desperation):
(W) A warning (optional).
- (D) A deprecation (optional).
- (S) A severe warning (default).
+ (D) A deprecation (enabled by default).
+ (S) A severe warning (enabled by default).
(F) A fatal error (trappable).
(P) An internal error you should never see (trappable).
(X) A very fatal error (nontrappable).
to a reference to a routine that will be called on each warning instead
of printing it. See L<perlvar>.
-Default warnings are always enabled unless they are explicitly disabled
+Severe warnings are always enabled, unless they are explicitly disabled
with the C<warnings> pragma or the B<-X> switch.
Trappable errors may be trapped using the eval operator. See
(W misc) The pattern match (C<//>), substitution (C<s///>), and
transliteration (C<tr///>) operators work on scalar values. If you apply
one of them to an array or a hash, it will convert the array or hash to
-a scalar value -- the length of an array, or the population info of a
-hash -- and then work on that scalar value. This is probably not what
+a scalar value (the length of an array, or the population info of a
+hash) and then work on that scalar value. This is probably not what
you meant to do. See L<perlfunc/grep> and L<perlfunc/map> for
alternatives.
(F) msgsnd() requires a string at least as long as sizeof(long).
-=item %s argument is not a HASH or ARRAY element
+=item %s argument is not a HASH or ARRAY element or a subroutine
-(F) The argument to exists() must be a hash or array element, such as:
+(F) The argument to exists() must be a hash or array element or a
+subroutine with an ampersand, such as:
$foo{$bar}
$ref->{"susie"}[12]
+ &do_something
=item %s argument is not a HASH or ARRAY element or slice
=item A thread exited while %d threads were running
-(W) When using threaded Perl, a thread (not necessarily the main
+(W threads)(S) When using threaded Perl, a thread (not necessarily the main
thread) exited while there were still other threads running.
Usually it's a good idea to first collect the return values of the
created threads by joining them, and only then exit from the main
literals or global values as arguments to the "p" pack() template to
avoid this warning.
+=item Attempt to reload %s aborted.
+
+(F) You tried to load a file with C<use> or C<require> that failed to
+compile once already. Perl will not try to compile this file again
+unless you delete its entry from %INC. See L<perlfunc/require> and
+L<perlvar/%INC>.
+
+=item Attempt to set length of freed array
+
+(W) You tried to set the length of an array which has been freed. You
+can do this by storing a reference to the scalar representing the last index
+of an array and later assigning through that reference. For example
+
+ $r = do {my @a; \$#a};
+ $$r = 503
+
=item Attempt to use reference as lvalue in substr
(W substr) You supplied a reference as the first argument to substr()
used as an lvalue, which is pretty strange. Perhaps you forgot to
dereference it first. See L<perlfunc/substr>.
-=item Bad arg length for %s, is %d, should be %s
+=item Attribute "locked" is deprecated
+
+(D deprecated) You have used the attributes pragam to modify the "locked"
+attribute on a code reference. The :locked attribute is obsolete, has had no
+effect since 5005 threads were removed, and will be removed in the next major
+release of Perl 5.
+
+=item Attribute "unique" is deprecated
+
+(D deprecated) You have used the attributes pragam to modify the "unique"
+attribute on an array, hash or scalar reference. The :unique attribute has
+had no effect since Perl 5.8.8, and will be removed in the next major
+release of Perl 5.
+
+=item Bad arg length for %s, is %d, should be %d
(F) You passed a buffer of the wrong size to one of msgctl(), semctl()
or shmctl(). In C parlance, the correct sizes are, respectively,
$var = 'myvar';
$sym = "mypack::$var";
+=item Bad plugin affecting keyword '%s'
+
+(F) An extension using the keyword plugin mechanism violated the
+plugin API.
+
=item Bad realloc() ignored
(S malloc) An internal routine called realloc() on something that had
(P) An internal request asked to add an array entry to something that
wasn't a symbol table entry.
+=item Bad symbol for dirhandle
+
+(P) An internal request asked to add a dirhandle entry to something
+that wasn't a symbol table entry.
+
+
=item Bad symbol for filehandle
(P) An internal request asked to add a filehandle entry to something
(F) An argument to pack("w",...) was negative. The BER compressed integer
format can only be used with positive integers. See L<perlfunc/pack>.
+=item Cannot convert a reference to %s to typeglob
+
+(F) You manipulated Perl's symbol table directly, stored a reference in it,
+then tried to access that symbol via conventional Perl syntax. The access
+triggers Perl to autovivify that typeglob, but it there is no legal conversion
+from that type of reference to a typeglob.
+
+=item Cannot copy to %s in %s
+
+(P) Perl detected an attempt to copy a value to an internal type that cannot
+be directly assigned not.
+
+=item Cannot find encoding "%s"
+
+(S io) You tried to apply an encoding that did not exist to a filehandle,
+either with open() or binmode().
+
=item Can only compress unsigned integers in pack
(F) An argument to pack("w",...) was not an integer. The BER compressed
(F) Only hard references may be blessed. This is how Perl "enforces"
encapsulation of objects. See L<perlobj>.
+=item Can't "break" in a loop topicalizer
+
+(F) You called C<break>, but you're in a C<foreach> block rather than
+a C<given> block. You probably meant to use C<next> or C<last>.
+
+=item Can't "break" outside a given block
+
+(F) You called C<break>, but you're not inside a C<given> block.
+
=item Can't call method "%s" in empty package "%s"
(F) You called a method correctly, and it correctly indicated a package
(F) Certain types of SVs, in particular real symbol table entries
(typeglobs), can't be forced to stop being what they are.
+=item Can't "continue" outside a when block
+
+(F) You called C<continue>, but you're not inside a C<when>
+or C<default> block.
+
=item Can't create pipe mailbox
(P) An error peculiar to VMS. The process is suffering from exhausted
=item Can't declare class for non-scalar %s in "%s"
(F) Currently, only scalar variables can be declared with a specific
-class qualifier in a "my" or "our" declaration. The semantics may be
+class qualifier in a "my", "our" or "state" declaration. The semantics may be
extended for other types of variables in future.
=item Can't declare %s in "%s"
-(F) Only scalar, array, and hash variables may be declared as "my" or
-"our" variables. They must have ordinary identifiers as names.
+(F) Only scalar, array, and hash variables may be declared as "my", "our" or
+"state" variables. They must have ordinary identifiers as names.
=item Can't do inplace edit: %s is not a regular file
regexp to match something 0 times, just put {0}. The <-- HERE shows in the
regular expression about where the problem was discovered. See L<perlre>.
-=item Can't do setegid!
-
-(P) The setegid() call failed for some reason in the setuid emulator of
-suidperl.
-
-=item Can't do seteuid!
-
-(P) The setuid emulator of suidperl failed for some reason.
-
-=item Can't do setuid
-
-(F) This typically means that ordinary perl tried to exec suidperl to do
-setuid emulation, but couldn't exec it. It looks for a name of the form
-sperl5.000 in the same directory that the perl executable resides under
-the name perl5.000, typically /usr/local/bin on Unix machines. If the
-file is there, check the execute permissions. If it isn't, ask your
-sysadmin why he and/or she removed it.
-
=item Can't do waitpid with flags
(F) This machine doesn't have either waitpid() or wait4(), so only
=item Can't find %s character property "%s"
(F) You used C<\p{}> or C<\P{}> but the character property by that name
-could not be found. Maybe you misspelled the name of the property
-(remember that the names of character properties consist only of
-alphanumeric characters), or maybe you forgot the C<Is> or C<In> prefix?
+could not be found. Maybe you misspelled the name of the property?
+See L<perluniprops/Properties accessible through \p{} and \P{}>
+for a complete list of available properties.
=item Can't find label %s
found in the PATH, or at least not with the correct permissions. The
script exists in the current directory, but PATH prohibits running it.
-=item Can't find %s property definition %s
-
-(F) You may have tried to use C<\p> which means a Unicode property (for
-example C<\p{Lu}> is all uppercase letters). If you did mean to use a
-Unicode property, see L<perlunicode> for the list of known properties.
-If you didn't mean to use a Unicode property, escape the C<\p>, either
-by C<\\p> (just the C<\p>) or by C<\Q\p> (the rest of the string, until
-possible C<\E>).
-
=item Can't find string terminator %s anywhere before EOF
(F) Perl strings can stretch over multiple lines. This message means
unseen whitespace before or after your closing tag. A good programmer's
editor will have a way to help you find these characters.
-=item Can't fork
+=item Can't find Unicode property definition "%s"
+
+(F) You may have tried to use C<\p> which means a Unicode property (for
+example C<\p{Lu}> matches all uppercase letters). If you did mean to use a
+Unicode property, see
+L<perluniprops/Properties accessible through \p{} and \P{}>
+for a complete list of available properties.
+If you didn't mean to use a Unicode property, escape the C<\p>, either
+by C<\\p> (just the C<\p>) or by C<\Q\p> (the rest of the string, until
+possible C<\E>).
+
+=item Can't fork: %s
(F) A fatal error occurred while trying to fork while opening a
pipeline.
+=item Can't fork, trying again in 5 seconds
+
+(W pipe) A fork in a piped open failed with EAGAIN and will be retried
+after five seconds.
+
=item Can't get filespec - stale stat buffer?
(S) A warning peculiar to VMS. This arises because of the difference
you tried to jump out of a sort() block or subroutine, which is a no-no.
See L<perlfunc/goto>.
-=item Can't goto subroutine from an eval-string
+=item Can't goto subroutine from a sort sub (or similar callback)
+
+(F) The "goto subroutine" call can't be used to jump out of the
+comparison sub for a sort(), or from a similar callback (such
+as the reduce() function in List::Util).
+
+=item Can't goto subroutine from an eval-%s
(F) The "goto subroutine" call can't be used to jump out of an eval
-"string". (You can use it to jump out of an eval {BLOCK}, but you
-probably don't want to.)
+"string" or block.
=item Can't goto subroutine outside a subroutine
situation typically indicates that the parent program under which Perl
may be running (e.g. cron) is being very careless.
+=item Can't kill a non-numeric process ID
+
+(F) Process identifiers must be (signed) integers. It is a fatal error to
+attempt to kill() an undefined, empty-string or otherwise non-numeric
+process identifier.
+
=item Can't "last" outside a loop block
(F) A "last" statement was executed to break out of the current block,
inner curlies will be considered a block that loops once. See
L<perlfunc/last>.
+=item Can't linearize anonymous symbol table
+
+(F) Perl tried to calculate the method resolution order (MRO) of a
+package, but failed because the package stash has no name.
+
=item Can't load '%s' for module %s
(F) The module you tried to load failed to load a dynamic extension. This
may either mean that you upgraded your version of perl to one that is
incompatible with your old dynamic extensions (which is known to happen
between major versions of perl), or (more likely) that your dynamic
-extension was build against an older version of the library that is
+extension was built against an older version of the library that is
installed on your system. You may need to rebuild your old dynamic
extensions.
=item Can't localize lexical variable %s
(F) You used local on a variable name that was previously declared as a
-lexical variable using "my". This is not allowed. If you want to
+lexical variable using "my" or "state". This is not allowed. If you want to
localize a package variable of the same name, qualify it with the
package name.
(F) The script you specified can't be opened for the indicated reason.
+If you're debugging a script that uses #!, and normally relies on the
+shell's $PATH search, the -S option causes perl to do that search, so
+you don't have to type the path or C<`which $scriptname`>.
+
=item Can't read CRTL environ
(S) A warning peculiar to VMS. Perl tried to read an element of %ENV
or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not
searched.
-=item Can't redefine active sort subroutine %s
-
-(F) Perl optimizes the internal handling of sort subroutines and keeps
-pointers into them. You tried to redefine one such sort subroutine when
-it was currently active, which is not allowed. If you really want to do
-this, you should write C<sort { &func } @x> instead of C<sort func @x>.
-
=item Can't "redo" outside a loop block
(F) A "redo" statement was executed to restart the current block, but
(P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried
to reopen it to accept binary data. Alas, it failed.
-=item Can't resolve method `%s' overloading `%s' in package `%s'
+=item Can't resolve method "%s" overloading "%s" in package "%s"
(F|P) Error resolving overloading specified by a method name (as opposed
to a subroutine reference): no such method callable via the package. If
method name is C<???>, this is an internal error.
-=item Can't reswap uid and euid
-
-(P) The setreuid() call failed for some reason in the setuid emulator of
-suidperl.
-
=item Can't return %s from lvalue subroutine
(F) Perl detected an attempt to return illegal lvalues (such as
(P) For some reason you can't fstat() the script even though you have it
open already. Bizarre.
-=item Can't swap uid and euid
-
-(P) The setreuid() call failed for some reason in the setuid emulator of
-suidperl.
-
=item Can't take log of %g
(F) For ordinary real numbers, you can't take the logarithm of a
(F) You tried to unshift an "unreal" array that can't be unshifted, such
as the main Perl stack.
-=item Can't upgrade that kind of scalar
+=item Can't upgrade %s (%d) to %d
(P) The internal sv_upgrade routine adds "members" to an SV, making it
into a more specialized kind of SV. The top several SV types are so
specialized, however, that they cannot be interconverted. This message
indicates that such a conversion was attempted.
-=item Can't upgrade to undef
-
-(P) The undefined SV is the bottom of the totem pole, in the scheme of
-upgradability. Upgrading to undef indicates an error in the code
-calling sv_upgrade.
-
-=item Can't use '%c' in a group with different byte-order in %s
-
-(F) You attempted to force a different byte-order on a type
-that is already inside a group with a byte-order modifier.
-For example you cannot force little-endianness on a type that
-is inside a big-endian group.
-
=item Can't use anonymous symbol table for method lookup
(F) The internal routine that does method lookup was handed a symbol
(F) Only a simple scalar variable may be used as a loop variable on a
foreach.
-=item Can't use global %s in "my"
+=item Can't use global %s in "%s"
(F) You tried to declare a magical variable as a lexical variable. This
is not allowed, because the magic can be tied to only one location
have variables in your program that looked like magical variables but
weren't.
+=item Can't use '%c' in a group with different byte-order in %s
+
+(F) You attempted to force a different byte-order on a type
+that is already inside a group with a byte-order modifier.
+For example you cannot force little-endianness on a type that
+is inside a big-endian group.
+
=item Can't use "my %s" in sort comparison
(F) The global variables $a and $b are reserved for sort comparisons.
(F) The compiler tried to interpret a bracketed expression as a
subscript. But to the left of the brackets was an expression that
-didn't look like an array reference, or anything else subscriptable.
+didn't look like a hash or array reference, or anything else subscriptable.
=item Can't use \%c to mean $%c in expression
value that prints out looking like SCALAR(0xdecaf). Use the $1 form
instead.
+=item Can't use "when" outside a topicalizer
+
+(F) You have used a when() block that is neither inside a C<foreach>
+loop nor a C<given> block. (Note that this error is issued on exit
+from the C<when> block, so you won't get the error if the match fails,
+or if you use an explicit C<continue>.)
+
=item Can't weaken a nonreference
(F) You attempted to weaken something that was not a reference. Only
with an assignment operator, which implies modifying the value itself.
Perhaps you need to copy the value to a temporary, and repeat that.
-=item Character in "C" format wrapped in pack
+=item Character in 'C' format wrapped in pack
(W pack) You said
If you actually want to pack Unicode codepoints, use the C<"U"> format
instead.
-=item Character in "c" format wrapped in pack
+=item Character in 'W' format wrapped in pack
+
+(W pack) You said
+
+ pack("U0W", $x)
+
+where $x is either less than 0 or more than 255. However, C<U0>-mode expects
+all values to fall in the interval [0, 255], so Perl behaved as if you
+meant:
+
+ pack("U0W", $x & 255)
+
+=item Character in 'c' format wrapped in pack
(W pack) You said
If you actually want to pack Unicode codepoints, use the C<"U"> format
instead.
+=item Character in '%c' format wrapped in unpack
+
+(W unpack) You tried something like
+
+ unpack("H", "\x{2a1}")
+
+where the format expects to process a byte (a character with a value
+below 256), but a higher value was provided instead. Perl uses the value
+modulus 256 instead, as if you had provided:
+
+ unpack("H", "\x{a1}")
+
+=item Character(s) in '%c' format wrapped in pack
+
+(W pack) You tried something like
+
+ pack("u", "\x{1f3}b")
+
+where the format expects to process a sequence of bytes (character with a
+value below 256), but some of the characters had a higher value. Perl
+uses the character values modulus 256 instead, as if you had provided:
+
+ pack("u", "\x{f3}b")
+
+=item Character(s) in '%c' format wrapped in unpack
+
+(W unpack) You tried something like
+
+ unpack("s", "\x{1f3}b")
+
+where the format expects to process a sequence of bytes (character with a
+value below 256), but some of the characters had a higher value. Perl
+uses the character values modulus 256 instead, as if you had provided:
+
+ unpack("s", "\x{f3}b")
+
=item close() on unopened filehandle %s
(W unopened) You tried to close a filehandle that was never opened.
+=item closedir() attempted on invalid dirhandle %s
+
+(W io) The dirhandle you tried to close is either closed or not really
+a dirhandle. Check your control flow.
+
=item Code missing after '/'
(F) You had a (sub-)template that ends with a '/'. There must be another
corresponding C<overload> or C<charnames> pragma? See L<charnames> and
L<overload>.
+=item Constant(%s)%s: %s in regex; marked by <-- HERE in m/%s/
+
+(F) The parser found inconsistencies while attempting to find
+the character name specified in the C<\N{...}> escape. Perhaps you
+forgot to load the corresponding C<charnames> pragma?
+See L<charnames>.
+
+
=item Constant is not %s reference
(F) A constant value (perhaps declared using the C<use constant> pragma)
infinite recursion, unless you're writing strange benchmark programs, in
which case it indicates something else.
+This threshold can be changed from 100, by recompiling the F<perl> binary,
+setting the C pre-processor macro C<PERL_SUB_DEPTH_WARN> to the desired value.
+
=item defined(@array) is deprecated
(D deprecated) defined() is not usually useful on arrays because it
long for Perl to handle. You have to be seriously twisted to write code
that triggers this error.
+=item Deprecated character(s) in \\N{...} starting at '%s'
+
+(D deprecated) Just about anything is legal for the C<...> in C<\N{...}>.
+But starting in 5.12, non-reasonable ones that don't look like names are
+deprecated. A reasonable name begins with an alphabetic character and
+continues with any combination of alphanumerics, dashes, spaces, parentheses or
+colons.
+
+=item Deprecated use of my() in false conditional
+
+(D deprecated) You used a declaration similar to C<my $x if 0>.
+There has been a long-standing bug in Perl that causes a lexical variable
+not to be cleared at scope exit when its declaration includes a false
+conditional. Some people have exploited this bug to achieve a kind of
+static variable. Since we intend to fix this bug, we don't want people
+relying on this behavior. You can achieve a similar static effect by
+declaring the variable in a separate block outside the function, eg
+
+ sub f { my $x if 0; return $x++ }
+
+becomes
+
+ { my $x; sub f { return $x++ } }
+
+Beginning with perl 5.9.4, you can also use C<state> variables to
+have lexicals that are initialized only once (see L<feature>):
+
+ sub f { state $x; return $x++ }
+
=item DESTROY created new reference to dead object '%s'
(F) A DESTROY() method created a new reference to the object which is
=item (Did you mean &%s instead?)
-(W) You probably referred to an imported subroutine &FOO as $FOO or some
-such.
+(W misc) You probably referred to an imported subroutine &FOO as $FOO or
+some such.
=item (Did you mean "local" instead of "our"?)
(W misc) You used the obsolescent C<dump()> built-in function, without fully
qualifying it as C<CORE::dump()>. Maybe it's a typo. See L<perlfunc/dump>.
+=item dump is not supported
+
+(F) Your machine doesn't support dump/undump.
+
=item Duplicate free() ignored
(S malloc) An internal routine called free() on something that had
expression that contains the C<(?{ ... })> zero-width assertion, which
is unsafe. See L<perlre/(?{ code })>, and L<perlsec>.
-=item %s: Eval-group not allowed at run time
+=item %s: Eval-group not allowed at runtime, use re 'eval'
(F) Perl tried to compile a regular expression containing the
C<(?{ ... })> zero-width assertion at run time, as it would when the
assertion, but that construct is only allowed when the C<use re 'eval'>
pragma is in effect. See L<perlre/(?{ code })>.
+=item EVAL without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern that nested too many EVAL calls without consuming
+any text. Restructure the pattern so that text is consumed.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
=item Excessively long <> operator
(F) The contents of a <> operator may not exceed the maximum size of a
(F) The C<exec> function is not implemented in MacPerl. See L<perlport>.
-=item Execution of %s aborted due to compilation errors
+=item Execution of %s aborted due to compilation errors.
(F) The final summary message when a Perl compilation fails.
=item %s failed--call queue aborted
-(F) An untrapped exception was raised while executing a CHECK, INIT, or
-END subroutine. Processing of the remainder of the queue of such
-routines has been prematurely ended.
+(F) An untrapped exception was raised while executing a UNITCHECK,
+CHECK, INIT, or END subroutine. Processing of the remainder of the
+queue of such routines has been prematurely ended.
=item False [] range "%s" in regex; marked by <-- HERE in m/%s/
(F) Your machine apparently doesn't implement fcntl(). What is this, a
PDP-11 or something?
+=item FETCHSIZE returned a negative value
+
+(F) A tied array claimed to have a negative number of elements, which
+is not possible.
+
+=item Field too wide in 'u' format in pack
+
+(W pack) Each line in an uuencoded string start with a length indicator
+which can't encode values above 63. So there is no point in asking for
+a line length bigger than that. Perl will behave as if you specified
+C<u63> as format.
+
=item Filehandle %s opened only for input
(W io) You tried to write on a read-only filehandle. If you intended
=item Filehandle %s reopened as %s only for input
(W io) You opened for reading a filehandle that got the same filehandle id
-as STDOUT or STDERR. This occured because you closed STDOUT or STDERR
+as STDOUT or STDERR. This occurred because you closed STDOUT or STDERR
previously.
=item Filehandle STDIN reopened as %s only for output
(W io) You opened for writing a filehandle that got the same filehandle id
-as STDIN. This occured because you closed STDIN previously.
+as STDIN. This occurred because you closed STDIN previously.
=item Final $ should be \$ or $name
=item Global symbol "%s" requires explicit package name
-(F) You've said "use strict vars", which indicates that all variables
-must either be lexically scoped (using "my"), declared beforehand using
-"our", or explicitly qualified to say which package the global variable
-is in (using "::").
+(F) You've said "use strict" or "use strict vars", which indicates
+that all variables must either be lexically scoped (using "my" or "state"),
+declared beforehand using "our", or explicitly qualified to say
+which package the global variable is in (using "::").
=item glob failed (%s)
not finding it. Chances are you left some needed parentheses out
earlier in the line, and you really meant a "less than".
+=item gmtime(%.0f) too large
+
+(W overflow) You called C<gmtime> with an number that was larger than
+it can reliably handle and C<gmtime> probably returned the wrong
+date. This warning is also triggered with nan (the special
+not-a-number value).
+
+=item gmtime(%.0f) too small
+
+(W overflow) You called C<gmtime> with an number that was smaller than
+it can reliably handle and C<gmtime> probably returned the wrong
+date. This warning is also triggered with nan (the special
+not-a-number value).
+
=item Got an error from DosAllocMem
(P) An error peculiar to OS/2. Most probably you're using an obsolete
supposed to follow something: a template character or a ()-group.
See L<perlfunc/pack>.
-=item %s had compilation errors
+=item %s had compilation errors.
(F) The final summary message when a C<perl -c> fails.
names (like C<$A::B>). You've exceeded Perl's limits. Future versions
of Perl are likely to eliminate these arbitrary limitations.
+=item Ignoring zero length \N{} in character class
+
+(W) Named Unicode character escapes (\N{...}) may return a
+zero length sequence. When such an escape is used in a character class
+its behaviour is not well defined. Check that the correct escape has
+been used, and the correct charname handler is in scope.
+
=item Illegal binary digit %s
(F) You used a digit other than 0 or 1 in a binary number.
=item Illegal character in prototype for %s : %s
-(W syntax) An illegal character was found in a prototype declaration. Legal
-characters in prototypes are $, @, %, *, ;, [, ], &, and \.
+(W illegalproto) An illegal character was found in a prototype declaration.
+Legal characters in prototypes are $, @, %, *, ;, [, ], &, and \.
=item Illegal declaration of anonymous subroutine
(W digit) You may have tried to use an 8 or 9 in an octal number.
Interpretation of the octal number stopped before the 8 or 9.
-=item Illegal switch in PERL5OPT: %s
+=item Illegal switch in PERL5OPT: -%c
(X) The PERL5OPT environment variable may only be used to set the
-following switches: B<-[DIMUdmtw]>.
+following switches: B<-[CDIMUdmtw]>.
=item Ill-formed CRTL environ value "%s"
didn't see the expected delimiter between key and value, so the line was
ignored.
-=item Impossible to activate assertion call
-
-(W assertions) You're calling an assertion function in a block that is
-not under the control of the C<assertions> pragma.
-
=item (in cleanup) %s
(W misc) This prefix usually indicates that a DESTROY() method raised
Failure of user callbacks dispatched using the C<G_KEEPERR> flag could
also result in this warning. See L<perlcall/G_KEEPERR>.
+=item Inconsistent hierarchy during C3 merge of class '%s': merging failed on parent '%s'
+
+(F) The method resolution order (MRO) of the given class is not
+C3-consistent, and you have enabled the C3 MRO for this class. See the C3
+documentation in L<mro> for more information.
+
=item In EBCDIC the v-string components cannot exceed 2147483647
(F) An error peculiar to EBCDIC. Internally, v-strings are stored as
Unicode code points, and encoded in EBCDIC as UTF-EBCDIC. The UTF-EBCDIC
encoding is limited to code points no larger than 2147483647 (0x7FFFFFFF).
+=item Infinite recursion in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern that references itself without consuming any input
+text. You should check the pattern to ensure that recursive patterns
+either consume text or fail.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
+=item Initialization of state variables in list context currently forbidden
+
+(F) Currently the implementation of "state" only permits the initialization
+of scalar variables in scalar context. Re-write C<state ($a) = 42> as
+C<state $a = 42> to change from list to scalar context. Constructions such
+as C<state (@a) = foo()> will be supported in a future perl release.
+
=item Insecure dependency in %s
(F) You tried to do something that the tainting mechanism didn't like.
(F) You can't use system(), exec(), or a piped open in a setuid or
setgid script if C<$ENV{PATH}> contains a directory that is writable by
-the world. See L<perlsec>.
+the world. Also, the PATH must not contain any relative directory.
+See L<perlsec>.
=item Insecure $ENV{%s} while running %s
internally--subject to loss of precision errors in subsequent
operations.
+=item Integer overflow in format string for %s
+
+(F) The indexes and widths specified in the format string of C<printf()>
+or C<sprintf()> are too large. The numbers must not overflow the size of
+integers for your architecture.
+
=item Integer overflow in version
(F) Some portion of a version initialization is too large for the
(W printf) Perl does not understand the given format conversion. See
L<perlfunc/sprintf>.
+=item Invalid escape in the specified encoding in regex; marked by <-- HERE in m/%s/
+
+(W regexp) The numeric escape (for example C<\xHH>) of value < 256
+didn't correspond to a single character through the conversion
+from the encoding specified by the encoding pragma.
+The escape was replaced with REPLACEMENT CHARACTER (U+FFFD) instead.
+The <-- HERE shows in the regular expression about where the
+escape was discovered.
+
+=item Invalid mro name: '%s'
+
+(F) You tried to C<mro::set_mro("classname", "foo")>
+or C<use mro 'foo'>, where C<foo> is not a valid method resolution order (MRO).
+(Currently, the only valid ones are C<dfs> and C<c3>). See L<mro>.
+
=item Invalid [] range "%s" in regex; marked by <-- HERE in m/%s/
(F) The range specified in a character class had a minimum character
(W unopened) You tried ioctl() on a filehandle that was never opened.
Check you control flow and number of arguments.
-=item IO layers (like "%s") unavailable
+=item IO layers (like '%s') unavailable
(F) Your Perl has not been configured to have PerlIO, and therefore
you cannot use IO layers. To have PerlIO Perl must be configured
=item $* is no longer supported
-(D deprecated) The special variable C<$*>, deprecated in older perls, has
-been removed as of 5.9.0 and is no longer supported. You should use the
-C<//m> and C<//s> regexp modifiers instead.
+(D deprecated, syntax) The special variable C<$*>, deprecated in older perls, has
+been removed as of 5.9.0 and is no longer supported. In previous versions of perl the use of
+C<$*> enabled or disabled multi-line matching within a string.
+
+Instead of using C<$*> you should use the C</m> (and maybe C</s>) regexp
+modifiers. (In older versions: when C<$*> was set to a true value then all regular
+expressions behaved as if they were written using C</m>.)
+
+=item $# is no longer supported
+
+(D deprecated, syntax) The special variable C<$#>, deprecated in older perls, has
+been removed as of 5.9.3 and is no longer supported. You should use the
+printf/sprintf functions instead.
=item `%s' is not a code reference
=item length/code after end of string in unpack
-(F) While unpacking, the string buffer was alread used up when an unpack
+(F) While unpacking, the string buffer was already used up when an unpack
length/code combination tried to obtain more data. This results in
an undefined value for the length. See L<perlfunc/pack>.
+=item Lexing code attempted to stuff non-Latin-1 character into Latin-1 input
+
+(F) An extension is attempting to insert text into the current parse
+(using L<lex_stuff_pvn_flags|perlapi/lex_stuff_pvn_flags> or similar), but
+tried to insert a character that couldn't be part of the current input.
+This is an inherent pitfall of the stuffing mechanism, and one of the
+reasons to avoid it. Where it is necessary to stuff, stuffing only
+plain ASCII is recommended.
+
+=item Lexing code internal error (%s)
+
+(F) Lexing code supplied by an extension violated the lexer's API in a
+detectable way.
+
=item listen() on closed socket %s
(W closed) You tried to do a listen on a closed socket. Did you forget
to check the return value of your socket() call? See
L<perlfunc/listen>.
-=item Lookbehind longer than %d not implemented in regex; marked by <-- HERE in m/%s/
+=item localtime(%.0f) too large
+
+(W overflow) You called C<localtime> with an number that was larger
+than it can reliably handle and C<localtime> probably returned the
+wrong date. This warning is also triggered with nan (the special
+not-a-number value).
+
+=item localtime(%.0f) too small
+
+(W overflow) You called C<localtime> with an number that was smaller
+than it can reliably handle and C<localtime> probably returned the
+wrong date. This warning is also triggered with nan (the special
+not-a-number value).
+
+=item Lookbehind longer than %d not implemented in regex m/%s/
(F) There is currently a limit on the length of string which lookbehind can
-handle. This restriction may be eased in a future release. The <-- HERE
-shows in the regular expression about where the problem was discovered.
+handle. This restriction may be eased in a future release.
+
+=item Lost precision when %s %f by 1
+
+(W) The value you attempted to increment or decrement by one is too large
+for the underlying floating point representation to store accurately,
+hence the target of C<++> or C<--> is unchanged. Perl issues this warning
+because it has already switched from integers to floating point when values
+are too large for integers, and now even floating point is insufficient.
+You may wish to switch to using L<Math::BigInt> explicitly.
=item lstat() on filehandle %s
by that? lstat() makes sense only on filenames. (Perl did a fstat()
instead on the filehandle.)
+=item lvalue attribute ignored after the subroutine has been defined
+
+(W misc) Making a subroutine an lvalue subroutine after it has been defined
+by declaring the subroutine with a lvalue attribute is not
+possible. To make the the subroutine a lvalue subroutine add the
+lvalue attribute to the definition, or put the the declaration before
+the definition.
+
=item Lvalue subs returning %s not implemented yet
(F) Due to limitations in the current implementation, array and hash
=item Malformed UTF-8 character (%s)
-Perl detected something that didn't comply with UTF-8 encoding rules.
+(S utf8) (F) Perl detected a string that didn't comply with UTF-8
+encoding rules, even though it had the UTF8 flag on.
-One possible cause is that you read in data that you thought to be in
-UTF-8 but it wasn't (it was for example legacy 8-bit data). Another
-possibility is careless use of utf8::upgrade().
+One possible cause is that you set the UTF8 flag yourself for data that
+you thought to be in UTF-8 but it wasn't (it was for example legacy
+8-bit data). To guard against this, you can use Encode::decode_utf8.
+
+If you use the C<:encoding(UTF-8)> PerlIO layer for input, invalid byte
+sequences are handled gracefully, but if you use C<:utf8>, the flag is
+set without validating the data, possibly resulting in this error
+message.
+
+See also L<Encode/"Handling Malformed Data">.
=item Malformed UTF-16 surrogate
-Perl thought it was reading UTF-16 encoded character data but while
+(F) Perl thought it was reading UTF-16 encoded character data but while
doing it Perl met a malformed Unicode surrogate.
+=item Malformed UTF-8 returned by \N
+
+(F) The charnames handler returned malformed UTF-8.
+
+=item Malformed UTF-8 string in pack
+
+(F) You tried to pack something that didn't comply with UTF-8 encoding
+rules and perl was unable to guess how to make more progress.
+
+=item Malformed UTF-8 string in unpack
+
+(F) You tried to unpack something that didn't comply with UTF-8 encoding
+rules and perl was unable to guess how to make more progress.
+
+=item Malformed UTF-8 string in '%c' format in unpack
+
+(F) You tried to unpack something that didn't comply with UTF-8 encoding
+rules and perl was unable to guess how to make more progress.
+
+=item Maximal count of pending signals (%d) exceeded
+
+(F) Perl aborted due to a too high number of signals pending. This
+usually indicates that your operating system tried to deliver signals
+too fast (with a very high priority), starving the perl process from
+resources it would need to reach a point where it can process signals
+safely. (See L<perlipc/"Deferred Signals (Safe Signals)">.)
+
=item %s matches null string many times in regex; marked by <-- HERE in m/%s/
(W regexp) The pattern you've specified would be an infinite loop if the
(W syntax) An underscore (underbar) in a numeric constant did not
separate two digits.
-=item Missing %sbrace%s on \N{}
+=item Missing argument in %s
+
+(W uninitialized) A printf-type format required more arguments than were
+supplied.
+
+=item Missing argument to -%c
+
+(F) The argument to the indicated command line switch must follow
+immediately after the switch, without intervening spaces.
+
+=item Missing braces on \N{}
(F) Wrong syntax of character name literal C<\N{charname}> within
-double-quotish context.
+double-quotish context. This can also happen when there is a space (or
+comment) between the C<\N> and the C<{> in a regex with the C</x> modifier.
+This modifier does not change the requirement that the brace immediately follow
+the C<\N>.
=item Missing comma after first argument to %s function
=item Missing right brace on %s
-(F) Missing right brace in C<\p{...}> or C<\P{...}>.
+(F) Missing right brace in C<\x{...}>, C<\p{...}>, C<\P{...}>, or C<\N{...}>.
+
+=item Missing right brace on \\N{} or unescaped left brace after \\N
+
+(F)
+C<\N> has two meanings.
+
+The traditional one has it followed by a name enclosed
+in braces, meaning the character (or sequence of characters) given by that name.
+Thus C<\N{ASTERISK}> is another way of writing C<*>, valid in both
+double-quoted strings and regular expression patterns. In patterns, it doesn't
+have the meaning an unescaped C<*> does.
+
+Starting in Perl 5.12.0, C<\N> also can have an additional meaning (only) in
+patterns, namely to match a non-newline character. (This is short for
+C<[^\n]>, and like C<.> but is not affected by the C</s> regex modifier.)
+
+This can lead to some ambiguities. When C<\N> is not followed immediately by a
+left brace, Perl assumes the C<[^\n]> meaning. Also, if
+the braces form a valid quantifier such as C<\N{3}> or C<\N{5,}>, Perl assumes
+that this means to match the given quantity of non-newlines (in these examples,
+3; and 5 or more, respectively). In all other case, where there is a C<\N{>
+and a matching C<}>, Perl assumes that a character name is desired.
+
+However, if there is no matching C<}>, Perl doesn't know if it was mistakenly
+omitted, or if C<[^\n]{> was desired, and
+raises this error. If you meant the former, add the right brace; if you meant
+the latter, escape the brace with a backslash, like so: C<\N\{>
=item Missing right curly or square bracket
you omitted the name of the module. Consult L<perlrun> for full details
about C<-M> and C<-m>.
-=item More than one argument to open
+=item More than one argument to '%s' open
(F) The C<open> function has been asked to open multiple files. This
can happen if you are trying to open a pipe to a command that takes a
(W syntax) Multidimensional arrays aren't written like C<$foo[1,2,3]>.
They're written like C<$foo[1][2][3]>, as in C.
-=item '/' must be followed by 'a*', 'A*' or 'Z*'
-
-(F) You had a pack template indicating a counted-length string,
-Currently the only things that can have their length counted are a*, A*
-or Z*. See L<perlfunc/pack>.
-
=item '/' must follow a numeric type in unpack
(F) You had an unpack template that contained a '/', but this did not
(F) Lexically scoped subroutines are not yet implemented. Don't try
that yet.
-=item "my" variable %s can't be in a package
+=item "%s" variable %s can't be in a package
(F) Lexically scoped variables aren't in a package, so it doesn't make
sense to try to declare one with a package qualifier on the front. Use
local() if you want to localize a package variable.
+=item \\N in a character class must be a named character: \\N{...}
+
+(F) The new (5.12) meaning of C<\N> as C<[^\n]> is not valid in a bracketed
+character class, for the same reason that C<.> in a character class loses its
+specialness: it matches almost everything, which is probably not what you want.
+
+=item \\N{NAME} must be resolved by the lexer
+
+(F) When compiling a regex pattern, an unresolved named character or sequence
+was encountered. This can happen in any of several ways that bypass the lexer,
+such as using single-quotish context, or an extra backslash in double quotish:
+
+ $re = '\N{SPACE}'; # Wrong!
+ $re = "\\N{SPACE}"; # Wrong!
+ /$re/;
+
+Instead, use double-quotes with a single backslash:
+
+ $re = "\N{SPACE}"; # ok
+ /$re/;
+
+The lexer can be bypassed as well by creating the pattern from smaller
+components:
+
+ $re = '\N';
+ /${re}{SPACE}/; # Wrong!
+
+It's not a good idea to split a construct in the middle like this, and it
+doesn't work here. Instead use the solution above.
+
+Finally, the message also can happen under the C</x> regex modifier when the
+C<\N> is separated by spaces from the C<{>, in which case, remove the spaces.
+
+ /\N {SPACE}/x; # Wrong!
+ /\N{SPACE}/x; # ok
+
=item Name "%s::%s" used only once: possible typo
(W once) Typographical errors often show up as unique variable names.
the same; if a program uses $c only once but also uses any of the others it
will not trigger this warning.
+=item Invalid hexadecimal number in \\N{U+...}
+
+(F) The character constant represented by C<...> is not a valid hexadecimal
+number. Either it is empty, or you tried to use a character other than 0 - 9
+or A - F, a - f in a hexadecimal number.
+
=item Negative '/' count in unpack
(F) The length count obtained from a length/code unpack operation was
(S internal) The symbol in question was declared but somehow went out of
scope before it could possibly have been used.
-=item Newline in left-justified string for %s
-
-(W printf) There is a newline in a string to be left justified by
-C<printf> or C<sprintf>.
+=item next::method/next::can/maybe::next::method cannot find enclosing method
-The padding spaces will appear after the newline, which is probably not
-what you wanted. Usually you should remove the newline from the string
-and put formatting characters in the C<sprintf> format.
+(F) C<next::method> needs to be called within the context of a
+real method in a real package, and it could not find such a context.
+See L<mro>.
=item No %s allowed while running setuid
=item No DB::DB routine defined
(F) The currently executing code was compiled with the B<-d> switch, but
-for some reason the perl5db.pl file (or some facsimile thereof) didn't
-define a routine to be called at the beginning of each statement. Which
-is odd, because the file should have been required automatically, and
-should have blown up the require if it didn't parse right.
+for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::>
+module) didn't define a routine to be called at the beginning of each
+statement.
=item No dbm on this machine
(P) This is counted as an internal error, because every machine should
supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>.
-=item No DBsub routine
+=item No DB::sub routine defined
-(F) The currently executing code was compiled with the B<-d> switch,
-but for some reason the perl5db.pl file (or some facsimile thereof)
-didn't define a DB::sub routine to be called at the beginning of each
-ordinary subroutine call.
+(F) The currently executing code was compiled with the B<-d> switch, but
+for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::>
+module) didn't define a C<DB::sub> routine to be called at the beginning
+of each ordinary subroutine call.
=item No B<-e> allowed in setuid scripts
(F) The setuid emulator requires that scripts have a well-formed #! line
even on machines that don't support the #! construct.
+=item No next::method '%s' found for %s
+
+(F) C<next::method> found no further instances of this method name
+in the remaining packages of the MRO of this class. If you don't want
+it throwing an exception, use C<maybe::next::method>
+or C<next::can>. See L<mro>.
+
=item "no" not allowed in expression
(F) The "no" keyword is recognized and executed at compile time, and
(F) Configure didn't find anything resembling the setreuid() call for
your system.
-=item No space allowed after -%c
-
-(F) The argument to the indicated command line switch must follow
-immediately after the switch, without intervening spaces.
-
=item No %s specified for -%c
(F) The indicated command line switch needs a mandatory argument, but
you haven't specified one.
+=item No such class field "%s" in variable %s of type %s
+
+(F) You tried to access a key from a hash through the indicated typed variable
+but that key is not allowed by the package of the same type. The indicated
+package has restricted the set of allowed keys using the L<fields> pragma.
+
=item No such class %s
-(F) You provided a class qualifier in a "my" or "our" declaration, but
+(F) You provided a class qualifier in a "my", "our" or "state" declaration, but
this class doesn't exist at this point in your program.
+=item No such hook: %s
+
+(F) You specified a signal hook that was not recognized by Perl. Currently, Perl
+accepts C<__DIE__> and C<__WARN__> as valid signal hooks
+
=item No such pipe open
(P) An error peculiar to VMS. The internal routine my_pclose() tried to
F<SYS$TIMEZONE_DIFFERENTIAL> to translate to the number of seconds which
need to be added to UTC to get local time.
+=item Non-string passed as bitmask
+
+(W misc) A number has been passed as a bitmask argument to select().
+Use the vec() function to construct the file descriptor bitmasks for
+select. See L<perlfunc/select>
+
=item Null filename used
(F) You can't require the null filename, especially because on many
=item Offset outside string
-(F) You tried to do a read/write/send/recv operation with an offset
-pointing outside the buffer. This is difficult to imagine. The sole
-exception to this is that C<sysread()>ing past the buffer will extend
-the buffer and zero pad the new area.
+(F, W layer) You tried to do a read/write/send/recv/seek operation
+with an offset pointing outside the buffer. This is difficult to
+imagine. The sole exceptions to this are that zero padding will
+take place when going past the end of the string when either
+C<sysread()>ing a file, or when seeking past the end of a scalar opened
+for I/O (in anticipation of future reads and to imitate the behaviour
+with real files).
=item %s() on unopened %s
(S internal) An internal warning that the grammar is screwed up.
-=item Operation `%s': no method found, %s
+=item Opening dirhandle %s also as a file
+
+(W io deprecated) You used open() to associate a filehandle to
+a symbol (glob or scalar) that already holds a dirhandle.
+Although legal, this idiom might render your code confusing
+and is deprecated.
+
+=item Opening filehandle %s also as a directory
+
+(W io deprecated) You used opendir() to associate a dirhandle to
+a symbol (glob or scalar) that already holds a filehandle.
+Although legal, this idiom might render your code confusing
+and is deprecated.
+
+=item Operation "%s": no method found, %s
(F) An attempt was made to perform an overloaded operation for which no
handler was defined. While some handlers can be autogenerated in terms
the current limits and change them, and in ksh/bash/zsh use C<ulimit -a>
and C<ulimit -d n>, respectively.
+=item Out of memory during %s extend
+
+(X) An attempt was made to extend an array, a list, or a string beyond
+the largest possible memory allocation.
+
=item Out of memory during "large" request for %s
(F) The malloc() function returned 0, indicating there was insufficient
the request was judged large enough (compile-time default is 64K), so a
possibility to shut down by trapping this error is granted.
-=item Out of memory during %s extend
-
-(X) An attempt was made to extend an array, a list, or a string beyond
-the largest possible memory allocation.
-
=item Out of memory during request for %s
(X|F) The malloc() function returned 0, indicating there was
parsing, but realloc() wouldn't give it more memory, virtual or
otherwise.
+=item '.' outside of string in pack
+
+(F) The argument to a '.' in your template tried to move the working
+position to before the start of the packed string being built.
+
=item '@' outside of string in unpack
(F) You had a template that specified an absolute position outside
the string being unpacked. See L<perlfunc/pack>.
+=item '@' outside of string with malformed UTF-8 in unpack
+
+(F) You had a template that specified an absolute position outside
+the string being unpacked. The string being unpacked was also invalid
+UTF-8. See L<perlfunc/pack>.
+
+=item Overloaded dereference did not return a reference
+
+(F) An object with an overloaded dereference operator was dereferenced,
+but the overloaded operation did not return a reference. See
+L<overload>.
+
+=item Overloaded qr did not return a REGEXP
+
+(F) An object with a C<qr> overload was used as part of a match, but the
+overloaded operation didn't return a compiled regexp. See L<overload>.
+
=item %s package attribute may clash with future reserved word: %s
(W reserved) A lowercase attribute name was used that had a
(P) An internal error.
+=item panic: attempt to call %s in %s
+
+(P) One of the file test operators entered a code branch that calls
+an ACL related-function, but that function is not available on this
+platform. Earlier checks mean that it should not be possible to
+enter this branch on this platform.
+
=item panic: ck_grep
(P) Failed an internal consistency check trying to compile a grep.
(P) The internal do_trans routines were called with invalid operational
data.
+=item panic: fold_constants JMPENV_PUSH returned %d
+
+(P) While attempting folding constants an exception other than an C<eval>
+failure was caught.
+
=item panic: frexp
(P) The library function frexp() failed, making printf("%f") impossible.
(P) We popped the context stack to a context with the specified label,
and then discovered it wasn't a context we know how to do a goto in.
+=item panic: hfreeentries failed to free hash
+
+(P) The internal routine used to clear a hashes entries tried repeatedly,
+but each time something added more entries to the hash. Most likely the hash
+contains an object with a reference back to the hash and a destructor that
+adds a new object to the hash.
+
=item panic: INTERPCASEMOD
(P) The lexer got into a bad state at a case modifier.
(P) Something requested a negative number of bytes of malloc.
-=item panic: mapstart
-
-(P) The compiler is screwed up with respect to the map() function.
-
=item panic: memory wrap
(P) Something tried to allocate more memory than possible.
-=item panic: null array
-
-(P) One of the internal array routines was passed a null AV pointer.
-
=item panic: pad_alloc
(P) The compiler got confused about which scratch pad it was allocating
(P) scan_num() got called on something that wasn't a number.
+=item panic: sv_chop %s
+
+(P) The sv_chop() routine was passed a position that is not within the
+scalar's string buffer.
+
=item panic: sv_insert
(P) The sv_insert() routine was told to remove more string than there
(P) The compiler attempted to do a goto, or something weird like that.
+=item panic: unimplemented op %s (#%d) called
+
+(P) The compiler is screwed up and attempted to use an op that isn't permitted
+at run time.
+
=item panic: utf16_to_utf8: odd bytelen
(P) Something tried to call utf16_to_utf8 with an odd (as opposed
to even) byte length.
+=item panic: utf16_to_utf8_reversed: odd bytelen
+
+(P) Something tried to call utf16_to_utf8_reversed with an odd (as opposed
+to even) byte length.
+
=item panic: yylex
(P) The lexer got into a bad state while processing a case modifier.
+=item Pattern subroutine nesting without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern that uses too many nested subpattern calls without
+consuming any text. Restructure the pattern so text is consumed before the
+nesting limit is exceeded.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
=item Parentheses missing around "%s" list
(W parenthesis) You said something like
my ($foo, $bar) = @_;
-Remember that "my", "our", and "local" bind tighter than comma.
+Remember that "my", "our", "local" and "state" bind tighter than comma.
=item C<-p> destination: %s
"Can't locate object method \"%s\" via package \"%s\"". It often means
that a method requires a package that has not been loaded.
-=item Perl %s required--this is only version %s, stopped
-
-(F) The module in question uses features of a version of Perl more
-recent than the currently running version. How long has it been since
-you upgraded, anyway? See L<perlfunc/require>.
-
=item Perl_my_%s() not available
(F) Your platform has very uncommon byte-order and integer size,
conversion functions. This is only a problem when you're using the
'<' or '>' modifiers in (un)pack templates. See L<perlfunc/pack>.
+=item Perl_pmflag() is deprecated, and will be removed from the XS API
+
+(D deprecated) XS code called the C function C<Perl_pmflag>. This was part of
+Perl's listed public API for extending or embedding the perl interpreter. It has
+now been removed from the public API, and will be removed in a future release,
+hence XS code should be re-written not to use it.
+
+=item Perl %s required--this is only version %s, stopped
+
+(F) The module in question uses features of a version of Perl more
+recent than the currently running version. How long has it been since
+you upgraded, anyway? See L<perlfunc/require>.
+
=item PERL_SH_DIR too long
(F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the
you run Perl. How to really fix the problem can be found in
L<perllocale> section B<LOCALE PROBLEMS>.
-=item Permission denied
-
-(F) The setuid emulator in suidperl decided you were up to no good.
-
=item pid %x not a child
(W exec) A warning peculiar to VMS. Waitpid() was asked to wait for a
(F) The unpack format P must have an explicit size, not "*".
-=item B<-P> not allowed for setuid/setgid script
-
-(F) The script would have to be opened by the C preprocessor by name,
-which provides a race condition that breaks security.
-
=item POSIX class [:%s:] unknown in regex; marked by <-- HERE in m/%s/
(F) The class in the character class [: :] syntax is unknown. The <-- HERE
literal @foo, then write it as \@foo; otherwise find out what happened
to the array you apparently lost track of.
-=item Possible Y2K bug: %s
-
-(W y2k) You are concatenating the number 19 with another number, which
-could be a potential Year 2000 problem.
+=item Possible unintended interpolation of $\ in regex
-=item pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead
+(W ambiguous) You said something like C<m/$\/> in a regex.
+The regex C<m/foo$\s+bar/m> translates to: match the word 'foo', the output
+record separator (see L<perlvar/$\>) and the letter 's' (one time or more)
+followed by the word 'bar'.
-(D deprecated) You have written something like this:
-
- sub doit
- {
- use attrs qw(locked);
- }
+If this is what you intended then you can silence the warning by using
+C<m/${\}/> (for example: C<m/foo${\}s+bar/>).
-You should use the new declaration syntax instead.
-
- sub doit : locked
- {
- ...
-
-The C<use attrs> pragma is now obsolete, and is only provided for
-backward-compatibility. See L<perlsub/"Subroutine Attributes">.
+If instead you intended to match the word 'foo' at the end of the line
+followed by whitespace and the word 'bar' on the next line then you can use
+C<m/$(?)\/> (for example: C<m/foo$(?)\s+bar/>).
=item Precedence problem: open %s should be open(%s)
L<perlipc/"Signals">. See also "Process terminated by SIGTERM/SIGINT"
in L<perlos2>.
+=item Prototype after '%c' for %s : %s
+
+(W illegalproto) A character follows % or @ in a prototype. This is useless,
+since % and @ gobble the rest of the subroutine arguments.
+
=item Prototype mismatch: %s vs %s
(S prototype) The subroutine being declared or defined had previously been
One possible workaround is to force Perl to use magical string increment
by prepending "0" to your numbers.
+=item readdir() attempted on invalid dirhandle %s
+
+(W io) The dirhandle you're reading from is either closed or not really
+a dirhandle. Check your control flow.
+
=item readline() on closed filehandle %s
(W closed) The filehandle you're reading from got itself closed sometime
=item Recursive inheritance detected in package '%s'
-(F) More than 100 levels of inheritance were used. Probably indicates
-an unintended loop in your inheritance hierarchy.
+(F) While calculating the method resolution order (MRO) of a package, Perl
+believes it found an infinite loop in the C<@ISA> hierarchy. This is a
+crude check that bails out after 100 levels of C<@ISA> depth.
=item Recursive inheritance detected while looking for method %s
(W internal) The internal sv_replace() function was handed a new SV with
a reference count of other than 1.
+=item Reference to invalid group 0
+
+(F) You used C<\g0> or similar in a regular expression. You may refer to
+capturing parentheses only with strictly positive integers (normal
+backreferences) or with strictly negative integers (relative
+backreferences), but using 0 does not make sense.
+
=item Reference to nonexistent group in regex; marked by <-- HERE in m/%s/
(F) You used something like C<\7> in your regular expression, but there are
The <-- HERE shows in the regular expression about where the problem was
discovered.
+=item Reference to nonexistent or unclosed group in regex; marked by <-- HERE in m/%s/
+
+(F) You used something like C<\g{-7}> in your regular expression, but there are
+not at least seven sets of closed capturing parentheses in the expression before
+where the C<\g{-7}> was located.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
+=item Reference to nonexistent named group in regex; marked by <-- HERE in m/%s/
+
+(F) You used something like C<\k'NAME'> or C<< \k<NAME> >> in your regular
+expression, but there is no corresponding named capturing parentheses such
+as C<(?'NAME'...)> or C<(?<NAME>...). Check if the name has been spelled
+correctly both in the backreference and the declaration.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
+=item (?(DEFINE)....) does not allow branches in regex; marked by <-- HERE in m/%s/
+
+(F) You used something like C<(?(DEFINE)...|..)> which is illegal. The
+most likely cause of this error is that you left out a parenthesis inside
+of the C<....> part.
+
+The <-- HERE shows in the regular expression about where the problem was
+discovered.
+
=item regexp memory corruption
(P) The regular expression engine got confused by what the regular
=item Repeated format line will never terminate (~~ and @# incompatible)
-(F) Your format containes the ~~ repeat-until-blank sequence and a
+(F) Your format contains the ~~ repeat-until-blank sequence and a
numeric field that will never go blank so that the repetition never
terminates. You might use ^# instead. See L<perlform>.
+=item Replacement list is longer than search list
+
+(W misc) You have used a replacement list that is longer than the
+search list. So the additional elements in the replacement list
+are meaningless.
+
=item Reversed %s= operator
(W syntax) You wrote your assignment operator backwards. The = must
always comes last, to avoid ambiguity with subsequent unary operators.
-=item Runaway format
+=item rewinddir() attempted on invalid dirhandle %s
-(F) Your format contained the ~~ repeat-until-blank sequence, but it
-produced 200 lines at once, and the 200th line looked exactly like the
-199th line. Apparently you didn't arrange for the arguments to exhaust
-themselves, either by using ^ instead of @ (for scalar variables), or by
-shifting or popping (for array variables). See L<perlform>.
+(W io) The dirhandle you tried to do a rewinddir() on is either closed or not
+really a dirhandle. Check your control flow.
=item Scalars leaked: %d
not magically convert between scalars and lists for you. See
L<perlref>.
-=item Script is not setuid/setgid in suidperl
-
-(F) Oddly, the suidperl program was invoked on a script without a setuid
-or setgid bit set. This doesn't make much sense.
-
=item Search pattern not terminated
(F) The lexer couldn't find the final delimiter of a // or m{}
in Perl 5.9.0 or later that uses the // as the I<defined-or> can be
misparsed by pre-5.9.0 Perls as a non-terminated search pattern.
+=item Search pattern not terminated or ternary operator parsed as search pattern
+
+(F) The lexer couldn't find the final delimiter of a C<?PATTERN?>
+construct.
+
+The question mark is also used as part of the ternary operator (as in
+C<foo ? 0 : 1>) leading to some ambiguous constructions being wrongly
+parsed. One way to disambiguate the parsing is to put parentheses around
+the conditional expression, i.e. C<(foo) ? 0 : 1>.
+
=item %sseek() on unopened filehandle
(W unopened) You tried to use the seek() or sysseek() function on a
filehandle that was either never opened or has since been closed.
+=item seekdir() attempted on invalid dirhandle %s
+
+(W io) The dirhandle you are doing a seekdir() on is either closed or not
+really a dirhandle. Check your control flow.
+
=item select not implemented
(F) This machine doesn't implement the select() system call.
<-- HERE shows in the regular expression about where the problem was
discovered. See L<perlre>.
+=item Sequence \\%s... not terminated in regex; marked by <-- HERE in m/%s/
+
+(F) The regular expression expects a mandatory argument following the escape
+sequence and this has been omitted or incorrectly written.
+
=item Sequence (?#... not terminated in regex; marked by <-- HERE in m/%s/
(F) A regular expression comment must be terminated by a closing
(F) The setuid emulator won't run a script that is writable by the
world, because the world might have written on it already.
+=item Setuid script not plain file
+
+(F) The setuid emulator won't run a script that isn't read from a file,
+but from a socket, a pipe or another device.
+
=item shm%s not implemented
(F) You don't have System V shared memory IPC on your system.
(W signal) The signal handler named in %SIG doesn't, in fact, exist.
Perhaps you put it into the wrong package?
+=item Smart matching a non-overloaded object breaks encapsulation
+
+(F) You should not use the C<~~> operator on an object that does not
+overload it: Perl refuses to use the object's underlying structure for
+the smart match.
+
=item sort is now a reserved word
(F) An ancient error message that almost nobody ever runs into anymore.
But before sort was a keyword, people sometimes used it as a filehandle.
-=item Sort subroutine didn't return a numeric value
-
-(F) A sort comparison routine must return a number. You probably blew
-it by not using C<< <=> >> or C<cmp>, or by not using them correctly.
-See L<perlfunc/sort>.
-
=item Sort subroutine didn't return single value
(F) A sort comparison subroutine may not return a list value with more
(W unopened) You tried to use the stat() function on a filehandle that
was either never opened or has since been closed.
-=item Stub found while resolving method `%s' overloading %s
+=item Stub found while resolving method "%s" overloading "%s" in package "%s"
(P) Overloading resolution over @ISA tree may be broken by importation
stubs. Stubs should never be implicitly created, but explicit calls to
(P) The substitution was looping infinitely. (Obviously, a substitution
shouldn't iterate more times than there are characters of input, which
is what happened.) See the discussion of substitution in
-L<perlop/"Quote and Quote-like Operators">.
+L<perlop/"Regexp Quote-Like Operators">.
=item Substitution pattern not terminated
substr is used in an lvalue context (as the left hand side of an
assignment or as a subroutine argument for example).
-=item suidperl is no longer needed since %s
+=item sv_upgrade from type %d down to type %d
-(F) Your Perl was compiled with B<-D>SETUID_SCRIPTS_ARE_SECURE_NOW, but
-a version of the setuid emulator somehow got run anyway.
+(P) Perl tried to force the upgrade an SV to a type which was actually
+inferior to its current type.
=item Switch (?(condition)... contains too many branches in regex; marked by <-- HERE in m/%s/
(W unopened) You tried to use the tell() function on a filehandle that
was either never opened or has since been closed.
+=item telldir() attempted on invalid dirhandle %s
+
+(W io) The dirhandle you tried to telldir() is either closed or not really
+a dirhandle. Check your control flow.
+
=item That use of $[ is unsupported
(F) Assignment to C<$[> is now strictly circumscribed, and interpreted
=item The 'unique' attribute may only be applied to 'our' variables
-(F) Currently this attribute is not supported on C<my> or C<sub>
-declarations. See L<perlfunc/our>.
+(F) This attribute was never supported on C<my> or C<sub> declarations.
=item This Perl can't reset CRTL environ elements (%s)
=item thread failed to start: %s
-(F) The entry point function of threads->create() failed for some reason.
+(W threads)(S) The entry point function of threads->create() failed for some reason.
=item times not implemented
(F) Your version of the C library apparently doesn't do times(). I
suspect you're not running on Unix.
+=item "-T" is on the #! line, it must also be used on the command line
+
+(X) The #! line (or local equivalent) in a Perl script contains the
+B<-T> option (or the B<-t> option), but Perl was not invoked with B<-T> in its command line.
+This is an error because, by the time Perl discovers a B<-T> in a
+script, it's too late to properly taint everything from the environment.
+So Perl gives up.
+
+If the Perl script is being executed as a command using the #!
+mechanism (or its local equivalent), this error can usually be fixed by
+editing the #! line so that the B<-%c> option is a part of Perl's first
+argument: e.g. change C<perl -n -%c> to C<perl -%c -n>.
+
+If the Perl script is being executed as C<perl scriptname>, then the
+B<-%c> option must appear on the command line: C<perl -%c scriptname>.
+
=item To%s: illegal mapping '%s'
(F) You tried to define a customized To-mapping for lc(), lcfirst,
=item Too deeply nested ()-groups
-(F) Your template contains ()-groups with a ridiculously deep nesting level.
+(F) Your template contains ()-groups with a ridiculously deep nesting level.
=item Too few args to syscall
=item Too late for "-%s" option
(X) The #! line (or local equivalent) in a Perl script contains the
-B<-M> or B<-m> option. This is an error because B<-M> and B<-m> options
-are not intended for use inside scripts. Use the C<use> pragma instead.
+B<-M>, B<-m> or B<-C> option.
-=item Too late for "B<-T>" option
+In the case of B<-M> and B<-m>, this is an error because those options are
+not intended for use inside scripts. Use the C<use> pragma instead.
-(X) The #! line (or local equivalent) in a Perl script contains the
-B<-T> option, but Perl was not invoked with B<-T> in its command line.
-This is an error because, by the time Perl discovers a B<-T> in a
-script, it's too late to properly taint everything from the environment.
-So Perl gives up.
-
-If the Perl script is being executed as a command using the #!
-mechanism (or its local equivalent), this error can usually be fixed by
-editing the #! line so that the B<-T> option is a part of Perl's first
-argument: e.g. change C<perl -n -T> to C<perl -T -n>.
-
-If the Perl script is being executed as C<perl scriptname>, then the
-B<-T> option must appear on the command line: C<perl -T scriptname>.
+The B<-C> option only works if it is specified on the command line as well
+(with the same sequence of letters or numbers following). Either specify
+this option on the command line, or, if your system supports it, make your
+script executable and run it directly instead of passing it to perl.
=item Too late to run %s block
(F) The unexec() routine failed for some reason. See your local FSF
representative, who probably put it there in the first place.
-=item Unicode character %s is illegal
+=item Unicode non-character %s is illegal for interchange
-(W utf8) Certain Unicode characters have been designated off-limits by
-the Unicode standard and should not be generated. If you really know
-what you are doing you can turn off this warning by C<no warnings 'utf8';>.
+(W utf8) Certain codepoints, such as U+FFFE and U+FFFF, are defined by the
+Unicode standard to be non-characters. Those are legal codepoints, but are
+reserved for internal use; so, applications shouldn't attempt to exchange
+them. In some cases, this message is also given if you use a codepoint that
+isn't in Unicode--that is it is above the legal maximum of U+10FFFF. These
+aren't legal at all in Unicode, so they are illegal for interchange, but can be
+used internally in a Perl program. If you know what you are doing you can turn
+off this warning by C<no warnings 'utf8';>.
=item Unknown BYTEORDER
Note that if you want to enable a warnings category registered by a module
(e.g. C<use warnings 'File::Find'>), you must have imported this module
+
+=item Unknown verb pattern '%s' in regex; marked by <-- HERE in m/%s/
+
+(F) You either made a typo or have incorrectly put a C<*> quantifier
+after an open brace in your pattern. Check the pattern and review
+L<perlre> for details on legal verb patterns.
+
first.
=item unmatched [ in regex; marked by <-- HERE in m/%s/
somehow, or insert an underbar into it. You might also declare it as a
subroutine.
-=item Unrecognized character %s
+=item Unrecognized character %s; marked by <-- HERE after %s near column %d
(F) The Perl parser has no idea what to do with the specified character
-in your Perl script (or eval). Perhaps you tried to run a compressed
-script, a binary program, or a directory as a Perl program.
+in your Perl script (or eval) near the specified column. Perhaps you tried
+to run a compressed script, a binary program, or a directory as a Perl program.
-=item /%s/: Unrecognized escape \\%c in character class passed through
+=item Unrecognized escape \\%c in character class passed through in regex; marked by <-- HERE in m/%s/
(W regexp) You used a backslash-character combination which is not
recognized by Perl inside character classes. The character was
-understood literally.
+understood literally, but this may change in a future version of Perl.
+The <-- HERE shows in the regular expression about where the
+escape was discovered.
=item Unrecognized escape \\%c passed through
(W misc) You used a backslash-character combination which is not
-recognized by Perl.
+recognized by Perl. The character was understood literally, but this may
+change in a future version of Perl.
=item Unrecognized escape \\%c passed through in regex; marked by <-- HERE in m/%s/
(W regexp) You used a backslash-character combination which is not
-recognized by Perl. This combination appears in an interpolated variable or
-a C<'>-delimited regular expression. The character was understood
-literally. The <-- HERE shows in the regular expression about where the
+recognized by Perl. The character was understood literally, but this may
+change in a future version of Perl.
+The <-- HERE shows in the regular expression about where the
escape was discovered.
=item Unrecognized signal name "%s"
compressed integer format and could not be converted to an integer.
See L<perlfunc/pack>.
+=item Unterminated verb pattern in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern of the form C<(*VERB)> but did not terminate
+the pattern with a C<)>. Fix the pattern and retry.
+
+=item Unterminated verb pattern argument in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern of the form C<(*VERB:ARG)> but did not terminate
+the pattern with a C<)>. Fix the pattern and retry.
+
+=item Unterminated \g{...} pattern in regex; marked by <-- HERE in m/%s/
+
+(F) You missed a close brace on a \g{..} pattern (group reference) in
+a regular expression. Fix the pattern and retry.
+
=item Unterminated <> operator
(F) The lexer saw a left angle bracket in a place where it was expecting
The <-- HERE shows in the regular expression about
where the problem was discovered. See L<perlre>.
+=item Useless use of /d modifier in transliteration operator
+
+(W misc) You have used the /d modifier where the searchlist has the
+same length as the replacelist. See L<perlop> for more information
+about the /d modifier.
+
=item Useless use of %s in void context
(W void) You did something without a side effect in a context that does
This warning will not be issued for numerical constants equal to 0 or 1
since they are often used in statements like
- 1 while sub_with_side_effects() ;
+ 1 while sub_with_side_effects();
String constants that would normally evaluate to 0 or 1 are warned
about.
(F) The "use" keyword is recognized and executed at compile time, and
returns no useful value. See L<perlmod>.
+=item Use of assignment to $[ is deprecated
+
+(D deprecated) The C<$[> variable (index of the first element in an array)
+is deprecated. See L<perlvar/"$[">.
+
=item Use of bare << to mean <<"" is deprecated
-(D deprecated) You are now encouraged to use the explicitly quoted form
-if you wish to use an empty line as the terminator of the here-document.
+(D deprecated) You are now encouraged to use the explicitly quoted
+form if you wish to use an empty line as the terminator of the here-document.
+
+=item Use of comma-less variable list is deprecated
+
+(D deprecated) The values you give to a format should be
+separated by commas, not just aligned on a line.
=item Use of chdir('') or chdir(undef) as chdir() deprecated
use the /g modifier. Currently, /c is meaningful only when /g is
used. (This may change in the future.)
+=item Use of := for an empty attribute list is deprecated
+
+(D deprecated) The construction C<my $x := 42> currently
+parses correctly in perl, being equivalent to C<my $x : = 42>
+(applying an empty attribute list to C<$x>). This useless
+construct is now deprecated, so C<:=> can be reclaimed as a new
+operator in the future.
+
=item Use of freed value in iteration
(F) Perhaps you modified the iterated array within the loop?
operator. Since C<split> always tries to match the pattern
repeatedly, the C</g> has no effect.
-=item Use of implicit split to @_ is deprecated
+=item Use of "goto" to jump into a construct is deprecated
-(D deprecated) It makes a lot of work for the compiler when you clobber
-a subroutine's argument list, so it's better if you assign the results
-of a split() explicitly to an array (or list).
+(D deprecated) Using C<goto> to jump from an outer scope into an inner
+scope is deprecated and should be avoided.
=item Use of inherited AUTOLOAD for non-method %s() is deprecated
you should remove AutoLoader from @ISA and change C<use AutoLoader;> to
C<use AutoLoader 'AUTOLOAD';>.
+=item Use of octal value above 377 is deprecated
+
+(D deprecated, W regexp) There is a constant in the regular expression whose
+value is interpeted by Perl as octal and larger than 377 (255 decimal, 0xFF
+hex). Perl may take this to mean different things depending on the rest of
+the regular expression. If you meant such an octal value, convert it to
+hexadecimal and use C<\xHH> or C<\x{HH}> instead. If you meant to have
+part of it mean a backreference, use C<\g> for that. See L<perlre>.
+
=item Use of %s in printf format not supported
(F) You attempted to use a feature of printf that is accessible from
only C. This usually means there's a better way to do it in Perl.
-=item Use of $# is deprecated
-
-(D deprecated) This was an ill-advised attempt to emulate a poorly
-defined B<awk> feature. Use an explicit printf() or sprintf() instead.
-
=item Use of %s is deprecated
(D deprecated) The construct indicated is no longer recommended for use,
it already went past any symlink you are presumably trying to look for.
The operation returned C<undef>. Use a filename instead.
-=item Deprecated use of my() in false conditional
-
-(D deprecated) You used a declaration similar to C<my $x if 0>.
-There has been a long-standing bug in Perl that causes a lexical variable
-not to be cleared at scope exit when its declaration includes a false
-conditional. Some people have exploited this bug to achieve a kind of
-static variable. Since we intend to fix this bug, we don't want people
-relying on this behavior. You can achieve a similar static effect by
-declaring the variable in a separate block outside the function, eg
-
- sub f { my $x if 0; return $x++ }
-
-becomes
-
- { my $x; sub f { return $x++ } }
-
=item Use of "package" with no arguments is deprecated
(D deprecated) You used the C<package> keyword without specifying a package
If you really do mean it, explicitly numify your reference, like so:
C<$array[0+$ref]>. This warning is not given for overloaded objects,
either, because you can overload the numification and stringification
-operators and then you assumedly know what you are doing.
+operators and then you assumably know what you are doing.
=item Use of reserved word "%s" is deprecated
allow this syntax, but shouldn't have. It is now deprecated, and will be
removed in a future version.
+=item Using just the first character returned by \N{} in character class
+
+(W) A charnames handler may return a sequence of more than one character.
+Currently all but the first one are discarded when used in a regular
+expression pattern bracketed character class.
+
+=item Using just the first characters returned by \N{}
+
+(W) A charnames handler may return a sequence of characters. There is a finite
+limit as to the number of characters that can be used, which this sequence
+exceeded. In the message, the characters in the sequence are separated by
+dots, and each is shown by its ordinal in hex. Anything to the left of the
+C<HERE> was retained; anything to the right was discarded.
+
=item UTF-16 surrogate %s
-(W utf8) You tried to generate half of an UTF-16 surrogate by
+(W utf8) You tried to generate half of a UTF-16 surrogate by
requesting a Unicode character between the code points 0xD800 and
0xDFFF (inclusive). That range is reserved exclusively for the use of
UTF-16 encoding (by having two 16-bit UCS-2 characters); but Perl
encodes its characters in UTF-8, so what you got is a very illegal
-character. If you really know what you are doing you can turn off
+character. If you really really know what you are doing you can turn off
this warning by C<no warnings 'utf8';>.
=item Value of %s can be "0"; test with defined()
=item Variable "%s" is not imported%s
-(F) While "use strict" in effect, you referred to a global variable that
-you apparently thought was imported from another module, because
+(W misc) With "use strict" in effect, you referred to a global variable
+that you apparently thought was imported from another module, because
something else of the same name (usually a subroutine) is exported by
that module. It usually means you put the wrong funny character on the
front of your variable.
-=item Variable length lookbehind not implemented in regex; marked by <-- HERE in m/%s/
+=item Variable length lookbehind not implemented in m/%s/
(F) Lookbehind is allowed only for subexpressions whose length is fixed and
-known at compile time. The <-- HERE shows in the regular expression about
-where the problem was discovered. See L<perlre>.
+known at compile time. See L<perlre>.
=item "%s" variable %s masks earlier declaration in same %s
-(W misc) A "my" or "our" variable has been redeclared in the current
+(W misc) A "my", "our" or "state" variable has been redeclared in the current
scope or statement, effectively eliminating all access to the previous
instance. This is almost always a typographical error. Note that the
earlier variable will still exist until the end of the scope or until
reference variables in outer subroutines are created, they
are automatically rebound to the current values of such variables.
+=item Verb pattern '%s' has a mandatory argument in regex; marked by <-- HERE in m/%s/
+
+(F) You used a verb pattern that requires an argument. Supply an argument
+or check that you are using the right verb.
+
+=item Verb pattern '%s' may not have an argument in regex; marked by <-- HERE in m/%s/
+
+(F) You used a verb pattern that is not allowed an argument. Remove the
+argument or check that you are using the right verb.
+
=item Version number must be a constant number
(P) The attempt to translate a C<use Module n.n LIST> statement into
its equivalent C<BEGIN> block found an internal inconsistency with
the version number.
-=item v-string in use/require is non-portable
+=item Version string '%s' contains invalid data; ignoring: '%s'
-(W portable) The use of v-strings is non-portable to older, pre-5.6, Perls.
-If you want your scripts to be backward portable, use the floating
-point version number: for example, instead of C<use 5.6.1> say
-C<use 5.006_001>. This of course won't help: the older Perls
-won't suddenly start understanding newer features, but at least
-they will show a sensible error message indicating the required
-minimum version.
+(W misc) The version string contains invalid characters at the end, which
+are being ignored.
=item Warning: something's wrong
(W) You passed warn() an empty string (the equivalent of C<warn "">) or
-you called it with no args and C<$_> was empty.
+you called it with no args and C<$@> was empty.
=item Warning: unable to close filehandle %s properly
=item Wide character in %s
-(W utf8) Perl met a wide character (>255) when it wasn't expecting
+(S utf8) Perl met a wide character (>255) when it wasn't expecting
one. This warning is by default on for I/O (like print). The easiest
way to quiet this warning is simply to add the C<:utf8> layer to the
output, e.g. C<binmode STDOUT, ':utf8'>. Another way to turn off the
(F) You had a pack template that specified a relative position after
the end of the string being unpacked. See L<perlfunc/pack>.
-=item Xsub "%s" called in sort
-
-(F) The use of an external subroutine as a sort comparison is not yet
-supported.
-
-=item Xsub called in sort
-
-(F) The use of an external subroutine as a sort comparison is not yet
-supported.
-
=item YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET!
(F) And you probably never will, because you probably don't have the
=back
+=head1 SEE ALSO
+
+L<warnings>, L<perllexwarn>.
+
=cut
projects / p5sagit/p5-mst-13.2.git / blobdiff