you tried to jump out of a sort() block or subroutine, which is a no-no.
See L<perlfunc/goto>.
-=item Can't goto subroutine from an eval-string
+=item Can't goto subroutine from an eval-%s
(F) The "goto subroutine" call can't be used to jump out of an eval
-"string". (You can use it to jump out of an eval {BLOCK}, but you
-probably don't want to.)
+"string" or block.
=item Can't goto subroutine outside a subroutine
with an assignment operator, which implies modifying the value itself.
Perhaps you need to copy the value to a temporary, and repeat that.
-=item Character in "C" format wrapped in pack
+=item Character in 'C' format wrapped in pack
(W pack) You said
If you actually want to pack Unicode codepoints, use the C<"U"> format
instead.
-=item Character in "c" format wrapped in pack
+=item Character in 'W' format wrapped in pack
+
+(W pack) You said
+
+ pack("U0W", $x)
+
+where $x is either less than 0 or more than 255. However, C<U0>-mode expects
+all values to fall in the interval [0, 255], so Perl behaved as if you
+meant:
+
+ pack("U0W", $x & 255)
+
+=item Character in 'c' format wrapped in pack
(W pack) You said
If you actually want to pack Unicode codepoints, use the C<"U"> format
instead.
+=item Character in '%c' format wrapped in unpack
+
+(W unpack) You tried something like
+
+ unpack("H", "\x{2a1}")
+
+where the format expects to process a byte (a character with a value
+below 256), but a higher value was provided instead. Perl uses the value
+modulus 256 instead, as if you had provided:
+
+ unpack("H", "\x{a1}")
+
+=item Character(s) in '%c' format wrapped in pack
+
+(W pack) You tried something like
+
+ pack("u", "\x{1f3}b")
+
+where the format expects to process a sequence of bytes (character with a
+value below 256), but some of the characters had a higher value. Perl
+uses the character values modulus 256 instead, as if you had provided:
+
+ pack("u", "\x{f3}b")
+
+=item Character(s) in '%c' format wrapped in unpack
+
+(W unpack) You tried something like
+
+ unpack("s", "\x{1f3}b")
+
+where the format expects to process a sequence of bytes (character with a
+value below 256), but some of the characters had a higher value. Perl
+uses the character values modulus 256 instead, as if you had provided:
+
+ unpack("s", "\x{f3}b")
+
=item close() on unopened filehandle %s
(W unopened) You tried to close a filehandle that was never opened.
(F) Your machine apparently doesn't implement fcntl(). What is this, a
PDP-11 or something?
+=item Field too wide in 'u' format in pack
+
+(W pack) Each line in an uuencoded string start with a length indicator
+which can't encode values above 63. So there is no point in asking for
+a line length bigger than that. Perl will behave as if you specified
+C<u63> as format.
+
=item Filehandle %s opened only for input
(W io) You tried to write on a read-only filehandle. If you intended
(F) You can't use system(), exec(), or a piped open in a setuid or
setgid script if C<$ENV{PATH}> contains a directory that is writable by
-the world. See L<perlsec>.
+the world. Also, the PATH must not contain any relative directory.
+See L<perlsec>.
=item Insecure $ENV{%s} while running %s
=item Malformed UTF-8 character (%s)
-Perl detected something that didn't comply with UTF-8 encoding rules.
+(W utf8) Perl detected something that didn't comply with UTF-8 encoding rules.
One possible cause is that you read in data that you thought to be in
UTF-8 but it wasn't (it was for example legacy 8-bit data). Another
Perl thought it was reading UTF-16 encoded character data but while
doing it Perl met a malformed Unicode surrogate.
+=item Malformed UTF-8 string in pack
+
+(F) You tried to pack something that didn't comply with UTF-8 encoding
+rules and perl was unable to guess how to make more progress.
+
+=item Malformed UTF-8 string in unpack
+
+(F) You tried to unpack something that didn't comply with UTF-8 encoding
+rules and perl was unable to guess how to make more progress.
+
+=item Malformed UTF-8 string in '%c' format in unpack
+
+(F) You tried to unpack something that didn't comply with UTF-8 encoding
+rules and perl was unable to guess how to make more progress.
+
=item %s matches null string many times in regex; marked by <-- HERE in m/%s/
(W regexp) The pattern you've specified would be an infinite loop if the
(W syntax) An underscore (underbar) in a numeric constant did not
separate two digits.
+=item Missing argument to -%c
+
+(F) The argument to the indicated command line switch must follow
+immediately after the switch, without intervening spaces.
+
=item Missing %sbrace%s on \N{}
(F) Wrong syntax of character name literal C<\N{charname}> within
(W syntax) Multidimensional arrays aren't written like C<$foo[1,2,3]>.
They're written like C<$foo[1][2][3]>, as in C.
-=item '/' must be followed by 'a*', 'A*' or 'Z*'
-
-(F) You had a pack template indicating a counted-length string,
-Currently the only things that can have their length counted are a*, A*
-or Z*. See L<perlfunc/pack>.
-
=item '/' must follow a numeric type in unpack
(F) You had an unpack template that contained a '/', but this did not
=item No DB::DB routine defined
(F) The currently executing code was compiled with the B<-d> switch, but
-for some reason the perl5db.pl file (or some facsimile thereof) didn't
-define a routine to be called at the beginning of each statement. Which
-is odd, because the file should have been required automatically, and
-should have blown up the require if it didn't parse right.
+for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::>
+module) didn't define a routine to be called at the beginning of each
+statement.
=item No dbm on this machine
(P) This is counted as an internal error, because every machine should
supply dbm nowadays, because Perl comes with SDBM. See L<SDBM_File>.
-=item No DBsub routine
+=item No DB::sub routine defined
-(F) The currently executing code was compiled with the B<-d> switch,
-but for some reason the perl5db.pl file (or some facsimile thereof)
-didn't define a DB::sub routine to be called at the beginning of each
-ordinary subroutine call.
+(F) The currently executing code was compiled with the B<-d> switch, but
+for some reason the current debugger (e.g. F<perl5db.pl> or a C<Devel::>
+module) didn't define a C<DB::sub> routine to be called at the beginning
+of each ordinary subroutine call.
=item No B<-e> allowed in setuid scripts
(F) Configure didn't find anything resembling the setreuid() call for
your system.
-=item No space allowed after -%c
-
-(F) The argument to the indicated command line switch must follow
-immediately after the switch, without intervening spaces.
-
=item No %s specified for -%c
(F) The indicated command line switch needs a mandatory argument, but
you haven't specified one.
+=item No such class field "%s" in variable %s of type %s
+
+(F) You tried to access a key from a hash through the indicated typed variable
+but that key is not allowed by the package of the same type. The indicated
+package has restricted the set of allowed keys using the L<fields> pragma.
+
=item No such class %s
(F) You provided a class qualifier in a "my" or "our" declaration, but
(S internal) An internal warning that the grammar is screwed up.
-=item Operation `%s': no method found, %s
+=item Operation "%s": no method found, %s
(F) An attempt was made to perform an overloaded operation for which no
handler was defined. While some handlers can be autogenerated in terms
parsing, but realloc() wouldn't give it more memory, virtual or
otherwise.
+=item '.' outside of string in pack
+
+(F) The argument to a '.' in your template tried to move the working
+position to before the start of the packed string being built.
+
=item '@' outside of string in unpack
(F) You had a template that specified an absolute position outside
the string being unpacked. See L<perlfunc/pack>.
+=item '@' outside of string with malformed UTF-8 in unpack
+
+(F) You had a template that specified an absolute position outside
+the string being unpacked. The string being unpacked was also invalid
+UTF-8. See L<perlfunc/pack>.
+
=item %s package attribute may clash with future reserved word: %s
(W reserved) A lowercase attribute name was used that had a
literal @foo, then write it as \@foo; otherwise find out what happened
to the array you apparently lost track of.
-=item Possible Y2K bug: %s
-
-(W y2k) You are concatenating the number 19 with another number, which
-could be a potential Year 2000 problem.
-
=item pragma "attrs" is deprecated, use "sub NAME : ATTRS" instead
(D deprecated) You have written something like this:
(F) The setuid emulator won't run a script that is writable by the
world, because the world might have written on it already.
+=item Setuid script not plain file
+
+(F) The setuid emulator won't run a script that isn't read from a file,
+but from a socket, a pipe or another device.
+
=item shm%s not implemented
(F) You don't have System V shared memory IPC on your system.
(W unopened) You tried to use the stat() function on a filehandle that
was either never opened or has since been closed.
-=item Stub found while resolving method `%s' overloading %s
+=item Stub found while resolving method "%s" overloading "%s"
(P) Overloading resolution over @ISA tree may be broken by importation
stubs. Stubs should never be implicitly created, but explicit calls to
=item Too late for "-%s" option
(X) The #! line (or local equivalent) in a Perl script contains the
-B<-M> or B<-m> option. This is an error because B<-M> and B<-m> options
+B<-M>, B<-m> or B<-C> option. This is an error because those options
are not intended for use inside scripts. Use the C<use> pragma instead.
=item Too late to run %s block
projects / p5sagit/p5-mst-13.2.git / blobdiff