If you invoke Perl with the B<-d> switch, your script runs under the
Perl source debugger. This works like an interactive Perl
environment, prompting for debugger commands that let you examine
-source code, set breakpoints, get stack backtraces, change the values of
+source code, set breakpoints, get stack back-traces, change the values of
variables, etc. This is so convenient that you often fire up
the debugger all by itself just to test out Perl constructs
interactively to see what they do. For example:
DB> |h
+You may change the pager which is used via C<O pager=...> command.
+
=item p expr
Same as C<print {$DB::OUT} expr> in the current package. In particular,
-since this is just Perl's own B<print> function, this means that nested
+because this is just Perl's own B<print> function, this means that nested
data structures and objects are not dumped, unlike with the C<x> command.
+The C<DB::OUT> filehandle is opened to F</dev/tty>, regardless of
+where STDOUT may be redirected to.
+
=item x expr
-Evals its expression in list context and dumps out the result
+Evaluates its expression in list context and dumps out the result
in a pretty-printed fashion. Nested data structures are printed out
recursively, unlike the C<print> function.
=item T
-Produce a stack backtrace. See below for details on its output.
+Produce a stack back-trace. See below for details on its output.
=item s [expr]
statement, descending into subroutine calls. If an expression is
supplied that includes function calls, it too will be single-stepped.
-=item n
+=item n [expr]
Next. Executes over subroutine calls, until it reaches the beginning
-of the next statement.
+of the next statement. If an expression is supplied that includes
+function calls, those functions will be executed with stops before
+each statement.
=item E<lt>CRE<gt>
=item l min-max
-List lines C<min> through C<max>.
+List lines C<min> through C<max>. C<l -> is synonymous to C<->.
=item l line
=item f filename
-Switch to viewing a different file.
+Switch to viewing a different file or eval statement. If C<filename>
+is not a full filename as found in values of %INC, it is considered as
+a regexp.
=item /pattern/
Set a breakpoint. If line is omitted, sets a breakpoint on the line
that is about to be executed. If a condition is specified, it's
evaluated each time the statement is reached and a breakpoint is taken
-only if the condition is true. Breakpoints may only be set on lines
+only if the condition is true. Breakpoints may be set on only lines
that begin an executable statement. Conditions don't use B<if>:
b 237 $x > 30
=item b load filename
-Set breakpoint at the first executed line of the file.
+Set breakpoint at the first executed line of the file. Filename should
+be a full name as found in values of %INC.
+
+=item b compile subname
+
+Sets breakpoint at the first statement executed after the subroutine
+is compiled.
=item d [line]
Set an action to be done before the line is executed.
The sequence of steps taken by the debugger is
-=over 3
-
-=item 1
-
-check for a breakpoint at this line
-
-=item 2
-
-print the line if necessary (tracing)
-
-=item 3
-
-do any actions associated with that line
-
-=item 4
-
-prompt user if at a breakpoint or in single-step
-
-=item 5
-
-evaluate line
-
-=back
+ 1. check for a breakpoint at this line
+ 2. print the line if necessary (tracing)
+ 3. do any actions associated with that line
+ 4. prompt user if at a breakpoint or in single-step
+ 5. evaluate line
For example, this will print out C<$foo> every time line
53 is passed:
=over 12
-=item recallCommand, ShellBang
+=item C<recallCommand>, C<ShellBang>
The characters used to recall command or spawn shell. By
default, these are both set to C<!>.
-=item pager
+=item C<pager>
Program to use for output of pager-piped commands (those
beginning with a C<|> character.) By default,
C<$ENV{PAGER}> will be used.
-=item tkRunning
+=item C<tkRunning>
Run Tk while prompting (with ReadLine).
-=item signalLevel, warnLevel, dieLevel
+=item C<signalLevel>, C<warnLevel>, C<dieLevel>
-Level of verbosity.
+Level of verbosity. By default the debugger is in a sane verbose mode,
+thus it will print backtraces on all the warnings and die-messages
+which are going to be printed out, and will print a message when
+interesting uncaught signals arrive.
-=item AutoTrace
+To disable this behaviour, set these values to 0. If C<dieLevel> is 2,
+then the messages which will be caught by surrounding C<eval> are also
+printed.
-Where to print all the breakable points in the executed program
-(similar to C<t> command, but can be put into C<PERLDB_OPTS>).
+=item C<AutoTrace>
-=item LineInfo
+Trace mode (similar to C<t> command, but can be put into
+C<PERLDB_OPTS>).
-File or pipe to print line number info to. If it is a
-pipe, then a short, "emacs like" message is used.
+=item C<LineInfo>
+
+File or pipe to print line number info to. If it is a pipe (say,
+C<|visual_perl_db>), then a short, "emacs like" message is used.
=item C<inhibit_exit>
affects printing messages on entry and exit from subroutines. If
C<frame & 2> is false, messages are printed on entry only. (Printing
-on exit may be useful if interdispersed with other messages.)
+on exit may be useful if inter(di)spersed with other messages.)
If C<frame & 4>, arguments to functions are printed as well as the
-context and caller info.
+context and caller info. If C<frame & 8>, overloaded C<stringify> and
+C<tie>d C<FETCH> are enabled on the printed arguments. The length at
+which the argument list is truncated is governed by the next option:
+
+=item C<maxTraceLen>
+
+length at which the argument list is truncated when C<frame> option's
+bit 4 is set.
=back
=over 12
-=item arrayDepth, hashDepth
+=item C<arrayDepth>, C<hashDepth>
Print only first N elements ('' for all).
-=item compactDump, veryCompact
+=item C<compactDump>, C<veryCompact>
-Change style of array and hash dump.
+Change style of array and hash dump. If C<compactDump>, short array
+may be printed on one line.
-=item globPrint
+=item C<globPrint>
Whether to print contents of globs.
-=item DumpDBFiles
+=item C<DumpDBFiles>
Dump arrays holding debugged files.
-=item DumpPackages
+=item C<DumpPackages>
Dump symbol tables of packages.
-=item quote, HighBit, undefPrint
+=item C<quote>, C<HighBit>, C<undefPrint>
+
+Change style of string dump. Default value of C<quote> is C<auto>, one
+can enable either double-quotish dump, or single-quotish by setting it
+to C<"> or C<'>. By default, characters with high bit set are printed
+I<as is>.
+
+=item C<UsageOnly>
-Change style of string dump.
+I<very> rudimentally per-package memory usage dump. Calculates total
+size of strings in variables in the package.
=back
Example rc file:
- &parse_options("NonStop=1 LineInfo=db.out AutoTrace");
+ &parse_options("NonStop=1 LineInfo=db.out AutoTrace");
The script will run without human intervention, putting trace information
into the file I<db.out>. (If you interrupt it, you would better reset
The TTY to use for debugging I/O.
-=item noTTY
-
-If set, goes in C<NonStop> mode. On interrupt if TTY is not set uses the
-value of C<noTTY> or "/tmp/perldbtty$$" to find TTY using
-C<Term::Rendezvous>. Current variant is to have the name of TTY in this
-file.
-
=item C<noTTY>
-If set, goes in C<NonStop> mode, and would not connect to a TTY. If
+If set, goes in C<NonStop> mode, and would not connect to a TTY. If
interrupt (or if control goes to debugger via explicit setting of
$DB::signal or $DB::single from the Perl script), connects to a TTY
specified by the C<TTY> option at startup, or to a TTY found at
This module should implement a method C<new> which returns an object
with two methods: C<IN> and C<OUT>, returning two filehandles to use
-for debugging input and output correspondingly. Method C<new> may
+for debugging input and output correspondingly. Method C<new> may
inspect an argument which is a value of C<$ENV{PERLDB_NOTTY}> at
startup, or is C<"/tmp/perldbtty$$"> otherwise.
Here's an example of using the C<$ENV{PERLDB_OPTS}> variable:
- $ PERLDB_OPTS="N f=2" perl -d myprogram
+ $ PERLDB_OPTS="N f=2" perl -d myprogram
will run the script C<myprogram> without human intervention, printing
out the call tree with entry and exit points. Note that C<N f=2> is
-equivalent to C<NonStop=1 frame=2>. Note also that at the moment when
+equivalent to C<NonStop=1 frame=2>. Note also that at the moment when
this documentation was written all the options to the debugger could
be uniquely abbreviated by the first letter (with exception of
C<Dump*> options).
Other examples may include
- $ PERLDB_OPTS="N f A L=listing" perl -d myprogram
+ $ PERLDB_OPTS="N f A L=listing" perl -d myprogram
- runs script non-interactively, printing info on each entry into a
subroutine and each executed line into the file F<listing>. (If you
"interactive"!)
- $ env "PERLDB_OPTS=R=0 TTY=/dev/ttyc" perl -d myprogram
+ $ env "PERLDB_OPTS=R=0 TTY=/dev/ttyc" perl -d myprogram
may be useful for debugging a program which uses C<Term::ReadLine>
-itself. Do not forget detach shell from the TTY in the window which
+itself. Do not forget detach shell from the TTY in the window which
corresponds to F</dev/ttyc>, say, by issuing a command like
- $ sleep 1000000
+ $ sleep 1000000
See L<"Debugger Internals"> below for more details.
+=over 12
+
=item E<lt> [ command ]
Set an action (Perl command) to happen before every debugger prompt.
-A multiline command may be entered by backslashing the newlines. If
+A multi-line command may be entered by backslashing the newlines. If
C<command> is missing, resets the list of actions.
=item E<lt>E<lt> command
Add an action (Perl command) to happen before every debugger prompt.
-A multiline command may be entered by backslashing the newlines.
+A multi-line command may be entered by backslashing the newlines.
=item E<gt> command
Set an action (Perl command) to happen after the prompt when you've
-just given a command to return to executing the script. A multiline
+just given a command to return to executing the script. A multi-line
command may be entered by backslashing the newlines. If C<command> is
missing, resets the list of actions.
=item E<gt>E<gt> command
Adds an action (Perl command) to happen after the prompt when you've
-just given a command to return to executing the script. A multiline
+just given a command to return to executing the script. A multi-line
command may be entered by backslashing the newlines.
=item { [ command ]
Set an action (debugger command) to happen before every debugger prompt.
-A multiline command may be entered by backslashing the newlines. If
+A multi-line command may be entered by backslashing the newlines. If
C<command> is missing, resets the list of actions.
=item {{ command
Add an action (debugger command) to happen before every debugger prompt.
-A multiline command may be entered by backslashing the newlines.
+A multi-line command may be entered by backslashing the newlines.
=item ! number
to exit the debugger, though typing C<exit> twice may do it too.
Set an C<O>ption C<inhibit_exit> to 0 if you want to be able to I<step
-off> the end the script. You may also need to set C<$finished> to 0 at
+off> the end the script. You may also need to set C<$finished> to 0 at
some moment if you want to step through global destruction.
=item R
your history across this, but internal settings and command line options
may be lost.
-Currently the following setting are preserved: history, breakpoints
-and actions, debugger C<O>ptions and the following command-line
-options: B<-w>, B<-I>, B<-e>.
+Currently the following setting are preserved: history, breakpoints,
+actions, debugger C<O>ptions, and the following command-line
+options: B<-w>, B<-I>, and B<-e>.
=item |dbcmd
=item = [alias value]
-Define a command alias, or list current aliases.
+Define a command alias, like
+
+ = quit q
+
+or list current aliases.
=item command
Execute command as a Perl statement. A missing semicolon will be
supplied.
-=item p expr
+=item m expr
-Same as C<print DB::OUT expr>. The DB::OUT filehandle is opened to
-/dev/tty, regardless of where STDOUT may be redirected to.
+The expression is evaluated, and the methods which may be applied to
+the result are listed.
+
+=item m package
+
+The methods which may be applied to objects in the C<package> are listed.
=back
+=head2 Debugger input/output
+
+=over 8
+
+=item Prompt
+
The debugger prompt is something like
DB<8>
DB<<17>>
where that number is the command number, which you'd use to access with
-the built-in B<csh>-like history mechanism, e.g. C<!17> would repeat
+the built-in B<csh>-like history mechanism, e.g., C<!17> would repeat
command number 17. The number of angle brackets indicates the depth of
the debugger. You could get more than one set of brackets, for example, if
you'd already at a breakpoint and then printed out the result of a
function call that itself also has a breakpoint, or you step into an
expression via C<s/n/t expression> command.
+=item Multi-line commands
+
If you want to enter a multi-line command, such as a subroutine
-definition with several statements, you may escape the newline that would
-normally end the debugger command with a backslash. Here's an example:
+definition with several statements, or a format, you may escape the
+newline that would normally end the debugger command with a backslash.
+Here's an example:
DB<1> for (1..4) { \
cont: print "ok\n"; \
Note that this business of escaping a newline is specific to interactive
commands typed into the debugger.
-Here's an example of what a stack backtrace might look like:
+=item Stack backtrace
+
+Here's an example of what a stack back-trace via C<T> command might
+look like:
$ = main::infested called from file `Ambulation.pm' line 10
@ = Ambulation::legs(1, 2, 3, 4) called from file `camel_flea' line 7
C<main::pests> was called in a scalar context, also from I<camel_flea>,
but from line 4.
+Note that if you execute C<T> command from inside an active C<use>
+statement, the backtrace will contain both C<L<perlfunc/require>>
+frame and an C<L<perlfunc/eval EXPR>>) frame.
+
+=item Listing
+
+Listing given via different flavors of C<l> command looks like this:
+
+ DB<<13>> l
+ 101: @i{@i} = ();
+ 102:b @isa{@i,$pack} = ()
+ 103 if(exists $i{$prevpack} || exists $isa{$pack});
+ 104 }
+ 105
+ 106 next
+ 107==> if(exists $isa{$pack});
+ 108
+ 109:a if ($extra-- > 0) {
+ 110: %isa = ($pack,1);
+
+Note that the breakable lines are marked with C<:>, lines with
+breakpoints are marked by C<b>, with actions by C<a>, and the
+next executed line is marked by C<==E<gt>>.
+
+=item Frame listing
+
+When C<frame> option is set, debugger would print entered (and
+optionally exited) subroutines in different styles.
+
+What follows is the start of the listing of
+
+ env "PERLDB_OPTS=f=1 N" perl -d -V
+
+=over 4
+
+=item 1
+
+ entering main::BEGIN
+ entering Config::BEGIN
+ Package lib/Exporter.pm.
+ Package lib/Carp.pm.
+ Package lib/Config.pm.
+ entering Config::TIEHASH
+ entering Exporter::import
+ entering Exporter::export
+ entering Config::myconfig
+ entering Config::FETCH
+ entering Config::FETCH
+ entering Config::FETCH
+ entering Config::FETCH
+
+=item 2
+
+ entering main::BEGIN
+ entering Config::BEGIN
+ Package lib/Exporter.pm.
+ Package lib/Carp.pm.
+ exited Config::BEGIN
+ Package lib/Config.pm.
+ entering Config::TIEHASH
+ exited Config::TIEHASH
+ entering Exporter::import
+ entering Exporter::export
+ exited Exporter::export
+ exited Exporter::import
+ exited main::BEGIN
+ entering Config::myconfig
+ entering Config::FETCH
+ exited Config::FETCH
+ entering Config::FETCH
+ exited Config::FETCH
+ entering Config::FETCH
+
+=item 4
+
+ in $=main::BEGIN() from /dev/nul:0
+ in $=Config::BEGIN() from lib/Config.pm:2
+ Package lib/Exporter.pm.
+ Package lib/Carp.pm.
+ Package lib/Config.pm.
+ in $=Config::TIEHASH('Config') from lib/Config.pm:644
+ in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/nul:0
+ in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from li
+ in @=Config::myconfig() from /dev/nul:0
+ in $=Config::FETCH(ref(Config), 'package') from lib/Config.pm:574
+ in $=Config::FETCH(ref(Config), 'baserev') from lib/Config.pm:574
+ in $=Config::FETCH(ref(Config), 'PATCHLEVEL') from lib/Config.pm:574
+ in $=Config::FETCH(ref(Config), 'SUBVERSION') from lib/Config.pm:574
+ in $=Config::FETCH(ref(Config), 'osname') from lib/Config.pm:574
+ in $=Config::FETCH(ref(Config), 'osvers') from lib/Config.pm:574
+
+=item 6
+
+ in $=main::BEGIN() from /dev/nul:0
+ in $=Config::BEGIN() from lib/Config.pm:2
+ Package lib/Exporter.pm.
+ Package lib/Carp.pm.
+ out $=Config::BEGIN() from lib/Config.pm:0
+ Package lib/Config.pm.
+ in $=Config::TIEHASH('Config') from lib/Config.pm:644
+ out $=Config::TIEHASH('Config') from lib/Config.pm:644
+ in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/nul:0
+ in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/
+ out $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/
+ out $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/nul:0
+ out $=main::BEGIN() from /dev/nul:0
+ in @=Config::myconfig() from /dev/nul:0
+ in $=Config::FETCH(ref(Config), 'package') from lib/Config.pm:574
+ out $=Config::FETCH(ref(Config), 'package') from lib/Config.pm:574
+ in $=Config::FETCH(ref(Config), 'baserev') from lib/Config.pm:574
+ out $=Config::FETCH(ref(Config), 'baserev') from lib/Config.pm:574
+ in $=Config::FETCH(ref(Config), 'PATCHLEVEL') from lib/Config.pm:574
+ out $=Config::FETCH(ref(Config), 'PATCHLEVEL') from lib/Config.pm:574
+ in $=Config::FETCH(ref(Config), 'SUBVERSION') from lib/Config.pm:574
+
+=item 14
+
+ in $=main::BEGIN() from /dev/nul:0
+ in $=Config::BEGIN() from lib/Config.pm:2
+ Package lib/Exporter.pm.
+ Package lib/Carp.pm.
+ out $=Config::BEGIN() from lib/Config.pm:0
+ Package lib/Config.pm.
+ in $=Config::TIEHASH('Config') from lib/Config.pm:644
+ out $=Config::TIEHASH('Config') from lib/Config.pm:644
+ in $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/nul:0
+ in $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/E
+ out $=Exporter::export('Config', 'main', 'myconfig', 'config_vars') from lib/E
+ out $=Exporter::import('Config', 'myconfig', 'config_vars') from /dev/nul:0
+ out $=main::BEGIN() from /dev/nul:0
+ in @=Config::myconfig() from /dev/nul:0
+ in $=Config::FETCH('Config=HASH(0x1aa444)', 'package') from lib/Config.pm:574
+ out $=Config::FETCH('Config=HASH(0x1aa444)', 'package') from lib/Config.pm:574
+ in $=Config::FETCH('Config=HASH(0x1aa444)', 'baserev') from lib/Config.pm:574
+ out $=Config::FETCH('Config=HASH(0x1aa444)', 'baserev') from lib/Config.pm:574
+
+=back
+
+In all the cases indentation of lines shows the call tree, if bit 2 of
+C<frame> is set, then a line is printed on exit from a subroutine as
+well, if bit 4 is set, then the arguments are printed as well as the
+caller info, if bit 8 is set, the arguments are printed even if they
+are tied or references.
+
+When a package is compiled, a line like this
+
+ Package lib/Carp.pm.
+
+is printed with proper indentation.
+
+=back
+
+=head2 Debugging compile-time statements
+
If you have any compile-time executable statements (code within a BEGIN
block or a C<use> statement), these will C<NOT> be stopped by debugger,
although C<require>s will (and compile-time statements can be traced
command. The C<$DB::trace> variable should be set to 1 to simulate
having typed the C<t> command.
+Another way to debug compile-time code is to start debugger, set a
+breakpoint on I<load> of some module thusly
+
+ DB<7> b load f:/perllib/lib/Carp.pm
+ Will stop on load of `f:/perllib/lib/Carp.pm'.
+
+and restart debugger by C<R> command (if possible). One can use C<b
+compile subname> for the same purpose.
+
=head2 Debugger Customization
Most probably you not want to modify the debugger, it contains enough
-hooks to satisfy most needs. You may change the behaviour of debugger
+hooks to satisfy most needs. You may change the behaviour of debugger
from the debugger itself, using C<O>ptions, from the command line via
C<PERLDB_OPTS> environment variable, and from I<customization files>.
parse_options("NonStop=1 LineInfo=db.out AutoTrace=1 frame=2");
-(the code is executed in the package C<DB>). Note that F<.perldb> is
-processed before processing C<PERLDB_OPTS>. If F<.perldb> defines the
+(the code is executed in the package C<DB>). Note that F<.perldb> is
+processed before processing C<PERLDB_OPTS>. If F<.perldb> defines the
subroutine C<afterinit>, it is called after all the debugger
-initialization ends. F<.perldb> may be contained in the current
+initialization ends. F<.perldb> may be contained in the current
directory, or in the C<LOGDIR>/C<HOME> directory.
If you want to modify the debugger, copy F<perl5db.pl> from the Perl
have full editing capabilities much like GNU I<readline>(3) provides.
Look for these in the F<modules/by-module/Term> directory on CPAN.
+A rudimentary command-line completion is also available.
+Unfortunately, the names of lexical variables are not available for
+completion.
+
=head2 Editor Support for Debugging
If you have GNU B<emacs> installed on your system, it can interact with
=head2 Debugger support in perl
-When you call the B<caller> function from package DB, Perl sets the
-C<@DB::args> array to contain the arguments that stack frame was called
-with.
+When you call the B<caller> function (see L<perlfunc/caller>) from the
+package DB, Perl sets the array @DB::args to contain the arguments the
+corresponding stack frame was called with.
If perl is run with B<-d> option, the following additional features
are enabled:
=item *
The array C<@{"_<$filename"}> is the line-by-line contents of
-$filename for all the compiled files. Same for C<eval>ed strings which
-contain subroutines, or which are currently executed. The C<$filename>
+$filename for all the compiled files. Same for C<eval>ed strings which
+contain subroutines, or which are currently executed. The C<$filename>
for C<eval>ed strings looks like C<(eval 34)>.
=item *
The hash C<%{"_<$filename"}> contains breakpoints and action (it is
keyed by line number), and individual entries are settable (as opposed
-to the whole hash). Only true/false is important to Perl, though the
+to the whole hash). Only true/false is important to Perl, though the
values used by F<perl5db.pl> have the form
-C<"$break_condition\0$action">. Values are magical in numeric context:
+C<"$break_condition\0$action">. Values are magical in numeric context:
they are zeros if the line is not breakable.
Same for evaluated strings which contain subroutines, or which are
-currently executed. The C<$filename> for C<eval>ed strings looks like
+currently executed. The C<$filename> for C<eval>ed strings looks like
C<(eval 34)>.
=item *
-The scalar C<${"_<$filename"}> contains C<"_<$filename">. Same for
+The scalar C<${"_<$filename"}> contains C<"_<$filename">. Same for
evaluated strings which contain subroutines, or which are currently
-executed. The C<$filename> for C<eval>ed strings looks like C<(eval
+executed. The C<$filename> for C<eval>ed strings looks like C<(eval
34)>.
=item *
After each C<require>d file is compiled, but before it is executed,
C<DB::postponed(*{"_<$filename"})> is called (if subroutine
-C<DB::postponed> exists). Here the $filename is the expanded name of
+C<DB::postponed> exists). Here the $filename is the expanded name of
the C<require>d file (as found in values of C<%INC>).
=item *
After each subroutine C<subname> is compiled existence of
-C<$DB::postponed{subname}> is checked. If this key exists,
+C<$DB::postponed{subname}> is checked. If this key exists,
C<DB::postponed(subname)> is called (if subroutine C<DB::postponed>
exists).
=item *
A hash C<%DB::sub> is maintained, with keys being subroutine names,
-values having the form C<filename:startline-endline>. C<filename> has
+values having the form C<filename:startline-endline>. C<filename> has
the form C<(eval 31)> for subroutines defined inside C<eval>s.
=item *
-When an exection of the application reaches a place that can have a
-breakpoint, a call to C<DB::DB()> is performed if any one of
-variables $DB::trace, $DB::single, $DB::signal is true. (Note that
+When execution of the application reaches a place that can have
+a breakpoint, a call to C<DB::DB()> is performed if any one of
+variables $DB::trace, $DB::single, or $DB::signal is true. (Note that
these variables are not C<local>izable.) This feature is disabled when
the control is inside C<DB::DB()> or functions called from it (unless
-C<$^D & 1 E<lt>E<lt> 30>).
+C<$^D & (1E<lt>E<lt>30)>).
=item *
-When an exection of the application reaches a subroutine call, a call
+When execution of the application reaches a subroutine call, a call
to C<&DB::sub>(I<args>) is performed instead, with C<$DB::sub> being
the name of the called subroutine. (Unless the subroutine is compiled
in the package C<DB>.)
=back
Note that no subroutine call is possible until C<&DB::sub> is defined
-(for subroutines outside of package C<DB>). (In fact, for the
-standard debugger the same is true if C<$DB::deep> (how many levels of
-recursion deep into the debugger you can go before a mandatory break)
-is not defined.)
+(for subroutines outside of package C<DB>). (This restriction is
+recently lifted.)
+
+(In fact, for the standard debugger the same is true if C<$DB::deep>
+(how many levels of recursion deep into the debugger you can go before
+a mandatory break) is not defined.)
+
+With the recent updates the minimal possible debugger consists of one
+line
+
+ sub DB::DB {}
+
+which is quite handy as contents of C<PERL5DB> environment
+variable:
+
+ env "PERL5DB=sub DB::DB {}" perl -d your-script
+
+Another (a little bit more useful) minimal debugger can be created
+with the only line being
+
+ sub DB::DB {print ++$i; scalar <STDIN>}
+
+This debugger would print the sequential number of encountered
+statement, and would wait for your C<CR> to continue.
+
+The following debugger is quite functional:
+
+ {
+ package DB;
+ sub DB {}
+ sub sub {print ++$i, " $sub\n"; &$sub}
+ }
+
+It prints the sequential number of subroutine call and the name of the
+called subroutine. Note that C<&DB::sub> should be compiled into the
+package C<DB>.
=head2 Debugger Internals
define a subroutine C<&afterinit> to be executed after the debugger is
initialized.
-After the rc file is read, the debugger reads environment variable
+After the rc file is read, the debugger reads environment variable
PERLDB_OPTS and parses it as a rest of C<O ...> line in debugger prompt.
It also maintains magical internal variables, such as C<@DB::dbline>,
C<%DB::dbline>, which are aliases for C<@{"::_<current_file"}>
-C<%{"::_<current_file"}>. Here C<current_file> is the currently
+C<%{"::_<current_file"}>. Here C<current_file> is the currently
selected (with the debugger's C<f> command, or by flow of execution)
file.
-Some functions are provided to simplify customization. See L<"Debugger
-Customization"> for description of C<DB::parse_options(string)>. The
+Some functions are provided to simplify customization. See L<"Debugger
+Customization"> for description of C<DB::parse_options(string)>. The
function C<DB::dump_trace(skip[, count])> skips the specified number
of frames, and returns an array containing info about the caller
-frames (all if C<count> is missing). Each entry is a hash with keys
+frames (all if C<count> is missing). Each entry is a hash with keys
C<context> (C<$> or C<@>), C<sub> (subroutine name, or info about
-eval), C<args> (C<undef> or a reference to an array), C<file> and
+eval), C<args> (C<undef> or a reference to an array), C<file>, and
C<line>.
The function C<DB::print_trace(FH, skip[, count[, short]])> prints
-formatted info about caller frames. The last two functions may be
+formatted info about caller frames. The last two functions may be
convenient as arguments to C<E<lt>>, C<E<lt>E<lt>> commands.
=head2 Other resources
that were not compiled by Perl, such as C or C++ extensions.
If you alter your @_ arguments in a subroutine (such as with B<shift>
-or B<pop>, the stack backtrace will not show the original values.
-
-Some subroutines are called without creating a call frame. This may
-confuse backtrace C<T> and output of C<fE<gt>=4>.
+or B<pop>, the stack back-trace will not show the original values.
projects / p5sagit/p5-mst-13.2.git / blobdiff