=head1 NAME
-perldelta - what will be new for perl v5.8.0
+perldelta - what is new for perl v5.8.0
=head1 DESCRIPTION
-This document does not exist yet. When the Perl 5.8.0 is released
-this document will describe the changes since Perl 5.6.0, the previous
-major release. In the meanwhile, see L<perl570delta> and
-L<perl571delta>.
+This document describes differences between the 5.6.0 release
+and the 5.8.0 release.
+
+Many of the bug fixes in 5.8.0 were already seen in the 5.6.1
+maintenance release since the two releases were kept closely
+coordinated.
+
+If you are upgrading from Perl 5.005_03, you might also want
+to read L<perl56delta>.
+
+=head1 Highlights In 5.8.0
+
+=over 4
+
+=item *
+
+Better Unicode support
+
+=item *
+
+New Thread Implementation
+
+=item *
+
+Many New Modules
+
+=item *
+
+Better Numeric Accuracy
+
+=item *
+
+Safe Signals
+
+=item *
+
+More Extensive Regression Testing
+
+=back
+
+=head1 Incompatible Changes
+
+=head2 64-bit platforms and malloc
+
+If your pointers are 64 bits wide, the Perl malloc is no longer being
+used because it does not work well with 8-byte pointers. Also,
+usually the system mallocs on such platforms are much better optimized
+for such large memory models than the Perl malloc. Some memory-hungry
+Perl applications like the PDL don't work well with Perl's malloc.
+Finally, other applications than Perl (like modperl) tend to prefer
+the system malloc. Such platforms include Alpha and 64-bit HPPA,
+MIPS, PPC, and Sparc.
+
+=head2 AIX Dynaloading
+
+The AIX dynaloading now uses in AIX releases 4.3 and newer the native
+dlopen interface of AIX instead of the old emulated interface. This
+change will probably break backward compatibility with compiled
+modules. The change was made to make Perl more compliant with other
+applications like modperl which are using the AIX native interface.
+
+=head2 Attributes for C<my> variables now handled at run-time.
+
+The C<my EXPR : ATTRS> syntax now applies variable attributes at
+run-time. (Subroutine and C<our> variables still get attributes applied
+at compile-time.) See L<attributes> for additional details. In particular,
+however, this allows variable attributes to be useful for C<tie> interfaces,
+which was a deficiency of earlier releases. Note that the new semantics
+doesn't work with the Attribute::Handlers module (as of version 0.76).
+
+=head2 Socket Extension Dynamic in VMS
+
+The Socket extension is now dynamically loaded instead of being
+statically built in. This may or may not be a problem with ancient
+TCP/IP stacks of VMS: we do not know since we weren't able to test
+Perl in such configurations.
+
+=head2 IEEE-format Floating Point Default on OpenVMS Alpha
+
+Perl now uses IEEE format (T_FLOAT) as the default internal floating
+point format on OpenVMS Alpha, potentially breaking binary compatibility
+with external libraries or existing data. G_FLOAT is still available as
+a configuration option. The default on VAX (D_FLOAT) has not changed.
+
+=head2 New Unicode Properties
+
+Unicode I<scripts> are now supported. Scripts are similar to (and superior
+to) Unicode I<blocks>. The difference between scripts and blocks is that
+scripts are the glyphs used by a language or a group of languages, while
+the blocks are more artificial groupings of (mostly) 256 characters based
+on the Unicode numbering.
+
+In general, scripts are more inclusive, but not universally so. For
+example, while the script C<Latin> includes all the Latin characters and
+their various diacritic-adorned versions, it does not include the various
+punctuation or digits (since they are not solely C<Latin>).
+
+A number of other properties are now supported, including C<\p{L&}>,
+C<\p{Any}> C<\p{Assigned}>, C<\p{Unassigned}>, C<\p{Blank}> and
+C<\p{SpacePerl}> (along with their C<\P{...}> versions, of course).
+See L<perlunicode> for details, and more additions.
+
+The C<In> or C<Is> prefix to names used with the C<\p{...}> and C<\P{...}>
+are now almost always optional. The only exception is that a C<In> prefix
+is required to signify a Unicode block when a block name conflicts with a
+script name. For example, C<\p{Tibetan}> refers to the script, while
+C<\p{InTibetan}> refers to the block. When there is no name conflict, you
+can omit the C<In> from the block name (e.g. C<\p{BraillePatterns}>), but
+to be safe, it's probably best to always use the C<In>).
+
+=head2 REF(...) Instead Of SCALAR(...)
+
+A reference to a reference now stringifies as "REF(0x81485ec)" instead
+of "SCALAR(0x81485ec)" in order to be more consistent with the return
+value of ref().
+
+=head2 pack/unpack D/F recycled
+
+The undocumented pack/unpack template letters D/F have been recycled
+for better use: now they stand for long double (if supported by the
+platform) and NV (Perl internal floating point type). (They used
+to be aliases for d/f, but you never knew that.)
+
+=head2 Deprecations
+
+=over 4
+
+=item *
+
+The semantics of bless(REF, REF) were unclear and until someone proves
+it to make some sense, it is forbidden.
+
+=item *
+
+The obsolete chat2 library that should never have been allowed
+to escape the laboratory has been decommissioned.
+
+=item *
+
+The builtin dump() function has probably outlived most of its
+usefulness. The core-dumping functionality will remain in future
+available as an explicit call to C<CORE::dump()>, but in future
+releases the behaviour of an unqualified C<dump()> call may change.
+
+=item *
+
+The very dusty examples in the eg/ directory have been removed.
+Suggestions for new shiny examples welcome but the main issue is that
+the examples need to be documented, tested and (most importantly)
+maintained.
+
+=item *
+
+The (bogus) escape sequences \8 and \9 now give an optional warning
+("Unrecognized escape passed through"). There is no need to \-escape
+any C<\w> character.
+
+=item *
+
+The list of filenames from glob() (or <...>) is now by default sorted
+alphabetically to be csh-compliant (which is what happened before
+in most UNIX platforms). (bsd_glob() does still sort platform
+natively, ASCII or EBCDIC, unless GLOB_ALPHASORT is specified.)
+
+=item *
+
+Spurious syntax errors generated in certain situations, when glob()
+caused File::Glob to be loaded for the first time, have been fixed.
+
+=item *
+
+Although "you shouldn't do that", it was possible to write code that
+depends on Perl's hashed key order (Data::Dumper does this). The new
+algorithm "One-at-a-Time" produces a different hashed key order.
+More details are in L</"Performance Enhancements">.
+
+=item *
+
+lstat(FILEHANDLE) now gives a warning because the operation makes no sense.
+In future releases this may become a fatal error.
+
+=item *
+
+The C<package;> syntax (C<package> without an argument) has been
+deprecated. Its semantics were never that clear and its
+implementation even less so. If you have used that feature to
+disallow all but fully qualified variables, C<use strict;> instead.
+
+=item *
+
+The unimplemented POSIX regex features [[.cc.]] and [[=c=]] are still
+recognised but now cause fatal errors. The previous behaviour of
+ignoring them by default and warning if requested was unacceptable
+since it, in a way, falsely promised that the features could be used.
+
+=item *
+
+The current user-visible implementation of pseudo-hashes (the weird
+use of the first array element) is deprecated starting from Perl 5.8.0
+and will be removed in Perl 5.10.0, and the feature will be
+implemented differently. Not only is the current interface rather
+ugly, but the current implementation slows down normal array and hash
+use quite noticeably. The C<fields> pragma interface will remain
+available. The I<restricted hashes> interface is expected to
+be the replacement interface (see L<Hash::Util>).
+
+=item *
+
+The syntaxes C<< @a->[...] >> and C<< %h->{...} >> have now been deprecated.
+
+=item *
+
+After years of trying the suidperl is considered to be too complex to
+ever be considered truly secure. The suidperl functionality is likely
+to be removed in a future release.
+
+=item *
+
+The long deprecated uppercase aliases for the string comparison
+operators (EQ, NE, LT, LE, GE, GT) have now been removed.
+
+=item *
+
+The tr///C and tr///U features have been removed and will not return;
+the interface was a mistake. Sorry about that. For similar
+functionality, see pack('U0', ...) and pack('C0', ...).
+
+=item *
+
+Earlier Perls treated "sub foo (@bar)" as equivalent to "sub foo (@)".
+The prototypes are now checked at compile-time for invalid characters.
+An optional warning is generated ("Illegal character in prototype...")
+but this may be upgraded to a fatal error in a future release.
+
+=back
+
+=head1 Core Enhancements
+
+=head2 PerlIO is Now The Default
+
+=over 4
+
+=item *
+
+IO is now by default done via PerlIO rather than system's "stdio".
+PerlIO allows "layers" to be "pushed" onto a file handle to alter the
+handle's behaviour. Layers can be specified at open time via 3-arg
+form of open:
+
+ open($fh,'>:crlf :utf8', $path) || ...
+
+or on already opened handles via extended C<binmode>:
+
+ binmode($fh,':encoding(iso-8859-7)');
+
+The built-in layers are: unix (low level read/write), stdio (as in
+previous Perls), perlio (re-implementation of stdio buffering in a
+portable manner), crlf (does CRLF <=> "\n" translation as on Win32,
+but available on any platform). A mmap layer may be available if
+platform supports it (mostly UNIXes).
+
+Layers to be applied by default may be specified via the 'open' pragma.
+
+See L</"Installation and Configuration Improvements"> for the effects
+of PerlIO on your architecture name.
+
+=item *
+
+File handles can be marked as accepting Perl's internal encoding of Unicode
+(UTF-8 or UTF-EBCDIC depending on platform) by a pseudo layer ":utf8" :
+
+ open($fh,">:utf8","Uni.txt");
+
+Note for EBCDIC users: the pseudo layer ":utf8" is erroneously named
+for you since it's not UTF-8 what you will be getting but instead
+UTF-EBCDIC. See L<perlunicode>, L<utf8>, and
+http://www.unicode.org/unicode/reports/tr16/ for more information.
+In future releases this naming may change.
+
+=item *
+
+File handles can translate character encodings from/to Perl's internal
+Unicode form on read/write via the ":encoding()" layer.
+
+=item *
+
+File handles can be opened to "in memory" files held in Perl scalars via:
+
+ open($fh,'>', \$variable) || ...
+
+=item *
+
+Anonymous temporary files are available without need to
+'use FileHandle' or other module via
+
+ open($fh,"+>", undef) || ...
+
+That is a literal undef, not an undefined value.
+
+=item *
+
+The list form of C<open> is now implemented for pipes (at least on UNIX):
+
+ open($fh,"-|", 'cat', '/etc/motd')
+
+creates a pipe, and runs the equivalent of exec('cat', '/etc/motd') in
+the child process.
+
+=item *
+
+If your locale environment variables (LANGUAGE, LC_ALL, LC_CTYPE, LANG)
+contain the strings 'UTF-8' or 'UTF8' (case-insensitive matching),
+the default encoding of your STDIN, STDOUT, and STDERR, and of
+B<any subsequent file open>, is UTF-8.
+
+=back
+
+=head2 Safe Signals
+
+Perl used to be fragile in that signals arriving at inopportune moments
+could corrupt Perl's internal state. Now Perl postpones handling of
+signals until it's safe (between opcodes).
+
+This change may have surprising side effects because signals no longer
+interrupt Perl instantly. Perl will now first finish whatever it was
+doing, like finishing an internal operation (like sort()) or an
+external operation (like an I/O operation), and only then look at any
+arrived signals (and before starting the next operation). No more corrupt
+internal state since the current operation is always finished first,
+but the signal may take more time to get heard. Note that breaking
+out from potentially blocking operations should still work, though.
+
+=head2 Unicode Overhaul
+
+Unicode in general should be now much more usable than in Perl 5.6.0
+(or even in 5.6.1). Unicode can be used in hash keys, Unicode in
+regular expressions should work now, Unicode in tr/// should work now,
+Unicode in I/O should work now. See L<perluniintro> for introduction
+and L<perlunicode> for details.
+
+=over 4
+
+=item *
+
+The Unicode Character Database coming with Perl has been upgraded
+to Unicode 3.1.1. For more information, see http://www.unicode.org/.
+
+=item *
+
+For developers interested in enhancing Perl's Unicode capabilities:
+almost all the UCD files are included with the Perl distribution in
+the F<lib/unicore subdirectory>. The most notable omission, for space
+considerations, is the Unihan database.
+
+=item *
+
+The properties \p{Blank} and \p{SpacePerl} have been added. "Blank" is like
+C isblank(), that is, it contains only "horizontal whitespace" (the space
+character is, the newline isn't), and the "SpacePerl" is the Unicode
+equivalent of C<\s> (\p{Space} isn't, since that includes the vertical
+tabulator character, whereas C<\s> doesn't.)
+
+See "New Unicode Properties" earlier in this document for additional
+information on changes with Unicode properties.
+
+=back
+
+=head2 Understanding of Numbers
+
+In general a lot of fixing has happened in the area of Perl's
+understanding of numbers, both integer and floating point. Since in
+many systems the standard number parsing functions like C<strtoul()>
+and C<atof()> seem to have bugs, Perl tries to work around their
+deficiencies. This results hopefully in more accurate numbers.
+
+Perl now tries internally to use integer values in numeric conversions
+and basic arithmetics (+ - * /) if the arguments are integers, and
+tries also to keep the results stored internally as integers.
+This change leads to often slightly faster and always less lossy
+arithmetics. (Previously Perl always preferred floating point numbers
+in its math.)
+
+=head2 Miscellaneous Changes
+
+=over 4
+
+=item *
+
+AUTOLOAD is now lvaluable, meaning that you can add the :lvalue attribute
+to AUTOLOAD subroutines and you can assign to the AUTOLOAD return value.
+
+=item *
+
+C<perl -d:Module=arg,arg,arg> now works (previously one couldn't pass
+in multiple arguments.)
+
+=item *
+
+The builtin dump() now gives an optional warning
+C<dump() better written as CORE::dump()>,
+meaning that by default C<dump(...)> is resolved as the builtin
+dump() which dumps core and aborts, not as (possibly) user-defined
+C<sub dump>. To call the latter, qualify the call as C<&dump(...)>.
+(The whole dump() feature is to considered deprecated, and possibly
+removed/changed in future releases.)
+
+=item *
+
+chomp() and chop() are now overridable. Note, however, that their
+prototype (as given by C<prototype("CORE::chomp")> is undefined,
+because it cannot be expressed and therefore one cannot really write
+replacements to override these builtins.
+
+=item *
+
+END blocks are now run even if you exit/die in a BEGIN block.
+Internally, the execution of END blocks is now controlled by
+PL_exit_flags & PERL_EXIT_DESTRUCT_END. This enables the new
+behaviour for Perl embedders. This will default in 5.10. See
+L<perlembed>.
+
+=item *
+
+Formats now support zero-padded decimal fields.
+
+=item *
+
+Lvalue subroutines can now return C<undef> in list context.
+However, the lvalue subroutine feature still remains experimental.
+
+=item *
+
+A lost warning "Can't declare ... dereference in my" has been
+restored (Perl had it earlier but it became lost in later releases.)
+
+=item *
+
+A new special regular expression variable has been introduced:
+C<$^N>, which contains the most-recently closed group (submatch).
+
+=item *
+
+C<no Module;> now works even if there is no "sub unimport" in the Module.
+
+=item *
+
+The numerical comparison operators return C<undef> if either operand
+is a NaN. Previously the behaviour was unspecified.
+
+=item *
+
+The following builtin functions are now overridable: each(), keys(),
+pop(), push(), shift(), splice(), unshift().
+
+=item *
+
+C<pack() / unpack()> now can group template letters with C<()> and then
+apply repetition/count modifiers on the groups.
+
+=item *
+
+C<pack() / unpack()> can now process the Perl internal numeric types:
+IVs, UVs, NVs-- and also long doubles, if supported by the platform.
+The template letters are C<j>, C<J>, C<F>, and C<D>.
+
+=item *
+
+C<pack('U0a*', ...)> can now be used to force a string to UTF8.
+
+=item *
+
+my __PACKAGE__ $obj now works.
+
+=item *
+
+The printf() and sprintf() now support parameter reordering using the
+C<%\d+\$> and C<*\d+\$> syntaxes. For example
+
+ print "%2\$s %1\$s\n", "foo", "bar";
+
+will print "bar foo\n". This feature helps in writing
+internationalised software, and in general when the order
+of the parameters can vary.
+
+=item *
+
+prototype(\&) is now available.
+
+=item *
+
+prototype(\[$@%&]) is now available to implicitly create references
+(useful for example if you want to emulate the tie() interface).
+
+=item *
+
+A new command-line option, C<-t> is available. It is the
+little brother of C<-T>: instead of dieing on taint violations,
+lexical warnings are given. B<This is only meant as a temporary
+debugging aid while securing the code of old legacy applications.
+This is not a substitute for -T.>
+
+=item *
+
+In other taint news, the C<exec LIST> and C<system LIST> have now been
+considered too risky (think C<exec @ARGV>: it can start any program
+with any arguments), and now the said forms cause a warning.
+You should carefully launder the arguments to guarantee their
+validity. In future releases of Perl the forms will become fatal
+errors so consider starting laundering now.
+
+=item *
+
+If tr/// is just counting characters, it doesn't attempt to
+modify its target.
+
+=item *
+
+untie() will now call an UNTIE() hook if it exists. See L<perltie>
+for details.
+
+=item *
+
+L<utime> now supports C<utime undef, undef, @files> to change the
+file timestamps to the current time.
+
+=item *
+
+The rules for allowing underscores (underbars) in numeric constants
+have been relaxed and simplified: now you can have an underscore
+simply B<between digits>.
+
+=item *
+
+Rather than relying on C's argv[0] (which may not contain a full pathname)
+where possible $^X is now set by asking the operating system.
+(eg by reading F</proc/self/exe> on Linux, F</proc/curproc/file> on FreeBSD)
+
+=item *
+
+A new variable, C<${^TAINT}>, indicates whether taint mode is enabled.
+
+=item *
+
+You can now override the readline() builtin, and this overrides also
+the <FILEHANDLE> angle bracket operator.
+
+=item *
+
+The command-line options -s and -F are now recognized on the shebang
+(#!) line.
+
+=back
+
+=head1 Modules and Pragmata
+
+=head2 New Modules and Pragmata
+
+=over 4
+
+=item *
+
+C<Attribute::Handlers> allows a class to define attribute handlers.
+
+ package MyPack;
+ use Attribute::Handlers;
+ sub Wolf :ATTR(SCALAR) { print "howl!\n" }
+
+ # later, in some package using or inheriting from MyPack...
+
+ my MyPack $Fluffy : Wolf; # the attribute handler Wolf will be called
+
+Both variables and routines can have attribute handlers. Handlers can
+be specific to type (SCALAR, ARRAY, HASH, or CODE), or specific to the
+exact compilation phase (BEGIN, CHECK, INIT, or END).
+
+=item *
+
+B<B::Concise> is a new compiler backend for walking the Perl syntax
+tree, printing concise info about ops, from Stephen McCamant. The
+output is highly customisable. See L<B::Concise>.
+
+=item *
+
+C<Class::ISA> for reporting the search path for a class's ISA tree,
+by Sean Burke, has been added. See L<Class::ISA>.
+
+=item *
+
+C<Cwd> has now a split personality: if possible, an XS extension is
+used, (this will hopefully be faster, more secure, and more robust)
+but if not possible, the familiar Perl implementation is used.
+
+=item *
+
+C<Devel::PPPort>, originally from Kenneth Albanowski and now
+maintained by Paul Marquess, has been added. It is primarily used
+by C<h2xs> to enhance portability of XS modules between different
+versions of Perl.
+
+=item *
+
+C<Digest>, frontend module for calculating digests (checksums), from
+Gisle Aas, has been added. See L<Digest>.
+
+=item *
+
+C<Digest::MD5> for calculating MD5 digests (checksums) as defined in
+RFC 1321, from Gisle Aas, has been added. See L<Digest::MD5>.
+
+ use Digest::MD5 'md5_hex';
+
+ $digest = md5_hex("Thirsty Camel");
+
+ print $digest, "\n"; # 01d19d9d2045e005c3f1b80e8b164de1
+
+NOTE: the C<MD5> backward compatibility module is deliberately not
+included since its further use is discouraged.
+
+=item *
+
+C<Encode>, by Nick Ing-Simmons, provides a mechanism to translate
+between different character encodings. Support for Unicode,
+ISO-8859-*, ASCII, CP*, KOI8-R, and three variants of EBCDIC are
+compiled in to the module. Several other encodings (like Chinese,
+Japanese, Korean, and MacIntosh encodings) are included and will be
+loaded at runtime. (For space considerations, the largest Chinese
+encodings have been separated into their own CPAN module,
+Encode::HanExtra). See L<Encode>.
+
+Any encoding supported by Encode module is also available to the
+":encoding()" layer if PerlIO is used.
+
+=item *
+
+C<Hash::Util> is the interface to the new I<restricted hashes>
+feature. A restricted hash is restricted to a certain set of keys,
+no keys outside the set can be added. Also individual keys can be
+restricted so that the key cannot be deleted and the value cannot be
+changed. (Implemented by Jeffrey Friedl, Nick Ing-Simmons, and
+Michael Schwern.)
+
+=item *
+
+C<I18N::Langinfo> can be use to query locale information.
+See L<I18N::Langinfo>.
+
+=item *
+
+C<I18N::LangTags> has functions for dealing with RFC3066-style
+language tags, by Sean Burke. See L<I18N::LangTags>.
+
+=item *
+
+C<ExtUtils::Constant> is a new tool for extension writers for
+generating XS code to import C header constants, by Nicholas Clark.
+See L<ExtUtils::Constant>.
+
+=item *
+
+C<Filter::Simple> is an easy-to-use frontend to Filter::Util::Call,
+from Damian Conway. See L<Filter::Simple>.
+
+ # in MyFilter.pm:
+
+ package MyFilter;
+
+ use Filter::Simple sub {
+ while (my ($from, $to) = splice @_, 0, 2) {
+ s/$from/$to/g;
+ }
+ };
+
+ 1;
+
+ # in user's code:
+
+ use MyFilter qr/red/ => 'green';
+
+ print "red\n"; # this code is filtered, will print "green\n"
+ print "bored\n"; # this code is filtered, will print "bogreen\n"
+
+ no MyFilter;
+
+ print "red\n"; # this code is not filtered, will print "red\n"
+
+=item *
+
+C<File::Temp> allows one to create temporary files and directories in
+an easy, portable, and secure way, by Tim Jenness. See L<File::Temp>.
+
+=item *
+
+C<Filter::Util::Call> provides you with the framework to write
+I<Source Filters> in Perl, from Paul Marquess. For most uses the
+frontend Filter::Simple is to be preferred. See L<Filter::Util::Call>.
+
+=item *
+
+C<if> is a new pragma for conditional inclusion of modules, from
+Ilya Zakharevich.
+
+=item *
+
+L<libnet> is a collection of perl5 modules related to network
+programming, from Graham Barr. See L<Net::FTP>, L<Net::NNTP>,
+L<Net::Ping>, L<Net::POP3>, L<Net::SMTP>, and L<Net::Time>.
+
+Perl installation leaves libnet unconfigured, use F<libnetcfg> to configure.
+
+=item *
+
+C<List::Util> is a selection of general-utility list subroutines, like
+sum(), min(), first(), and shuffle(), by Graham Barr. See L<List::Util>.
+
+=item *
+
+C<Locale::Constants>, C<Locale::Country>, C<Locale::Currency>, and
+C<Locale::Language>, from Neil Bowers, have been added. They provide the
+codes for various locale standards, such as "fr" for France, "usd" for
+US Dollar, and "jp" for Japanese.
+
+ use Locale::Country;
+
+ $country = code2country('jp'); # $country gets 'Japan'
+ $code = country2code('Norway'); # $code gets 'no'
+
+See L<Locale::Constants>, L<Locale::Country>, L<Locale::Currency>,
+and L<Locale::Language>.
+
+=item *
+
+C<Locale::Maketext> is localization framework from Sean Burke. See
+L<Locale::Maketext>, and L<Locale::Maketext::TPJ13>. The latter is an
+article about software localization, originally published in The Perl
+Journal #13, republished here with kind permission.
+
+=item *
+
+C<Memoize> can make your functions faster by trading space for time,
+from Mark-Jason Dominus. See L<Memoize>.
+
+=item *
+
+C<MIME::Base64> allows you to encode data in base64, from Gisle Aas,
+as defined in RFC 2045 - I<MIME (Multipurpose Internet Mail
+Extensions)>.
+
+ use MIME::Base64;
+
+ $encoded = encode_base64('Aladdin:open sesame');
+ $decoded = decode_base64($encoded);
+
+ print $encoded, "\n"; # "QWxhZGRpbjpvcGVuIHNlc2FtZQ=="
+
+See L<MIME::Base64>.
+
+=item *
+
+C<MIME::QuotedPrint> allows you to encode data in quoted-printable
+encoding, as defined in RFC 2045 - I<MIME (Multipurpose Internet Mail
+Extensions)>, from Gisle Aas.
+
+ use MIME::QuotedPrint;
+
+ $encoded = encode_qp("Smiley in Unicode: \x{263a}");
+ $decoded = decode_qp($encoded);
+
+ print $encoded, "\n"; # "Smiley in Unicode: =263A"
+
+MIME::QuotedPrint has been enhanced to provide the basic methods
+necessary to use it with PerlIO::Via as in :
+
+ use MIME::QuotedPrint;
+ open($fh,">Via(MIME::QuotedPrint)",$path);
+
+See L<MIME::QuotedPrint>.
+
+=item *
+
+C<NEXT> is pseudo-class for method redispatch, from Damian Conway.
+See L<NEXT>.
+
+=item *
+
+C<open> is a new pragma for setting the default I/O disciplines
+for open().
+
+=item *
+
+C<PerlIO::Scalar> provides the implementation of IO to "in memory"
+Perl scalars as discussed above, from Nick Ing-Simmons. It also
+serves as an example of a loadable PerlIO layer. Other future
+possibilities include PerlIO::Array and PerlIO::Code.
+See L<PerlIO::Scalar>.
+
+=item *
+
+C<PerlIO::Via> acts as a PerlIO layer and wraps PerlIO layer
+functionality provided by a class (typically implemented in perl
+code), from Nick Ing-Simmons.
+
+ use MIME::QuotedPrint;
+ open($fh,">Via(MIME::QuotedPrint)",$path);
+
+This will automatically convert everything output to C<$fh>
+to Quoted-Printable. See L<PerlIO::Via>.
+
+=item *
+
+C<Pod::ParseLink>, by Russ Allbery, has been added,
+to parse LZ<><> links in pods as described in the new
+perlpodspec.
+
+=item *
+
+C<Pod::Text::Overstrike>, by Joe Smith, has been added.
+It converts POD data to formatted overstrike text.
+See L<Pod::Text::Overstrike>.
+
+=item *
+
+C<Scalar::Util> is a selection of general-utility scalar subroutines,
+like blessed(), reftype(), and tainted(). See L<Scalar::Util>.
+
+=item *
+
+C<sort> is a new pragma for controlling the behaviour of sort().
+
+=item *
+
+C<Storable> gives persistence to Perl data structures by allowing the
+storage and retrieval of Perl data to and from files in a fast and
+compact binary format, from Raphael Manfredi. See L<Storable>.
+
+=item *
+
+C<Switch>, from Damian Conway, has been added. Just by saying
+
+ use Switch;
+
+you have C<switch> and C<case> available in Perl.
+
+ use Switch;
+
+ switch ($val) {
+
+ case 1 { print "number 1" }
+ case "a" { print "string a" }
+ case [1..10,42] { print "number in list" }
+ case (@array) { print "number in list" }
+ case /\w+/ { print "pattern" }
+ case qr/\w+/ { print "pattern" }
+ case (%hash) { print "entry in hash" }
+ case (\%hash) { print "entry in hash" }
+ case (\&sub) { print "arg to subroutine" }
+ else { print "previous case not true" }
+ }
+
+See L<Switch>.
+
+=item *
+
+C<Test::More> is yet another framework for writing test scripts,
+more extensive than Test::Simple, by Michael Schwern. See L<Test::More>.
+
+=item *
+
+C<Test::Simple> has basic utilities for writing tests, by Michael
+Schwern. See L<Test::Simple>.
+
+=item *
+
+C<Text::Balanced> has been added, for extracting delimited text
+sequences from strings, from Damian Conway.
+
+ use Text::Balanced 'extract_delimited';
+
+ ($a, $b) = extract_delimited("'never say never', he never said", "'", '');
+
+$a will be "'never say never'", $b will be ', he never said'.
+
+In addition to extract_delimited() there are also extract_bracketed(),
+extract_quotelike(), extract_codeblock(), extract_variable(),
+extract_tagged(), extract_multiple(), gen_delimited_pat(), and
+gen_extract_tagged(). With these you can implement rather advanced
+parsing algorithms. See L<Text::Balanced>.
+
+=item *
+
+C<threads> is an interface to interpreter threads, by Arthur Bergman.
+Interpreter threads (ithreads) is the new thread model introduced in
+Perl 5.6 but only available as an internal interface for extension
+writers (and for Win32 Perl for C<fork()> emulation). See L<threads>.
+
+=item *
+
+C<threads::shared> allows data sharing for interpreter threads, from
+Arthur Bergman. In the ithreads model any data sharing between
+threads must be explicit, as opposed to the old 5.005 thread model
+where data sharing was implicit. See L<threads::shared>.
+
+=item *
+
+C<Tie::File>, by Mark-Jason Dominus, associates a Perl array with the
+lines of a file.
+
+=item *
+
+C<Tie::Memoize>, by Ilya Zakharevich, provides on-demand loaded hashes.
+
+=item *
+
+C<Tie::RefHash::Nestable>, by Edward Avis, allows storing hash
+references (unlike the standard Tie::RefHash) The module is contained
+within Tie::RefHash, see L<Tie::RefHash>.
+
+=item *
+
+C<Time::HiRes> provides high resolution timing (ualarm, usleep,
+and gettimeofday), from Douglas E. Wegscheid. See L<Time::HiRes>.
+
+=item *
+
+C<Unicode::UCD> offers a querying interface to the Unicode Character
+Database. See L<Unicode::UCD>.
+
+=item *
+
+C<Unicode::Collate> implements the UCA (Unicode Collation Algorithm)
+for sorting Unicode strings, by SADAHIRO Tomoyuki. See L<Unicode::Collate>.
+
+=item *
+
+C<Unicode::Normalize> implements the various Unicode normalization
+forms, by SADAHIRO Tomoyuki. See L<Unicode::Normalize>.
+
+=item *
+
+C<XS::Typemap>, by Tim Jenness, is a test extension that exercises XS
+typemaps. Nothing gets installed but for extension writers the code
+is worth studying.
+
+=back
+
+=head2 Updated And Improved Modules and Pragmata
+
+=over 4
+
+=item *
+
+The following independently supported modules have been updated to the
+newest versions from CPAN: CGI, CPAN, DB_File, File::Spec, File::Temp,
+Getopt::Long, Math::BigFloat, Math::BigInt, the podlators bundle
+(Pod::Man, Pod::Text), Pod::LaTeX, Pod::Parser, Storable,
+Term::ANSIColor, Test, Text-Tabs+Wrap.
+
+=item *
+
+The attributes::reftype() now works on tied arguments.
+
+=item *
+
+AutoLoader can now be disabled with C<no AutoLoader;>.
+
+=item *
+
+B::Deparse has been significantly enhanced. It now can deparse almost
+all of the standard test suite (so that the tests still succeed).
+There is a make target "test.deparse" for trying this out.
+
+=item *
+
+Class::Struct can now define the classes in compile time.
+
+=item *
+
+Class::Struct now assigns the array/hash element if the accessor
+is called with an array/hash element as the B<sole> argument.
+
+=item *
+
+Data::Dumper has now an option to sort hashes.
+
+=item *
+
+Data::Dumper has now an option to dump code references
+using B::Deparse.
+
+=item *
+
+DB_File now supports newer Berkeley DB versions, among
+other improvements.
+
+=item *
+
+The English module can now be used without the infamous performance
+hit by saying
+
+ use English '-no_match_vars';
+
+(Assuming, of course, that one doesn't need the troublesome variables
+C<$`>, C<$&>, or C<$'>.) Also, introduced C<@LAST_MATCH_START> and
+C<@LAST_MATCH_END> English aliases for C<@-> and C<@+>.
+
+=item *
+
+Fcntl, Socket, and Sys::Syslog have been rewritten to use the
+new-style constant dispatch section (see L<ExtUtils::Constant>).
+This means that they will be more robust and hopefully faster.
+
+=item *
+
+File::Find now chdir()s correctly when chasing symbolic links.
+
+=item *
+
+File::Find now has pre- and post-processing callbacks. It also
+correctly changes directories when chasing symbolic links. Callbacks
+(naughtily) exiting with "next;" instead of "return;" now work.
+
+=item *
+
+File::Find is now (again) reentrant. It also has been made
+more portable.
+
+=item *
+
+The warnings issued by File::Find now belong to their own category.
+You can enable/disable them with C<use/no warnings 'File::Find';>.
+
+=item *
+
+File::Glob::glob() renamed to File::Glob::bsd_glob() to avoid
+prototype mismatch with CORE::glob().
+
+=item *
+
+File::Glob now supports C<GLOB_LIMIT> constant to limit the size of
+the returned list of filenames.
+
+=item *
+
+Devel::Peek now has an interface for the Perl memory statistics
+(this works only if you are using perl's malloc, and if you have
+compiled with debugging).
+
+=item *
+
+IPC::Open3 now allows the use of numeric file descriptors.
+
+=item *
+
+IO::Socket has now atmark() method, which returns true if the socket
+is positioned at the out-of-band mark. The method is also exportable
+as a sockatmark() function.
+
+=item *
+
+IO::Socket::INET has support for ReusePort option (if your platform
+supports it). The Reuse option now has an alias, ReuseAddr. For clarity
+you may want to prefer ReuseAddr.
+
+=item *
+
+IO::Socket::INET now supports C<LocalPort> of zero (usually meaning
+that the operating system will make one up.)
+
+=item *
+
+use lib now works identically to @INC. Removing directories
+with 'no lib' now works.
+
+=item *
+
+ExtUtils::MakeMaker now uses File::Spec internally, which hopefully
+leads into better portability.
+
+=item *
+
+Math::BigFloat and Math::BigInt have undergone a full rewrite.
+They are now magnitudes faster, and they support various
+bignum libraries such as GMP and PARI as their backends.
+
+=item *
+
+Math::Complex handles inf, NaN etc., better.
+
+=item *
+
+Net::Ping has been muchly enhanced. Multihoming is now supported.
+There is now "external" protocol which uses Net::Ping::External module
+which runs external ping(1) and parses the output. A version of
+Net::Ping::External is available in CPAN.
+
+=item *
+
+POSIX::sigaction() is now much more flexible and robust.
+You can now install coderef handlers, 'DEFAULT', and 'IGNORE'
+handlers, installing new handlers was not atomic.
+
+=item *
+
+In Safe the C<%INC> now localised in a Safe compartment so that
+use/require work.
+
+=item *
+
+In SDBM_File on dosish platforms, some keys went missing because of
+lack of support for files with "holes". A workaround for the problem
+has been added.
+
+=item *
+
+In Search::Dict one can now have a pre-processing hook for the
+lines being searched.
+
+=item *
+
+The Shell module now has an OO interface.
+
+=item *
+
+In Sys::Syslog there is now a failover mechanism that will go
+through alternative connection mechanisms until the message
+is successfully logged.
+
+=item *
+
+The Test module has been significantly enhanced.
+
+=item *
+
+Time::Local::timelocal() does not handle fractional seconds anymore.
+The rationale is that neither does localtime(), and timelocal() and
+localtime() are supposed to be inverses of each other.
+
+=item *
+
+The vars pragma now supports declaring fully qualified variables.
+(Something that C<our()> does not and will not support.)
+
+=item *
+
+The C<utf8::> name space (as in the pragma) provides various
+Perl-callable functions to provide low level access to Perl's
+internal Unicode representation. At the moment only length()
+has been implemented.
+
+=back
+
+=head1 Utility Changes
+
+=over 4
+
+=item *
+
+Emacs perl mode (emacs/cperl-mode.el) has been updated to version
+4.31.
+
+=item *
+
+F<emacs/e2ctags.pl> is now much faster.
+
+=item *
+
+C<h2ph> now supports C trigraphs.
+
+=item *
+
+C<h2xs> now produces a template README.
+
+=item *
+
+C<h2xs> now uses C<Devel::PPort> for better portability between
+different versions of Perl.
+
+=item *
+
+C<h2xs> uses the new L<ExtUtils::Constant> module which will affect
+newly created extensions that define constants. Since the new code is
+more correct (if you have two constants where the first one is a
+prefix of the second one, the first constant B<never> gets defined),
+less lossy (it uses integers for integer constant, as opposed to the
+old code that used floating point numbers even for integer constants),
+and slightly faster, you might want to consider regenerating your
+extension code (the new scheme makes regenerating easy).
+L<h2xs> now also supports C trigraphs.
+
+=item *
+
+C<libnetcfg> has been added to configure the libnet.
+
+=item *
+
+C<perlbug> is now much more robust. It also sends the bug report to
+perl.org, not perl.com.
+
+=item *
+
+C<perlcc> has been rewritten and its user interface (that is,
+command line) is much more like that of the UNIX C compiler, cc.
+(The perlbc tools has been removed. Use C<perlcc -B> instead.)
+
+=item *
+
+C<perlivp> is a new Installation Verification Procedure utility
+for running any time after installing Perl.
+
+=item *
+
+C<pod2html> now allows specifying a cache directory.
+
+=item *
+
+C<s2p> has been completely rewritten in Perl. (It is in fact a full
+implementation of sed in Perl: you can use the sed functionality by
+using the C<psed> utility.)
+
+=item *
+
+C<xsubpp> now understands POD documentation embedded in the *.xs files.
+
+=item *
+
+C<xsubpp> now supports OUT keyword.
+
+=back
+
+=head1 New Documentation
+
+=over 4
+
+=item *
+
+perl56delta details the changes between the 5.005 release and the
+5.6.0 release.
+
+=item *
+
+perlclib documents the internal replacements for standard C library
+functions. (Interesting only for extension writers and Perl core
+hackers.)
+
+=item *
+
+perldebtut is a Perl debugging tutorial.
+
+=item *
+
+perlebcdic contains considerations for running Perl on EBCDIC platforms.
+
+=item *
+
+perlintro is a gentle introduction to Perl.
+
+=item *
+
+perliol documents the internals of PerlIO with layers.
+
+=item *
+
+perlmodstyle is a style guide for writing modules.
+
+=item *
+
+perlnewmod tells about writing and submitting a new module.
+
+=item *
+
+perlpacktut is a pack() tutorial.
+
+=item *
+
+perlpod has been rewritten to be clearer and to record the best
+practices gathered over the years.
+
+=item *
+
+perlpodspec is a more formal specification of the pod format,
+mainly of interest for writers of pod applications, not to
+people writing in pod.
+
+=item *
+
+perlretut is a regular expression tutorial.
+
+=item *
+
+perlrequick is a regular expressions quick-start guide.
+Yes, much quicker than perlretut.
+
+=item *
+
+perltodo has been updated.
+
+=item *
+
+perltootc has been renamed as perltooc (to not to conflict
+with perltoot in filesystems restricted to "8.3" names)
+
+=item *
+
+perluniintro is an introduction to using Unicode in Perl.
+(perlunicode is more of a detailed reference and background
+information)
+
+=item *
+
+perlutil explains the command line utilities packaged with the Perl
+distribution.
+
+=back
+
+The following platform-specific documents are available before
+the installation as README.I<platform>, and after the installation
+as perlI<platform>:
+
+ perlaix perlamiga perlapollo perlbeos perlbs2000
+ perlce perlcygwin perldgux perldos perlepoc perlhpux
+ perlhurd perlmachten perlmacos perlmint perlmpeix
+ perlnetware perlos2 perlos390 perlplan9 perlqnx perlsolaris
+ perltru64 perluts perlvmesa perlvms perlvos perlwin32
+
+=over 4
+
+=item *
+
+The documentation for the POSIX-BC platform is called "BS2000", to avoid
+confusion with the Perl POSIX module.
+
+=item *
+
+The documentation for the WinCE platform is called "CE", to avoid
+confusion with the perlwin32 documentation on 8.3-restricted filesystems.
+
+=back
+
+=head1 Performance Enhancements
+
+=over 4
+
+=item *
+
+map() could get pathologically slow when the result list it generates
+is larger than the source list. The performance has been improved for
+common scenarios.
+
+=item *
+
+sort() has been changed to use primarily mergesort internally as
+opposed to the earlier quicksort. For very small lists this may
+result in slightly slower sorting times, but in general the speedup
+should be at least 20%. Additional bonuses are that the worst case
+behaviour of sort() is now better (in computer science terms it now
+runs in time O(N log N), as opposed to quicksort's Theta(N**2)
+worst-case run time behaviour), and that sort() is now stable
+(meaning that elements with identical keys will stay ordered as they
+were before the sort). See the C<sort> pragma for information.
+
+The story in more detail: suppose you want to serve yourself a little
+slice of Pi.
+
+ @digits = ( 3,1,4,1,5,9 );
+
+A numerical sort of the digits will yield (1,1,3,4,5,9), as expected.
+Which C<1> comes first is hard to know, since one C<1> looks pretty
+much like any other. You can regard this as totally trivial,
+or somewhat profound. However, if you just want to sort the even
+digits ahead of the odd ones, then what will
+
+ sort { ($a % 2) <=> ($b % 2) } @digits;
+
+yield? The only even digit, C<4>, will come first. But how about
+the odd numbers, which all compare equal? With the quicksort algorithm
+used to implement Perl 5.6 and earlier, the order of ties is left up
+to the sort. So, as you add more and more digits of Pi, the order
+in which the sorted even and odd digits appear will change.
+and, for sufficiently large slices of Pi, the quicksort algorithm
+in Perl 5.8 won't return the same results even if reinvoked with the
+same input. The justification for this rests with quicksort's
+worst case behavior. If you run
+
+ sort { $a <=> $b } ( 1 .. $N , 1 .. $N );
+
+(something you might approximate if you wanted to merge two sorted
+arrays using sort), doubling $N doesn't just double the quicksort time,
+it I<quadruples> it. Quicksort has a worst case run time that can
+grow like N**2, so-called I<quadratic> behaviour, and it can happen
+on patterns that may well arise in normal use. You won't notice this
+for small arrays, but you I<will> notice it with larger arrays,
+and you may not live long enough for the sort to complete on arrays
+of a million elements. So the 5.8 quicksort scrambles large arrays
+before sorting them, as a statistical defence against quadratic behaviour.
+But that means if you sort the same large array twice, ties may be
+broken in different ways.
+
+Because of the unpredictability of tie-breaking order, and the quadratic
+worst-case behaviour, quicksort was I<almost> replaced completely with
+a stable mergesort. I<Stable> means that ties are broken to preserve
+the original order of appearance in the input array. So
+
+ sort { ($a % 2) <=> ($b % 2) } (3,1,4,1,5,9);
+
+will yield (4,3,1,1,5,9), guaranteed. The even and odd numbers
+appear in the output in the same order they appeared in the input.
+Mergesort has worst case O(NlogN) behaviour, the best value
+attainable. And, ironically, this mergesort does particularly
+well where quicksort goes quadratic: mergesort sorts (1..$N, 1..$N)
+in O(N) time. But quicksort was rescued at the last moment because
+it is faster than mergesort on certain inputs and platforms.
+For example, if you really I<don't> care about the order of even
+and odd digits, quicksort will run in O(N) time; it's very good
+at sorting many repetitions of a small number of distinct elements.
+The quicksort divide and conquer strategy works well on platforms
+with relatively small, very fast, caches. Eventually, the problem gets
+whittled down to one that fits in the cache, from which point it
+benefits from the increased memory speed.
+
+Quicksort was rescued by implementing a sort pragma to control aspects
+of the sort. The B<stable> subpragma forces stable behaviour,
+regardless of algorithm. The B<_quicksort> and B<_mergesort>
+subpragmas are heavy-handed ways to select the underlying implementation.
+The leading C<_> is a reminder that these subpragmas may not survive
+beyond 5.8. More appropriate mechanisms for selecting the implementation
+exist, but they wouldn't have arrived in time to save quicksort.
+
+=item *
+
+Hashes now use Bob Jenkins "One-at-a-Time" hashing key algorithm
+(http://burtleburtle.net/bob/hash/doobs.html). This algorithm is
+reasonably fast while producing a much better spread of values than
+the old hashing algorithm (originally by Chris Torek, later tweaked by
+Ilya Zakharevich). Hash values output from the algorithm on a hash of
+all 3-char printable ASCII keys comes much closer to passing the
+DIEHARD random number generation tests. According to perlbench, this
+change has not affected the overall speed of Perl.
+
+=item *
+
+unshift() should now be noticeably faster.
+
+=back
+
+=head1 Installation and Configuration Improvements
+
+=head2 Generic Improvements
+
+=over 4
+
+=item *
+
+INSTALL now explains how you can configure Perl to use 64-bit
+integers even on non-64-bit platforms.
+
+=item *
+
+Policy.sh policy change: if you are reusing a Policy.sh file
+(see INSTALL) and you use Configure -Dprefix=/foo/bar and in the old
+Policy $prefix eq $siteprefix and $prefix eq $vendorprefix, all of
+them will now be changed to the new prefix, /foo/bar. (Previously
+only $prefix changed.) If you do not like this new behaviour,
+specify prefix, siteprefix, and vendorprefix explicitly.
+
+=item *
+
+A new optional location for Perl libraries, otherlibdirs, is available.
+It can be used for example for vendor add-ons without disturbing Perl's
+own library directories.
+
+=item *
+
+In many platforms the vendor-supplied 'cc' is too stripped-down to
+build Perl (basically, 'cc' doesn't do ANSI C). If this seems
+to be the case and 'cc' does not seem to be the GNU C compiler
+'gcc', an automatic attempt is made to find and use 'gcc' instead.
+
+=item *
+
+gcc needs to closely track the operating system release to avoid
+build problems. If Configure finds that gcc was built for a different
+operating system release than is running, it now gives a clearly visible
+warning that there may be trouble ahead.
+
+=item *
+
+If binary compatibility with the 5.005 release is not wanted, Configure
+no longer suggests including the 5.005 modules in @INC.
+
+=item *
+
+Configure C<-S> can now run non-interactively.
+
+=item *
+
+Configure support for pdp11-style memory models has been removed due
+to obsolescence.
+
+=item *
+
+configure.gnu now works with options with whitespace in them.
+
+=item *
+
+installperl now outputs everything to STDERR.
+
+=item *
+
+$Config{byteorder} is now computed dynamically (this is more robust
+with "fat binaries" where an executable image contains binaries for
+more than one binary platform.)
+
+=item *
+
+Because PerlIO is now the default on most platforms, "-perlio" doesn't
+get appended to the $Config{archname} (also known as $^O) anymore.
+Instead, if you explicitly choose not to use perlio (Configure command
+line option -Uuseperlio), you will get "-stdio" appended.
+
+=item *
+
+Another change related to the architecture name is that "-64all"
+(-Duse64bitall, or "maximally 64-bit") is appended only if your
+pointers are 64 bits wide. (To be exact, the use64bitall is ignored.)
+
+=item *
+
+In AFS installations one can configure the root of the AFS to be
+somewhere else than the default F</afs> by using the Configure
+parameter C<-Dafsroot=/some/where/else>.
+
+=item *
+
+APPLLIB_EXP, a less-know configuration-time definition, has been
+documented. It can be used to prepend site-specific directories
+to Perl's default search path (@INC), see INSTALL for information.
+
+=item *
+
+The version of Berkeley DB used when the Perl (and, presumably, the
+DB_File extension) was built is now available as
+C<@Config{qw(db_version_major db_version_minor db_version_patch)}>
+from Perl and as C<DB_VERSION_MAJOR_CFG DB_VERSION_MINOR_CFG
+DB_VERSION_PATCH_CFG> from C.
+
+=item *
+
+Building Berkeley DB3 for compatibility modes for DB, NDBM, and ODBM
+has been documented in INSTALL.
+
+=item *
+
+If you have CPAN access (either network or a local copy such as a
+CD-ROM) you can during specify extra modules to Configure to build and
+install with Perl using the -Dextras=... option. See INSTALL for
+more details.
+
+=item *
+
+In addition to config.over a new override file, config.arch, is
+available. That is supposed to be used by hints file writers for
+architecture-wide changes (as opposed to config.over which is for
+site-wide changes).
+
+=item *
+
+If your file system supports symbolic links you can build Perl outside
+of the source directory by
+
+ mkdir /tmp/perl/build/directory
+ cd /tmp/perl/build/directory
+ sh /path/to/perl/source/Configure -Dmksymlinks ...
+
+This will create in /tmp/perl/build/directory a tree of symbolic links
+pointing to files in /path/to/perl/source. The original files are left
+unaffected. After Configure has finished you can just say
+
+ make all test
+
+and Perl will be built and tested, all in /tmp/perl/build/directory.
+
+=item *
+
+For Perl developers several new make targets for profiling
+and debugging have been added, see L<perlhack>.
+
+=over 8
+
+=item *
+
+Use of the F<gprof> tool to profile Perl has been documented in
+L<perlhack>. There is a make target called "perl.gprof" for
+generating a gprofiled Perl executable.
+
+=item *
+
+If you have GCC 3, there is a make target called "perl.gcov" for
+creating a gcoved Perl executable for coverage analysis. See
+L<perlhack>.
+
+=item *
+
+If you are on IRIX or Tru64 platforms, new profiling/debugging options
+have been added, see L<perlhack> for more information about pixie and
+Third Degree.
+
+=back
+
+=item *
+
+Guidelines of how to construct minimal Perl installations have
+been added to INSTALL.
+
+=item *
+
+The Thread extension is now not built at all under ithreads
+(C<Configure -Duseithreads>) because it wouldn't work anyway (the
+Thread extension requires being Configured with C<-Duse5005threads>).
+
+But note that the Thread.pm interface is now shared by both
+thread models.
+
+=item *
+
+The Gconvert macro ($Config{d_Gconvert}) used by perl for stringifying
+floating-point numbers is now more picky about using sprintf %.*g
+rules for the conversion. Some platforms that used to use gcvt may
+now resort to the slower sprintf.
+
+=back
+
+=head2 New Or Improved Platforms
+
+For the list of platforms known to support Perl,
+see L<perlport/"Supported Platforms">.
+
+=over 4
+
+=item *
+
+AIX dynamic loading should be now better supported.
+
+=item *
+
+AIX should now work better with gcc, threads, and 64-bitness. Also the
+long doubles support in AIX should be better now. See L<perlaix>.
+
+=item *
+
+After a long pause, AmigaOS has been verified to be happy with Perl.
+
+=item *
+
+AtheOS (http://www.atheos.cx/) is a new platform.
+
+=item *
+
+BeOS has been reclaimed.
+
+=item *
+
+DG/UX platform now supports the 5.005-style threads. See L<perldgux>.
+
+=item *
+
+DYNIX/ptx platform (a.k.a. dynixptx) is supported at or near osvers 4.5.2.
+
+=item *
+
+EBCDIC platforms (z/OS, also known as OS/390, POSIX-BC, and VM/ESA)
+have been regained. Many test suite tests still fail and the
+co-existence of Unicode and EBCDIC isn't quite settled, but the
+situation is much better than with Perl 5.6. See L<perlos390>,
+L<perlbs2000> (for POSIX-BC), and L<perlvmesa> for more information.
+
+=item *
+
+Building perl with -Duseithreads or -Duse5005threads now works under
+HP-UX 10.20 (previously it only worked under 10.30 or later). You will
+need a thread library package installed. See README.hpux.
+
+=item *
+
+MacOS Classic (MacPerl has of course been available since
+perl 5.004 but now the source code bases of standard Perl
+and MacPerl have been synchronised)
+
+=item *
+
+MacOS X (or Darwin) should now be able to build Perl even on HFS+
+filesystems. (The case-insensitivity confused the Perl build process.)
+
+=item *
+
+NCR MP-RAS is now supported.
+
+=item *
+
+All the NetBSD specific patches (except for the installation
+specific ones) have been merged back to the main distribution.
+
+=item *
+
+NetWare from Novell is now supported. See L<perlnetware>.
+
+=item *
+
+NonStop-UX is now supported.
+
+=item *
+
+NEC SUPER-UX is now supported.
+
+=item *
+
+All the OpenBSD specific patches (except for the installation
+specific ones) have been merged back to the main distribution.
+
+=item *
+
+Perl has been tested with the GNU pth userlevel thread package
+( http://www.gnu.org/software/pth/pth.html ) . All but one thread
+test worked, and that one failure was because of test results arriving
+in unexpected order.
+
+=item *
+
+Amdahl UTS UNIX mainframe platform is now supported.
+
+=item *
+
+WinCE is now supported. See L<perlce>.
+
+=item *
+
+z/OS (formerly known as OS/390, formerly known as MVS OE) has now
+support for dynamic loading. This is not selected by default,
+however, you must specify -Dusedl in the arguments of Configure.
+
+=back
+
+=head1 Selected Bug Fixes
+
+Numerous memory leaks and uninitialized memory accesses have been
+hunted down. Most importantly anonymous subs used to leak quite
+a bit.
+
+=over 4
+
+=item *
+
+The autouse pragma didn't work for Multi::Part::Function::Names.
+
+=item *
+
+caller() could cause core dumps in certain situations. Carp was sometimes
+affected by this problem.
+
+=item *
+
+chop(@list) in list context returned the characters chopped in
+reverse order. This has been reversed to be in the right order.
+
+=item *
+
+Configure no longer includes the DBM libraries (dbm, gdbm, db, ndbm)
+when building the Perl binary. The only exception to this is SunOS 4.x,
+which needs them.
+
+=item *
+
+The behaviour of non-decimal but numeric string constants such as
+"0x23" was platform-dependent: in some platforms that was seen as 35,
+in some as 0, in some as a floating point number (don't ask). This
+was caused by Perl using the operating system libraries in a situation
+where the result of the string to number conversion is undefined: now
+Perl consistently handles such strings as zero in numeric contexts.
+
+=item *
+
+The order of DESTROYs has been made more predictable.
+
+=item *
+
+Several debugger fixes: exit code now reflects the script exit code,
+condition C<"0"> now treated correctly, the C<d> command now checks
+line number, the C<$.> no longer gets corrupted, all debugger output
+now goes correctly to the socket if RemotePort is set.
+
+=item *
+
+Perl 5.6.0 could emit spurious warnings about redefinition of dl_error()
+when statically building extensions into perl. This has been corrected.
+
+=item *
+
+L<dprofpp> -R didn't work.
+
+=item *
+
+C<*foo{FORMAT}> now works.
+=item *
+
+Infinity is now recognized as a number.
+
+=item *
+
+UNIVERSAL::isa no longer caches methods incorrectly. (This broke
+the Tk extension with 5.6.0.)
+
+=item *
+
+Lexicals I: lexicals outside an eval "" weren't resolved
+correctly inside a subroutine definition inside the eval "" if they
+were not already referenced in the top level of the eval""ed code.
+
+=item *
+
+Lexicals II: lexicals leaked at file scope into subroutines that
+were declared before the lexicals.
+
+=item *
+
+Lexical warnings now propagating correctly between scopes
+and into C<eval "...">.
+
+=item *
+
+C<use warnings qw(FATAL all)> did not work as intended. This has been
+corrected.
+
+=item *
+
+warnings::enabled() now reports the state of $^W correctly if the caller
+isn't using lexical warnings.
+
+=item *
+
+Line renumbering with eval and C<#line> now works.
+
+=item *
+
+Fixed numerous memory leaks, especially in eval "".
+
+=item *
+
+mkdir() now ignores trailing slashes in the directory name,
+as mandated by POSIX.
+
+=item *
+
+Some versions of glibc have a broken modfl(). This affects builds
+with C<-Duselongdouble>. This version of Perl detects this brokenness
+and has a workaround for it. The glibc release 2.2.2 is known to have
+fixed the modfl() bug.
+
+=item *
+
+Modulus of unsigned numbers now works (4063328477 % 65535 used to
+return 27406, instead of 27047).
+
+=item *
+
+Some "not a number" warnings introduced in 5.6.0 eliminated to be
+more compatible with 5.005. Infinity is now recognised as a number.
+
+=item *
+
+Numeric conversions did not recognize changes in the string value
+properly in certain circumstances.
+
+=item *
+
+Attributes (like :shared) didn't work with our().
+
+=item *
+
+our() variables will not cause "will not stay shared" warnings.
+
+=item *
+
+"our" variables of the same name declared in two sibling blocks
+resulted in bogus warnings about "redeclaration" of the variables.
+The problem has been corrected.
+
+=item *
+
+pack "Z" now correctly terminates the string with "\0".
+
+=item *
+
+Fix password routines which in some shadow password platforms
+(e.g. HP-UX) caused getpwent() to return every other entry.
+
+=item *
+
+The PERL5OPT environment variable (for passing command line arguments
+to Perl) didn't work for more than a single group of options.
+
+=item *
+
+PERL5OPT with embedded spaces didn't work.
+
+=item *
+
+printf() no longer resets the numeric locale to "C".
+
+=item *
+
+C<qw(a\\b)> now parses correctly as C<'a\\b'>.
+
+=item *
+
+pos() did not return the correct value within s///ge in earlier
+versions. This is now handled correctly.
+
+=item *
+
+Printing quads (64-bit integers) with printf/sprintf now works
+without the q L ll prefixes (assuming you are on a quad-capable platform).
+
+=item *
+
+Regular expressions on references and overloaded scalars now work.
+
+=item *
+
+Right-hand side magic (GMAGIC) could in many cases such as string
+concatenation be invoked too many times.
+
+=item *
+
+scalar() now forces scalar context even when used in void context.
+
+=item *
+
+SOCKS support is now much more robust.
+
+=item *
+
+sort() arguments are now compiled in the right wantarray context
+(they were accidentally using the context of the sort() itself).
+The comparison block is now run in scalar context, and the arguments
+to be sorted are always provided list context.
+
+=item *
+
+Changed the POSIX character class C<[[:space:]]> to include the (very
+rarely used) vertical tab character. Added a new POSIX-ish character
+class C<[[:blank:]]> which stands for horizontal whitespace
+(currently, the space and the tab).
+
+=item *
+
+The tainting behaviour of sprintf() has been rationalized. It does
+not taint the result of floating point formats anymore, making the
+behaviour consistent with that of string interpolation.
+
+=item *
+
+Some cases of inconsistent taint propagation (such as within hash
+values) have been fixed.
+
+=item *
+
+The RE engine found in Perl 5.6.0 accidentally pessimised certain kinds
+of simple pattern matches. These are now handled better.
+
+=item *
+
+Regular expression debug output (whether through C<use re 'debug'>
+or via C<-Dr>) now looks better.
+
+=item *
+
+Multi-line matches like C<"a\nxb\n" =~ /(?!\A)x/m> were flawed. The
+bug has been fixed.
+
+=item *
+
+Use of $& could trigger a core dump under some situations. This
+is now avoided.
+
+=item *
+
+The regular expression captured submatches ($1, $2, ...) are now
+more consistently unset if the match fails, instead of leaving false
+data lying around in them.
+
+=item *
+
+readline() on files opened in "slurp" mode could return an extra "" at
+the end in certain situations. This has been corrected.
+
+=item *
+
+Autovivification of symbolic references of special variables described
+in L<perlvar> (as in C<${$num}>) was accidentally disabled. This works
+again now.
+
+=item *
+
+Sys::Syslog ignored the C<LOG_AUTH> constant.
+
+=item *
+
+All but the first argument of the IO syswrite() method are now optional.
+
+=item *
+
+$AUTOLOAD, sort(), lock(), and spawning subprocesses
+in multiple threads simultaneously are now thread-safe.
+
+=item *
+
+Tie::ARRAY SPLICE method was broken.
+
+=item *
+
+Allow read-only string on left hand side of non-modifying tr///.
+
+=item *
+
+If C<STDERR> is tied, warnings caused by C<warn> and C<die> now
+correctly pass to it.
+
+=item *
+
+Several Unicode fixes.
+
+=over 8
+
+=item *
+
+BOMs (byte order marks) in the beginning of Perl files
+(scripts, modules) should now be transparently skipped.
+UTF-16 (UCS-2) encoded Perl files should now be read correctly.
+
+=item *
+
+The character tables have been updated to Unicode 3.1.1.
+
+=item *
+
+Comparing with utf8 data does not magically upgrade non-utf8 data
+into utf8. (This was a problem for example if you were mixing data
+from I/O and Unicode data: your output might have got magically encoded
+as UTF-8.)
+
+=item *
+
+Generating illegal Unicode code points like U+FFFE, or the UTF-16
+surrogates, now also generates an optional warning.
+
+=item *
+
+C<IsAlnum>, C<IsAlpha>, and C<IsWord> now match titlecase.
+
+=item *
+
+Concatenation with the C<.> operator or via variable interpolation,
+C<eq>, C<substr>, C<reverse>, C<quotemeta>, the C<x> operator,
+substitution with C<s///>, single-quoted UTF8, should now work.
+
+=item *
+
+The C<tr///> operator now works. Note that the C<tr///CU>
+functionality has been removed (but see pack('U0', ...)).
+
+=item *
+
+C<eval "v200"> now works.
+
+=item *
+
+Perl 5.6.0 parsed m/\x{ab}/ incorrectly, leading to spurious warnings.
+This has been corrected.
+
+=item *
+
+Zero entries were missing from the Unicode classes like C<IsDigit>.
+
+=back
+
+=item *
+
+Large unsigned numbers (those above 2**31) could sometimes lose their
+unsignedness, causing bogus results in arithmetic operations.
+
+=back
+
+=head2 Platform Specific Changes and Fixes
+
+=over 4
+
+=item *
+
+BSDI 4.*
+
+Perl now works on post-4.0 BSD/OSes.
+
+=item *
+
+All BSDs
+
+Setting C<$0> now works (as much as possible; see L<perlvar> for details).
+
+=item *
+
+Cygwin
+
+Numerous updates; currently synchronised with Cygwin 1.3.10.
+
+=item *
+
+Previously DYNIX/ptx had problems in its Configure probe for non-blocking I/O.
+
+=item *
+
+EPOC
+
+EPOC update after Perl 5.6.0. See README.epoc.
+
+=item *
+
+FreeBSD 3.*
+
+Perl now works on post-3.0 FreeBSDs.
+
+=item *
+
+HP-UX
+
+README.hpux updated; C<Configure -Duse64bitall> now works.
+
+=item *
+
+IRIX
+
+Numerous compilation flag and hint enhancements; accidental mixing
+of 32-bit and 64-bit libraries (a doomed attempt) made much harder.
+
+=item *
+
+Linux
+
+=over 8
+
+=item *
+
+Long doubles should now work (see INSTALL).
+
+=item *
+
+Linux previously had problems related to sockaddrlen when using
+accept(), revcfrom() (in Perl: recv()), getpeername(), and getsockname().
+
+=back
+
+=item *
+
+MacOS Classic
+
+Compilation of the standard Perl distribution in MacOS Classic should
+now work if you have the Metrowerks development environment and
+the missing Mac-specific toolkit bits. Contact the macperl mailing
+list for details.
+
+=item *
+
+MPE/iX
+
+MPE/iX update after Perl 5.6.0. See README.mpeix.
+
+=item *
+
+NetBSD/sparc
+
+Perl now works on NetBSD/sparc.
+
+=item *
+
+OS/2
+
+Now works with usethreads (see INSTALL).
+
+=item *
+
+Solaris
+
+64-bitness using the Sun Workshop compiler now works.
+
+=item *
+
+Tru64 (aka Digital UNIX, aka DEC OSF/1)
+
+The operating system version letter now recorded in $Config{osvers}.
+Allow compiling with gcc (previously explicitly forbidden). Compiling
+with gcc still not recommended because buggy code results, even with
+gcc 2.95.2.
+
+=item *
+
+Unicos
+
+Fixed various alignment problems that lead into core dumps either
+during build or later; no longer dies on math errors at runtime;
+now using full quad integers (64 bits), previously was using
+only 46 bit integers for speed.
+
+=item *
+
+VMS
+
+chdir() now works better despite a CRT bug; now works with MULTIPLICITY
+(see INSTALL); now works with Perl's malloc.
+
+The tainting of C<%ENV> elements via C<keys> or C<values> was previously
+unimplemented. It now works as documented.
+
+The C<waitpid> emulation has been improved. The worst bug (now fixed)
+was that a pid of -1 would cause a wildcard search of all processes on
+the system. The most significant enhancement is that we can now
+usually get the completion status of a terminated process.
+
+POSIX-style signals are now emulated much better on VMS versions prior
+to 7.0.
+
+The C<system> function and backticks operator have improved
+functionality and better error handling.
+
+File access tests now use current process privileges rather than the
+user's default privileges, which could sometimes result in a mismatch
+between reported access and actual access.
+
+=item *
+
+Windows
+
+=over 8
+
+=item *
+
+accept() no longer leaks memory.
+
+=item *
+
+Borland C++ v5.5 is now a supported compiler that can build Perl.
+However, the generated binaries continue to be incompatible with those
+generated by the other supported compilers (GCC and Visual C++).
+
+=item *
+
+Better chdir() return value for a non-existent directory.
+
+=item *
+
+Duping socket handles with open(F, ">&MYSOCK") now works under Windows 9x.
+
+=item *
+
+New %ENV entries now propagate to subprocesses.
+
+=item *
+
+Current directory entries in %ENV are now correctly propagated to child
+processes.
+
+=item *
+
+$ENV{LIB} now used to search for libs under Visual C.
+
+=item *
+
+fork() emulation has been improved in various ways, but still continues
+to be experimental. See L<perlfork> for known bugs and caveats.
+
+=item *
+
+A failed (pseudo)fork now returns undef and sets errno to EAGAIN.
+
+=item *
+
+Win32::GetCwd() correctly returns C:\ instead of C: when at the drive root.
+Other bugs in chdir() and Cwd::cwd() have also been fixed.
+
+=item *
+
+HTML files will be installed in c:\perl\html instead of c:\perl\lib\pod\html
+
+=item *
+
+The makefiles now provide a single switch to bulk-enable all the features
+enabled in ActiveState ActivePerl (a popular Win32 binary distribution).
+
+=item *
+
+Allow REG_EXPAND_SZ keys in the registry.
+
+=item *
+
+Can now send() from all threads, not just the first one.
+
+=item *
+
+Fake signal handling reenabled, bugs and all.
+
+=item *
+
+%SIG has been enabled under USE_ITHREADS, but its use is completely
+unsupported under all configurations.
+
+=item *
+
+Less stack reserved per thread so that more threads can run
+concurrently. (Still 16M per thread.)
+
+=item *
+
+C<File::Spec->tmpdir()> now prefers C:/temp over /tmp
+(works better when perl is running as service).
+
+=item *
+
+Better UNC path handling under ithreads.
+
+=item *
+
+wait(), waitpid() and backticks now return the correct exit status under
+Windows 9x.
+
+=item *
+
+winsock handle leak fixed.
+
+=item *
+
+The Perl parser has been stress tested using both random input and
+Markov chain input and the few found crashes and lockups have been
+fixed.
+
+=back
+
+=back
+
+=head1 New or Changed Diagnostics
+
+=over 4
+
+=item *
+
+The lexical warnings category "deprecated" is no longer a sub-category
+of the "syntax" category. It is now a top-level category in its own
+right.
+
+=item *
+
+All regular expression compilation error messages are now hopefully
+easier to understand both because the error message now comes before
+the failed regex and because the point of failure is now clearly
+marked by a C<E<lt>-- HERE> marker.
+
+=item *
+
+The various "opened only for", "on closed", "never opened" warnings
+drop the C<main::> prefix for filehandles in the C<main> package,
+for example C<STDIN> instead of C<main::STDIN>.
+
+=item *
+
+The "Unrecognized escape" warning has been extended to include C<\8>,
+C<\9>, and C<\_>. There is no need to escape any of the C<\w> characters.
+
+=item *
+
+Two new debugging options have been added: if you have compiled your
+Perl with debugging, you can use the -DT and -DR options to trace
+tokenising and to add reference counts to displaying variables,
+respectively.
+
+=item *
+
+The debugger (perl5db.pl) has been modified to present a more
+consistent commands interface, via (CommandSet=580). perl5db.t was
+also added to test the changes, and as a placeholder for further tests.
+
+See L<perldebug>.
+
+=item *
+
+The debugger has a new C<dumpDepth> option to control the maximum
+depth to which nested structures are dumped. The C<x> command has
+been extended so that C<x N EXPR> dumps out the value of I<EXPR> to a
+depth of at most I<N> levels.
+
+=item *
+
+The debugger can now show lexical variables if you have the CPAN
+module PadWalker installed.
+
+=item *
+
+If an attempt to use a (non-blessed) reference as an array index
+is made, a warning is given.
+
+=item *
+
+C<push @a;> and C<unshift @a;> (with no values to push or unshift)
+now give a warning. This may be a problem for generated and evaled
+code.
+
+=item *
+
+If you try to L<perlfunc/pack> a number less than 0 or larger than 255
+using the C<"C"> format you will get an optional warning. Similarly
+for the C<"c"> format and a number less than -128 or more than 127.
+
+=item *
+
+Certain regex modifiers such as C<(?o)> make sense only if applied to
+the entire regex. You will get an optional warning if you try to do
+otherwise.
+
+=item *
+
+Using arrays or hashes as references (e.g. C<< %foo->{bar} >>
+has been deprecated for a while. Now you will get an optional warning.
+
+=item *
+
+Using C<sort> in scalar context now issues an optional warning.
+This didn't do anything useful, as the sort was not performed.
+
+=back
+
+=head1 Changed Internals
+
+=over 4
+
+=item *
+
+perlapi.pod (a companion to perlguts) now attempts to document the
+internal API.
+
+=item *
+
+You can now build a really minimal perl called microperl.
+Building microperl does not require even running Configure;
+C<make -f Makefile.micro> should be enough. Beware: microperl makes
+many assumptions, some of which may be too bold; the resulting
+executable may crash or otherwise misbehave in wondrous ways.
+For careful hackers only.
+
+=item *
+
+Added rsignal(), whichsig(), do_join(), op_clear, op_null,
+ptr_table_clear(), ptr_table_free(), sv_setref_uv(), and several UTF-8
+interfaces to the publicised API. For the full list of the available
+APIs see L<perlapi>.
+
+=item *
+
+Made possible to propagate customised exceptions via croak()ing.
+
+=item *
+
+Now xsubs can have attributes just like subs. (Well, at least the
+built-in attributes.)
+
+=item *
+
+dTHR and djSP have been obsoleted; the former removed (because it's
+a no-op) and the latter replaced with dSP.
+
+=item *
+
+PERL_OBJECT has been completely removed.
+
+=item *
+
+The MAGIC constants (e.g. C<'P'>) have been macrofied
+(e.g. C<PERL_MAGIC_TIED>) for better source code readability
+and maintainability.
+
+=item *
+
+The regex compiler now maintains a structure that identifies nodes in
+the compiled bytecode with the corresponding syntactic features of the
+original regex expression. The information is attached to the new
+C<offsets> member of the C<struct regexp>. See L<perldebguts> for more
+complete information.
+
+=item *
+
+The C code has been made much more C<gcc -Wall> clean. Some warning
+messages still remain in some platforms, so if you are compiling with
+gcc you may see some warnings about dubious practices. The warnings
+are being worked on.
+
+=item *
+
+F<perly.c>, F<sv.c>, and F<sv.h> have now been extensively commented.
+
+=item *
+
+Documentation on how to use the Perl source repository has been added
+to F<Porting/repository.pod>.
+
+=item *
+
+There are now several profiling make targets.
+
+=back
+
+=head1 Security Vulnerability Closed
+
+(This change was already made in 5.7.0 but bears repeating here.)
+
+A potential security vulnerability in the optional suidperl component
+of Perl was identified in August 2000. suidperl is neither built nor
+installed by default. As of November 2001 the only known vulnerable
+platform is Linux, most likely all Linux distributions. CERT and
+various vendors and distributors have been alerted about the vulnerability.
+See http://www.cpan.org/src/5.0/sperl-2000-08-05/sperl-2000-08-05.txt
+for more information.
+
+The problem was caused by Perl trying to report a suspected security
+exploit attempt using an external program, /bin/mail. On Linux
+platforms the /bin/mail program had an undocumented feature which
+when combined with suidperl gave access to a root shell, resulting in
+a serious compromise instead of reporting the exploit attempt. If you
+don't have /bin/mail, or if you have 'safe setuid scripts', or if
+suidperl is not installed, you are safe.
+
+The exploit attempt reporting feature has been completely removed from
+Perl 5.8.0 (and the maintenance release 5.6.1, and it was removed also
+from all the Perl 5.7 releases), so that particular vulnerability
+isn't there anymore. However, further security vulnerabilities are,
+unfortunately, always possible. The suidperl functionality is most
+probably going to be removed in Perl 5.10. In any case, suidperl
+should only be used by security experts who know exactly what they are
+doing and why they are using suidperl instead of some other solution
+such as sudo (see http://www.courtesan.com/sudo/).
+
+=head1 New Tests
+
+Several new tests have been added, especially for the F<lib>
+subsection. There are now about 56 000 individual tests (spread over
+about 620 test scripts), in the regression suite (5.6.1 has about
+11700 tests, in 258 test scripts) Many of the new tests are introduced
+by the new modules, but still in general Perl is now more thoroughly
+tested.
+
+Because of the large number of tests, running the regression suite
+will take considerably longer time than it used to: expect the suite
+to take up to 4-5 times longer to run than in perl 5.6. In a really
+fast machine you can hope to finish the suite in about 6-8 minutes
+(wallclock time).
+
+The tests are now reported in a different order than in earlier Perls.
+(This happens because the test scripts from under t/lib have been moved
+to be closer to the library/extension they are testing.)
+
+=head1 Known Problems
+
+=head2 AIX
+
+=over 4
+
+=item *
+
+In AIX 4.2 Perl extensions that use C++ functions that use statics
+may have problems in that the statics are not getting initialized.
+In newer AIX releases this has been solved by linking Perl with
+the libC_r library, but unfortunately in AIX 4.2 the said library
+has an obscure bug where the various functions related to time
+(such as time() and gettimeofday()) return broken values, and
+therefore in AIX 4.2 Perl is not linked against the libC_r.
+
+=item *
+
+vac 5.0.0.0 May Produce Buggy Code For Perl
+
+The AIX C compiler vac version 5.0.0.0 may produce buggy code,
+resulting in few random tests failing, but when the failing tests
+are run by hand, they succeed. We suggest upgrading to at least
+vac version 5.0.1.0, that has been known to compile Perl correctly.
+"lslpp -L|grep vac.C" will tell you the vac version. See README.aix.
+
+=back
+
+=head2 Amiga Perl Invoking Mystery
+
+One cannot call Perl using the C<volume:> syntax, that is, C<perl -v>
+works, but for example C<bin:perl -v> doesn't. The exact reason isn't
+known but the current suspect is the F<ixemul> library.
+
+=head2 mod_perl 1.3 Doesn't Build With -D_GNU_SOURCE
+
+In Linux, building mod_perl with B<threaded> Perl 5.8.0 does not work
+because starting from 5.8.0 building a threaded Perl uses the
+-D_GNU_SOURCE flag. The Apache 1.3 sources that are built alongside
+the mod_perl don't like that flag and the compilation dies because of
+function prototype conflicts. This may or may not get fixed in later
+releases of mod_perl 1.3 or Apache 1.3 (fixing the problem in Perl is
+less likely since threaded Perl now needs the -D_GNU_SOURCE>).
+Workarounds include using non-threaded Perl and using Apache 2.0.
+An obvious workaround would be to stop the -D_GNU_SOURCE from reaching
+the Apache 1.3 sources, but as of Perl 5.8.0, the complex build system
+of mod_perl has foiled this idea.
+
+=head2 lib/ftmp-security tests warn 'system possibly insecure'
+
+Don't panic. Read INSTALL 'make test' section instead.
+
+=head2 HP-UX lib/posix Subtest 9 Fails When LP64-Configured
+
+If perl is configured with -Duse64bitall, the successful result of the
+subtest 10 of lib/posix may arrive before the successful result of the
+subtest 9, which confuses the test harness so much that it thinks the
+subtest 9 failed.
+
+=head2 Linux With Sfio Fails op/misc Test 48
+
+No known fix.
+
+=head2 Mac OS X
+
+The following tests are known to fail:
+
+ Failed Test Stat Wstat Total Fail Failed List of Failed
+ -------------------------------------------------------------------------
+ ../ext/DB_File/t/db-btree.t 0 11 ?? ?? % ??
+ ../ext/DB_File/t/db-recno.t 149 3 2.01% 61 63 65
+ ../ext/POSIX/t/posix.t 31 1 3.23% 10
+
+If you are building on a UFS partition, you will also probably see
+t/op/stat.t subtest #9 fail. This is caused by Darwin's UFS not
+supporting inode change time.
+
+=head2 z/OS (OS/390)
+
+z/OS has rather many test failures but the situation is actually
+better than it was in 5.6.0, it's just that so many new modules and
+tests have been added.
+
+ Failed Test Stat Wstat Total Fail Failed List of Failed
+ -------------------------------------------------------------------------
+ ../ext/Data/Dumper/t/dumper.t 321 2 0.62% 311 314
+ ../ext/IO/lib/IO/t/io_unix.t 5 4 80.00% 2-5
+ ../lib/utf8.t 94 13 13.83% 27 30-31 43 46 73
+ 76 79 82 85 88 91
+ 94
+ ../lib/Benchmark.t 1 256 159 1 0.63% 75
+ ../lib/ExtUtils/t/Constant.t 27 19 70.37% 5-23
+ ../lib/ExtUtils/t/Embed.t 9 9 100.00% 1-9
+ op/pat.t 864 9 1.04% 242-243 665 776
+ 785 832-834 845
+ op/sprintf.t 224 3 1.34% 98 100 136
+ op/tr.t 97 5 5.15% 63 71-74
+ uni/fold.t 767 8 1.04% 25-26 62 169 196
+ 648 697-698
+ 60 tests and 384 subtests skipped.
+
+=head2 op/sprintf tests 129 and 130
+
+The op/sprintf tests 129 and 130 are known to fail on some platforms.
+Examples include any platform using sfio, and Compaq/Tandem's NonStop-UX.
+The failing platforms do not comply with the ANSI C Standard, line
+19ff on page 134 of ANSI X3.159 1989 to be exact. (They produce
+something other than "1" and "-1" when formatting 0.6 and -0.6 using
+the printf format "%.0f", most often they produce "0" and "-0".)
+
+=head2 Failure of Thread tests
+
+B<Note that support for 5.005-style threading remains experimental
+and practically unsupported.>
+
+The following tests are known to fail due to fundamental problems in
+the 5.005 threading implementation. These are not new failures--Perl
+5.005_0x has the same bugs, but didn't have these tests.
+
+ ../ext/List/Util/t/first.t 255 65280 7 4 57.14% 2 5-7
+ ../lib/English.t 2 512 54 2 3.70% 2-3
+ ../lib/Filter/Simple/t/data.t 6 3 50.00% 1-3
+ ../lib/Filter/Simple/t/filter_onl 9 3 33.33% 1-2 5
+ ../lib/autouse.t 10 1 10.00% 4
+ op/flip.t 15 1 6.67% 15
+
+These failures are unlikely to get fixed as the 5.005-style
+threads are considered fundamentally broken.
+
+=head2 UNICOS
+
+ Failed Test Stat Wstat Total Fail Failed List of Failed
+ -------------------------------------------------------------------------
+ ../ext/Socket/socketpair.t 1 256 45 1 2.22% 12
+ ../lib/Math/Trig.t 26 1 3.85% 25
+ ../lib/warnings.t 460 1 0.22% 425
+ io/fs.t 36 1 2.78% 31
+ op/numconvert.t 1440 13 0.90% 208 509-510
+ 657-658 665-666 829-830 989-990 1149-1150
+
+=head2 UNICOS and UNICOS/mk
+
+The io/fs test #31 is failing because in UNICOS and UNICOS/mk
+truncate() cannot be used to grow the size of filehandles, only
+to reduce the size. The workaround is to truncate files instead
+of filehandles.
+
+=head2 UTS
+
+There are a few known test failures, see L<perluts>.
+
+=head2 VMS
+
+There should be no reported test failures with a default configuration,
+though there are a number of tests marked TODO that point to areas
+needing further debugging and/or porting work.
+
+=head2 Win32
+
+In multi-CPU boxes there are some problems with the I/O buffering:
+some output may appear twice. The following Win32 failures are known
+as of 5.7.3:
+
+ Failed Test Stat Wstat Total Fail Failed List of Failed
+ -------------------------------------------------------------------------
+ ..\ext/threads/t/end.t 6 4 66.67% 3-6
+
+=head2 Localising a Tied Variable Leaks Memory
+
+ use Tie::Hash;
+ tie my %tie_hash => 'Tie::StdHash';
+
+ ...
+
+ local($tie_hash{Foo}) = 1; # leaks
+
+Code like the above is known to leak memory every time the local()
+is executed.
+
+=head2 Localising Tied Arrays and Hashes Is Broken
+
+ local %tied_array;
+
+doesn't work as one would expect: the old value is restored
+incorrectly.
+
+=head2 Self-tying of Arrays and Hashes Is Forbidden
+
+Self-tying of arrays and hashes is broken in rather deep and
+hard-to-fix ways. As a stop-gap measure to avoid people from getting
+frustrated at the mysterious results (core dumps, most often) it is
+for now forbidden (you will get a fatal error even from an attempt).
+
+=head2 Building Extensions Can Fail Because Of Largefiles
+
+Some extensions like mod_perl are known to have issues with
+`largefiles', a change brought by Perl 5.6.0 in which file offsets
+default to 64 bits wide, where supported. Modules may fail to compile
+at all or compile and work incorrectly. Currently there is no good
+solution for the problem, but Configure now provides appropriate
+non-largefile ccflags, ldflags, libswanted, and libs in the %Config
+hash (e.g., $Config{ccflags_nolargefiles}) so the extensions that are
+having problems can try configuring themselves without the
+largefileness. This is admittedly not a clean solution, and the
+solution may not even work at all. One potential failure is whether
+one can (or, if one can, whether it's a good idea) link together at
+all binaries with different ideas about file offsets, all this is
+platform-dependent.
+
+=head2 Unicode Support on EBCDIC Still Spotty
+
+Though mostly working, Unicode support still has problem spots on
+EBCDIC platforms. One such known spot are the C<\p{}> and C<\P{}>
+regular expression constructs for code points less than 256: the
+pP are testing for Unicode code points, not knowing about EBCDIC.
+
+=head2 The Compiler Suite Is Still Experimental
+
+The compiler suite is slowly getting better but it continues to be
+highly experimental. Use in production environments is discouraged.
+
+=head2 The Long Double Support Is Still Experimental
+
+The ability to configure Perl's numbers to use "long doubles",
+floating point numbers of hopefully better accuracy, is still
+experimental. The implementations of long doubles are not yet
+widespread and the existing implementations are not quite mature
+or standardised, therefore trying to support them is a rare
+and moving target. The gain of more precision may also be offset
+by slowdown in computations (more bits to move around, and the
+operations are more likely to be executed by less optimised
+libraries).
+
+=head2 Seen In Perl 5.7 But Gone Now
+
+C<Time::Piece> (previously known as C<Time::Object>) was removed
+because it was felt that it didn't have enough value in it to be a
+core module. It is still a useful module, though, and is available
+from the CPAN.
=head1 Reporting Bugs
If you find what you think is a bug, you might check the articles
recently posted to the comp.lang.perl.misc newsgroup and the perl
bug database at http://bugs.perl.org. There may also be
-information at http://www.perl.com/perl/, the Perl Home Page.
+information at http://www.perl.com/, the Perl Home Page.
If you believe you have an unreported bug, please run the B<perlbug>
program included with your release. Be sure to trim your bug down