(X) You can't allocate more than 64K on an MS-DOS machine.
-=item '!' allowed only after types %s
+=item '%c' allowed only after types %s
-(F) The '!' is allowed in pack() or unpack() only after certain types.
-See L<perlfunc/pack>.
+(F) The modifiers '!', '<' and '>' are allowed in pack() or unpack() only
+after certain types. See L<perlfunc/pack>.
=item Ambiguous call resolved as CORE::%s(), qualify as such or use &
that expected a numeric value instead. If you're fortunate the message
will identify which operator was so unfortunate.
+=item Argument list not closed for PerlIO layer "%s"
+
+(W layer) When pushing a layer with arguments onto the Perl I/O system you
+forgot the ) that closes the argument list. (Layers take care of transforming
+data between external and internal representations.) Perl stopped parsing
+the layer list at this point and did not attempt to push this layer.
+If your program didn't explicitly request the failing operation, it may be
+the result of the value of the environment variable PERLIO.
+
=item Array @%s missing the @ in argument %d of %s()
(D deprecated) Really old Perl let you omit the @ on array names in some
point. For example, it'd be kind of silly to put a B<-x> on the #!
line.
+=item Can't %s %s-endian %ss on this platform
+
+(F) Your platform's byte-order is neither big-endian nor little-endian,
+or it has a very strange pointer size. Packing and unpacking big- or
+little-endian floating point values and pointers may not be possible.
+See L<perlfunc/pack>.
+
=item Can't exec "%s": %s
(W exec) A system(), exec(), or piped open call could not execute the
inner curlies will be considered a block that loops once. See
L<perlfunc/last>.
+=item Can't load '%s' for module %s
+
+(F) The module you tried to load failed to load a dynamic extension. This
+may either mean that you upgraded your version of perl to one that is
+incompatible with your old dynamic extensions (which is known to happen
+between major versions of perl), or (more likely) that your dynamic
+extension was built against an older version of the library that is
+installed on your system. You may need to rebuild your old dynamic
+extensions.
+
=item Can't localize lexical variable %s
(F) You used local on a variable name that was previously declared as a
are a misprint in a function/method name or a failure to C<AutoSplit>
the file, say, by doing C<make install>.
+=item Can't locate loadable object for module %s in @INC
+
+(F) The module you loaded is trying to load an external library, like
+for example, C<foo.so> or C<bar.dll>, but the L<DynaLoader> module was
+unable to locate this library. See L<DynaLoader>.
+
=item Can't locate object method "%s" via package "%s"
(F) You called a method correctly, and it correctly indicated a package
(F) The script you specified can't be opened for the indicated reason.
-=item Can't provide tied hash usage; use keys(%hash) to test if empty
-
-(F) When a hash is evaluated in scalar context, bucket usage is
-returned if the hash is populated, and false is returned if the hash
-is empty. Bucket usage is not currently available for tied hashes.
-To test if a hash is empty or populated, use keys(%hash) in scalar
-context instead.
+If you're debugging a script that uses #!, and normally relies on the
+shell's $PATH search, the -S option causes perl to do that search, so
+you don't have to type the path or C<`which $scriptname`>.
=item Can't read CRTL environ
Errno.pm module. The Errno module is expected to tie the %! hash to
provide symbolic names for C<$!> errno values.
+=item Can't use both '<' and '>' after type '%c' in %s
+
+(F) A type cannot be forced to have both big-endian and little-endian
+byte-order at the same time, so this combination of modifiers is not
+allowed. See L<perlfunc/pack>.
+
=item Can't use %s for loop variable
(F) Only a simple scalar variable may be used as a loop variable on a
have variables in your program that looked like magical variables but
weren't.
+=item Can't use '%c' in a group with different byte-order in %s
+
+(F) You attempted to force a different byte-order on a type
+that is already inside a group with a byte-order modifier.
+For example you cannot force little-endianness on a type that
+is inside a big-endian group.
+
=item Can't use "my %s" in sort comparison
(F) The global variables $a and $b are reserved for sort comparisons.
long for Perl to handle. You have to be seriously twisted to write code
that triggers this error.
+=item Deprecated use of my() in false conditional
+
+(D deprecated) You used a declaration similar to C<my $x if 0>.
+There has been a long-standing bug in Perl that causes a lexical variable
+not to be cleared at scope exit when its declaration includes a false
+conditional. Some people have exploited this bug to achieve a kind of
+static variable. Since we intend to fix this bug, we don't want people
+relying on this behavior. You can achieve a similar static effect by
+declaring the variable in a separate block outside the function, eg
+
+ sub f { my $x if 0; return $x++ }
+
+becomes
+
+ { my $x; sub f { return $x++ } }
+
+=item DESTROY created new reference to dead object '%s'
+
+(F) A DESTROY() method created a new reference to the object which is
+just being DESTROYed. Perl is confused, and prefers to abort rather than
+to create a dangling reference.
+
=item Did not produce a valid header
See Server error.
=item (Do you need to predeclare %s?)
-(S) This is an educated guess made in conjunction with the message "%s
-found where operator expected". It often means a subroutine or module
+(S syntax) This is an educated guess made in conjunction with the message
+"%s found where operator expected". It often means a subroutine or module
name is being referenced that hasn't been declared yet. This may be
because of ordering problems in your file, or because of a missing
"sub", "package", "require", or "use" statement. If you're referencing
(S malloc) An internal routine called free() on something that had
already been freed.
+=item Duplicate modifier '%c' after '%c' in %s
+
+(W) You have applied the same modifier more than once after a type
+in a pack template. See L<perlfunc/pack>.
+
=item elseif should be elsif
-(S) There is no keyword "elseif" in Perl because Larry thinks it's ugly.
-Your code will be interpreted as an attempt to call a method named
+(S syntax) There is no keyword "elseif" in Perl because Larry thinks it's
+ugly. Your code will be interpreted as an attempt to call a method named
"elseif" for the class returned by the following block. This is
unlikely to be what you want.
(F) While under the C<use filetest> pragma, switching the real and
effective uids or gids failed.
+=item %ENV is aliased to %s
+
+(F) You're running under taint mode, and the C<%ENV> variable has been
+aliased to another hash, so it doesn't reflect anymore the state of the
+program's environment. This is potentially insecure.
+
=item Error converting file specification %s
(F) An error peculiar to VMS. Because Perl may have to deal with file
=item %s found where operator expected
-(S) The Perl lexer knows whether to expect a term or an operator. If it
-sees what it knows to be a term when it was expecting to see an
+(S syntax) The Perl lexer knows whether to expect a term or an operator.
+If it sees what it knows to be a term when it was expecting to see an
operator, it gives you this warning. Usually it indicates that an
operator or delimiter was omitted, such as a semicolon.
to have existed already, but for some reason it didn't, and had to be
created on an emergency basis to prevent a core dump.
-=item $* is no longer supported
-
-(D deprecated) The special variable C<$*>, deprecated in older perls, has
-been removed as of 5.9.0 and is no longer supported. You should use the
-C<//m> and C<//s> regexp modifiers instead.
-
=item Hash %%s missing the % in argument %d of %s()
(D deprecated) Really old Perl let you omit the % on hash names in some
(F) When using the C<sub> keyword to construct an anonymous subroutine,
you must always specify a block of code. See L<perlsub>.
+=item Illegal declaration of subroutine %s
+
+(F) A subroutine was not declared correctly. See L<perlsub>.
+
=item Illegal division by zero
(F) You tried to divide a number by 0. Either something was wrong in
parenthesised parameter list, perhaps that list was terminated too soon.
See L<attributes>.
+=item Invalid separator character %s in PerlIO layer specification %s
+
+(W layer) When pushing layers onto the Perl I/O system, something other than a
+colon or whitespace was seen between the elements of a layer list.
+If the previous attribute had a parenthesised parameter list, perhaps that
+list was terminated too soon.
+
=item Invalid type '%s' in %s
(F) The given character is not a valid pack or unpack type.
(W unopened) You tried ioctl() on a filehandle that was never opened.
Check you control flow and number of arguments.
+=item IO layers (like "%s") unavailable
+
+(F) Your Perl has not been configured to have PerlIO, and therefore
+you cannot use IO layers. To have PerlIO Perl must be configured
+with 'useperlio'.
+
=item IO::Socket::atmark not implemented on this architecture
(F) Your machine doesn't implement the sockatmark() functionality,
neither as a system call or an ioctl call (SIOCATMARK).
+=item $* is no longer supported
+
+(D deprecated) The special variable C<$*>, deprecated in older perls, has
+been removed as of 5.9.0 and is no longer supported. You should use the
+C<//m> and C<//s> regexp modifiers instead.
+
=item `%s' is not a code reference
(W overload) The second (fourth, sixth, ...) argument of overload::constant
=item (Missing operator before %s?)
-(S) This is an educated guess made in conjunction with the message "%s
-found where operator expected". Often the missing operator is a comma.
+(S syntax) This is an educated guess made in conjunction with the message
+"%s found where operator expected". Often the missing operator is a comma.
=item Missing right brace on %s
=item (Missing semicolon on previous line?)
-(S) This is an educated guess made in conjunction with the message "%s
-found where operator expected". Don't automatically put a semicolon on
+(S syntax) This is an educated guess made in conjunction with the message
+"%s found where operator expected". Don't automatically put a semicolon on
the previous line just because you saw this message.
=item Modification of a read-only value attempted
(S internal) The symbol in question was declared but somehow went out of
scope before it could possibly have been used.
-=item Newline in left-justified string for %s
-
-(W printf) There is a newline in a string to be left justified by
-C<printf> or C<sprintf>.
-
-The padding spaces will appear after the newline, which is probably not
-what you wanted. Usually you should remove the newline from the string
-and put formatting characters in the C<sprintf> format.
-
=item No %s allowed while running setuid
(F) Certain operations are deemed to be too insecure for a setuid or
the current limits and change them, and in ksh/bash/zsh use C<ulimit -a>
and C<ulimit -d n>, respectively.
+=item Out of memory during %s extend
+
+(X) An attempt was made to extend an array, a list, or a string beyond
+the largest possible memory allocation.
+
=item Out of memory during "large" request for %s
(F) The malloc() function returned 0, indicating there was insufficient
(P) The compiler is screwed up with respect to the map() function.
+=item panic: memory wrap
+
+(P) Something tried to allocate more memory than possible.
+
=item panic: null array
(P) One of the internal array routines was passed a null AV pointer.
"Can't locate object method \"%s\" via package \"%s\"". It often means
that a method requires a package that has not been loaded.
-=item perlio: argument list not closed for layer "%s"
-
-(W layer) When pushing a layer with arguments onto the Perl I/O system you
-forgot the ) that closes the argument list. (Layers take care of transforming
-data between external and internal representations.) Perl stopped parsing
-the layer list at this point and did not attempt to push this layer.
-If your program didn't explicitly request the failing operation, it may be
-the result of the value of the environment variable PERLIO.
+=item Perl_my_%s() not available
-=item perlio: invalid separator character %s in layer specification list %s
-
-(W layer) When pushing layers onto the Perl I/O system, something other than a
-colon or whitespace was seen between the elements of a layer list.
-If the previous attribute had a parenthesised parameter list, perhaps that
-list was terminated too soon.
-
-=item perlio: unknown layer "%s"
-
-(W layer) An attempt was made to push an unknown layer onto the Perl I/O
-system. (Layers take care of transforming data between external and
-internal representations.) Note that some layers, such as C<mmap>,
-are not supported in all environments. If your program didn't
-explicitly request the failing operation, it may be the result of the
-value of the environment variable PERLIO.
+(F) Your platform has very uncommon byte-order and integer size,
+so it was not possible to set up some or all fixed-width byte-order
+conversion functions. This is only a problem when you're using the
+'<' or '>' modifiers in (un)pack templates. See L<perlfunc/pack>.
=item Perl %s required--this is only version %s, stopped
(P) A "can't happen" error, because safemalloc() should have caught it
earlier.
+=item Repeated format line will never terminate (~~ and @# incompatible)
+
+(F) Your format containes the ~~ repeat-until-blank sequence and a
+numeric field that will never go blank so that the repetition never
+terminates. You might use ^# instead. See L<perlform>.
+
=item Reversed %s= operator
(W syntax) You wrote your assignment operator backwards. The = must
(F) You don't have System V shared memory IPC on your system.
+=item !=~ should be !~
+
+(W syntax) The non-matching operator is !~, not !=~. !=~ will be
+interpreted as the != (numeric not equal) and ~ (1's complement)
+operators: probably not what you intended.
+
=item <> should be quotes
(F) You wrote C<< require <file> >> when you should have written
past the symlink to get to the real file. Use an actual filename
instead.
+=item The 'unique' attribute may only be applied to 'our' variables
+
+(F) Currently this attribute is not supported on C<my> or C<sub>
+declarations. See L<perlfunc/our>.
+
=item This Perl can't reset CRTL environ elements (%s)
=item This Perl can't set CRTL environ elements (%s=%s)
(F) The entry point function of threads->create() failed for some reason.
-=item Tied variable freed while still in use
-
-(F) An access method for a tied variable (e.g. FETCH) did something to
-free the variable. Since continuing the current operation is likely
-to result in a coredump, Perl is bailing out instead.
-
=item times not implemented
(F) Your version of the C library apparently doesn't do times(). I
suspect you're not running on Unix.
+=item "-T" is on the #! line, it must also be used on the command line
+
+(X) The #! line (or local equivalent) in a Perl script contains the
+B<-T> option, but Perl was not invoked with B<-T> in its command line.
+This is an error because, by the time Perl discovers a B<-T> in a
+script, it's too late to properly taint everything from the environment.
+So Perl gives up.
+
+If the Perl script is being executed as a command using the #!
+mechanism (or its local equivalent), this error can usually be fixed by
+editing the #! line so that the B<-T> option is a part of Perl's first
+argument: e.g. change C<perl -n -T> to C<perl -T -n>.
+
+If the Perl script is being executed as C<perl scriptname>, then the
+B<-T> option must appear on the command line: C<perl -T scriptname>.
+
=item To%s: illegal mapping '%s'
(F) You tried to define a customized To-mapping for lc(), lcfirst,
B<-M> or B<-m> option. This is an error because B<-M> and B<-m> options
are not intended for use inside scripts. Use the C<use> pragma instead.
-=item Too late for "B<-T>" option
-
-(X) The #! line (or local equivalent) in a Perl script contains the
-B<-T> option, but Perl was not invoked with B<-T> in its command line.
-This is an error because, by the time Perl discovers a B<-T> in a
-script, it's too late to properly taint everything from the environment.
-So Perl gives up.
-
-If the Perl script is being executed as a command using the #!
-mechanism (or its local equivalent), this error can usually be fixed by
-editing the #! line so that the B<-T> option is a part of Perl's first
-argument: e.g. change C<perl -n -T> to C<perl -T -n>.
-
-If the Perl script is being executed as C<perl scriptname>, then the
-B<-T> option must appear on the command line: C<perl -T scriptname>.
-
=item Too late to run %s block
(W void) A CHECK or INIT block is being defined during run time proper,
=item Transliteration replacement not terminated
-(F) The lexer couldn't find the final delimiter of a tr/// or tr[][]
-construct.
+(F) The lexer couldn't find the final delimiter of a tr///, tr[][],
+y/// or y[][] construct.
=item '%s' trapped by operation mask
of valid modes: C<< < >>, C<< > >>, C<<< >> >>>, C<< +< >>,
C<< +> >>, C<<< +>> >>>, C<-|>, C<|->, C<< <& >>, C<< >& >>.
+=item Unknown PerlIO layer "%s"
+
+(W layer) An attempt was made to push an unknown layer onto the Perl I/O
+system. (Layers take care of transforming data between external and
+internal representations.) Note that some layers, such as C<mmap>,
+are not supported in all environments. If your program didn't
+explicitly request the failing operation, it may be the result of the
+value of the environment variable PERLIO.
+
=item Unknown process %x sent message to prime_env_iter: %s
(P) An error peculiar to VMS. Perl was reading values for %ENV before
of Perl executables, some of which may support fork, some not. Try
changing the name you call Perl by to C<perl_>, C<perl__>, and so on.
-=item Unsupported script encoding
+=item Unsupported script encoding %s
(F) Your program file begins with a Unicode Byte Order Mark (BOM) which
-declares it to be in a Unicode encoding that Perl cannot yet read.
+declares it to be in a Unicode encoding that Perl cannot read.
=item Unsupported socket function "%s" called
The <-- HERE shows in the regular expression about
where the problem was discovered. See L<perlre>.
+=item Useless localization of %s
+
+(W syntax) The localization of lvalues such as C<local($x=10)> is
+legal, but in fact the local() currently has no effect. This may change at
+some point in the future, but in the meantime such code is discouraged.
+
=item Useless (?%s) - use /%s modifier in regex; marked by <-- HERE in m/%s/
(W regexp) You have used an internal modifier such as (?o) that has no
The <-- HERE shows in the regular expression about
where the problem was discovered. See L<perlre>.
-=item Useless localization of %s
-
-(W syntax) The localization of lvalues such as C<local($x=10)> is
-legal, but in fact the local() currently has no effect. This may change at
-some point in the future, but in the meantime such code is discouraged.
-
=item Useless use of %s in void context
(W void) You did something without a side effect in a context that does
use the /g modifier. Currently, /c is meaningful only when /g is
used. (This may change in the future.)
-=item Use of freed value in iteration (perhaps you modified the iterated array within the loop?)
+=item Use of freed value in iteration
-(F) This is typically caused by code like the following:
+(F) Perhaps you modified the iterated array within the loop?
+This error is typically caused by code like the following:
@a = (3,4);
@a = () for (1,2,@a);
defined. It was interpreted as a "" or a 0, but maybe it was a mistake.
To suppress this warning assign a defined value to your variables.
-To help you figure out what was undefined, perl tells you what operation
-you used the undefined value in. Note, however, that perl optimizes your
-program and the operation displayed in the warning may not necessarily
-appear literally in your program. For example, C<"that $foo"> is
-usually optimized into C<"that " . $foo>, and the warning will refer to
-the C<concatenation (.)> operator, even though there is no C<.> in your
-program.
+To help you figure out what was undefined, perl will try to tell you the
+name of the variable (if any) that was undefined. In some cases it cannot
+do this, so it also tells you what operation you used the undefined value
+in. Note, however, that perl optimizes your program and the operation
+displayed in the warning may not necessarily appear literally in your
+program. For example, C<"that $foo"> is usually optimized into C<"that "
+. $foo>, and the warning will refer to the C<concatenation (.)> operator,
+even though there is no C<.> in your program.
=item Using a hash as a reference is deprecated
longer than 1024 characters. The return value has been truncated to
1024 characters.
-=item Variable "%s" is not imported%s
-
-(F) While "use strict" in effect, you referred to a global variable that
-you apparently thought was imported from another module, because
-something else of the same name (usually a subroutine) is exported by
-that module. It usually means you put the wrong funny character on the
-front of your variable.
-
-=item Variable length lookbehind not implemented in regex; marked by <-- HERE in m/%s/
-
-(F) Lookbehind is allowed only for subexpressions whose length is fixed and
-known at compile time. The <-- HERE shows in the regular expression about
-where the problem was discovered. See L<perlre>.
-
-=item "%s" variable %s masks earlier declaration in same %s
-
-(W misc) A "my" or "our" variable has been redeclared in the current
-scope or statement, effectively eliminating all access to the previous
-instance. This is almost always a typographical error. Note that the
-earlier variable will still exist until the end of the scope or until
-all closure referents to it are destroyed.
-
=item Variable "%s" is not available
(W closure) During compilation, an inner named subroutine or eval is
attempting to capture an outer lexical that is not currently available.
-This can be happen for one of two reasons. First, the outer lexical may be
+This can happen for one of two reasons. First, the outer lexical may be
declared in an outer anonymous subroutine that has not yet been created.
(Remember that named subs are created at compile time, while anonymous
-subs are created at run-time. For example,
+subs are created at run-time.) For example,
sub { my $a; sub f { $a } }
Here, when the '$a' in the eval is being compiled, f() is not currently being
executed, so its $a is not available for capture.
+=item Variable "%s" is not imported%s
+
+(F) While "use strict" in effect, you referred to a global variable that
+you apparently thought was imported from another module, because
+something else of the same name (usually a subroutine) is exported by
+that module. It usually means you put the wrong funny character on the
+front of your variable.
+
+=item Variable length lookbehind not implemented in regex; marked by <-- HERE in m/%s/
+
+(F) Lookbehind is allowed only for subexpressions whose length is fixed and
+known at compile time. The <-- HERE shows in the regular expression about
+where the problem was discovered. See L<perlre>.
+
+=item "%s" variable %s masks earlier declaration in same %s
+
+(W misc) A "my" or "our" variable has been redeclared in the current
+scope or statement, effectively eliminating all access to the previous
+instance. This is almost always a typographical error. Note that the
+earlier variable will still exist until the end of the scope or until
+all closure referents to it are destroyed.
+
=item Variable syntax
(A) You've accidentally run your script through B<csh> instead
(W closed) The filehandle you're writing to got itself closed sometime
before now. Check your control flow.
+=item %s "\x%s" does not map to Unicode
+
+When reading in different encodings Perl tries to map everything
+into Unicode characters. The bytes you read in are not legal in
+this encoding, for example
+
+ utf8 "\xE4" does not map to Unicode
+
+if you try to read in the a-diaereses Latin-1 as UTF-8.
+
=item 'X' outside of string
(F) You had a (un)pack template that specified a relative position before
assignment is executed, which is probably not what you want. (If it IS
what you want, put an & in front.)
+=item Your random numbers are not that random
+
+(F) When trying to initialise the random seed for hashes, Perl could
+not get any randomness out of your system. This usually indicates
+Something Very Wrong.
+
=back
=cut
projects / p5sagit/p5-mst-13.2.git / blobdiff