multiple, not x * 3 + 1 or whatever.
+ )
+ | # or:
+ \G\d{3} # after the last group, get three digits
+ (?=\d) # but they have to have more digits after them.
+ )/$1,/xg;
=head2 How can I translate tildes (~) in a filename?
open(FH, "+> /path/name"); # WRONG (almost always)
Whoops. You should instead use this, which will fail if the file
-doesn't exist.
+doesn't exist.
open(FH, "+< /path/name"); # open for update
To open a file without blocking, creating if necessary:
- sysopen(FH, "/tmp/somefile", O_WRONLY|O_NDELAY|O_CREAT)
- or die "can't open /tmp/somefile: $!":
+ sysopen(FH, "/foo/somefile", O_WRONLY|O_NDELAY|O_CREAT)
+ or die "can't open /foo/somefile: $!":
Be warned that neither creation nor deletion of files is guaranteed to
be an atomic operation over NFS. That is, two processes might both
See also the new L<perlopentut> if you have it (new for 5.6).
-=head2 Why do I sometimes get an "Argument list too long" when I use <*>?
+=head2 Why do I sometimes get an "Argument list too long" when I use E<lt>*E<gt>?
The C<< <> >> operator performs a globbing operation (see above).
In Perl versions earlier than v5.6.0, the internal glob() operator forks
Normally perl ignores trailing blanks in filenames, and interprets
certain leading characters (or a trailing "|") to mean something
-special. To avoid this, you might want to use a routine like the one below.
-It turns incomplete pathnames into explicit relative ones, and tacks a
-trailing null byte on the name to make perl leave it alone:
-
- sub safe_filename {
- local $_ = shift;
- s#^([^./])#./$1#;
- $_ .= "\0";
- return $_;
- }
+special.
- $badpath = "<<<something really wicked ";
- $fn = safe_filename($badpath");
- open(FH, "> $fn") or "couldn't open $badpath: $!";
+The three argument form of open() lets you specify the mode
+separately from the filename. The open() function treats
+special mode characters and whitespace in the filename as
+literals
-This assumes that you are using POSIX (portable operating systems
-interface) paths. If you are on a closed, non-portable, proprietary
-system, you may have to adjust the C<"./"> above.
+ open FILE, "<", " file "; # filename is " file "
+ open FILE, ">", ">file"; # filename is ">file"
-It would be a lot clearer to use sysopen(), though:
+It may be a lot clearer to use sysopen(), though:
use Fcntl;
$badpath = "<<<something really wicked ";
sysopen (FH, $badpath, O_WRONLY | O_CREAT | O_TRUNC)
or die "can't open $badpath: $!";
-For more information, see also the new L<perlopentut> if you have it
-(new for 5.6).
-
=head2 How can I reliably rename a file?
-If your operating system supports a proper mv(1) utility or its functional
-equivalent, this works:
+If your operating system supports a proper mv(1) utility or its
+functional equivalent, this works:
rename($old, $new) or system("mv", $old, $new);
Slavish adherence to portability concerns shouldn't get in the way of
your getting your job done.)
-For more information on file locking, see also
+For more information on file locking, see also
L<perlopentut/"File Locking"> if you have it (new for 5.6).
=back
-=head2 Why can't I just open(FH, ">file.lock")?
+=head2 Why can't I just open(FH, "E<gt>file.lock")?
A common bit of code B<NOT TO USE> is this:
atomic test-and-set instruction. In theory, this "ought" to work:
sysopen(FH, "file.lock", O_WRONLY|O_EXCL|O_CREAT)
- or die "can't open file.lock: $!":
+ or die "can't open file.lock: $!";
except that lamentably, file creation (and deletion) is not atomic
over NFS, so this won't work (at least, not every time) over the net.
=head2 How do I get a file's timestamp in perl?
-If you want to retrieve the time at which the file was last read,
-written, or had its meta-data (owner, etc) changed, you use the B<-M>,
-B<-A>, or B<-C> file test operations as documented in L<perlfunc>. These
-retrieve the age of the file (measured against the start-time of your
-program) in days as a floating point number. To retrieve the "raw"
-time in seconds since the epoch, you would call the stat function,
-then use localtime(), gmtime(), or POSIX::strftime() to convert this
-into human-readable form.
+If you want to retrieve the time at which the file was last
+read, written, or had its meta-data (owner, etc) changed,
+you use the B<-M>, B<-A>, or B<-C> file test operations as
+documented in L<perlfunc>. These retrieve the age of the
+file (measured against the start-time of your program) in
+days as a floating point number. Some platforms may not have
+all of these times. See L<perlport> for details. To
+retrieve the "raw" time in seconds since the epoch, you
+would call the stat function, then use localtime(),
+gmtime(), or POSIX::strftime() to convert this into
+human-readable form.
Here's an example:
=head2 How do I print to more than one file at once?
-If you only have to do this once, you can do this:
+To connect one filehandle to several output filehandles,
+you can use the IO::Tee or Tie::FileHandle::Multiplex modules.
- for $fh (FH1, FH2, FH3) { print $fh "whatever\n" }
+If you only have to do this once, you can print individually
+to each filehandle.
-To connect up to one filehandle to several output filehandles, it's
-easiest to use the tee(1) program if you have it, and let it take care
-of the multiplexing:
+ for $fh (FH1, FH2, FH3) { print $fh "whatever\n" }
- open (FH, "| tee file1 file2 file3");
+=head2 How can I read in an entire file all at once?
-Or even:
+You can use the File::Slurp module to do it in one step.
- # make STDOUT go to three files, plus original STDOUT
- open (STDOUT, "| tee file1 file2 file3") or die "Teeing off: $!\n";
- print "whatever\n" or die "Writing: $!\n";
- close(STDOUT) or die "Closing: $!\n";
+ use File::Slurp;
-Otherwise you'll have to write your own multiplexing print
-function--or your own tee program--or use Tom Christiansen's,
-at http://www.cpan.org/authors/id/TOMC/scripts/tct.gz , which is
-written in Perl and offers much greater functionality
-than the stock version.
-
-=head2 How can I read in an entire file all at once?
+ $all_of_it = read_file($filename); # entire file in scalar
+ @all_lines = read_file($filename); # one line perl element
The customary Perl approach for processing all the lines in a file is to
do so one line at a time:
while (<INPUT>) {
chomp;
# do something with $_
- }
+ }
close(INPUT) || die "can't close $file: $!";
This is tremendously more efficient than reading the entire file into
@lines = <INPUT>;
-you should think long and hard about why you need everything loaded
-at once. It's just not a scalable solution. You might also find it
-more fun to use the standard DB_File module's $DB_RECNO bindings,
-which allow you to tie an array to a file so that accessing an element
-the array actually accesses the corresponding line in the file.
-
-On very rare occasion, you may have an algorithm that demands that
-the entire file be in memory at once as one scalar. The simplest solution
-to that is
-
- $var = `cat $file`;
+you should think long and hard about why you need everything loaded at
+once. It's just not a scalable solution. You might also find it more
+fun to use the standard Tie::File module, or the DB_File module's
+$DB_RECNO bindings, which allow you to tie an array to a file so that
+accessing an element the array actually accesses the corresponding
+line in the file.
-Being in scalar context, you get the whole thing. In list context,
-you'd get a list of all the lines:
-
- @lines = `cat $file`;
-
-This tiny but expedient solution is neat, clean, and portable to
-all systems on which decent tools have been installed. For those
-who prefer not to use the toolbox, you can of course read the file
-manually, although this makes for more complicated code.
+You can read the entire filehandle contents into a scalar.
{
local(*INPUT, $/);
$var = <INPUT>;
}
-That temporarily undefs your record separator, and will automatically
+That temporarily undefs your record separator, and will automatically
close the file at block exit. If the file is already open, just use this:
$var = do { local $/; <INPUT> };
+For ordinary files you can also use the read function.
+
+ read( INPUT, $var, -s INPUT );
+
+The third argument tests the byte size of the data on the INPUT filehandle
+and reads that many bytes into the buffer $var.
+
=head2 How can I read in a file by paragraphs?
Use the C<$/> variable (see L<perlvar> for details). You can either
for instance, gets treated as two paragraphs and not three), or
C<"\n\n"> to accept empty paragraphs.
-Note that a blank line must have no blanks in it. Thus
+Note that a blank line must have no blanks in it. Thus
S<C<"fred\n \nstuff\n\n">> is one paragraph, but C<"fred\n\nstuff\n\n"> is two.
=head2 How can I read a single character from a file? From the keyboard?
If you check L<perlfunc/open>, you'll see that several of the ways
to call open() should do the trick. For example:
- open(LOG, ">>/tmp/logfile");
+ open(LOG, ">>/foo/logfile");
open(STDERR, ">&LOG");
Or even with a literal numeric descriptor:
Note that "<&STDIN" makes a copy, but "<&=STDIN" make
an alias. That means if you close an aliased handle, all
-aliases become inaccessible. This is not true with
+aliases become inaccessible. This is not true with
a copied one.
Error checking, as always, has been left as an exercise for the reader.
Or, just use the fdopen(3S) feature of open():
- {
- local *F;
+ {
+ local *F;
open F, "<&=$fd" or die "Cannot reopen fd=$fd: $!";
close F;
}
-=head2 Why can't I use "C:\temp\foo" in DOS paths? What doesn't `C:\temp\foo.exe` work?
+=head2 Why can't I use "C:\temp\foo" in DOS paths? Why doesn't `C:\temp\foo.exe` work?
Whoops! You just put a tab and a formfeed into that filename!
Remember that within double quoted strings ("like\this"), the
This is elaborately and painstakingly described in the
F<file-dir-perms> article in the "Far More Than You Ever Wanted To
-Know" collection in http://www.cpan.org/olddoc/FMTEYEWTK.tgz .
+Know" collection in http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz .
The executive summary: learn how your filesystem works. The
permissions on a file say what can happen to the data in that file.
srand;
rand($.) < 1 && ($line = $_) while <>;
-This has a significant advantage in space over reading the whole
-file in. A simple proof by induction is available upon
-request if you doubt the algorithm's correctness.
+This has a significant advantage in space over reading the whole file
+in. You can find a proof of this method in I<The Art of Computer
+Programming>, Volume 2, Section 3.4.2, by Donald E. Knuth.
+
+You can use the File::Random module which provides a function
+for that algorithm:
+
+ use File::Random qw/random_line/;
+ my $line = random_line($filename);
+
+Another way is to use the Tie::File module, which treats the entire
+file as an array. Simply access a random array element.
=head2 Why do I get weird spaces when I print an array of lines?