You did try the B<-w> switch, didn't you?
-=head1 BUGS
+=head2 BUGS
You cannot get the stack frame information or otherwise debug functions
that were not compiled by Perl, such as C or C++ extensions.
If you alter your @_ arguments in a subroutine (such as with B<shift>
or B<pop>, the stack backtrace will not show the original values.
+
+=head1 Debugging Perl memory usage
+
+Perl is I<very> frivolous with memory. There is a saying that to
+estimate memory usage of Perl, assume a reasonable algorithm of
+allocation, and multiply your estimages by 10. This is not absolutely
+true, but may give you a good grasp of what happens.
+
+Say, an integer cannot take less than 20 bytes of memory, a float
+cannot take less than 24 bytes, a string cannot take less than 32
+bytes (all these examples assume 32-bit architectures, the result are
+much worse on 64-bit architectures). If a variable is accessed in two
+of three different ways (which require an integer, a float, or a
+string), the memory footprint may increase by another 20 bytes. A
+sloppy malloc() implementation will make these numbers yet more.
+
+On the opposite end of the scale, a declaration like
+
+ sub foo;
+
+may take (on some versions of perl) up to 500 bytes of memory.
+
+Off-the-cuff anecdotal estimates of a code bloat give a factor around
+8. This means that the compiled form of reasonable (commented
+indented etc.) code will take approximately 8 times more than the
+disk space the code takes.
+
+There are two Perl-specific ways to analyze the memory usage:
+$ENV{PERL_DEBUG_MSTATS} and B<-DL> switch. First one is available
+only if perl is compiled with Perl's malloc(), the second one only if
+Perl compiled with C<-DDEBUGGING> (as with giving C<-D optimise=-g>
+option to F<Configure>).
+
+=head2 Using C<$ENV{PERL_DEBUG_MSTATS}>
+
+If your perl is using Perl's malloc(), and compiled with correct
+switches (this is the default), then it will print memory usage
+statistics after compiling your code (if C<$ENV{PERL_DEBUG_MSTATS}> >
+1), and before termination of the script (if
+C<$ENV{PERL_DEBUG_MSTATS}> >= 1). The report format is similar to one
+in the following example:
+
+ env PERL_DEBUG_MSTATS=2 perl -e "require Carp"
+ Memory allocation statistics after compilation: (buckets 4(4)..8188(8192)
+ 14216 free: 130 117 28 7 9 0 2 2 1 0 0
+ 437 61 36 0 5
+ 60924 used: 125 137 161 55 7 8 6 16 2 0 1
+ 74 109 304 84 20
+ Total sbrk(): 77824/21:119. Odd ends: pad+heads+chain+tail: 0+636+0+2048.
+ Memory allocation statistics after execution: (buckets 4(4)..8188(8192)
+ 30888 free: 245 78 85 13 6 2 1 3 2 0 1
+ 315 162 39 42 11
+ 175816 used: 265 176 1112 111 26 22 11 27 2 1 1
+ 196 178 1066 798 39
+ Total sbrk(): 215040/47:145. Odd ends: pad+heads+chain+tail: 0+2192+0+6144.
+
+It is possible to ask for such a statistic at arbitrary moment by
+usind Devel::Peek::mstats() (module Devel::Peek is available on CPAN).
+
+Here is the explanation of different parts of the format:
+
+=over
+
+=item C<buckets SMALLEST(APPROX)..GREATEST(APPROX)>
+
+Perl's malloc() uses bucketed allocations. Every request is rounded
+up to the closest bucket size available, and a bucket of these size is
+taken from the pool of the buckets of this size.
+
+The above line describes limits of buckets currently in use. Each
+bucket has two sizes: memory footprint, and the maximal size of user
+data which may be put into this bucket. Say, in the above example the
+smallest bucket is both sizes 4. The biggest bucket has usable size
+8188, and the memory footprint 8192.
+
+With debugging Perl some buckets may have negative usable size. This
+means that these buckets cannot (and will not) be used. For greater
+buckets the memory footprint may be one page greater than a power of
+2. In such a case the corresponding power of two is printed instead
+in the C<APPROX> field above.
+
+=item Free/Used
+
+The following 1 or 2 rows of numbers correspond to the number of
+buckets of each size between C<SMALLEST> and C<GREATEST>. In the
+first row the sizes (memory footprints) of buckets are powers of two
+(or possibly one page greater). In the second row (if present) the
+memory footprints of the buckets are between memory footprints of two
+buckets "above".
+
+Say, with the above example the memory footprints are (with current
+algorith)
+
+ free: 8 16 32 64 128 256 512 1024 2048 4096 8192
+ 4 12 24 48 80
+
+With non-C<DEBUGGING> perl the buckets starting from C<128>-long ones
+have 4-byte overhead, thus 8192-long bucket may take up to
+8188-byte-long allocations.
+
+=item C<Total sbrk(): SBRKed/SBRKs:CONTINUOUS>
+
+The first two fields give the total amount of memory perl sbrk()ed,
+and number of sbrk()s used. The third number is what perl thinks
+about continuity of returned chunks. As far as this number is
+positive, malloc() will assume that it is probable that sbrk() will
+provide continuous memory.
+
+The amounts sbrk()ed by external libraries is not counted.
+
+=item C<pad: 0>
+
+The amount of sbrk()ed memory needed to keep buckets aligned.
+
+=item C<heads: 2192>
+
+While memory overhead of bigger buckets is kept inside the bucket, for
+smaller buckets it is kept in separate areas. This field gives the
+total size of these areas.
+
+=item C<chain: 0>
+
+malloc() may want to subdivide a bigger bucket into smaller buckets.
+If only a part of the deceased-bucket is left non-subdivided, the rest
+is kept as an element of a linked list. This field gives the total
+size of these chunks.
+
+=item C<tail: 6144>
+
+To minimize amount of sbrk()s malloc() asks for more memory. This
+field gives the size of the yet-unused part, which is sbrk()ed, but
+never touched.
+
+=back
+
+=head2 Example of using B<-DL> switch
+
+Below we show how to analyse memory usage by
+
+ do 'lib/auto/POSIX/autosplit.ix';
+
+The file in question contains a header and 146 lines similar to
+
+ sub getcwd ;
+
+B<Note:> I<the discussion below supposes 32-bit architecture. In the
+newer versions of perl the memory usage of the constructs discussed
+here is much improved, but the story discussed below is a real-life
+story. This story is very terse, and assumes more than cursory
+knowledge of Perl internals.>
+
+Here is the itemized list of Perl allocations performed during parsing
+of this file:
+
+ !!! "after" at test.pl line 3.
+ Id subtot 4 8 12 16 20 24 28 32 36 40 48 56 64 72 80 80+
+ 0 02 13752 . . . . 294 . . . . . . . . . . 4
+ 0 54 5545 . . 8 124 16 . . . 1 1 . . . . . 3
+ 5 05 32 . . . . . . . 1 . . . . . . . .
+ 6 02 7152 . . . . . . . . . . 149 . . . . .
+ 7 02 3600 . . . . . 150 . . . . . . . . . .
+ 7 03 64 . -1 . 1 . . 2 . . . . . . . . .
+ 7 04 7056 . . . . . . . . . . . . . . . 7
+ 7 17 38404 . . . . . . . 1 . . 442 149 . . 147 .
+ 9 03 2078 17 249 32 . . . . 2 . . . . . . . .
+
+
+To see this list insert two C<warn('!...')> statements around the call:
+
+ warn('!');
+ do 'lib/auto/POSIX/autosplit.ix';
+ warn('!!! "after"');
+
+and run it with B<-DL> option. The first warn() will print memory
+allocation info before the parsing of the file, and will memorize the
+statistics at this point (we ignore what it prints). The second warn()
+will print increments w.r.t. this memorized statistics. This is the
+above printout.
+
+Different I<Id>s on the left correspond to different subsystems of
+perl interpreter, they are just first argument given to perl memory
+allocation API New(). To find what C<9 03> means C<grep> the perl
+source for C<903>. You will see that it is F<util.c>, function
+savepvn(). This function is used to store a copy of existing chunk of
+memory. Using C debugger, one can see that it is called either
+directly from gv_init(), or via sv_magic(), and gv_init() is called
+from gv_fetchpv() - which is called from newSUB().
+
+B<Note:> to reach this place in debugger and skip all the calls to
+savepvn during the compilation of the main script, set a C breakpoint
+in Perl_warn(), C<continue> this point is reached, I<then> set
+breakpoint in Perl_savepvn(). Note that you may need to skip a
+handful of Perl_savepvn() which do not correspond to mass production
+of CVs (there are more C<903> allocations than 146 similar lines of
+F<lib/auto/POSIX/autosplit.ix>). Note also that C<Perl_> prefixes are
+added by macroization code in perl header files to avoid conflicts
+with external libraries.
+
+Anyway, we see that C<903> ids correspond to creation of globs, twice
+per glob - for glob name, and glob stringification magic.
+
+Here are explanations for other I<Id>s above:
+
+=over
+
+=item C<717>
+
+is for creation of bigger C<XPV*> structures. In the above case it
+creates 3 C<AV> per subroutine, one for a list of lexical variable
+names, one for a scratchpad (which contains lexical variables and
+C<targets>), and one for the array of scratchpads needed for
+recursion.
+
+It also creates a C<GV> and a C<CV> per subroutine (all called from
+start_subparse()).
+
+=item C<002>
+
+Creates C array corresponding to the C<AV> of scratchpads, and the
+scratchpad itself (the first fake entry of this scratchpad is created
+though the subroutine itself is not defined yet).
+
+It also creates C arrays to keep data for the stash (this is one HV,
+but it grows, thus there are 4 big allocations: the big chunks are not
+freeed, but are kept as additional arenas for C<SV> allocations).
+
+=item C<054>
+
+creates a C<HEK> for the name of the glob for the subroutine (this
+name is a key in a I<stash>).
+
+Big allocations with this I<Id> correspond to allocations of new
+arenas to keep C<HE>.
+
+=item C<602>
+
+creates a C<GP> for the glob for the subroutine.
+
+=item C<702>
+
+creates the C<MAGIC> for the glob for the subroutine.
+
+=item C<704>
+
+creates I<arenas> which keep SVs.
+
+=back
+
+=head2 B<-DL> details
+
+If Perl is run with B<-DL> option, then warn()s which start with `!'
+behave specially. They print a list of I<categories> of memory
+allocations, and statistics of allocations of different sizes for
+these categories.
+
+If warn() string starts with
+
+=over
+
+=item C<!!!>
+
+print changed categories only, print the differences in counts of allocations;
+
+=item C<!!>
+
+print grown categories only; print the absolute values of counts, and totals;
+
+=item C<!>
+
+print nonempty categories, print the absolute values of counts and totals.
+
+=back
+
+=head2 Limitations of B<-DL> statistic
+
+If an extension or an external library does not use Perl API to
+allocate memory, these allocations are not counted.
+
+=cut
projects / p5sagit/p5-mst-13.2.git / blobdiff