=head1 NAME
-perldelta - what's new for perl v5.7.0
+perldelta - what is new for perl v5.8.0
=head1 DESCRIPTION
-This document describes differences between the 5.6.0 release and
-the 5.7.0 release.
+This document describes differences between the 5.6.0 release
+and the 5.8.0 release.
-=head1 Security Vulnerability Closed
+Many of the bug fixes in 5.8.0 were already seen in the 5.6.1
+maintenance release since the two releases were kept closely
+coordinated.
-A potential security vulnerability in the optional suidperl component
-of Perl has been identified. suidperl is neither built nor installed
-by default. As of August the 20th, 2000, the only known vulnerable
-platform is Linux, most likely all Linux distributions. CERT and
-various vendors have been alerted about the vulnerability.
+If you are upgrading from Perl 5.005_03, you might also want
+to read L<perl56delta>.
-The problem was caused by Perl trying to report a suspected security
-exploit attempt using an external program, /bin/mail. On Linux
-platforms the /bin/mail program had an undocumented feature which gave
-access to a root shell, resulting in a serious compromise instead of
-reporting the exploit attempt. If you don't have /bin/mail, or if you
-have 'safe setuid scripts', or if suidperl is not installed, you
-are safe.
+=head1 Highlights In 5.8.0
-The exploit attempt reporting feature has been completely removed from
-the Perl 5.7.0 release, so that particular vulnerability isn't there
-anymore. However, further security vulnerabilities are,
-unfortunately, always possible. The suidperl code is being reviewed
-and if deemed too risky to continue to be supported, it may be
-completely removed from future releases. In any case, suidperl should
-only be used by security experts who know exactly what they are doing
-and why they are using suidperl instead of some other solution such as
-sudo (see http://www.courtesan.com/sudo/).
+=over 4
-=head1 Incompatible Changes
+=item *
-=over 4
+Better Unicode support
+
+=item *
+
+New Thread Implementation
+
+=item *
+
+Many New Modules
=item *
-Arrays now always interpolate into double-quoted strings:
-constructs like "foo@bar" now always assume C<@bar> is an array,
-whether or not the compiler has seen use of C<@bar>.
+Better Numeric Accuracy
+
+=item *
+
+Safe Signals
+
+=item *
+
+More Extensive Regression Testing
+
+=back
+
+=head1 Incompatible Changes
+
+=head2 64-bit platforms and malloc
+
+If your pointers are 64 bits wide, the Perl malloc is no longer being
+used because it does not work well with 8-byte pointers. Also,
+usually the system mallocs on such platforms are much better optimized
+for such large memory models than the Perl malloc. Some memory-hungry
+Perl applications like the PDL don't work well with Perl's malloc.
+Finally, other applications than Perl (like modperl) tend to prefer
+the system malloc. Such platforms include Alpha and 64-bit HPPA,
+MIPS, PPC, and Sparc.
+
+=head2 AIX Dynaloading
+
+The AIX dynaloading now uses in AIX releases 4.3 and newer the native
+dlopen interface of AIX instead of the old emulated interface. This
+change will probably break backward compatibility with compiled
+modules. The change was made to make Perl more compliant with other
+applications like modperl which are using the AIX native interface.
+
+=head2 Attributes for C<my> variables now handled at run-time.
+
+The C<my EXPR : ATTRS> syntax now applies variable attributes at
+run-time. (Subroutine and C<our> variables still get attributes applied
+at compile-time.) See L<attributes> for additional details. In particular,
+however, this allows variable attributes to be useful for C<tie> interfaces,
+which was a deficiency of earlier releases. Note that the new semantics
+doesn't work with the Attribute::Handlers module (as of version 0.76).
+
+=head2 Socket Extension Dynamic in VMS
+
+The Socket extension is now dynamically loaded instead of being
+statically built in. This may or may not be a problem with ancient
+TCP/IP stacks of VMS: we do not know since we weren't able to test
+Perl in such configurations.
+
+=head2 IEEE-format Floating Point Default on OpenVMS Alpha
+
+Perl now uses IEEE format (T_FLOAT) as the default internal floating
+point format on OpenVMS Alpha, potentially breaking binary compatibility
+with external libraries or existing data. G_FLOAT is still available as
+a configuration option. The default on VAX (D_FLOAT) has not changed.
+
+=head2 New Unicode Properties
+
+Unicode I<scripts> are now supported. Scripts are similar to (and superior
+to) Unicode I<blocks>. The difference between scripts and blocks is that
+scripts are the glyphs used by a language or a group of languages, while
+the blocks are more artificial groupings of (mostly) 256 characters based
+on the Unicode numbering.
+
+In general, scripts are more inclusive, but not universally so. For
+example, while the script C<Latin> includes all the Latin characters and
+their various diacritic-adorned versions, it does not include the various
+punctuation or digits (since they are not solely C<Latin>).
+
+A number of other properties are now supported, including C<\p{L&}>,
+C<\p{Any}> C<\p{Assigned}>, C<\p{Unassigned}>, C<\p{Blank}> and
+C<\p{SpacePerl}> (along with their C<\P{...}> versions, of course).
+See L<perlunicode> for details, and more additions.
+
+The C<In> or C<Is> prefix to names used with the C<\p{...}> and C<\P{...}>
+are now almost always optional. The only exception is that a C<In> prefix
+is required to signify a Unicode block when a block name conflicts with a
+script name. For example, C<\p{Tibetan}> refers to the script, while
+C<\p{InTibetan}> refers to the block. When there is no name conflict, you
+can omit the C<In> from the block name (e.g. C<\p{BraillePatterns}>), but
+to be safe, it's probably best to always use the C<In>).
+
+=head2 REF(...) Instead Of SCALAR(...)
+
+A reference to a reference now stringifies as "REF(0x81485ec)" instead
+of "SCALAR(0x81485ec)" in order to be more consistent with the return
+value of ref().
+
+=head2 pack/unpack D/F recycled
+
+The undocumented pack/unpack template letters D/F have been recycled
+for better use: now they stand for long double (if supported by the
+platform) and NV (Perl internal floating point type). (They used
+to be aliases for d/f, but you never knew that.)
+
+=head2 Deprecations
+
+=over 4
=item *
=item *
+The obsolete chat2 library that should never have been allowed
+to escape the laboratory has been decommissioned.
+
+=item *
+
+The builtin dump() function has probably outlived most of its
+usefulness. The core-dumping functionality will remain in future
+available as an explicit call to C<CORE::dump()>, but in future
+releases the behaviour of an unqualified C<dump()> call may change.
+
+=item *
+
The very dusty examples in the eg/ directory have been removed.
Suggestions for new shiny examples welcome but the main issue is that
the examples need to be documented, tested and (most importantly)
=item *
-The obsolete chat2 library that should never have been allowed
-to escape the laboratory has been decommissioned.
+The (bogus) escape sequences \8 and \9 now give an optional warning
+("Unrecognized escape passed through"). There is no need to \-escape
+any C<\w> character.
+
+=item *
+
+The list of filenames from glob() (or <...>) is now by default sorted
+alphabetically to be csh-compliant (which is what happened before
+in most UNIX platforms). (bsd_glob() does still sort platform
+natively, ASCII or EBCDIC, unless GLOB_ALPHASORT is specified.)
+
+=item *
+
+Spurious syntax errors generated in certain situations, when glob()
+caused File::Glob to be loaded for the first time, have been fixed.
+
+=item *
+
+Although "you shouldn't do that", it was possible to write code that
+depends on Perl's hashed key order (Data::Dumper does this). The new
+algorithm "One-at-a-Time" produces a different hashed key order.
+More details are in L</"Performance Enhancements">.
+
+=item *
+
+lstat(FILEHANDLE) now gives a warning because the operation makes no sense.
+In future releases this may become a fatal error.
+
+=item *
+
+The C<package;> syntax (C<package> without an argument) has been
+deprecated. Its semantics were never that clear and its
+implementation even less so. If you have used that feature to
+disallow all but fully qualified variables, C<use strict;> instead.
=item *
=item *
-lstat(FILEHANDLE) now gives a warning because the operation makes no sense.
-In future releases this may become a fatal error.
+The current user-visible implementation of pseudo-hashes (the weird
+use of the first array element) is deprecated starting from Perl 5.8.0
+and will be removed in Perl 5.10.0, and the feature will be
+implemented differently. Not only is the current interface rather
+ugly, but the current implementation slows down normal array and hash
+use quite noticeably. The C<fields> pragma interface will remain
+available. The I<restricted hashes> interface is expected to
+be the replacement interface (see L<Hash::Util>).
=item *
-The long deprecated uppercase aliases for the string comparison
-operators (EQ, NE, LT, LE, GE, GT) have now been removed.
+The syntaxes C<< @a->[...] >> and C<< %h->{...} >> have now been deprecated.
=item *
-The regular expression captured submatches ($1, $2, ...) are now
-more consistently unset if the match fails, instead of leaving false
-data lying around in them.
+After years of trying the suidperl is considered to be too complex to
+ever be considered truly secure. The suidperl functionality is likely
+to be removed in a future release.
+
+=item *
+
+The long deprecated uppercase aliases for the string comparison
+operators (EQ, NE, LT, LE, GE, GT) have now been removed.
=item *
the interface was a mistake. Sorry about that. For similar
functionality, see pack('U0', ...) and pack('C0', ...).
+=item *
+
+Earlier Perls treated "sub foo (@bar)" as equivalent to "sub foo (@)".
+The prototypes are now checked at compile-time for invalid characters.
+An optional warning is generated ("Illegal character in prototype...")
+but this may be upgraded to a fatal error in a future release.
+
=back
=head1 Core Enhancements
+=head2 PerlIO is Now The Default
+
=over 4
=item *
-C<perl -d:Module=arg,arg,arg> now works (previously one couldn't pass
-in multiple arguments.)
+IO is now by default done via PerlIO rather than system's "stdio".
+PerlIO allows "layers" to be "pushed" onto a file handle to alter the
+handle's behaviour. Layers can be specified at open time via 3-arg
+form of open:
+
+ open($fh,'>:crlf :utf8', $path) || ...
+
+or on already opened handles via extended C<binmode>:
+
+ binmode($fh,':encoding(iso-8859-7)');
+
+The built-in layers are: unix (low level read/write), stdio (as in
+previous Perls), perlio (re-implementation of stdio buffering in a
+portable manner), crlf (does CRLF <=> "\n" translation as on Win32,
+but available on any platform). A mmap layer may be available if
+platform supports it (mostly UNIXes).
+
+Layers to be applied by default may be specified via the 'open' pragma.
+
+See L</"Installation and Configuration Improvements"> for the effects
+of PerlIO on your architecture name.
=item *
-my __PACKAGE__ now works.
+File handles can be marked as accepting Perl's internal encoding of Unicode
+(UTF-8 or UTF-EBCDIC depending on platform) by a pseudo layer ":utf8" :
+
+ open($fh,">:utf8","Uni.txt");
+
+Note for EBCDIC users: the pseudo layer ":utf8" is erroneously named
+for you since it's not UTF-8 what you will be getting but instead
+UTF-EBCDIC. See L<perlunicode>, L<utf8>, and
+http://www.unicode.org/unicode/reports/tr16/ for more information.
+In future releases this naming may change.
=item *
-C<no Module;> now works even if there is no "sub unimport" in the Module.
+File handles can translate character encodings from/to Perl's internal
+Unicode form on read/write via the ":encoding()" layer.
=item *
-The numerical comparison operators return C<undef> if either operand
-is a NaN. Previously the behaviour was unspecified.
+File handles can be opened to "in memory" files held in Perl scalars via:
+
+ open($fh,'>', \$variable) || ...
=item *
-C<pack('U0a*', ...)> can now be used to force a string to UTF8.
+Anonymous temporary files are available without need to
+'use FileHandle' or other module via
+
+ open($fh,"+>", undef) || ...
+
+That is a literal undef, not an undefined value.
=item *
-prototype(\&) is now available.
+The list form of C<open> is now implemented for pipes (at least on UNIX):
+
+ open($fh,"-|", 'cat', '/etc/motd')
+
+creates a pipe, and runs the equivalent of exec('cat', '/etc/motd') in
+the child process.
=item *
-There is now an UNTIE method.
+If your locale environment variables (LANGUAGE, LC_ALL, LC_CTYPE, LANG)
+contain the strings 'UTF-8' or 'UTF8' (case-insensitive matching),
+the default encoding of your STDIN, STDOUT, and STDERR, and of
+B<any subsequent file open>, is UTF-8.
=back
-=head1 Modules and Pragmata
+=head2 Safe Signals
-=head2 New Modules
+Perl used to be fragile in that signals arriving at inopportune moments
+could corrupt Perl's internal state. Now Perl postpones handling of
+signals until it's safe (between opcodes).
+
+This change may have surprising side effects because signals no longer
+interrupt Perl instantly. Perl will now first finish whatever it was
+doing, like finishing an internal operation (like sort()) or an
+external operation (like an I/O operation), and only then look at any
+arrived signals (and before starting the next operation). No more corrupt
+internal state since the current operation is always finished first,
+but the signal may take more time to get heard. Note that breaking
+out from potentially blocking operations should still work, though.
+
+=head2 Unicode Overhaul
+
+Unicode in general should be now much more usable than in Perl 5.6.0
+(or even in 5.6.1). Unicode can be used in hash keys, Unicode in
+regular expressions should work now, Unicode in tr/// should work now,
+Unicode in I/O should work now. See L<perluniintro> for introduction
+and L<perlunicode> for details.
=over 4
=item *
-File::Temp allows one to create temporary files and directories in an
-easy, portable, and secure way.
+The Unicode Character Database coming with Perl has been upgraded
+to Unicode 3.1.1. For more information, see http://www.unicode.org/.
=item *
-Storable gives persistence to Perl data structures by allowing the
-storage and retrieval of Perl data to and from files in a fast and
-compact binary format.
+For developers interested in enhancing Perl's Unicode capabilities:
+almost all the UCD files are included with the Perl distribution in
+the F<lib/unicore subdirectory>. The most notable omission, for space
+considerations, is the Unihan database.
+
+=item *
+
+The properties \p{Blank} and \p{SpacePerl} have been added. "Blank" is like
+C isblank(), that is, it contains only "horizontal whitespace" (the space
+character is, the newline isn't), and the "SpacePerl" is the Unicode
+equivalent of C<\s> (\p{Space} isn't, since that includes the vertical
+tabulator character, whereas C<\s> doesn't.)
+
+See "New Unicode Properties" earlier in this document for additional
+information on changes with Unicode properties.
=back
-=head2 Updated And Improved Modules and Pragmata
+=head2 Understanding of Numbers
+
+In general a lot of fixing has happened in the area of Perl's
+understanding of numbers, both integer and floating point. Since in
+many systems the standard number parsing functions like C<strtoul()>
+and C<atof()> seem to have bugs, Perl tries to work around their
+deficiencies. This results hopefully in more accurate numbers.
+
+Perl now tries internally to use integer values in numeric conversions
+and basic arithmetics (+ - * /) if the arguments are integers, and
+tries also to keep the results stored internally as integers.
+This change leads to often slightly faster and always less lossy
+arithmetics. (Previously Perl always preferred floating point numbers
+in its math.)
+
+=head2 Miscellaneous Changes
=over 4
=item *
-The following independently supported modules have been updated to
-newer versions from CPAN: CGI, CPAN, DB_File, File::Spec, Getopt::Long,
-the podlators bundle, Pod::LaTeX, Pod::Parser, Term::ANSIColor, Test.
+AUTOLOAD is now lvaluable, meaning that you can add the :lvalue attribute
+to AUTOLOAD subroutines and you can assign to the AUTOLOAD return value.
=item *
-Bug fixes and minor enhancements have been applied to B::Deparse,
-Data::Dumper, IO::Poll, IO::Socket::INET, Math::BigFloat,
-Math::Complex, Math::Trig, Net::protoent, the re pragma, SelfLoader,
-Sys::SysLog, Test::Harness, Text::Wrap, UNIVERSAL, and the warnings
-pragma.
+C<perl -d:Module=arg,arg,arg> now works (previously one couldn't pass
+in multiple arguments.)
=item *
-The attributes::reftype() now works on tied arguments.
+The builtin dump() now gives an optional warning
+C<dump() better written as CORE::dump()>,
+meaning that by default C<dump(...)> is resolved as the builtin
+dump() which dumps core and aborts, not as (possibly) user-defined
+C<sub dump>. To call the latter, qualify the call as C<&dump(...)>.
+(The whole dump() feature is to considered deprecated, and possibly
+removed/changed in future releases.)
=item *
-AutoLoader can now be disabled with C<no AutoLoader;>,
+chomp() and chop() are now overridable. Note, however, that their
+prototype (as given by C<prototype("CORE::chomp")> is undefined,
+because it cannot be expressed and therefore one cannot really write
+replacements to override these builtins.
=item *
-The English module can now be used without the infamous performance
-hit by saying
+END blocks are now run even if you exit/die in a BEGIN block.
+Internally, the execution of END blocks is now controlled by
+PL_exit_flags & PERL_EXIT_DESTRUCT_END. This enables the new
+behaviour for Perl embedders. This will default in 5.10. See
+L<perlembed>.
- use English '-no_performance_hit';
+=item *
-(Assuming, of course, that one doesn't need the troublesome variables
-C<$`>, C<$&>, or C<$'>.) Also, introduce C<@LAST_MATCH_START> and
-C<@LAST_MATCH_END> English aliases for C<@-> and C<@+>.
+Formats now support zero-padded decimal fields.
=item *
-File::Find now has pre- and post-processing callbacks. It also
-correctly changes directories when chasing symbolic links. Callbacks
-(naughtily) exiting with "next;" instead of "return;" now work.
+Lvalue subroutines can now return C<undef> in list context.
+However, the lvalue subroutine feature still remains experimental.
=item *
-File::Glob::glob() renamed to File::Glob::bsd_glob() to avoid
-prototype mismatch with CORE::glob().
+A lost warning "Can't declare ... dereference in my" has been
+restored (Perl had it earlier but it became lost in later releases.)
=item *
-IPC::Open3 now allows the use of numeric file descriptors.
+A new special regular expression variable has been introduced:
+C<$^N>, which contains the most-recently closed group (submatch).
=item *
-use lib now works identically to @INC. Removing directories
-with 'no lib' now works.
+C<no Module;> now works even if there is no "sub unimport" in the Module.
=item *
-C<%INC> now localised in a Safe compartment so that use/require work.
+The numerical comparison operators return C<undef> if either operand
+is a NaN. Previously the behaviour was unspecified.
=item *
-The Shell module now has an OO interface.
+The following builtin functions are now overridable: each(), keys(),
+pop(), push(), shift(), splice(), unshift().
=item *
-=back
+C<pack() / unpack()> now can group template letters with C<()> and then
+apply repetition/count modifiers on the groups.
-=head1 Utility Changes
+=item *
-=over 4
+C<pack() / unpack()> can now process the Perl internal numeric types:
+IVs, UVs, NVs-- and also long doubles, if supported by the platform.
+The template letters are C<j>, C<J>, C<F>, and C<D>.
=item *
-The Emacs perl mode (emacs/cperl-mode.el) has been updated to version 4.31.
+C<pack('U0a*', ...)> can now be used to force a string to UTF8.
=item *
-Perlbug is now much more robust. It also sends the bug report to perl.org,
-not perl.com.
+my __PACKAGE__ $obj now works.
=item *
-The perlcc utility has been rewritten and its user interface (that is,
-command line) is much more like that of the UNIX C compiler, cc.
+The printf() and sprintf() now support parameter reordering using the
+C<%\d+\$> and C<*\d+\$> syntaxes. For example
+
+ print "%2\$s %1\$s\n", "foo", "bar";
+
+will print "bar foo\n". This feature helps in writing
+internationalised software, and in general when the order
+of the parameters can vary.
=item *
-The xsubpp utility for extension writers now understands POD
-documentation embedded in the *.xs files.
+prototype(\&) is now available.
-=back
+=item *
-=head1 New Documentation
+prototype(\[$@%&]) is now available to implicitly create references
+(useful for example if you want to emulate the tie() interface).
-=over 4
+=item *
+
+A new command-line option, C<-t> is available. It is the
+little brother of C<-T>: instead of dieing on taint violations,
+lexical warnings are given. B<This is only meant as a temporary
+debugging aid while securing the code of old legacy applications.
+This is not a substitute for -T.>
=item *
-perl56delta details the changes between the 5.005 release and the
-5.6.0 release.
+In other taint news, the C<exec LIST> and C<system LIST> have now been
+considered too risky (think C<exec @ARGV>: it can start any program
+with any arguments), and now the said forms cause a warning.
+You should carefully launder the arguments to guarantee their
+validity. In future releases of Perl the forms will become fatal
+errors so consider starting laundering now.
=item *
-perldebtut is a Perl debugging tutorial.
+If tr/// is just counting characters, it doesn't attempt to
+modify its target.
=item *
-perlebcdic contains considerations for running Perl on EBCDIC platforms.
-Note that unfortunately EBCDIC platforms that used to supported back in
-Perl 5.005 are still unsupported by Perl 5.7.0; the plan, however, is to
-bring them back to the fold.
+untie() will now call an UNTIE() hook if it exists. See L<perltie>
+for details.
=item *
-perlnewmod tells about writing and submitting a new module.
+L<utime> now supports C<utime undef, undef, @files> to change the
+file timestamps to the current time.
=item *
-perlposix-bc explains using Perl on the POSIX-BC platform
-(an EBCDIC mainframe platform).
+The rules for allowing underscores (underbars) in numeric constants
+have been relaxed and simplified: now you can have an underscore
+simply B<between digits>.
=item *
-perlretut is a regular expression tutorial.
+Rather than relying on C's argv[0] (which may not contain a full pathname)
+where possible $^X is now set by asking the operating system.
+(eg by reading F</proc/self/exe> on Linux, F</proc/curproc/file> on FreeBSD)
=item *
-perlrequick is a regular expressions quick-start guide.
-Yes, much quicker than perlretut.
+A new variable, C<${^TAINT}>, indicates whether taint mode is enabled.
=item *
-perlutil explains the command line utilities packaged with the Perl
-distribution.
+You can now override the readline() builtin, and this overrides also
+the <FILEHANDLE> angle bracket operator.
+
+=item *
+
+The command-line options -s and -F are now recognized on the shebang
+(#!) line.
=back
-=head1 Performance Enhancements
+=head1 Modules and Pragmata
+
+=head2 New Modules and Pragmata
=over 4
=item *
-map() that changes the size of the list should now work faster.
+C<Attribute::Handlers> allows a class to define attribute handlers.
+
+ package MyPack;
+ use Attribute::Handlers;
+ sub Wolf :ATTR(SCALAR) { print "howl!\n" }
+
+ # later, in some package using or inheriting from MyPack...
+
+ my MyPack $Fluffy : Wolf; # the attribute handler Wolf will be called
+
+Both variables and routines can have attribute handlers. Handlers can
+be specific to type (SCALAR, ARRAY, HASH, or CODE), or specific to the
+exact compilation phase (BEGIN, CHECK, INIT, or END).
=item *
-
-sort() has been changed to use mergesort internally as opposed to the
-earlier quicksort. For very small lists this may result in slightly
-slower sorting times, but in general the speedup should be at least 20%.
-Additional bonuses are that the worst case behaviour of sort() is now
-better (in computer science terms it now runs in time O(N log N), as
-opposed to quicksorts Theta(N**2) worst-case run time behaviour), and
-that sort() is now stable (meaning that elements with identical keys
-will stay ordered as they were before the sort).
-=back
+B<B::Concise> is a new compiler backend for walking the Perl syntax
+tree, printing concise info about ops, from Stephen McCamant. The
+output is highly customisable. See L<B::Concise>.
-=head1 Installation and Configuration Improvements
+=item *
-=head2 Generic Improvements
+C<Class::ISA> for reporting the search path for a class's ISA tree,
+by Sean Burke, has been added. See L<Class::ISA>.
-=over 4
+=item *
+
+C<Cwd> has now a split personality: if possible, an XS extension is
+used, (this will hopefully be faster, more secure, and more robust)
+but if not possible, the familiar Perl implementation is used.
=item *
-INSTALL now explains how you can configure perl to use 64-bit
-integers even on non-64-bit platforms.
+C<Devel::PPPort>, originally from Kenneth Albanowski and now
+maintained by Paul Marquess, has been added. It is primarily used
+by C<h2xs> to enhance portability of XS modules between different
+versions of Perl.
=item *
-Policy.sh policy change: if you are reusing a Policy.sh file (see
-INSTALL) and you use Configure -Dprefix=/foo/bar and in the old
-Policy $prefix eq $siteprefix and $prefix eq $vendorprefix, all of
-them will now be changed to the new prefix, /foo/bar. (Previously
-only $prefix changed.) If you do not like this new behaviour,
-specify prefix, siteprefix, and vendorprefix explicitly.
+C<Digest>, frontend module for calculating digests (checksums), from
+Gisle Aas, has been added. See L<Digest>.
=item *
-A new optional location for Perl libraries, otherlibdirs, is available.
-It can be used for example for vendor add-ons without disturbing Perl's
-own library directories.
+C<Digest::MD5> for calculating MD5 digests (checksums) as defined in
+RFC 1321, from Gisle Aas, has been added. See L<Digest::MD5>.
+
+ use Digest::MD5 'md5_hex';
+
+ $digest = md5_hex("Thirsty Camel");
+
+ print $digest, "\n"; # 01d19d9d2045e005c3f1b80e8b164de1
+
+NOTE: the C<MD5> backward compatibility module is deliberately not
+included since its further use is discouraged.
+
+=item *
+
+C<Encode>, by Nick Ing-Simmons, provides a mechanism to translate
+between different character encodings. Support for Unicode,
+ISO-8859-*, ASCII, CP*, KOI8-R, and three variants of EBCDIC are
+compiled in to the module. Several other encodings (like Chinese,
+Japanese, Korean, and MacIntosh encodings) are included and will be
+loaded at runtime. (For space considerations, the largest Chinese
+encodings have been separated into their own CPAN module,
+Encode::HanExtra). See L<Encode>.
+
+Any encoding supported by Encode module is also available to the
+":encoding()" layer if PerlIO is used.
+
+=item *
+
+C<Hash::Util> is the interface to the new I<restricted hashes>
+feature. A restricted hash is restricted to a certain set of keys,
+no keys outside the set can be added. Also individual keys can be
+restricted so that the key cannot be deleted and the value cannot be
+changed. (Implemented by Jeffrey Friedl, Nick Ing-Simmons, and
+Michael Schwern.)
+
+=item *
+
+C<I18N::Langinfo> can be use to query locale information.
+See L<I18N::Langinfo>.
+
+=item *
+
+C<I18N::LangTags> has functions for dealing with RFC3066-style
+language tags, by Sean Burke. See L<I18N::LangTags>.
+
+=item *
+
+C<ExtUtils::Constant> is a new tool for extension writers for
+generating XS code to import C header constants, by Nicholas Clark.
+See L<ExtUtils::Constant>.
+
+=item *
+
+C<Filter::Simple> is an easy-to-use frontend to Filter::Util::Call,
+from Damian Conway. See L<Filter::Simple>.
+
+ # in MyFilter.pm:
+
+ package MyFilter;
+
+ use Filter::Simple sub {
+ while (my ($from, $to) = splice @_, 0, 2) {
+ s/$from/$to/g;
+ }
+ };
+
+ 1;
+
+ # in user's code:
+
+ use MyFilter qr/red/ => 'green';
+
+ print "red\n"; # this code is filtered, will print "green\n"
+ print "bored\n"; # this code is filtered, will print "bogreen\n"
+
+ no MyFilter;
+
+ print "red\n"; # this code is not filtered, will print "red\n"
+
+=item *
+
+C<File::Temp> allows one to create temporary files and directories in
+an easy, portable, and secure way, by Tim Jenness. See L<File::Temp>.
+
+=item *
+
+C<Filter::Util::Call> provides you with the framework to write
+I<Source Filters> in Perl, from Paul Marquess. For most uses the
+frontend Filter::Simple is to be preferred. See L<Filter::Util::Call>.
+
+=item *
+
+C<if> is a new pragma for conditional inclusion of modules, from
+Ilya Zakharevich.
+
+=item *
+
+L<libnet> is a collection of perl5 modules related to network
+programming, from Graham Barr. See L<Net::FTP>, L<Net::NNTP>,
+L<Net::Ping>, L<Net::POP3>, L<Net::SMTP>, and L<Net::Time>.
+
+Perl installation leaves libnet unconfigured, use F<libnetcfg> to configure.
+
+=item *
+
+C<List::Util> is a selection of general-utility list subroutines, like
+sum(), min(), first(), and shuffle(), by Graham Barr. See L<List::Util>.
+
+=item *
+
+C<Locale::Constants>, C<Locale::Country>, C<Locale::Currency>, and
+C<Locale::Language>, from Neil Bowers, have been added. They provide the
+codes for various locale standards, such as "fr" for France, "usd" for
+US Dollar, and "jp" for Japanese.
+
+ use Locale::Country;
+
+ $country = code2country('jp'); # $country gets 'Japan'
+ $code = country2code('Norway'); # $code gets 'no'
+
+See L<Locale::Constants>, L<Locale::Country>, L<Locale::Currency>,
+and L<Locale::Language>.
+
+=item *
+
+C<Locale::Maketext> is localization framework from Sean Burke. See
+L<Locale::Maketext>, and L<Locale::Maketext::TPJ13>. The latter is an
+article about software localization, originally published in The Perl
+Journal #13, republished here with kind permission.
+
+=item *
+
+C<Memoize> can make your functions faster by trading space for time,
+from Mark-Jason Dominus. See L<Memoize>.
+
+=item *
+
+C<MIME::Base64> allows you to encode data in base64, from Gisle Aas,
+as defined in RFC 2045 - I<MIME (Multipurpose Internet Mail
+Extensions)>.
+
+ use MIME::Base64;
+
+ $encoded = encode_base64('Aladdin:open sesame');
+ $decoded = decode_base64($encoded);
+
+ print $encoded, "\n"; # "QWxhZGRpbjpvcGVuIHNlc2FtZQ=="
+
+See L<MIME::Base64>.
+
+=item *
+
+C<MIME::QuotedPrint> allows you to encode data in quoted-printable
+encoding, as defined in RFC 2045 - I<MIME (Multipurpose Internet Mail
+Extensions)>, from Gisle Aas.
+
+ use MIME::QuotedPrint;
+
+ $encoded = encode_qp("Smiley in Unicode: \x{263a}");
+ $decoded = decode_qp($encoded);
+
+ print $encoded, "\n"; # "Smiley in Unicode: =263A"
+
+MIME::QuotedPrint has been enhanced to provide the basic methods
+necessary to use it with PerlIO::Via as in :
+
+ use MIME::QuotedPrint;
+ open($fh,">Via(MIME::QuotedPrint)",$path);
+
+See L<MIME::QuotedPrint>.
+
+=item *
+
+C<NEXT> is pseudo-class for method redispatch, from Damian Conway.
+See L<NEXT>.
+
+=item *
+
+C<open> is a new pragma for setting the default I/O disciplines
+for open().
+
+=item *
+
+C<PerlIO::Scalar> provides the implementation of IO to "in memory"
+Perl scalars as discussed above, from Nick Ing-Simmons. It also
+serves as an example of a loadable PerlIO layer. Other future
+possibilities include PerlIO::Array and PerlIO::Code.
+See L<PerlIO::Scalar>.
+
+=item *
+
+C<PerlIO::Via> acts as a PerlIO layer and wraps PerlIO layer
+functionality provided by a class (typically implemented in perl
+code), from Nick Ing-Simmons.
+
+ use MIME::QuotedPrint;
+ open($fh,">Via(MIME::QuotedPrint)",$path);
+
+This will automatically convert everything output to C<$fh>
+to Quoted-Printable. See L<PerlIO::Via>.
+
+=item *
+
+C<Pod::ParseLink>, by Russ Allbery, has been added,
+to parse LZ<><> links in pods as described in the new
+perlpodspec.
+
+=item *
+
+C<Pod::Text::Overstrike>, by Joe Smith, has been added.
+It converts POD data to formatted overstrike text.
+See L<Pod::Text::Overstrike>.
+
+=item *
+
+C<Scalar::Util> is a selection of general-utility scalar subroutines,
+like blessed(), reftype(), and tainted(). See L<Scalar::Util>.
+
+=item *
+
+C<sort> is a new pragma for controlling the behaviour of sort().
+
+=item *
+
+C<Storable> gives persistence to Perl data structures by allowing the
+storage and retrieval of Perl data to and from files in a fast and
+compact binary format, from Raphael Manfredi. See L<Storable>.
+
+=item *
+
+C<Switch>, from Damian Conway, has been added. Just by saying
+
+ use Switch;
+
+you have C<switch> and C<case> available in Perl.
+
+ use Switch;
+
+ switch ($val) {
+
+ case 1 { print "number 1" }
+ case "a" { print "string a" }
+ case [1..10,42] { print "number in list" }
+ case (@array) { print "number in list" }
+ case /\w+/ { print "pattern" }
+ case qr/\w+/ { print "pattern" }
+ case (%hash) { print "entry in hash" }
+ case (\%hash) { print "entry in hash" }
+ case (\&sub) { print "arg to subroutine" }
+ else { print "previous case not true" }
+ }
+
+See L<Switch>.
+
+=item *
+
+C<Test::More> is yet another framework for writing test scripts,
+more extensive than Test::Simple, by Michael Schwern. See L<Test::More>.
+
+=item *
+
+C<Test::Simple> has basic utilities for writing tests, by Michael
+Schwern. See L<Test::Simple>.
+
+=item *
+
+C<Text::Balanced> has been added, for extracting delimited text
+sequences from strings, from Damian Conway.
+
+ use Text::Balanced 'extract_delimited';
+
+ ($a, $b) = extract_delimited("'never say never', he never said", "'", '');
+
+$a will be "'never say never'", $b will be ', he never said'.
+
+In addition to extract_delimited() there are also extract_bracketed(),
+extract_quotelike(), extract_codeblock(), extract_variable(),
+extract_tagged(), extract_multiple(), gen_delimited_pat(), and
+gen_extract_tagged(). With these you can implement rather advanced
+parsing algorithms. See L<Text::Balanced>.
+
+=item *
+
+C<threads> is an interface to interpreter threads, by Arthur Bergman.
+Interpreter threads (ithreads) is the new thread model introduced in
+Perl 5.6 but only available as an internal interface for extension
+writers (and for Win32 Perl for C<fork()> emulation). See L<threads>.
+
+=item *
+
+C<threads::shared> allows data sharing for interpreter threads, from
+Arthur Bergman. In the ithreads model any data sharing between
+threads must be explicit, as opposed to the old 5.005 thread model
+where data sharing was implicit. See L<threads::shared>.
+
+=item *
+
+C<Tie::File>, by Mark-Jason Dominus, associates a Perl array with the
+lines of a file.
+
+=item *
+
+C<Tie::Memoize>, by Ilya Zakharevich, provides on-demand loaded hashes.
+
+=item *
+
+C<Tie::RefHash::Nestable>, by Edward Avis, allows storing hash
+references (unlike the standard Tie::RefHash) The module is contained
+within Tie::RefHash, see L<Tie::RefHash>.
+
+=item *
+
+C<Time::HiRes> provides high resolution timing (ualarm, usleep,
+and gettimeofday), from Douglas E. Wegscheid. See L<Time::HiRes>.
+
+=item *
+
+C<Unicode::UCD> offers a querying interface to the Unicode Character
+Database. See L<Unicode::UCD>.
+
+=item *
+
+C<Unicode::Collate> implements the UCA (Unicode Collation Algorithm)
+for sorting Unicode strings, by SADAHIRO Tomoyuki. See L<Unicode::Collate>.
+
+=item *
+
+C<Unicode::Normalize> implements the various Unicode normalization
+forms, by SADAHIRO Tomoyuki. See L<Unicode::Normalize>.
+
+=item *
+
+C<XS::Typemap>, by Tim Jenness, is a test extension that exercises XS
+typemaps. Nothing gets installed but for extension writers the code
+is worth studying.
+
+=back
+
+=head2 Updated And Improved Modules and Pragmata
+
+=over 4
+
+=item *
+
+The following independently supported modules have been updated to the
+newest versions from CPAN: CGI, CPAN, DB_File, File::Spec, File::Temp,
+Getopt::Long, Math::BigFloat, Math::BigInt, the podlators bundle
+(Pod::Man, Pod::Text), Pod::LaTeX, Pod::Parser, Storable,
+Term::ANSIColor, Test, Text-Tabs+Wrap.
+
+=item *
+
+The attributes::reftype() now works on tied arguments.
+
+=item *
+
+AutoLoader can now be disabled with C<no AutoLoader;>.
+
+=item *
+
+B::Deparse has been significantly enhanced. It now can deparse almost
+all of the standard test suite (so that the tests still succeed).
+There is a make target "test.deparse" for trying this out.
+
+=item *
+
+Class::Struct can now define the classes in compile time.
+
+=item *
+
+Class::Struct now assigns the array/hash element if the accessor
+is called with an array/hash element as the B<sole> argument.
+
+=item *
+
+Data::Dumper has now an option to sort hashes.
+
+=item *
+
+Data::Dumper has now an option to dump code references
+using B::Deparse.
+
+=item *
+
+DB_File now supports newer Berkeley DB versions, among
+other improvements.
+
+=item *
+
+The English module can now be used without the infamous performance
+hit by saying
+
+ use English '-no_match_vars';
+
+(Assuming, of course, that one doesn't need the troublesome variables
+C<$`>, C<$&>, or C<$'>.) Also, introduced C<@LAST_MATCH_START> and
+C<@LAST_MATCH_END> English aliases for C<@-> and C<@+>.
+
+=item *
+
+Fcntl, Socket, and Sys::Syslog have been rewritten to use the
+new-style constant dispatch section (see L<ExtUtils::Constant>).
+This means that they will be more robust and hopefully faster.
+
+=item *
+
+File::Find now chdir()s correctly when chasing symbolic links.
+
+=item *
+
+File::Find now has pre- and post-processing callbacks. It also
+correctly changes directories when chasing symbolic links. Callbacks
+(naughtily) exiting with "next;" instead of "return;" now work.
+
+=item *
+
+File::Find is now (again) reentrant. It also has been made
+more portable.
+
+=item *
+
+The warnings issued by File::Find now belong to their own category.
+You can enable/disable them with C<use/no warnings 'File::Find';>.
+
+=item *
+
+File::Glob::glob() renamed to File::Glob::bsd_glob() to avoid
+prototype mismatch with CORE::glob().
+
+=item *
+
+File::Glob now supports C<GLOB_LIMIT> constant to limit the size of
+the returned list of filenames.
+
+=item *
+
+Devel::Peek now has an interface for the Perl memory statistics
+(this works only if you are using perl's malloc, and if you have
+compiled with debugging).
+
+=item *
+
+IPC::Open3 now allows the use of numeric file descriptors.
+
+=item *
+
+IO::Socket has now atmark() method, which returns true if the socket
+is positioned at the out-of-band mark. The method is also exportable
+as a sockatmark() function.
+
+=item *
+
+IO::Socket::INET has support for ReusePort option (if your platform
+supports it). The Reuse option now has an alias, ReuseAddr. For clarity
+you may want to prefer ReuseAddr.
+
+=item *
+
+IO::Socket::INET now supports C<LocalPort> of zero (usually meaning
+that the operating system will make one up.)
+
+=item *
+
+use lib now works identically to @INC. Removing directories
+with 'no lib' now works.
+
+=item *
+
+ExtUtils::MakeMaker now uses File::Spec internally, which hopefully
+leads into better portability.
+
+=item *
+
+Math::BigFloat and Math::BigInt have undergone a full rewrite.
+They are now magnitudes faster, and they support various
+bignum libraries such as GMP and PARI as their backends.
+
+=item *
+
+Math::Complex handles inf, NaN etc., better.
+
+=item *
+
+Net::Ping has been muchly enhanced. Multihoming is now supported.
+There is now "external" protocol which uses Net::Ping::External module
+which runs external ping(1) and parses the output. A version of
+Net::Ping::External is available in CPAN.
+
+=item *
+
+POSIX::sigaction() is now much more flexible and robust.
+You can now install coderef handlers, 'DEFAULT', and 'IGNORE'
+handlers, installing new handlers was not atomic.
+
+=item *
+
+In Safe the C<%INC> now localised in a Safe compartment so that
+use/require work.
+
+=item *
+
+In SDBM_File on dosish platforms, some keys went missing because of
+lack of support for files with "holes". A workaround for the problem
+has been added.
+
+=item *
+
+In Search::Dict one can now have a pre-processing hook for the
+lines being searched.
+
+=item *
+
+The Shell module now has an OO interface.
+
+=item *
+
+In Sys::Syslog there is now a failover mechanism that will go
+through alternative connection mechanisms until the message
+is successfully logged.
+
+=item *
+
+The Test module has been significantly enhanced.
+
+=item *
+
+Time::Local::timelocal() does not handle fractional seconds anymore.
+The rationale is that neither does localtime(), and timelocal() and
+localtime() are supposed to be inverses of each other.
+
+=item *
+
+The vars pragma now supports declaring fully qualified variables.
+(Something that C<our()> does not and will not support.)
+
+=item *
+
+The C<utf8::> name space (as in the pragma) provides various
+Perl-callable functions to provide low level access to Perl's
+internal Unicode representation. At the moment only length()
+has been implemented.
+
+=back
+
+=head1 Utility Changes
+
+=over 4
+
+=item *
+
+Emacs perl mode (emacs/cperl-mode.el) has been updated to version
+4.31.
+
+=item *
+
+F<emacs/e2ctags.pl> is now much faster.
+
+=item *
+
+C<h2ph> now supports C trigraphs.
+
+=item *
+
+C<h2xs> now produces a template README.
+
+=item *
+
+C<h2xs> now uses C<Devel::PPort> for better portability between
+different versions of Perl.
+
+=item *
+
+C<h2xs> uses the new L<ExtUtils::Constant> module which will affect
+newly created extensions that define constants. Since the new code is
+more correct (if you have two constants where the first one is a
+prefix of the second one, the first constant B<never> gets defined),
+less lossy (it uses integers for integer constant, as opposed to the
+old code that used floating point numbers even for integer constants),
+and slightly faster, you might want to consider regenerating your
+extension code (the new scheme makes regenerating easy).
+L<h2xs> now also supports C trigraphs.
+
+=item *
+
+C<libnetcfg> has been added to configure the libnet.
+
+=item *
+
+C<perlbug> is now much more robust. It also sends the bug report to
+perl.org, not perl.com.
+
+=item *
+
+C<perlcc> has been rewritten and its user interface (that is,
+command line) is much more like that of the UNIX C compiler, cc.
+(The perlbc tools has been removed. Use C<perlcc -B> instead.)
+
+=item *
+
+C<perlivp> is a new Installation Verification Procedure utility
+for running any time after installing Perl.
+
+=item *
+
+C<pod2html> now allows specifying a cache directory.
+
+=item *
+
+C<s2p> has been completely rewritten in Perl. (It is in fact a full
+implementation of sed in Perl: you can use the sed functionality by
+using the C<psed> utility.)
+
+=item *
+
+C<xsubpp> now understands POD documentation embedded in the *.xs files.
+
+=item *
+
+C<xsubpp> now supports OUT keyword.
+
+=back
+
+=head1 New Documentation
+
+=over 4
+
+=item *
+
+perl56delta details the changes between the 5.005 release and the
+5.6.0 release.
+
+=item *
+
+perlclib documents the internal replacements for standard C library
+functions. (Interesting only for extension writers and Perl core
+hackers.)
+
+=item *
+
+perldebtut is a Perl debugging tutorial.
+
+=item *
+
+perlebcdic contains considerations for running Perl on EBCDIC platforms.
+
+=item *
+
+perlintro is a gentle introduction to Perl.
+
+=item *
+
+perliol documents the internals of PerlIO with layers.
+
+=item *
+
+perlmodstyle is a style guide for writing modules.
+
+=item *
+
+perlnewmod tells about writing and submitting a new module.
+
+=item *
+
+perlpacktut is a pack() tutorial.
+
+=item *
+
+perlpod has been rewritten to be clearer and to record the best
+practices gathered over the years.
+
+=item *
+
+perlpodspec is a more formal specification of the pod format,
+mainly of interest for writers of pod applications, not to
+people writing in pod.
+
+=item *
+
+perlretut is a regular expression tutorial.
+
+=item *
+
+perlrequick is a regular expressions quick-start guide.
+Yes, much quicker than perlretut.
+
+=item *
+
+perltodo has been updated.
+
+=item *
+
+perltootc has been renamed as perltooc (to not to conflict
+with perltoot in filesystems restricted to "8.3" names)
+
+=item *
+
+perluniintro is an introduction to using Unicode in Perl.
+(perlunicode is more of a detailed reference and background
+information)
+
+=item *
+
+perlutil explains the command line utilities packaged with the Perl
+distribution.
+
+=back
+
+The following platform-specific documents are available before
+the installation as README.I<platform>, and after the installation
+as perlI<platform>:
+
+ perlaix perlamiga perlapollo perlbeos perlbs2000
+ perlce perlcygwin perldgux perldos perlepoc perlhpux
+ perlhurd perlmachten perlmacos perlmint perlmpeix
+ perlnetware perlos2 perlos390 perlplan9 perlqnx perlsolaris
+ perltru64 perluts perlvmesa perlvms perlvos perlwin32
+
+=over 4
+
+=item *
+
+The documentation for the POSIX-BC platform is called "BS2000", to avoid
+confusion with the Perl POSIX module.
+
+=item *
+
+The documentation for the WinCE platform is called "CE", to avoid
+confusion with the perlwin32 documentation on 8.3-restricted filesystems.
+
+=back
+
+=head1 Performance Enhancements
+
+=over 4
+
+=item *
+
+map() could get pathologically slow when the result list it generates
+is larger than the source list. The performance has been improved for
+common scenarios.
+
+=item *
+
+sort() has been changed to use primarily mergesort internally as
+opposed to the earlier quicksort. For very small lists this may
+result in slightly slower sorting times, but in general the speedup
+should be at least 20%. Additional bonuses are that the worst case
+behaviour of sort() is now better (in computer science terms it now
+runs in time O(N log N), as opposed to quicksort's Theta(N**2)
+worst-case run time behaviour), and that sort() is now stable
+(meaning that elements with identical keys will stay ordered as they
+were before the sort). See the C<sort> pragma for information.
+
+The story in more detail: suppose you want to serve yourself a little
+slice of Pi.
+
+ @digits = ( 3,1,4,1,5,9 );
+
+A numerical sort of the digits will yield (1,1,3,4,5,9), as expected.
+Which C<1> comes first is hard to know, since one C<1> looks pretty
+much like any other. You can regard this as totally trivial,
+or somewhat profound. However, if you just want to sort the even
+digits ahead of the odd ones, then what will
+
+ sort { ($a % 2) <=> ($b % 2) } @digits;
+
+yield? The only even digit, C<4>, will come first. But how about
+the odd numbers, which all compare equal? With the quicksort algorithm
+used to implement Perl 5.6 and earlier, the order of ties is left up
+to the sort. So, as you add more and more digits of Pi, the order
+in which the sorted even and odd digits appear will change.
+and, for sufficiently large slices of Pi, the quicksort algorithm
+in Perl 5.8 won't return the same results even if reinvoked with the
+same input. The justification for this rests with quicksort's
+worst case behavior. If you run
+
+ sort { $a <=> $b } ( 1 .. $N , 1 .. $N );
+
+(something you might approximate if you wanted to merge two sorted
+arrays using sort), doubling $N doesn't just double the quicksort time,
+it I<quadruples> it. Quicksort has a worst case run time that can
+grow like N**2, so-called I<quadratic> behaviour, and it can happen
+on patterns that may well arise in normal use. You won't notice this
+for small arrays, but you I<will> notice it with larger arrays,
+and you may not live long enough for the sort to complete on arrays
+of a million elements. So the 5.8 quicksort scrambles large arrays
+before sorting them, as a statistical defence against quadratic behaviour.
+But that means if you sort the same large array twice, ties may be
+broken in different ways.
+
+Because of the unpredictability of tie-breaking order, and the quadratic
+worst-case behaviour, quicksort was I<almost> replaced completely with
+a stable mergesort. I<Stable> means that ties are broken to preserve
+the original order of appearance in the input array. So
+
+ sort { ($a % 2) <=> ($b % 2) } (3,1,4,1,5,9);
+
+will yield (4,3,1,1,5,9), guaranteed. The even and odd numbers
+appear in the output in the same order they appeared in the input.
+Mergesort has worst case O(NlogN) behaviour, the best value
+attainable. And, ironically, this mergesort does particularly
+well where quicksort goes quadratic: mergesort sorts (1..$N, 1..$N)
+in O(N) time. But quicksort was rescued at the last moment because
+it is faster than mergesort on certain inputs and platforms.
+For example, if you really I<don't> care about the order of even
+and odd digits, quicksort will run in O(N) time; it's very good
+at sorting many repetitions of a small number of distinct elements.
+The quicksort divide and conquer strategy works well on platforms
+with relatively small, very fast, caches. Eventually, the problem gets
+whittled down to one that fits in the cache, from which point it
+benefits from the increased memory speed.
+
+Quicksort was rescued by implementing a sort pragma to control aspects
+of the sort. The B<stable> subpragma forces stable behaviour,
+regardless of algorithm. The B<_quicksort> and B<_mergesort>
+subpragmas are heavy-handed ways to select the underlying implementation.
+The leading C<_> is a reminder that these subpragmas may not survive
+beyond 5.8. More appropriate mechanisms for selecting the implementation
+exist, but they wouldn't have arrived in time to save quicksort.
+
+=item *
+
+Hashes now use Bob Jenkins "One-at-a-Time" hashing key algorithm
+(http://burtleburtle.net/bob/hash/doobs.html). This algorithm is
+reasonably fast while producing a much better spread of values than
+the old hashing algorithm (originally by Chris Torek, later tweaked by
+Ilya Zakharevich). Hash values output from the algorithm on a hash of
+all 3-char printable ASCII keys comes much closer to passing the
+DIEHARD random number generation tests. According to perlbench, this
+change has not affected the overall speed of Perl.
+
+=item *
+
+unshift() should now be noticeably faster.
+
+=back
+
+=head1 Installation and Configuration Improvements
+
+=head2 Generic Improvements
+
+=over 4
+
+=item *
+
+INSTALL now explains how you can configure Perl to use 64-bit
+integers even on non-64-bit platforms.
+
+=item *
+
+Policy.sh policy change: if you are reusing a Policy.sh file
+(see INSTALL) and you use Configure -Dprefix=/foo/bar and in the old
+Policy $prefix eq $siteprefix and $prefix eq $vendorprefix, all of
+them will now be changed to the new prefix, /foo/bar. (Previously
+only $prefix changed.) If you do not like this new behaviour,
+specify prefix, siteprefix, and vendorprefix explicitly.
+
+=item *
+
+A new optional location for Perl libraries, otherlibdirs, is available.
+It can be used for example for vendor add-ons without disturbing Perl's
+own library directories.
+
+=item *
+
+In many platforms the vendor-supplied 'cc' is too stripped-down to
+build Perl (basically, 'cc' doesn't do ANSI C). If this seems
+to be the case and 'cc' does not seem to be the GNU C compiler
+'gcc', an automatic attempt is made to find and use 'gcc' instead.
+
+=item *
+
+gcc needs to closely track the operating system release to avoid
+build problems. If Configure finds that gcc was built for a different
+operating system release than is running, it now gives a clearly visible
+warning that there may be trouble ahead.
+
+=item *
+
+If binary compatibility with the 5.005 release is not wanted, Configure
+no longer suggests including the 5.005 modules in @INC.
+
+=item *
+
+Configure C<-S> can now run non-interactively.
+
+=item *
+
+Configure support for pdp11-style memory models has been removed due
+to obsolescence.
+
+=item *
+
+configure.gnu now works with options with whitespace in them.
+
+=item *
+
+installperl now outputs everything to STDERR.
+
+=item *
+
+$Config{byteorder} is now computed dynamically (this is more robust
+with "fat binaries" where an executable image contains binaries for
+more than one binary platform.)
+
+=item *
+
+Because PerlIO is now the default on most platforms, "-perlio" doesn't
+get appended to the $Config{archname} (also known as $^O) anymore.
+Instead, if you explicitly choose not to use perlio (Configure command
+line option -Uuseperlio), you will get "-stdio" appended.
+
+=item *
+
+Another change related to the architecture name is that "-64all"
+(-Duse64bitall, or "maximally 64-bit") is appended only if your
+pointers are 64 bits wide. (To be exact, the use64bitall is ignored.)
+
+=item *
+
+In AFS installations one can configure the root of the AFS to be
+somewhere else than the default F</afs> by using the Configure
+parameter C<-Dafsroot=/some/where/else>.
+
+=item *
+
+APPLLIB_EXP, a less-know configuration-time definition, has been
+documented. It can be used to prepend site-specific directories
+to Perl's default search path (@INC), see INSTALL for information.
+
+=item *
+
+The version of Berkeley DB used when the Perl (and, presumably, the
+DB_File extension) was built is now available as
+C<@Config{qw(db_version_major db_version_minor db_version_patch)}>
+from Perl and as C<DB_VERSION_MAJOR_CFG DB_VERSION_MINOR_CFG
+DB_VERSION_PATCH_CFG> from C.
+
+=item *
+
+Building Berkeley DB3 for compatibility modes for DB, NDBM, and ODBM
+has been documented in INSTALL.
+
+=item *
+
+If you have CPAN access (either network or a local copy such as a
+CD-ROM) you can during specify extra modules to Configure to build and
+install with Perl using the -Dextras=... option. See INSTALL for
+more details.
+
+=item *
+
+In addition to config.over a new override file, config.arch, is
+available. That is supposed to be used by hints file writers for
+architecture-wide changes (as opposed to config.over which is for
+site-wide changes).
+
+=item *
+
+If your file system supports symbolic links you can build Perl outside
+of the source directory by
+
+ mkdir /tmp/perl/build/directory
+ cd /tmp/perl/build/directory
+ sh /path/to/perl/source/Configure -Dmksymlinks ...
+
+This will create in /tmp/perl/build/directory a tree of symbolic links
+pointing to files in /path/to/perl/source. The original files are left
+unaffected. After Configure has finished you can just say
+
+ make all test
+
+and Perl will be built and tested, all in /tmp/perl/build/directory.
+
+=item *
+
+For Perl developers several new make targets for profiling
+and debugging have been added, see L<perlhack>.
+
+=over 8
+
+=item *
+
+Use of the F<gprof> tool to profile Perl has been documented in
+L<perlhack>. There is a make target called "perl.gprof" for
+generating a gprofiled Perl executable.
+
+=item *
+
+If you have GCC 3, there is a make target called "perl.gcov" for
+creating a gcoved Perl executable for coverage analysis. See
+L<perlhack>.
+
+=item *
+
+If you are on IRIX or Tru64 platforms, new profiling/debugging options
+have been added, see L<perlhack> for more information about pixie and
+Third Degree.
+
+=back
+
+=item *
+
+Guidelines of how to construct minimal Perl installations have
+been added to INSTALL.
+
+=item *
+
+The Thread extension is now not built at all under ithreads
+(C<Configure -Duseithreads>) because it wouldn't work anyway (the
+Thread extension requires being Configured with C<-Duse5005threads>).
+
+But note that the Thread.pm interface is now shared by both
+thread models.
+
+=item *
+
+The Gconvert macro ($Config{d_Gconvert}) used by perl for stringifying
+floating-point numbers is now more picky about using sprintf %.*g
+rules for the conversion. Some platforms that used to use gcvt may
+now resort to the slower sprintf.
+
+=back
+
+=head2 New Or Improved Platforms
+
+For the list of platforms known to support Perl,
+see L<perlport/"Supported Platforms">.
+
+=over 4
+
+=item *
+
+AIX dynamic loading should be now better supported.
+
+=item *
+
+AIX should now work better with gcc, threads, and 64-bitness. Also the
+long doubles support in AIX should be better now. See L<perlaix>.
+
+=item *
+
+After a long pause, AmigaOS has been verified to be happy with Perl.
+
+=item *
+
+AtheOS (http://www.atheos.cx/) is a new platform.
+
+=item *
+
+BeOS has been reclaimed.
+
+=item *
+
+DG/UX platform now supports the 5.005-style threads. See L<perldgux>.
+
+=item *
+
+DYNIX/ptx platform (a.k.a. dynixptx) is supported at or near osvers 4.5.2.
+
+=item *
+
+EBCDIC platforms (z/OS, also known as OS/390, POSIX-BC, and VM/ESA)
+have been regained. Many test suite tests still fail and the
+co-existence of Unicode and EBCDIC isn't quite settled, but the
+situation is much better than with Perl 5.6. See L<perlos390>,
+L<perlbs2000> (for POSIX-BC), and L<perlvmesa> for more information.
+
+=item *
+
+Building perl with -Duseithreads or -Duse5005threads now works under
+HP-UX 10.20 (previously it only worked under 10.30 or later). You will
+need a thread library package installed. See README.hpux.
+
+=item *
+
+MacOS Classic (MacPerl has of course been available since
+perl 5.004 but now the source code bases of standard Perl
+and MacPerl have been synchronised)
+
+=item *
+
+MacOS X (or Darwin) should now be able to build Perl even on HFS+
+filesystems. (The case-insensitivity confused the Perl build process.)
+
+=item *
+
+NCR MP-RAS is now supported.
+
+=item *
+
+All the NetBSD specific patches (except for the installation
+specific ones) have been merged back to the main distribution.
+
+=item *
+
+NetWare from Novell is now supported. See L<perlnetware>.
+
+=item *
+
+NonStop-UX is now supported.
+
+=item *
+
+NEC SUPER-UX is now supported.
+
+=item *
+
+All the OpenBSD specific patches (except for the installation
+specific ones) have been merged back to the main distribution.
+
+=item *
+
+Perl has been tested with the GNU pth userlevel thread package
+( http://www.gnu.org/software/pth/pth.html ) . All but one thread
+test worked, and that one failure was because of test results arriving
+in unexpected order.
+
+=item *
+
+Amdahl UTS UNIX mainframe platform is now supported.
+
+=item *
+
+WinCE is now supported. See L<perlce>.
+
+=item *
+
+z/OS (formerly known as OS/390, formerly known as MVS OE) has now
+support for dynamic loading. This is not selected by default,
+however, you must specify -Dusedl in the arguments of Configure.
+
+=back
+
+=head1 Selected Bug Fixes
+
+Numerous memory leaks and uninitialized memory accesses have been
+hunted down. Most importantly anonymous subs used to leak quite
+a bit.
+
+=over 4
+
+=item *
+
+The autouse pragma didn't work for Multi::Part::Function::Names.
+
+=item *
+
+caller() could cause core dumps in certain situations. Carp was sometimes
+affected by this problem.
+
+=item *
+
+chop(@list) in list context returned the characters chopped in
+reverse order. This has been reversed to be in the right order.
+
+=item *
+
+Configure no longer includes the DBM libraries (dbm, gdbm, db, ndbm)
+when building the Perl binary. The only exception to this is SunOS 4.x,
+which needs them.
+
+=item *
+
+The behaviour of non-decimal but numeric string constants such as
+"0x23" was platform-dependent: in some platforms that was seen as 35,
+in some as 0, in some as a floating point number (don't ask). This
+was caused by Perl using the operating system libraries in a situation
+where the result of the string to number conversion is undefined: now
+Perl consistently handles such strings as zero in numeric contexts.
+
+=item *
+
+The order of DESTROYs has been made more predictable.
+
+=item *
+
+Several debugger fixes: exit code now reflects the script exit code,
+condition C<"0"> now treated correctly, the C<d> command now checks
+line number, the C<$.> no longer gets corrupted, all debugger output
+now goes correctly to the socket if RemotePort is set.
+
+=item *
+
+Perl 5.6.0 could emit spurious warnings about redefinition of dl_error()
+when statically building extensions into perl. This has been corrected.
+
+=item *
+
+L<dprofpp> -R didn't work.
+
+=item *
+
+C<*foo{FORMAT}> now works.
+=item *
+
+Infinity is now recognized as a number.
+
+=item *
+
+UNIVERSAL::isa no longer caches methods incorrectly. (This broke
+the Tk extension with 5.6.0.)
+
+=item *
+
+Lexicals I: lexicals outside an eval "" weren't resolved
+correctly inside a subroutine definition inside the eval "" if they
+were not already referenced in the top level of the eval""ed code.
+
+=item *
+
+Lexicals II: lexicals leaked at file scope into subroutines that
+were declared before the lexicals.
+
+=item *
+
+Lexical warnings now propagating correctly between scopes
+and into C<eval "...">.
+
+=item *
+
+C<use warnings qw(FATAL all)> did not work as intended. This has been
+corrected.
+
+=item *
+
+warnings::enabled() now reports the state of $^W correctly if the caller
+isn't using lexical warnings.
+
+=item *
+
+Line renumbering with eval and C<#line> now works.
+
+=item *
+
+Fixed numerous memory leaks, especially in eval "".
+
+=item *
+
+mkdir() now ignores trailing slashes in the directory name,
+as mandated by POSIX.
+
+=item *
+
+Some versions of glibc have a broken modfl(). This affects builds
+with C<-Duselongdouble>. This version of Perl detects this brokenness
+and has a workaround for it. The glibc release 2.2.2 is known to have
+fixed the modfl() bug.
+
+=item *
+
+Modulus of unsigned numbers now works (4063328477 % 65535 used to
+return 27406, instead of 27047).
+
+=item *
+
+Some "not a number" warnings introduced in 5.6.0 eliminated to be
+more compatible with 5.005. Infinity is now recognised as a number.
+
+=item *
+
+Numeric conversions did not recognize changes in the string value
+properly in certain circumstances.
+
+=item *
+
+Attributes (like :shared) didn't work with our().
+
+=item *
+
+our() variables will not cause "will not stay shared" warnings.
=item *
-In many platforms the vendor-supplied 'cc' is too stripped-down to
-build Perl (basically, 'cc' doesn't do ANSI C). If this seems
-to be the case and 'cc' does not seem to be the GNU C compiler
-'gcc', an automatic attempt is made to find and use 'gcc' instead.
+"our" variables of the same name declared in two sibling blocks
+resulted in bogus warnings about "redeclaration" of the variables.
+The problem has been corrected.
=item *
-gcc needs to closely track the operating system release to avoid
-build problems. If Configure finds that gcc was built for a different
-operating system release than is running, it now gives a clearly visible
-warning that there may be trouble ahead.
+pack "Z" now correctly terminates the string with "\0".
=item *
-If binary compatibility with the 5.005 release is not wanted, Configure
-no longer suggests including the 5.005 modules in @INC.
+Fix password routines which in some shadow password platforms
+(e.g. HP-UX) caused getpwent() to return every other entry.
=item *
-Configure C<-S> can now run non-interactively.
+The PERL5OPT environment variable (for passing command line arguments
+to Perl) didn't work for more than a single group of options.
=item *
-configure.gnu now works with options with whitespace in them.
+PERL5OPT with embedded spaces didn't work.
=item *
-installperl now outputs everything to STDERR.
+printf() no longer resets the numeric locale to "C".
=item *
-$Config{byteorder} is now computed dynamically (this is more robust
-with "fat binaries" where an executable image contains binaries for
-more than one binary platform.)
+C<qw(a\\b)> now parses correctly as C<'a\\b'>.
-=back
+=item *
-=head1 Selected Bug Fixes
+pos() did not return the correct value within s///ge in earlier
+versions. This is now handled correctly.
-=over 4
+=item *
+
+Printing quads (64-bit integers) with printf/sprintf now works
+without the q L ll prefixes (assuming you are on a quad-capable platform).
=item *
-Several debugger fixes: exit code now reflects the script exit code,
-condition C<"0"> now treated correctly, the C<d> command now checks
-line number, the C<$.> no longer gets corrupted, all debugger output now
-goes correctly to the socket if RemotePort is set.
+Regular expressions on references and overloaded scalars now work.
=item *
-C<*foo{FORMAT}> now works.
+Right-hand side magic (GMAGIC) could in many cases such as string
+concatenation be invoked too many times.
=item *
-Lexical warnings now propagating correctly between scopes.
+scalar() now forces scalar context even when used in void context.
=item *
-Line renumbering with eval and C<#line> now works.
+SOCKS support is now much more robust.
=item *
-Fixed numerous memory leaks, especially in eval "".
+sort() arguments are now compiled in the right wantarray context
+(they were accidentally using the context of the sort() itself).
+The comparison block is now run in scalar context, and the arguments
+to be sorted are always provided list context.
=item *
-Modulus of unsigned numbers now works (4063328477 % 65535 used to
-return 27406, instead of 27047).
+Changed the POSIX character class C<[[:space:]]> to include the (very
+rarely used) vertical tab character. Added a new POSIX-ish character
+class C<[[:blank:]]> which stands for horizontal whitespace
+(currently, the space and the tab).
=item *
-Some "not a number" warnings introduced in 5.6.0 eliminated to be
-more compatible with 5.005. Infinity is now recognised as a number.
+The tainting behaviour of sprintf() has been rationalized. It does
+not taint the result of floating point formats anymore, making the
+behaviour consistent with that of string interpolation.
=item *
-our() variables will not cause "will not stay shared" warnings.
+Some cases of inconsistent taint propagation (such as within hash
+values) have been fixed.
=item *
-pack "Z" now correctly terminates the string with "\0".
+The RE engine found in Perl 5.6.0 accidentally pessimised certain kinds
+of simple pattern matches. These are now handled better.
=item *
-Fix password routines which in some shadow password platforms
-(e.g. HP-UX) caused getpwent() to return every other entry.
+Regular expression debug output (whether through C<use re 'debug'>
+or via C<-Dr>) now looks better.
=item *
-printf() no longer resets the numeric locale to "C".
+Multi-line matches like C<"a\nxb\n" =~ /(?!\A)x/m> were flawed. The
+bug has been fixed.
=item *
-C<q(a\\b)> now parses correctly as C<'a\\b'>.
+Use of $& could trigger a core dump under some situations. This
+is now avoided.
=item *
-Printing quads (64-bit integers) with printf/sprintf now works
-without the q L ll prefixes (assuming you are on a quad-capable platform).
+The regular expression captured submatches ($1, $2, ...) are now
+more consistently unset if the match fails, instead of leaving false
+data lying around in them.
=item *
-Regular expressions on references and overloaded scalars now work.
+readline() on files opened in "slurp" mode could return an extra "" at
+the end in certain situations. This has been corrected.
=item *
-scalar() now forces scalar context even when used in void context.
+Autovivification of symbolic references of special variables described
+in L<perlvar> (as in C<${$num}>) was accidentally disabled. This works
+again now.
=item *
-
-sort() arguments are now compiled in the right wantarray context
-(they were accidentally using the context of the sort() itself).
+
+Sys::Syslog ignored the C<LOG_AUTH> constant.
=item *
-Changed the POSIX character class C<[[:space:]]> to include the (very
-rare) vertical tab character. Added a new POSIX-ish character class
-C<[[:blank:]]> which stands for horizontal whitespace (currently,
-the space and the tab).
+All but the first argument of the IO syswrite() method are now optional.
=item *
=item *
+Tie::ARRAY SPLICE method was broken.
+
+=item *
+
Allow read-only string on left hand side of non-modifying tr///.
=item *
-Several Unicode fixes (but still not perfect).
+If C<STDERR> is tied, warnings caused by C<warn> and C<die> now
+correctly pass to it.
+
+=item *
+
+Several Unicode fixes.
=over 8
BOMs (byte order marks) in the beginning of Perl files
(scripts, modules) should now be transparently skipped.
-UTF16 encoded Perl files should now be read correctly.
+UTF-16 (UCS-2) encoded Perl files should now be read correctly.
=item *
-The character tables have been updated to new Unicode 3.0 features.
+The character tables have been updated to Unicode 3.1.1.
=item *
-chr() for values greater than 127 now create utf8 when under use
-utf8.
+Comparing with utf8 data does not magically upgrade non-utf8 data
+into utf8. (This was a problem for example if you were mixing data
+from I/O and Unicode data: your output might have got magically encoded
+as UTF-8.)
=item *
-Comparing with utf8 data does not magically upgrade non-utf8 data into
-utf8.
+Generating illegal Unicode code points like U+FFFE, or the UTF-16
+surrogates, now also generates an optional warning.
=item *
Concatenation with the C<.> operator or via variable interpolation,
C<eq>, C<substr>, C<reverse>, C<quotemeta>, the C<x> operator,
-substitution with C<s///>, single-quoted UTF8, should now work--in
-theory.
+substitution with C<s///>, single-quoted UTF8, should now work.
=item *
-The C<tr///> operator now works I<slightly> better but is still rather
-broken. Note that the C<tr///CU> functionality has been removed (but
-see pack('U0', ...)).
+The C<tr///> operator now works. Note that the C<tr///CU>
+functionality has been removed (but see pack('U0', ...)).
+
+=item *
+
+C<eval "v200"> now works.
+
+=item *
+
+Perl 5.6.0 parsed m/\x{ab}/ incorrectly, leading to spurious warnings.
+This has been corrected.
=item *
=item *
-UNIVERSAL::isa no longer caches methods incorrectly. (This broke
-the Tk extension with 5.6.0.)
+Large unsigned numbers (those above 2**31) could sometimes lose their
+unsignedness, causing bogus results in arithmetic operations.
=back
All BSDs
-Setting C<$0> now works (as much as possible; see perlvar for details).
+Setting C<$0> now works (as much as possible; see L<perlvar> for details).
=item *
Cygwin
-Numerous updates; currently synchronised with Cygwin 1.1.4.
+Numerous updates; currently synchronised with Cygwin 1.3.10.
+
+=item *
+
+Previously DYNIX/ptx had problems in its Configure probe for non-blocking I/O.
=item *
HP-UX
-README.hpux updated; C<Configure -Duse64bitall> now almost works.
+README.hpux updated; C<Configure -Duse64bitall> now works.
=item *
Linux
+=over 8
+
+=item *
+
Long doubles should now work (see INSTALL).
=item *
+Linux previously had problems related to sockaddrlen when using
+accept(), revcfrom() (in Perl: recv()), getpeername(), and getsockname().
+
+=back
+
+=item *
+
MacOS Classic
Compilation of the standard Perl distribution in MacOS Classic should
chdir() now works better despite a CRT bug; now works with MULTIPLICITY
(see INSTALL); now works with Perl's malloc.
+The tainting of C<%ENV> elements via C<keys> or C<values> was previously
+unimplemented. It now works as documented.
+
+The C<waitpid> emulation has been improved. The worst bug (now fixed)
+was that a pid of -1 would cause a wildcard search of all processes on
+the system. The most significant enhancement is that we can now
+usually get the completion status of a terminated process.
+
+POSIX-style signals are now emulated much better on VMS versions prior
+to 7.0.
+
+The C<system> function and backticks operator have improved
+functionality and better error handling.
+
+File access tests now use current process privileges rather than the
+user's default privileges, which could sometimes result in a mismatch
+between reported access and actual access.
+
=item *
Windows
=item *
+Borland C++ v5.5 is now a supported compiler that can build Perl.
+However, the generated binaries continue to be incompatible with those
+generated by the other supported compilers (GCC and Visual C++).
+
+=item *
+
Better chdir() return value for a non-existent directory.
=item *
+Duping socket handles with open(F, ">&MYSOCK") now works under Windows 9x.
+
+=item *
+
New %ENV entries now propagate to subprocesses.
=item *
+Current directory entries in %ENV are now correctly propagated to child
+processes.
+
+=item *
+
$ENV{LIB} now used to search for libs under Visual C.
=item *
+fork() emulation has been improved in various ways, but still continues
+to be experimental. See L<perlfork> for known bugs and caveats.
+
+=item *
+
A failed (pseudo)fork now returns undef and sets errno to EAGAIN.
=item *
+Win32::GetCwd() correctly returns C:\ instead of C: when at the drive root.
+Other bugs in chdir() and Cwd::cwd() have also been fixed.
+
+=item *
+
+HTML files will be installed in c:\perl\html instead of c:\perl\lib\pod\html
+
+=item *
+
+The makefiles now provide a single switch to bulk-enable all the features
+enabled in ActiveState ActivePerl (a popular Win32 binary distribution).
+
+=item *
+
Allow REG_EXPAND_SZ keys in the registry.
=item *
=item *
+%SIG has been enabled under USE_ITHREADS, but its use is completely
+unsupported under all configurations.
+
+=item *
+
Less stack reserved per thread so that more threads can run
-concurrently. (still 16M perl thread)
+concurrently. (Still 16M per thread.)
=item *
-C<File::Spec->tmpdir()> now prefers C:/temp over /tmp
-(works better when perl running as service).
+C<File::Spec->tmpdir()> now prefers C:/temp over /tmp
+(works better when perl is running as service).
=item *
=item *
-wait() and waitpid() now work much better.
+wait(), waitpid() and backticks now return the correct exit status under
+Windows 9x.
=item *
winsock handle leak fixed.
+=item *
+
+The Perl parser has been stress tested using both random input and
+Markov chain input and the few found crashes and lockups have been
+fixed.
+
+=back
+
=back
=head1 New or Changed Diagnostics
+=over 4
+
+=item *
+
+The lexical warnings category "deprecated" is no longer a sub-category
+of the "syntax" category. It is now a top-level category in its own
+right.
+
+=item *
+
All regular expression compilation error messages are now hopefully
easier to understand both because the error message now comes before
the failed regex and because the point of failure is now clearly
-marked.
+marked by a C<E<lt>-- HERE> marker.
+
+=item *
The various "opened only for", "on closed", "never opened" warnings
drop the C<main::> prefix for filehandles in the C<main> package,
-for example C<STDIN> instead of <main::STDIN>.
+for example C<STDIN> instead of C<main::STDIN>.
+
+=item *
The "Unrecognized escape" warning has been extended to include C<\8>,
C<\9>, and C<\_>. There is no need to escape any of the C<\w> characters.
+=item *
+
+Two new debugging options have been added: if you have compiled your
+Perl with debugging, you can use the -DT and -DR options to trace
+tokenising and to add reference counts to displaying variables,
+respectively.
+
+=item *
+
+The debugger (perl5db.pl) has been modified to present a more
+consistent commands interface, via (CommandSet=580). perl5db.t was
+also added to test the changes, and as a placeholder for further tests.
+
+See L<perldebug>.
+
+=item *
+
+The debugger has a new C<dumpDepth> option to control the maximum
+depth to which nested structures are dumped. The C<x> command has
+been extended so that C<x N EXPR> dumps out the value of I<EXPR> to a
+depth of at most I<N> levels.
+
+=item *
+
+The debugger can now show lexical variables if you have the CPAN
+module PadWalker installed.
+
+=item *
+
+If an attempt to use a (non-blessed) reference as an array index
+is made, a warning is given.
+
+=item *
+
+C<push @a;> and C<unshift @a;> (with no values to push or unshift)
+now give a warning. This may be a problem for generated and evaled
+code.
+
+=item *
+
+If you try to L<perlfunc/pack> a number less than 0 or larger than 255
+using the C<"C"> format you will get an optional warning. Similarly
+for the C<"c"> format and a number less than -128 or more than 127.
+
+=item *
+
+Certain regex modifiers such as C<(?o)> make sense only if applied to
+the entire regex. You will get an optional warning if you try to do
+otherwise.
+
+=item *
+
+Using arrays or hashes as references (e.g. C<< %foo->{bar} >>
+has been deprecated for a while. Now you will get an optional warning.
+
+=item *
+
+Using C<sort> in scalar context now issues an optional warning.
+This didn't do anything useful, as the sort was not performed.
+
+=back
+
=head1 Changed Internals
=over 4
Building microperl does not require even running Configure;
C<make -f Makefile.micro> should be enough. Beware: microperl makes
many assumptions, some of which may be too bold; the resulting
-executable may crash or otherwise misbehave in wondrous ways. For
-careful hackers only.
+executable may crash or otherwise misbehave in wondrous ways.
+For careful hackers only.
=item *
-Added rsignal(), whichsig(), do_join() to the publicised API.
+Added rsignal(), whichsig(), do_join(), op_clear, op_null,
+ptr_table_clear(), ptr_table_free(), sv_setref_uv(), and several UTF-8
+interfaces to the publicised API. For the full list of the available
+APIs see L<perlapi>.
=item *
=item *
-Added is_utf8_char(), is_utf8_string(), bytes_to_utf8(), and utf8_to_bytes().
+Now xsubs can have attributes just like subs. (Well, at least the
+built-in attributes.)
+
+=item *
+
+dTHR and djSP have been obsoleted; the former removed (because it's
+a no-op) and the latter replaced with dSP.
+
+=item *
+
+PERL_OBJECT has been completely removed.
+
+=item *
+
+The MAGIC constants (e.g. C<'P'>) have been macrofied
+(e.g. C<PERL_MAGIC_TIED>) for better source code readability
+and maintainability.
+
+=item *
+
+The regex compiler now maintains a structure that identifies nodes in
+the compiled bytecode with the corresponding syntactic features of the
+original regex expression. The information is attached to the new
+C<offsets> member of the C<struct regexp>. See L<perldebguts> for more
+complete information.
+
+=item *
+
+The C code has been made much more C<gcc -Wall> clean. Some warning
+messages still remain in some platforms, so if you are compiling with
+gcc you may see some warnings about dubious practices. The warnings
+are being worked on.
+
+=item *
+
+F<perly.c>, F<sv.c>, and F<sv.h> have now been extensively commented.
=item *
-Now xsubs can have attributes just like subs.
+Documentation on how to use the Perl source repository has been added
+to F<Porting/repository.pod>.
+
+=item *
+
+There are now several profiling make targets.
=back
+=head1 Security Vulnerability Closed
+
+(This change was already made in 5.7.0 but bears repeating here.)
+
+A potential security vulnerability in the optional suidperl component
+of Perl was identified in August 2000. suidperl is neither built nor
+installed by default. As of November 2001 the only known vulnerable
+platform is Linux, most likely all Linux distributions. CERT and
+various vendors and distributors have been alerted about the vulnerability.
+See http://www.cpan.org/src/5.0/sperl-2000-08-05/sperl-2000-08-05.txt
+for more information.
+
+The problem was caused by Perl trying to report a suspected security
+exploit attempt using an external program, /bin/mail. On Linux
+platforms the /bin/mail program had an undocumented feature which
+when combined with suidperl gave access to a root shell, resulting in
+a serious compromise instead of reporting the exploit attempt. If you
+don't have /bin/mail, or if you have 'safe setuid scripts', or if
+suidperl is not installed, you are safe.
+
+The exploit attempt reporting feature has been completely removed from
+Perl 5.8.0 (and the maintenance release 5.6.1, and it was removed also
+from all the Perl 5.7 releases), so that particular vulnerability
+isn't there anymore. However, further security vulnerabilities are,
+unfortunately, always possible. The suidperl functionality is most
+probably going to be removed in Perl 5.10. In any case, suidperl
+should only be used by security experts who know exactly what they are
+doing and why they are using suidperl instead of some other solution
+such as sudo (see http://www.courtesan.com/sudo/).
+
+=head1 New Tests
+
+Several new tests have been added, especially for the F<lib>
+subsection. There are now about 56 000 individual tests (spread over
+about 620 test scripts), in the regression suite (5.6.1 has about
+11700 tests, in 258 test scripts) Many of the new tests are introduced
+by the new modules, but still in general Perl is now more thoroughly
+tested.
+
+Because of the large number of tests, running the regression suite
+will take considerably longer time than it used to: expect the suite
+to take up to 4-5 times longer to run than in perl 5.6. In a really
+fast machine you can hope to finish the suite in about 6-8 minutes
+(wallclock time).
+
+The tests are now reported in a different order than in earlier Perls.
+(This happens because the test scripts from under t/lib have been moved
+to be closer to the library/extension they are testing.)
+
=head1 Known Problems
-=head2 Unicode Support Still Far From Perfect
+=head2 AIX
-We're working on it. Stay tuned.
+=over 4
-=head2 EBCDIC Still A Lost Platform
+=item *
-The plan is to bring them back.
+In AIX 4.2 Perl extensions that use C++ functions that use statics
+may have problems in that the statics are not getting initialized.
+In newer AIX releases this has been solved by linking Perl with
+the libC_r library, but unfortunately in AIX 4.2 the said library
+has an obscure bug where the various functions related to time
+(such as time() and gettimeofday()) return broken values, and
+therefore in AIX 4.2 Perl is not linked against the libC_r.
-=head2 Building Extensions Can Fail Because Of Largefiles
+=item *
-Certain extensions like mod_perl and BSD::Resource are known to have
-issues with `largefiles', a change brought by Perl 5.6.0 in which file
-offsets default to 64 bits wide, where supported. Modules may fail to
-compile at all or compile and work incorrectly. Currently there is no
-good solution for the problem, but Configure now provides appropriate
-non-largefile ccflags, ldflags, libswanted, and libs in the %Config
-hash (e.g., $Config{ccflags_nolargefiles}) so the extensions that are
-having problems can try configuring themselves without the
-largefileness. This is admittedly not a clean solution, and the
-solution may not even work at all. One potential failure is whether
-one can (or, if one can, whether it's a good idea) link together at
-all binaries with different ideas about file offsets, all this is
-platform-dependent.
+vac 5.0.0.0 May Produce Buggy Code For Perl
+
+The AIX C compiler vac version 5.0.0.0 may produce buggy code,
+resulting in few random tests failing, but when the failing tests
+are run by hand, they succeed. We suggest upgrading to at least
+vac version 5.0.1.0, that has been known to compile Perl correctly.
+"lslpp -L|grep vac.C" will tell you the vac version. See README.aix.
+
+=back
+
+=head2 Amiga Perl Invoking Mystery
+
+One cannot call Perl using the C<volume:> syntax, that is, C<perl -v>
+works, but for example C<bin:perl -v> doesn't. The exact reason isn't
+known but the current suspect is the F<ixemul> library.
+
+=head2 mod_perl 1.3 Doesn't Build With -D_GNU_SOURCE
-=head2 ftmp-security tests warn 'system possibly insecure'
+In Linux, building mod_perl with B<threaded> Perl 5.8.0 does not work
+because starting from 5.8.0 building a threaded Perl uses the
+-D_GNU_SOURCE flag. The Apache 1.3 sources that are built alongside
+the mod_perl don't like that flag and the compilation dies because of
+function prototype conflicts. This may or may not get fixed in later
+releases of mod_perl 1.3 or Apache 1.3 (fixing the problem in Perl is
+less likely since threaded Perl now needs the -D_GNU_SOURCE>).
+Workarounds include using non-threaded Perl and using Apache 2.0.
+An obvious workaround would be to stop the -D_GNU_SOURCE from reaching
+the Apache 1.3 sources, but as of Perl 5.8.0, the complex build system
+of mod_perl has foiled this idea.
-Don't panic. Read INSTALL 'make test' section instead.
+=head2 lib/ftmp-security tests warn 'system possibly insecure'
-=head2 Test lib/posix Subtest 9 Fails In LP64-Configured HP-UX
+Don't panic. Read INSTALL 'make test' section instead.
+
+=head2 HP-UX lib/posix Subtest 9 Fails When LP64-Configured
If perl is configured with -Duse64bitall, the successful result of the
subtest 10 of lib/posix may arrive before the successful result of the
subtest 9, which confuses the test harness so much that it thinks the
subtest 9 failed.
-=head2 Long Doubles Still Don't Work In Solaris
-
-The experimental long double support is still very much so in Solaris.
-(Other platforms like Linux and Tru64 are beginning to solidify in
-this area.)
-
=head2 Linux With Sfio Fails op/misc Test 48
No known fix.
-=head2 Storable tests fail in some platforms
+=head2 Mac OS X
-If any Storable tests fail the use of Storable is not advisable.
+The following tests are known to fail:
-=over 4
+ Failed Test Stat Wstat Total Fail Failed List of Failed
+ -------------------------------------------------------------------------
+ ../ext/DB_File/t/db-btree.t 0 11 ?? ?? % ??
+ ../ext/DB_File/t/db-recno.t 149 3 2.01% 61 63 65
+ ../ext/POSIX/t/posix.t 31 1 3.23% 10
-=item *
+If you are building on a UFS partition, you will also probably see
+t/op/stat.t subtest #9 fail. This is caused by Darwin's UFS not
+supporting inode change time.
-Many Storable tests fail on AIX configured with 64 bit integers.
+=head2 z/OS (OS/390)
-So far unidentified problems break Storable in AIX if Perl is
-configured to use 64 bit integers. AIX in 32-bit mode works and
-other 64-bit platforms work with Storable.
+z/OS has rather many test failures but the situation is actually
+better than it was in 5.6.0, it's just that so many new modules and
+tests have been added.
-=item *
+ Failed Test Stat Wstat Total Fail Failed List of Failed
+ -------------------------------------------------------------------------
+ ../ext/Data/Dumper/t/dumper.t 321 2 0.62% 311 314
+ ../ext/IO/lib/IO/t/io_unix.t 5 4 80.00% 2-5
+ ../lib/utf8.t 94 13 13.83% 27 30-31 43 46 73
+ 76 79 82 85 88 91
+ 94
+ ../lib/Benchmark.t 1 256 159 1 0.63% 75
+ ../lib/ExtUtils/t/Constant.t 27 19 70.37% 5-23
+ ../lib/ExtUtils/t/Embed.t 9 9 100.00% 1-9
+ op/pat.t 864 9 1.04% 242-243 665 776
+ 785 832-834 845
+ op/sprintf.t 224 3 1.34% 98 100 136
+ op/tr.t 97 5 5.15% 63 71-74
+ uni/fold.t 767 8 1.04% 25-26 62 169 196
+ 648 697-698
+ 60 tests and 384 subtests skipped.
-DOS DJGPP may hang when testing Storable.
+=head2 op/sprintf tests 129 and 130
-=item *
+The op/sprintf tests 129 and 130 are known to fail on some platforms.
+Examples include any platform using sfio, and Compaq/Tandem's NonStop-UX.
+The failing platforms do not comply with the ANSI C Standard, line
+19ff on page 134 of ANSI X3.159 1989 to be exact. (They produce
+something other than "1" and "-1" when formatting 0.6 and -0.6 using
+the printf format "%.0f", most often they produce "0" and "-0".)
-st-06compat fails in UNICOS and UNICOS/mk.
+=head2 Failure of Thread tests
-This means that you cannot read old (pre-Storable-0.7) Storable images
-made in other platforms.
+B<Note that support for 5.005-style threading remains experimental
+and practically unsupported.>
-=item *
+The following tests are known to fail due to fundamental problems in
+the 5.005 threading implementation. These are not new failures--Perl
+5.005_0x has the same bugs, but didn't have these tests.
+
+ ../ext/List/Util/t/first.t 255 65280 7 4 57.14% 2 5-7
+ ../lib/English.t 2 512 54 2 3.70% 2-3
+ ../lib/Filter/Simple/t/data.t 6 3 50.00% 1-3
+ ../lib/Filter/Simple/t/filter_onl 9 3 33.33% 1-2 5
+ ../lib/autouse.t 10 1 10.00% 4
+ op/flip.t 15 1 6.67% 15
+
+These failures are unlikely to get fixed as the 5.005-style
+threads are considered fundamentally broken.
+
+=head2 UNICOS
+
+ Failed Test Stat Wstat Total Fail Failed List of Failed
+ -------------------------------------------------------------------------
+ ../ext/Socket/socketpair.t 1 256 45 1 2.22% 12
+ ../lib/Math/Trig.t 26 1 3.85% 25
+ ../lib/warnings.t 460 1 0.22% 425
+ io/fs.t 36 1 2.78% 31
+ op/numconvert.t 1440 13 0.90% 208 509-510
+ 657-658 665-666 829-830 989-990 1149-1150
-st-store.t and st-retrieve may fail with Compaq C 6.2 on OpenVMS Alpha 7.2.
+=head2 UNICOS and UNICOS/mk
-=head2 Threads Are Still Experimental
+The io/fs test #31 is failing because in UNICOS and UNICOS/mk
+truncate() cannot be used to grow the size of filehandles, only
+to reduce the size. The workaround is to truncate files instead
+of filehandles.
-Multithreading is still an experimental feature. Some platforms
-emit the following message for lib/thr5005
+=head2 UTS
- #
- # This is a KNOWN FAILURE, and one of the reasons why threading
- # is still an experimental feature. It is here to stop people
- # from deploying threads in production. ;-)
- #
-
-and another known warning is
+There are a few known test failures, see L<perluts>.
- pragma/overload......Unbalanced saves: 3 more saves than restores
- panic: magic_mutexfree during global destruction.
- ok
- lib/selfloader.......Unbalanced saves: 3 more saves than restores
- panic: magic_mutexfree during global destruction.
- ok
- lib/st-dclone........Unbalanced saves: 3 more saves than restores
- panic: magic_mutexfree during global destruction.
- ok
+=head2 VMS
+
+There should be no reported test failures with a default configuration,
+though there are a number of tests marked TODO that point to areas
+needing further debugging and/or porting work.
+
+=head2 Win32
+
+In multi-CPU boxes there are some problems with the I/O buffering:
+some output may appear twice. The following Win32 failures are known
+as of 5.7.3:
+
+ Failed Test Stat Wstat Total Fail Failed List of Failed
+ -------------------------------------------------------------------------
+ ..\ext/threads/t/end.t 6 4 66.67% 3-6
+
+=head2 Localising a Tied Variable Leaks Memory
+
+ use Tie::Hash;
+ tie my %tie_hash => 'Tie::StdHash';
+
+ ...
+
+ local($tie_hash{Foo}) = 1; # leaks
+
+Code like the above is known to leak memory every time the local()
+is executed.
+
+=head2 Localising Tied Arrays and Hashes Is Broken
+
+ local %tied_array;
+
+doesn't work as one would expect: the old value is restored
+incorrectly.
+
+=head2 Self-tying of Arrays and Hashes Is Forbidden
+
+Self-tying of arrays and hashes is broken in rather deep and
+hard-to-fix ways. As a stop-gap measure to avoid people from getting
+frustrated at the mysterious results (core dumps, most often) it is
+for now forbidden (you will get a fatal error even from an attempt).
+
+=head2 Building Extensions Can Fail Because Of Largefiles
+
+Some extensions like mod_perl are known to have issues with
+`largefiles', a change brought by Perl 5.6.0 in which file offsets
+default to 64 bits wide, where supported. Modules may fail to compile
+at all or compile and work incorrectly. Currently there is no good
+solution for the problem, but Configure now provides appropriate
+non-largefile ccflags, ldflags, libswanted, and libs in the %Config
+hash (e.g., $Config{ccflags_nolargefiles}) so the extensions that are
+having problems can try configuring themselves without the
+largefileness. This is admittedly not a clean solution, and the
+solution may not even work at all. One potential failure is whether
+one can (or, if one can, whether it's a good idea) link together at
+all binaries with different ideas about file offsets, all this is
+platform-dependent.
+
+=head2 Unicode Support on EBCDIC Still Spotty
+
+Though mostly working, Unicode support still has problem spots on
+EBCDIC platforms. One such known spot are the C<\p{}> and C<\P{}>
+regular expression constructs for code points less than 256: the
+pP are testing for Unicode code points, not knowing about EBCDIC.
=head2 The Compiler Suite Is Still Experimental
-The compiler suite is slowly getting better but is nowhere near yet.
-The backend part that has seen perhaps the most progress is the
-bytecode compiler.
+The compiler suite is slowly getting better but it continues to be
+highly experimental. Use in production environments is discouraged.
-=back
+=head2 The Long Double Support Is Still Experimental
+
+The ability to configure Perl's numbers to use "long doubles",
+floating point numbers of hopefully better accuracy, is still
+experimental. The implementations of long doubles are not yet
+widespread and the existing implementations are not quite mature
+or standardised, therefore trying to support them is a rare
+and moving target. The gain of more precision may also be offset
+by slowdown in computations (more bits to move around, and the
+operations are more likely to be executed by less optimised
+libraries).
+
+=head2 Seen In Perl 5.7 But Gone Now
+
+C<Time::Piece> (previously known as C<Time::Object>) was removed
+because it was felt that it didn't have enough value in it to be a
+core module. It is still a useful module, though, and is available
+from the CPAN.
=head1 Reporting Bugs
If you find what you think is a bug, you might check the articles
recently posted to the comp.lang.perl.misc newsgroup and the perl
bug database at http://bugs.perl.org. There may also be
-information at http://www.perl.com/perl/, the Perl Home Page.
+information at http://www.perl.com/, the Perl Home Page.
If you believe you have an unreported bug, please run the B<perlbug>
program included with your release. Be sure to trim your bug down
=head1 HISTORY
-Written by Jarkko Hietaniemi <F<jhi@iki.fi>>, with many contributions
-from The Perl Porters and Perl Users submitting feedback and patches.
-
-Send omissions or corrections to <F<perlbug@perl.org>>.
+Written by Jarkko Hietaniemi <F<jhi@iki.fi>>.
=cut