(S) A severe warning (mandatory).
(F) A fatal error (trappable).
(P) An internal error you should never see (trappable).
- (X) A very fatal error (non-trappable).
+ (X) A very fatal error (nontrappable).
(A) An alien error message (not generated by Perl).
Optional warnings are enabled by using the B<-w> switch. Warnings may
-be captured by setting C<$SIG{__WARN__}> to a reference to a routine that will be
-called on each warning instead of printing it. See L<perlvar>.
+be captured by setting C<$SIG{__WARN__}> to a reference to a routine that
+will be called on each warning instead of printing it. See L<perlvar>.
Trappable errors may be trapped using the eval operator. See
L<perlfunc/eval>.
=item %s: Command not found
(A) You've accidentally run your script through B<csh> instead
-of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
-into Perl yourself.
+of Perl. Check the #! line, or manually feed your script into
+Perl yourself.
=item %s: Expression syntax
(A) You've accidentally run your script through B<csh> instead
-of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
-into Perl yourself.
+of Perl. Check the #! line, or manually feed your script into
+Perl yourself.
=item %s: Undefined variable
(A) You've accidentally run your script through B<csh> instead
-of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
-into Perl yourself.
+of Perl. Check the #! line, or manually feed your script into
+Perl yourself.
=item %s: not found
(A) You've accidentally run your script through the Bourne shell
-instead of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
+instead of Perl. Check the #! line, or manually feed your script
into Perl yourself.
=item B<-P> not allowed for setuid/setgid script
=item Allocation too large: %lx
-(X) You can't allocate more than 64K on an MSDOS machine.
+(X) You can't allocate more than 64K on an MS-DOS machine.
=item Allocation too large
(F) You can't allocate more than 2^31+"small amount" bytes.
+=item Applying %s to %s will act on scalar(%s)
+
+(W) The pattern match (//), substitution (s///), and translation (tr///)
+operators work on scalar values. If you apply one of them to an array
+or a hash, it will convert the array or hash to a scalar value -- the
+length of an array, or the population info of a hash -- and then work on
+that scalar value. This is probably not what you meant to do. See
+L<perlfunc/grep> and L<perlfunc/map> for alternatives.
+
=item Arg too short for msgsnd
(F) msgsnd() requires a string at least as long as sizeof(long).
=item Args must match #! line
(F) The setuid emulator requires that the arguments Perl was invoked
-with match the arguments specified on the #! line.
+with match the arguments specified on the #! line. Since some systems
+impose a one-argument limit on the #! line, try combining switches;
+for example, turn C<-w -U> into C<-wU>.
=item Argument "%s" isn't numeric%s
be garbage collected on exit. An SV was discovered to be outside any
of those arenas.
-=item Attempt to free non-existent shared string
+=item Attempt to free nonexistent shared string
(P) Perl maintains a reference counted internal table of strings to
optimize the storage and access of hash keys and other strings. This
=item Badly placed ()'s
(A) You've accidentally run your script through B<csh> instead
-of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
-into Perl yourself.
+of Perl. Check the #! line, or manually feed your script into
+Perl yourself.
+
+=item Bareword "%s" not allowed while "strict subs" in use
+
+(F) With "strict subs" in use, a bareword is only allowed as a
+subroutine identifier, in curly braces or to the left of the "=>" symbol.
+Perhaps you need to predeclare a subroutine?
=item BEGIN failed--compilation aborted
(F) An untrapped exception was raised while executing a BEGIN subroutine.
Compilation stops immediately and the interpreter is exited.
+=item BEGIN not safe after errors--compilation aborted
+
+(F) Perl found a C<BEGIN {}> subroutine (or a C<use> directive, which
+implies a C<BEGIN {}>) after one or more compilation errors had
+already occurred. Since the intended environment for the C<BEGIN {}>
+could not be guaranteed (due to the errors), and since subsequent code
+likely depends on its correct operation, Perl just gave up.
+
=item bind() on closed fd
(W) You tried to do a bind on a closed socket. Did you forget to check
there isn't a current block. Note that an "if" or "else" block doesn't
count as a "loopish" block, as doesn't a block given to sort(). You can
usually double the curlies to get the same effect though, because the inner
-curlies will be considered a block that loops once. See L<perlfunc/last>.
+curlies will be considered a block that loops once. See L<perlfunc/next>.
=item Can't "redo" outside a block
there isn't a current block. Note that an "if" or "else" block doesn't
count as a "loopish" block, as doesn't a block given to sort(). You can
usually double the curlies to get the same effect though, because the inner
-curlies will be considered a block that loops once. See L<perlfunc/last>.
+curlies will be considered a block that loops once. See L<perlfunc/redo>.
=item Can't bless non-reference value
=item Can't break at that line
-(S) A warning intended for while running within the debugger, indicating
+(S) A warning intended to only be printed while running within the debugger, indicating
the line number specified wasn't the location of a statement that could
be stopped at.
=item Can't call method "%s" on unblessed reference
-(F) A method call must know what package it's supposed to run in. It
+(F) A method call must know in what package it's supposed to run. It
ordinarily finds this out from the object reference you supply, but
you didn't supply an object reference in this case. A reference isn't
an object reference until it has been blessed. See L<perlobj>.
(S) The creation of the new file failed for the indicated reason.
-=item Can't do in-place edit without backup
+=item Can't do inplace edit without backup
-(F) You're on a system such as MSDOS that gets confused if you try reading
-from a deleted (but still opened) file. You have to say B<-i>C<.bak>, or some
+(F) You're on a system such as MS-DOS that gets confused if you try reading
+from a deleted (but still opened) file. You have to say C<-i.bak>, or some
such.
=item Can't do inplace edit: %s E<gt> 14 characters
(F) A fatal error occurred while trying to fork while opening a pipeline.
-=item Unsupported function fork
-
-(F) Your version of executable does not support forking.
-
-Note that under some systems, like OS/2, there may be different flavors of
-Perl executables, some of which may support fork, some not. Try changing
-the name you call Perl by to C<perl_>, C<perl__>, and so on.
-
=item Can't get filespec - stale stat buffer?
(S) A warning peculiar to VMS. This arises because of the difference between
=item Can't locate %s in @INC
(F) You said to do (or require, or use) a file that couldn't be found
-in any of the libraries mentioned in @INC. Perhaps you need to set
-the PERL5LIB environment variable to say where the extra library is,
-or maybe the script needs to add the library name to @INC. Or maybe
+in any of the libraries mentioned in @INC. Perhaps you need to set the
+PERL5LIB or PERL5OPT environment variable to say where the extra library
+is, or maybe the script needs to add the library name to @INC. Or maybe
you just misspelled the name of the file. See L<perlfunc/require>.
=item Can't locate object method "%s" via package "%s"
(F) You aren't allowed to assign to the item indicated, or otherwise try to
change it, such as with an auto-increment.
-=item Can't modify non-existent substring
+=item Can't modify nonexistent substring
(P) The internal routine that does assignment to a substr() was handed
a NULL.
=item Can't use an undefined value as %s reference
(F) A value used as either a hard reference or a symbolic reference must
-be a defined value. This helps to de-lurk some insidious errors.
+be a defined value. This helps to delurk some insidious errors.
=item Can't use global %s in "my"
(W) You tried to close a filehandle that was never opened.
+=item Compilation failed in require
+
+(F) Perl could not compile a file specified in a C<require> statement.
+Perl uses this generic message when none of the errors that it encountered
+were severe enough to halt compilation immediately.
+
=item connect() on closed fd
(W) You tried to do a connect on a closed socket. Did you forget to check
inlining. See L<perlsub/"Constant Functions"> for commentary and
workarounds.
+=item Constant subroutine %s undefined
+
+(S) You undefined a subroutine which had previously been eligible for
+inlining. See L<perlsub/"Constant Functions"> for commentary and
+workarounds.
+
=item Copy method did not return a reference
(F) The method which overloads "=" is buggy. See L<overload/Copy Constructor>.
(F) You passed die() an empty string (the equivalent of C<die "">) or
you called it with no args and both C<$@> and C<$_> were empty.
-=item Do you need to pre-declare %s?
+=item Do you need to predeclare %s?
(S) This is an educated guess made in conjunction with the message "%s
found where operator expected". It often means a subroutine or module
=item Global symbol "%s" requires explicit package name
-(F) You've said "use strict vars", which indicates that all variables must
-either be lexically scoped (using "my"), or explicitly qualified to
+(F) You've said "use strict vars", which indicates that all variables
+must either be lexically scoped (using "my"), or explicitly qualified to
say which package the global variable is in (using "::").
=item goto must have label
to iterate over %ENV which violates the syntactic rules governing logical
names. Because it cannot be translated normally, it is skipped, and will not
appear in %ENV. This may be a benign occurrence, as some software packages
-might directly modify logical name tables and introduce non-standard names,
+might directly modify logical name tables and introduce nonstandard names,
or it may indicate that a logical name table has been corrupted.
=item Illegal character %s (carriage return)
(F) A carriage return character was found in the input. This is an
error, and not a warning, because carriage return characters can break
-here documents (e.g. C<print E<lt>E<lt>EOF;>). Note that Perl always
-opens scripts in text mode, so this error should only occur in C<eval>.
+multi-line strings, including here documents (e.g., C<print E<lt>E<lt>EOF;>).
+
+Under Unix, this error is usually caused by executing Perl code --
+either the main program, a module, or an eval'd string -- that was
+transferred over a network connection from a non-Unix system without
+properly converting the text file format.
+
+Under systems that use something other than '\n' to delimit lines of
+text, this error can also be caused by reading Perl code from a file
+handle that is in binary mode (as set by the C<binmode> operator).
+
+In either case, the Perl code in question will probably need to be
+converted with something like C<s/\x0D\x0A?/\n/g> before it can be
+executed.
=item Illegal division by zero
(W) You may have tried to use an 8 or 9 in a octal number. Interpretation
of the octal number stopped before the 8 or 9.
+=item Illegal switch in PERL5OPT: %s
+
+(X) The PERL5OPT environment variable may only be used to set the
+following switches: B<-[DIMUdmw]>.
+
+=item In string, @%s now must be written as \@%s
+
+(F) It used to be that Perl would try to guess whether you wanted an
+array interpolated or a literal @. It did this when the string was first
+used at runtime. Now strings are parsed at compile time, and ambiguous
+instances of @ must be disambiguated, either by prepending a backslash to
+indicate a literal, or by declaring (or using) the array within the
+program before the string (lexically). (Someday it will simply assume
+that an unbackslashed @ interpolates an array.)
+
=item Insecure dependency in %s
(F) You tried to do something that the tainting mechanism didn't like.
(P) Something went badly wrong in the regular expression parser.
+=item internal error: glob failed
+
+(P) Something went wrong with the external program(s) used for C<glob>
+and C<E<lt>*.cE<gt>>. This may mean that your csh (C shell) is
+broken. If so, you should change all of the csh-related variables in
+config.sh: If you have tcsh, make the variables refer to it as if it
+were csh (e.g. C<full_csh='/usr/bin/tcsh'>); otherwise, make them all
+empty (except that C<d_csh> should be C<'undef'>) so that Perl will
+think csh is missing. In either case, after editing config.sh, run
+C<./Configure -S> and rebuild Perl.
+
=item internal urp in regexp at /%s/
(P) Something went badly awry in the regular expression parser.
(F) The range specified in a character class had a minimum character
greater than the maximum character. See L<perlre>.
+=item Invalid type in pack: '%s'
+
+(F) The given character is not a valid pack type. See L<perlop/pack>.
+
+=item Invalid type in unpack: '%s'
+
+(F) The given character is not a valid unpack type. See L<perlop/unpack>.
+
=item ioctl is not implemented
(F) Your machine apparently doesn't implement ioctl(), which is pretty
(W) You tried to do a listen on a closed socket. Did you forget to check
the return value of your socket() call? See L<perlfunc/listen>.
-=item Literal @%s now requires backslash
-
-(F) It used to be that Perl would try to guess whether you wanted an
-array interpolated or a literal @. It did this when the string was
-first used at runtime. Now strings are parsed at compile time, and
-ambiguous instances of @ must be disambiguated, either by putting a
-backslash to indicate a literal, or by declaring (or using) the array
-within the program before the string (lexically). (Someday it will simply
-assume that an unbackslashed @ interpolates an array.)
-
=item Method for operation %s not found in package %s during blessing
(F) An attempt was made to specify an entry in an overloading table that
Another way is to assign to a substr() that's off the end of the string.
-=item Modification of non-creatable array value attempted, subscript %d
+=item Modification of noncreatable array value attempted, subscript %d
(F) You tried to make an array value spring into existence, and the
subscript was probably negative, even counting from end of the array
backwards.
-=item Modification of non-creatable hash value attempted, subscript "%s"
+=item Modification of noncreatable hash value attempted, subscript "%s"
(F) You tried to make a hash value spring into existence, and it couldn't
be created for some peculiar reason.
=item Name "%s::%s" used only once: possible typo
-(W) Typographical errors often show up as unique variable names. If you
-had a good reason for having a unique name, then just mention it
-again somehow to suppress the message (the C<use vars> pragma is
-provided for just this purpose).
+(W) Typographical errors often show up as unique variable names.
+If you had a good reason for having a unique name, then just mention
+it again somehow to suppress the message. The C<use vars> pragma is
+provided for just this purpose.
=item Negative length
=item No command into which to pipe on command line
(F) An error peculiar to VMS. Perl handles its own command line redirection,
-and found a '|' at the end of the command line, so it doesn't know whither you
+and found a '|' at the end of the command line, so it doesn't know where you
want to pipe the output from this command.
=item No DB::DB routine defined
(F) An error peculiar to VMS. Perl handles its own command line redirection,
and found a lone 'E<gt>' at the end of the command line, so it doesn't know
-whither you wanted to redirect stdout.
+where you wanted to redirect stdout.
=item No output file after E<gt> or E<gt>E<gt> on command line
=item Out of memory!
(X|F) The malloc() function returned 0, indicating there was insufficient
-remaining memory (or virtual memory) to satisfy the request.
+remaining memory (or virtual memory) to satisfy the request.
The request was judged to be small, so the possibility to trap it
depends on the way perl was compiled. By default it is not trappable.
You probably wrote something like this:
- @list = qw(
+ @list = qw(
a # a comment
b # another comment
);
when you should have written this:
@list = qw(
- a
- b
+ a
+ b
);
If you really want comments, build your list the
=item Possible attempt to separate words with commas
(W) qw() lists contain items separated by whitespace; therefore commas
-aren't needed to separate the items. (You may have used different
+aren't needed to separate the items. (You may have used different
delimiters than the parentheses shown here; braces are also frequently
used.)
-You probably wrote something like this:
+You probably wrote something like this:
qw! a, b, c !;
open(FOO || die);
-because of the strict regularization of Perl 5's grammar into unary and
-list operators. (The old open was a little of both.) You must put
-parentheses around the filehandle, or use the new "or" operator instead of "||".
+because of the strict regularization of Perl 5's grammar into unary
+and list operators. (The old open was a little of both.) You must
+put parentheses around the filehandle, or use the new "or" operator
+instead of "||".
=item print on closed filehandle %s
=item Probable precedence problem on %s
-(W) The compiler found a bare word where it expected a conditional,
+(W) The compiler found a bareword where it expected a conditional,
which often indicates that an || or && was parsed as part of the
last argument of the previous construct, for example:
open FOO || die;
-=item Prototype mismatch: (%s) vs (%s)
+=item Prototype mismatch: %s vs %s
-(S) The subroutine being defined had a pre-declared (forward) declaration
-with a different function prototype.
+(S) The subroutine being declared or defined had previously been declared
+or defined with a different function prototype.
=item Read on closed filehandle E<lt>%sE<gt>
=item Reallocation too large: %lx
-(F) You can't allocate more than 64K on an MSDOS machine.
+(F) You can't allocate more than 64K on an MS-DOS machine.
=item Recompile perl with B<-D>DEBUGGING to use B<-D> switch
=item Script is not setuid/setgid in suidperl
-(F) Oddly, the suidperl program was invoked on a script with its setuid
-or setgid bit not set. This doesn't make much sense.
+(F) Oddly, the suidperl program was invoked on a script without a setuid
+or setgid bit set. This doesn't make much sense.
=item Search pattern not terminated
(F) The lexer couldn't find the final delimiter of a // or m{}
construct. Remember that bracketing delimiters count nesting level.
-=item seek() on unopened file
+=item %sseek() on unopened file
-(W) You tried to use the seek() function on a filehandle that was either
-never opened or has been closed since.
+(W) You tried to use the seek() or sysseek() function on a filehandle that
+was either never opened or has since been closed.
=item select not implemented
=item Server error
-Also known as "500 Server error". This is a CGI error, not a Perl
-error. You need to make sure your script is executable, is accessible
-by the user CGI is running the script under (which is probably not
-the user account you tested it under), does not rely on any environment
-variables (like PATH) from the user it isn't running under, and isn't
-in a location where the CGI server can't find it, basically, more or less.
+Also known as "500 Server error".
+
+B<This is a CGI error, not a Perl error>.
+
+You need to make sure your script is executable, is accessible by the user
+CGI is running the script under (which is probably not the user account you
+tested it under), does not rely on any environment variables (like PATH)
+from the user it isn't running under, and isn't in a location where the CGI
+server can't find it, basically, more or less. Please see the following
+for more information:
+
+ http://www.perl.com/perl/faq/idiots-guide.html
+ http://www.perl.com/perl/faq/perl-cgi-faq.html
+ ftp://rtfm.mit.edu/pub/usenet/news.answers/www/cgi-faq
+ http://hoohoo.ncsa.uiuc.edu/cgi/interface.html
+ http://www-genome.wi.mit.edu/WWW/faqs/www-security-faq.html
=item setegid() not implemented
=item Stat on unopened file E<lt>%sE<gt>
(W) You tried to use the stat() function (or an equivalent file test)
-on a filehandle that was either never opened or has been closed since.
+on a filehandle that was either never opened or has since been closed.
=item Statement unlikely to be reached
(P) The substitution was looping infinitely. (Obviously, a
substitution shouldn't iterate more times than there are characters of
-input, which is what happened.) See the discussion of substitution in
+input, which is what happened.) See the discussion of substitution in
L<perlop/"Quote and Quote-like Operators">.
=item Substitution pattern not terminated
=item syntax error at line %d: `%s' unexpected
(A) You've accidentally run your script through the Bourne shell
-instead of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
+instead of Perl. Check the #! line, or manually feed your script
into Perl yourself.
=item System V IPC is not implemented on this machine
(W) The filehandle you're writing to got itself closed sometime before now.
Check your logic flow.
-=item tell() on unopened file
+=item %stell() on unopened file
-(W) You tried to use the tell() function on a filehandle that was either
-never opened or has been closed since.
+(W) You tried to use the tell() or systell() function on a filehandle that
+was either never opened or has since been closed.
=item Test on unopened file E<lt>%sE<gt>
(F) There has to be at least one argument to syscall() to specify the
system call to call, silly dilly.
-=item Too late for "B<-T>" option (try putting it first)
+=item Too late for "B<-T>" option
+
+(X) The #! line (or local equivalent) in a Perl script contains the
+B<-T> option, but Perl was not invoked with B<-T> in its command line.
+This is an error because, by the time Perl discovers a B<-T> in a
+script, it's too late to properly taint everything from the environment.
+So Perl gives up.
+
+If the Perl script is being executed as a command using the #!
+mechanism (or its local equivalent), this error can usually be fixed
+by editing the #! line so that the B<-T> option is a part of Perl's
+first argument: e.g. change C<perl -n -T> to C<perl -T -n>.
+
+If the Perl script is being executed as C<perl scriptname>, then the
+B<-T> option must appear on the command line: C<perl -T scriptname>.
-(X) The #! line in a Perl script contains the B<-T> option, but Perl
-was not invoked with B<-T> in its argument list. Due to the way Perl
-handles tainting, by the time Perl discovers a B<-T> in a script, it's
-too late to properly taint everything from the environment. So Perl
-gives up.
+=item Too late for "-%s" option
-This error can usually be fixed by editing the "#!" line so that the
-B<-T> option is in the Perl program's first argument. (Many operating
-systems that implement the "#!" feature only pick up one argument from
-it, so Perl has to get the rest on its own.)
+(X) The #! line (or local equivalent) in a Perl script contains the
+B<-M> or B<-m> option. This is an error because B<-M> and B<-m> options
+are not intended for use inside scripts. Use the C<use> pragma instead.
=item Too many ('s
=item Too many )'s
(A) You've accidentally run your script through B<csh> instead
-of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
-into Perl yourself.
+of Perl. Check the #! line, or manually feed your script into
+Perl yourself.
=item Too many args to syscall
=item Unquoted string "%s" may clash with future reserved word
-(W) You used a bare word that might someday be claimed as a reserved word.
+(W) You used a bareword that might someday be claimed as a reserved word.
It's best to put such a word in quotes, or capitalize it somehow, or insert
an underbar into it. You might also declare it as a subroutine.
-=item Unrecognized character \%03o ignored
+=item Unrecognized character %s
-(S) A garbage character was found in the input, and ignored, in case it's
-a weird control character on an EBCDIC machine, or some such.
+(F) The Perl parser has no idea what to do with the specified character
+in your Perl script (or eval). Perhaps you tried to run a compressed
+script, a binary program, or a directory as a Perl program.
=item Unrecognized signal name "%s"
(W) A file operation was attempted on a filename, and that operation
failed, PROBABLY because the filename contained a newline, PROBABLY
-because you forgot to chop() or chomp() it off. See L<perlfunc/chop>.
+because you forgot to chop() or chomp() it off. See L<perlfunc/chomp>.
=item Unsupported directory function "%s" called
(F) Your machine doesn't support opendir() and readdir().
+=item Unsupported function fork
+
+(F) Your version of executable does not support forking.
+
+Note that under some systems, like OS/2, there may be different flavors of
+Perl executables, some of which may support fork, some not. Try changing
+the name you call Perl by to C<perl_>, C<perl__>, and so on.
+
=item Unsupported function %s
(F) This machines doesn't implement the indicated function, apparently.
finding it. Chances are you left some needed parentheses out earlier in
the line, and you really meant a "less than".
+=item Use of "$$<digit>" to mean "${$}<digit>" is deprecated
+
+(D) Perl versions before 5.004 misinterpreted any type marker followed
+by "$" and a digit. For example, "$$0" was incorrectly taken to mean
+"${$}0" instead of "${$0}". This bug is (mostly) fixed in Perl 5.004.
+
+However, the developers of Perl 5.004 could not fix this bug completely,
+because at least two widely-used modules depend on the old meaning of
+"$$0" in a string. So Perl 5.004 still interprets "$$<digit>" in the
+old (broken) way inside strings; but it generates this message as a
+warning. And in Perl 5.005, this special treatment will cease.
+
=item Use of $# is deprecated
(D) This was an ill-advised attempt to emulate a poorly defined B<awk> feature.
(F) You attempted to use a feature of printf that is accessible from
only C. This usually means there's a better way to do it in Perl.
-=item Use of %s is deprecated
-
-(D) The construct indicated is no longer recommended for use, generally
-because there's a better way to do it, and also because the old way has
-bad side effects.
-
=item Use of bare E<lt>E<lt> to mean E<lt>E<lt>"" is deprecated
(D) You are now encouraged to use the explicitly quoted form if you
-wish to use a blank line as the terminator of the here-document.
+wish to use an empty line as the terminator of the here-document.
=item Use of implicit split to @_ is deprecated
subroutine's argument list, so it's better if you assign the results of
a split() explicitly to an array (or list).
+=item Use of inherited AUTOLOAD for non-method %s() is deprecated
+
+(D) As an (ahem) accidental feature, C<AUTOLOAD> subroutines are looked
+up as methods (using the C<@ISA> hierarchy) even when the subroutines to
+be autoloaded were called as plain functions (e.g. C<Foo::bar()>), not
+as methods (e.g. C<Foo->bar()> or C<$obj->bar()>).
+
+This bug will be rectified in Perl 5.005, which will use method lookup
+only for methods' C<AUTOLOAD>s. However, there is a significant base
+of existing code that may be using the old behavior. So, as an
+interim step, Perl 5.004 issues an optional warning when non-methods
+use inherited C<AUTOLOAD>s.
+
+The simple rule is: Inheritance will not work when autoloading
+non-methods. The simple fix for old code is: In any module that used to
+depend on inheriting C<AUTOLOAD> for non-methods from a base class named
+C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during startup.
+
+=item Use of %s is deprecated
+
+(D) The construct indicated is no longer recommended for use, generally
+because there's a better way to do it, and also because the old way has
+bad side effects.
+
=item Use of uninitialized value
(W) An undefined value was used as if it were already defined. It was
(W) A copy of the object returned from C<tie> (or C<tied>) was still
valid when C<untie> was called.
-=item Value of %s construct can be "0"; test with defined()
+=item Value of %s can be "0"; test with defined()
-(W) In a conditional expression, you used <HANDLE>, <*> (glob), or
-C<readdir> as a boolean value. Each of these constructs can return a
-value of "0"; that would make the conditional expression false, which
-is probably not what you intended. When using these constructs in
-conditional expressions, test their values with the C<defined> operator.
+(W) In a conditional expression, you used <HANDLE>, <*> (glob), C<each()>,
+or C<readdir()> as a boolean value. Each of these constructs can return a
+value of "0"; that would make the conditional expression false, which is
+probably not what you intended. When using these constructs in conditional
+expressions, test their values with the C<defined> operator.
-=item Variable "%s" is not exported
+=item Variable "%s" is not imported%s
(F) While "use strict" in effect, you referred to a global variable
that you apparently thought was imported from another module, because
This problem can usually be solved by making the inner subroutine
anonymous, using the C<sub {}> syntax. When inner anonymous subs that
reference variables in outer subroutines are called or referenced,
-they are automatically re-bound to the current values of such
+they are automatically rebound to the current values of such
variables.
=item Variable syntax
(A) You've accidentally run your script through B<csh> instead
-of Perl. Check the E<lt>#!E<gt> line, or manually feed your script
-into Perl yourself.
+of Perl. Check the #! line, or manually feed your script into
+Perl yourself.
=item Warning: something's wrong
=item Malformed PERLLIB_PREFIX
-(F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
+(F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
prefix1;prefix2
prefix1 prefix2
-with non-empty prefix1 and prefix2. If C<prefix1> is indeed a prefix of
-a builtin library search path, prefix2 is substituted. The error may appear
-if components are not found, or are too long. See L<perlos2/"PERLLIB_PREFIX">.
+with nonempty prefix1 and prefix2. If C<prefix1> is indeed a prefix
+of a builtin library search path, prefix2 is substituted. The error
+may appear if components are not found, or are too long. See
+"PERLLIB_PREFIX" in F<README.os2>.
=item PERL_SH_DIR too long
-(F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
-C<sh>-shell in. See L<perlos2/"PERL_SH_DIR">.
+(F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
+C<sh>-shell in. See "PERL_SH_DIR" in F<README.os2>.
=item Process terminated by SIG%s
(W) This is a standard message issued by OS/2 applications, while *nix
-applications die in silence. It is considered a feature of the OS/2
-port. One can easily disable this by appropriate sighandlers, see
-L<perlipc/"Signals">. See L<perlos2/"Process terminated by SIGTERM/SIGINT">.
+applications die in silence. It is considered a feature of the OS/2
+port. One can easily disable this by appropriate sighandlers, see
+L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT"
+in F<README.os2>.
=back
projects / p5sagit/p5-mst-13.2.git / blobdiff